Speedway #7434

Year by year

Inspections

1. Nov 19, 2025 Routine · No items found

   No violations cited.

2. Nov 20, 2024 Routine · 1 priority, 1 priority foundation, 7 core
   • Serious Priority

     PLUMBING - BACKFLOW PREVENTION - AIR GAP

     Observed no air gap provided on walk in cooler drainage pipe. Instructed manager to remove the funnel that is screwed into the floorthe drainage pipe of the walk in cooler feeds into.Manager will place a work order in to remove the metal funnel and have an air gap for the walk in cooler.

     Correction: Provide an air gap on water supply side to protect water supply.

     Code 5-202.13

   • Not serious Priority Foundation Corrected on site

     HAND DRYING PROVISION

     Observed no single-use toweling or other hand drying device available at employee handwashing sink for hand drying infront of store. Informed manager and manager placed a box of paper towel near handwashing sink. Manager also got delivered today a paper towel dispenser and have it installed.

     Correction: Provide single-use toweling or other approved devices at employee handwashing sink to facilitate proper handwashing.

     Code 6-301.12

   • Not serious Core Corrected on site

     FOOD CONTAMINATION PREVENTED - MISCELLANEOUS CONTAMINATION

     Package bacon is not protected from potential contamination. Observed packaged was stored underneath employee food in 1 dr prep cooler in kitchen. Informed manager and manager had employee remove employee food. Manager will educate all employees and have employee designated food storage area.

     Correction: Discard food item.

     Code 3-307.11

   • Not serious Core

     EQUIPMENT AND UTENSILS - NONFOOD CONTACT SURFACES - CONSTRUCTED

     Observed the sealent of 3 comp sink and wall is coming off. Instructed manager to repair or replace damaged sealent. Manager will place a work order in.

     Correction: Provide non-food contact surfaces that are constructed of a corrosion resistant, nonabsorbent, and smooth material.

     Code 4-101.19

   • Not serious Core

     EQUIPMENT AND UTENSILS - NONFOOD CONTACT SURFACES - CONSTRUCTED

     Observed shelfing units in the dry storage area is damaged and paint is chipping. Instructed manager to repair or replace damaged shelfing unit. Manager will place a work order in.

     Correction: Provide non-food contact surfaces that are constructed of a corrosion resistant, nonabsorbent, and smooth material.

     Code 4-101.19

   • Not serious Core

     EQUIPMENT AND UTENSILS - GOOD REPAIR

     Observed walk in coolers, 3 dr upright freezer, and 1 dr upright cooler gauge thermometers for coolant are not maintained in good repair.Gauges are not functional. Instructed manager to repair or replace all non functioning tempertaure gauages. Manager will place a work order in. Manager stated they base all the temperatures of coolers and freezers by internal thermometers and employee monitor it.

     Correction: Repair equipment to good condition or remove from premise.

     Code 4-501.11 (A)

   • Not serious Core

     NON-FOOD CONTACT SURFACES - CLEANING FREQUENCY

     The underneath parts of the soda machine station in the cabinets are not cleaned on a frequent basis. Observed accumulation of debris inunderneath parts of the soda machine station. Instructed manager to increase the cleaning frequency of the underneath parts of the soda machine station in the cabinets. Manager will have employee clean them.

     Correction: Clean all equipment on a routine basis to prevent accumulation of soil residues.

     Code 4-602.13

   • Not serious Core

     NON-FOOD CONTACT SURFACES - CLEANING FREQUENCY

     The cappunico machine station is not cleaned on a frequent basis.Observed accumulation of debris underneath cappuccino machines and around the dispensing nozzles. Instructed manager to increase the cleaning frequency of the underneath parts of the cappuccino machine station. Manager will have employee clean them.

     Correction: Clean all equipment on a routine basis to prevent accumulation of soil residues.

     Code 4-602.13

   • Not serious Core

     NON-FOOD CONTACT SURFACES - CLEANING FREQUENCY

     The slushie machine station is not cleaned on a frequent basis.Observed accumulation of debris around the dispensing nozzles. Instructed manager to increase the cleaning frequency of the slushie machine station. Manager will have employee clean them.

     Correction: Clean all equipment on a routine basis to prevent accumulation of soil residues.

     Code 4-602.13

   • Not serious Core

     FLOORS, WALLS AND CEILINGS - CLEANABILITY

     The floor tiles leading into walk in coolers, near front door and around aisles are chipping and cracking. Instructed manager to repair or replace chipping and cracking floor tiles. Manager will place a work order in.

     Correction: Provide floors, walls, and ceilings that are designed, constructed, and installed so they are smooth and easily cleanable.

     Code 6-201.11

   • Not serious Core Corrected on site

     HANDWASHING SIGNAGE

     Observed no handwashing signage provided at handwashing sink infront of store. Informed manager and manager placed sign near handwashing sink.

     Correction: Provide handwashing signage at all handwashing sinks used by food employees.

     Code 6-301.14

   • Not serious Core

     CLEANING, FREQUENCY AND RESTRICTIONS

     Observed the floor outside of the walk in cooler and inside the walk in cooler accumulating debris. Instructed manager to increase the cleaning frequency of the floors outside and inside of walk in cooler. Manager will have employee clean the floors.

     Correction: Clean the physical facilities at a frequency necessary to keep them clean.

     Code 6-501.12

3. Mar 12, 2024 Routine · No items found

   No violations cited.