Kwik Trip #356

Year by year

Inspections

1. Mar 5, 2026 Routine · 1 priority foundation, 2 core, 1 repeat
   • Not serious Priority Foundation

     FOOD CONTACT SURFACES - SOILED

     Various kitchen food-contact items, tools, and parts were found kept in storage bins with accumulations of dried food debris and residue.

     Correction: Increase frequency of cleaning of efficacy of cleaning methods to prevent debris and residue accumulation.

     Code 4-601.11 (A)

   • Not serious Core

     FOOD CONTAMINATION PREVENTED FROM PREMISE - CLEAN AND DRY LOCATION

     Condensation drips in walk-in freezer observed having dripped onto primary and secondary packaging of various kinds of food products.

     Correction: Store all food items in areas which are clean and dry and not subject to contamination.

     Code 3-305.11 (A) (1)

   • Not serious Core Repeat

     NON-FOOD CONTACT SURFACES - CLEAN

     Numerous kitchen bins for the storage of food-contact items observed with accumulations of food debris and residue. Retail area condiment packet bins contain excess food debris.

     Correction: Clean and remove dust, dirt, food residue, and other debris from all non-food contact surfaces of equipment.

     Code 4-601.11 (C)

2. Feb 24, 2025 Routine · 1 priority, 4 core, 1 repeat
   • Serious Priority

     PLUMBING - BACKFLOW PREVENTION - AIR GAP

     Retail area ice machine drain pipe is not equipped with a full air gap.

     Correction: Modify air break so that end of drain pipe is above flood rim.

     Code 5-202.13

   • Not serious Core

     FOOD CONTAMINATION PREVENTED FROM PREMISE - NOT EXPOSED TO SPLASH AND DUST

     Ceiling of retail walk-in freezer has area of condensation that thaws and drips onto product cases and primary packaging, creating cross-contamination points.

     Correction: Store food in areas not exposed to splash, dust, or other contamination until condensation is resolved.

     Code 3-305.11 (A) (2)

   • Not serious Core Corrected on site

     THERMOMETERS - FUNCTIONALITY - INTEGRAL OR PERMANENTLY AFFIXED MEASURING DEVICE

     Hot-hold cabinet for to-go orders is not equipped with a thermometer for the monitoring of ambient temperatures.

     Correction: Provide a integral or permanently affixed temperature measuring device.

     Code 4-204.112 (B)

   • Not serious Core Repeat

     NON-FOOD CONTACT SURFACES - CLEAN

     Bins holding paper boxes contain dried food debris. Several kitchen utensil bins have a sticky residue on exterior surface. Inside surface of creamer dispenser contains mildew and discoloration near seal. Kitchen walk-in freezer has moderate debris on floor under storage racks.

     Correction: Clean and remove dust, dirt, food residue, and other debris from all non-food contact surfaces of equipment.

     Code 4-601.11 (C)

   • Not serious Core

     INSECTS AND RODENTS - OUTER OPENINGS - SOLID, SELF-CLOSING AND TIGHT FITTING DOORS

     Rear receiving door has gap of approximately 3/4 inch along bottom that fails to prevent potential entrance of pests.

     Correction: Provide a self-closing and tight fitting door to prevent the entrance of insects or rodents.

     Code 6-202.15 (A) (3)

3. Jun 27, 2024 Routine · 1 core
   • Not serious Core

     NON-FOOD CONTACT SURFACES - CLEAN

     The floor under the rubber mats of the walk-in freezer are soiled accummulated debris.

     Correction: Clean and remove dust, dirt, food residue, and other debris from all non-food contact surfaces of equipment.

     Code 4-601.11 (C)

4. Jun 23, 2023 Routine · 1 core
   • Not serious Core

     NON-FOOD CONTACT SURFACES - CLEAN

     Inside of microwave for public use was soiled.

     Correction: Clean and remove dust, dirt, food residue, and other debris from all non-food contact surfaces of equipment.

     Code 4-601.11 (C)