Corner And More Store

Year by year

Inspections

1. Sep 8, 2026 Routine · 1 priority foundation
   • Not serious Priority Foundation Corrected on site

     RTE/TCS FOOD - PROPER DATE MARKING

     TCS foods in prep cooler from day prior missing date marks.

     Correction: Adjust method or procedures so that all ready-to-eat time/temperature control for safety food, if required, are provided with date marking or an effective method of identifying when a food item has exceeded 7 days. Discard improperly date marked food or food that has past the 7 day shelf life. Action Taken: Date marks provided during inspection.

     Code 3-501.17 (A)

2. Jan 20, 2026 Pre-inspection · 1 priority foundation, 3 core
   • Not serious Priority Foundation

     HAND DRYING PROVISION

     No single-use toweling or other hand drying device available at employee handwashing sink for hand drying.

     Correction: Provide single-use toweling or other approved devices at employee handwashing sink to facilitate proper handwashing.

     Code 6-301.12

   • Not serious Core

     CERTIFIED FOOD MANAGER – REQUIREMENT - FOOD ESTABLISHMENTS

     There is no approved or current certified food manager for this establishment.

     Correction: Provide an approved certified food protection manager in the food establishment within 90 days.

     Code 12-201.11 (A) (1)

   • Not serious Core

     HANDWASHING SINKS, INSTALLATION - NON-HAND OPERATED

     Handwashing sink is not non-hand operated.

     Correction: Employee handwashing sinks shall be non hand operated and if metered shall provide a flow of water without the need for reactivation for at least 15 seconds.

     Code 5-202.12 (C)

   • Not serious Core

     SURFACE CHARACTERISTICS - INDOOR AREAS

     1. Wall dividing kitchen area from store is covered in contact paper. 2. Piece of raw wood observed under hand sink. 3. Raw wood observed at the top of divider wall. 4. Holes observed in FRP (fiberglass reinsorced plastic) where brackets were added, and were not sealed.

     Correction: Repair area or replace with approved materials. Walls, floors and ceilings shall be smooth, durable and easily cleanable. If located in areas subject to moisture they shall also be non-absorbent.

     Code 6-101.11