Doughboy's Chgo Enterprises LLC

Year by year

Inspections

1. Jun 30, 2026 License Re-Inspection · Pass — Risk 1 (High)
   • Severity not stated

     THERMOMETERS PROVIDED & ACCURATE

     4-204.112(B) OBSERVED NO AMBIENT AIR THERMOMETERS INSIDE THE REACH IN COOLERS AND DISPLAY COOLERS. INSTRUCTED TO PROVIDE CONSPICUOUS AND EASILY READABLE THERMOMETERS INSIDE ALL REFRIGERATOR UNITS TO PROPERLY MONITOR THE AMBIENT AIR TEMPERATURE OF EQUIPMENT.

2. May 29, 2026 License · Fail — Risk 1 (High)
   • Not serious Priority Foundation

     PROCEDURES FOR RESPONDING TO VOMITING AND DIARRHEAL EVENTS

     OBSERVED FACILITY WITHOUT A BODILY FLUID SPILL KIT AND NO CORRESPONDING CLEAN UP PROCEDURE FOR RESPONDING TO VOMITING AND DIARRHEAL EVENTS. INSTRUCTED FACILITY TO DEVELOP A CLEAN-UP PROCEDURE AND MAINTAIN APPROPRIATE SUPPLIES THAT CORRESPOND WITH ON-SITE PLAN. MUST KEEP BOTH THE POLICY AND SUPPLIES ON SITE AT ALL TIMES.PRIORITY FOUNDATION VIOLATION #7-38-005.

   • Serious Priority

     FOOD-CONTACT SURFACES: CLEANED & SANITIZED

     OBSERVED HIGH TEMPERATURE WAREWASHING MACHINE NOT MEETING HOT WATER SANITIZER REQUIREMENTS OF AT LEAST 180F FOR THE FINAL RINSE TEMPERATURE. PRIORITY VIOLATION #7-38-025.

   • Serious Priority

     PROPER COOLING METHODS USED; ADEQUATE EQUIPMENT FOR TEMPERATURE CONTROL

     "NOTED TEMPERATURE OF 2-DOOR REACH IN PREP COOLER TO BE IMPROPER AT 75.5F AND TWO DOOR REFRIGERATOR AT 51.5F. INSTRUCTED NOT TO USE UNTIL EQUIPMENT IS MAINTAINING PROPER TEMPERATURE OF 41F AND BELOW. PERSON IN CHARGE SERVICED COOLER UNIT DURING INSPECTION. COOLER UNIT WAS OBSERVED AT 41F AT THE CONCLUSION OF INSPECTION. PRIORITY VIOLATION #7-38-005.

   • Severity not stated

     THERMOMETERS PROVIDED & ACCURATE

     OBSERVED NO AMBIENT AIR THERMOMETERS INSIDE THE REACH IN COOLERS AND DISPLAY COOLERS. INSTRUCTED TO PROVIDE CONSPICUOUS AND EASILY READABLE THERMOMETERS INSIDE ALL REFRIGERATOR UNITS TO PROPERLY MONITOR THE AMBIENT AIR TEMPERATURE OF EQUIPMENT.

   • Not serious Priority Foundation

     WAREWASHING FACILITIES: INSTALLED, MAINTAINED & USED; TEST STRIPS

     OBSERVED NO TEMPERATURE MEASURING DEVICE TO TEST UTENSIL SURFACE TEMPERATURE IN HIGH TEMPERATURE DISH MACHINE. INSTRUCTED MANAGER TO PROVIDE AND MAINTAIN. PRIORITY FOUNDATION 7-38-005