Quad Graphics
1900 W SUMNER ST, Hartford, WI 53027 · Washington County
Establishment
- Type
- Restaurant (retail food serving meals) (Retail Food - Serving Meals)
- Inspected by
- Washington Ozaukee Public Health
- License / ID
- HSAT-7QWUBZ
- Status
- Permitted
- Phone
- (262) 673-1210
- Official record
- Washington Ozaukee Public Health inspection reports
Year by year
| Year | Inspections | Violations | Serious |
|---|---|---|---|
| 2026 | 1 | 0 | 0 |
| 2025 | 1 | 1 | 1 |
| 2024 | 1 | 6 | 0 |
| 2023 | 1 | 5 | 0 |
Inspections
-
Jun 8, 2026 Routine · No items found
No violations cited.
-
Jun 23, 2025 Routine · 1 priority
-
Serious
Priority
Corrected on site
TCS FOOD - COLD HOLDING
Various food items in the QBD on counter display cooler were measured at 55-60 degrees. Food items were removed from the cooler at the time of the inspection.
Correction: Maintain cold time/temperature control for safety food at or below 41°F. Discard unsafe food items. Cooler is to remain offline until it is properly operating at 41 degrees or below.
Code 3-501.16 (A) (2) AND (B)
-
Serious
Priority
Corrected on site
-
Jun 19, 2024 Routine · 1 priority foundation, 5 core, 2 repeat
-
Not serious
Priority Foundation
FOOD CONTACT SURFACES - MECHANICAL WAREWASHING EQUIPMENT, HOT WATER SANITIZATION TEMPERATURES
Water temperature for the sanitization rinse in the high temperature warewashing machine is at 120° F.
Correction: Adjust the water temperature so the hot water is between 180°Fand 194 °F or have the unit serviced immediately. All warewashing must be done in the 4 compartment sink until dishwasher is serviced and operating at proper temperatures.
Code 4-501.112
-
Not serious
Core
Repeat
FOOD LABELS - LABEL INFORMATION
Packaged Tuna pasta salad, cut fresh fruit and other salads stored in the dining space upright display cooler are observed without basic ingredients on the label.
Correction: Label information shall include: common name of food and ingredients in order of predominance.
Code 3-602.11 (B) (1)-(4), (6) and (7)
-
Not serious
Core
Repeat
WAREWASHING - MECHANICAL HOT WATER - TEMPERATURE MEASURING DEVICES
An irreversible registering thermometer or high heat indicator testing strips/stickers are not provided for measuring utensil surface temperatures in the hot water mechanical warewashing operation.
Correction: Provide an irreversible registering thermometer or high heat indicator testing strips/stickers.
Code 4-302.13 (B)
-
Not serious
Core
NON-FOOD CONTACT SURFACES - CLEANING FREQUENCY
There is a severe accumulation of ice in the walk in freezer.
Correction: Clean all equipment on a routine basis to prevent accumulation of soil residues. Defrost or scrape the ice accumulations on a more frequent basis.
Code 4-602.13
-
Not serious
Core
FLOORS, WALLS AND CEILINGS - CLEANABILITY
The bottom of the wall behind the ice machine is heavily damaged and exposing areas without base coving and raw sheetrock.
Correction: Provide floors, walls, and ceilings that are designed, constructed, and installed so they are smooth and easily cleanable.
Code 6-201.11
-
Not serious
Core
FLOOR AND WALL JUNCTURES, COVED, AND ENCLOSED OR SEALED
Floor and wall juncture behind the ice machine is not coved.
Correction: Provide base coving.
Code 6-201.13 (A)
-
Not serious
Priority Foundation
-
Jun 20, 2023 Routine · 1 priority foundation, 4 core, 1 repeat
-
Not serious
Priority Foundation
Repeat
WAREWASHING - SANITIZING SOLUTION - TESTING DEVICES
A non-expired quaternary ammonium sanitizer test kit is not available for checking sanitizer concentrations.
Correction: Provide a test kit or other device for measuring the concentration of sanitizing solutions.
Code 4-302.14
-
Not serious
Core
FOOD LABELS - LABEL INFORMATION
Sandwiches and Pre-Made salads are missing common ingredient labeling.
Correction: Label information shall include: common name of food, ingredients in order of predominance, quantity, name of business or manufacturer.
Code 3-602.11 (B) (1)-(4), (6) and (7)
-
Not serious
Core
WAREWASHING - MECHANICAL HOT WATER - TEMPERATURE MEASURING DEVICES
High Temperature stickers/indicator strips were not available at the time of the inspection to verify high temperatures within the dishwasher.
Correction: Provide an irreversible registering thermometer.
Code 4-302.13 (B)
-
Not serious
Core
EQUIPMENT AND UTENSILS - PROPER ADJUSTMENT
The door gasket on the QBD cooler is not properly adjusted, intact or tight.
Correction: Equipment components shall be kept intact, tight, and properly adjusted.
Code 4-501.11 (B)
-
Not serious
Core
NON-FOOD CONTACT SURFACES - CLEAN
There is an accumulation of ice in the Walk in Freezer.
Correction: Clean and remove dust, dirt, food residue, and other debris from all non-food contact surfaces of equipment.
Code 4-601.11 (C)
-
Not serious
Priority Foundation
Repeat
Source: Washington Ozaukee Public Health. History last read Nov 20, 2026. Violation text is the inspector's wording. “Serious” is the source's own top tier. About this data.