RecordWell Data

The Forge

2102 HWY 164, Richfield, WI 53076 · Washington County

9cited violations
9serious tier
3inspections

Establishment

Type
Restaurant (retail food serving meals) (Retail Food - Serving Meals)
Inspected by
Washington Ozaukee Public Health
License / ID
JLEY-DSBLMB
Status
Permitted
Official record
Washington Ozaukee Public Health inspection reports

Other public records for this business

Year by year

YearInspectionsViolationsSerious
2026399

Inspections

  1. Oct 8, 2026 Follow Up · 3 priority, 3 repeat
    • Serious Priority Repeat Corrected on site

      TCS FOOD - COLD HOLDING

      Routine: All food items located in the tabletop prep cooler on the main grill line were held at 50-51F. The unit was displaying a proper temperature on the display. Follow up: The cooler display noted 40F. An internal ambient air thermometer showed 44F. TCS pickles were at 40F. Sour cream was found to 49F.

      Correction: Routine: Maintain cold time/temperature control for safety food at or below 41°F. The cooler internal thermometer may not be functional leading the warm unit to not turn on the compressor. Follow up: the cooler is not operating properly. The sour cream was discarded.

      Code 3-501.16 (A) (2) AND (B)

    • Serious Priority Repeat

      PLUMBING - BACKFLOW PREVENTION DEVICE - DESIGN STANDARD

      The mop sink is missing backflow prevention devices. The sink should have an ASSE 1011 or ASSE 1052 along with a pressure bleed device (wasting tee) since the sink is connected to a ASSE 1055 chemical dispenser via a permanent hose connection.

      Correction: Provide a State of Wisconsin approved backflow prevention device. View ASSE summary on 1055 devices.

      Code 5-202.14

    • Serious Priority Repeat

      PLUMBING - BACKFLOW PREVENTION DEVICE - WHEN REQUIRED

      A beverage dispensing device (coffee) is plumbed into the water supply system and is not provided with a backflow prevention device.

      Correction: Provide backflow prevention device. Plumbing systems shall be provided with backflow prevention at each point of use in the food establishment.

      Code 5-203.14

  2. Sep 28, 2026 Routine · 4 priority
    • Serious Priority

      TCS FOOD - COLD HOLDING

      All food items located in the tabletop prep cooler on the main grill line were held at 50-51F. The unit was displaying a proper temperature on the display.

      Correction: Maintain cold time/temperature control for safety food at or below 41°F. The cooler internal thermometer may not be functional leading the warm unit to not turn on the compressor.

      Code 3-501.16 (A) (2) AND (B)

    • Serious Priority

      FOOD CONTACT SURFACES - WAREWASHING EQUIPMENT, CHEMICAL, TEMPERATURE, pH, CONCENTRATION AND HARDNESS

      The facility has two dilution dispensers set up to dilute a lactic acid cleaner sanitizer. One of the dispensers (installed at the 3 comp sink) is not pulling any or only a negligable amount of product into the dilution. Test strips did not register a reading.

      Correction: Repair or adjust warewashing equipment to provide proper sanitizer concentration.

      Code 4-501.114 (A) - (E)

    • Serious Priority

      PLUMBING - BACKFLOW PREVENTION DEVICE - DESIGN STANDARD

      The mop sink is missing backflow prevention devices. The sink should have an ASSE 1011 or ASSE 1052 along with a pressure bleed device (wasting tee) since the sink is connected to a ASSE 1055 chemical dispenser via a permanent hose connection.

      Correction: Provide a State of Wisconsin approved backflow prevention device. View ASSE summary on 1055 devices.

      Code 5-202.14

    • Serious Priority

      PLUMBING - BACKFLOW PREVENTION DEVICE - WHEN REQUIRED

      A beverage dispensing device (coffee) is plumbed into the water supply system and is not provided with a backflow prevention device.

      Correction: Provide backflow prevention device. Plumbing systems shall be provided with backflow prevention at each point of use in the food establishment.

      Code 5-203.14

  3. Mar 19, 2026 Pre-inspection · 2 priority
    • Serious Priority

      PLUMBING - BACKFLOW PREVENTION DEVICE - DESIGN STANDARD

      The mop sink is missing backflow prevention devices. The sink should have an ASSE 1011 or ASSE 1052 along with a pressure bleed device (wasting tee) since the sink is connected to a ASSE 1055 chemical dispenser via a permanent hose connection.

      Correction: Provide a State of Wisconsin approved backflow prevention device. View ASSE summary on 1055 devices.

      Code 5-202.14

    • Serious Priority

      PLUMBING - BACKFLOW PREVENTION DEVICE - WHEN REQUIRED

      A beverage dispensing device the is plumbed into the water supply system is not provided with a backflow prevention device.

      Correction: Provide backflow prevention device. Plumbing systems shall be provided with backflow prevention at each point of use in the food establishment.

      Code 5-203.14

Source: Washington Ozaukee Public Health. History last read Nov 20, 2026. Violation text is the inspector's wording. “Serious” is the source's own top tier. About this data.