Arby's
730 W PARADISE DR, West Bend, WI 53095 · Washington County
Establishment
- Type
- Restaurant (retail food serving meals) (Retail Food - Serving Meals)
- Inspected by
- Washington Ozaukee Public Health
- License / ID
- CBEG-CBMS35
- Status
- Permitted
- Official record
- Washington Ozaukee Public Health inspection reports
Year by year
| Year | Inspections | Violations | Serious |
|---|---|---|---|
| 2026 | 2 | 2 | 2 |
| 2025 | 1 | 3 | 1 |
| 2023 | 2 | 5 | 1 |
Inspections
-
May 12, 2026 Follow Up · No items found
No violations cited.
-
Apr 27, 2026 Routine · 2 priority, 1 repeat
-
Serious
Priority
Repeat
FOOD CONTACT SURFACES - CLEANING FREQUENCY
The facility roast beef slicer that is used with time/temperature controlled for safety food is not cleaned every 4 hours. The facility opens at 10am. When the inspection occured around 3:15 the slicer had not yet been cleaned.
Correction: Clean food contact surfaces used with time/temperature controlled for safety food a minimum of every 4 hours.
Code 4-602.11 (C)
-
Serious
Priority
FOOD CONTACT SURFACES - SANITIZED BEFORE USE AFTER CLEANING
Food contact counter surfaces were not sanitized after cleaning. The facility was using a chlorinated cleaner manufactured by Ecolab on surfaces. This product is only a cleaner and not a sanitizer.
Correction: Clean and sanitize surfaces before contact with food. The cleaner needs to be followed up with a sanitizer or consider using the Ecolab SaniSave product that is already in house. SaniSave is both a cleaner and sanitizer in one product and can be used on food contact surfaces.
Code 4-702.11
-
Serious
Priority
Repeat
-
Feb 5, 2025 Routine · 1 priority, 2 priority foundation, 1 repeat
-
Serious
Priority
Repeat
Corrected on site
FOOD CONTACT SURFACES - CLEANING FREQUENCY
The roast beef slicer on the assembly line used with time/temperature controlled for safety food is not cleaned every 4 hours. The facility opens at 10am and is supposed to clean the slicer and scales by 2pm. When the inspection stated at 2:45pm the 2pm cleaning had not yet occurred. When the cleaning finally did occur, it was close to 3:30pm.
Correction: Clean food contact surfaces such as the slicer that are used with time/temperature controlled for safety food a minimum of every 4 hours. Inspector noted that since 6pm (another 4 hours from 2pm) is likely a busy time, the inspector recommends creating a slicer cleaning schedule that keeps intervals under 4 hours but avoids rush periods. For example if the facility opens at 10am and closes at 12am
Code 4-602.11 (C)
-
Not serious
Priority Foundation
WAREWASHING - CHEMICAL SANITIZER CONCENTRATION - TEST KIT
No quat test kit is available for monitoring sanitizer concentration of the quat sanitizer or the quat based SaniSave cleaner sanitizer. A chlorine based test kit was available for checking the concentration of the Kay-5 Cleaner Sanitizer
Correction: Provide a quat test kit to allow accurate determination of the sanitization concentration.
Code 4-501.116
-
Not serious
Priority Foundation
WAREWASHING - CLEANING AGENTS
The when cleaning the slicer, the facility was just using the multi-quat sanitizer and was not using a cleaning agent. In discussions with the facility GM, the facility is supposed to use the Ecolab SaniSave cleaner sanitizer spray which contains a cleaning agent already mixed with the sanitizer for cleaning the slicer. In addition, when cleaning the ice cream machine, the facility is only using the quat sanitizer and no cleaning agent is being used. Based on inspector experience, the facility is likely supposed to use a solution of Kay-5 cleaner sanitizer which has a cleaning agent integrated into the product when cleaning the ice cream machine (however, check with your corporate SOP to confirm).
Correction: Use the proper chemicals for their assigned task. All cleaning of equipment needs to have a cleaning agent to remove soils. This can be a dedicated cleaning agent such as dish soap, or part of a cleaner sanitizer chemical where both the cleaning agent and sanitizer agent are combined into once solution from the manufacturer.
Code 4-501.17
-
Serious
Priority
Repeat
Corrected on site
-
Dec 14, 2023 Routine · 1 priority, 3 priority foundation
-
Serious
Priority
Corrected on site
FOOD CONTACT SURFACES - CLEANING FREQUENCY
Food contact surfaces on the assembly line used with time/temperature controlled for safety food are not cleaned every 4 hours. The facility opens at 10am and is supposed to clean the slicer and scales at 2pm. When the inspection stated at 2:15pm the 2pm cleaning had not yet occurred. When the cleaning finally did occur at the inspector's urging, it was close to 3pm.
Correction: Clean food contact surfaces used with time/temperature controlled for safety food a minimum of every 4 hours. To prevent this from occurring again, it is recommenced to set a timer for when the cleaning needs to occur or aim for cleaning every 3 hours so if it gets busy and staff fall behind, they still complete the cleaning in accordance with the food code. Since the slicer was cleaned during the
Code 4-602.11 (C)
-
Not serious
Priority Foundation
THERMOMETERS - AMBIENT AIR AND WATER - ACCURACY
Thermometer in left prep cooler measuring ambient air is not accurate to ± 3°F. The cooler is ~40F and the thermometer is reading 49F. In the right prep cooler the thermometer is reading 0F when the temperatire is about ~40F.
Correction: Calibrate or replace thermometers.
Code 4-203.12
-
Not serious
Priority Foundation
HANDWASHING SINKS, INSTALLATION - WATER TEMPERATURE
Hot water temperature at drive thru side handwashing sink is at 124°F and each user has no control over temperature. While the sink was under heavy use because the other hand sink is not functional, the plumbing in place should have safeguards in place not allowing for water over 110F to be dispensed.
Correction: Water temperature at a handwashing sink shall be at least 85°F and no more than 110°F.
Code 5-202.12 (A)
-
Not serious
Priority Foundation
HANDWASHING FACILITIES - LOCATION AND PLACEMENT
Handwashing sink in back prep room is not functional. Without this sink this area does not have a place to wash hands that is conveniently located for easy access to food employees.
Correction: Fix the handwashing sink to facilitate handwashing by food employees.
Code 5-204.11
-
Serious
Priority
Corrected on site
-
Jun 6, 2023 Routine · 1 priority foundation
-
Not serious
Priority Foundation
WAREWASHING - CHEMICAL SANITIZER CONCENTRATION - TEST KIT
No Quat test kit is available for monitoring sanitizer concentration.
Correction: Provide a test kit to allow accurate determination of the sanitization concentration.
Code 4-501.116
-
Not serious
Priority Foundation
Source: Washington Ozaukee Public Health. History last read Nov 20, 2026. Violation text is the inspector's wording. “Serious” is the source's own top tier. About this data.