El Taco Feliz Mexican Restaurant
12524 W HAMPTON AVE, Butler, WI 53007 · Waukesha County
Establishment
- Type
- Restaurant (retail food serving meals) (Retail Food - Serving Meals)
- Inspected by
- Waukesha County Environmental Health
- License / ID
- HDEH-AWEJTK
- Status
- Permitted
- Phone
- (262) 788-9349
- Official record
- Waukesha County Environmental Health inspection reports
Year by year
| Year | Inspections | Violations | Serious |
|---|---|---|---|
| 2026 | 2 | 24 | 7 |
| 2023 | 5 | 27 | 6 |
Inspections
-
Apr 27, 2026 Re-inspection · 1 priority, 1 priority foundation, 7 core, 7 repeat
-
Serious
Priority
Repeat
PLUMBING - BACKFLOW PREVENTION DEVICE - WHEN REQUIRED
Plumbing system for the ice machine is not provided with an air gap. An air break is present at time of the re-inspection. Plumber was on site yesterday and tried to provide an air gap. Owner is to raise the ice machine higher in hopes to provide an air gap or will have the plumber back out to provide one.
Correction: Provide air gap or backflow prevention device. Plumbing systems shall be provided with backflow prevention at each point of use in the food establishment.
Code 5-203.14
-
Not serious
Priority Foundation
Corrected on site
PROPER COOLING METHODS - CRITERIA
Improper cooling methods are observed for pans of rice in the walk-in cooler as the amount of rice that is cooling, exceeds 2 inches in product depth. Rice has been transferred onto baking sheet trays and placed into the walk-in cooler to continue cooling. Corrected.
Correction: Adjust methods or procedures to facilitate cooling as described in 3-501.15.
Code 3-501.15 (A)
-
Not serious
Core
Repeat
PERSONAL CLEANLINESS - HAIR RESTRAINTS
A few employee noted working in food preparation/cooking area without a hair restraint.
Correction: Provide employees working in food preparation and cooking areas with effective hair restraint (hat, hair net, beard restraint, etc.).
Code 2-402.11
-
Not serious
Core
Corrected on site
WIPING CLOTHS - USE LIMITATION - CLOTHS FOR WIPING COUNTERS STORED IN SANITIZER
Wiping cloth bucket near the side door is at 0 PPM bleach. Sanitizer bucket was re set-up to 100 PPM bleach. Corrected.
Correction: Cloths used for wiping counters and equipment shall be stored in a sanitizing solution in between uses.
Code 3-304.14 (B) (1)
-
Not serious
Core
Repeat
EQUIPMENT AND UTENSILS - NONFOOD CONTACT SURFACES - DESIGNED
Wood shelving present below Margarita machine in the bar area. Wood shelving cannot be used as it is not constructed of material that is smooth, easily cleanable, non-absorbent material. Wood can be coated with Polyurethane as it would provide a coating on the wood that would make it smooth, easily cleanable and non absorbent.
Correction: Provide equipment that is designed and constructed to be easily cleanable and free from unnecessary ledges, projections and crevices.
Code 4-202.16
-
Not serious
Core
Repeat
PLUMBING - SERVICE SINK
There is no service sink provided in food establishment. Contact a licensed plumber to install and to obtain any necessary permits with the Village of Butler prior to installing a mop sink.
Correction: Provide at least 1 service sink or curbed cleaning facility.
Code 5-203.13
-
Not serious
Core
Repeat
PLUMBING - SYSTEM MAINTAINED IN GOOD REPAIR
Left and middle basin of 3-basin sink: Water leak is present on the piping below these basins. Water is leaking on to the floor.
Correction: The plumbing system shall be maintained in good repair. Repair or replace defective or leaking plumbing.
Code 5-205.15 (B)
-
Not serious
Core
Repeat
SURFACE CHARACTERISTICS - INDOOR AREAS
-Missing baseboard present throughout the kitchen. 4-inch baseboard shall be provided where missing. -Wall along prep table (dish machine side) is scored and damaged.
Correction: Repair area or replace with approved materials. Walls, floors and ceilings shall be smooth, durable and easily cleanable. If located in areas subject to moisture they shall also be non-absorbent.
Code 6-101.11
-
Not serious
Core
Repeat
MOBILE FOOD ESTABLISHMENT - RETURN TO BASE EVERY 24 HOURS
Mobile food truck logs are not available for review at time of the inspection. Each mobile food truck shall keep a daily base log at the restaruant and log the date along with time in and time outs and what activites are being done at the restaurant. The service base logs for each truck shall be readily available.
Correction: Unless approved by the department, the mobile retail food establishment shall return to its base every 24 hours.
Code 9-104.11 (A)
-
Serious
Priority
Repeat
-
Apr 20, 2026 Routine · 6 priority, 1 priority foundation, 8 core, 1 repeat
-
Serious
Priority
Corrected on site
COOLING - 6-HOUR COOLING PARAMETER
Walk-in Cooler: Birria is at 45 F and the product was made on Saturday per the owner. The amount of food product in this tote exceeds 2-3" in product depth. Since the walk-in cooler is at 41 F or below today, it is likely that the Birria didn't cool properly from Saturday due to the product's depth. This Birria has been discarded in the garbage. Discussed with the owner about keeping food product depth to 2-3 " during the cooling process going forward. Corrected.
Correction: If safe, reheat food to 165°F and restart the cooling process or discard the food item. Food shall be cooled from 135°F to 70°F within 2 hours and from 70°F to 41°F within 4 hours for a total 6 hour cooling period.
Code 3-501.14 (A)
-
Serious
Priority
TCS FOOD - HOT HOLDING
Shredded chicken is hot holding in the range of 123-143 F in the steam table. Shredded chicken was re-heated on the flat top grill to 210 F. Corrected.
Correction: Maintain time/temperature control for safety food at or above 135°F. Discard unsafe food items.
Code 3-501.16 (A) (1)
-
Serious
Priority
TCS FOOD - COLD HOLDING
1-door True cooler: Pan of cooked pork is at 45-47 F. This was made on Saturday per the owner. This product has been discarded in the garbage.
Correction: Maintain cold time/temperature control for safety food at or below 41°F. Discard unsafe food items.
Code 3-501.16 (A) (2) AND (B)
-
Serious
Priority
Repeat
Corrected on site
FOOD CONTACT SURFACES - WAREWASHING EQUIPMENT, CHEMICAL, TEMPERATURE, pH, CONCENTRATION AND HARDNESS
Dish machine is sanitizing in the range of 0 to 200 PPM. The dish machine was in use at the beginning of the inspection. Dish machine was ran by the inspector and was at 0 PPM Chlorine (bleach). When the dish machine was primed, the concentration was at 200 PPM. When the inspector stopped priming the dish machine, the sanitizer concentration went back to 0 PPM. Owner contacted their dish repair contractor for service today. The dish machine was serviced while the inspector was on site. Dish machine sanitizer concentration was increased. After a few cycles were ran, the dish machine has been verified to be sanitizing at 100 PPM bleach. Corrected. All utensils and food equipment will have to be sent back through the dish machine as the dish machine wasn't sanitizing prior to service. Note: The 3-basin sink was set up for sanitizing for a bit until the machine had been serviced and repaired.
Correction: Provide training to employees on proper use and concentration of sanitizer or repair or adjust warewashing equipment to provide proper sanitizer concentration.
Code 4-501.114 (A) - (E)
-
Serious
Priority
PLUMBING - BACKFLOW PREVENTION DEVICE - WHEN REQUIRED
Plumbing system for the ice machine is not provided with an air gap.
Correction: Provide air gap or backflow prevention device. Plumbing systems shall be provided with backflow prevention at each point of use in the food establishment.
Code 5-203.14
-
Serious
Priority
TOXIC SUBSTANCES - SANITIZER CRITERIA
Sanitizer cloth buckets exceed 200 PPM bleach. Buckets were re-set up to 50 PPM and 100 PPM. Corrected.
Correction: Sanitizer shall meet the requirements under 40 CFR 180.940 or 40 CFR 180.2020.
Code 7-204.11
-
Not serious
Priority Foundation
Corrected on site
HANDWASHING SINKS, INSTALLATION - WATER TEMPERATURE
Hot water temperature at kitchen handwashing sink is not provided at the beginning of the inspection. It was determined that the flow valve for the hot water was turned off. Inspector turned the flow valve on and hot water is provided. Discussed with the owner about ensuring that this flow valve remains open and not closed in order to provide readily available hot water. Corrected.
Correction: Water temperature at a handwashing sink shall be at least 85°F and no more than 110°F.
Code 5-202.12 (A)
-
Not serious
Core
PERSONAL CLEANLINESS - HAIR RESTRAINTS
A few employee noted working in food preparation/cooking area without a hair restraint.
Correction: Provide employees working in food preparation and cooking areas with effective hair restraint (hat, hair net, beard restraint, etc.).
Code 2-402.11
-
Not serious
Core
LABELING - FOOD STORAGE CONTAINERS LABELED WITH COMMON NAME
Several seasinings are being stored in an unlabeled container.
Correction: Store all foods that are removed from their original packages in containers labeled with the common name of the food or ingredient.
Code 3-302.12
-
Not serious
Core
EQUIPMENT AND UTENSILS - NONFOOD CONTACT SURFACES - DESIGNED
Wood shelving present below Margarita machine in the bar area. Wood shelving cannot be used as it is not constructed of material that is smooth, easily cleanable, non-absorbent material. Wood can be coated with Polyurethane as it would provide a coating on the wood that would make it smooth, easily cleanable and non absorbent.
Correction: Provide equipment that is designed and constructed to be easily cleanable and free from unnecessary ledges, projections and crevices.
Code 4-202.16
-
Not serious
Core
PLUMBING - SERVICE SINK
There is no service sink provided in food establishment. Contact a licensed plumber to install and to obtain any necessary permits with the Village of Butler prior to installing a mop sink.
Correction: Provide at least 1 service sink or curbed cleaning facility.
Code 5-203.13
-
Not serious
Core
PLUMBING - SYSTEM MAINTAINED IN GOOD REPAIR
Left and middle basin of 3-basin sink: Water leak is present on the piping below these basins. Water is leaking on to the floor.
Correction: The plumbing system shall be maintained in good repair. Repair or replace defective or leaking plumbing.
Code 5-205.15 (B)
-
Not serious
Core
SURFACE CHARACTERISTICS - INDOOR AREAS
-Missing baseboard present throughout the kitchen. 4-inch baseboard shall be provided where missing. -Wall along prep table (dish machine side) is scored and damaged.
Correction: Repair area or replace with approved materials. Walls, floors and ceilings shall be smooth, durable and easily cleanable. If located in areas subject to moisture they shall also be non-absorbent.
Code 6-101.11
-
Not serious
Core
INSECT CONTROL DEVICES, DESIGN AND INSTALLATION - IMPROPERLY LOCATED
Fly strip observed to be hanging over the prep table (to the left of the 1-door True cooler). Fly strip has been removed and discarded. Corrected.
Correction: Remove or relocate this device so that it is not over any food prep area.
Code 6-202.13 (B) (1)
-
Not serious
Core
MOBILE FOOD ESTABLISHMENT - RETURN TO BASE EVERY 24 HOURS
Mobile food truck logs are not available for review at time of the inspection. Each mobile food truck shall keep a daily base log at the restaruant and log the date along with time in and time outs and what activites are being done at the restaurant. The service base logs for each truck shall be readily available.
Correction: Unless approved by the department, the mobile retail food establishment shall return to its base every 24 hours.
Code 9-104.11 (A)
-
Serious
Priority
Corrected on site
-
Dec 14, 2023 Re-inspection · 2 core, 2 repeat
-
Not serious
Core
Repeat
SURFACE CHARACTERISTICS - INDOOR AREAS
Floor below the dish machine is not in good condition as several floor tiles are cracked and/or pieces are missing.
Correction: Repair area or replace with approved materials. Walls, floors and ceilings shall be smooth, durable and easily cleanable. If located in areas subject to moisture they shall also be non-absorbent.
Code 6-101.11
-
Not serious
Core
Repeat
HANDWASHING SIGNAGE
No handwashing signage provided at the wait station/bar handwashing sink.
Correction: Provide handwashing signage at all handwashing sinks used by food employees.
Code 6-301.14
-
Not serious
Core
Repeat
-
Nov 13, 2023 Re-inspection · 1 priority, 1 priority foundation, 2 core, 4 repeat
-
Serious
Priority
Repeat
TCS FOOD - COLD HOLDING
Air temperature in the walk-in cooler was observed to be in the range of 38-43 F during today's re-inspection. The thermostat on the unit was turned to a colder setting. Cold holding for time/temperature control for safety food shall be at 41 F or below.
Correction: Maintain cold time/temperature control for safety food at or below 41°F. Discard unsafe food items.
Code 3-501.16 (A) (2) AND (B)
-
Not serious
Priority Foundation
Repeat
RTE/TCS FOOD - PROPER DATE MARKING
Numerous cooked, time/temperature control for safety foods are not date marked. Food shall be date marked, even when placed into the freezers, and removed from the freezers and placed into refrigeration.
Correction: Adjust method or procedures so that all ready-to-eat time/temperature control for safety food, if required, are provided with date marking or an effective method of identifying when a food item has exceeded 7 days. Discard improperly date marked food or food that has past the 7 day shelf life.
Code 3-501.17 (A)
-
Not serious
Core
Repeat
SURFACE CHARACTERISTICS - INDOOR AREAS
Floor below the dish machine is not in good condition as several floor tiles are cracked and/or pieces are missing.
Correction: Repair area or replace with approved materials. Walls, floors and ceilings shall be smooth, durable and easily cleanable. If located in areas subject to moisture they shall also be non-absorbent.
Code 6-101.11
-
Not serious
Core
Repeat
HANDWASHING SIGNAGE
No handwashing signage provided at the wait station/bar handwashing sink.
Correction: Provide handwashing signage at all handwashing sinks used by food employees.
Code 6-301.14
-
Serious
Priority
Repeat
-
Nov 6, 2023 Re-inspection 2 · 1 priority, 2 priority foundation, 2 core, 4 repeat
-
Serious
Priority
TCS FOOD - COLD HOLDING
Air temperature in the walk-in cooler was at 46-47 F, then dropped to 43 F after the thermostat on the unit was turned to a colder setting. Owner believes that the refrigeration company placed too much freon in this unit recently and stated that this unit will be re-serviced.
Correction: Maintain cold time/temperature control for safety food at or below 41°F. Discard unsafe food items.
Code 3-501.16 (A) (2) AND (B)
-
Not serious
Priority Foundation
Repeat
Corrected on site
PROPER COOLING METHODS - CRITERIA
-Refried beans in a 5-gallon bucket (approximately half full) is at 88 F at 2:45 PM today. Refreid beans were cooked at 11 AM today. No cool-down logs present. Refried beans were portioned into shallower containers and placed in an ice bath. -Pinto beans are at 81 F and are in a pan that is at 4 inches or less. Pinto beans were placed in an ice bath. -Cooked rice in the walk-in cooler is at 72-74 F. Rice was cooked at 11 AM today per owner. Rice exceeded four inches in depth. Rice has been placed into shallower containers. -Walk-in cooler: Container of cooked rice, refried beans and pinto beans are at 46-47 F. Items were cooked yesterday per the owner. The products were in containers that were less than 4 inches in depth, but noted that there was Seran wrap over them and might not have cooled completley from yesterday. These items were discarded in the garbage.
Correction: Adjust methods or procedures to facilitate cooling as described in 3-501.15.
Code 3-501.15 (A)
-
Not serious
Priority Foundation
Repeat
RTE/TCS FOOD - PROPER DATE MARKING
Numerous cooked, time/temperature control for safety foods are not date marked. Food shall be date marked, even when placed into the freezers, and removed from the freezers and placed into refrigeration.
Correction: Adjust method or procedures so that all ready-to-eat time/temperature control for safety food, if required, are provided with date marking or an effective method of identifying when a food item has exceeded 7 days. Discard improperly date marked food or food that has past the 7 day shelf life.
Code 3-501.17 (A)
-
Not serious
Core
Repeat
SURFACE CHARACTERISTICS - INDOOR AREAS
Floor below the dish machine is not in good condition as several floor tiles are cracked and/or pieces are missing.
Correction: Repair area or replace with approved materials. Walls, floors and ceilings shall be smooth, durable and easily cleanable. If located in areas subject to moisture they shall also be non-absorbent.
Code 6-101.11
-
Not serious
Core
Repeat
HANDWASHING SIGNAGE
-No handwashing signage provided at the wait station/bar handwashing sink. -No hand washing sign present at the kitchen hand washing sink.
Correction: Provide handwashing signage at all handwashing sinks used by food employees.
Code 6-301.14
-
Serious
Priority
-
Oct 30, 2023 Re-inspection · 1 priority, 2 priority foundation, 2 core, 5 repeat
-
Serious
Priority
Repeat
TCS FOOD - COLD HOLDING
-Whole cooked beef chunks are at 44 F in the walk-in cooler. Beef was made yesterday per owner. -Shredded beef in the walk-in cooler is at 44-45 F. Beef was made yesterday.
Correction: Maintain cold time/temperature control for safety food at or below 41°F. Discard unsafe food items.
Code 3-501.16 (A) (2) AND (B)
-
Not serious
Priority Foundation
Repeat
Corrected on site
PROPER COOLING METHODS - CRITERIA
Improper cooling methods are observed for numerous time/temperature control for safety foods such as but not limited to cooked rice, pinto beans and cheese sauce as these items are cooling down in containers on wire shelf (near the walk-in cooler) that exceed 3-inches in depth. These foods are at 72-78 F and were made three hours ago per the owner. These items were moved into the walk-in cooler an or freezer and placed into shallower pans. Discussed with the PIC about limiting food to 3 inches or less and to use ice water baths and/or ice wands to help rapidly cool food from 135 F to 70 F in 2 hours and from 70 F to 41 F or below in 4 hours. Owner to purchase additional shallower pans to help with cool downs. -Kernel corn in the walk-in cooler is at 80 F. Kernal corn is cooling down. Kernel corn was covered with Seran wrap and product exceeded 3 inches deep. Seran Wrap was removed from the corn.
Correction: Adjust methods or procedures to facilitate cooling as described in 3-501.15.
Code 3-501.15 (A)
-
Not serious
Priority Foundation
Repeat
RTE/TCS FOOD - PROPER DATE MARKING
Numerous cooked, time/temperature control for safety foods are not date marked. Food shall be date marked, even when placed into the freezers, and removed from the freezers and placed into refrigeration.
Correction: Adjust method or procedures so that all ready-to-eat time/temperature control for safety food, if required, are provided with date marking or an effective method of identifying when a food item has exceeded 7 days. Discard improperly date marked food or food that has past the 7 day shelf life.
Code 3-501.17 (A)
-
Not serious
Core
Repeat
SURFACE CHARACTERISTICS - INDOOR AREAS
Floor below the dish machine is not in good condition as several floor tiles are cracked and/or pieces are missing.
Correction: Repair area or replace with approved materials. Walls, floors and ceilings shall be smooth, durable and easily cleanable. If located in areas subject to moisture they shall also be non-absorbent.
Code 6-101.11
-
Not serious
Core
Repeat
HANDWASHING SIGNAGE
-No handwashing signage provided at the wait station/bar handwashing sink. -No hand washing sign present at the kitchen hand washing sink.
Correction: Provide handwashing signage at all handwashing sinks used by food employees.
Code 6-301.14
-
Serious
Priority
Repeat
-
Oct 23, 2023 Routine · 3 priority, 4 priority foundation, 4 core, 1 repeat
-
Serious
Priority
HANDWASHING PROCEDURE
Employee observed not drying thier hands after handwashing and then place on gloves.
Correction: Train food employees in proper handwashing techniques.
Code 2-301.12 (B)
-
Serious
Priority
TCS FOOD - COLD HOLDING
-Walk-in Cooler: 46-47 F cooked beef. Made 3 days ago per PIC. Beef was discarded in the garbage. -Kernel Corn in the walk-in cooler is at 44 F.
Correction: Maintain cold time/temperature control for safety food at or below 41°F. Discard unsafe food items.
Code 3-501.16 (A) (2) AND (B)
-
Serious
Priority
Corrected on site
FOOD CONTACT SURFACES - WAREWASHING EQUIPMENT, CHEMICAL, TEMPERATURE, pH, CONCENTRATION AND HARDNESS
The Chlorine (bleach) is not being used according to EPA registered label use instructions at the dish machine and is at 0 PPM. Some of the chemical tubing was cut off and then was re-attached to the sanitizer dispenser control system. Dish machine was verified to be sanitizing in the range of 50-100 PPM Chlorine. Corrected.
Correction: Provide training to employees on proper use and concentration of sanitizer or repair or adjust warewashing equipment to provide proper sanitizer concentration.
Code 4-501.114 (A) - (E)
-
Not serious
Priority Foundation
WHERE TO WASH
-Employee observed washing hands at the three compartment sink, which is unapproved sink for hand washing. -Employee observed wiping down the front of the deep fryer with gloves on, and then handle a basket of chips without taking the gloves off and washing thier hands in between tasks.
Correction: Employees shall wash their hands in a designated handwash sink. Handwashing is prohibited in food preparation, warewashing and mop sinks.
Code 2-301.15
-
Not serious
Priority Foundation
Corrected on site
PROPER COOLING METHODS - CRITERIA
Improper cooling methods are observed for numerous time/temperature control for safety foods such as but not limited to cooked rice, refried beans, pork, etc. as these items are cooling down in containers that exceed 3-inches in depth. Discussed with the PIC about limiting food to 3 inches or less and to use ice water baths and/or ice wands to help rapidly cool food from 135 F to 70 F in 2 hours and from 70 F to 41 F or below in 4 hours. Foods that were being cooled at time of inspection were cooked at 10 AM per PIC and have been sitting out at room temperature before the food is portioned and placed into zip lock bags.
Correction: Adjust methods or procedures to facilitate cooling as described in 3-501.15.
Code 3-501.15 (A)
-
Not serious
Priority Foundation
RTE/TCS FOOD - PROPER DATE MARKING
Numerous cooked, time/temperature control for safety foods are not date marked. Food shall be date marked, even when placed into the freezers, and removed from the freezers and placed into refrigeration.
Correction: Adjust method or procedures so that all ready-to-eat time/temperature control for safety food, if required, are provided with date marking or an effective method of identifying when a food item has exceeded 7 days. Discard improperly date marked food or food that has past the 7 day shelf life.
Code 3-501.17 (A)
-
Not serious
Priority Foundation
Repeat
Corrected on site
USING A HANDWASHING SINK - ACCESSIBLE AND MAINTAINED
-Waitstation/Bar hand washing sink was blocked with a mop and mop bucket. Mop and mop bucket were removed upon request. Corrected. -Kitchen hand wash sink was blocked with a garbage can and a flat top grill scraper was sitting in the hand wash sink. Both items were moved away from the hand wash sink. Corrected.
Correction: Keep handwashing sink in working condition at all times to allow for frequent handwashing.
Code 5-205.11 (A) and (C)
-
Not serious
Core
Corrected on site
IN-USE UTENSILS, BETWEEN USE STORAGE
Ice scoop sits ontop of the ice machine. Ice scoop was taken to the dish machine to be washed, rinsed and sanitized. Discussed with the PIC about storing the ice scoop in the ice, but with the handle pointed towards the user. Corrected.
Correction: Store in-use utensils in the food item with handle extended, on a clean surface, running dipper well or in a container of water greater than 135°F.
Code 3-304.12
-
Not serious
Core
Corrected on site
WIPING CLOTHS - USE LIMITATION - CLOTHS FOR WIPING COUNTERS STORED IN SANITIZER
Two wiping cloth buckets in the kitchen (with wiping cloths in them) used for wiping surfaces exceed 200 PPM. Both containers were corrected to 50 PPM bleach. Corrected.
Correction: Cloths used for wiping counters and equipment shall be stored in a sanitizing solution in between uses.
Code 3-304.14 (B) (1)
-
Not serious
Core
SURFACE CHARACTERISTICS - INDOOR AREAS
Floor below the dish machine is not in good condition as several floor tiles are cracked and/or pieces are missing.
Correction: Repair area or replace with approved materials. Walls, floors and ceilings shall be smooth, durable and easily cleanable. If located in areas subject to moisture they shall also be non-absorbent.
Code 6-101.11
-
Not serious
Core
HANDWASHING SIGNAGE
-No handwashing signage provided at the wait station/bar handwashing sink. -No hand washing sign present at the kitchen hand washing sink.
Correction: Provide handwashing signage at all handwashing sinks used by food employees.
Code 6-301.14
-
Serious
Priority
Source: Waukesha County Environmental Health. History last read Nov 21, 2026. Violation text is the inspector's wording. “Serious” is the source's own top tier. About this data.