Bryant Lake Bowl
810 LAKE ST W, Minneapolis, MN 55408 · Hennepin County
Establishment
- Type
- Restaurant (retail food serving meals) (Restaurant)
- Inspected by
- Minneapolis Health Department
- License / ID
- LIC373185
- Status
- Risk level 1
- Official record
- Minneapolis Health Department inspection reports
Year by year
| Year | Inspections | Violations | Serious |
|---|---|---|---|
| 2026 | 2 | 10 | 3 |
| 2025 | 2 | 7 | 3 |
| 2024 | 1 | 6 | 1 |
| 2023 | 1 | 2 | 1 |
Inspections
-
Apr 29, 2026 Follow-Up Score 100
-
Not serious
Priority 3
Keep the physical facilities in good repair.
Flooring in the keg cooler is coming up off the subfloor, exposing the concrete in many areas. Repair or replace flooring with an approved covering. Consult inspector as needed.
Code MN Rule 4626.1515
-
Not serious
Priority 3
-
Apr 23, 2026 Routine Score 84
-
Serious
Priority 1
Keep all cold TCS foods at 41 degrees F or colder under mechanical refrigeration.
Multiple examples of TCS foods, such as cooked rice, were ineffectively held in the countertop cold holding unit near the 6-burner. Reviewed some equipment troubleshooting tactics with the person in charge during the inspection. Ensure all cold TCS foods are holding at or below 41 degrees F. More than a small working portion of shelled eggs is being held at room temperature in the kitchen. Cook indicated that they only need to replace this container once or twice a day. Either reduce the portion size to a small working portion or control this practice by installing time as a public health control practice, such as masking tape or a log, to ensure that these foods never exceed 4 hours of temperature abuse.
Code MN Rule 4626.0395A2
-
Not serious
Priority 3
Clean surfaces contacting non-TCS foods: • When surfaces may have been contaminated • At least once every 24 hours for consumer self-service utensils • Before restocking consumer self-service equipment and utensils • As often as needed to keep surfaces clean
The beverage gun nozzle holder behind the bar was soiled with a buildup of debris. Clean and maintain this piece of equipment regularly to prevent buildup and contamination.
Code MN Rule 4626.0845E
-
Not serious
Priority 3
Post a sign at all handwashing sinks used by employees to remind them to wash their hands.
Handwashing reminder signage in the bathroom is broken, yielding the reminder message incomplete. Provide a complete handwashing reminder signage near all hand sinks.
Code MN Rule 4626.1457
-
Not serious
Priority 2
Keep handwashing sinks accessible at all times. Make sure they are only used for handwashing.
Cut potatoes in water storing in front of the hand sink on the line near the floor level. This setup makes it more challenging to access the hand sink and puts the potatoes at risk of contamination. Relocate these potatoes to an area that doesn't imped access to the hand sink and prevents the contamination of the potatoes.
Code MN Rule 4626.1110AB
-
Not serious
Priority 2
Have a test kit for the type of sanitizer used.
Spray bottle of bleach sanitizer used for sanitizing cutting boards, however, no test kit for bleach was available on site. Procure and maintain a test kit for all sanitizers in use.
Code MN Rule 4626.0715
-
Serious
Priority 1
Use only chemical sanitizers on food-contact surfaces that meet Title 40, Code of Federal Regulations requirements: • Part 180, section 180.940 • Part 180, subpart E, section 180.2020
Concentration of bleach solution in the spray bottle was measured above the maximum allowable limit. Maintain the concentration of chlorine solution between 50-200ppm.
Code MN Rule 4626.1620
-
Not serious
Priority 3
Corrected on site
Store in-use food preparation and serving utensils only on clean, sanitized surfaces.
In-use tongs storing over the splash guard of the hand sink exposing them to contamination from the hand sink. Tongs were moved during the inspection to a dry and clean area. Ensure that in-use utensils are store in a manner that prevents contamination.
Code MN Rule 4626.0275C
-
Serious
Priority 1
Corrected on site
Reheat previously cooked refrigerated TCS foods in the microwave to an internal temperature of 165 degrees F (74 degrees C) and let stand covered for two minutes after heating.
Previously cooked beans were ineffectively reheating inside the countertop hot holding unit between 70-85 degrees F. Beans were moved to the stove and rapidly reheated during the inspection. Ensure that all previously cooked TCS foods are rapidly reheated before moving to hot holding equipment.
Code MN Rule 4626.0360B
-
Not serious
Priority 3
Keep the physical facilities in good repair.
Flooring in the keg cooler is coming up off of the subfloor exposing the concrete in many areas. Repair or replace flooring with an approved covering. Consult inspector as needed.
Code MN Rule 4626.1515
-
Serious
Priority 1
-
Apr 17, 2025 VerRec Score 100
Result: Complete.
-
Apr 10, 2025 Routine Score 88
-
Serious
Priority 1
Keep all cold TCS foods at 41 degrees F or colder under mechanical refrigeration.
Mozzarella sets in the lower reach-in cooler on the cook line were holding at 55 degrees F. Stock times verified and refrigeration troubleshooting tactics were reviewed. Ensure that all cold TCS foods are holding at or below 41 degrees F.
Code MN Rule 4626.0395A2
-
Serious
Priority 1
Have an approved quaternary ammonium sanitizing solution: • Within the concentration specified in 21CFR.178.1010, and • According to the manufacturer/'s directions
Triple sink dispenser of quat dispensing at 100 ppm. Service call placed during the inspection. Ensure that this product is maintained between 150-400 ppm.
Code MN Rule 4626.0805C3
-
Serious
Priority 1
For mechanical dishwashing machines using hot water sanitizing, the surface temperature of the utensils and equipment must reach 160 degrees F or higher.
Bar dishwasher was measured during 5 runs at a maximum of 153 degrees F. Service call was placed during the inspection. Ensure that the plate temperature is reaching at least 160 degrees F during the cycle.
Code MN Rule 4626.0905B
-
Not serious
Priority 3
Clean surfaces contacting non-TCS foods: • When surfaces may have been contaminated • At least once every 24 hours for consumer self-service utensils • Before restocking consumer self-service equipment and utensils • As often as needed to keep surfaces clean
Beverage gun nozzle holder behind the bar was soiled with build up of debris. Clean and maintain clean. Ice machine baffle soiled with mold like accumulations. Clean and maintain clean.
Code MN Rule 4626.0845E
-
Not serious
Priority 3
Non-food contact surfaces of equipment must be made of materials which are corrosion-resistant, non-absorbent, and smooth. Remove equipment with non-food contact surfaces made of other materials.
Multiple spatula handles are burned resulting in uncleanable surfaces. One wooden spoon handle with dings and bents was discarded during the inspection. Ensure that all small wares are in cleanable condition.
Code MN Rule 4626.0495
-
Not serious
Priority 3
Label all containers of food and food ingredients with their common name.
Multiple bottles of liquids, sauces and oils present in the cooking area without labeling. Labeling solutions reviewed during the inspection. Label these foods.
Code MN Rule 4626.0240
-
Not serious
Priority 3
Post a sign at all handwashing sinks used by employees to remind them to wash their hands.
No handwashing reminder signage near the bathroom hand sink. Ensure that all hand sinks have reminder signage near them.
Code MN Rule 4626.1457
-
Serious
Priority 1
-
Apr 11, 2024 Routine Score 94
-
Serious
Priority 1
Keep all cold TCS foods at 41 degrees F or colder under mechanical refrigeration.
Multiple TCS foods near the cooking area on the line were holding between 42-46 degrees F such as liquid eggs and tofu. Multiple TCS foods in the beer cooling were holding at 50 degrees F such as milk. Ensure that all cold TCS foods are holding at or below 41 degrees F.
Code MN Rule 4626.0395A2
-
Not serious
Priority 3
Keep the physical facilities in good repair.
Flooring the beer cooler is in disrepair with multiple chipped tiles and eroded grout lines. Repair or refinish flooring back to a smooth and easily cleanable surface.
Code MN Rule 4626.1515
-
Not serious
Priority 3
Clean all physical facilities (floors, walls, ceilings). Keep them clean.
Flooring under the equipment in the bar is soiled with debris and build-up which is likely contributing to the fruit fly presence. Clean and maintain clean all flooring throughout the facility.
Code MN Rule 4626.1520A
-
Not serious
Priority 3
All equipment and components must be in good repair. Keep them maintained to manufacturer's specifications.
Multiple examples of metro shelving in coolers that are showing signs of rust. Replace rusted shelving or refinish back to manufacturer's finish. Small cooler door handle behind the bar is being held together by duct tape. Repair or replace handle.
Code MN Rule 4626.0735AB
-
Not serious
Priority 3
Wiping cloths used for wiping surfaces must: • Be held in an approved sanitizing solution • Laundered daily
Quat concentration within the sani buckets measured below 150 ppm. Change out sani buckets more frequently and/or slightly increase the concentration at the dispenser to ensure that the concentration of quat is maintained between 150-400 ppm when in use.
Code MN Rule 4626.0285B
-
Not serious
Priority 2
Use approved trapping devices or other means of pest control when pests are found.
Presence of fruit flies at the bar area, especially near the taps. Work with your pest control provider and enhance sanitation practices in this area to reduce the presence of fruit flies.
Code MN Rule 4626.1565C
-
Serious
Priority 1
-
Apr 13, 2023 Routine Score 96
-
Not serious
Priority 3
Floors, walls and/or ceiling surfaces are missing. Install smooth, durable, and easily cleanable floor, wall and ceiling surfaces.
Basement storage area in front of the beer walk-in cooler still does not have approved, finished walls, floors, and ceilings. Informed MOD to either discontinue storing food equipment and items in this area or install approved walls, floors, and ceilings ASAP
Code MN Rule 4626.1325A1
-
Serious
Priority 1
Keep all cold TCS foods at 41 degrees F or colder under mechanical refrigeration.
Temps of noodles (64*F) and artichoke dipping sauce (68*F) in the over-counter cold unit next to the cookline was above 41*F. Informed MOD and cook to relocate TCS foods in this unit to another working cooler, and to relocate the cold unit itself away from the heat source (range) or create a physical barrier between the range and the cold unit.
Code MN Rule 4626.0395A2
-
Not serious
Priority 3
Source: Minneapolis Health Department. History last read Nov 21, 2026. Violation text is the inspector's wording. “Serious” is the source's own top tier. About this data.