december-4-2023-agenda-packet
City of Walhalla · Oconee County · meeting of Dec 1, 2023 · Agenda packets
Open the original document More from City of Walhalla
Text
Extracted automatically from the original. Tables and formatting may not survive; the original document is authoritative.
City of Walhalla
Board of Zoning Appeals
f
Teara Barnwell, Chair Frank Guldner, Vice-Chair
Dustin Raines Amy Welch
City of Walhalla • Community Development Department
206 N Church St. • P.O. Box 1099 • Walhalla, SC 29691 • (864) 638-4343 • Fax (864) 638-4357 • www.CityofWalhalla.com
Monday, December 4, 2023
Special Board of Zoning Appeals Meeting
5:30 PM
206 North Church Street
Walhalla, South Carolina 29691
AGENDA
1. Call to Order
2. Approval of Agenda
3. Approval of Minutes – October 16, 2023
4. Introduction of New Planner
5. Date of January Meeting
6. Public Hearings
a. Variance: Request for variance from minimum setbacks on East Main Street (TMS
500-16-12-002)
b. Variance: Request for variance from minimum setbacks on East Main Street (TMS
500-16-09-004)
7. Old Business
8. Public Comments, non-agenda items
9. Other Business
10. Adjournment
City of Walhalla Board of Zoning Appeals
Thursday, October 16, 2023 • 5:00 PM
Council Chambers • City Hall
Walhalla, South Carolina
Minutes
In accordance with the South Carolina Freedom of Information Act, Section 30-4-10 et seq., South Carolina Code,
1976, the media was duly notified of the date, time, and place of the meeting.
Members Present: Teara Barnwell, Frank Guldner, Dustin Raines and Amy Welch
Members Absent: Kenny Johns
Staff Present: Celia Myers
Call to Order: Chairwoman Barnwell called the meeting to order at 5:00PM, with a quorum present to
conduct the meeting and welcomed all present to the meeting.
Approval of Agenda: Mr. Guldner moved to approve the agenda with Mr. Raines seconding. The
motion to approve the agenda was unanimous.
Approval of Minutes: Ms. Welch moved to approve the minutes of the October 24, 2023 meeting;
and Mr. Guldner seconded. The vote was unanimous.
Public Hearing:
Variance: Request for variance from minimum width at setback line on N Church Street (TMS 500-07-03-
041)
Mrs. Celia Myers presented the request for a variance from minimum width at setback line. The owner
wishes to subdivide the property into three lots, utilizing a shared driveway. To do so, minimum lot
width cannot be met. The applicant claims a hardship due to the triangular shape of the lot an d that it
prevents his subdividing into three lots. Staff does not believe the request meets the definition of a
hardship, as the use of the property is not prohibited. Hardship cannot include financial aspects. The
parcel is zoned R-25 and one or two lots can be utilized meeting current standards. Chairwoman
Barnwell recused herself as she is representing the neighboring home in a sale. Vice Chair Guldner
opened the public hearing. The applicant’s representative Ms. Glory Hotko approached and stated
that SCDOT approved the shared drive and that all other standards would be met. Hearing no other
comments, the hearing was closed. Mr. Raines moved to approve the variance as requested. Ms.
Welch seconded and the motion to approve was passed 3-0 with Mrs. Barnwell recusing herself.
Variance: Request for variance from maximum size of sign within the Downtown Design Guidelines
Mrs. Myers presented the request to vary from the sign regulations to allow a larger than 36 sq ft sign
and internal illumination for the gas station on Main Street. The current station Exxon is changing to
Texaco and the new company wishes to rebrand. Staff recommended approval to allow the price
section of the sign be illuminated. The unique circumstances are that other businesses are not
expected to post their prices outside their business. Other requests including the internally illuminated
canopy and enlarged sign were not recommended for approval. Chairwo man Barnwell opened the
public hearing. A Texaco represented approached and stated that if the size variance was not
approved, he would need to have special approval from corporate, as the provided signage was their
minimum design. Hearing no other comments, the hearing was closed. Ms. Welch moved to approve
the internal illumination for the pricing/numbers only and denying of the illuminated canopy and size
variance. Mr. Guldner seconded. The motion passed unanimously. Mrs. Myers reminded that Board
and audience that City Council will have to hear and grant approval of the sign, as it is a freestanding
sign within the Downtown Design Overlay and Code requires their approval. The request will be heard
the following night.
Old Business: None was presented.
Public Comments, non-agenda items: None were presented.
Other Business: Chairwoman Barnwell called for any other business. None was presented.
Hearing no further business, Chairwoman Barnwell adjourned the meeting at 5:21 pm.
Respectfully Submitted,
Celia Boyd Myers, AICP
Photographs
Applicant: Barry Culbertson
Location: Corner of East Main Street and North Johnson Street
11/21/23, 9:26 AM City of Walhalla, SC HC Highway Commercial District.
https://ecode360.com/print/WA4233?guid=37535796 1/3
A.
(1)
(2)
B.
(1)
(2)
(3)
(4)
(5)
(6)
(a)
(b)
(c)
(d)
(7)
(8)
City of Walhalla, SC
Tuesday, November 21, 2023
Chapter 330. Zoning and Subdivision
Part 1. Zoning
Article IV. Requirements by District
§ 330-1.20. HC Highway Commercial District.
Purpose.
It is the intent of this section that the HC Zoning District be developed and reserved for general
business purposes and compatible residential activities, with particular consideration for the
automobile-oriented commercial development existing or proposed along arterial streets. The
regulations which apply within this district are designed to encourage the formation and
continuation of compatible and economic uses which benefit from being located in close
proximity to each other; and to discourage any encroachment by industrial or other uses
considered capable of adversely affecting the basic mixed-use character of the district.
If a property contained within the HC District is also included in the Downtown Development
Overlay District, the requirements of § 330-1.10A of this Part 1 will also apply to said property.
See § 330-1.25 for sign standards for properties within the overlay district.
Permitted uses. The following uses shall be permitted in any HC Zoning District:
Any retail or wholesale business involving the sale or rental of merchandise on the premises,
as set forth for the OC Zoning District, § 330-1.19B(1).
Business involving the rendering of personal service as set forth for the OC Zoning District,
§ 330-1.19B(2).
Residential activities as described in the MFR Zoning District.
Off-street commercial parking lot or public garage.
Hotel, tourist home, boardinghouse, rooming house, bed-and-breakfast or motel.
Commercial recreation facility, specifically including, but not limited to:
Billiard parlor, pool parlor and game room.
Theater.
Bowling alley.
Golf course (including driving range or par-three operation); including such activities
customarily considered to be auxiliary to a golf course.
Eating or drinking establishment including drive-in or curb service.
Horticultural activities, or plant nursery and sales.
11/21/23, 9:26 AM City of Walhalla, SC HC Highway Commercial District.
https://ecode360.com/print/WA4233?guid=37535796 2/3
(9)
(a)
(10)
C.
(1)
(2)
(3)
(4)
(5)
(6)
D.
(1)
(2)
(3)
E.
(1)
(a)
(b)
Automobile sales, new or used, as provided by one of the following:
Parking and service areas are separated from adjoining residential properties by a suitable
screen, fence with no more than 20% voids or wall at least six feet in height above finished
grade.
Any commercial establishment selling or serving alcoholic beverages, whether consumed on
the premises or not.
Conditional uses. The following uses are set forth for the HC Zoning Districts and subject to the
conditions:
Automobile laundry or car wash, provided an off-street paved parking area is provided and no
standing water, safety hazard or impediment to traffic movement is created by the operation of
such an establishment, and provided there is no open storage of wrecked vehicles, dismantled
parts or parts visible beyond the premises.
Animal hospital or boarding facility, provided all boarding arrangements are maintained within a
building, except for exercise facilities.
Meat, fish or poultry shop, provided that no slaughtering is permitted. Any cleaning of fish or
poultry necessary for such use may be permitted, provided that cleaning activities are within
the main building on the premises, and waste is removed daily.
Open yard uses for the sale, rental or storage of materials or equipment, excluding junk or
other salvage, provided that such uses are separated from adjoining residential properties by a
suitable planted screen, and fence or wall at least six feet in height above finished grade.
All conditional uses set forth in the OC Zoning District.
Major retailers, provided they adhere to the following conditions: They must comply with the
Downtown Design Guidelines.
[Added 9-21-2021 by Ord. No. 2021-17]
Special exception uses. Certain uses within any HC Zoning District are to be special exception
uses pursuant to the requirements and procedures of § 330-1.47 and all subsections and all
conditions stipulated herein:
Gasoline filling stations. In addition to all conditions of the special exception use permit, at a
minimum all pumps must be set back at least 25 feet from the right-of-way line of all abutting
streets. No junk or salvage vehicles shall be stored on site.
Automobile service station (not gasoline stations) involving major repairs, body and fender
work, painting or the sale or rental of new or used cars, trucks, trailers of any type or boats. No
junk or salvage vehicles shall be stored on site. All provisions of § 330-1.49, Performance
standards, must be met.
Communication towers.
Other requirements. Unless otherwise specified elsewhere in this Part 1, uses permitted in HC
Zoning Districts shall be required to conform to the standards set forth in all other relevant portions
of this Part 1.
In addition, to minimize congestion at business access points, the following limitation shall
apply to all arterial streets in the HC Zoning District. There shall be no more than two access
points on an arterial street for every one lot of record; provided, however, that:
If a primary access to a lot of record is available on an intersecting street, then access on
the arterial street shall be limited to one access per lot of record; and
Such access on an arterial street is granted only provided that there is a minimum of 80
feet from such access to the right-of-way of any intersecting street. This shall be limited to
11/21/23, 9:26 AM City of Walhalla, SC HC Highway Commercial District.
https://ecode360.com/print/WA4233?guid=37535796 3/3
(c)
(2)
(3)
(a)
(b)
(c)
(4)
(5)
(6)
(7)
one access per lot of record; and
There shall be no more than one access point granted within a given 50 feet of frontage.
Minimum lot size: 20,000 square feet.
Minimum setback requirements.
Front: 40 feet.
Side: 10 feet on either side, but the total shall not be less than 25 feet.
Rear: 20 feet.
Maximum height of building: four stories or 56 feet.
[Amended at time of adoption of Code (see Ch. 1, General Provisions, Art. II)]
Maximum structure surface coverage of lot: 60%.
Rear yard setback areas may be used for parking.
Parking shall be located in the rear or side yard of the use. Parking areas existing when this
ordinance provision became effective may be used to meet parking needs for reuse of existing
buildings in the HC District.
11/29/2023
2023-133
Photographs
Applicant: Barbara Griffey
Location: East Main Street
§ 330-1.24. Purpose and applicability.
The purpose of this City of Walhalla Sign Ordinance is to protect public safety and
welfare and to ensure the maintenance of an orderly community sign environment,
while satisfying the needs of the sign owners for adequate identification, communication
and advertising. This article regulates the number, size, placement and physical
characteristics of signs, exempts certain signs and requires permits for certain signs.
From and after the adoption of this article, no sign may be erected within the City of
Walhalla unless it conforms to the requirements of this article.
§ 330-1.25. General regulations.
A. Definitions. As used in this article, the following terms shall have the meanings
indicated:
ABANDONED SIGN — A sign structure that has ceased to be used, and the owner
intends no longer to have used, for the display of sign copy, or as otherwise defined
by state law.
ANIMATED SIGN — A sign employing actual motion or the illusion of motion.
Animated signs, which are differentiated from changeable signs as defined and
regulated by this code, include the following types:
ARCHITECTURAL PROJECTION — Any projection that is not intended for
Electrically activated: Animated signs producing the illusion of movement by
means of electronic, electrical or electromechanical input and/or illumination
capable of simulating movement through employment of the characteristics of
one or both of the classifications noted in Subsections (a) and (b) as follows:
Flashing: Animated signs or animated portions of signs where the
illumination is characterized by a repetitive cycle in which the period
of illumination is either the same as or less than the period of
nonillumination. For the purposes of this article, "flashing" will not be
defined as occurring if the cyclical period between on-off phases of
illumination exceeds four seconds.
(a)
Patterned illusionary movement: Animated signs or animated portions
of signs where the illumination is characterized by simulated movement
through alternate or sequential activation of various illuminated elements
for the purpose of producing repetitive light patterns designed to appear
in some form of constant motion.
(b)
(1)
Environmentally activated: Animated signs or devices motivated by wind,
thermal changes or other natural environmental input. Includes spinners,
pinwheels, pennant strings and/or other devices or displays that respond to
naturally occurring external motivation.
(2)
Mechanically activated: Animated signs characterized by repetitive motion
and/or rotation activated by a mechanical system powered by electric motors
or other mechanically induced means.
(3)
City of Walhalla, SC
Downloaded from https://ecode360.com/WA4233 on 2023-11-20
occupancy and that extends beyond the face of an exterior wall of a building, but
that does not include signs as defined herein. See also "awning"; "backlit awning";
and "canopy, attached and freestanding."
AWNING — An architectural projection or shelter projecting from and supported
by the exterior wall of a building and composed of a covering of rigid or nonrigid
materials and/or fabric on a supporting framework that may be either permanent or
retractable, including such structures that are internally illuminated by fluorescent
or other light sources.
AWNING SIGN — A sign displayed on or attached flat against the surface or
surfaces of an awning. See also "wall or fascia sign."
BACKLIT AWNING — An awning with a translucent covering material and a
source of illumination contained within its framework.
BANNER — A sign, with or without characters, letters, illustrations or
ornamentation, applied to cloth, paper, plastic or natural or synthetic fabric of any
kind, with only such material for a backing. For purposes of this article, a banner is
defined only as a temporary sign when used outdoors.
BANNER SIGN — A sign utilizing a banner as its display surface.
BILLBOARD — See "off-premises sign" and "outdoor advertising sign."
BUILDING ELEVATION — The entire side of a building, from ground level to
the roofline, as viewed perpendicular to the walls on that side of the building.
CANOPY (ATTACHED) — A multisided overhead structure or architectural
projection supported by attachments to a building on one or more sides and either
cantilevered from such building or also supported by columns at additional points.
The surface(s) and/or soffit of an attached canopy may be illuminated by means of
internal or external sources of light. See also "marquee."
CANOPY (FREESTANDING) — A multisided overhead structure supported by
columns, but not enclosed by walls. The surface(s) and/or soffit of a freestanding
canopy may be illuminated by means of internal or external sources of light.
CANOPY SIGN — A sign affixed to the visible surface(s) of an attached or
freestanding canopy.
CHANGEABLE SIGN — A sign with the capability of content change by means
of manual or remote input, including signs which are:
COMBINATION SIGN — A sign that is supported partly by a pole and partly by a
building structure.1
Electrically activated: changeable sign where the message copy or content
can be changed by means of remote electrically energized on-off switching
combinations of alphabetic or pictographic components arranged on a display
surface. Illumination may be integral to the components, such as characterized
by lamps or other light-emitting devices; or it may be from an external light
source designed to reflect off the changeable component display. See also
"electronic message sign or center."
(1)
City of Walhalla, SC
§ 330-1.25 § 330-1.25
Downloaded from https://ecode360.com/WA4233 on 2023-11-20
DEVELOPMENT COMPLEX SIGN — A freestanding sign identifying a multiple-
occupancy development, such as a shopping center or planned industrial park,
which is controlled by a single owner or landlord.
DIRECTIONAL SIGN — Any sign that is designed and erected for the purpose of
providing direction and/or orientation for pedestrian or vehicular traffic.
DOUBLE-FACED SIGN — A sign with two faces, back to back.
ELECTRIC SIGN — Any sign activated or illuminated by means of electrical
energy.
ELECTRONIC MESSAGE SIGN OR CENTER — An electrically activated
changeable sign where the variable message capability can be electronically
programmed.
EXTERIOR SIGN — Any sign placed outside a building.
FASCIA SIGN — See "wall or fascia sign."
FLASHING SIGN — See "animated sign, electrically activated."
FREESTANDING SIGN — A sign principally supported by a structure affixed to
the ground, and not supported by a building, including signs supported by one or
more columns, poles or braces placed in or upon the ground.
FRONTAGE (BUILDING) — The length of an exterior building wall or structure
of a single premises orientated to the public way or other properties that it faces.
FRONTAGE (PROPERTY) — The length of the property line(s) of any single
premises along either a public way or other properties on which it borders.
GROUND SIGN — See "freestanding sign."
ILLUMINATED SIGN — A sign characterized by the use of artificial light,
either projecting through its surface(s) (internally illuminated) or reflecting off its
surface(s) (externally illuminated).
INTERIOR SIGN — Any sign placed within a building, but not including window
signs as defined by this article. Interior signs, with the exception of window signs
as defined, are not regulated by this chapter.
MANSARD — An inclined decorative rooflike projection that is attached to an
exterior building facade.
MARQUEE — See "canopy (attached)."
MARQUEE SIGN — See "canopy sign."
MENU BOARD — A freestanding sign orientated to the drive-through lane for a
restaurant that advertises the menu items available from the drive-through window,
and which has not more than 20% of the total area for such a sign utilized for
business identification.
1. Editor's Note: The definition of "copy," which immediately followed this definition, was repealed at time of adoption of
Code (see Ch. 1, General Provisions, Art. II).
City of Walhalla, SC
§ 330-1.25 § 330-1.25
Downloaded from https://ecode360.com/WA4233 on 2023-11-20
MONUMENT SIGN — A ground-mounted sign in which the area between the
bottom edge of the sign and the ground is substantially filled with a solid
architectural material. Solid architectural materials include wood, brick, stone,
masonry or hard-coat stucco, but do not include aluminum or similar materials.
MULTIPLE-FACED SIGN — A sign containing three or more faces.
OFF-PREMISES SIGN — See "outdoor advertising sign."
ON-PREMISES SIGN — A sign erected, maintained or used in the outdoor
environment for the purpose of the display of messages appurtenant to the use of,
products sold on or the sale or lease of the property on which it is displayed.
OUTDOOR ADVERTISING SIGN — A permanent sign erected, maintained or
used in the outdoor environment for the purpose of the display of commercial or
noncommercial messages not appurtenant to the use of, products sold on or the sale
or lease of the property on which it is displayed.
PARAPET — The extension of a building facade above the line of the structural
roof.
POLE SIGN — See "freestanding sign."
POLITICAL SIGN — A temporary sign intended to advance a political statement,
cause or candidate for office. A legally permitted outdoor advertising sign shall not
be considered to be a political sign.
PORTABLE SIGN — Any sign not permanently attached to the ground or to a
building or building surface.
PROJECTION SIGN — A sign other than a wall sign that is attached to or projects
more than 18 inches (457 mm) from a building face or wall or from a structure
where the primary purpose is other than the support of a sign.
REAL ESTATE SIGN — A temporary sign advertising the sale, lease or rental of
the property or premises upon which it is located.
REVOLVING SIGN — A sign that revolves 360° (6.28 rad) about an axis. See also
"animated sign, mechanically activated."
ROOFLINE — The top edge of a peaked roof or, in the case of an extended facade
or parapet, the uppermost point of said facade or parapet.
ROOF SIGN — A sign mounted on, and supported by, the main roof portion of a
building, or above the uppermost edge of a parapet wall of a building and which
is wholly or partially supported by such a building. Signs mounted on mansard
facades, pent eaves and architectural projections, such as canopies or marquees,
shall not be considered to be roof signs.
SANDWICH BOARD SIGN — A freestanding temporary sign, with no moving
parts or lights, which is displayed outside a business during business hours to
advertise the business, hours of operation, an event or a promotion. It is not
intended as a permanent business sign.[Amended at time of adoption of Code (see
Ch. 1, General Provisions, Art. II)]
City of Walhalla, SC
§ 330-1.25 § 330-1.25
Downloaded from https://ecode360.com/WA4233 on 2023-11-20
SIGN — Any device visible from a public place that displays either commercial
or noncommercial messages by means of graphic presentation of alphabetic or
pictorial symbols or representations. Noncommercial flags or any flags displayed
from flagpoles or staffs will not be considered to be signs.
SIGN AREA — The area of the smallest geometric figure, or the sum of the
combination of regular geometric figures, which comprises the sign face. The area
of a sphere shall be computed as the area of a circle. The area of all other multiple-
sided signs shall be computed as 50% of the sum of the area of all faces of the
sign.[Amended at time of adoption of Code (see Ch. 1, General Provisions, Art.
II)]
SIGN COPY — Those letters, numerals, figures, symbols, logos and graphic
elements comprising the content or message of a sign, exclusive of numerals
identifying a street address only.
SIGN FACE — The surface upon, against or through which the sign copy is
displayed or illustrated, not including structural supports, architectural features of
a building or sign structure, nonstructural or decorative trim or any areas that are
separated from the background surface upon which the sign copy is displayed by a
distinct delineation, such as a reveal or border.
SIGN STRUCTURE — Any structure supporting a sign.
TEMPORARY SIGN —
In the case of panel or cabinet-type signs, the sign face shall include the
entire area of the sign panel, cabinet or face substrate upon which the sign
copy is displayed or illustrated, but not open space between separate panels or
cabinets.
(1)
In the case of sign structures with routed areas of sign copy, the sign face shall
include the entire area of the surface that is routed, except where interrupted
by a reveal, border or a contrasting surface or color.
(2)
In the case of signs painted on a building, or individual letters or graphic
elements affixed to a building or structure, the sign face shall comprise the sum
of the geometric figures or combination of regular geometric figures drawn
closest to the edge of the letters or separate graphic elements comprising the
sign copy, but not the open space between separate groupings of sign copy on
the same building or structure.
(3)
In the case of sign copy enclosed within a painted or illuminated border, or
displayed on a background contrasting in color with the color of the building
or structure, the sign face shall comprise the area within the contrasting
background, or within the painted or illuminated border.
(4)
A sign intended to display either commercial or noncommercial messages of
a transitory or temporary nature. Portable signs or any sign not permanently
embedded in the ground, or not intended to be permanently affixed to a
building or sign structure that is permanently embedded in the ground, are
(1)
City of Walhalla, SC
§ 330-1.25 § 330-1.25
Downloaded from https://ecode360.com/WA4233 on 2023-11-20
UNDER-CANOPY SIGN or UNDER-MARQUEE SIGN — A sign attached to the
underside of a canopy or marquee.
V SIGN — A sign containing two faces of approximately equal size, erected upon
common or separate structures, positioned in a "V" shape with an interior angle
between faces of not more than 90° (1.57 rad), with the distance between the sign
faces not exceeding five feet (1524 mm) at their closest point.
WALL OR FASCIA SIGN — A sign that is in any manner affixed to any exterior
wall of a building or structure and that projects not more than 18 inches (457
mm) from the building or structure wall, including signs affixed to architectural
projections from a building, provided the copy area of such signs remains on a
parallel plane to the face of the building facade or to the face or faces of the
architectural projection to which it is affixed.
WINDOW SIGN — A sign affixed to the surface of a window with its message
intended to be visible to and readable from the public way or from adjacent
property.
considered temporary signs.
Types of temporary signs.
GRAND OPENING SIGN — A sign that displays the words "Grand
Opening" to announce the opening of a new business.
(a)
INTERIM SIGN — A sign intended to provide signage while the
permanent sign is being fabricated, repaired or prepared for installation.
(b)
TEMPORARY PROMOTIONAL SIGN — A sign intended to attract
attention to a use or activity for a limited number of events.
(c)
TEMPORARY SPECIAL EVENT SIGN — A sign for special
community activities or seasonal events.
(d)
(2)
B. Exempt signs. The following signs are exempt from the provisions of this article
and require no permit:
(1) Traffic, directional, warning or information signs authorized by any public
agency.
(2) Official notices authorized by any court, public agency or official.
(3) Institutional signs, not to exceed 20 square feet, for any public, charitable,
educational, medical or religious institution.
(4) Building nameplates with related inscription, memorial plaques and
cornerstones, when made an integral part of a building or structure.
(5) Flags and flagpoles.
(6) On-site directional signs, not to exceed six square feet in area.
City of Walhalla, SC
§ 330-1.25 § 330-1.25
Downloaded from https://ecode360.com/WA4233 on 2023-11-20
(7) One-time auction signs, not to exceed six square feet in area.
(8) Private property postings related to trespassing or public safety.
(9) Religious symbols and seasonal decorations within the appropriate public
holiday season.
(10) "Open house" signs, not to exceed four square feet in area.
(11) Temporary unlighted real estate (for sale, rent, lease) signs for residential, not
to exceed four square feet in area, or for commercial, not to exceed 32 square
feet in area, per property, and not to exceed eight feet in height, are allowed,
provided the proper permit or business license has been obtained. The signs
shall be removed not later than five days after the execution of a lease
agreement or closing of the sale. Banner-type signs are not permitted.
(12) Political signs, subject to the following limitations:
(a) Such signs shall not exceed a height of eight feet or a total area of 32
square feet.
(b) Such signs for election candidates or ballot propositions shall be
displayed on public rights-of-way only for a period of 15 days preceding
the election and shall be removed within 10 days after the election,
provided that signs promoting successful candidates or ballot
propositions in a primary election or unopposed primary candidates and
certified petition candidates may remain displayed until not more than 10
days after the general election. Political signs may not be displayed in the
medians or rights-of-way on Main Street from Ann Street to Tugaloo
Street. [Amended 4-20-2021 by Ord. No. 2021-4]
(c) The maximum number of political signs per street frontage will be one
every 25 feet.
C. Prohibited signs. The following signs are prohibited:
(1) Strobe or neon lights, and signs containing strobe, LED or flashing lights
which are visible beyond the property line. This does not include a storefront
stationary lit, open/closed sign.
(2) Any sign attached to, or placed on, a vehicle or trailer parked on public or
private property, except for signs meeting the following conditions:
(a) The primary purpose of such a vehicle or trailer is not the display of signs.
(b) The signs are magnetic, decals or painted upon an integral part of the
vehicle or equipment as originally designed by the manufacturer, and do
not break the silhouette of the vehicle.
(c) The vehicle or trailer is in operating condition, currently registered and
licensed to operate on public streets when applicable, and actively used
City of Walhalla, SC
§ 330-1.25 § 330-1.25
Downloaded from https://ecode360.com/WA4233 on 2023-11-20
or available for use in the daily function of the business to which such
signs relate.
(3) Abandoned signs.
(4) Rooftop signs.
(5) Off-premises signs.
(6) Contractor's signs.
(7) A sign or sign structure which obstructs free and clear vision at intersections,
or by its position, shape or color may interfere with or obstruct the view of or
be confused with any authorized traffic sign, signal or device.
D. Permitted signs. The following signs are allowed, subject to the permitting
requirements of § 330-1.26, Permitting process, and the applicable development
regulations of this Part 1.
(1) Permanent freestanding business identification signs.
(a) Allowable area: not to exceed 36 square feet in area for a single business,
or 120 square feet for multiple businesses on the same panel.
(b) Number. One freestanding sign is allowed for each developed site, lot or
parcel on which a nonresidential use is constructed. Where a site or parcel
fronts on more than one street, one freestanding sign is permitted for each
street. Where two or more businesses or buildings occupy the same site
or parcel controlled by a single owner or landlord (shopping center or
industrial park), only one freestanding sign for the aggregate businesses
shall be permitted per street frontage.
(c) Location. No freestanding sign shall:
[1] Be located nearer than five feet to any property line, nor shall such
sign face overhang or extend beyond the property line or in any way
impair visual clearance at driveway or street intersections.
[2] Be set back less than 10 feet from any street right-of-way line.
[3] Be permitted in the Downtown Development Overlay District unless
it meets all Downtown Design Guidelines, is aesthetically
appropriate and is approved by City Council.
(d) Height: not higher than eight feet above finished grade of the ground at
the sign base, except a maximum height of 30 feet from the ground
(pavement) is permitted in Highway Commercial or Light Industrial
Districts only.
(e) In Office Commercial Districts, a sign may be of berm or solid base
design. Application for berm design must be accompanied by a landscape
maintenance plan.
City of Walhalla, SC
§ 330-1.25 § 330-1.25
Downloaded from https://ecode360.com/WA4233 on 2023-11-20
(f) Where average elevation of a lot is lower than the finished grade of the
abutting edge of the sidewalk, a pole or support may be permitted to raise
the sign to the level allowed by height regulations.
(g) Sign must be permanently affixed. A solid base sign shall be ground-
mounted, solid all the way to the ground and constructed of wood, brick,
masonry or similar durable materials.
(2) Permanent signs attached to buildings.
(a) Allowable area. The total area of signs on the exterior front surface of a
building shall not exceed 25% of the front surface area of the building.
The same will be required of signage on the sides and rear surfaces of the
buildings.
(b) Window coverage.
[1] In the Downtown Development Overlay District, window or door
signs may occupy up to 25% of the storefront glass, and are only
allowed on the first floor of the building. All window and door
signage in excess of the allowable 25% of the storefront glass should
be counted against the overall allowed sign area for that side of the
building. Windows are not permitted to be covered on the interior or
exterior by plastic, tarps, paper or similar materials unless
undergoing active renovations or repairs. Coverage is limited to 90
days. Extension may be permitted where required with written
request to the Zoning Administrator.
[2] Outside of the Downtown Development Overlay District, signage in
or on windows, inside or outside, shall not exceed 50% of any front-
facing window.
(c) No part of any sign attached to a building, in any manner, shall extend
above the uppermost point of each building.
(d) Signs shall be limited to the use, business or profession conducted on the
premises; except that a sign from a previous business, within that
structure, that is otherwise significant or of historical value may be
displayed, provided it is properly maintained by the present owner.
(e) Letters, decorations and facings of signs shall be constructed of durable
materials approved by the Building Official.
(f) Restaurants shall be permitted to display one menu (in an enclosed case)
or menu board, provided that such shall not exceed nine square feet.
(3) Awnings/Canopies.
(a) Awnings/Canopies shall be no closer than 18 inches to a vertical plane at
the street curbline and have a minimum height of 8.5 feet above the
sidewalk. [Amended at time of adoption of Code (see Ch. 1, General
City of Walhalla, SC
§ 330-1.25 § 330-1.25
Downloaded from https://ecode360.com/WA4233 on 2023-11-20
§ 330-1.26. Permitting process.
Provisions, Art. II)]
(b) Awning/Canopy signs shall consist of the name of the business and
numerical address only, with copy area not to exceed an area equal to
25% of the background area of the awning/canopy.
(4) Temporary signs. Temporary signs are permitted to be erected no more than
30 days prior to such sale or grand opening; provided such exhibits are
removed within seven day after the event; and further provided that not more
than one extension of 30 days may be granted upon request, and no exhibit
shall be re-permitted within six months of the time it, or a similar display, is
removed from the premises. In the Downtown Development Overlay District,
a maximum of two temporary signs are permitted per property. Maximum sign
area is 18 square feet per sign.
(5) Sandwich board signs.
(a) Sandwich board signs will be limited to a maximum area of nine square
feet in area per side and cannot exceed 42 inches in height. They shall not
be placed more than five feet from the front of the primary entrance of
the business and be displayed only during business hours of the business
utilizing the sandwich board. Only one sandwich board sign per business
is allowed; and sandwich board signs shall not be allowed within a
roadway or public right-of-way, except in cases where the Zoning
Administrator may approve a permit for it to be located within a public
sidewalk directly adjacent to a business. In such cases it shall not be
placed so as to cause the width of the sidewalk to be reduced below four
feet in width, nor shall it prevent free ingress to or egress from any door,
or window or fire escape.
(b) Signs must be stored inside when the business is closed.
A. Permits.
(1) Permits required. Unless specifically exempted, a permit must be obtained
from, and approved by, the Zoning Administrator for the erection, alteration,
construction, reconstruction, attachment to the exterior of any building,
temporary and maintenance of all signs erected or maintained within the City
of Walhalla and in accordance with other ordinances of this jurisdiction.
Exemptions from the necessity of securing a permit, however, shall not be
construed to relieve the owner of the sign involved from responsibility for its
erection and maintenance in a safe manner and in a manner in accordance with
all other provisions of this Part 1.
(2) Construction documents. Before any permit is granted for the erection of a sign
or sign structure requiring such permit, construction documents shall be filed
with the Zoning Administrator showing the dimensions, materials and required
City of Walhalla, SC
§ 330-1.25 § 330-1.26
Downloaded from https://ecode360.com/WA4233 on 2023-11-20
details of construction, including loads, stresses, anchorage and any other
pertinent data. The permit application shall be accompanied by the written
consent of the owner or lessee of the premises upon which the sign is to
be erected and by engineering calculations signed and sealed by a registered
design professional where required by the International Building Code.
(3) Changes to signs. No sign shall be structurally altered, enlarged or relocated,
except in conformity to the provisions herein, nor until a proper permit, if
required, has been secured. The changing or maintenance of movable parts or
components of an approved sign that is designed for such changes, or the
changing of copy, business names, lettering, sign faces, colors, display and/or
graphic matter, or the content of any sign shall not be deemed a structural
alteration.
(4) Permit fees. Permit fees to erect, alter or relocate a sign shall be in accordance
with the fee schedule adopted within the City of Walhalla.
B. Development standards. All signs allowed by this article must comply with the
following development standards:
(1) Clearance. Clearances are measured from the grade directly below the sign to
the bottom of the sign structure enclosing the sign face.
(a) Visual clearance. No sign may be located within a vision clearance area
as defined by § 330-1.41 of this Part 1, and no support structure for a sign
may be located in a vision clearance area unless the diameter is 12 inches
or less. [Amended at time of adoption of Code (see Ch. 1, General
Provisions, Art. II)]
(b) Vehicle area clearance. When a sign extends over a private area where
vehicles travel or are parked, the bottom of the sign structure shall be at
least 14 feet above grade. Vehicle areas include driveways, alleys,
parking lots, loading zones and maneuvering areas.
(c) Pedestrian area clearance. When a sign extends over private sidewalks or
walkways, the bottom of the sign structure shall be at least 8.5 feet above
the grade.
(d) Required yards and setbacks. The sign face of a sign structure may be
erected in required yards and setbacks, but no closer than five feet to any
property line.
(2) Sign measurement.
(a) Sign face area.
[1] The area of sign faces enclosed in frames or cabinets is determined
based on the outer dimensions of the frame or cabinet surrounding
the sign face. Sign area does not include foundations or supports.
Only one side, the largest single face, of a double-faced or V-shaped
City of Walhalla, SC
§ 330-1.26 § 330-1.26
Downloaded from https://ecode360.com/WA4233 on 2023-11-20
freestanding sign is counted. [Amended at time of adoption of
Code (see Ch. 1, General Provisions, Art. II)]
[2] When a sign is on a base material and attached without a frame, such
as a wood board or Plexiglas panel, the dimensions of the base
material are to be used unless it is clear that part of the base contains
no sign-related display or decoration.
[3] When signs are constructed of individual pieces attached to a
building wall, sign area is determined by a perimeter drawn around
all the pieces.
[4] For sign structures containing multiple modules oriented in the same
direction, the modules together are counted as one sign face.
[5] For a round or three-dimensional sign, the maximum surface area
visible at one time is counted to determine sign face area.
(3) Sign design, construction and maintenance.
(a) All signs, except those protected by transparent cover, shall be
constructed of materials which will not rapidly deteriorate, fade, fall apart
or otherwise become a hazard to public safety and the general welfare.
The sign shall be securely fastened and placed to withstand adverse
weather.
(b) All signs allowed under this article must comply with applicable
requirements of the International Building Code, National Electrical
Code and other applicable federal, state or local codes.
(c) All signs shall be kept free from defective or missing parts or peeling
paint. The Zoning Administrator shall possess the authority to order
painting, repair or alteration of a sign which constitutes a hazard to the
public health, safety, general welfare or has lost its visual integrity by
reason of inadequate maintenance, dilapidation or obsolescence. Notice
of such repair shall be given to the owner by personal service, or
registered mail, return receipt requested.
(d) The immediate premises around a sign shall be kept free from litter and
debris.
(4) Removal of nonconforming signs.
(a) Any sign now or hereafter existing which no longer advertises a bona fide
business conducted, or product sold, shall be taken down and removed by
the owner of the property, or agent thereof, whereon the sign may be
found, unless the sign falls within the exception granted by
§ 330-1.25D(2)(d) of this article. Such removal is to take place within a
period of 30 days following cessation of effective use of the sign or
closing of the business. [Amended at time of adoption of Code (see Ch.
City of Walhalla, SC
§ 330-1.26 § 330-1.26
Downloaded from https://ecode360.com/WA4233 on 2023-11-20
§ 330-1.27. Appeals.
All questions arising in connection with the enforcement of this article shall be presented
first to the Zoning Administrator. The Zoning Administrator shall issue a written
decision to all such questions and shall send it to the person filing the question. Appeal
may be made to the Board of Zoning Appeals by written notice given to it within 10 days
after receipt of written decision.
1, General Provisions, Art. II)]
(b) All signs and sign structures, with the exception of freestanding signs,
billboards and monument signs, which are nonconforming to the
standards of this article, but which were lawfully erected under the
requirement of previously existing regulations, shall be removed by the
owner of the sign or owner of the property upon which the sign is erected
within 120 days from the effective date of this article. The lawful use of
a nonconforming freestanding sign, billboard or monument sign may be
continued indefinitely. However, should the cost of any proposed
replacement, based on damage or upgrading, exceed 75% of the existing
sign value, said sign must be brought into compliance with the
requirements of this article. Any improvement or change to signage must
meet Downtown Design Guidelines within the Downtown Development
Overlay District. Any sign owner or property owner who believes this
schedule does not minimize their loss, recoup initial investment or is
generally unreasonable, given the specific conditions of that sign or sign
structure, may petition for relief. Such requests shall contain sufficient
documentation upon which a determination can be made and shall include
a copy of the building permit to determine age of the sign, and
construction contract to determine initial cost of the sign.
City of Walhalla, SC
§ 330-1.26 § 330-1.27
Downloaded from https://ecode360.com/WA4233 on 2023-11-20
Downtown Walhalla Design Guidelines
Design for a Livable Downtown
Spring 2017
City Council
Danny Edwards – Mayor
Jennifer Crawford – Mayor Pro-Tem
Tjay Bagwell – Council Member
Lamar Bailes – Council Member
Josh Holliday – Council Member
David Underwood – Council Member
Danny Woodward – Council Member
Downtown Development Committee
Jennifer Crawford
Danny Edwards
Lamar Bailes
Brent Taylor
Helen Westmoreland
Blake Norton
Oconee County
Bill Huggins – Oconee County Planning Department
Janet Hartman – Oconee Economic Alliance
Project Team
Alta Planning + Design, Inc.
John Cock – Principal-in-Charge
Blake Sanders – Project Manager
Tee Coker – Senior Planner
Calin Owens – Designer
Project Participants
The City would like to acknowledge and thank those who contributed to t he Downtown Walhalla Design
Guidelines. In addition to those listed below, numerous individuals pro vided insight, expertise, and other
contributions that informed this project.
Table of Contents
Introduction and Purpose of Design Guidelines
6
Purpose of Design Guidelines .............................6
Downtown Design Guidelines Goals .................6
Design Review Application Process ...................6
Design Principles ...................................................7
Design Guidelines for Site Design, the Public
Streetscape , and Buildings .............................12
Building and Site Lighting ..................................12
Streets .....................................................................14
Sidewalks ...............................................................16
Pedestrian Interest ...............................................19
Building Placement and Orientation ................20
Building Mass, Scale, and Height ......................21
Building Materials ................................................23
Architectural Character .......................................24
Facade Elements ...................................................25
General Notes for Paint and Awning Palettes 27
Site Development: Cut and Fill ..........................30
Site Retaining Walls .............................................31
Mechanical Equipment and Service Utilities ..32
Design Guidelines for Parking Facilities ........34
Surface Parking.....................................................34
Security and Pedestrian Circulation in Parking
Facilities .................................................................34
Design Guidelines for Signage ........................36
Appropriate Sign Types .......................................36
Sign Composition .................................................37
Sign Character ......................................................37
Sign Materials .......................................................37
Sign Lighting .........................................................38
Sign Installation ....................................................38
Sign Color ..............................................................38
General Notes for Signage .................................40
General Notes for Fonts .....................................42
Example Application of Design Guidelines ....44
Appendix A: Photographic Inventory of the
Downtown Development Area ........................47
Appendix B: Recommended Landscape Palette
Acceptable Species ...............................................81
Chapter 1: Introduction and Purpose of Design Guidelines
6 | Downtown Walhalla Design Guidelines
increased pedestrian activity and visual interest along
the street. As an integral part of the City of Walhalla’s
improvement strategy, these guidelines provide a
proactive means of encouraging development that is
consistent with the Downtown Master Plan.
1. Developers and property owners can use the
guidelines to better understand the potential for
development consistent with the City’s vision for
downtown prior to implementing new buildings or
renovation projects.
2. The City’s Planning and Building Inspection
Department and Planning Commission can use the
guidelines as a consistent framework for reviewing
new projects.
Downtown Design Guidelines Goals
■ Build a desirable place to live with a variety of
housing choices, convenient services, and a
diversity of entertainment opportunities ;
■ Support a pedestrian-oriented environment that
connects to surrounding neighborhoods;
■ Create a memorable downtown experience that is
attractive, safe, and inviting;
■ Construct a visually attractive and economically
vibrant urban center;
■ Assure new development relates to the character
of downtown and is compatible with surrounding
neighborhoods;
■ Ensure public and private outdoor spaces are
enjoyable and accessible; and
■ Encourage sustainable building and land
management best practices.
Design Review Application Process
No new design review process or commission is proposed
as a part of the design guidelines. The current appeals
process will remain in place.
Introduction and Purpose of Design Guidelines
Walhalla is a unique community with a rich diversity of cultures and traditi ons. The Walhalla Downtown
Master Plan, adopted in 2015, was the first step in developing a vision for Downtown Walhalla based on the
community’s history, connection to the Blue Ridge Mountains, and the man y cultural amenities that exist
within the walkable downtown area.
Some of the key implementation recommendations from
the Downtown Master Plan include the following:
1. Initiate a Downtown Development Committee to
monitor and promote the Downtown.
2. Develop design guidelines for private improvements
and development.
3. Develop a streetscape plan for public
improvements.
4. Implement a facade program with City implemented
grants.
5. Develop and implement a vehicular and pedestrian
wayfinding signage program.
These actions are all interrelated in the effort to create
a cohesive downtown combining public and private
improvements. They also reinforce a partnership between
the City and private business and property owners.
Purpose of Design Guidelines
The purpose of the guidelines is to create site and
building designs consistent with the City’s principles,
goals, and policies. The document is organized by design
guideline topics with each section containing guidelines
dealing with specific topics.
The Downtown Design Guidelines set parameters for
design, but also allow design flexibility and creative design
solutions. Proposed development in the Downtown
Development Area is expected to respond to the design
guidelines and standards in a manner that complements
the historic character of the City of Walhalla.
The City may permit a deviation from a specific standard
if it is determined that public benefit may be achieved
by an alternative proposal. The alternative proposal must
be consistent with the intent of the guidelines and with
the City’s overall goals and policies. The applicant must
demonstrate that the proposed deviation will result in
Design for a Livable Downtown | 7
All development within the Downtown Development
Area (see maps at the end of this section) is required
to meet the requirements of downtown design review.
Downtown Design Review is conducted by the Zoning
Administrator. The scope of work associated with an
individual project will determine the extent to which
design guidelines will be applied. Proposals that will not
modify a building exterior or the site are exempt from
Downtown Design Review; however, fire safety, zoning,
and other codes may still need review and approval prior
to construction or occupancy. Existing uses that are not
in conformance with the guidelines would be allowed
to remain until there is a change in use, or building
remodeling/renovation is undertaken.
Before preparing development plans in the Downtown
Area, applicants should review the guidelines in their
entirety. City staff will discuss guidelines and standards
with the applicant either during a pre-application meeting
or informal pre-development design meeting in order to
assist the applicant with final design approval.
For details on the application and review process, see the
Walhalla Code of Ordinances; if you have questions, City
staff are available to assist you.
Design Principles
No zoning code or design guideline can cover all
possible development scenarios. These design
principles should guide decision- making regarding
appropriate development.
1. Establish and maintain a unified, improved
identity for Downtown Walhalla.
The Master Plan suggests projects and goals for stabilizing
and improving the image and economic prospects for
Downtown Walhalla. The Downtown Design Guidelines
will establish a suggested image identity to support
these goals. Future public and private projects should
strive to build on and strengthen that identity based
on the strengths of its history, architecture, location,
and residents. This improved image will be established
through early priority projects defined in the plan and
in opportunities yet to come, and by focused events and
publicity on positive actions and developments.
2. Respect and build on the historic character of
Downtown Walhalla.
There are many historic and contributing buildings
in the Downtown Development Overlay District. A
mechanism should be created to evaluate these buildings
in order to decide which should be protected and to plan
for adaptive reuse and/or restoration. If the buildings
have historic or architectural significance, individual
listing of the buildings at the state or federal level should
be considered, especially because of the potential tax
benefits of doing so. If state or federal listing is not
possible, a local registry could be created.
3. Strive to establish traditional “Downtown”
elements of design throughout Downtown Walhalla.
In the Downtown District, a sense of architectural
enclosure, seating areas, areas of shade and sun, attractive
streetscapes, cafes, and a richness of experience in the
public environment should be the goal. Attractive and
significant architecture in a refined landscaped setting
should be combined with carefully maintained parks
and gathering spaces and shaded walks and streetscapes.
The character of a community is also expressed through
such thoughtful elements as pedestrian connection of
buildings to the street, landscaping and screening of
parking areas, abundant street trees, and enclosure of
the street through similar building heights and setbacks
along with landscaping.
4. Encourage mixed uses downtown with appropriate
architecture and urban design.
Research shows that the success of a downtown is
dependent on a synergistic mix of uses including office,
retail, restaurant, civic, and residential. Mixed uses help
ensure activity and security at all times of the day and
evening and support commercial uses by extending the
cycle of activity. This mix of uses is part of the vision of
the Downtown Master Plan. The City, developers, and
partners should ensure a lively mix of uses, and public
improvements should be aimed at making the area more
attractive and inviting both day and night.
8 | Downtown Walhalla Design Guidelines
9. Give priority to pedestrians.
The goal of all elements in the plan and guidelines should
be to create an attractive and walkable environment that
responds primarily to the needs of people rather than
automobiles. Creating a pedestrian-friendly environment
includes the following elements:
■ Barrier-free design both on the street and into and
around buildings
■ Separation between pedestrians, bikes and vehicles
■ Creation of an interconnected pedestrian system
within the entire downtown including sidewalks,
street crosswalks (with crossing lights where
necessary), and enhanced connections between
parking and the street
■ A comprehensive system of public signage to orient
and inform visitors to Downtown Walhalla
■ Mid-block pedestrian connections on long blocks,
and/or public passageways through central sections
of large buildings to connect parking areas and the
street
■ Design of streets to include the incorporation of
bicycle and pedestrian facilities
10. Create pedestrian spaces in retail and commercial
areas that add to the life of Downtown Walhalla.
In retail and commercial areas, the emphasis should be
on enjoying the area on foot. This translates into the
need for connections, wayfinding signage, interesting
architecture, sun and shade, safe and attractive sidewalks,
streets, parks and plazas, and planned activities,
entertainment, and events. Private enterprise should also
be encouraged to add to the success of the downtown
through the provision of such amenities as sidewalk cafes
and restaurants, seating areas, screening and landscaping.
This can be encouraged through a sense of civic pride
or by more direct means such as grants, loans, or the
granting of desired variances.
5. Avoid suburban or rural land-use patterns in the
downtown.
“Strip”-type development, continuous driveways along
the edges of properties, parking in front of buildings,
lack of screening, and lack of pedestrian amenities
discourage people from exploring the downtown on foot,
and discourage pedestrian-oriented development from
locating in Downtown Walhalla.
6. Unify Downtown Walhalla with common design
elements while allowing individual identity.
Public streetscape and green spaces should employ
common design elements, such as paving materials,
lighting, street furniture and building materials in order
to create a unified character for Downtown Walhalla.
Likewise, architecture should have elements that are
repetitive or common in order to unify the whole.
Within this unifying structure, however, there should
still be ample room for individual expression. In the
same way, buildings of a certain type (office, commercial,
residential) should be similar, but not repetitive.
7. Enhance gateways and view corridors.
The public and private design of areas that serve as
gateways into the downtown, or that terminate views down
important streets should be given special consideration.
Gateway points into the downtown are identified in
the Downtown Master Plan. These areas provide the
opportunity to welcome visitors and residents into the
downtown, and to establish or reinforce the unique
identity of the area. In addition, gateways and sites at
the termination of important streets or view corridors
require architecture that enhances the importance of
these areas through the use of special features such as
buildings that incorporate special corner treatments, and
enhanced entry elements and design.
8. Create a coordinated system of City and/or
Downtown signage.
Public vehicular signage is needed to lead motorists to and
through Downtown Walhalla and to their destinations
and nearby parking areas. Once motorists have parked and
left their vehicles, coordinated pedestrian-level signage
helps orient visitors to the downtown and informs them
about attractions. Coordinated and attractive vehicular
and pedestrian signage helps to present a quality image of
the community, welcomes people, and helps extend visits
by providing information on activities and destinations.
Design for a Livable Downtown | 9
Design for a Livable Downtown | 10
Chapter 2: Design Guidelines for Site
Design and Public Streetscape
12 | Downtown Walhalla Design Guidelines
Minimize the visual impacts of site and architectural
lighting.
■ Use exterior light sources with a low level of
luminescence.
■ Use white lights that cast a similar color to daylight.
■ Do not wash an entire building facade in light.
■ Use lighting fixtures that are compatible with and
complimentary to the building and its surroundings
in terms of style, scale, and intensity of illumination.
■ Blinking and flashing lights used to illuminate
building facades or to outline buildings are
inappropriate.
■ Interior lights to illuminate signs or canopies are
inappropriate.
Design Guidelines for Site Design, the Public Streetscape,
and Buildings
The City of Walhalla has an active downtown where pedestrians share st reets with automobiles and bicycles.
This mix of traffic can provide a sense of excitement and enhance the pedestrian experience if all the elements
are kept in balance. A unified streetscape design for the Downto wn Development Area will help maintain
a sense of visual continuity while expressing the unique qualiti es. The following guidelines are applicable to
new development and changes to existing non-contributing building s in historic Downtown Walhalla.
Building and Site Lighting
The primary function of lighting is for safety and security.
Lighting is also used to accent building character and for
advertising and sales promotion. The primary goal for
lighting in Walhalla is that it should not be detrimental
to the adjacent surroundings or the overall environment,
but should still maintain a safe environment. Lighting
the sidewalk sufficiently is a goal within Downtown. This
does not imply high levels of illumination; minimum
illumination levels are more appropriate for various
nighttime functions.
The character and level of lighting that is used on a
building is of special concern. Traditionally, exterior
lights were simple in character and were used to highlight
signs, entrances and front door details. Most fixtures had
incandescent lamps that cast a color similar to daylight,
were relatively low in intensity and were shielded with
simple shade devices. Although new lamp types may be
considered, the overall effect of modest, focused building
light should be continued.
Exterior lighting should accent, not dominate, a building
facade.
■ Primary building entrances should be the main
source of illumination.
■ Secondary accents may illuminate secondary
entrances, architectural details, and signs.
■ The use of strobe lighting is inappropriate.
■ Seasonal string lighting is appropriate.
■ Secondary accents that may illuminate other areas
of public and functional importance, such as side
or rear entrances, steps, and walks located along the
side of the building, may be appropriate.
■ The use of recessed down lighting in canopies is
appropriate.
Lighting attached to facade illuminating canopy
Design for a Livable Downtown | 13
Use shielded and focused light sources to prevent glare.
■ Provide shielded and focused light sources that direct
light downward.
■ Do not use high intensity light sources or cast light
directly upward.
■ Shield lighting associated with service areas, parking
lots and parking structures.
Minimize impacts from service and parking area lighting.
■ Security and service area lighting should be
discriminatingly utilized to illuminate the area for
surveillance as required, yet it should be prevented
from creating a hot spot of light calling attention to
it from the surrounding areas.
■ Keep parking area lighting at a human scale.
■ All parking light fixtures should be similar in design
and should be spaced throughout the parking area to
avoid regimented placement.
Street lighting fixtures should be consistent throughout
the district.
■ Unique and consistent street lighting fixtures help to
unify the streetscape of the downtown and to mark
the boundaries of the historic district.
Extensive canopy, awning, and porch lighting is
inappropriate.
■ Lighting on the underside of a canopy is appropriate
when it does not dominate the streetscape.
■ Attach light fixtures to the building facade rather the
underside of a canopy or awning.
Example of string lighting
Example of string lighting
14 | Downtown Walhalla Design Guidelines
Streets
Conceptual section of City-owned street
Conceptual section of South Carolina Department of Transportation collector street
Design for a Livable Downtown | 15
Conceptual section of South Carolina Department of Transportation arterial street
Property
Line
Pedestrian Through
Zone
Furnishing/Green
Zone
Frontage ZoneStreet Parking Lane/Enhancement
Zone
Section of sidewalk elements
16 | Downtown Walhalla Design Guidelines
Sidewalks
Early photographs of Downtown Walhalla show simple
concrete sidewalks which provide a visual unity to the
area. This tradition should be continued.
A clear and safe pedestrian travel lane should be kept
clear of all merchandise.
Sidewalk design should reflect the character of its historic
context.
■ Sidewalk designs should be modest in character
■ Sidewalks should be attached to the curb or separated
with a minimum 3 foot landscape verge.
The main sidewalk paving should be a simple concrete
finish.
■ Broom-finished, grey concrete is preferred for the
predominant material.
■ Decorative paving may be used to denote special
functional areas such as key intersections, public
plazas, and courtyards.
■ The finish texture should comply with current
accessibility requirements.
Decorative and accent paving is appropriate for key
crosswalks.
■ Decorative paving at key intersections can help unify
the streetscape and aid in wayfinding throughout the
district.
■ Although decorative paving is appropriate for accents
at intersections, the goal for the rest of the sidewalk
treatments in the district should read as a cohesive
system.
Merchandise displayed on the sidewalk should be kept
clear of the public right-of-way.
■ Merchandise such as hanging racks and display
tables that occur outside of the building are not in
character with the district and should be set back
three feet from the storefront entrance.
■ Sidewalk dining should be encouraged, where
appropriate and where an accessible pedestrian route
can be maintained.
■ Dining tables and chairs may be located on sidewalks,
provided a minimum of 4 feet of clearance between
furniture and sidewalk curb.
Example of decorative paving
Example of decorative intersection paving
Example of decorative intersection paving
Design for a Livable Downtown | 17
Example of decorative intersection paving
Sidewalk merchandising allowing for pedestrian through travel
Sidewalk merchandising allowing for pedestrian through travel
Sidewalk temporary signage in sidewalk
Sidewalk dining seating allowing for pedestrian through travel
Sidewalk dining seating allowing for pedestrian through travel
18 | Downtown Walhalla Design Guidelines
Street Furnishings
Several areas of Downtown Walhalla already have
amenities in place that enhance the pedestrian experience.
New furnishings should continue to enhance the area
while working with existing features. Where feasible,
benches, planters, lighting, mail boxes, newspaper racks,
and trash receptacles should be located in a furnishings
zone which maintains a clearly defined pedestrian travel
lane.
All street furniture in the public right-of-way should have
similar materials and finishes.
■ Draw upon local character and materials for street
furniture design.
Street furnishings should be simple in character.
■ Avoid highly ornate designs which could misrepresent
the history of the area.
Temporary street furnishings should be approved by the
City and removed daily.
■ Chains should not be used as part of any temporary
assembly or installation.
Example bicycle rack
Example of bench; to be defined by City of Walhalla
Example tash receptacle
Design for a Livable Downtown | 19
■
Pedestrian Interest
The Downtown District should continue to develop
as a pedestrian oriented environment of ground floor
storefronts. Buildings should relate to pedestrians by
using materials and a human scale compatible with local
historic patterns. The ground floor should also provide
year-round interest, not solely in the peak season.
Develop the ground floor level of a project to encourage
pedestrian activity.
■ Provide a storefront along a primary pedestrian way
when feasible.
■ Provide a protective canopy over the sidewalk similar
to surrounding buildings.
■ Provide architectural detailing that is pedestrian
scaled on first floor facades.
Avoid blank walls or the appearance of a vacant lot.
■ Design all building facades that can be seen by
pedestrians to be visually interesting.
■ Provide repetitive elements, such as windows and
belt courses, to create a rhythm of shadows along
a facade. This helps establish a sense of scale and
interest for pedestrians.
■ Use architectural detailing and material articulation
to create a visually pleasing facade.
Pedestrian-scale storefront for pedestrian interest
Pedestrian-scale storefront for pedestrian interest
20 | Downtown Walhalla Design Guidelines
Building Placement and Orientation
With the exception of small gaps in the building wall
that occur for pedestrian or vehicular alleyways, most
structures in the historic district are built to the full width
of the parcel and to the front lot line. The resulting street
wall pattern should be maintained in new development.
■ Maintain the alignment of buildings at the sidewalk
edge. Locate the front street wall at the sidewalk line
when feasible.
■ If the building has a modern interpretation of a
storefront, it should maintain the feel of the street
wall through use of architectural elements and
features at the street edge.
Street facades should span lot widths.
■ Spaces between buildings should be kept to a
minimum to maintain the street wall and sense of
enclosure at the sidewalk.
■ Exceptions are for access ways to side or rear
entrances.
Lots that have multiple street fronts should be built to
address each street facade.
■ Buildings on corner lots should be built to the
sidewalk on both streets to the extent possible
without interfering with public safety.
■ Buildings on lots which face multiple streets should
be double fronted and built to the sidewalk at both
street fronts.
■ Storefronts are appropriate along all street level
facades of the buildings.
Adapted modern storefront
Streetwall at sidewalk
Streetwall at sidewalk
Design for a Livable Downtown | 21
Floor-to-floor heights should appear to be similar to
those seen historically.
■ First floor heights should be equal to those of the
surrounding buildings.
■ Design windows in new construction to appear
similar in height, location, and scale to those seen
historically.
Maintain the visual building scale of two to four stories
in height.
■ Develop a primary facade that is in scale and
alignment with surrounding historic buildings.
■ Design the lower levels to express the alignment
of elements seen traditionally in the block; where
additional height is allowed, it should be set back
to maintain the visual appearance of scale from the
street level.
Building Mass, Scale, and Height
Patterns of building occur along the street by the
repetition of similarly sized building elements. For
example, uniform facade widths, evenly spaced, create
a rhythm that contributes to the visual continuity. At
a smaller size, the repetition of upper-story windows
across most building fronts also creates a unifying effect.
These features and similar patterns are some of the most
important characteristics of the Downtown Development
Area and should be respected in all new construction.
Traditional spacing patterns created by the repetition
of uniform buildings widths along streets should be
maintained.
■ In most cases, a facade should not exceed established
widths without a clear expression of the historic
pattern.
■ Where a building must exceed this width, use a change
in design features to suggest the traditional building
widths. Changes in facade material, window design,
facade height or decorative details are examples of
techniques that may be considered. These variations
should be expressed through the structure such that
the composition appears to be a collection of smaller
masses.
A new building should incorporate a base, middle, and
a cap.
■ Traditionally, buildings were composed of these three
basic elements. Interpreting this tradition in new
buildings will help reinforce the visual continuity of
the area.
■ This also applies to existing, non-contributing
structures.
A new building should maintain the alignment of
horizontal elements along the block.
■ Align the height of window sills, moldings, and
mid-belt cornices with adjacent and nearby buildings.
■ Where sloped streets occur, a building facade should
step along the street
Uniformity of facade widths
Uniformity of facade widths
22 | Downtown Walhalla Design Guidelines
Placement and orientation diagram, https://www.strongtowns.org/journal/2014/5/7/elements-of-downtown-character.html
Design for a Livable Downtown | 23
Building Materials
Brick masonry and wood frame were the primary
construction methods used in the Downtown
Development Area. These methods should continue in
new construction. More modern materials may also be
considered when they are compatible with those used
historically.
New materials should convey a sense of scale similar to
that seen in historic materials.
■ Appropriately scaled materials contribute to a visually
interesting building facade.
■ Large uninterrupted expanses of featureless materials
are inappropriate.
■ Metal framing can often be similar to that of wood
frame methods and portray a similar scale while also
reflecting modern construction methods.
■ Lap siding should be similar in depth and profile to
historic materials.
Building materials should have similar characteristics as
materials used historically.
■ Unfinished or reflective materials should not be used.
■ Polished stone and mirrored glass should be avoided
as primary materials.
■ Material color schemes should reflect historic
patterns of one muted background color, with one or
two other colors used as accents.
All materials used should be durable and appropriate for
the climate.
■ Any new, alternative material should have a
demonstrated durability in the region and should be
approved by the Planning Department.
Masonry material example
Wood lap siding material example
24 | Downtown Walhalla Design Guidelines
Architectural Character
While it is important that new buildings and alterations
be compatible with the historic context, they should not
imitate older building styles because this confuses the
authenticity of the district. Visual compatibility results
when the design variables in a new building are arranged
to be similar to historic patterns in the area yet in ways
that convey their own time. New construction should
be stylistically distinguishable from historic buildings
while maintaining a similar scale and character-defining
features to historic buildings.
New interpretations of traditional building styles are
appropriate. Infill construction should:
■ Be a balance of new and old design.
■ Draw upon the fundamental similarities among older
buildings in the area without copying them. This will
allow it to reflect its own time and yet be compatible
with its historic neighbors.
■ Avoid literal imitation of older historic styles.
A new building should be compatible with architectural
and scale giving elements traditionally found in the
district.
■ Similar architectural massing as well as window and
door patterns are examples of scale-giving elements.
Modern interpretations of architectural features
historically used are appropriate in new construction.
■ New construction should include architectural
features used historically in the district such as
storefronts and canopies at the street level, but these
should not be direct copies of those seen historically.
Example of compatible modern construction
Example of compatible modern construction
Design for a Livable Downtown | 25
Facade Elements
Storefronts
Storefronts are important character-defining features
of the historic district and should be included on new
buildings in the historic district.
The scale and proportions of a new storefront should be
similar to those seen historically.
■ First floors should be taller than upper floors.
Window patterns in storefronts should be similar to
those seen historically.
■ The area of transparent material should be roughly
equal to what is seen historically.
Alternative designs that are contemporary interpretations
of traditional storefronts may be considered.
■ Modern designs that use traditional elements are
appropriate.
■ The new design should continue to convey the
character of typical storefronts, including the
transparent character of the display window.
Modern storefront
Modern storefront with traditional elements
26 | Downtown Walhalla Design Guidelines
Canopies
Canopies are noteworthy features of the historic district
and have a strong history of use. Their inclusion in the
design of new construction is required by the land use
code.
Building canopies are encouraged where appropriate.
■ Canopies help unify the streetscape as well as provide
refuge from inclement weather.
Mount canopies to accentuate character-defining features
and window openings.
■ Canopies should be mounted to highlight moldings
that may be found above the storefront or within the
storefront.
■ The scale of canopies and their support systems
should be in proportion to the building and not
dominate the facade.
Use colors and materials that are compatible with the
overall design of the building.
■ Canopy materials should reflect the style and
character of the building.
■ Use colors that are compatible with the overall color
scheme of the facade. Solid colors or simple, muted
stripe patterns are appropriate.
Canopies should step down to maintain a consistent
height over the sidewalk.
■ Canopies should not be angled across the building
facade.
■ Some slope is appropriate to allow for run-off of
precipitation.
■ Articulation in awnings and canopies is appropriate
to designate the main building entry.
Projecting horizontal canopies are most appropriate.
■ The canopy should fit the opening of the building.
■ Odd shapes, bullnose awnings, and bubble awnings
are inappropriate on most structures.
■ Internal illumination is inappropriate.
■ Simple shed shapes may be considered in some cases.
Canopy articulating main entry
Simple canopy
Simple canopy with signage
Design for a Livable Downtown | 27
General Notes for Paint and Awning Palettes
These paint palettes are arranged in suggested color combinations , including coordinating awning fabrics. The
schemes are intended to show various alternatives and a variety o f options that can be used. While three colors are
shown in each scheme, it is not necessary to use all three at once. The se schemes are not all-inclusive but rather serve
as representative examples.
Benjamin Moore brand paint and Sunbrella awning fabrics are shown f or reference. Use these colors as a guide in
selecting paint available from local suppliers and dealers.
If darker, solid-colore awnings are selected and they feature a scalloped valance, it is recommended that they be
trimmed in Style #4604-Natural.
28 | Downtown Walhalla Design Guidelines
Design for a Livable Downtown | 29
Windows
A pattern exists along the streets with the repetition of
evenly-spaced, similarly-sized windows. These windows
help to give buildings a sense of human scale. Using
window sizes and proportions that are familiar to the
pedestrian helps them to relate to the overall size of a
building. The alignment and similar scale of windows
reflect a common historic pattern that should be
continued in new development.
Upper-story windows with a vertical emphasis are
required.
■ A typical upper-story window is approximately
twice as tall as it is wide. Upper-story windows
in new construction should relate to the window
proportions seen historically.
Windows should align with others in a block.
■ Windows, lintels, and their trim elements should
align with traditional buildings on the block.
Materials used in and around windows should be similar
in scale and proportion to those used historically.
■ Heavily tinted or reflective glass is inappropriate.
Entries
The repetition of recessed building entries occurring
along the street in the downtown district provides a
rhythm of shadows along the street, which helps establish
a sense of scale and invites pedestrians to enter buildings.
This trend should be continued in new construction.
A building entrance should appear similar to those used
historically.
■ Clearly define the primary entrance.
■ Recess the building entrance.
■ Choose a design similar in scale and overall character
to those seen historically for a contemporary
interpretation of a traditional building entry.
■ Place the primary building entrance at street level.
■ Design entries to have a high degree of transparency.
■ Temporary window treatments, including banners
and signs, should not obscure windows or entries.
Example of proportion of upper-story windows
Example of primary entrance
30 | Downtown Walhalla Design Guidelines
Site Development: Cut and Fill
Site development may require cutting into relatively
steep slopes. While basic engineering concerns are major
issues, the visual impacts of these cuts can be significant.
To the greatest extent possible, cutting-and-filling of
sloping areas should be avoided but, where it must occur,
the visual impacts should be minimized.
■ Minimize cut-and-fill excavation that would alter the
perceived natural topography.
■ Use earth berms or retaining walls to minimize
visual impacts of cuts.
■ Hedges and fences may also be appropriate in some
locations.
■ Simple rock walls may be considered. Exposed
gabions, large, continuous surfaces of smooth raw
concrete and similar structures should be avoided.
Example of planted retaining walls
Example of hedges
Example of sloped area with plantings
Design for a Livable Downtown | 31
Site Retaining Walls
Simple retaining walls are used in some areas where steep
slopes occur. New retaining walls should use natural
materials.
■ Architectural block, with special texturing or color
may be considered where it can be demonstrated that
the result will appear to be in character with the area.
Minimize the perceived scale and mass of a new retaining
wall.
■ A wall that is less than four feet is appropriate and
encouraged.
■ Where the overall retaining height must be greater
than four feet, use a series of terraces with short
walls to maintain the traditional sense of a hillside
where feasible.
■ Consider varying the setback of individual walls to
minimize the perceived overall width of a long wall.
■ Consider varying masonry patterns to provide variety
in large walls where applicable.
Example of gabion wall
Example of stone wall
Example of cinder block wall with patterning
Example of terraced retaining wall
Example of split-faced masonry wall
32 | Downtown Walhalla Design Guidelines
Minimize the visual impacts of trash storage and service
areas.
■ Locate service areas away from major pedestrian
routes; locate them at the rear of a building, off an
alley, when possible.
■ Screen dumpsters from view from the public
rights-of-way.
Mechanical Equipment and Service
Utilities
Utility service boxes, external fire connections,
telecommunication devices, cables, conduits, trash and
recycling storage, satellite dishes, and fans may affect th e
character of an area. These devices should be screened
from public view to avoid negative effects on historic
resources.
Minimize the visual and noise impacts of mechanical
equipment on the public way and surrounding
neighborhood.
■ Screen equipment from view.
■ Do not locate window equipment on a primary
facade.
■ Use low-profile or recessed mechanical units on
rooftops.
■ Locate satellite dishes out of view from public
rights-of-way.
■ Locate equipment away from adjacent residential
properties and/or provide a vertical landscape
or privacy buffer. Additional noise attenuation
measures should be taken if the equipment noise
exceeds acceptable standards as determined by the
Zoning Administrator.
Minimize the visual impacts of utility connections and
service boxes.
■ Locate utility connections and service boxes on
secondary walls when feasible.
Utility connection screened with plantings
Example of mechanical enclosure
Example of trash storage area
Example of utility connection
Chapter 3: Design Guidelines for Parking Facilities
34 | Downtown Walhalla Design Guidelines
Surface Parking
Surface parking should be located in the interior of a
block whenever possible.
■ Do not place surface lots on corner properties as
they are generally more visible than interior lots and
provide a sense of enclosure for intersections.
■ Place the parking to the rear of a building to preserve
the architectural continuity of the street.
Provide a visual buffer where surface lots abut sidewalks.
■ Consider the use of a compatible wall as a screen
near the edge of the lot.
■ Use a combination of trees and shrubs to create a
landscape buffer.
Security and Pedestrian Circulation in
Parking Facilities
Design parking facilities to be accessible to pedestrians.
■ Clearly define walkways with wayfinding signage,
lighting or landscaping.
■ Provide a direct connection between parking
structures and supporting businesses.
■ Plan interior and exterior lighting to assure user
safety.
There are no minimum parking requirements for
commercial or office uses in Downtown Walhalla.
Design Guidelines for Parking Facilities
Utilizing alternative modes of transportation is encouraged in Downtown W alhalla; however, parking is still
necessary. When accommodating parking in the downtown the primary goal is to mi nimize visual impacts.
Planted buffer and fencing at parking lot
Planted buffer at parking lot
Chapter 4: Design Guidelines for Signage
36 | Downtown Walhalla Design Guidelines
Appropriate Sign Types
Sign types vary widely in the Downtown District. The
important principle is that signs do not overwhelm the
architecture of the building. The placement, location
and type of a sign are perhaps the most critical factors
in maintaining the order and integrity of the district.
Consistent placement of signs according to building
type, size, location and even building materials creates
a sense of visual continuity. The use of roof-top signs
of any kind are prohibited. The following sign types are
acceptable in the Downtown Development Area. Please
refer to the Zoning Ordinance for detailed regulations
regarding signage types, sizes, and locations.
Canopy Signs
A canopy sign is a sign attached or applied to the
horizontal face of a canopy. Canopy signs should not
extend below the bottom of the horizontal face or more
than one foot above the horizontal face of the canopy.
A sign located on a canopy face may be appropriate:
■ In areas with high pedestrian use.
■ When other signs would obscure architectural details
of the structure.
Under Canopy Hanging Signs
An under canopy hanging sign is a sign that hangs from
the underside of a canopy or building projection, and
does not employ ground support in any matter. One
under canopy hanging sign is allowed per tenant per
street facade. A sign of this type should be designed
and located in a similar fashion to other under canopy
hanging signs on the same building, and should:
■ Incorporate sign brackets as a decorative or
complementary element of the sign and building
detail.
■ Be located near the business entrance, just above the
door or to the side of it.
Design Guidelines for Signage
A sign typically serves two functions: to attract attention and to conv ey information. All signs should be
consistent with the building’s architecture. All new signs shou ld be developed with the overall context of the
building and of the area in mind. Signs should be constructed in a man ner that does not damage the historic
fabric of the building.
Facade Mounted Signs
A facade mounted sign is a sign that is attached to the
wall or surface of a building, which is parallel to the
supporting surface. When designing and locating a sign
of this type:
■ Place the sign flush with the building facade and
align it with others signs on the building.
■ Place the sign within, rather than forward of, the
fascia or other architectural details of the building.
Decorative moldings and architectural details of the
building should be used to define a sign, by locating
the sign within a panel formed by moldings or
transom panels.
■ Place the sign in a manner that does not obstruct
character-defining features of the building.
Window or Doors Signs
A window or door sign is a sign that is painted on, adhered
to and/or displayed through a window or door with the
intent to be viewed from the outside. When using this
type of signage the following criteria should apply:
■ Window or door signs may occupy 10% of the
storefront glass and are only allowed on the first
floor of a building. All window and door signage in
excess of the allowable 10% of the storefront glass
should be counted against the overall allowed sign
area for that side of the building.
Hanging signs
Design for a Livable Downtown | 37
Hanging sign with temporary sidewalk signage
Sign Composition
The composition of a sign in contrast to a building’s
architectural detail and design are important to
preserving the significance or integrity of an existing
building. When designing and installing a sign the
following should apply:
■ Signs should be subordinate to the overall building
composition.
■ Scale signs to fit with the facade of the building.
■ Locate a sign to emphasize design elements of the
facade itself.
■ Mount signage to fit within existing architectural
features using the shape of the sign to help reinforce
the horizontal lines of moldings and transoms seen
on the building.
■ Calculate the sign area by using simple geometric
shapes that define the sign.
■ Rooftop signs are inappropriate. This includes stand-
alone or painted on signs.
A corporate logo or color scheme maybe incorporated
into signage as long as signs of this nature do not alter or
destroy existing architectural features or details.
■ The Zoning Administrator should determine the
portion of the building that will be recognized as
part of a corporate design, and therefore a sign.
Sign Character
When designing a sign that will be erected in the
Downtown District, consideration should be given to the
proposed materials, colors and details of the sign and the
building on which the sign is to be installed.
Signs should be designed in a manner that doesn’t damage
the historic fabric of the building.
■ Any sign that visually overpowers the building or
obscures significant views or architectural features
is inappropriate.
A simple sign design is preferred.
■ Typefaces that are in keeping with those seen in
historic photos or that are traditionally used are
encouraged. Modern typefaces are inappropriate.
■ Avoid hard-to-read or overly intricate typeface styles.
■ Consider letter and painted signs on blank walls as
they were used historically.
Sign Materials
Hanging sign with facade-mounted
38 | Downtown Walhalla Design Guidelines
A sign’s material should reflect the style of the building to
which it is attached and its period of significance.
■ Use signage materials that are compatible with the
building facade.
■ Signs should be wood, sign-grade foam, or metal.
■ Other materials may be used as long as the material is
durable and does not have a plastic appearance.
■ Signs should be painted and should have a matte
surface finish. The use of vinyl covers or stickers are
inappropriate, except in the instance of window and
door signs.
■ Highly reflective materials should not be used.
Sign Lighting
The sign illumination source should be shielded to
minimize glare. Light intensity should not overpower
the building or street edge. Small and discreet modern
light fittings may provide an unobtrusive alternative to
traditionally styled lamp units.
Use indirect lighting on signage.
■ Direct the lighting at signage from an external,
shielded lamp.
■ Warm lighting, similar to daylight, is appropriate.
■ Strobe lighting is inappropriate.
■ Internal illumination is inappropriate.
■ Halo illumination is inappropriate.
Sign Installation
The installation of a sign is an integral aspect in the
retention of key architectural features and in minimizing
damage to the building.
Avoid damaging or obscuring architectural details or
features when installing signs.
■ Minimize the number of anchor points when feasible.
■ Install signs in a manner that does not create a public
safety hazard.
Sign Color
The use of color in sign design should be assessed in
the context of the building, as well as the area, scale and
form of the sign. Strong primary colors should be used
sparingly and primarily for accent purposes. Sign panels
should avoid areas of white or cream, which visually
detach the sign from the building. Color should be
used to accentuate the sign design and message, and to
integrate the sign with the building.
Use colors for the sign that are generally compatible with
those of the building front.
■ In general, no more than three main colors should
be used, although small amounts of additional accent
colors may be appropriate.
■ Use colors and materials that are compatible with the
overall color scheme of the facade
■ Select colors that offer contrast and legibility.
Example wayfinding and directional signage family
Design for a Livable Downtown | 39
Kiosk signage
Facade-mounted wayfinding signage map
Banner signage
40 | Downtown Walhalla Design Guidelines
General Notes for Signage
In Walhalla, as in many American towns, the visual
distinction between the traditional downtown business
district and outlying general commercial strips has
become blurred. Sign manufacturers and designers have
encouraged businesses downtown to install the type
of large-scale signs used along commercial highways,
where signs need to be larger to attract the attention of
motorists passing at high speeds. Pedestrian-oriented
commercial areas, such as much of downtown Walhalla,
were designed to accommodate shoppers strolling
along sidewalks and motorists driving at slower speeds.
While creativity is strongly encouraged, signs in the
central business district should be designed in a manner
sympathetic to the architectural character of downtown
Walhalla.
Design for a Livable Downtown | 41
42 | Downtown Walhalla Design Guidelines
General Notes for Fonts
Typography is one of the critical elements of sign design,
along with color and iconography. In the context of sign
design, it must complement the sign while remaining
readable. It is difficult to prescribe specific fonts for
utilization due to the wide range of business sign uses.
For example, what is appropriate for a children’s clothing
store will likely prove inappropriate for an attorney’s
office. Therefore, the fonts featured herein are offered as
suggestions that must be considered within the context
of each business and take into account building use, sign
size, purpose (e.g., pedestrian or automotive traveler),
mounting location, and design motif. Please consult the
previous section on signage to see firsthand the broad
range of fonts that can be appropriate.
Design for a Livable Downtown | 43
Current Bail Bonds building
Conceptual image of Bail Bonds building after application of design guidelines
44 | Downtown Walhalla Design Guidelines
Current Alexanders Office Supply building
Conceptual image of Alexanders Office Supply building after application of design guidelines
Example Application of Design Guidelines
Design for a Livable Downtown | 45
Current La Estrella building
Conceptual image of La Estrella building after application of design guidelines
Appendix A: Photographic Inventory of the Downtown
Development Area
Appendix A: Photographic Inventory of
the Downtown Development Area
48 | Downtown Walhalla Design Guidelines
Design for a Livable Downtown | 49
50 | Downtown Walhalla Design Guidelines
Design for a Livable Downtown | 51
52 | Downtown Walhalla Design Guidelines
Design for a Livable Downtown | 53
54 | Downtown Walhalla Design Guidelines
Design for a Livable Downtown | 55
56 | Downtown Walhalla Design Guidelines
Design for a Livable Downtown | 57
58 | Downtown Walhalla Design Guidelines
Design for a Livable Downtown | 59
60 | Downtown Walhalla Design Guidelines
Design for a Livable Downtown | 61
62 | Downtown Walhalla Design Guidelines
Design for a Livable Downtown | 63
64 | Downtown Walhalla Design Guidelines
Design for a Livable Downtown | 65
66 | Downtown Walhalla Design Guidelines
Design for a Livable Downtown | 67
68 | Downtown Walhalla Design Guidelines
Design for a Livable Downtown | 69
70 | Downtown Walhalla Design Guidelines
Design for a Livable Downtown | 71
72 | Downtown Walhalla Design Guidelines
Design for a Livable Downtown | 73
74 | Downtown Walhalla Design Guidelines
Design for a Livable Downtown | 75
76 | Downtown Walhalla Design Guidelines
Design for a Livable Downtown | 77
78 | Downtown Walhalla Design Guidelines
Design for a Livable Downtown | 79
Appendix B: Recommended Landscape Palette
Appendix B: Recommended Landscape Palette
82 | Downtown Walhalla Design Guidelines
Acceptable Tree Species
Tree planting should comply with the following list of
acceptable tree species. The administrator or his/her
designee reserves the right to accept additional species
that are not listed below.
Acceptable Shade Tree Species
Native species are preferred because they are best for our
soils and climate, attract a variety of wildlife, provide
food and shelter for many species, require less care and
watering, thrive with less fertilizer and disease control.
■ Ash, Green* - Fraxinus pennsylvanica
■ Ash, Green Georgia Gem* - Fraxinus pennsylvanica
‘Oconee’
■ Ash, Green Patmore* - Fraxinus pennsylvanica
‘Patmore’
■ Ash, Green Urbanite* - Fraxinus pennsylvanica
‘Urbanite’
■ Ash, White* - Fraxinus americana
■ Blackgum* - Nyssa sylvatica
■ Chinese Pistache - Pistacia chinensis
■ Elm, Allee - Ulmus parvifolia ‘Emer II’
■ Elm, Athena - Ulmus parvifolia ‘Emer I’
■ Elm, Bosque - Ulmus parvifolia ‘UPMTF’
■ Elm, Drake - Ulmus parvifolia ‘Drake Chinese Elm’
■ Elm, Lacebark - Ulmus parvifolia ‘Chinese Lacebark
Elm’
■ Elm, Princeton* - Ulmus americana ‘Princeton’
■ Elm, Slippery * - Ulmus rubra
■ Elm, Winged - Ulmus alata
■ Fort McNair Red Horse Chestnut - Aesculus x carnea
‘Fort McNair’
■ Ginkgo, Male Only - Ginkgo biloba
■ Hackberry* - Celtis occidentalis
■ Kentucky Coffeetree - Gymnocladus dioicus
■ Linden, Littleleaf Greenspire - Tilia cordata
■ Maple, Autumn Blaze - Acer x freemanii ‘Jeffers Red’
■ Maple, Red Autumn Flame* - Acer rubrum Autumn
Flame
■ Maple, Red October Glory* - Acer rubrum October
Glory
■ Maple, Red Sunset * - Acer ruburm ‘Franksred’
■ Maple, Sugar - Acer saccharum ‘Northern Sugar
Maple’
■ Maple, Sugar Green Mountain - Acer saccharum
‘Green Mountain’
■ Maple, Sugar Legacy - Acer saccharum ‘Legacy’
■ Oak, Swamp White - Quercus bicolor
■ Oak, Darlington Laurel - Quercus hemisphaerica
‘Darlington’
■ Oak, Live* - Quercus virginiana
■ Oak, Northern Red* - Quercus rubra
■ Oak, Nuttall - Quercus nuttalli
■ Oak, Overcup* - Quercus lyrata
■ Oak, Pin - Quercus palustris
■ Oak, Sawtooth - Quercus acutissima
■ Oak, Scarlett * - Quercus coccinea
■ Oak, Shumard * - Quercus shumardii
■ Oak, White* - Quercus alba
■ Oak, Willow * - Quercus phellos
■ Oak, Willow Hightower* - Quercus phellos ‘QPSTA’
■ Oak, Willow Wynstar* - Quercus phellos ‘QPMTF’
■ Pistachio, Chinese - Pistachia chinensis
■ Planetree, London Bloodgood - Platanus x acerifolia
‘Bloodgood’
■ Plantetree, London Yarwood - Platanus x acerifolia
‘Yarwood’
■ River Birch* - Betula Nigra
■ Sycamore* - Platanus occidentalis
■ Sourwood* - Oxydendrum arboreum
■ Tulip Poplar* - Liriodendron tulipifera
■ Yellowwood - Cladrastis kentukea
■ Zelkova, Green Vase - Zelkova serrata ‘Green Vase’
■ Zelkova, Myrimar - Zelkova serrata ‘ZSFKF’
■ Zelkova, Village Green - Zelkova serrata ‘Village
Green’
* Denotes Native Species
Acceptable Onamental Or Understory
Street Tree Species
The administrator reserves the right to accept additional
species that are not listed below. To be accepted as an
ornamental or understory tree the tree the plant must be
properly pruned and maintained in a tree like form.
Native species are preferred because they are best for our
soils and climate, attract a variety of wildlife, provide
food and shelter for many species, require less care and
watering, thrive with less fertilizer and disease control.
■ American Hornbeam * - Carpinus caroliniana
■ Cherry, Dreamcatcher - Prunus ‘Dream Catcher’
■ Cherry, Okame - Prunus x ‘Okame’
■ Cherry, Pink Autumn – Prunus subhirtella
‘Autumnalis Rosea’
Design for a Livable Downtown | 83
■ Crape Myrtle - Lagerstroemia indica
■ Dogwood, Flowering* - Cornus florida
■ Dogwood, Kousa - Cornus kousa
■ Dogwood, Pink Flowering* - Cornus florida rubra
■ Fringetree* - Chionanthus virginicus
■ Fringetree, Chinese - Chionanthus retusus
■ Fosters Holly - Ilex x attenuata ‘Fosteri’
■ Burford Holly - Ilex cornuta ‘Burfordii’
■ Holly, Emily Bruner, ‘Tree Form’ - Ilex x’Emily
Bruner’
■ Holly, East Palatka, ‘Tree Form’ - Ilex x attenuate
‘East Palatka’
■ Holly, Foster No. 2, ‘Tree Form’ - Illex x attenuata
‘Foster No. 2’
■ Yaupon Holly* - Ilex vomitoria
■ Magnolia, Saucer - Magnolia x soulangiana
■ Magnolia, Star - Magnolia stellata
■ Sweetbay Magnolia - Magnolia virginiana
■ Maple, Trident - Acer buergeranum
■ Plum, Purpleleaf - Prunus cerasifera
■ Plum, Thundercloud - Prunus cerasifera
‘Thundercloud’
■ Redbud, Eastern* - Cercis canadiensis
■ Redbud, Eastern White * - Cercis canadiensis var.
alba
■ Redbud, ‘Forest Pansy’ * - Cercis canadiensis ‘Forest
Pansy’
■ Redbud, Mexican - Cercis mexicana
■ Redbud, Oklahoma - Cercis reniformis ‘Oklahoma’
■ Redbud, Texas White - Cercis reniformis ‘Texas
White’
■ Smoketree - Cotinus coggygria
■ Snowbell, Japanese - Styrax japonica
■ Witch Hazel* - Hamamelis virginiana
* Denotes Native Species
Acceptable Evergreen Screen/Buffer Tree
Species
The administrator reserves the right to accept additional
species that are not listed below.
Native species are preferred because they are best for our
soils and climate, attract a variety of wildlife, provide
food and shelter for many species, require less care and
watering, thrive with less fertilizer and disease control.
■ Deodar Cedar - Cedrus deodara
■ Italian Cypress - Cupressus sempervirens
■ Eastern Redcedar* - Juniperus Virginiana
■ American Holly (cultivar)* - Ilex Opaca ‘Varied
Cultivars”
■ Southern Magnolia* - Magnolia grandifolia
■ Loblolly Pine* - Pinus Taeda
■ Virginia Pine* - Pinus Virginiana
■ Canadian Hemlock - Tsuga Canadensis
■ Japanese-Cedar - Cryptomeria japonica
■ American Arborvitae - Thuja occidentalis
■ Fosters Holly - Ilex x attenuata ‘Fosteri’
■ Burford Holly - Ilex cornuta ‘Burfordii’
■ Nellie R. Stevens Holly - Ilex x ‘Nellie R. Stevens’
■ Yaupon Holly* - Ilex vomitoria
■ Hollywood Juniper - Junipers chinesis
■ Waxy Leaf Ligustrum - Ligustrum japonicum
■ Chinese Fringe Flower - Loropetalum chinense
■ Magnolia, ‘Little Gem’* - Magnolia grandfloria
■ Star Magnolia - Magnolia stellata
■ Sweetbay Magnolia - Magnolia virginiana
■ Wax Myrtle* - Myrica cerifera
■ Chinese Evergreen Oak - Quercus myrsinifolia
■ Spruce Pine* - Pinus glabra
■ Carolina Cherry Laurel* - Prunus caroliniana
■ Tea Olive - Osmanthus fragrans
■ White Pine - Pinus Stobus
* Denotes Native Species
Source: City of Walhalla website. First collected Oct 24, 2026.