BOA-26-32, 850 Lewis Rd. (County) - Staff Report
City of Sumter · Sumter County · Other
Open the original document More from City of Sumter
Text
Extracted automatically from the original. Tables and formatting may not survive; the original document is authoritative.
Sumter City-County
Zoning Board of Appeals
October 14, 2026
BOA-26-32, 850 Lewis Rd.(County)
The applicant (Kevin Boland) is requesting variances from the
requirements of Sumter County Zoning & Development Standards
Ordinance, as follows: (1) residential accessory building maximum
total size requirements provided for Article 4, Exhibit 8A, and (2)
any other variances required to establish a new 1200 sq. ft.
detached garage/storage building on the property. A variance is
being sought by the applicant to exceed the total combined
maximum size of residential accessory buildings allowed, which is
1,150 sq. ft. based on the acreage of the property. The property is
located at 850 Lewis Rd., is zoned Residential-15 (R-15), and is
represented by TMS# 226-00-01-002.
Sumter City-County
Zoning Board of Appeals
October 14, 2026
BOA-26-32, 850 Lewis Rd. (County)
I. THE REQUEST
Applicant: Kevin Boland
Status of the Applicant: Property Owner
Request: Variance from maximum accessory structure size
County Council District: District 6
Location: 850 Lewis Rd.
Present Use/Zoning: Residence / Large Single-Family Lot Residential (R-15)
Tax Map Reference: 226-00-01-002
II. BACKGROUND
The applicant is requesting variances to allow
for the construction of a +/ - 1,200 sq. ft.
accessory structure where the maximum total
accessory structure area permitted on the
property is 1,150 sq. ft.
The property is located on the west side of
Lewis Rd., south of Club Ln. and is shown in
red on the map on the location map above. The
property consists of 1 parcel (TMS# 226-00-
01-002) that is +/ -0.67-acres in size and is
reflected best on the plat prepared by James D.
Wilson, RLS dated January 31, 2007, recorded in Plat Book: PB2007, Page: 49 at the Sumter
County Register of Deeds.
The maximum allowable square footage for a residential accessory structure is determined by the
size of the lot based on acreage. Because the subject property is +/- 0.67 acres in size, the maximum
permitted accessory structure area is 1,150 sq. ft. The applicant is requesting a variance to allow
an accessory structure totaling approximately 1,200 sq. ft., which exceeds the maximum allowable
size by 50 sq. ft. The applicant is requesting the additional square footage in order to have enough
space to store his boat trailer, enclosed trailer, and other tools and equipment.
Staff notes that there is 1 existing accessory structure that the applicant intends to remove from the
property.
Figure 1: Proposed 30’ x 40 ’ Detached Garage Graphic Provided by Applicant
Figure 2: Proposed location of detached garage
Ordinance Requirements:
Article 4, Exhibit 8A: Maximum Building Footprint Square Footage:
The Request:
The applicant (Kevin Boland) is requesting variances from the maximum allowed accessory structure
size requirements found in Article 4, Exhibit 8A: Maximum Building Footprint Square Footage of
Residential Accessory Buildings Based on Gross Acreage.
III. FOUR PART TEST
In order to grant the requested variance, the request must meet all parts of a State-mandated four-
part test. When reviewing a variance request, the Board may not grant a variance that would do
the following:
• Allow the establishment of a use not otherwise permitted in a zoning district;
• Extend physically a nonconforming use of land;
• Change zoning district boundaries shown on the Sumter City-County Official Zoning Map.
The fact a property may be utilized more profitably should a variance be granted shall not be
considered grounds for approving a variance request. In granting a variance, the Board may attach
to it such conditions regarding location, character, or other features of the proposed building,
structure, or use as the Board may consider advisable to promote the public health, safety, or
general welfare.
Staff Review:
1) There are extraordinary and exceptional conditions pertaining to the particular piece of
property.
Case Facts
1. The property is +/- 0.67-acres in size and has a generally rectangular shape, consistent
with the adjacent parcels on Lewis Rd.
• The applicant states a need for a larger structure in order to store their boat trailer and
enclosed trailer, and other tools and equipment.
• The boat trailer and enclosed trailer are currently placed in the rear yard and are not
housed in a carport or garage.
• The proposed building is prefabricated and reducing it in size by only 50 sq. ft. is likely
not feasible due to the standardized manufacturing process es for prefabricated
structures.
2) These conditions do not generally apply to other property in the vicinity.
Case Facts
• Other properties within the general vicinity are of similar shape and size of the subject
parcel.
• All residential parcels must comply with the accessory structure size standards
applicable to this parcel as established in Article 4 and Article 4, Exhibit 8A.
• The property has enough space to place the proposed accessory structure in compliance
with a 5 ft. setback, even though it is larger than the maximum allowed square footage.
3) Because of these conditions, the application of the ordinance to the particular piece of
property would effectively prohibit or unreasonably restrict the utilization of the property.
Case Facts
• The conditions prevent the applicant from establishing a 1,200 sq. ft. accessory building
on the property that is 50 sq. ft. over the maximum total area permitted.
4) The authorization of a variance will not be of substantial detriment to adjacent property or
to the public good, and the granting of the variance will not harm the character of the
district.
Case Facts
• The accessory structure is proposed to be placed at the rear (northwest corner) of
property.
• The purpose of regulating the size of residential accessory buildings is to ensure
compatibility, preserve the primary residence as the focal point of the property, and
avoid negatively impacting surrounding properties.
• The applicant is proposing a 50 sq. ft. overage in required size based on a prefabricated
building design.
• The existing accessory structure on the property is to be removed.
IV. STAFF RECOMMENDATION
Staff recommends the following approval conditions if the board finds the request meets the
required criteria for approval.
• The existing accessory structure on the property shall be removed prior to permit issuance
for the proposed accessory structure.
V. DRAFT MOTIONS FOR BOA-26-26
1. I move the Zoning Board of Appeals approve BOA-26-32, subject to the findings of fact
and conclusions developed by the BZA and so stated:
[reference specific findings as developed based on facts presented in the staff
report, exhibits, and/or during the public hearing.]
2. I move the Zoning Board of Appeals deny BOA-26-32, subject to the following findings
of fact and conclusions:
[reference specific findings as developed based on facts presented in the staff
report, exhibits, and/or during the public hearing.]
3. I move the Zoning Board of Appeals enter an alternative motion for BOA-26-32.
VI. BOARD OF APPEALS – October 14, 2026
Source: City of Sumter website. First collected Oct 24, 2026.