RecordWell Data

Planning Commission Worksession — Agenda Packet

City of Beaufort · Beaufort County · Planning Commission · meeting of Nov 3, 2025 · Agenda packets

Open the original document More from City of Beaufort

Text

Extracted automatically from the original. Tables and formatting may not survive; the original document is authoritative.

Join from PC, Mac, iPad, or Android: https://us02web.zoom.us/j/81947277559?pwd=doILeAMYOSyRdeaaDyCR9teQF0j04a.1 Passcode: 420074 +13092053325 Webinar ID: 819 4727 7559 CITY OF BEAUFORT PLANNING COMMISSION WORKSESSION AGENDA 1911 Boundary Street, Beaufort, SC 29902 Phone: 843-525-7011 ~ Fax: 843-986-5606 Monday, November 3, 2025, 1:00 P.M. City Hall, Planning Conference Room, 1st Floor – 1911 Boundary Street, Beaufort, SC Statement of Media Notification "In accordance with South Carolina Code of Laws, 1976, Section 30-4-80(d), as amended, all local media was duly notified of the time, date, place and agenda of this meeting. Please note, this meeting will be broadcast via zoom and live-streamed on YouTube. You can view the meeting at the City's page; City Beaufort SC I. Public Comment II. Discussion: o Chapter 4 Building Design and Infill Standards (Meadors 1-2:30 pm) o Chapter 2 Maps and Districts o Chapter 3 Land Use Provisions o Holiday Training Session Dates/Plan III. Adjournment Note: If you have special needs due to a physica l challenge, please call Julie Bachety at (843) 525-7011. SCOTT MARSHALL City Manager CITY OF BEAUFORT Community Development Department 1911 BOUNDARY STREET BEAUFORT, SC 29902 (843) 525-7011 FAX (843) 986-5606 CURT FREESE Community Development Director Date: October 30, 2025 From: Curt Freese, Community Development Director To: PC ISSUE: Revisions Since October Worksession Chapter 2: Revised Lot Diversity: diversity standards are limited to only T-4 N and RMX as per the PC meeting. T- 4 N is located in many transitional areas, but has an urban form required per code, which has been challenging. Adding lot diversity ensures monolithic unconnected design doesn’t proliferate. RMX is commercial and also in more suburban and transitional areas with the same type of issues as T4-N. Requiring a mixed use element sets an urban foundation for such a district. Added the lot diversity requirement to the Chapter 3 table. Chapter 3: T3- Changes: added two and three family as a conditional use in T3-S and rowhomes as a special exception in T3-N per the discussion. Other suggestions include adding townhouses and rowhomes as a Special Exception, or not making any changes to add such higher density uses. Vehicle Services: prohibited boat sales in T5-UC and made Vehicle Service Repair a special exception only. Boat and vehicle sales do not seem appropriate for T-5 UC and Service Repair would be difficult to approve with the design standards and also is not typical in a pedestrian urban district. Bed and Breakfast: changed from Permitted to Special Exception in T4-N. T4-N is located in urban and transitional areas, and such a use seems best approved as a special exception with a public hearing before a board and public notice. Overlay Districts: Staff still needs to work on the TND district. The central issue is how to make the district worthwhile to a developer to utilize. Analysis: The Design Chapter is perhaps the core of the Form Based Code. Staff including Meadors Architecture, both reviewed our code based on practical experience with projects (for Meadors, this includes over 6 SCOTT MARSHALL City Manager CITY OF BEAUFORT Community Development Department 1911 BOUNDARY STREET BEAUFORT, SC 29902 (843) 525-7011 FAX (843) 986-5606 CURT FREESE Community Development Director years of experience in Beaufort) and then began researching other form based codes and ideas in other jurisdictions. Core Purpose and Intent Preserve and require a walkable human-scaled that promote architecture that responds to the Lowcountry climate—using shade, porches, natural ventilation—and reflects regional craftsmanship rather than corporate branding. The idea is to allow innovation but require design standards which ensure simplicity, authenticity, and pedestrian vitality. New buildings must feel like natural extensions of Beaufort’s historic fabric, not corporate architecture from elsewhere. All elevations—front, side, and rear—must be cohesive in scale, detail, material, and color. Buildings must have a clear base, middle, and top (e.g., raised foundation, main body, defined roofline or cornice). Key Design Principles Buildings must follow five foundational rules: 1. Simplicity of Form – Use clean, rectangular volumes. Avoid complex, decorative, or irregular shapes. 2. Human Scale and Proportion – Prioritize vertical, narrow frontages (18–30 ft modules). Windows and elements should be taller than wide. 3. Strong Street Relationship – Main entrances face the public sidewalk. Porches, stoops, and active frontages are required. No parking or vehicles between building and street. 4. Climate Responsiveness – Raised foundations, deep porches (minimum 8 ft), low-pitched roofs, and cross-ventilation are mandatory. 5. Authentic Materials – Wood, fiber-cement, brick, stucco, and standing-seam metal are preferred. Vinyl, EIFS, mirrored glass, and corporate color schemes are prohibited. Building Type Requirements Gas Stations & Convenience Stores The main building must front the street with a porch or arcade. Pump canopies go behind or to the side—never in front. Both the street façade and pump-court side need 40% real transparent glass (clear, unobstructed views at least 3 ft deep into active space). Faux windows, spandrel glass, and back- painted panels do not count. Corporate prototypes are banned; branding is limited to signage. SCOTT MARSHALL City Manager CITY OF BEAUFORT Community Development Department 1911 BOUNDARY STREET BEAUFORT, SC 29902 (843) 525-7011 FAX (843) 986-5606 CURT FREESE Community Development Director Multi-Family Housing Large buildings must read as a collection of individual houses, not a single block. Every street-facing ground-floor unit needs its own direct entry from the sidewalk via stoop or porch—no breezeways allowed. Facades longer than 40 ft require vertical breaks (offsets, porches, roof changes). At least 70% of active frontage should have porches or stoops. Upper floors over 3 stories must step back to preserve street-level scale. Drive-Thru Facilities Drive-thru lanes and windows must be hidden from the street (side or rear only). The building fronts the sidewalk with a pedestrian entrance, porch, and 40% real transparency. No cars pass between building and street. Corporate branding, neon lighting, and boxy prototypes are prohibited. Churches & Institutional Buildings Structures should express civic dignity through simplicity and craft, not size. Use gabled or hipped roofs, deep porches, and tall, operable windows. Main entrances face the street or public green. Parking goes to the side or rear. Steeples and cupolas are allowed if proportional—not monumental. Materials and detailing must match Lowcountry tradition. Materials, Transparency, and Detailing Preferred materials include painted wood siding, fiber-cement, brick, stucco, and standing-seam metal roofing. Trim should be wood or composite. Windows must be vertically proportioned, with clear or lightly tinted glass (minimum 60% light transmittance). Transparent fenestration means real views into active interior space—no fake walls, storage, or opaque backing.Commercial and mixed-use buildings require 40% transparency on pedestrian-facing sides. Churches need at least 25% on street-facing ground levels. Height, Massing, and Context Traditional Beaufort buildings are no taller than 38–40 ft (roughly 3 stories). Taller structures must use step-backs, roof variation, and modular breaks to avoid overwhelming the street. New buildings must not dominate neighbors—streetscape elevations showing adjacent structures are required for review. Corporate and Prototype Architecture Prototype designs are prohibited. Corporate identity cannot dictate form, color, or materials. Limited branding (e.g., logo on sign) is allowed only if the building fully complies with vernacular standards. Climate, Landscape, and Resilience All projects must incorporate shade, breeze, and flood protection: raised foundations, deep overhangs, native plants, and pervious surfaces. Street trees, low hedges, and SCOTT MARSHALL City Manager CITY OF BEAUFORT Community Development Department 1911 BOUNDARY STREET BEAUFORT, SC 29902 (843) 525-7011 FAX (843) 986-5606 CURT FREESE Community Development Director rain gardens are encouraged. Mechanical equipment, dumpsters, and service areas must be screened from public view. Design Conclusion: Projects require local architectural sensitivity, authentic materials, and pedestrian focus. Staff will add some additional guidelines to Townhouses and Single Family homes if this direction is well received. Beaufort, South Carolina, The Beaufort Development Code 4: BUILDING DESIGN AND INFILL STANDARDS Beaufort, South Carolina, The Beaufort Development Code    Created: 2023‐12‐08 08:25:10 [EST] (Supp. No. 1) Page 1 of 56 4: BUILDING DESIGN AND INFILL STANDARDS 4.1: PURPOSE AND INTENT 4.1.1 PURPOSE The purpose of this section is to: A. Protect and enhance Beaufort's unique aesthetic character. B. Support high quality streets and public spaces. C. Encourage architecture that blends harmoniously with the natural surroundings and neighboring development. D. Safeguard property values a nd long-term economic assets. E. Carefully preserve the character of Beaufort's National Historic Landmark District while permitting appropriate growth. 4.1.2 INTENT The standards and guidelines in this section are not meant to stifle innovative design or creativity. Instead, they are intended to serve as the minimum standards and guidelines necessary to ensure that new development and redevelopment meets the purposes described above. 4.2: APPLICABILITY 4.2.1 TERMINOLOGY A. Shall: This section establishes both binding standards and discretionary guidelines. Binding standards are typically signified the word "shall." They are specific and precise standards that are required to be met in the submitted design. B. Should, Encouraged and Discouraged: Discretionary guidelines are typically signified by the words "should," "encouraged," and "discouraged." They are general design objectives that are applied and interpreted by the appropriate Design Review Body in the review of development applications. "Shoulds" are the goal, but the Design Review Body has flexibility as to how they are administered. C. May: Discretionary guidelines with a greater degree of flexibility are signified by the word "may." They are ideal guidelines and a project following these guidelines would result in an outcome that is very compliant with the City's goals and objectives; however, they are not specifically required to be met. 4.2.2 APPLICABILITY A. Applicability: The standards apply to all construction. in: Formatted: Tab stops: 2.24", Left    Created: 2023‐12‐08 08:25:08 [EST] (Supp. No. 1) Page 2 of 56 1. Transect-based Districts: T4, T5. 2. Conventional Districts: RMX, IC. B. Exemptions: Where these standards are exempt, as listed below, this section may still be used as design guidelines for new construction as they outline building practices that are traditional to the Beaufort area. 1. Modification to existing struct ures, unless they require design review as specified in Sections 9.8 and 9.9, are exempt from the requirements of this section. 2. All construction in T3 districts is exempt from this section, except for: a. Carriage Houses (Section 4.5.3). b. 2-3 Unit Houses (Section 4.5.5). c. Developments utilizing any of the Alternative Development Patterns (Section 2.8). d. Lots requesting a variance to subdivide and create one or more lots smaller than the minimum lot size per Section 2.3.1. e. Buildings in subdivisions 15 acres or larger. 3. All construction in LI districts are exempt from all standards except for the provisions in 4.6.4.A, where the structure is visible from a Primary Street - See Street Hierarchy Diagram in Appendix C. 4.2.3 RELATIONSHIP TO HISTORIC DISTRICT STANDARDS A. Applicability: In addition to the standards and guidelines in this article, any development located within the Beaufort Historic District is subject to the standards, guidelines, and procedures established in Section 9.10. B. Conflicts: In the event of a conflict between the requirements of this article and the requirements and guidance provided by the documents listed in 9.10.2.B, the later shall take precedence. 4.2.4 RELATIONSHIP TO LAND USE PROVISIONS A. Applicability: Article 2, and Article 3 (Land Use Provisions) identifiesidentifies lot standards and use allowances by district and establishes additional standards applicable to specific uses. These provisions shall also apply in conjunction with the standards outlined in this article. B. Conflicts: In the event of a conflict between the requirements of this article and the requirements of Article 2, and Article 3, the most stringent requirement, as determined by the Administrator, shall apply. 4.3: CONTEXTUAL DESIGN GUIDELINES 4.3.1 PURPOSE AND APPLICABILITY All buildings possess a number of common elements that combine to express a structure both as an entity and as a part of the larger community. No building is so insulated from its surroundings as to avoid an impact on the surrounding context. Applications that require Major Design Review (Section 9.8) and Certificate of Appropriateness, Major (Section 9.10.2), are subject to the additional contextual design guidelines of this section. Formatted: List 3    Created: 2023‐12‐08 08:25:08 [EST] (Supp. No. 1) Page 3 of 56 These guidelines shall be used by the Design Review Body as applicable, to evaluate the appropriateness of the proposed construction to its immediate context and the character of the broader community. A. Design Guidelines. The following design principles serve as criteria for staff and the Design Review Body for decision-making as they relate to the City of Beaufort’s Lowcountry Vernacular in the review of proposed development and redevelopment throughout the Town. The goal of the design standards is to maintain the traditional small village feel of Beaufort as it continues to grow. The purpose of this section is to: a. Protect and enhance Beaufort’s unique aesthetic character b. Support high quality streets and public spaces c. Encourage architecture that blends harmoniously with the natural surroundings and neighboring development d. Safeguard property values and long-term economic assets e. Carefully preserve the character of Beaufort’s National Historic Landmark District while permitting appropriate growth within and beyond the Historic District. B. Intent. The standards and guidelines in this Section are not meant to stifle innovative design or creativity. Instead, they are intended to serve as the minimum standards and guidelines necessary to ensure that new development and redevelopment meets the purposes described above. Designs should respond to the Lowcountry’s climate, landscape, and cultural heritage, promoting human-scaled, pedestrian-oriented development that complements Beaufort’s established patterns of streets, blocks, and buildings. The use of authentic materials, simple building forms, and balanced proportions is essential to achieving the visual harmony and timeless quality characteristic of Beaufort’s architecture. The intent is also to guide new development in a manner that: a. Strengthens the sense of continuity between historic and new structures through compatible scale, rhythm, and detail; b. Enhances the pedestrian experience and fosters vibrant, active streetscapes; c. Encourages site and building design that responds to the Lowcountry environment—including the use of porches, shade, and natural ventilation; d. Promotes variety within a cohesive visual framework, avoiding repetition or standardized corporate imagery; and e. Ensures that every project contributes positively to Beaufort’s enduring identity as a walkable, gracious, and resilient coastal community. C. Findings. The vernacular architecture of Beaufort embodies the qualities found throughout historic Lowcountry and Atlantic seaboard towns—simple in form, functional in design, and authentic in material expression. These buildings were constructed with practical intent, adapted to the climate, and shaped by local craftsmanship rather than academic or formal architectural styles. Most of Beaufort’s historic structures are modest in scale and composed with balanced proportions, emphasizing porches, shading, and durable materials suited to coastal conditions. While a limited number of formally styled buildings exist, particularly outside the historic district, the city’s defining character derives from its abundance of well-crafted vernacular buildings that reflect restraint and regional logic. Future development should continue this tradition by drawing inspiration from the simplicity, proportion, and detail of Beaufort’s vernacular heritage, ensuring that new construction strengthens the city’s distinctive architectural identity. Formatted: Font: Bold Formatted: No bullets or numbering Formatted: Font: Bold Formatted: No bullets or numbering    Created: 2023‐12‐08 08:25:08 [EST] (Supp. No. 1) Page 4 of 56 4.3.2 SPECIFIC GUIDELINES A. Conformity to Civic Master Plan: The Civic Master Plan provides site-specific guidance for the development of many parcels within the city. The intent of this Code is to facilitate the vision and ensure the visions are permitted. In instances where the Civic Master Plan provides guidance for building and site design standards on a particular parcel, development applications on that parcel should meet the general intent of such guidance to the extent practicable, as determined by the Design Review Body. B. Rhythm of Development on the Street: Monolithic massing that disrupts the predominant building pattern of the neighborhood and corridor is strongly discouraged. Relationship to the Street. Traditionally, structures were placed and arranged so that the most public portion of the building (e.g., the entrance) orients outward toward the public realm (i.e., a street, park, plaza, or private courtyard area connecting to a street). The front of buildings must be arranged to create a strong and discernible connection with the public realm. C. Architectural Theme: All buildings and structures within a proposed development, including canopies, shall utilize a unifying architectural theme and be uniform in character in order to create a harmonious whole. However, it is not to be inferred that buildings must look alike to achieve a harmony of style. The scale of buildings and accessory structures (including canopies) shall be appropriate to the scale of structures located in the surrounding area. Canopies designed as domineering or overpowering architectural features are not allowed. D. Simplicity of Massing and Form. Traditional Lowcountry buildings are characterized by clarity of form and restraint in composition. Historically, structures were built by hand using straightforward methods, which naturally resulted in simple, functional shapes rather than elaborate or decorative massing. This economy of form produced buildings that were both efficient and elegant, reflecting practicality, proportion, and human scale. 1.New construction should continue this tradition by employing simple, well-composed masses, typically organized as one or more rectangular volumes. Complex geometries, excessive articulation, or irregular forms are inconsistent with the Lowcountry vernacular and should be avoided. Each building element should contribute to a coherent overall form that reflects craft, simplicity, and purpose. Formatted: Font: Bold Formatted: Numbered + Level: 1 + Numbering Style: A, B, C, … + Start at: 4 + Alignment: Left + Aligned at: 0.5" + Indent at: 0.75" Formatted: Indent: Left: 0.75"    Created: 2023‐12‐08 08:25:08 [EST] (Supp. No. 1) Page 5 of 56 2. Residential character: Commercial buildings should resemble residential structures, or if larger, draw inspiration from historical vernacular warehouses, barns, and packing sheds. E. Legible Hierarchy and Order of Elements. Traditional Lowcountry buildings express a clear hierarchy—primary forms are emphasized, while secondary elements are simplified. The most important portions of a building receive greater attention to proportion and detail, while supporting components remain subordinate. New buildings should maintain this order through distinct primary, secondary, and tertiary masses, ensuring a coherent composition where each element’s importance is visually legible. F. Harmonious Proportions. Lowcountry buildings are composed with a clear hierarchy that expresses both order and human scale. Primary forms—such as main building volumes or central masses—are vertically oriented and proportioned to feel balanced and approachable. Secondary and connecting elements are simpler, allowing the primary forms to remain legible and grounded in the landscape. This hierarchy of massing, proportion, and detail ensures that buildings maintain a comfortable vertical rhythm and a scale perceptible to pedestrians, reinforcing the clarity and character of traditional Lowcountry architecture. a. Human scale: Prioritize vertical proportions, so that architectural features appear taller than they are wide. This reinforces the human scale of the streetscape, rather than a monolithic or oversized horizontal one. b. Narrow frontages: Like Charleston's single houses, narrow street frontages allow for a greater variety of unique building fronts along the sidewalk, making the pedestrian experience more engaging. c. Mixed-use appearance: Multi-family and mixed-use buildings should maintain the character of large single-family residences. Any commercial elements should be expressed through simple, compatible modifications to the residential form. G. Consistent Arrangement of Elements. Traditional architecture arranges openings, columns, and elements of the building in a manner that is based on practicality, ease of construction, and time efficiency. Window openings must be arranged regularly and symmetrical along a building face. H. Top, Middle, and Base. Vertical elements must be composed of a clearly visible top, middle, and base. These three separate concepts are rooted in classical patterns, provide order, and give articulation to a building. Building elevations must clearly illustrate a visually pronounced first floor or base level, a middle ground consisting of all floors above the base level, and an articulated top consisting of the final floor or top level with defined cornice or sloped roof profile. I. Relationship to the Street. Traditionally, structures were placed and arranged so that the most public portion of the building (e.g., the entrance) orients outward toward the public realm (i.e., a street, park, plaza, or private courtyard area connecting to a street). The front of buildings must be arranged to create a strong and discernible connection with the public realm. J. Relationship to Environs. Lowcountry vernacular architecture responds to and connects with the natural environment and regional climate. Building placement, orientation to the sun, natural light and ventilation, materiality, and shading all lends toward developing a strong sense of character that is unique to Beaufort Lowcountry Vernacular. New construction must incorporate elements that relate well to the natural setting and climate. Formatted: Indent: Left: 0.75", No bullets or numbering Formatted: Numbered + Level: 1 + Numbering Style: A, B, C, … + Start at: 4 + Alignment: Left + Aligned at: 0.5" + Indent at: 0.75"Formatted: Numbered + Level: 1 + Numbering Style: A, B, C, … + Start at: 4 + Alignment: Left + Aligned at: 0.5" + Indent at: 0.75" Formatted: Indent: Left: 0.75" Formatted: Numbered + Level: 2 + Numbering Style: a, b, c, … + Start at: 1 + Alignment: Left + Aligned at: 1" + Indent at: 1.25" Formatted: Numbered + Level: 1 + Numbering Style: A, B, C, … + Start at: 4 + Alignment: Left + Aligned at: 0.5" + Indent at: 0.75"    Created: 2023‐12‐08 08:25:08 [EST] (Supp. No. 1) Page 6 of 56 a. Porches and arcades: Provide shelter for pedestrians using elements like arcades, colonnades, marquees, or awnings. Like traditional piazzas, these features offer shade and protect people from the elements. b. Raised foundations: Lowcountry buildings should incorporate a raised foundation, often of stucco or brick, to protect against flooding and accommodate the low-lying terrain. c. Southern orientation: Buildings should be oriented to take advantage of prevailing breezes and river views, using porches and piazzas to provide shade. d. Low-pitched roofs: Utilize low-pitched rooflines to reduce the amount of heat trapped in the building. In contrast to residential buildings, parapeted roofs may also be appropriate on some commercial structures. K. Materials. In Beaufort, building materials should be chosen for durability in the Lowcountry's humid, coastal climate, while also reflecting the area's historic aesthetic. Beaufort’s architectural standards emphasize using materials that reflect the Lowcountry, with a preference for quality, authenticity, and durability. a. Material Specifics: i. Wood siding: A traditional material in the Lowcountry, wood siding is integral to the authentic look and feel of many historic buildings. 1. Style: Horizontal siding, including shiplap, beaded lap, or beveled profile, and vertical board-and-batten are all appropriate styles. 2. Durability: While it requires regular maintenance in the humid climate, high-quality wood can last a very long time when properly cared for. ii. Fiber-cement siding: This alternative to wood is highly recommended for its performance and authentic look. 1. Durability: It is resistant to moisture, rot, termites, and fire. 2. Maintenance: It is lower-maintenance than wood, with a long warranty. iii. Stucco: Applied over masonry, stucco provides a classic Lowcountry finish. A textured finish can give it a more historic character. iv. Brick: Traditionally, brick was used for walls and foundation piers. 1. Historic aesthetic: "Savannah Grey" or "Charleston Grey" brick, now often reclaimed, was a popular material. New brick should match this color and character. 2. Foundation piers: Brick is an ideal material for the raised foundation piers of Lowcountry commercial buildings. v. Roofing 1. Standing seam metal: This is a hallmark of Lowcountry architecture, serving to reflect sunlight and manage heat. Material options: Typically made from painted steel or galvalume. 2. Architectural shingles: High-quality fiberglass shingles can be used and are typically required to be dark gray or black. 3. Membrane roofs: Another approved roofing option for structures where the roof is concealed behind parapet walls. Formatted: Numbered + Level: 2 + Numbering Style: a, b, c, … + Start at: 1 + Alignment: Left + Aligned at: 1" + Indent at: 1.25" Formatted: Numbered + Level: 1 + Numbering Style: A, B, C, … + Start at: 4 + Alignment: Left + Aligned at: 0.5" + Indent at: 0.75" Formatted: Numbered + Level: 2 + Numbering Style: a, b, c, … + Start at: 1 + Alignment: Left + Aligned at: 1" + Indent at: 1.25" Formatted: Numbered + Level: 3 + Numbering Style: i, ii, iii, … + Start at: 1 + Alignment: Right + Aligned at: 1.63" + Indent at: 1.75" Formatted: Numbered + Level: 4 + Numbering Style: 1, 2, 3, … + Start at: 1 + Alignment: Left + Aligned at: 2" + Indent at: 2.25" Formatted: Numbered + Level: 3 + Numbering Style: i, ii, iii, … + Start at: 1 + Alignment: Right + Aligned at: 1.63" + Indent at: 1.75" Formatted: Numbered + Level: 4 + Numbering Style: 1, 2, 3, … + Start at: 1 + Alignment: Left + Aligned at: 2" + Indent at: 2.25" Formatted: Numbered + Level: 3 + Numbering Style: i, ii, iii, … + Start at: 1 + Alignment: Right + Aligned at: 1.63" + Indent at: 1.75" Formatted: Numbered + Level: 4 + Numbering Style: 1, 2, 3, … + Start at: 1 + Alignment: Left + Aligned at: 2" + Indent at: 2.25" Formatted: Numbered + Level: 3 + Numbering Style: i, ii, iii, … + Start at: 1 + Alignment: Right + Aligned at: 1.63" + Indent at: 1.75" Formatted: Numbered + Level: 4 + Numbering Style: 1, 2, 3, … + Start at: 1 + Alignment: Left + Aligned at: 2" + Indent at: 2.25"    Created: 2023‐12‐08 08:25:08 [EST] (Supp. No. 1) Page 7 of 56 vi. Trim: Use wood, composition board, or fiber-cement board for trim details like cornices, brackets, and soffits. Avoid the use of continuous perforated soffit materials and vinyl. vii. Windows and doors: 1. Frame materials: Acceptable materials include wood, aluminum-clad wood, or fiberglass. 2. Glazing: Glass should be clear and non-reflective. 3. Shutters: Use operational, non-reflective shutters. viii. Columns: Wood, fiberglass, or composite columns are appropriate. They should be sized proportionately to the building. ix. Railings: Wooden square balusters, turned spindles, or wrought iron are suitable for porches and balconies. Composite versions may be acceptable on new construction on case-by-case basis. L. Detailing. Primary building materials were limited to those readily available in the area– predominantly wood and brick. Roofs generally feature a hipped or gabled roof, often with broad eave overhangs and exposed rafter tails or fascia trim. Boxed eaves, when present, feature a traditional pedimented gable or return detail. Roofing materials are historically metal standing seam or 5-V crimp and later shingles. Windows are abundant for light and ventilation. Window shapes and panes are taller than wide. Windows occur as singles, pairs or, in some instances, triples with a single, wide “picture frame” trim. Decorative trim and detailing is generally limited to the pedestrian areas of the building, such as display windows and entry elements, although some simple variations of cornice trim may be found at the eaves and in the gables. Large porches are common at the primary entries, with square wood columns that are often chamfered or simple round Tuscan columns. a. Tactile details at street level: The ground floor of commercial buildings should feature high- quality, durable materials and detailed craftsmanship. This can be achieved by using a different material or a slight setback to define a distinctive "base" for the building. b. Surface articulation: Use architectural features like columns, pilasters, and canopies to divide large wall areas into smaller, visually interesting components, as opposed to a single, flat facade. c. Refined craftsmanship: Echo the tradition of expert craftsmanship found in Beaufort's simpler historic buildings by protecting and celebrating distinctive materials, features, finishes, and construction techniques. M. Vista and View Shed. Lowcountry Vernacular structures are generally framed within their settings, often incorporating large trees and roadways into a visual experience. Where it is reasonably practical, proposed structures shall not impede scenic views from the main road, from existing structures, or from natural settings. Structures must strengthen and maintain vistas and view sheds. N. Relationship to Adjacent Structures. Although maximum site densities and special site requirements defined for particular use districts shall be preserved, proposed structures shall not dominate, in an incompatible manner, an adjacent building, nor in surrounding general development substantially in compliance with this chapter. O. Cohesive Design. Cohesive design elements create harmony through related massing, scale, proportion, detail, materials, color, site planning, and landscaping. a. All elevations of a structure shall be in harmony with one another in terms of scale, proportion, detail, material, and color. The side and rear elevations of buildings shall be as Formatted: Numbered + Level: 3 + Numbering Style: i, ii, iii, … + Start at: 1 + Alignment: Right + Aligned at: 1.63" + Indent at: 1.75" Formatted: Numbered + Level: 4 + Numbering Style: 1, 2, 3, … + Start at: 1 + Alignment: Left + Aligned at: 2" + Indent at: 2.25" Formatted: Numbered + Level: 3 + Numbering Style: i, ii, iii, … + Start at: 1 + Alignment: Right + Aligned at: 1.63" + Indent at: 1.75" Formatted: Numbered + Level: 1 + Numbering Style: A, B, C, … + Start at: 4 + Alignment: Left + Aligned at: 0.5" + Indent at: 0.75" Formatted: Numbered + Level: 2 + Numbering Style: a, b, c, … + Start at: 1 + Alignment: Left + Aligned at: 1" + Indent at: 1.25" Formatted: Numbered + Level: 1 + Numbering Style: A, B, C, … + Start at: 4 + Alignment: Left + Aligned at: 0.5" + Indent at: 0.75" Formatted: Numbered + Level: 2 + Numbering Style: a, b, c, … + Start at: 1 + Alignment: Left + Aligned at: 1" + Indent at: 1.25"    Created: 2023‐12‐08 08:25:08 [EST] (Supp. No. 1) Page 8 of 56 visually attractive as the front elevation. Rooflines and architectural detailing shall present a consistency in quality design. b. All buildings and structures within a proposed development, including canopies, shall utilize a unifying architectural theme and be uniform in character to create a harmonious whole. However, it is not to be inferred that buildings must look alike to achieve a harmony of style. The scale of buildings and accessory structures (including canopies) shall be appropriate to the scale of structures located in the surrounding area. Canopies designed as domineering or overpowering architectural features are not allowed. c. The architecture, landscaping, and building siting must work in concert to create a unified appearance that contributes to the existing/developing streetscape. P. Architectural Compatibility. a. The architectural design and material finish of buildings, signage, gasoline pump canopies, and other necessary structures shall be compatible with one another, and with adjacent and surrounding structures where such structures are substantially in compliance with this section. b. In reviewing a proposed structure, specific considerations shall be given to its compatibility with adjacent structures. c. Proposed structures shall be shown to scale, in a streetscape view with adjacent buildings, by using elevations or, in certain instances, photographs, of adjacent structures. Q. Local Design Quality. Structures that are of symbolic design for reasons of advertising, corporate identity or corporate continuity shall be highly discouraged; however, the Planning Commission or staff may work with applicants to incorporate limited signature design elements into buildings, to allow recognition of certain corporate or signature identity, while still retaining the ability to achieve a project design unique to Beaufort. Similarly, prototype architecture is prohibited; however, the Planning Commission or staff may work with applicants to incorporate limited signature design elements into buildings, to allow recognition of certain corporate or signature identity, while still retaining the ability to achieve a project design unique to Beaufort. The need for a building’s program to be laid out in a specific manner congruent with a company’s typical business model cannot override the need to alter the design to reflect Beaufort’s traditional vernacular architecture. R. Consideration for Contemporary Architectural Treatments. Contemporary architectural treatments shall not be prohibited where it maintains the traditional form, massing, design elements, materials, and adherence to design principles of Beaufort Lowcountry Vernacular, and arranges the components in a new and/or modern way such that the basic nature and form of the traditional architecture is clearly visible and compatible with surrounding structures and sites. Commercial buildings should reflect and incorporate traditional characteristics and patterns with simple modifications made to accommodate emerging market trends and commercial activities. S. Consideration for Taller Buildings. Structures that are excessively wide and tall are not consistent with Beaufort Lowcountry Vernacular tradition. Vernacular structures were generally no taller than 38-40 feet, given the sum of heights of the base, floor-to-floor levels, and roof of a traditional two- story structure. Therefore, modern buildings generally taller than 3 stories and 45 feet should employ traditional design principles to mitigate excessive massing and scale of building elements and relate to traditional form and models. C. Massing and Articulation: Formatted: Numbered + Level: 1 + Numbering Style: A, B, C, … + Start at: 4 + Alignment: Left + Aligned at: 0.5" + Indent at: 0.75" Formatted: Numbered + Level: 2 + Numbering Style: a, b, c, … + Start at: 1 + Alignment: Left + Aligned at: 1" + Indent at: 1.25"Formatted: Numbered + Level: 1 + Numbering Style: A, B, C, … + Start at: 4 + Alignment: Left + Aligned at: 0.5" + Indent at: 0.75" Formatted: Block 1, Indent: Left: 0.33"    Created: 2023‐12‐08 08:25:08 [EST] (Supp. No. 1) Page 9 of 56 1. New construction should complement the massing of neighboring buildings by utilizing roof forms, architectural trim, differentiation of facade planes, and a relationship of solids (siding and walls) to voids (window and door openings) that are consistent with the patterns established in neighboring buildings. 2. When large scale construction is proposed that is not consistent with the predominant building height and lot width of the surrounding area, special attention shall be paid to specific building design elements in order to articulate a building form that is appropriate to the neighborhood context. These include the items listed in the paragraph above, along with siting, setbacks, and facade treatments. 4.4: PRIVATE FRONTAGE TYPES SECTION PLAN PERMITTED ZONING DISTRICT(S) Lot - Private Frontage R.O.W. Public Frontage Lot - Private Frontage R.O.W./ Public Frontage A. Common Yard: This is a planted Frontage, wherein the facade is set back substantially from the frontage line. The front yard created may be fenced or unfenced (see Section 2.5.6 H.). The deep setback provides a buffer from the higher speed thoroughfares. T3 B. Porch: This is a frontage wherein the facade is set back from the frontage line with an attached porch permitted to encroach (see Section 2.5.6). Porches may be constructed in front of the minimum required setback, but shall not extend into the right-of- way. Porches shall have a minimum depth of 8 feet and a minimum width of 25% of the primary facade. Porches may be screened; however, if screened, all architectural expression (columns, railings, pickets, etc.) must occur on the outside of the screen. Porch frontages may be fenced or unfenced (see Section 2.5.6 H.). T3, T4 - 4: BUILDING DESIGN AND INFILL STANDARDS 4.4: PRIVATE FRONTAGE TYPES Beaufort, South Carolina, The Beaufort Development Code    Created: 2023‐12‐08 08:25:08 [EST] (Supp. No. 1) Page 10 of 56 C. Forecourt: This is a frontage wherein a portion of the facade is close to the frontage line and the central portion is set back. Forecourts may be used in residential buildings to provide entry yards and/or shared garden space. Forecourts may be used in commercial and mixed-use buildings to provide areas for outdoor dining, display of merchandise, entries to individual tenants, or vehicular drop-off areas. Where provided, forecourts shall be a minimum of 12 feet in depth and 12 feet in width. This type should be allocated in conjunction with other frontage types. Large trees within the forecourts may overhang the sidewalks. T4, T5, RMX, IC DC. Stoop: This is a frontage wherein the facade is aligned close to the frontage line with the first story elevated from the sidewalk sufficiently to secure privacy for the windows. The entrance is usually an exterior stair and landing with a covered or recessed entry door. This type is recommended for ground- floor residential use. Stoops may be constructed in front of the minimum required setback, but shall not extend into the right-of- way. Stoops shall have a minimum depth and width of 4 feet. Stoops may be shared by 2 attached units. Stoop stairs may run to the front or to the side. T4, T5, RMX, IC ED. Balcony: This is a frontage wherein the facade is aligned close to the frontage line with an attached cantilevered or bracketed balcony(ies) above at least 50% of the facade, including major entries. T4, T5, RMX, IC, LI - 4: BUILDING DESIGN AND INFILL STANDARDS 4.4: PRIVATE FRONTAGE TYPES Beaufort, South Carolina, The Beaufort Development Code    Created: 2023‐12‐08 08:25:08 [EST] (Supp. No. 1) Page 11 of 56 This type is conventional for apartment houses and livework/mixed-use buildings. The balcony shall be no less than 3 feet deep and must be visually supported. French balconies (ones that are flush with the building) may be used, but are not considered balcony frontage, and would need to be combined with another frontage type. FE. Shopfront/Awning: This is a frontage wherein the facade is aligned close to the frontage line with the building entrance at sidewalk grade. This type is conventional for retail use. It has a substantial glazing on the sidewalk level. This frontage may also be used in conjunction with forecourt, Gallery/Colonnade, or balcony frontage types. Where an awning exists, it shall be a minimum of 5 feet deep and 8 feet above the sidewalk. Awnings shall be made of fabric or metal, but high-gloss and plasticized fabrics are prohibited. T4, T5, RMX, IC, LI GF. Gallery/Colonnade: This is a frontage wherein the facade is aligned close to the frontage line with an attached cantilevered shed or a lightweight colonnade overlapping the sidewalk. This type is conventional for retail use. The gallery shall be a minimum of 10 feet wide and may overlap the sidewalk to within 2 feet of the curb. T4, T5, RMX, IC, LI H. Arcade: This is a colonnade supporting habitable space that overlaps the sidewalk, while the facade at sidewalk level remains at or behind the frontage line. This type is conventional for retail use. T4, T5, RMX, IC, LI - 4: BUILDING DESIGN AND INFILL STANDARDS 4.4: PRIVATE FRONTAGE TYPES Beaufort, South Carolina, The Beaufort Development Code    Created: 2023‐12‐08 08:25:08 [EST] (Supp. No. 1) Page 12 of 56 The Arcade shall be a minimum of 12 feet wide and may overlap the sidewalk to within 2 feet of the curb. 4.5: BUILDING TYPES SKETCH PLAN PERMITTED ZONING DISTRICT(S) A. Carriage House: This is an accessory structure that provides small, flexible living spaces adjacent to a main house (a.k.a. Accessory Dwelling Unit [ADU], Granny Flat). It is often used for rental housing, and may be free standing, or located above a garage or parking area. T3, T4, T5, RMX, IC B. Single-Family Detached House: This is the predominant residential building type in Beaufort. This house sits on a private lot and can vary in size from a small cottage to a large mansion. Setbacks and frontage types vary by transect zone. T3, T4 C. 2-3 Unit House: This is a house- form that seamlessly fits into a predominantly single-family neighborhood, but contains multiple dwelling units. The units may be side-by-side, or stacked. They typically have separate entrances off of the street, but may share a common entrance. They are located under one roof and do not have parapets dividing the units. T3, T4, T5, IC D. Rowhome /Townhouse: This is an attached residential building type that is part of a series of other rowhomes with more than 3 units in a row. The combination of 3 or T4-N, T5, RMX, IC Formatted Table - 4: BUILDING DESIGN AND INFILL STANDARDS 4.5: BUILDING TYPES Beaufort, South Carolina, The Beaufort Development Code    Created: 2023‐12‐08 08:25:09 [EST] (Supp. No. 1) Page 13 of 56 fewer units is considered a 2-3 unit building. Rowhomes may have parapet walls dividing the units, or be combined under one roof form. They are elevated above the street a minimum of 3 feet for privacy, and are typically accessed by stoops. They may also utilize the forecourt and porch frontage types. E. Apartment House: This is a larger-scale building (a.k.a. Multi- Family Building) that contains 4 or more dwelling units. They often occupy corner lots, or are located in combination to create their own blocks. The ground floor is raised a minimum of 18 inches for privacy. T4, T5, RMX, IC F. Livework/Mixed-Use: This is a building that buildings contains commercial space, typically at grade, with office or residential living, typically located on the upper level(s). They are typically attached, but may be freestanding structures. The ground floor has a substantial amount of glazing, and often utilizes the shopfront frontage type. T4, T5, RMX, LI, IC G. Liner Building: This is a shallow structure, typically 25-30 feet deep, which is placed close to the street frontage. It is typically used in conjunction with other Liner Buildings to conceal surface or structured parking, or large-scale commercial buildings. These buildings may contain a variety of uses, including ground floor commercial, and upper-level offices or residential. T4, T5, RMX, IC H. Large Footprint Building: This is a building that has a footprint greater than 210,000 square feet. It is a type often used by big-box, national retailers. In the T4 and T5 T4, T5, RMX, IC, LI - 4: BUILDING DESIGN AND INFILL STANDARDS 4.5: BUILDING TYPES Beaufort, South Carolina, The Beaufort Development Code    Created: 2023‐12‐08 08:25:09 [EST] (Supp. No. 1) Page 14 of 56 transect zones, they shall be integrated into the streetscape or screened with Liner Buildings. I. Structured Parking: This is a multi-level parking deck that may take up all or a significant portion of a block. T4, T5, RMX, IC, LI J. Gas/Fuel Station: This is a building type that contains a series of fuel pumps in conjunction with a convenience or retail store. T5, RMX K Churches and Institutional Buildings: Churches and institutional buildings in Beaufort play an essential role in defining the community’s cultural and architectural character. Their design should express permanence, craftsmanship, and civic pride. T-3, T-3 N, T-4, T-4 N, T-4 HN, T-5 UC, T-5 DC, RMX, IC, 4.5.1 GENERAL A. The transect provides a framework for determining where specific types of buildings can be located. This section gives an overview of the most common building types in Beaufort, and where and how they are permitted based on their transect zone. Some building types are permitted in multiple zones, but have different requirements based on their district. In case of a conflict between this section and Article 2, whichever requirement is stricter shall take precedence. B. This section is not intended to limit the variety of buildings or stifle creativity. Other building types may be permitted by the Design Review Body, as specified in Article 9, if the building meets the guidelines and requirements of this Article. C. Local Design Quality. Structures that are of symbolic design for reasons of advertising, corporate identity or corporate continuity shall be highly discouraged; however, the Design Review Body or staff may work with applicants to incorporate limited signature design elements into buildings, to allow recognition of certain corporate or signature identity, while still retaining the ability to achieve a project design unique to the City of Beaufort. Similarly, prototype architecture is prohibited; however, the appropriate Design Review Body or staff may work with applicants to incorporate limited signature design elements into buildings, to allow recognition of certain corporate or signature identity, while still retaining the ability to achieve a project design unique to Beaufort.    Created: 2023‐12‐08 08:25:08 [EST] (Supp. No. 1) Page 15 of 56 4.5.2 APPLICABILITY A. The requirements of the districts, as stated in Article 2, shall apply to all building types, unless a more stringent requirement is listed as part of this section. B. Some of the building types listed have specific uses implied (e.g., Gas/Fuel Station) while others may be used flexibly for multiple uses. 4.5.3 CARRIAGE HOUSE A. Description: This is an Accessory Structure that provides small, flexible living spaces adjacent to a main house (a.k.a. Accessory Dwelling Unit [ADU], Granny Flat). It is often used for rental housing, and may be free standing, or located above a garage or parking area. B. Special Requirements: 1. Infrastructure: The lot shall be served with public water and sewer. 2. Number allowed: 12 per lot, an additional ADU may be allowed as an Special Exception Section 9.13except in T3-S where 1 per lot is permitted. 3. Placement on the Lot: The carriage house shall be located to the rear of the primary structure, or to the side as a secondary option, with the following exceptions: a. Units may be placed at the front of a lot wh ere the front of the primary structure is not the street, and the structure has clearly been designed to take advantage of unique site amenities, such as location on the water. b. Units may be placed in the front of th e lot where the prevailing character of the neighborhood has other similarly-placed units. 4. Frontage Type: No frontage type is prescribed unless the building is close to the street; in which case, appropriate frontage types are: porch, stoop. 5. Maximum Number of Bedrooms: 2. 6. Minimum Size: 240 square feet in total area. 7. Maximum Size: The footprint shall not exceed 50% of the footprint of the primary building, or 1,500 square feet, whichever is smaller. Conversions of existing accessory structures that exceed    Created: 2023‐12‐08 08:25:08 [EST] (Supp. No. 1) Page 16 of 56 this maximum may be permitted if the administrator determines that there is no adverse impact on surrounding property. 8. Compatibility with Primary Structure: Architectural details, including color, siding, roof pitch, window detailing, roofing materials, height, and foundation, shall be compatible with the primary dwelling unit. 9. Parking: 1 parking space per Carriage House is required, and shall be clearly defined. See Section 7.3 for additional parking standards. 10. Timing: The carriage house(s) shall be permitted to be built prior to the primary structure on the lot if the following requirements are met: a. A sketch plan showing the potential build-out, including parking, of the site is required; b. The size(s) must be appropriate to permit a primary structure without exceeding the maximum lot coverage; and c. Materials of the future primary structure must coordinate with the carriage house. 4.5.4 SINGLE FAMILY DETACHED HOUSE A. Description: This is the predominant residential building type in Beaufort. This house sits on a private lot and can vary in size from a small cottage to a large mansion. Setbacks and frontage types vary by Transect Zone. B. Special Requirements: 1. Frontage Types: Common Yard, Porch, Stoop. 2. Historic District: In the Historic District, new construction shall be elevated at least one foot in height above grade to avoid a slab-on-grade foundation type. This height requirement does not apply outside of the Historic District. 3. Street Frontage Architecture: Architectural emphasis from the street through use of a courtyard; columns; or tower element; or a covered porch. 4. Architectural design of dwellings. All dwellings and accessory structures shall provide quality architectural design that takes into consideration building massing and style, roof lines, window and door placement, exterior materials and colors and other architectural features. Fluorescent or intense colors shall not be used on any wall or roof of any dwelling or accessory structure    Created: 2023‐12‐08 08:25:08 [EST] (Supp. No. 1) Page 17 of 56 5. Four Sided Architecture: Side or rear elevations shall not be a solid blank wall with no articulation; structures shall be designed so as to break up long walls by the use of offsets, shadow lines, façade treatments and the architectural theme on the front of the house shall be continued on the sides and rear of the structure to maintain the integrity of design throughout the structure. 6. Corner Lots: Dwellings on corner, end, or double frontage lots shall include architectural features, such as windows and doors, porches and entry features, building materials, and other features that complement the front of the dwelling, along the sides or back of dwellings that face streets, drives, or open space areas. 7. Garages: Garage doors shall not extend across more than 30% of the street facing façade of the primary residential structure. Side loaded garages are allowed a reduced 10’ setback in T3-S districts. 8. Front Yard Landscaping: Front yard landscaping should visually integrate the adjacent natural landscape where applicable with the following standards: i. The entire front yard shall be landscaped, except for that portion covered by a paved driveway. Landscaping shall mean any combination of trees, shrubs, vines, ground cover, turf, natural grass, decorative gravel, stones, decomposed granite, mulch or other hardscape materials. ii. Monoculture and/or plant palettes including five or less species are discouraged. iii. Regionally sourced or manufactured landscape construction materials, such as lumber, mulches, pavers, trees, shrubs, groundcover, and quarried gravel/cobbles/rocks or other hardscape materials, should be utilized where practical. iv. Dwellings should incorporate landscaping features to soften the transition between the street and the dwelling. v. Trees must be planted ten feet away from utility lines extending to the residence. vi. Use of architecturally compatible, decorative material is encouraged for pedestrian walkways vii. Each front yard should have at least one ornamental tree. Front yard trees should be of at least one and one-half-inch caliper in size. Formatted: Indent: First line: 0"    Created: 2023‐12‐08 08:25:08 [EST] (Supp. No. 1) Page 18 of 56 4.5.5 2-3 UNIT HOUSE A. Description: This house-form seamlessly fits into a predominantly single-family neighborhood, but contains multiple dwelling units. The units may be side-by-side, or stacked. They typically have separate entrances off of the street, but may share a common entrance. They are located under one roof and do not have parapets dividing the units. B. Special Requirements: 1. Frontage Types: Common Yard, Porch, Stoop. 2. Parking: Parking must be well defined, located behind the building, and accessed off a side street or rear alley. On-site parking for all vehicles, including boats, must not be in front of the building. No variances to this provision are permitted. 3. Location, Specific to T3-N: A 2-3 unit building is permitted in the following areas: a. On a corner lot; or b. Where alley access is provided; however, no more than 2 per block are permitted. 4. Housing Model Diversity: .For any development containing at least three duplexes or triplexes and not more than five buildings (excluding clubhouses/leasing offices), there shall be at least two distinctly different building designs. For any such development containing more than five separate duplexes or triplexes, there shall be at least three distinctly different building designs. For all developments, there shall be no similar buildings placed next to each other along a street or street-like private drive. Building designs shall be considered similar unless they vary significantly in footprint size and shape. Building designs shall be further distinguished by including unique architectural elevations and unique entrance features, within a coordinated overall theme of roof forms, massing proportions and other characteristics. Such variation among buildings shall not consist solely of different combinations of the same building feature. 5 Street Frontage Architecture: Architectural emphasis from the street through use of a courtyard; columns; or tower element; or a covered porch. 6. Architectural design of dwellings. All dwellings and accessory structures shall provide quality architectural design that takes into consideration building massing and style, roof lines, window and door Formatted: Indent: Left: 0.5" Formatted: Indent: Left: 0.5"    Created: 2023‐12‐08 08:25:08 [EST] (Supp. No. 1) Page 19 of 56 placement, exterior materials and colors and other architectural features. Fluorescent or intense colors shall not be used on any wall or roof of any dwelling or accessory structure. 7. Four Sided Architecture: Side or rear elevations shall not be a solid blank wall with no articulation; structures shall be designed so as to break up long walls by the use of offsets, shadow lines, façade treatments and the architectural theme on the front of the house shall be continued on the sides and rear of the structure to maintain the integrity of design throughout the structure. 8. Elevation: A duplex or Triplex new construction shall be elevated at least eighteen inches in height above grade to avoid a slab-on-grade foundation type 4.5.6 ROWHOME/TOWNHOUSE A. Description: This is an attached residential building type that is part of a series of other rowhomes/townhouses with more than three units in a row. Three or fewer is considered a 2—3 unit building. Rowhomes/Townhouses may have parapet walls dividing the units, or be combined under one roof form. They are elevated above the street a minimum of 3 feet for privacy, and are typically accessed by stoops. They may also utilize the the forecourt and porch frontage types. B. Special Requirements: 1. Frontage Types: Porch, stoop, forecourt. 2. Parking: Parking must be well defined, located behind the building, and accessed off a side street or rear alley. On-site parking for all vehicles, including boats, must not be in front of the building. 3. Specific to T4: a. Rowhomes are not permitted in the Histor ic District, except in the Bladen Street Redevelopment District. b. Rowhomes are not permitted in T4-NA. 4. Housing Model Diversity: For any development containing at least three rows of rowhomes/townhouses (i.e. each row of multiple townhouses/rowhomes is considered a building) and not more than five buildings (excluding clubhouses/leasing offices), there shall be at least two distinctly different building designs. For any such development containing more than five separate rows or townhouse buildings (excluding clubhouses/leasing offices), there shall be at least three distinctly different building designs. For all developments, there shall be no similar buildings placed next to each Formatted: Indent: Left: 0.5" Formatted: Font: Bold    Created: 2023‐12‐08 08:25:08 [EST] (Supp. No. 1) Page 20 of 56 other along a street or street-like private drive. Building designs shall be considered similar unless they vary significantly in footprint size and shape. Building designs shall be further distinguished by including unique architectural elevations and unique entrance features, within a coordinated overall theme of roof forms, massing proportions and other characteristics. Such variation among buildings shall not consist solely of different combinations of the same building feature. 5 Street Frontage Architecture: Architectural emphasis from the street through use of a courtyard; columns; or tower element; or a covered porch. 6. Architectural design of dwellings. All dwellings and accessory structures shall provide quality architectural design that takes into consideration building massing and style, roof lines, window and door placement, exterior materials and colors and other architectural features. Fluorescent or intense colors shall not be used on any wall or roof of any dwelling or accessory structure. 7. Four Sided Architecture: Side or rear elevations shall not be a solid blank wall with no articulation; structures shall be designed so as to break up long walls by the use of offsets, shadow lines, façade treatments and the architectural theme on the front of the house shall be continued on the sides and rear of the structure to maintain the integrity of design throughout the structure 8. Elevation: A duplex or Triplex new construction shall be elevated at least 3 feet in height above grade to avoid a slab-on-grade foundation type construction and for privacy. In areas with natural topography elevation changes, the Design Review Body may allow an exception of 18 inches in elevation. 9.Garages. No street-facing facade shall contain more than four garage fronts. Resident garages or parking that is internal to the block is encouraged. Resident garages or parking that is internal to the development is encouraged. On-street parking should be made available for visitors. a Articulation. At a minimum, a vertical trim detail that subdivides the overall siding pattern shall be provided at intervals not to exceed two internal parking stalls (approximately 20 to 24 feet). b. Rear Walls of Multi-Family Garages. To add visual interest and avoid the effect of a long blank wall with no relation to human size, accessibility needs or internal divisions within the building, the following standards for minimum wall articulation shall apply: (i)Length. Any garage located with its rear wall along the perimeter of a development and within 65 feet of a public right-of-way or the property line of the development site shall not exceed 55 feet in length. A minimum of seven feet of landscaping must be provided between any two such perimeter garages. (ii) Articulation. No rear garage wall that faces a street or adjacent development shall exceed 30 feet in length without including at least one of the following in at least two locations: a. change in wall plane of at least six inches, b. change in material or masonry pattern, c. change in roof plane, d. windows, e. doorways, f. false door or window openings defined by frames, sills and lintels, and/or Formatted: Font: Bold Formatted: Font: Bold Formatted: Font: Bold Formatted: Font: Bold Formatted: Font: Bold Formatted: Font: Bold Formatted: Indent: Left: 0.59"    Created: 2023‐12‐08 08:25:08 [EST] (Supp. No. 1) Page 21 of 56 g.an equivalent vertical element that subdivides the wall into proportions related to human scale and/or the internal divisions within the building. 4.5.7 APARTMENT HOUSE A. Description: This is a larger-scale building (a.k.a. Multi-Family Building) that contains 4 or more dwelling units. They often occupy corner lots, or are located in combination to create their own blocks. The ground floor is raised a minimum of 18" for privacy. B. Special Requirements: 1. Frontage Types: Stoop, Forecourt, Balcony. Porches are not preferred, but may be used in buildings containing 12 units or less if they provide direct access to the unit from the street or sidewalk. 2. Building Entries: In buildings with more than 6 residential units, all ground floor units facing a frontage line shall have individual entrances from that frontage line. Buildings with formal entry courtyards or lobbies are exempt from this requirement. 32. Parking: On-site parking must be located behind the building and accessed off a rear alley. Where parking is required, prioritize tucked/structured parking, rear lots accessed by alleys, and shared parking strategies. On-site surface parking should not front the primary public ROW. 34. Specific to T4: a. In the Historic District , these are limited to 6 dwelling units per building. b. Multi-family dwellings are not permitted in T4-NA. 4. Elevation: New construction shall be elevated at least 3 feet in height above grade to avoid a slab-on-grade foundation type construction and for privacy. In areas with natural topography elevation changes, the Design Review Body may allow an exception of 18 inches in elevation. 5. Lowcountry Vernacular Guidelines — Multi-Family Housing Intent / Design Goals i. Reduce the apparent scale of multi-family buildings so they read as a collection of houses rather than a single large block. Formatted: Indent: Left: 0.5", Hanging: 0.5" Formatted: Font: Bold Formatted: Indent: Left: 0.25", First line: 0.25", No bullets or numbering    Created: 2023‐12‐08 08:25:08 [EST] (Supp. No. 1) Page 22 of 56 ii. Strengthen pedestrian frontage and neighborhood feel: human-scale entrances, porches, stoops, landscaping. iii. Encourage variety in massing, rooflines, and materials to reflect Lowcountry vernacular traditions (porches, gabled roofs, raised floors, wood cladding, simple trim). iv. Require mixed-use on appropriate corridors and guarantee ground-floor activation with direct unit entries from the ROW. v. Respect climate and resilience — designs should favor natural ventilation, porches, shaded facades, and flood-resilient strategies. A. Applicability & Thresholds 1. Applies to all new multi-family developments of 4 or more units in zones within City limits where multi-family is allowed. 2. Applies to mixed-use buildings with residential above or behind ground-floor commercial. 3. For infill sites, guidelines apply at project review stage; for large sites, apply both at building and block (master plan) scale. B. Massing & Scale (mandatory + numeric guidance) Goal: Break large buildings into smaller readable parts (“house-scale” modules). C. House-Module Approach (required): 0. Every building façade visible from a public right-of-way must be expressed as a set of discrete modules that read like individual houses. 1. Module width: prefer 18’–30’ (recommended). Treat longer façades as a composition of modules separated by vertical breaks, offsets, or roof changes. D. Maximum Continuous Facade Length without modulation: 0. No uninterrupted façade shall exceed 40 feet without a vertical modulation (offset, porch, material change, or recess). 1. For façades longer than 80 feet, require at least 2 strong compositional changes (e.g., projecting gable, recessed courtyard, mid-bay break). E. Vertical scale: 0. Where contextual (adjacent single-family and historic blocks), avoid exceeding 3 stories at the street frontage. Where 4 stories are allowed, step back upper floors so street elevation reads as 2–3 stories with a recessed upper story. 1. Floor-to-floor heights should feel domestic: ground floor 10’–12’ (for mixed-use), typical residential floors 9’–10’. F. Roofing and massing relief: 0. Use varied roof forms: front gables, cross gables, low-pitch hip roofs, small dormers. Avoid long, continuous flat parapets unless broken into modules. The use of excessive hips, gables, shed, or parapet roofs with the singular goal of creating complex roof systems is strongly discouraged – the appropriate roof forms mentioned above should be used to create simple roof forms that do not detract from the appearance of the individual modules. 1. Primary roof ridgelines should generally be perpendicular or at shallow angles to the street to emphasize smaller forms. Formatted: Outline numbered + Level: 1 + Numbering Style: A, B, C, … + Start at: 1 + Alignment: Left + Aligned at: 0.5" + Tab after: 0.75" + Indent at: 0.75" Formatted: Numbered + Level: 1 + Numbering Style: 1, 2, 3, … + Start at: 1 + Alignment: Left + Aligned at: 0.75" + Indent at: 1" Formatted: Outline numbered + Level: 1 + Numbering Style: A, B, C, … + Start at: 1 + Alignment: Left + Aligned at: 0.5" + Tab after: 0.75" + Indent at: 0.75" Formatted: Outline numbered + Level: 1 + Numbering Style: A, B, C, … + Start at: 1 + Alignment: Left + Aligned at: 0.5" + Tab after: 0.75" + Indent at: 0.75" Formatted: Outline numbered + Level: 2 + Numbering Style: 1, 2, 3, … + Start at: 1 + Alignment: Left + Aligned at: 1" + Tab after: 1.25" + Indent at: 1.25" Formatted: Outline numbered + Level: 1 + Numbering Style: A, B, C, … + Start at: 1 + Alignment: Left + Aligned at: 0.5" + Tab after: 0.75" + Indent at: 0.75" Formatted: Outline numbered + Level: 2 + Numbering Style: 1, 2, 3, … + Start at: 1 + Alignment: Left + Aligned at: 1" + Tab after: 1.25" + Indent at: 1.25" Formatted: Outline numbered + Level: 1 + Numbering Style: A, B, C, … + Start at: 1 + Alignment: Left + Aligned at: 0.5" + Tab after: 0.75" + Indent at: 0.75" Formatted: Outline numbered + Level: 2 + Numbering Style: 1, 2, 3, … + Start at: 1 + Alignment: Left + Aligned at: 1" + Tab after: 1.25" + Indent at: 1.25" Formatted: Outline numbered + Level: 1 + Numbering Style: A, B, C, … + Start at: 1 + Alignment: Left + Aligned at: 0.5" + Tab after: 0.75" + Indent at: 0.75" Formatted: Outline numbered + Level: 2 + Numbering Style: 1, 2, 3, … + Start at: 1 + Alignment: Left + Aligned at: 1" + Tab after: 1.25" + Indent at: 1.25"    Created: 2023‐12‐08 08:25:08 [EST] (Supp. No. 1) Page 23 of 56 G. Frontage, Entrances & Streetscape (required) Goal: Activate sidewalk, ensure pedestrian access, avoid “breezeway-only” frontage. H. Direct Unit Entries (required): 0. Every ground-floor residential unit that faces a public right-of-way must have a direct individual entry from that ROW (stoop, porch, or front door directly accessible from sidewalk). 1. Unit entry must be via a modest stoop/steps; raised entries (for flood resilience) are allowed but must include a staircase or ramp directly to the public sidewalk (not through a shared breezeway). I. No Breezeway Substitutes (mandatory): 0. Breezeways, internal corridors, or passageways that open to the street do not satisfy the direct entry requirement. J. Porches & Stoops (strongly preferred / required percentage): 0. At least 70% of active ground-floor frontage length (on facades with residential units) should be composed of porches, stoops, or recessed entries (minimum 8’ depth for porches where feasible). 1. Porches must be clearly articulated with roof, columns or posts, and railing consistent with Lowcountry tradition. K. Entrances: 0. Front doors should be visible and readable from the sidewalk. Provide small entry landings (min 5’ x 5’) with path connections to sidewalk. 1. For corner units, provide dual orientation (primary entrance on primary façade; secondary side entry allowed). L. Storefront / Mixed-Use Frontage: 0. Where ground floor is commercial, maintain transparent storefronts with operable windows/doors and canopies; maintain direct residential entries adjacent to commercial frontage (do not force residents through commercial spaces). M. Façade Articulation, Fenestration & Materials Goal: Use simple, durable materials and articulations that read as individual homes. 1. Articulation intervals: i. Provide a minimum of one pronounced vertical element (porch, gable, bay window, or recessed entry) every 18’–30’ of façade. 2. Fenestration / Proportions: i. Windows should be vertically proportioned where possible (e.g., 2:1 height:width) and grouped in patterns that reinforce module rhythm. ii. Provide window trim/headers consistent with Lowcountry tradition (modest cornice, projecting sill, and simple surrounds). 3. Materials palette (encouraged): Formatted: Outline numbered + Level: 1 + Numbering Style: A, B, C, … + Start at: 1 + Alignment: Left + Aligned at: 0.5" + Tab after: 0.75" + Indent at: 0.75" Formatted: Outline numbered + Level: 1 + Numbering Style: A, B, C, … + Start at: 1 + Alignment: Left + Aligned at: 0.5" + Tab after: 0.75" + Indent at: 0.75" Formatted: Outline numbered + Level: 2 + Numbering Style: 1, 2, 3, … + Start at: 1 + Alignment: Left + Aligned at: 1" + Tab after: 1.25" + Indent at: 1.25" Formatted: Outline numbered + Level: 1 + Numbering Style: A, B, C, … + Start at: 1 + Alignment: Left + Aligned at: 0.5" + Tab after: 0.75" + Indent at: 0.75" Formatted: Outline numbered + Level: 2 + Numbering Style: 1, 2, 3, … + Start at: 1 + Alignment: Left + Aligned at: 1" + Tab after: 1.25" + Indent at: 1.25" Commented [MS1]: Just a general comment - I think we should have pictures for some of these items - ask Curt if he wants to include photos? Formatted: Outline numbered + Level: 1 + Numbering Style: A, B, C, … + Start at: 1 + Alignment: Left + Aligned at: 0.5" + Tab after: 0.75" + Indent at: 0.75" Formatted: Outline numbered + Level: 2 + Numbering Style: 1, 2, 3, … + Start at: 1 + Alignment: Left + Aligned at: 1" + Tab after: 1.25" + Indent at: 1.25" Formatted: Outline numbered + Level: 1 + Numbering Style: A, B, C, … + Start at: 1 + Alignment: Left + Aligned at: 0.5" + Tab after: 0.75" + Indent at: 0.75" Formatted: Outline numbered + Level: 2 + Numbering Style: 1, 2, 3, … + Start at: 1 + Alignment: Left + Aligned at: 1" + Tab after: 1.25" + Indent at: 1.25" Formatted: Outline numbered + Level: 1 + Numbering Style: A, B, C, … + Start at: 1 + Alignment: Left + Aligned at: 0.5" + Tab after: 0.75" + Indent at: 0.75" Formatted: Outline numbered + Level: 2 + Numbering Style: 1, 2, 3, … + Start at: 1 + Alignment: Left + Aligned at: 1" + Tab after: 1.25" + Indent at: 1.25" Formatted: Outline numbered + Level: 1 + Numbering Style: A, B, C, … + Start at: 1 + Alignment: Left + Aligned at: 0.5" + Tab after: 0.75" + Indent at: 0.75" Formatted: Indent: Left: 1.5", No bullets or numbering    Created: 2023‐12‐08 08:25:08 [EST] (Supp. No. 1) Page 24 of 56 i. Primary: painted horizontal wood clapboard, board-and-batten, smooth fiber cement lap, or brick on limited portions. ii. Secondary: standing seam or metal roofs, wood porch columns, porch ceilings painted traditional colors is encouraged but not required. iii. Discourage large expanses of blank concrete, mirrored glass, or highly reflective metal panels. 4. Color & texture: i. Use soft, muted palettes (pastels, neutrals, weathered wood tones) with a maximum of three primary colors per façade. ii. For all developments, there shall be no more than two similarly colored structures placed next to each other along a street or major walkway. N. Roofs, Porches, & Shade 1. Porch dimensioning: Minimum 8’ deep for usable porches. 2. Overhangs & eaves: Provide eaves/overhangs to shade windows (min 12” eaves recommended where not constrained). 3. Dormers & Breaks: Use dormers and small gables to avoid continuous rooflines; limit eave heights to break mass. 4. Awnings: Metal awnings may be permitted over individual entrances. 5. Shutters: Bahama shutters are discouraged. Any shutters in either a transect or conventional zoning district are to be operable. The use/language of shutters should be consistent on all facades and floors (i.e. do not only put shutters on third floor windows only). O. Setbacks, Site Layout & Neighborhood Pattern 1. Setbacks & rhythm: i. Encourage front setback consistent with adjacent single-family blocks where possible to create a continuous street wall of porches and stoops. ii. For larger buildings, create a rhythm of small front yards and porches (e.g., alternating 5’–12’ front setback with low planting). 2. Parking & access: i. Locate parking to the rear or sides; minimize curb cuts on primary streets. ii. Require a minimum of 50% of parking to be tucked under/structured or screened behind buildings for mixed-use corridors. On-street parking is encouraged to support activation. 3. Alleys & service: i. Service areas, loading, and garbage must be placed off alleyways or internal courtyards, not on primary façade. 4. Courtyards & green space: i. Encourage small, semi-public courtyard spaces (cottage courts) that provide social spaces while maintaining street frontage. P. Program & Unit Types (diversity) Formatted: Outline numbered + Level: 1 + Numbering Style: A, B, C, … + Start at: 1 + Alignment: Left + Aligned at: 0.5" + Tab after: 0.75" + Indent at: 0.75" Formatted: Font: Bold Formatted: Outline numbered + Level: 1 + Numbering Style: A, B, C, … + Start at: 1 + Alignment: Left + Aligned at: 0.5" + Tab after: 0.75" + Indent at: 0.75" Formatted: Outline numbered + Level: 1 + Numbering Style: A, B, C, … + Start at: 1 + Alignment: Left + Aligned at: 0.5" + Tab after: 0.75" + Indent at: 0.75"    Created: 2023‐12‐08 08:25:08 [EST] (Supp. No. 1) Page 25 of 56 1. Mix of unit types: 1. At least 30% of units should be 1-bedroom or smaller and 25% 3+ bedrooms to support household diversity. 2. Ground-floor unit requirement: 1. Ground-floor units facing the street must be designed as townhouse-style units (direct entries, small private stoop/porch, transitional front yard or fence). 3. Accessory frontages: 1. Allow small home-office entry conditions, live/work units, and flex spaces on ground floor where fronting main streets. Q. Mixed-Use Specifics 1. Ground-floor active uses are required on designated mixed-use corridors. Where commercial is required, maintain residential direct entries adjacent or integrated — ground-floor residential entries cannot be completely separated from commercial frontage by service or parking. 2. Commercial depth: Provide minimum 25’ depth for retail spaces to ensure usable storefronts. 3. Service & deliveries: Locate rear service access only. R. Climate Resilience & Elevation 1. Flood resilience: For flood-prone blocks, allow raised first floors but require design treatments (stairs, ramps, porches) that preserve direct public access. Use economy of stairs and integrated landings so entries remain dignified and active. 2. Materials: At ground level use flood-compatible materials (masonry, fiber-cement, pressure- treated wood) where applicable. 3. Natural ventilation & shading: Encourage through-building breezeways for cross ventilation (but not as the primary pedestrian frontage) and deep porches to reduce solar load. S. Open Space, Landscaping & Fencing 1. Street trees: Plant a continuous tree canopy along the sidewalk with species that are compatible with coastal conditions. The tree lawn for planting shall be 6 and half feet in depth in all areas. 2. Low hedges & picket fences: Use low plantings and 3’–4’ picket or metal fences to reinforce front porches and private spaces while maintaining openness. Tall privacy fences on the primary frontage are discouraged. T Stormwater: Use rain gardens and bioretention in front or side yard pockets, integrated into the streetscape design. U. Design Exceptions & Administrative Relief 1.Exceptions (e.g., for very constrained sites or required flood elevations) may be granted if the developer provides compensating design moves that improve pedestrian engagement, such as extra deep porches, increased modulation, or enhanced landscaping. Exceptions must be approved by the Planning Commission with clear public benefits. V..Garages. No street-facing facade shall contain more than four garage fronts. Resident garages or parking that is internal to the block is encouraged. Resident garages or parking that is internal to the development is encouraged. On-street parking should be made available for visitors. Formatted: Outline numbered + Level: 1 + Numbering Style: A, B, C, … + Start at: 1 + Alignment: Left + Aligned at: 0.5" + Tab after: 0.75" + Indent at: 0.75"Formatted: Outline numbered + Level: 1 + Numbering Style: A, B, C, … + Start at: 1 + Alignment: Left + Aligned at: 0.5" + Tab after: 0.75" + Indent at: 0.75" Formatted: Outline numbered + Level: 1 + Numbering Style: A, B, C, … + Start at: 1 + Alignment: Left + Aligned at: 0.5" + Tab after: 0.75" + Indent at: 0.75" Formatted Formatted: Indent: Left: 0.5", No bullets or numbering Formatted: Font: Not Bold Formatted: Indent: Left: 1", No bullets or numbering Formatted: Font: Bold Formatted: Indent: First line: 0"    Created: 2023‐12‐08 08:25:08 [EST] (Supp. No. 1) Page 26 of 56 1. Articulation. At a minimum, a vertical trim detail that subdivides the overall siding pattern shall be provided at intervals not to exceed two internal parking stalls (approximately 20 to 24 feet). 2. Rear Walls of Multi-Family Garages. To add visual interest and avoid the effect of a long blank wall with no relation to human size, accessibility needs or internal divisions within the building, the following standards for minimum wall articulation shall apply: (i)Length. Any garage located with its rear wall along the perimeter of a development and within 65 feet of a public right-of-way or the property line of the development site shall not exceed 55 feet in length. A minimum of seven feet of landscaping must be provided between any two such perimeter garages. (ii) Articulation. No rear garage wall that faces a street or adjacent development shall exceed 30 feet in length without including at least one of the following in at least two locations: a. change in wall plane of at least six inches, b. change in material or masonry pattern, c. change in roof plane, d. windows, e. doorways, f. false door or window openings defined by frames, sills and lintels, and/or g.an equivalent vertical element that subdivides the wall into proportions related to human scale and/or the internal divisions within the building. (Ord. No. O-21-19 , 12-10-2019) 4.5.8 LIVEWORK/MIXED-USE A. Description: This is a building that buildings contains commercial space, typically at grade, with office or residential living, typically located on the upper level(s). They are typically attached, but may be freestanding structures. The ground floor has a substantial amount of glazing, and often utilizes the shopfront frontage type. Formatted: Indent: Left: 1", First line: 0" Formatted: Indent: First line: 0.5" Formatted: Indent: Left: 1", First line: 0" Formatted: Indent: Left: 0.5", First line: 0"    Created: 2023‐12‐08 08:25:09 [EST] (Supp. No. 1) Page 27 of 56 B. Special Requirements: 1. Frontage Types: Forecourt, bBalcony, Shopfront/Awning, Gallery/Colonnade, Arcade. 2. Parking: Parking must be located behind the building, and accessed off a rear alley. 3. Specific to T4-N and T4-NA: When no retail frontage overlay exists, the ground floor is limited to office, artisan and trail-related uses only. 4. Specific to LI: Drive-thru facilities are prohibited. 5.Ground-floor active uses are required on designated mixed-use corridors. Where commercial is required, maintain residential direct entries adjacent or integrated — ground-floor residential entries cannot be completely separated from commercial frontage by service or parking. 6. Commercial depth: Provide minimum 25’ depth for retail spaces to ensure usable storefronts. 7.Service & deliveries: Locate rear service access only. 8. Wall articulation. a. Walls shall not have an uninterrupted length exceeding 35 feet. Pilasters, texture transitions, windows, stepping of the wall plane, and/or landscaping accomplishing the same effect are required to satisfy this standard b. Blank wall or service area treatment of side and/or rear elevations visible from to the general public is not allowed unless the Codes Administrator or Design Review Body determines there are adequate building or landscape features to conceal the view of the blank wall. c. All exterior elevations shall maintain the integrity of the adjacent dwellings architectural character and detailing. d. Continuous cornice lines or eaves are encouraged between adjacent buildings. e. Buildings with flat roofs shall provide a parapet with an articulated cornice. 6.Facade treatment. The architectural treatment of the front facade shall be continued, in its major features, around all visibly exposed sides of a building visible from adjacent residential and commercial zoned districts. Blank walls at side and/or rear elevations visible to the general public are prohibited adjacent to any residential or commercial zoned district. 9.Windows. Windows shall be vertically proportioned wherever possible and follow fenestration/transparency requirements found in this article. Formatted: Indent: Left: 0.66", No bullets or numbering Formatted: No bullets or numbering Formatted: Font: Bold Formatted: Indent: Left: 0.66"    Created: 2023‐12‐08 08:25:09 [EST] (Supp. No. 1) Page 28 of 56 4.5.9 LINER BUILDING A. Description: This is a shallow structure, typically 25—30 fe et deep, which is placed close to the street frontage. It is typically used in conjunction with other Liner Buildings to conceal surface or structured parking, or large-scale commercial buildings. These buildings may contain a variety of uses, including ground floor commercial, and upper-level offices or residential. B. Special Requirements: 1. Frontage Types: Balcony, Shopfront/Awning, Gallery/Colonnade, Arcade. 2. Frontage Build-Out: 75% minimum. 3. Height: The minimum height for Liner Buildings is 16 feet. 1 storyies; however, when attached to another structure, it must be tall enough to conceal the building it is screening. Where Liner Buildings conceal a parking structure, the Liner Building shall be a minimum of 1 story; however it is preferred that it be built to such a height that the structure cannot be seen from the right-of- way. 4. Connection: Liner Buildings may either be detached from, or attached to the building they are lining. 5. Depth: Detached Line Buildings shall a 25’ minimum depth: Attached Buildings, shall have a 12 foot minimum depth, or shall present a unique design façade differentiating it from the building they are lining, which shall be approved by the approved Design Review Body 6. Required in RMX. Attached or detached liner buildings shall be required in the RMX zoning district. 7. Wall articulation. a. Walls shall not have an uninterrupted length exceeding 35 feet. Pilasters, texture transitions, windows, stepping of the wall plane, and/or landscaping accomplishing the same effect are required to satisfy this standard b. Blank wall or service area treatment of side and/or rear elevations visible from to the general public is not allowed unless the Codes Administrator or Design Review Body determines there are adequate building or landscape features to conceal the view of the blank wall. Formatted: Indent: First line: 0"    Created: 2023‐12‐08 08:25:09 [EST] (Supp. No. 1) Page 29 of 56 c. All exterior elevations shall maintain the integrity of the adjacent dwellings architectural character and detailing. d. Continuous cornice lines or eaves are encouraged between adjacent buildings. e. Buildings with flat roofs shall provide a parapet with an articulated cornice. 8. Facade treatment. The architectural treatment of the front facade shall be continued, in its major features, around all visibly exposed sides of a building visible from adjacent residential and commercial zoned districts. Blank walls at side and/or rear elevations visible to the general public are prohibited adjacent to any residential or commercial zoned district. 9.Windows. Windows shall be vertically proportioned wherever possible and follow fenestration/transparency requirements found in this article. 10. Pedestrian Activation: For liner buildings under 2 stories in height, the façade facing the primary frontage should be activated for pedestrians to include not limited to an activated plaza or outdoor patio 24’ in depth. Formatted: Indent: Left: 0.5" Formatted: Indent: Left: 0.5"    Created: 2023‐12‐08 08:25:09 [EST] (Supp. No. 1) Page 30 of 56 4.5.10 LARGE FOOTPRINT BUILDING A. Description: This is a building that has a footprint greater than 210,000 square feet. It is a type often used by big-box, national retailers. In the T4 and T5 transect zones, they shall be integrated into the streetscape or screened with Liner Buildings (see Section 4.5.9). B. Special Requirements: 1. Frontage Types: Shopfront/Awning, Gallery/Colonnade, Arcade — Balconies may be used if there is true habitable space on the upper floor(s). 2. Liner Buildings: Liner Buildings (Section 4.5.9) are required in the RMX, T4 and T5 districts between the Large Footprint Building and the Primary Street frontage. They may be used in other districts to fulfill the requirements of this Code, such as height, entrances on the street, and parking location. a. Exceptions: When a Large Footprint building provides an entry on the primary street frontage, and a minimum of 40% clear and unobstructed glazing along that street, liners are not required. 3. Height: Buildings may be 1 story in height on the interior of the block, but should be at least 2 stories in height along all Primary Street frontages (see Street Hierarchy Diagram in Appendix C). This may be accomplished with multi-story buildings, higher ceiling heights, parapets, and/or separate Liner Buildings. See Section 2.6.3 for more details on two-story building requirements. 4. Entrances: See Section 2.5.1 D. 5. Location: In the Historic District, except along Boundary Street, these are permitted by special exception only. 6. Wall articulation. a. Walls shall not have an uninterrupted length exceeding 35 feet. Pilasters, texture transitions, windows, stepping of the wall plane, and/or landscaping accomplishing the same effect are required to satisfy this standard b. Blank wall or service area treatment of side and/or rear elevations visible from to the general public is not allowed unless the Codes Administrator or Design Review Body determines there are adequate building or landscape features to conceal the view of the blank wall. Formatted: Indent: Hanging: 0.33"    Created: 2023‐12‐08 08:25:09 [EST] (Supp. No. 1) Page 31 of 56 c. All exterior elevations shall maintain the integrity of the adjacent dwellings architectural character and detailing. d. Continuous cornice lines or eaves are encouraged between adjacent buildings. e. Buildings with flat roofs shall provide a parapet with an articulated cornice. 7. Facade treatment. The architectural treatment of the front facade shall be continued, in its major features, around all visibly exposed sides of a building visible from adjacent residential and commercial zoned districts. Blank walls at side and/or rear elevations visible to the general public are prohibited adjacent to any residential or commercial zoned district. 8. Windows. Windows shall be vertically proportioned wherever possible and follow fenestration/transparency requirements found in this article. 96. Size: Building footprints shall not be larger than a single block. Floor area of buildings shall not cantilever over public rights-of-way. 107. Parking Location: a. Specific to T4 and T5: A minimum of 75% of all parking shall be located behind the primary building or a Liner Building. b. All other districts: The majority of the parking spaces shall be located to the side or rear of the building, or behind a Liner Building.    Created: 2023‐12‐08 08:25:09 [EST] (Supp. No. 1) Page 32 of 56 4.5.11 STRUCTURED PARKING A. Description: This is a multi-level parking deck that may take up all or a significant portion of a block. B. Applicability: These standards apply to all above-ground parking structures that front a public street or right-of-way. C. General Requirements: 1. Screening Required: Where an above-ground parking structure fronts a public street, the ground level shall be screened in such a way that cars are not visible from the street. 2. Materials: Parking structure facades along pedestrian-oriented streets or primary pedestrian paths of travel shall be treated with high-quality materials, such as louvers, landscaped trellises, and/or crafted ornamental metal screens, to visually screen cars. The proportion should be broken down into bays that reflect the surrounding context. 3. Entries: Pedestrian entries into the parking structure shall be clearly visible from the primary pedestrian paths of travel. 4. Bicycle Parking: Parking structures shall provide bicycle parking within the structure. It shall be located on the level closest to the street and/or a primary building entrance. 5. Liner Buildings: If liners exist, they should be designed according to the standards set out in Subsection E. below. D. Height: Each above-ground level counts as 75% of a story regardless of its relationship to habitable stories. 1. Specific to T5-DC: The maximum height at the property line shall not exceed 35 feet to the top of the parapet.    Created: 2023‐12‐08 08:25:09 [EST] (Supp. No. 1) Page 33 of 56 E. Special Requirements Specific to Transect Zones: 1. Disposition: Parking structures shall meet the required building setbacks except where Liner Buildings are required. In that case, parking structures should be set back from the property lines of the adjacent Primary Street(s) a minimum of 25 feet to reserve room for Liner Buildings between parking structures and the lot frontage— see Street Hierarchy Diagram in Appendix C for Primary and Secondary streets. 2. Frontage Types: Shopfront/Awning, Gallery/Colonnade, Arcade — Balconies may be used if there is true habitable space on the upper floor(s). 3. Liner Buildings: a. Liner Buildings (Section 4.5.9) are required in the T4 and T5 districts along Primary street frontage(s). Where parking structures face more than 1 street, requirements for Liner Buildings at secondary frontages are at the discretion of the Design Review Body. They may be used in other districts to fulfill the requirements of this Code, such as height and parking location. b. Exceptions to this requirement may be granted when lot width or depth is less than 140 feet. Where no Liner Buildings exist, along pedestrian-oriented streets, standards in Section 4.5.11 C.1. shall apply. c. Liner Buildings may be constructed concurrently with the parking garage, or space may be reserved for their construction in the future.    Created: 2023‐12‐08 08:25:09 [EST] (Supp. No. 1) Page 34 of 56 4.5.12 GAS/FUEL STATIONS AND CAR WASHES A. Description: This building type contains a series of fuel pumps in conjunction with a convenience or retail store. B. Building and Fueling Station Requirements: 1. Specific to T5-UC: a. The number of pumps shall be limited to 3 — a maximum of six fueling positions — in the Historic District and 6 pumps elsewhere. b. The fueling stations shall be located behind the convenience store or a Liner Building. Outside of the Historic District, the fueling stations may be located to the side of the convenience store or Liner Building with the following provisions: i. The building shall be located on a corner. ii. The pumps shall be set back a minimum of 10 feet from the front line of the building. iii. The short side of the pumps shall be pa rallel to the Primary Street — see Street Hierarchy Diagram in Appendix C. iv. The frontage build-out percentage shall be met by the convenience store and/or Liner Building. v. Fueling stations shall not be located between the building and the adjacent street. c. One or more pedestrian entries shall be located along the Primary Street frontage. 2. Specific to RMX and LI: a. The primary building should be at least ⅔ as long (measured parallel to the street) as the distance along the longest line of pumps — see the following diagram.    Created: 2023‐12‐08 08:25:09 [EST] (Supp. No. 1) Page 35 of 56 b. The pumps should be located to the side or rear of the building where possible. They shall not be located between the building and the adjacent primary street. In cases where the pumps are located to the side of the building, the pumps, including the canopy, shall not project further toward the street than the front line of the building. c. Corners: On corner sites, significant architectural features, such as buildings or structures, should be provided at the corner. 3. Kiosks: Kiosk-type fuel stations, where a structure sits within the pump canopy, are not permitted unless they are located behind a Liner Building. 4. Existing Facilities: When pumps are proposed at existing facilities that do not meet these design standards for gas stations, a decorative wall not less than 3 feet in height shall be required along any side of the property adjoining a street. City of Beaufort: Lowcountry Vernacular Design Guidelines — Drive-Thru Facilities A. Purpose & Intent Drive-thru facilities shall be designed to contribute to Beaufort’s traditional Lowcountry character, reinforcing pedestrian-oriented corridors and mixed-use neighborhoods. The intent is to: 1. Eliminate corporate or standardized prototypes inconsistent with Beaufort’s architectural identity. 2. Maintain street presence and human scale through proportion, transparency, and detailing. 3. Ensure safe and functional circulation for vehicles without compromising pedestrian priority or architectural quality. B. Site Planning & Orientation 1. Street Relationship: a. Buildings must front the primary street, with a pedestrian entry oriented directly toward the sidewalk or public right-of-way. b. Automobiles shall not pass between the building and the street. c. Outdoor seating, small plazas, or shaded porches are encouraged to activate the street frontage. Formatted: Numbered + Level: 1 + Numbering Style: A, B, C, … + Start at: 1 + Alignment: Left + Aligned at: 0.25" + Indent at: 0.5" Formatted: Outline numbered + Level: 3 + Numbering Style: 1, 2, 3, … + Start at: 1 + Alignment: Left + Aligned at: 1.25" + Tab after: 1.5" + Indent at: 1.5" Formatted: Outline numbered + Level: 2 + Numbering Style: 1, 2, 3, … + Start at: 1 + Alignment: Left + Aligned at: 0.75" + Tab after: 1" + Indent at: 1" Formatted: Outline numbered + Level: 1 + Numbering Style: A, B, C, … + Start at: 1 + Alignment: Left + Aligned at: 0.25" + Tab after: 0.5" + Indent at: 0.5"    Created: 2023‐12‐08 08:25:09 [EST] (Supp. No. 1) Page 36 of 56 d. The bay door(s) to the garage or car wash bay(s) shall not be visible from the Primary Street frontage. e. For a stand-alone car wash not associated with a fuel station, the opening of the bay door shall either face away from the Primary Street or be screened from the street with a Liner Building (Section 4.5.9). 2. Drive-Thru Location: a. Drive-thru lanes must be located to the side or rear of the building. b. Circulation around all four sides of the building is prohibited. c. Drive-thru windows and canopies shall be concealed from direct view of the street through architectural placement, fencing, or landscaping. 3. Stacking & Queuing: a. Queuing lanes must be designed to minimize visual impact from public streets and adjacent properties. b. Incorporate landscape buffers, low masonry walls, or trellises consistent with the building architecture. c. Provide adequate stacking length per use to avoid spillover into drive aisles or streets. Stacking should be based on the ITE design manual. C. Building Design & Character 1. Architectural Style: a. Express the Lowcountry vernacular — simple massing, gabled or hipped roofs, deep overhangs, and porches. b. Incorporate wood, brick, or stucco finishes consistent with local traditions. Avoid metal panels, synthetic stucco, or corporate color bands. c. Rooflines should use standing seam metal, broad eaves, and bracketed canopies to reflect regional character. 2. Scale & Proportion: a. Break down long façades with bays, porches, pilasters, or window groupings to create rhythm and human scale. b. Buildings should appear as a collection of smaller volumes, not a single large box. c. Use vertical proportions for windows and doors typical of Beaufort’s traditional buildings. 3. Corporate Identity: a. Standardized architecture, prototype buildings, or trademark color schemes are prohibited. b. Logos and branding shall be expressed only through signage, not through building form, materials, or colors. c. Materials must read as authentic and regionally appropriate, with craftsmanship evident at the pedestrian level. 4. Fenestration & Transparency Transparency Requirement: Formatted: Outline numbered + Level: 1 + Numbering Style: A, B, C, … + Start at: 1 + Alignment: Left + Aligned at: 0.25" + Tab after: 0.5" + Indent at: 0.5" Formatted: Indent: Left: 0.5", No bullets or numbering    Created: 2023‐12‐08 08:25:09 [EST] (Supp. No. 1) Page 37 of 56 a. A minimum of 40% transparent fenestration is required on all pedestrian-facing façades. b. Transparency shall be measured as vision glass that allows direct interior visibility — not tinted, mirrored, or spandrel glass. See definition of transparency below. Definition of Transparency: a. Transparent glass must provide unobstructed visibility at a depth of at least 4 feet into the building interior. b. Faux walls, display boxes, or spandrel panels behind glass do not count toward transparency requirements. c. Operable shutters or wood louvers may be used for shading but must preserve visibility and rhythm. 5. Façade Activation: a. Ground floors should have entries, large windows, and architectural detailing to engage pedestrians. b. Blank walls are prohibited along public streets. c. Use of transoms, divided-light windows, and deep window trim is encouraged. 6. Materials & Details Primary Materials: a. Painted wood, fiber cement siding (with smooth finish), stucco, traditional brick, and standing- seam metal roofing. Prohibited Materials: b. EIFS, vinyl siding, backlit panels, mirrored glass, and spandrel glazing. Detailing: c. Use of porches, awnings, and shutters to articulate façades and provide shade. d. Corner boards, exposed rafters, and simple trim profiles are encouraged for authenticity. 7. Landscape & Screening Drive-Thru Screening: a. Drive-thru lanes, menu boards, and queuing areas must be screened with low masonry walls, tabby finish, or evergreen plantings consistent with the building architecture. b. Screening shall be a minimum of 3 feet high but no more than 4 feet to preserve visibility and safety. 8. Mechanical Equipment: a. HVAC units, refuse areas, and service functions must be located at the rear or side, screened from public view, and integrated with the overall design. Placement of mechanical units on roofs is preferred, especially in high-visibility, pedestrian-heavy areas. 9. Lighting & Signage Lighting: a. Fixtures shall be shielded, warm-toned, and consistent with traditional gas lantern or gooseneck styles. Formatted: Indent: Left: 0.25", No bullets or numbering Formatted: Numbered + Level: 2 + Numbering Style: a, b, c, … + Start at: 1 + Alignment: Left + Aligned at: 0.75" + Indent at: 1" Formatted: Numbered + Level: 1 + Numbering Style: 1, 2, 3, … + Start at: 4 + Alignment: Left + Aligned at: 0.25" + Indent at: 0.5" Formatted: Numbered + Level: 2 + Numbering Style: a, b, c, … + Start at: 1 + Alignment: Left + Aligned at: 0.75" + Indent at: 1" Formatted: Numbered + Level: 1 + Numbering Style: 1, 2, 3, … + Start at: 4 + Alignment: Left + Aligned at: 0.25" + Indent at: 0.5" Formatted: Indent: Left: 0.5", No bullets or numbering Formatted: Numbered + Level: 2 + Numbering Style: a, b, c, … + Start at: 1 + Alignment: Left + Aligned at: 0.75" + Indent at: 1" Formatted: Indent: Left: 0.5", No bullets or numbering Formatted: Numbered + Level: 2 + Numbering Style: a, b, c, … + Start at: 1 + Alignment: Left + Aligned at: 0.75" + Indent at: 1" Formatted: Indent: Left: 0.5", No bullets or numbering Formatted: Numbered + Level: 2 + Numbering Style: a, b, c, … + Start at: 1 + Alignment: Left + Aligned at: 0.75" + Indent at: 1" Formatted: Numbered + Level: 1 + Numbering Style: 1, 2, 3, … + Start at: 4 + Alignment: Left + Aligned at: 0.25" + Indent at: 0.5" Formatted: Indent: Left: 0.5", No bullets or numbering Formatted: Numbered + Level: 1 + Numbering Style: 1, 2, 3, … + Start at: 4 + Alignment: Left + Aligned at: 0.25" + Indent at: 0.5" Formatted: Numbered + Level: 2 + Numbering Style: a, b, c, … + Start at: 1 + Alignment: Left + Aligned at: 0.75" + Indent at: 1" Formatted: Numbered + Level: 1 + Numbering Style: 1, 2, 3, … + Start at: 4 + Alignment: Left + Aligned at: 0.25" + Indent at: 0.5" Formatted: Indent: Left: 0.25", First line: 0.25", No bullets or numbering    Created: 2023‐12‐08 08:25:09 [EST] (Supp. No. 1) Page 38 of 56 b. Corporate neon or LED border lighting is prohibited. Signage: c. Signage shall be subordinate to architecture — wall-mounted, projec ting, or freestanding monument types preferred. d. No internally illuminated box signs. 10 Sustainability & Resilience a. Encourage the use of porches and overhangs for passive shading. b. Use native landscaping to reduce irrigation. c. Encourage pervious paving materials where feasible. d. Integrate rain gardens or bioswales to manage stormwater naturally. 11. Summary Design Objectives a. Reinforce street presence and pedestrian scale. b. Conceal automobile circulation and drive-thru infrastructure from the street. c. Achieve transparency that expresses authentic, active interiors. d. Celebrate Beaufort’s Lowcountry identity through materials, detailing, and form. e. Reject formulaic prototypes; require site-specific architectural response. C. Signage: No signs shall be located on any canopy over the pumps. D. Car Wash: 1. The bay door(s) to the garage or car wash bay(s) shall not be visible from the Primary Street frontage. 2. For a stand-alone car wash not associated with a fu el station, the opening of the bay door shall either face away from the Primary Street or be screened from the street with a Liner Building (Section 4.5.9). E. Colors: Buildings and canopies shall not be painted in a color or pattern that expresses corporate identify, to the extent that the paint color or pattern is not consistent with the design standards of the district. The use of highly reflective or glossy materials is prohibited. F. Consistency: All sides of a building shall express consistent architectural detailing and character. All site walls, screen walls, pump island and canopies, and other outdoor covered areas shall be architecturally integrated with the building by using similar material, color, and detailing. G. Pump Design Guidelines: 1. Pump Canopy: a. Canopies with a pitched roof are encouraged. Mult iple canopies or canopies that express differing architectural masses are encouraged. b. Canopy ceiling shall be recessed. c. Lighting: i. Canopy lighting shall be recessed. ii. The sides (fascias) of the canopy should extend be low the lens of the fixture 12 inches to block the direct view of the light sources and lenses from property line. Formatted: Indent: Left: 0.5", No bullets or numbering Formatted: Numbered + Level: 1 + Numbering Style: 1, 2, 3, … + Start at: 10 + Alignment: Left + Aligned at: 0.25" + Indent at: 0.5"Formatted: Numbered + Level: 1 + Numbering Style: 1, 2, 3, … + Start at: 11 + Alignment: Left + Aligned at: 0.25" + Indent at: 0.5" Formatted: List 2 Formatted: List 2    Created: 2023‐12‐08 08:25:09 [EST] (Supp. No. 1) Page 39 of 56 iii. Any lighting mounted to the top or sides of the canopy, including outlining of canopies with light bands or tubes, is prohibited. iv. Any freestanding light fixtures shall be a maximum 15 feet in height if the property abuts or is located within a Transect-based District. 2. Pump Island: The intent of this section is to encourage pump island designs that are well organized and consolidated to minimize visual clutter. Pump island components consist of fuel dispensers, refuse containers, automated payment points, safety bollards, and other appurtenances. a. The color of the various components of the pump island, including dispensers, bollards, and all appurtenances, are encouraged to be muted. b. The use of translucent materials and internally lighted cabinets is discouraged as finishes or as applied treatments at the pump island or on the canopy. c. Either a pump island curb or bollard is recommended for the protection of dispensing units. 4.5.13 CIVIC BUILDINGS Civic buildings contain uses of special public importance and may be located in any zoning district. They require special design standards as described below, but should also be compatible with the surrounding context. Civic buildings may include, but are not limited to, municipal buildings, churches, libraries, schools, hospitals, and public recreation facilities. Museums may sometimes be considered civic buildings. Civic buildings do not include day care facilities, retail buildings, residential buildings, and privately-owned office buildings. A. Placement: In order to provide greater flexibility to create a special architectural statement, civic buildings are not subject to minimum or maximum setback requirements. Instead, building placement should be designed with consideration of the following guidelines. 1. Placement of civic buildings, depending upon program and site, can often benefit from being set back from the adjacent build-to lines of private development. This allows the scale of the building to have more visual emphasis and can create a public space in the foreground. The amount of this setback should be carefully determined, based on the urban design objectives of the particular site. 2. Buildings should be oriented toward the public realm (streets, squares and plazas) in a very deliberate way. 3. Civic buildings and their primary architectural el ements should be placed at the termination of public vistas to provide an appropriate level of visual importance.    Created: 2023‐12‐08 08:25:09 [EST] (Supp. No. 1) Page 40 of 56 4. Entrances should always be located on the most prominent facade(s). Avoid entrances that are at the rear or are visually concealed. 5. Parking shall be located at the rear and/or side of the building. In general, parking location standards shall match the zoning district. B. Massing: 1. The primary massing of civic buildings should be symmetrical in form. The appearance of a balanced design increases the level of formality, which is appropriate to the public use. 2. Massing of civic buildings, although often larger as a whole, should be divided into visually distinct sections. Massing divisions should provide visual order to the building and create vertical proportions within individual elements. C. Scale/Height: 1. The scale of civic buildings should be larger and more monumental than corresponding buildings in order to be more prominent and visible across greater distances. 2. Floor-to-floor heights and architectural details should be proportionately larger than those of private buildings that exist or are anticipated within adjacent blocks.    Created: 2023‐12‐08 08:25:09 [EST] (Supp. No. 1) Page 41 of 56 3. Prominent roof forms and additive elements, such as cupolas, should be used to visually extend the height of the building. D. Materials/Details: 1. Civic buildings should evoke a civic character and be carefully designed to reflect the architectural character of Beaufort. 2. Civic buildings should be made of durable, high-quality materials that create a sense of permanence and lend civic identity to the city. Preferred materials include brick, stone, and cast concrete. Stucco should only be utilized when applied over structural CMU. 3. Building details should be designed at 2 scales. At the larger scale, details should be robust, so as to be read from a distance. Nearer to the building, the details of the lower levels should include another measure of refinement that can only be seen up-close at a pedestrian scale. 4. Building design elements should be used which allow civic buildings to act as focal points of the community. Depending on the architectural style of the building, the following elements should be considered in the building design: a. Pronounced window lintels/sills/mullions, etc. b. Columns with a capital and base.    Created: 2023‐12‐08 08:25:09 [EST] (Supp. No. 1) Page 42 of 56 c. A water table constructed of high-quality masonry units (such as cast-in-place stone) that extends beyond the face of the facade. d. Vertically oriented windows of at least a 2:1 ratio. e. Cornice lines with significant depth and multiple levels of relief. f. A monumental raised entryway. g. A formal landscaped area or plaza. h. A tower element with a turret, cupola, or similar treatment. 4.5.13 Church and Institutional Buildings A. Purpose & Intent Churches and institutional buildings in Beaufort play an essential role in defining the community’s cultural and architectural character. Their design should express permanence, craftsmanship, and civic pride while remaining grounded in the Lowcountry’s vernacular traditions of simplicity, proportion, and climatic responsiveness. The goal of these guidelines is to ensure that new and renovated places of worship: i. Contribute to the cohesive visual character of Beaufort’s neighborhoods and corridors; ii. Reinforce the pedestrian-oriented scale of the city’s traditional fabric; iii. Employ authentic Lowcountry architectural forms and materials; iv. Express their civic and spiritual role through proportion and craftsmanship rather than monumentality; and v. Integrate harmoniously with surrounding residential, commercial, or institutional uses. B . Site Planning & Context 1. Street Orientation: a. Locate the principal façade and main entrance facing the public street or green, reflecting Beaufort’s historic civic patterns. b. Buildings should be sited close to the street, with front setbacks consistent with neighboring structures and landscaped forecourts or gathering lawns. 2. Pedestrian Connections: a. Provide direct pedestrian paths from the public sidewalk to the main entry. b. Parking areas shall be located to the side or rear and connected by shaded walkways. 3. Campus Form (for larger sites): a. For multi-building church campuses, organize buildings around courtyards or greens, not parking lots. b. Use tree canopies, garden walls, and covered walkways to unify the site and create shade. c. Service and vehicular areas should be visually screened and subordinate to pedestrian spaces. 4. Outbuildings: a. Parish halls, classrooms, or offices should reflect subordinate building forms—smaller scale, simpler rooflines, and consistent materials. C. Architectural Character 1, Form & Massing: a. Draw from Lowcountry precedents: simple rectangular plans, steeply pitched gable or hip roofs, and symmetrical façades. b. Emphasize vertical proportion and rhythm—tall windows, doors, and ventilating louvers that express grace and lightness. c. For prominent worship spaces, a central gable, steeple, or cupola may be used as an accent, not as a dominating tower. d. Avoid over-scaled domes or monumental porticoes inconsistent with the city’s intimate scale. Formatted: Indent: First line: 0.5" Formatted: Indent: Left: 0.5" Formatted: Indent: First line: 0.5" Formatted: List Paragraph Formatted: Indent: Left: 0.75", No bullets or numbering Formatted: List Paragraph Formatted: Font: Bold Formatted: List Paragraph, Tab stops: Not at 1" Formatted: Indent: Left: 0.25", No bullets or numbering Formatted: List Paragraph, Tab stops: Not at 1"    Created: 2023‐12‐08 08:25:09 [EST] (Supp. No. 1) Page 43 of 56 2. Porches & Entries: a. Incorporate deep porches or porticos with slender columns, wood posts, or brick piers—echoing Beaufort’s tradition of shaded transitions between indoors and outdoors. b. Entry steps and landings should be generous and welcoming, connecting seamlessly with sidewalks and gathering lawns. 3. Roof Forms: a. Preferred roofs: gable, hip, or cross-gable with moderate to steep pitch (6:12–12:12). b. Use standing seam metal or architectural shingles in muted, coastal tones. c. Broad eaves with exposed rafter tails or simple trim are encouraged. 4. Proportion & Rhythm: a. Articulate façades with bays, pilasters, or window groupings that reflect internal organization. b. Maintain vertical emphasis; avoid long horizontal bands or large unbroken walls. c. Larger sanctuaries should step down in height toward adjacent streets or neighborhoods to soften scale. D. Fenestration & Transparency 1. Window Design: 1. Use vertically proportioned, operable windows with divided lights, wood or wood-look frames, and trim of appropriate depth. 2. Window groupings may express the sacred interior through tall, narrow proportions or paired openings. 3. Clerestory or transom glazing encouraged for natural light and ventilation. 2. Transparency & Detailing: 1. Ground-level façades facing public streets should maintain a minimum of 25% transparency to create visual connection and safety. 2. Clear glass preferred; lightly tinted acceptable. Avoid mirrored or opaque glass. Stained glass may be acceptable at the discretion of staff/board members. 5. Materials & Craftsmanship A. Primary Materials: 1. Painted wood siding, smooth fiber cement, traditional brick, or lime stucco. 2. Heavy timber, wood brackets, and hand-crafted detailing encouraged for authenticity. B. Secondary Materials: 1. Metal roofs and wood shutters typical of Lowcountry precedent. 2. Stone or precast limited to accent elements (sills, thresholds, steps). C. Color Palette: 1. Soft, coastal tones: whites, grays, creams, pale yellows, and greens. 2. Trim and shutters may contrast slightly for depth and expression. 6. Civic Expression A. Steeples & Cupolas: 1. Allowed where scaled to the building mass and used as focal points rather than monuments. 2. Details should be crafted and proportional, not prefabricated or exaggerated. 3. Belfries or cupolas may serve as ventilation towers or daylight monitors. B. Bell Towers & Crosses: 1. Integrate into the building form, not as detached sculptural elements. 2. Lighting of crosses or towers shall be subdued, downward, and non-glaring. C. Entrances & Gathering Spaces: 1. Forecourts, gardens, or porches shall function as publicly inviting civic thresholds. 2. Integrate shade trees, benches, and low brick or tabby walls for enclosure and comfort. 7. Landscape & Site Features A. Lowcountry Landscape Character: 1. Emphasize native trees (live oak, magnolia, palmetto), shaded walks, and pervious surfaces. Formatted: Font: Bold Formatted: List Paragraph Formatted: Font: Bold Formatted: List Paragraph    Created: 2023‐12‐08 08:25:09 [EST] (Supp. No. 1) Page 44 of 56 2. Preserve existing canopy trees where possible. 3. Use lawn panels, tabby walls, and native plantings to define outdoor gathering spaces. B. Parking & Circulation: 1. Parking areas should be broken into smaller courts framed by trees and low walls. 2. Encourage shared parking agreements with adjacent uses to reduce impervious surfaces. 8. Lighting & Signage A. Lighting: 1. Warm, low-level fixtures that highlight architectural features and pedestrian areas. 2. Concealed uplighting may be used for steeples or façades if shielded and subtle. B. Signage: 1. Monument or wall-mounted signs integrated with building materials and scale. 2. Internally illuminated signs, LED panels, and electronic message boards are prohibited. 9. Sustainability & Building Performance A. Utilize deep porches, tall operable windows, and shaded courtyards for natural cooling. B. Employ rainwater collection and bioswales as visible landscape features. C. Orient main façades to capture prevailing breezes and manage sunlight naturally. 10. Summary Design Principles 1. Express civic presence through simplicity, proportion, and craft, not size or ornament. 2. Reinforce Beaufort’s walkable, human-scaled fabric with street-oriented entries and shaded public space. 3. Employ authentic materials and climate-appropriate detailing. 4. Use roof forms, porches, and windows that reflect traditional Lowcountry building logic. 5. Avoid corporate prototypes or styles inconsistent with Beaufort’s architectural lineage. 4.6: BUILDING DESIGN STANDARDS 4.6.1 GENERAL TO ALL APPLICABLE DISTRICTS (SEE 4.2.2) A. Size, Mass and Scale: The scale of buildings and accessory structures (including canopies) shall be appropriate to the scale of structures located in the neighboring context. B. Proportions of Bays and Openings: All building bays, including porches, colonnades and porticos as appropriate, shall be square or vertical in proportion, unless the design merits a horizontally- proportioned opening. Wall openings, with the exception of transoms and storefronts, shall be square or vertical in proportion. The facade of a proposed building should draw upon the proportion and number of bays in surrounding buildings, as defined by windows, doors, and column spacing, to establish a compatible scale. C. Building Materials: Building wall materials shall be combined on each facade only horizontally, unless the building is broken vertically by a change of plane, or a vertical architectural element. Heavier materials, such as masonry and stucco, shall be located below lighter materials, such as cement fiber or wood siding. D. Roof Forms: Where pitched roofs exist, primary roofs shall have a minimum slope of 4:12, while ancillary roof slopes may be no less than 2:12. E. Garages and Accessory Structures: Attached garages, detached garages, and other accessory structures shall be subordinate in height, footprint, and proportion to the primary structure on the site, and shall be compatible with the principal structure in terms of roof form, materials, and color. Where a garage contains an accessory dwelling unit above, it may exceed the height of the primary structure. F. Trash, Mechanical, Utility and Service Equipment and Areas:    Created: 2023‐12‐08 08:25:10 [EST] (Supp. No. 1) Page 45 of 56 1. Loading docks, service areas, and trash disposal facilities (e.g., trash and recycling receptacles, compactors, dumpsters) shall be hidden or screened from view of streets, parks, squares, waterways, or significant pedestrian spaces. Loading areas may be oriented toward adjoining developed properties that are zoned for nonresidential uses, if such loading areas are screened from view. See Section 2.7.1 E. for specific provisions about these areas in the Historic District. 2. Mechanical equipment, such as ventilatio n systems, commercial exhaust fans, rooftop terminations, commercial cooling equipment, heating and air conditioning units, TV antennas, and satellite dishes, shall be hidden or screened from view. Lattice, open brick enclosures, or vegetation can be used to conceal mechanical equipment. Screening material shall be properly maintained. If vegetation is used for screening, the mature size of the vegetation shall be considered so that equipment air flow will not be compromised. G. Colors: Buildings and additional site elements — e.g., bollards, arbors, drive-thru canopies, sign posts — shall not be painted in a color or pattern that expresses corporate identify, to the extent that the paint color or pattern is not consistent with the design standards of the district. Fluorescent colors, such as ASHTO safety yellow, are also prohibited except where required by a public agency. H. Outdoor Display of Merchandise: 1. Definition of "Merchandise": For purposes of this section, merchandise is defined as any item that is for sale on the premises or is representative of an item that is for sale on the premises, regardless of whether or not that particular item is available for purchase. 2. Arrangement, Location, and Type of Merchandise: a. Arrangement: Merchandise shall be arranged and spaced so as not to clutter the front of the property, as determined by the Administrator. b. Outdoor Merchandise: Except in T5-DC per Section 4.6.1 H.2.d., automobiles, trucks, boats, trailers, outdoor landscape structures (garden sheds, arbors, gazebos, etc.), plant materials, agricultural products, lawn maintenance equipment, and outdoor furniture may be displayed outdoors per the provisions of this section. Outdoor merchandise may remain outdoors when the business is closed. c. Indoor Merchandise: Merchandise other than that typically used and stored outdoors may be displayed outdoors within a maximum of 5 feet from, and directly in front of building or the tenant space. Indoor merchandise shall only be displayed during business hours. d. Specific to T5-DC: i. Display Hours: All merchandise shall be displayed outdoors during business hours only. ii. Location: All merchandise displayed outdoors shall be within 5 feet of the building and only in front of the building or the tenant space. 3. Location: a. Merchandise shall not be placed on the public sidewalk or within the right-of-way without approval of the Administrator. If merchandise is displayed on any privately owned sidewalk, a minimum of 4 feet of the sidewalk as measured from the curb must remain open and unobstructed to facilitate safe pedestrian circulation. b. Areas designated for vehicular parking may not be used as outdoor display areas. c. Merchandise shall not be displayed on public street furniture or landscaping.    Created: 2023‐12‐08 08:25:10 [EST] (Supp. No. 1) Page 46 of 56 4. Designation in Plans: plans for new developments or reuse of an existing space shall clearly designate any areas for outdoor display of outdoor merchandise. Outdoor display of merchandise shall only occur in areas designated for such display on the approved plan. 5. Vending Machines and Realty Advertising Racks: Vending machines, except newspaper boxes, shall be screened from view from the street. Realty advertising racks, and other street furniture visible from the public right-of-way shall not display any advertising or other commercial message, except where such advertising or commercial message is counted as a sign under Article 6 (Signs). These racks shall be constructed of wood or metal. 6. Gifts to the Street: Items such as benches, planters, or other decorative elements that enhance a shopfront, may be displayed so as not to clutter the street, and as long as they meet the clearance requirements of merchandise listed above. These elements must be properly maintained and may not contain advertising of any kind. 7. Screening Requirements: Outdoor merchandise may be displayed on the site behind buffers meeting the requirements the Required Buffer Width and Planting Chart in Section 5.5.1. I. Fencing: 1. Chain link fencing is not permitted to extend past the front of any primary structure or be located along any street right-of-way. Chain link fencing is not permitted in the Historic District. 2. Barbed wire fencing is prohibit ed except in the LI district. 4.6.2 T1 DISTRICT STANDARDS There are no specific standards for this district. The Administrator will determine whether the proposed development is compatible with the surrounding context and may choose to permit the appropriate Design Review Body to review the project. In the Historic District, any development in T1 districts shall be reviewed by the Historic Review Board. 4.6.3 SPECIFIC TO TRANSECT-BASED DISTRICTS (SEE 4.2.2) A. Building Materials and Details: 1. Building walls shall be finished in 1 or more (but not more than 3) of the following materials: a. Wood. b. Fiber cement board siding, smooth finish. c. Concrete masonry units with stucco (CBS). d. Reinforced concrete with stucco. e. Brick. f. Tabby (or stucco with oyster shell aggregate, typ.). gf. Corrugated metal, which may be approved by the Administrator based on the surrounding context and location on the site. h. Other materials as approved by the Administrator, based on visual compatibility with listed approved materials. 2. Visible foundation walls and chimneys shall be finished in one of the following materials: a. Brick.    Created: 2023‐12‐08 08:25:10 [EST] (Supp. No. 1) Page 47 of 56 b. Stucco. c. Tabby. 3. Columns may be constructed of the following materials: a. Wood. b. Wood or fiber cement clad. c. Cast iron. d. Concrete with smooth stucco finish. e. Cast stone with smooth finish. f. Brick. g. *Perma-cast. h. *Other synthetic materials as approved by the Administrator, based on visual compatibility with listed approved materials. 4. Railings and balustrades may be constructed of the following materials: a. Painted wood. b. Wrought iron. c. *Aluminum. d. *PVC. e. *Other synthetic material as approved by the Administrator, based on visual compatibility with listed approved materials. 5. Doors shall be made of wood, metal, glass, or fiberglass*. 6. Roofs with visible pitches shall be constructed of the following materials: a. 25-year architectural dimension shingles. b. Tile (clay, cement, natural or manufactured stone). c. Nonreflective pre- finished metal. d. Slate. e. Reflective metal such as copper. f. Other similar metals as approved by the Administrator. 7. The following materials are prohibited: a. Exposed concrete masonry units. b. Vinyl Siding. c. Plastic shutters. d. Stone. e. Metal panels. f. Day-glo, luminescent, iridescent, neon or similar types of color finishes. g. Mirrored glass with a reflectivity of 20% or more.    Created: 2023‐12‐08 08:25:10 [EST] (Supp. No. 1) Page 48 of 56 h. Roofing. i. Plastic or PVC roof tile. ii. Nontraditional colors such as orange or purple. i. Vinyl Windows on contributing buildings in the Historic District. 8. Exceptions: In the Historic District, materials indicated with an asterisk (*) may be permitted, on a context-specific basis, at the discretion of the Design Review Body. B. Roof Forms: 1. Specific to zones T4 and T5: a. Permitted roof types include gabled, hipped, shed, barrel vaulted, flat, mono-pitch, and domed. Applied and partial (less than 3 sides) mansard roofs are not typically permitted but may be permitted at the discretion of the Design Review Body based on compatibility with the surrounding context, size, mass and scale of the structure. b. Shed, flat, and mono-pitch roofs shall be concealed with parapets along the street frontage, except on porches, balconies, or building extensions. c. Downspouts and gutters should be galvanized steel, aluminum, or copper and shall match in materials and finish. d. Roof penetrations shall be hidden or painted to match the color of the roof. e. Skylights must be flat to the pitch of the roof. In the Historic District and T5 districts, they shall not be located on any sloped roof facing the primary frontage. C. Windows and Doors: 1. Fenestration/Transparency, Glass on a window of any type (including storefront) or door of any type that has no coatings (such as frosted, tinted or spandrel glass) or treatments, so that the building’s interior is visible from the outside. Transparent fenestration shall mean clear or lightly tinted vision glass with a minimum visible light transmittance (VT) of 0.60 that provides direct, unobstructed views into an active interior space at least three feet deep from the interior face of glass. Opaque spandrel panels, reflective glass, back-painted glass, or any glazing with a solid wall, shelving, or storage directly behind it shall not be considered transparent fenestration. 2. sSpecific to zones T4 and T5: Any commercial or mixed-use building elevation facing a street, waterway, or public space shall include a minimum of 40% of transparent fenestration (windows and doors) on the ground floor and 20% on upper floors. Apartment Houses shall conform to these requirements as much as possible, however the minimum percentage of transparent fenestration on the ground floor may be adjusted at the discretion of the Design Review Body. It shall not be reduced to lower than 30%. Formatted: Indent: Left: 0", First line: 0" Formatted: Font: Not Bold    Created: 2023‐12‐08 08:25:10 [EST] (Supp. No. 1) Page 49 of 56 23. Proportion and Details: a. Windows shall not be flush with exterior wall treatments. Windows shall be provided with an architectural surround at the jambs and header, and a projecting sill. b. Window openings may be grouped horizontally, but trim between windows shall be at least 3.5 inches wide. This does not apply to storefront windows. c. There must be visual clearance behind the glass for a minimum of six feet (6’). Three- dimensional display windows at least six feet (6’) deep are permitted and may be counted toward the transparent glass requirements. d. Ground floor windows of commercial uses shall be kept clear at night, free from any window covering, with internal illumination. When ground floor glass conflicts with the internal function of the building, other means shall be used to activate the sidewalk , such as, display windows, public art, architectural ornamentation or detailing or other similar treatment. c. Specific to zones RMX, T4, T4 HN, and T5: i. Facades should have several window sizes with smaller ones above. This is particularly important when buildings rise more than 2 stories. ii. Thin mullions or muntins shall be required on windows larger than 2 feet in any direction, except for shopfronts. The depth of the mullion shall not be less than the width. iii. in the historic district, windows shall have exterior-applied muntins and interior spacer bars (SDL) or be true divided lite (TDL) windows. Formatted: Font: Not Italic Formatted: Numbered + Level: 1 + Numbering Style: a, b, c, … + Start at: 3 + Alignment: Left + Aligned at: 1" + Indent at: 1.25" Formatted: Font: Not Italic    Created: 2023‐12‐08 08:25:10 [EST] (Supp. No. 1) Page 50 of 56 D. Architectural Details: 1. Shutters: Shutters shall be sized and placed so as to equal the width that would be required to cover the window opening. Operable shutters are preferred. a. Specific to zones RMX, T4 and T5: Shutters must be operable and have all appropriate hardware. 2. Column Bays: Columns and piers shall be spaced no farther apart than they are tall. Column bays shall be of equal and precise proportions. 3. Specific to zones RMX, T4 and T5: a. Cornices are required to delineate the tops of facades. Expression lines are required to delineate the divisions between the first floor and upper floors. Cornices and expression lines should either be a molding extending a minimum of 2 inches, or a jog in the surface plane of the building wall greater than 2 inches. Cornice or eave height shall be consistent with the dominant cornice or eave height of buildings on the same block. b. The elevation of the first floor and floor-to-floor heights shall be compatible with the expression of floors in the facades buildings on the same block. c. Buildings shall have a base, wherein the bottom is articulated differently from the rest of the building, either by change of material or a setback. Material and craftsmanship on the    Created: 2023‐12‐08 08:25:10 [EST] (Supp. No. 1) Page 51 of 56 base shall be as or more durable and of equal or higher quality than the rest above. For single-family detached dwellings, the base consists of the porch and/or primary entry. 4.6.4 SPECIFIC TO CONVENTIONAL DISTRICTS (SEE SECTION 4.2.2) A. Building Materials and Details: 1. Building walls shall be finished in 1 or more (but not more than 3) of the following materials: a. Wood, painted or natural. b. Fiber cement board siding, smooth finish. c. Concrete masonry units with stucco (CBS). d. Reinforced concrete with stucco. e. Brick. f. Tabby (or stucco with oyster shell aggregate, typ.). gf. Corrugated metal. gh. Other compatible and authentic materials as approved by the Administrator. 2. Specific to LI District: Building walls not visible from a public right-of-way may be finished in metal or exposed CMU block, in addition to the materials listed above. 3. Visible foundation walls and chimneys shall be finished in 1 of the following materials: a. Brick. b. Stucco. c. Tabby. dc. Specific to LI District: Painted CMU block is permitted. B. Roof Forms, Specific to RMX and IC Districts: 1. In general a slope of 4:12-12:12 is appropriate for primary roofs, while ancillary roof slopes may be 3:12-5:12. 2. Permitted roof types include gabled, hipped, shed, barrel vaulted, flat, mono-pitch, mansard, and domed. Applied and partial (less than 3 sides) mansard roofs are not typically permitted, but may be at the discretion of the Design Review Body based on compatibility with the surrounding context, size, mass and scale of the structure. 3. Shed, flat, and mono-pitch roofs shall be conc ealed with parapets along the street frontage. 4. Specific to IC District: a. Downspouts and gutters are to be galvanized steel, aluminum, or copper. Downspouts and gutters are to match in materials and finish. b. Chimneys shall have a masonry exterior finish. c. Roof penetrations shall be hidden or painted to match the color of the roof. d. Skylights must be flat to the pitch of the roof and shall not be located on any sloped roof facing the primary frontage. C. Windows and Doors:    Created: 2023‐12‐08 08:25:10 [EST] (Supp. No. 1) Page 52 of 56 1. Transparency, Specific to RMX and IC Districts: Building elevations that face the street shall have at least 40% of the first-floor wall area consist of windows and/or doors, and 15% of upper floors. D. Massing and Articulation: 1. Building footprints shall not be larger than a single block. Where there is not a defined block structure in the area, see Section 7.2.2 B. for additional standards. 2. Facades that are visible from streets, parks, squares, waterways, significant pedestrian spaces, or primary vehicular access points or parking areas: a. Shall not include expanses of blank walls (without any transparent windows or doors) of 20 linear feet or greater. b. Shall be divided into architecturally distinct sections (or bays) with similar proportions. The bays should average no greater than 35 linear feet wide through the use of different architectural divisions or elements such as pilasters, columns, and/or changes in wall depths or floor and roof levels. c. Shall be in harmony with each other in terms of scale, proportion, detailing, material, color, and design. 3. On corner lots, distinct roof or building elements shall be utilized, such as porches, canopies, Arcades, or towers. Buildings may be aligned to create public gathering spaces, while conforming to the building placement and orientation requirements set out in Section 2.5.1 C.    Created: 2023‐12‐08 08:25:10 [EST] (Supp. No. 1) Page 53 of 56 E. Architectural Proportions and Details: 1. All buildings shall have a clearly discernible base, body, and cap, with masonry soldier courses or other horizontal expression lines separating each element. 2. Cornices are recommended to delineate the tops of facades. Expression lines are recommended to delineate the divisions between the first floor and upper floors. 3. Colors: Recommended colors are traditional historic colors, earth tones (greens, tans, light browns, terra cotta, grays, pale primary and secondary colors, and white and cream tones. Trademark colors are considered signage and will be counted as such unless they are consistent with the color palette as previously described. F. Additional Guidelines Specific to IC District: All buildings constructed as part of a campus may be subject to the guidelines for civic building outlined in Section 4.5.10, or shall be held to standards similar to the requirements in the surrounding context. 4.6.5 MANUFACTURED HOME PARK DISTRICT STANDARDS The following standards shall apply to all development within the Manufactured Home (MH) Park District: A. Site Size: Parcels shall be a minimum of 5 acres with a minimum width of 150 feet.    Created: 2023‐12‐08 08:25:10 [EST] (Supp. No. 1) Page 54 of 56 B. Infrastructure: The site shall be served by public water and sewer facilities. C. Maximum Density: 7 manufactured home units per acre. D. Minimum Space Per Unit: 40 feet in width, and 4,000 square feet of area which shall be clearly defined. E. Minimum Unit Spacing: 20 feet of clearance between only those MHs parked end to end and any building located within the park. F. Open Space: Required dedication of open space shall be in accordance with the provisions of 7.4. G. Subdivision: All lots-regardless of whether they are proposed for sale or lease-shall undergo Subdivision Review (Section 9.9). H. Posting: The "certificate of occupancy" shall be conspicuously posted in the office or on the premises of the MH District. I. Administrative Procedures: 1. A proposed Manufactured Home Park must be rezoned to the MH Park District through the amendment process in Section 9.16 (Amendments). 2. Effect of Approval: If approved by city council, all information pertaining to the proposal shall be adopted as an amendment to this Code as the standards of development for the particular MH Park District. J. Permanent Installation: 1. MHs shall be attached to a permanent foundation of brick, concrete, framing, or block that is unpierced, except for required ventilation and access or for flood hazard construction. 2. Any tongue, axles, running lights, and removable towing apparatus must be removed prior to the issuance of a certificate of occupancy. K. Entrances: 1. At the main entrance, there shall be an entryway transition, such as a porch or stoop, that is a minimum of 6 feet by 6 feet. 2. Stairs, porches, entrance platforms, ramps, or other means of access shall be attached to the structure and anchored securely to the ground. L. Roof Form and Materials: 1. Roofs shall have a minimum eave projection and roof overhang of 6 inches, not including the gutter. 2. Roofs must be covered with a material that is customarily used on site-built dwellings. Aluminum or metal roofing is not permitted unless standing seam metal roofing or metal shingles are used. M. Wall Materials: Exterior siding shall be wood, vinyl, metal horizontal siding, brick, fiber cement board, stucco, or similar materials. Smooth, ribbed, or corrugated metal or plastic panels, exposed plywood, and materials with a high-gloss finish are not permitted. 4.7: HISTORIC DISTRICT INFILL DESIGN GUIDELINES    Created: 2023‐12‐08 08:25:10 [EST] (Supp. No. 1) Page 55 of 56 4.7.1 APPLICABILITY AND INTENT The following principles shall be considered by the HRB for new construction within the Historic District overlay. The intent of these principles is to protect the integrity and coherence of the Historic District, and to provide clarity and consistency for developers, designers, and regulators. 4.7.2 PRINCIPLES FOR COMPATIBLE INFILL A. The District is the Resource, Not Only Its Individual Parts: Beaufort is comprised of a number of individually significant buildings. Additionally, Beaufort's historic areas are significant as a collective whole, and shall be considered as such and protected in their entirety. This is the primary, overarching principle. 1. New construction shall respond to and protect the integrity of the overall Historic District in much the same way as an addition does to a historic building. 2. The integrity of the district — why, where and when a property is important — shall be upheld in all new construction and rehabilitation projects. Guidelines for determining integrity are as follows: a. Location: This is the relationship between the property and its historical context. b. Design: This is the combination of elements that create the feeling of a district or structure. These elements include building patterns, streetscapes, site elements, building size, mass and scale, spatial relationships, and specific architectural elements and details. c. Setting: This is the physical environment of a property, and should be evaluated on its context as well as on the historical role the property has played and continues to play. Important features include topography, vegetation, man-made features, and relationships between existing structures and their surroundings. d. Materials: These are the physical elements that make up a property or district. e. Workmanship: This is the physical evidence of the crafts of a particular culture or time period. This particularly applies to rehabilitation projects, but for new infill projects, workmanship of surrounding structures should be considered and respected. Retaining the details of the original craft and craftsman (i.e., wood, masonry, tabby etc.) of the original building ensures the historic fabric is retained and serves as an important component of the integrity and the patina of age of individual structures and the district as a whole. f. Feeling: This is the property's expression of the aesthetic or historic sense of a particular period of time. This particularly applies to rehabilitation projects, but for new infill projects, the feeling of surrounding structures should be considered and respected. g. Association: This is the direct link between an important historic event or person and a property. This particularly applies to rehabilitation projects, but for new infill projects, association of particular sites and neighborhoods should be considered. B. New Construction Shall Reinforce the Historic Significance of the District: Infill buildings should relate to and strengthen the core characteristics of the district, as identified in the National Register nomination's "Statement of Significance." 1. New construction should build upon the history and established pattern of the district through its design, landscape, use, and cultural expression. An understanding of the character and significance of the district should predicate any design or development activities.    Created: 2023‐12‐08 08:25:10 [EST] (Supp. No. 1) Page 56 of 56 2. If applicable, cultural expressions and/or historic uses within the district may be considered in design or development activities. C. New Construction Shall Complement and Support the District: The Historic District has a distinct rhythm of massing, scale, and siting. Infill buildings should not deviate in a detracting manner from these elements, but appear as complementary members of the district. 1. Lot size, massing, siting, floor area ratio, and height must correspond to the adjacent buildings that contribute to or complement the rhythm of the district. 2. The use of buildings will be secondary to their design and integration into the district. However, newly introduced uses should not be detrimental to the historic fabric. D. Infill Shall Be Compatible Yet Distinct: New buildings should be identifiable as being of their period of construction; however, they should not be so differentiated that they detract from - or visually compete with - their historic neighbors. Within historic districts, compatibility is more important than differentiation. 1. Because the district is the resource, the reconstruction of buildings that existed within the district during the period of significance is allowed. Reconstructions shall be done in accordance with the Secretary of the Interior's "Standards for Reconstruction." 2. Style is discouraged from being the primary indicator of differentiation. 3. Means of differentiation may include materials, mechanical systems, and construction methods. E. The Exterior Envelope and Patterning of New Buildings Shall Reflect District Characteristics: Infill design elements, patterning, texture, and materials should reflect the aesthetic and historic themes of the district. 1. Patterns of fenestration, building divisions, setbacks, and landscapes that are characteristic of the district should inform the design of new buildings. 2. Mechanical and automobile infrastructure should be appropriately concealed when not consistent with the district's character. F. Contributing Buildings Should Not Be Demolished to Create Infill Opportunities: Properties deemed contributing in the "1997 Beaufort County Above Ground Historic Sites Survey," or in the most recent historic resources survey, should not be removed or rendered non-contributing to make way for new construction. G. Archeological Resources Shall Be Preserved in Place or Mitigated: When new construction disturbs or affects archaeological resources, mitigation measures should be taken such that the history of a the site can be traced. See Section 8.3 for archeological assessment requirements. 1. Archaeological mitigation must conform to local, state, and federal laws and accepted professional standards. 2. When appropriate, archaeological mitigation should be accessible to the general public in an educational capacity. 3. Information yielded from archaeological mitigation should be interpreted in the new building and throughout the district. Beaufort, South Carolina, The Beaufort Development Code 2: MAP AND DISTRICTS Beaufort, South Carolina, The Beaufort Development Code    Created: 2023‐12‐08 08:25:06 [EST] (Supp. No. 1) Page 1 of 73 2: MAP AND DISTRICTS 2.1: PURPOSE AND INTENT For the purposes of this Code, the various districts have been categorized as Transect-based districts (as explained in Section 2.3.1) and conventional districts. In general, standards and provisions for Transect-based districts are designed to create walkable, mixed-use environments, whereas the conventional districts are more reflective of the existing, primarily automobile-dependent, configuration. 2.2: OFFICIAL ZONING MAP 2.2.1 ESTABLISHMENT AND MAINTENANCE A. Zoning Map: The City Council hereby adopts the City of Beaufort Zoning District Map (hereafter referred to as the "Zoning Map"), which is on file with the Administrator. The Zoning Map is hereby incorporated into this Code by reference as though it were fully included here. The Zoning Map shall be the final authority as to the status of the current zone classification of land in the City, except in the case of proven errors. B. Districts Established: The City of Beaufort shall be divided into Transect-based, conventional, and overlay districts that implement the Comprehensive Plan. The location and boundaries of the districts in this Article are hereby established, and shall be shown on the Zoning Map. C. Interpretation of District Boundaries: The Administrator shall be initially responsible for interpretations of the official Zoning Map. Where uncertainty exists as to the boundaries of any of the districts shown on the Zoning Map or maps, the Zoning Board of Appeals, upon written application or upon its own motion, shall determine the location of such boundaries on said Zoning Map or maps. The following rules shall govern the interpretation of District Boundaries: 1. Boundaries indicated as approximately following the centerlines or right-of-way lines of streets, highways, alleys, railways, or public utility easements shall be construed to follow such lines. 2. Boundaries indicated as approximately following plotted lot or tract lines shall be construed as following such lines, whether public or private. 3. Boundaries indicated as approximately following the City limit line shall be construed to follow such City limit line. 4. Boundaries indicated as approximately following the center, mean high water mark, or shoreline of streams, rivers, canals, lakes, marsh areas, or other bodies of water, lowland, or tidal areas, shall be construed to follow such boundaries. 5. For those distances not specifically indicated on the Zoning Map, or in other circumstances not covered by Sections 1. through 4. above, the Zoning Board of Appeals shall interpret the district boundaries.    Created: 2023‐12‐08 08:25:02 [EST] (Supp. No. 1) Page 2 of 73 D. Record Keeping: The original and all revised versions of the Zoning Map shall be certified as such by the signature of the Administrator, and shall be kept on file, in either hardcopy or digital form, in the office of the Department of Planning and Development Services. E. Public Access: Copies of the Zoning Map shall be made available for public inspection in the office of the Department of Planning and Development Services during normal business hours. 2.2.2 CHANGES A. Changes made to zone boundaries or other matters portrayed on the Zoning Map shall be made in accordance with Section 9.16 (Amendments and Rezonings). B. The Administrator shall enter changes onto the Zoning Map within a reasonable period of time after a map amendment is approved by the City Council. Where the ordinance enacting a zone boundary change contains wording explaining or clarifying the location of the new boundary, the Administrator may enter notations on the Zoning Map reflecting the ordinance wording. C. No changes of any nature shall be made to the Zoning Map or matter shown thereon except in conformity with the procedures set forth in this Code. Any unauthorized change of whatever kind by any person or persons shall be considered a violation of this Code and punishable as provided by law. D. Regardless of the existence of purported copies of the Zoning Map that may from time to time be made or published, the Zoning Map which shall be located in the Department of Planning and Development Services, shall be the final authority as to the current zoning status of land and water areas, buildings, and other structures in the City, except in the case of proven errors. E. The Administrator shall maintain copies of superseded versions of the Zoning Map for historical reference. F. Where City limit boundaries change by virtue of annexation or some other means, the following provisions shall apply: 1. Areas to be annexed into the incorporated limits of Beaufort shall be assigned zoning classifications by the City Council. 2. In all cases where additions to the City's tota l area require adjustments in the zoning district boundaries, the adjustment shall be made to the Zoning Map. 3. When reductions are made in the City's total incorporated area the provisions of this Code shall no longer apply to that area. 2.3: TRANSECT-BASED AND CONVENTIONAL DISTRICTS 2.3.1 PURPOSE AND INTENT OF THE TRANSECT APPROACH Most of the zoning districts for the City of Beaufort are ordered and classified according to the "rural-to-urban" Transect (see diagram below). The Transect is a method of classifying the natural and built environments as a continuum of conditions, ranging from natural and rural lands to urban centers. The value of the Transect is that it groups compatible buildings, public spaces, and infrastructure by scale and intensity of use, while still allowing the development of neighborhoods where residents and workers can walk to work, school, and daily errands. For example, a public space at the edge of the city may be a large regional park with hiking trails, while a public space in the City center may be a more intimate square where markets and events take place. Similarly, a    Created: 2023‐12‐08 08:25:02 [EST] (Supp. No. 1) Page 3 of 73 residence near the edge of the City may be on a large lot set back from the street, while a residence in the downtown area may be a condominium in a three- or four-story building. The Transect approach is implemented in Beaufort through different levels of development intensity that range from the T1-Natural Preserve at the low end to the T5-Downtown Core and Urban Center districts at the high end. These Transect zones are also referred to as "form-based districts" because each has detailed provisions for the mix of uses, building design, density, height, street design, the design of parks and open space, parking, and other aspects that make up the City. The Transect zones that guide Beaufort's form-based districts are as follows: 2.3.2 SUMMARY OF TRANSECT-BASED DISTRICTS T1-NATURAL PRESERVE DISTRICT (T1) The T1-Natural Preserve district is intended to preserve areas that contain sensitive habitats, active or passive open spaces and urban parks, cemeteries, and limited agricultural uses. This district typically does not contain buildings, with the exception of small civic buildings, interpretive centers, or supportive recreation facilities. There are no specific development standards listed for this district. T2-RURAL DISTRICT (T2) The T2-Rural district is made up of lands in an open, cultivated, or sparsely settled state. Planning for future development within the City of Beaufort does not include rural areas, and inclusion of the T2-Rural district here is for illustrative purposes only. There are no development standards listed for this district.    Created: 2023‐12‐08 08:25:03 [EST] (Supp. No. 1) Page 4 of 73 T3-SUBURBAN DISTRICT (T3-S) T3-Suburban district is single-family residential in character, with less development than other Transect-based districts within the city. While almost exclusively residential, civic and park functions are also complementary to the character within this district. T3-NEIGHBORHOOD DISTRICT (T3-N) The T3-Neighborhood district is residential in character, and includes a mixture of residential and civic uses. Residential units are an assortment of sizes and types including cottages, small houses, two- and three-family dwellings, village houses, and cottage courts. Carriage houses, located behind single family homes, and on the interior of lots, may contain studios or other small businesses.    Created: 2023‐12‐08 08:25:03 [EST] (Supp. No. 1) Page 5 of 73 T4-HISTORIC NEIGHBORHOOD DISTRICT (T4-HN) The T4-Historic Neighborhood district is a primarily residential district that encompasses the entire historic district with the exception of a few north-south commercial corridors. It contains houses and residential buildings that are characterized by generous front porches, southern orientation, and historic architectural detailing. A limited number of corner retail buildings historically existed, and continue to exist, in this district.    Created: 2023‐12‐08 08:25:03 [EST] (Supp. No. 1) Page 6 of 73 T4-NEIGHBORHOOD (T4-N) The T4-Neighborhood district is a mixed-use zone of urban residential units and limited commercial development. A wide range of building types exist in the T4-Neighborhood district, including, but not limited to, apartment buildings, mixed-use buildings, rowhomes, duplexes, corner stores, and both attached and detached single-family housing. A sub-district of this is the T4-Neighborhood Artisan (T4-NA) district. It incorporates more industrial uses, as well, and is applicable in the Depot Road area where industrial uses abut residential areas.    Created: 2023‐12‐08 08:25:03 [EST] (Supp. No. 1) Page 7 of 73 T5-DOWNTOWN CORE DISTRICT (T5-DC) The T5-Downtown Core district consists of higher density, mixed-use buildings that accommodate retail, rowhomes, offices, and apartments. A tight network of streets, including those in Beaufort's historic commercial downtown, allows this district to be a highly walkable area. Buildings are set very close to the street in order to define the public realm and allow for visible activity along the streetscape. T5-URBAN CORRIDOR DISTRICT (T5-UC) The T5-Urban Corridor district consists of higher density, mixed-use buildings that accommodate retail, rowhomes, offices, and apartments located along primary thoroughfares. A tight network of streets allows this district to be a highly walkable area. Buildings are set very close to the street in order to define the public realm and allow for visible activity along the streetscape.    Created: 2023‐12‐08 08:25:03 [EST] (Supp. No. 1) Page 8 of 73 2.3.3 SUMMARY OF CONVENTIONAL DISTRICTS REGIONAL MIXED-USE (RMX) The RMX district's intensity accommodates region- and community-serving commercial and business uses, as well as highway-oriented businesses. Development form supports a high-quality commercial character coordinated with a uniform streetscape that enables pedestrian and transit access.    Created: 2023‐12‐08 08:25:04 [EST] (Supp. No. 1) Page 9 of 73 LIGHT INDUSTRIAL DISTRICT (LI) The LI district permits office, manufacturing, industrial, and warehousing uses, as well as their supporting uses. Moderate to high intensities are permitted to achieve maximum land utilization that will also accommodate small businesses and start-up or incubator businesses. It also allows for larger industrial parks where appropriate. INSTITUTIONAL & CAMPUS DISTRICT (IC) The IC district supports generally non-residential institutions and employment areas that are designed in a campus-like setting, such as hospitals, universities, research facilities, and offices. It is intended to ensure that these unique institutions are designed to be compatible with their surroundings and the rest of the city. MANUFACTURED HOME PARK DISTRICT (MHP) The MHP district provides a sound and healthy residential environment that is sufficient to meet the needs of inhabitants living in manufactured homes, to protect manufactured home parks from encroachment by incompatible uses, and to encourage the consolidation of manufactured homes into manufactured home parks. MILITARY RESERVATION DISTRICT (MR) The MR district is applied to existing military bases and Department of Defense lands, and provides for military facilities and all supporting activities, such as housing, offices, and services that are on base land, even though they would otherwise be considered separate uses. Military property is under jurisdiction of the federal government. Recommendations and standards for this district are not included since these lands are federally owned, and are typically not subject to city regulations. - 2: MAP AND DISTRICTS 2.4: DISTRICT DEVELOPMENT STANDARDS Beaufort, South Carolina, The Beaufort Development Code    Created: 2023‐12‐08 08:25:04 [EST] (Supp. No. 1) Page 10 of 73 2.4: DISTRICT DEVELOPMENT STANDARDS 2.4.1 TRANSECT-BASED DISTRICT STANDARDS DISTRICT T3-S T3-N T4-HN T4-N T5-DC T5-UC A. LOT CONFIGURATION 1. Lot Width at Front Setback 75 60ft min; for waterfront lots see Section 2.5.4 40 ft min, 60 ft min in the Hundred Pines neighborhood 40 ft min, 60 ft min in The Point n/a n/a n/a 2. Lot Size 69,000 sf min; for waterfront lots see Section 2.5.4 4,000 sf min; 3,000 sf min for alley- served lots 4,000 sf min; 6,000 sf min in The Point n/a n/a n/a 3. Maximum Lot Coverage1 3045% of lot area 45% of lot area 55% of lot area 70% of lot area 100% 1090% 4. Frontage Build-Out2 n/a n/a 75% max 60% min; 85% max 75% min 7560% min 1 This percentage indicates maximum lot coverage by roofs; total impervious coverage may be an additional 10%. Parcels may also be subject to Section 8.3 (Stormwater). 2 See Section 2.5.1 B. for addition al frontage build-out standards. 3. Lots located in the historic district, will be subject to the Historic Review Board approval process of 9.9.2 D. B. PRIMARY BUILDING PLACEMENT 1. Front Setback; for infill lots also see Section 2.5.2 20 ft min 15 ft min Average Prevailing Setback on Block 0 ft min 0 ft min 0 ft min No max 30 ft max3 15 ft max Max. Prevailing Setback on Block 15 ft max 2. Side Setback— Corner/Alley 15 ft min 6 ft min 5 ft min 0 ft min 0 ft min 0 ft min No max No max No max 10 ft max 15 ft max 15 ft max    Created: 2023‐12‐08 08:25:04 [EST] (Supp. No. 1) Page 11 of 73 3. Side Setback— Interior 10 ft min 6 ft min 6 ft min, 10 ft min in The Point 5 ft min, or 0 ft if attached 0 ft min 0 ft min 4. Rear Setback4 15 ft min 15 ft min 15 ft min 10 ft min 0 ft min 5 ft min 5. Rear Setback from Alley 4 n/a 0 ft 0 ft 0 ft 0 ft 0 ft 6. Attached Garage/Carport Setback (from front facade)5, 6 5 ft min 5 ft min Attached garages shall only be accessed via an alley; garage doors shall not face the street C. ACCESSORY BUILDING PLACEMENT—See Se ction 3.11 for additional requirements 1. Front Setback Accessory structures shall be located behind the front facade of the primary structure, except as provided for in Section 2.5.4 (Waterfront Lots) and Section 4.5.3 (Carriage House); see item 6 below for setback for detached garage doors 2. Side Setback— Corner/Alley5 5 ft min 5 ft min 5 ft min 3 ft min 0 ft min 0 ft min 3. Side Setback— Interior 5 ft min 5 ft min 5 ft min 5 ft min 0 ft min 0 ft min 4. Rear Setback 4 5 ft min 5 ft min 5 ft min 5 ft min 0 ft min 0 ft min 5. Rear Setback from Alley4 3 ft min 3 ft min 3 ft min 3 ft min 3 ft min 3 ft min 6. Detached Garage Door/Carport Setback (from front facade)5 5 ft min 205 ft min 205 ft min 20 ft min Shall be located behind primary building and accessed via alley or side street7 3 When lot width is 75 ft or greater, there is no maximum front setback. 4 Garage doors shall be 15 ft min from alley centerline. 5 In addition to the setback requirements listed ab ove, garage doors/carports which face a public right-of-way, except for rear alleys, shall be set back a minimum of 20 ft from that right-of-way. 6 The Battery Shores and Islands of Beaufort neig hborhoods are exempt from this standard when garage doors do not face a public right-of-way. In the Jericho Woods neighborhood, carports are exempt from this standard. 7 Also see Section 2.5.7(Street Access Standards). D. BUILDING FORM 1. Primary Building Height— See Section 2.6 No min No min No min 2 stories min 8 2 stories min 2 stories min 8 2.5 stories max 2.5 stories max 3 stories max 4 stories max; 3.5 3 stories max at 5 stories max; 3.5    Created: 2023‐12‐08 08:25:04 [EST] (Supp. No. 1) Page 12 of 73 stories max in & fronting Historic District & interior lots along Allison Rd. property line, see 2.6.1.G stories max in & fronting Historic District 2. Accessory Building Height 2 stories or 30 ft max 2 stories or 30 ft max 2 stories or 30 ft max 2 stories or 30 ft max 2 stories max or 30 ft max 2 stories max or 30 ft max 3. Building Width at Frontage n/a n/a n/a 100 ft max 100 ft max9 160 ft max9 8 Two stories are only required at significant intersections, in accordance with Section 2.6.3 and the Street Hierarchy Diagram in Appendix C.3. 9 Buildings exceeding this maximum shall comply with the Large Footprint Building standards in Section 4.5.10. E. PARKING PAD LOCATION—There are no interior side setbacks for parking unless buffers are required per Section 5.5. See Section 2.5.8 for additional provisions 1. Front Setback There are no parking setbacks, however, driveways shall be located to the side of the lot/primary structure except on waterfront lots meeting the conditions stated in 2.5.4. 40 ft min 40 ft min 40 ft min 40 ft min 2. Side Setback— Corner 5 ft min 15 ft min 5 ft min 5 ft min 3. Rear Setback 5 ft min 5 ft min 0 ft min 0 ft min LOT CONFIGURATION (2.4.1.A)    Created: 2023‐12‐08 08:25:04 [EST] (Supp. No. 1) Page 13 of 73 BUILDING PLACEMENT (2.4.1.B—C) BUILDING FORM (2.4.1.D) PARKING LOCATION (2.4.1.E) 2.4.2 CONVENTIONAL DISTRICT STANDARDS General standards for development in the Regional Mixed-Use (RMX), Light Industrial (LI), Institutional & Campus (IC), and Manufactured Home Park (MH) districts are outlined in the table below. Land designated as Military Reservation (MR) district is under the jurisdiction of the federal government; the City has no development standards for these lands. DISTRICT RMX IC LI MH MR A. RESIDENTIAL DENSITY1 1. Residential Units/Acre 30 units/acre max 30 units/acre max n/a 7 units/acre max Exempt B. LOT SIZE & BUILDING FORM    Created: 2023‐12‐08 08:25:04 [EST] (Supp. No. 1) Page 14 of 73 1. Minimum Lot Width2 60 ft min 50 ft min 50 ft min 150 ft min Exempt 2. Lot Size 2 6,000 sf min 5,000 sf min 10,000 sf min 5 acres 3. Impervious Surface Coverage 65% max 65% max N/A N/A 4. Building Height 4 stories 4 stories 4 stories3 2 stories 1 Measured as gross density—calculation of acreag e includes land occupied by rights-of-way, parks, open space, and other non-residential uses. 2 Where properties are accessed via a rear alley or lane, this standard may be decreased by 25%. 3 In industrial parks larger than 50 acres, the height limit is permitted to increase to 10 stories unless otherwise restricted by the AICUZ. C. PRINCIPAL BUILDING PLACEMENT4 1. Front Set- back - Primary 10 ft min 10 ft min 15 ft min 25 ft min Exempt 60 ft max5 Max setback shall not exceed average max setback on same side of block; build-to line of adjacent T- zone shall also be considered n/a n/a 2. Side Setback - Corner 10 ft min 5 ft min; max setback shall not exceed average setback on same side of block; build-to line of adjacent T- zone shall also be considered 15 ft min 15 ft min 3. Side Setback - Interior 10 ft min; 15 ft min when abutting any Transect- based district 10 ft min; 25 ft min when abutting T3 districts 0 ft min 25 ft min when abutting other districts 15 ft min 4. Rear Setback 15 ft min 25 ft min 10 ft min 25 ft min when 15 ft min    Created: 2023‐12‐08 08:25:04 [EST] (Supp. No. 1) Page 15 of 73 abutting other districts 4 See Section 5.5.1 for additi onal buffer requirements. 5 When corridor buffer requirements - Section 5.5. 1 B. - are required, the maximum front setback may be increased to no greater than 50 feet behind the buffer. D. ACCESSORY BUILDING PLACEMENT6 1. Side Setback - Corner 10 ft min 10 ft min 10 ft min 10 ft min Exempt 2. Side Setback - Interior 5 ft min 5 ft min 0 ft min 25 ft min when abutting other districts 5 ft min 3. Rear Setback 5 ft min 5 ft min 10 ft min 25 ft min when abutting other districts 5 ft min 6 Also see Accessory Uses & Structures in Section 3.11 E. PARKING LOCATION 1. Parking Location Parking areas and drive aisles shall be located in the side or rear yard whenever possible. Parking areas and drive aisles shall not be located within the front setback, but may be placed in front of the building. However head-in rows of parking shall not be permitted to front Primary Streets. Diagonal rows of parking shall not front Primary Streets except as part of a slip or frontage-road design, or when there are less than 10 consecutive spaces. Where 10 or more parking spaces are required, the majority of the parking shall be located in the side or rear of the building. n/a n/a Exempt 2.5: GENERAL LOT STANDARDS    Created: 2023‐12‐08 08:25:05 [EST] (Supp. No. 1) Page 16 of 73 2.5.1 BUILDING PLACEMENT AND ORIENTATION A. Frontage and Orientation on Street: All buildings shall front a street right-of-way, and have a usable entrance on the Primary Frontage with the following conditions and exceptions: 1. Multi-Building Sites: a. Buildings shall be located to break up the site into a series of smaller blocks defined by streets and pedestrian walkways, and to frame and enclose parking areas, outdoor dining areas, and/or gathering spaces for pedestrians between buildings. b. Perimeter buildings and outparcels shall be configured and located to define street edges, development entry points, and spaces for gathering between buildings. c. Perimeter buildings shall be oriented so that the primary facade(s) faces a public street and has a usable entry on that street. Buildings that are interior to a lot that has buildings that otherwise meet the frontage requirement may have entrances that do not face the Primary Frontage.    Created: 2023‐12‐08 08:25:05 [EST] (Supp. No. 1) Page 17 of 73 2. Live/Work Buildings: Where such buildings are permitted, the entrance to the commercial space shall face the Primary Frontage. However, the entrance to the residential space may be located on the side or rear. 3. Utility and Conservation Lots: Lots platted for the sole purposes of being sites for public utilities (e.g., water, sewer, electric, stormwater) or as conservation areas shall not be required to abut a dedicated public street. Adequate access by easement shall be provided. Buildings associated with utilities shall meet the building standards and guidelines of the zoning district. 4. Lots May Front on Civic or Open Space: Lots shall be permitted to front on a civic or open space as defined in Section 7.4.3. B. Frontage Build-Out: 1. Facades shall be built parallel to the principal frontage line or to the tangent of a curved principal frontage line, and along a minimum percentage of the frontage width at the setback, as specified in Sections 2.4.1 A.4. and Section 4.4 (Private Frontage Type). a. Exceptions: i. Exceptions may be granted by the Administrator where the parcel has an irregular configuration, utility easements or legal constraints which prevent compliance, or if building is sited to take advantage of specific topographical and natural characteristics. ii. This provision does not apply in T3-S, IC or LI zoning districts. 2. Front facades shall front public streets or rights-of-way. In the case where buildings front multiple streets, or desire to have entrances facing the parking lot, multiple front facades may be designed. 3. For parcels that may contain multiple structures in different phases, an overall Illustrative Sketch, showing proposed building locations and site circulation, shall be prepared to ensure that the frontage build-out is being met as closely as possible. These parcels will not be required to be built out all at once, and may be phased over time. The Illustrative Sketch is subject to future modifications as long as the intent of this standard continues to be met—this will be evaluated by the Design Review Authority as each individual project phases are designed. 4. Pedestrian-use areas (such as plazas, courtyards, and sidewalk cafes) within the minimum and maximum front setbacks are exempt from the frontage build-out when all of the following conditions are met:    Created: 2023‐12‐08 08:25:05 [EST] (Supp. No. 1) Page 18 of 73 a. The existing sidewalk is less than 8' wide. b. The primary facade is within 10' of the build-to line. c. One of the appropriat e frontage types (see Section 4.4) is utilized. 5. Where rear access is not possible, driveways ar e also exempt from this requirement, and their width may be subtracted from the total lot width to determine the build-out percentage. C. Corner Lots: 1. Buildings located at street intersections shall place the primary building, or part of the building, at the corner; however, gathering spaces may be appropriate at corners of larger developments. 2. Parking shall not be located between the building and the Primary Street(s). D. Pedestrian Entries from Frontage Line:    Created: 2023‐12‐08 08:25:05 [EST] (Supp. No. 1) Page 19 of 73 1. Buildings shall have their principal pedestrian entrances on a frontage line. 2. All buildings with shared entrances shall be oriented so that the primary entrance(s) face(s) the street. 3. In the case of corner lots, the primary entrance(s) shall face the street from which the building derives its street address. 4. In the T4 and T5 zones, blank facades are not permitted. Multiple pedestrian entrances for public access shall be provided every 50 feet, or more frequently. The Design Review Authority may modify the spacing of the entrances based on the amount of glazing, interior layout, and general design of the structure. E. Frontage Types: The private frontage of the building shall comply with the standards laid out in Section 4.4 (Private Frontage Type). F. Building Types: More specific standards may apply based on a specific building type (Section 4.5). 2.5.2 INFILL LOT STANDARDS A. The minimum setbacks required may be reduced for infill lots where existing development on the block does not match the current standards in Section 2.4.1. Setbacks for such lots shall either match an existing adjacent setback or use the calculated average setback of the adjacent lots. B. Special Conditions: 1. Islands of Beaufort neighborhood: Side Setback for T3-S is reduced to 10 feet. 2. Battery Shores neighborhood: Side Setback for T3-S is reduced to 10 feet. 3. Battery Point neighborhood: Rear Setb ack for T3-N is reduced to 10 feet. 4. T3-N parcels between Fuller Parkway and Ribaut Road, bound by Stuart Street on the North and Barnwell Avenue on the south: a. For lots with frontage onto both Fuller Parkway and Ribaut Road, subdivision shall not add new driveways onto Ribaut Road. No new lot may be created without either: i. A new rear lane created to provide rear access to parcels fronting Ribaut Road; or    Created: 2023‐12‐08 08:25:05 [EST] (Supp. No. 1) Page 20 of 73 ii. An access easement from Fuller Street. 2.5.3 WATER-ORIENTED FACILITIES Water-oriented facilities such as docks, marinas, boat houses, etc., shall be allowed to encroach into required setback areas along shorelines and into rivers, lakes, streams and other waterways. See Section 3.7.1 F. and 8.2 for more details on these structures and facilities. 2.5.4 WATERFRONT LOTS A. Attached Garages: Notwithstanding the requirements for Attached Garages in Section 2.4.1 CB.6., such structures associated with residential dwellings may be placed in front of the principal building elevation, if all of the following conditions are met: 1. The upper level(s) shall contain habitable space. 2. The frontage requirement in Section 4.4 is met. B. Accessory Structures: Notwithstanding the requirements for Accessory Structures in Section 2.4.1 C.6., such structures associated with residential dwellings may be placed in front of the principal building elevation, if all of the following conditions are met: 1. Structures shall meet the typical front and/or side setback requirements. 2. Garage doors shall be oriented perpendicular to the public right-of-way to minimize visibility. 3. Structures shall be compatible with the primary dwelling unit in architectural details including color, siding, roof pitch, window detailing, siding materials, roof materials and foundation. C. Critical Area Buffer: As required by Section 8.2. D. Special Lot Requirements: 1. Specific to T3-S - Lot Width, Depth, and Area: a. The minimum lot width at the setback line for waterfront lots shall be 100 feet. b. The minimum lot depth for waterfront lots shall be 125 feet. 2. Specific to T3-N: The front setback requirement for waterfront lots may be met with an accessory structure. 3. Subdivision of Waterfront Lots: Waterfront lots that exceed the minimum lot depth requirements, and are larger than 350 feet deep and 18,000 square feet, may be subdivided into two lots - one fronting the water and one fronting the right-of-way provided both lots conform with the applicable requirements of this Code. In such instances, the following standards apply: a. Lot Access: Access to the water-fronting lot shall be maintained through a minimum 20- foot access easement or right-of-way across the street-fronting lot. Alternatively, access may be provided via a side street, or an alley through the entire block. Access shall meet the minimum fire apparatus access road requirements as outlined in the International Fire Code. b. Lot Dimensions: The new lot(s) fronting the street shall meet the standards for T3-N.    Created: 2023‐12‐08 08:25:05 [EST] (Supp. No. 1) Page 21 of 73 2.5.5 IRREGULAR LOT CONDITIONS A. Irregular Lot Lines: Generally, side lot lines shall be perpendicular or radial to the street right-of-way, and rear lines should be approximately parallel to fronting right-of-way lines. Irregularly shaped lots shall be permitted at the discretion of the Administrator when unique site conditions exist. B. Irregular Lot Setbacks: The location of required front, side, and rear yards (or setbacks) on irregularly shaped lots shall be determined by the Administrator, based on the prevailing spacing of buildings on the adjacent parcels. Where questions arise as to appropriateness, the applicant may be requested to provide additional design information. C. Double- and Triple-Frontage Lots: On lots with two street frontages, not located at a corner, or with three frontages and located at a corner, the front setback will apply to both the street that the building derives its address from, in addition to the opposite, parallel street. The setbacks for accessory structures will be reduced to half the front setback, however the provisions for garage doors in 2.4.1.C.6 still apply. This does not apply to lots located on a corner with a rear alley. D. Flag Lots: 1. The front setback on flag lots shall be measured from the front property line within the main building site as opposed to the property line adjoining the public right-of-way. 2. Flag lots may be permitted by the Metropolitan Planning Commission in major subdivisions as part of the subdivision review process, if the lot has an access strip with a minimum width of 20' serving the main building site of the property. 23. Flag lots shall be permitted, using the process for Administrative Adjustment (Section 9.12), or by the Planning Commission for major subdivision, if all of the following conditions apply: a. Connectivity and circulation via a network of streets, alleys, pathways, etc. will be maintained. b. There is no reasonable alternative, due to extreme topographic conditions or other physical condition. c. The lot has an access strip with a minimum width of 20 feet serving the main building site of the property. The front setback on flag lots shall be measured from the front property    Created: 2023‐12‐08 08:25:05 [EST] (Supp. No. 1) Page 22 of 73 line within the main building site, as opposed to the property line adjoining the public right- of-way. d. For waterfront lots, standards from Section 2.5.4 shall also be met. 34. Flag lot access shall meet the minimum fire apparatus access road requirements as outlined in the International Fire Code. 2.5.6 ENCROACHMENTS The features listed below shall be permitted to encroach into a required yard or right-of-way, as applicable. A. Encroachments over Sidewalks: With approval of the City, county or SCDOT (whichever has authority over a street), awnings, arcades, canopies, and galleries (See Section 4.4), may encroach over the sidewalk to within 2 feet of the curb, but they shall provide a vertical clearance of at least 8 feet from any sidewalk. B. Upper Story Encroachments: Bay windows, balconies, and similar features projecting from the principal building may encroach up to 50% of the depth of the front and street side setback. With approval of the City, county or SCDOT (whichever has authority over a street), upper-story balconies or bay windows may encroach over the right-of-way a maximum of 3 feet, but they shall provide a vertical clearance of at least 8 feet from any sidewalk. C. Lower Story Encroachments: Cornices, eave overhangs, chimneys, flues, bay windows, and similar projections (including gutters) may encroach up to 2 feet into any required yard. D. Covered Porches: Covered porches may encroach a maximum of 8 feet into any required front yard or street side yard setback and to within 5 feet of any interior side or rear yard property line. E. Uncovered Porches, Decks, Patios, Steps and Stairs: Uncovered and unenclosed porches, decks, patios, steps and stairs, and other similar features may encroach to within 5 feet of any interior side and rear property line. Steps and stairs may encroach up to 100% of the depth of any required street yard setback, but may not encroach upon any public sidewalk. F. Walkways, and Driveways: Uncovered and unenclosed walkways, and driveways may encroach up to 100% of the depth of any required setback, unless a buffer, per Section 5.5.1, is required. G. Handicapped Ramps: Ramps for handicap accessibility and fire escapes that are required by the "Accessibility Code" may encroach into any required yard but may not be closer to any property line than 5 feet. Such features shall not be located in a front yard if it is possible to accommodate them in a side or rear yard. H. Fences and Garden Walls: Fences and garden/yard walls may encroach into required setbacks. The support structures for fences shall be located on the inside of the fence, and no fence, wall or hedge shall exceed the following dimensions: 1. Front or Street Side Setback: Four feet in height, with the following exceptions: a. On T3 lots that front Ribaut Road, fences may be permitted to be 7 feet in height on the condition that such fences are set back from the front property line 1 foot for every 1 foot increase in height above 4 feet. b. In the LI District, parcels fronti ng a Primary Street may have fences or walls up to 6 feet in height. Parcels fronting all other streets may be up to 10 feet in height. c. Electric fences are not permitted to encroa ch into any front or street side setbacks. 2. Interior Side or Rear Setback of a Transect-Based District: 6 feet in height. Formatted: List 2    Created: 2023‐12‐08 08:25:05 [EST] (Supp. No. 1) Page 23 of 73 3. Interior Side or Rear Setback of a Conventional District: 8 feet in height. 4. Interior Side or Rear Setback of LI District: 10 feet in height. I. Mailboxes: Mailboxes may encroach into a front setback area. The following standards apply: 1. In the Historic District, freestanding mailboxes are not permitted. Mailboxes shall be attached to a fence or the structure itself. 2. When grouped or ganged mailboxes are required as part of a new development, a structure shall be provided to house the individual units. The structure may encroach into a typical front or side setback. The structure shall be included in the site plan and the design shall be approved by the appropriate Design Review Body. J. HVAC: HVAC units may encroach up to 3 feet into a required side or rear setback. 2.5.7 STREET ACCESS STANDARDS A. Access to Lots from Alleys/Rear Lanes: 1. Lots served by alleys shall access garages and/or off-street parking areas from the alley, and shall not have driveways in front or corner side yard areas. 2. Requirements for alley locations can be found in Section 7.2.3. B. Avoid Double-Frontage and Reverse-Frontage Lots: 1. New double-frontage and/or reverse-frontage lots (lots with street frontage on opposite sides of the lot) are prohibited. The Design Review Authority may permit them on a case-by-cases basis if they are unavoidable due to existing topographical or environmental conditions. 2. To encourage the subdivision of existing double-frontage residential lots into two single-frontage residential lots, the minimum lot size for such lots may be reduced to 75% of the minimum lot size for the district, as established in Section 2.4. 2.5.8 EXCEPTIONS TO SECTION 2.4.1 E.—PARKING LOCATION A. The provisions shall not apply to cars parked on front-loaded driveways. B. Where lot depth is less than 60' deep, the Administrator shall evaluate this requirement on a case-by- case basis. In no case shall parking be located in front of a building in T4 and T5 zoning districts. C. Where lots have frontage on more than one Primary Street and build-out on one of the streets is planned to be phased, per Section 2.5.1 B.3., parking may be permitted within the parking setback, provided it doesn't prevent or preclude future build-out of the overall master plan for the parcel. Screening is still required per Section 5.7.8. 2.5.9 LOT DIVERSITY: a. Applicability: only required in the T-4 N, RMX districts. b. Mix of housing required. A mix of permitted housing types shall be included in any individual development plan, to the extent reasonably feasible, depending on the size of the parcel. In order to promote such variety, the following minimum standards shall be met: Formatted: Font: 12 pt, Bold Formatted: Font: 12 pt, Bold, Not Italic Formatted: Font: 12 pt, Bold Formatted: Indent: Left: 0.25"    Created: 2023‐12‐08 08:25:05 [EST] (Supp. No. 1) Page 24 of 73 i. A minimum of two housing diversity types shall be required in residential developments containing 5 acres or more, including such plans that are part of a phased overall development; ii. A minimum of three housing diversity types shall be required in residential developments containing more than 10 acres, including such plans that are part of a phased overall development; iii. A minimum of four housing diversity types shall be required in residential developments containing more than 20 acres, including such plans that are part of a phased overall development. c. To the maximum extent feasible, housing types, block dimensions, garage placement, lot sizes and lot dimensions shall be significantly and substantially varied to avoid repetitive rows of housing and monotonous streetscapes. For example, providing distinct single-family detached dwellings or two-family dwellings on larger lots and on corners and providing small lot single-family dwellings on smaller lots abutting common open spaces fronting on streets are methods that accomplish the lot diversity requirements set forth in this subsection i. In addition, diversity and density is to be spread within developments in a harmonious fashion and not located in one area. Disconnected areas of density or different lot and uses will not be permitted. d. The following list provides housing diversity types constitute one diversity type to satisfy this Lot Diversity requirement. i. T-4 N only: Single-family detached dwellings with rear loaded garages. ii. T-4 N only: Single-family detached dwellings with front or side loaded garages. iii. T-4 N only: Small lot single-family detached dwellings (i.e. lots containing less than 4,000 square feet or with lot frontages of 40 feet or less) may be used to satisfy the lot diversity requirements if: 1) there is a difference of at least 2,000 square feet between the average lot size for small lot single- family detached dwellings (insert that average size) and 2) the average lot size for single-family detached dwellings with front or side loaded garages iv. T-4 N only: Two-family dwellings and Single-family attached dwellings. v. Townhouses and rowhouses. vi. Mixed-use buildings. vii. Multi-family dwellings containing no more than three to four units per building; viii. Multi-family dwellings containing five to seven units per building. ix. Multi-family dwellings containing more than seven units per building (limited to 12 dwelling units per building). x. Commercial buildings, including liner buildings, and large footprint buildings. xii. Civic Buildings 2.6: HEIGHT Building heights by district, as specified in Section 2.4.1, shall be determined according to the provisions below. 2.6.1 MEASUREMENT OF BUILDING HEIGHT A. Building height is measured as the number of stories (syn. floors) in a building. A story is a habitable level in a building of no more than 15 feet in height from finished floor to finished ceiling. Each full story above the ground floor shall be a minimum of 8 feet from floor to ceiling. Formatted: Indent: Left: 0.5" Formatted: Indent: Left: 0.5" Formatted: Indent: Left: 0.5" Formatted: List Paragraph, Numbered + Level: 1 + Numbering Style: a, b, c, … + Start at: 3 + Alignment: Left + Aligned at: 0.25" + Indent at: 0.5"Formatted: Indent: Left: 0.5" Formatted: List Paragraph, Numbered + Level: 1 + Numbering Style: i, ii, iii, … + Start at: 1 + Alignment: Left + Aligned at: 0.25" + Indent at: 0.75"Formatted: Indent: First line: 0.25"    Created: 2023‐12‐08 08:25:05 [EST] (Supp. No. 1) Page 25 of 73 B. Where a maximum height is also provided in feet, that height shall be taken from the average sidewalk or site grade at the front facade of the building to the mean roof height or top of the parapet. Where the building is located in a flood zone, the height shall be taken from the first finished floor above the base flood elevation. C. Under-roof areas with dormers shall be counted as half-stories. D. Mezzanines shall be counted as stories, unless they are within a floor-to-ceiling volume that is no more than 15 feet in height. E. Unoccupied attics less than 7 feet in height to the ridge beam or collar tie (whichever is lower) and raised basements less than 6 feet above the adjacent grade shall not be calculated as stories. F. Certain buildings (such as gymnasiums, religious institutions, theatres, etc.) may require finished floor- to-ceiling heights greater than 15 feet. In such instances, the number of stories shall be calculated as the finished floor-to-ceiling height (in feet) divided by 15. Any fractions of a story shall be rounded up to the next whole number, with the following exception: 1. Specific to T5-UC: The maximum first floor height for such buildings shall be 24'. G. Specific to T5-DC: The maximum height at the property line shall be 3 stories, and the maximum height 15 feet behind the property line, or front line of the building, shall be 4 stories. 2.6.2 BUILDING HEIGHT ABOVE GRADE A. General to All Zones: 1. 1. Freeboard: In addition to the standards listed below, where a parcel is located in a flood-hazard zone, the minimum elevation above grade is 1 foot above base flood elevation. . In special flood hazard areas (zones A, AE, AH, AO, A1-30, V and VE) and other areas with the potential of flooding (such as x and shaded x zones) where base flood elevation data has been provided by FEMA Flood Insurance Maps, the following provisions are required: New Construction, substantial improvement, or an addition, including an addition to a historic structure, the footprint of which is over thirty-three (33) percent of the footprint of existing structure, shall have the lowest floor elevated to the most restrictive of the design elevation of 13 feet or the base flood elevation plus one foot of freeboard. No basements are permitted. Should solid foundation perimeter walls be used to elevate a structure, openings sufficient to facilitate the unimpeded movements of floodwaters shall be provided in accordance with national flood insurance program. 2. Exception: Commercial buildings that have been floodproofed, per ASCE Section 24 or most recent version, do not have to be elevated above grade. B. Specific to T3 Zones: 1. If the finished floor of new single-family residential construction will be lower than the average grade along any property line, the finished floor must be elevated a minimum of 18" above finished grade adjacent to the building exterior. 2. The finished ground floor elevation for 2- and 3- unit buildings shall be elevated a minimum of 2 feet above the average adjacent sidewalk, or adjacent street grade where no sidewalk is present. 3. If a single-family residence in a T3 zone is developed as part of an Alternative Development Pattern (Section 2.8), it shall be elevated a minimum of 18" above the average adjacent sidewalk grade or adjacent street grade where no sidewalk is present.    Created: 2023‐12‐08 08:25:05 [EST] (Supp. No. 1) Page 26 of 73 C. Specific to T4 Zones: 1. The finished ground floor height for residential structures shall be elevated a minimum of 2 feet above the average adjacent sidewalk grade or adjacent street grade where no sidewalk is present. Apartment Houses are permitted to be a minimum of 18" above grade, per Section 4.5.7. 2. The ground floor height of single-family residential structures shall be a minimum of 9 feet from finished floor to ceiling. 3. The ground floor height of multi-family residential structures shall be a minimum of 10 feet from finished floor to ceiling. 4. The ground floor height of commercial buildings shall be a minimum of 11 feet from finished floor to ceiling. 5. Each full story above the ground floor shall be a minimum of 8 feet from floor to ceiling. D. Specific to T5 Zones: 1. The finished ground floor height for residential structures shall be elevated a minimum of 3 feet above the average adjacent sidewalk grade. Apartment Houses are permitted to be a minimum of 18" above grade, per Section 4.5.7. 2. The ground floor height of residential structures shall be a minimum of 10 feet from finished floor to ceiling. 3. The ground floor height of single-story commercial buildings shall be a minimum of 14 feet from finished floor to ceiling. 4. The ground floor height of multi-story commercial buildings shall be a minimum of 12 feet from finished floor to ceiling. 5. In T5-DC, the Historic Review Board may permit deviations from the minimum height requirements listed above if doing so would allow a structure to be more compatible with the surrounding context. 6. Each full story above the ground floor shall be a minimum of 8 feet from floor to ceiling. 2.6.3 TWO-STORY HEIGHT REQUIREMENTS Specific to Zones T4-N and T5-UC: Two-story buildings are required within 250 feet of any Significant Intersection (see Street Hierarchy Diagram in Appendix C.3) as measured from the centerline of the intersection. Any parcel that is partially within the 250-foot radius will be required to comply with the two-story height requirements. Where a two-story minimum building height is required, the following configurations are permitted in addition to a typical two-story building with habitable space on each level: A. Two-Story Mass: This can be an open, double-height structure with a minimum building height of 24 feet. The second floor does not need to be built out or habitable. B. Mezzanine: The intent of mezzanines is to provide upper-level activity along street facades. Mezzanines shall meet the following conditions: 1. All buildings shall include a minimum massing of two stories extending fully along all street- fronting facades and any facade that is visible from a corner. If a building cannot meet this standard through the use of a mezzanine, then the mezzanine will not be permitted to fulfill the two-story requirement.    Created: 2023‐12‐08 08:25:05 [EST] (Supp. No. 1) Page 27 of 73 2. Mezzanines shall be located on the Primary Facade(s) of a building. 3. A mezzanine shall be designed as usable primary interior floor space, not storage or other secondary, mechanical, or service functions. 4. All mezzanine floor space shall be located in direct contact with street-fronting second-floor windows and is required to meet all of the window transparency requirements of a second floor. 5. When being used to satisfy a two-story building height requirement, a mezzanine level shall meet all ceiling height standards of a second floor. 2.6.4 DIMENSIONAL HEIGHT STANDARDS Height requirements for signs, lighting, landscape screens, and all other structures or objects for which a dimensional height requirement is established by this Code shall be measured as the vertical distance from the average sidewalk or site grade at the structure or object's foundation to its highest point. 2.6.5 ITEMS NOT INCLUDED IN HEIGHT CALCULATIONS The height limitations of this Code shall not apply to church spires, belfries, cupolas and domes not intended for human occupancy, monuments, water towers, mechanical penthouses (provided they are set back 20 feet from the front elevation), observation towers, transmission towers, chimneys, smokestacks, conveyors, flagpoles, masts and antennas (provided evidence from appropriate authorities is submitted to the effect that such building or buildings will not interfere with any airport zones or flight patterns). The Design Review Authority may adjust the 20-foot setback on a case-by-case basis 2.6.6 HEIGHT TRANSITION. Any portion of a building located within the T-4, T-4N, T5-UC, or RMX District, shall have a maximum height no greater than the maximum height allowed in the adjacent zoning district for a 75 foot distance beginning at the zone district boundary line. Where a street separates the zoning districts, the 75 foot distance measurement shall be from the street right-of-way line opposite the T-4, T-4N, T5-UC, or RMX District Formatted: Font: Bold    Created: 2023‐12‐08 08:25:05 [EST] (Supp. No. 1) Page 28 of 73 2.7: OVERLAY DISTRICT STANDARDS Certain areas of the City may fall into one or more of the following overlay districts. When a property is newly assigned, reassigned, or annexed into one of these districts, the owner shall be required to formally acknowledge that they are within such district by signing a notification form, provided by the City and recorded at the Beaufort County Register of Deeds Office. Formatted: Heading 2    Created: 2023‐12‐08 08:25:05 [EST] (Supp. No. 1) Page 29 of 73 2.7.1 BEAUFORT HISTORIC DISTRICT (HD) OVERLAY A. Purpose: The purpose of the Beaufort Historic District is to promote the educational, cultural, and general welfare of the public through the preservation, protection, and enhancement of the old, historic or architecturally significant structures and areas of the City and to maintain such structures and areas as visible reminders of the history and cultural heritage of the City, the state, and the nation. The Historic District is a pedestrian-oriented area. B. Applicability: Properties within the Beaufort Historic District are subject to specific standards found in this section, and to the review procedures of the Historic District Review Board as described in Section 10.7. C. Beaufort Historic District Designated: For the purpose of this section, the Beaufort Historic District is hereby established. The boundaries of this district shall be designated on the official Zoning Map of the City of Beaufort. The boundaries of the Beaufort Historic District and the Beaufort National Historic Landmark District are the same with the following clarifications/exceptions: 1. Where boundaries are designated at specific roads, the centerlines of the rights-of-way of those roads shall be deemed said boundaries. 2. The east and south boundaries of the district are established at the Beaufort River. These boundaries are established at the parcel lines, seawalls, or at mean high water mark, whichever extends further from the high ground. 3. Structures attached to the high ground are deemed to lie within the district and shall be reviewed in entirety in accordance with the provisions of this section.    Created: 2023‐12‐08 08:25:05 [EST] (Supp. No. 1) Page 30 of 73 D. Subdistricts Established: The Beaufort Historic District shall be composed of 2 subdistricts identified as the Beaufort Preservation Neighborhood (BPN) and the Beaufort Conservation Neighborhood (BCN). There may be established one or more of each subdistrict within the Beaufort Historic District, provided that all such districts shall consist of at least five acres of contiguous land. The boundaries of these subdistricts shall be designated on the official Zoning Map of the City of Beaufort. Where the term Beaufort Historic District (or a similar reference, such as "historic district") is used in this section or in any supplementary materials, it shall apply to both subdistricts. However, where there is a specific reference to a subdistrict, that specific reference shall apply and supersede any reference to the Beaufort Historic District. E. Trash and Recycling Screening: All private trash and recycling receptacles shall be hidden or screened from view. Unscreened facilities shall come into compliance with the provisions of this section within 18 months of adoption of this Code. F. Exemptions: 1. The Bladen Street Redevelopment Dist rict overlay zone is exempted from Historic District Overlay standards (See Section 2.7.3 F.). 2. Routine maintenance and repair of any of the existing features of a structure that does not involve a change in design, type of materials, or outward appearance shall be exempt from the review and approval requirements of this section.    Created: 2023‐12‐08 08:25:06 [EST] (Supp. No. 1) Page 31 of 73 2.7.2 RETAIL FRONTAGE OVERLAY A. Purpose and Intent: In certain districts, it is desirable to maintain a residential character while permitting mixed uses to occur in buildings that front designated streets. B. Certain Commercial Permitted: Where a block face is designated on the Zoning Map as a retail frontage overlay, the building with direct access to the designated fronting street is permitted to be occupied by certain additional commercial uses, as indicated in the Table of Permitted Uses in Section 3.2. C. Designation: Retail frontage overlays are designated on the Zoning Map by a dashed line, as indicated in the map key.    Created: 2023‐12‐08 08:25:06 [EST] (Supp. No. 1) Page 32 of 73 2.7.3 REDEVELOPMENT DISTRICT OVERLAYS A. Purpose and Intent: The City hereby finds that it is necessary to create certain districts to encourage redevelopment in specific areas. These districts are based upon traditional standards for City buildings, derived from the existing conditions in the City and from a number of sources in planning literature - See Appendix B.1.1. B. Applicability: All parcels designated "redevelopment district" as indicated on the Zoning Map shall be subject to these provisions. C. Application of Standards: The majority of standards for the existing Redevelopment Districts - Boundary Street and Bladen Street - have been incorporated into the body of the Code. However, where special standards apply for the district, they are listed in this section. In the case of conflict between the standards set forth in the redevelopment districts and any other local land development regulation, these standards shall apply. D. Administration: Interpretation of all standards in the redevelopment districts - both architectural and streetscape standards - shall be the responsibility of the Administrator (syn. City Architect). See Section 9.8.2 5.b. for the approval and appeal processes. E. Parking Requirements: 1. Parcels ½ acre and smaller: Th ere are no parking requirements. 2. Parcels greater than ½ acre: one park ing space for every 1,000 square feet of leasable or saleable building area is required.    Created: 2023‐12‐08 08:25:06 [EST] (Supp. No. 1) Page 33 of 73 3. Location: These parking spaces may be located either on-site, on-street (along property frontage and/or directly across the street), in shared parking situations, or in any public parking facility, the closest outside edge of which facility is located no more than 500 feet from the entry to the proposed building. Documentation establishing the legal right for the applicant to use or share parking spaces shall be provided. 4. Parking Stall Sizes: He ad-in or diagonal spaces shall be a minimum of 9 feet x 18 feet. Parallel parking spaces shall be a minimum of 7 feet x 20 feet. 5. Drive Aisle Widths: Drive aisles in pa rking lots shall be 22 feet wide for two-way circulation and to provide adequate backup space for 90-degree head- in parking. Diagonal parking and parallel parking spaces may be accessed with one-way, 10 foot wide drive aisles. All parking lot dimensions are at the discretion of the Fire Marshal, based on evaluation of adequate fire apparatus access and industry-approved standard. F. Specific to the Bladen Street Redevelopment District: 1. Application of Standards: a. Redevelopment District is Exempted from Historic Overlay Standards: Construction of new structures and renovation or expansion of existing non- contributing structures not listed on the most recent "Above-Ground Survey of Historic Resources" within a designated redevelopment district shall be exempt from the standards of the historic overlay. b. Historic Structures: Demolition, renovation, or expansion of structures that are listed as "contributing" on the most recent "Above-Ground Survey of Historic Resources" shall be subject to approval by the HRB in accordance with Section 9.10.    Created: 2023‐12‐08 08:25:06 [EST] (Supp. No. 1) Page 34 of 73 2. Exceptions to Section 3.2 Table of Permitted Uses: Inns and Hotels are permitted by-right in this redevelopment district, and are not subject to the conditions in 3.6.2.C.3. 3. Street Hierarchy: The hierarchy of street s in this district is as follows, from highest to lowest: Bladen Street, North Street, Duke Street, Prince Street, Adventure Street. Bladen Street is the most important street in the redevelopment district. 4. Master Plan: See Appendix B.2.3 fo r the original Bladen Street Master Plan. G. Specific to the Boundary Street Redevelopment District: 1. Existing Planned Unit Developments : For existing City-approved planned unit developments (PUD) in the district, the PUD shall apply through February 6, 2032, a period of up to 25 years from the date of adoption of the Boundary Street Redevelopment District. Once 25 years pass, said PUDs are no longer applicable and shall then fall under the regulations of the Boundary Street Redevelopment District and underlying zoning. 2. Existing Buildings: With respect to existing buildings within the Redevelopment District, their use may be maintained despite changes made to allowable uses. In the event the building undergoes either structural or cosmetic modifications, if the cost of improvements exceeds 50% of the Fair Market Value of the building, it will be subject to the standards set forth by this code. This does not include repairs to a building, provided that the configuration is not modified or altered during the repairs. The Administrator (syn. City Architect) will have final jurisdiction over this matter. Signs not conforming to the requirements of this section shall be altered, removed, or otherwise brought into compliance with the requirements of this section at the time that the required building improvements are made. 3. Specific Standards:    Created: 2023‐12‐08 08:25:06 [EST] (Supp. No. 1) Page 35 of 73 a. Exceptions to Section 3.2 Table of Permitted Uses: Single-family detached uses are permitted regardless of the zoning district, except along Boundary Street and Robert Smalls Parkway. They are subject to all development standards laid out in this Code. b. Streets: All applications for development in the Boundary Street Redevelopment District shall include the design of street elements adjacent to the applicant's property. These designs shall be according to the street type adjacent to the property, as identified in the Street Regulating Plan (Appendix C). The street type and the appropriate thoroughfare sections inform the applicant regarding how parking, sidewalk, tree plantings and other elements are to be sized and arranged. Contact with the City architect will provide clarification about the required design for each street. All streets and alleys shall connect to other streets. Cul-de-sacs and T-turnarounds are not permitted. i. Street Hierarchy: The hierarchy of streets/street types in this district is as follows, from highest to lowest: Boundary Street (US 21), Ribaut Road, Robert Smalls Parkway (SC 170), Parallel Street, Edge Drive, Main Street, Park Street, Neighborhood Street, House Street. This hierarchy serves as an informal phasing and prioritization plan. ii. Construction of New Stre ets: See Section 7.2.1 D. c. Alleys: Alleys are required in the Boundary Street Redevelopment District to minimize curb cuts and to provide access to parking and service areas behind buildings. Alley requirements may be waived by the City architect for access to detached single-family residential lots greater than 45 feet in width in situations in which proper street front orientation, pedestrian circulation, and parking can still be accomplished. Alley locations and dimensions are not fixed but shall be designed to accommodate the alley's purpose. Alleys may be incorporated into parking lots as drive aisles and fire lanes. Recommended sections for alleys are included in Appendix C.    Created: 2023‐12‐08 08:25:06 [EST] (Supp. No. 1) Page 36 of 73 4. Master Plan: See Appendix B.3.2 for the Boundary Street Illustrative Master Plan.    Created: 2023‐12‐08 08:25:06 [EST] (Supp. No. 1) Page 37 of 73 2.7.4 AIR INSTALLATION COMPATIBILITY USE ZONE (AICUZ) OVERLAY DISTRICT STANDARDS A. Purpose: The Air Installation Compat ibility Use Zone (AICUZ) District shall overlay other zoning districts. The AICUZ District includes all lands within an established footprint affected by airport operations at the Marine Corps Air Station Beaufort (MCAS Beaufort). The footprint includes all lands underlying the noise zones of 65 DNL (day-night average sound level) and greater, and accident potential zones shown on the 2013 AICUZ Accident Potential Zones and/or Noise Zones Map associated with the F-35B, on file at the City of Beaufort Department of Planning and Development Services. Properties within Noise Zone 1 are exempt from the requirements of this section. In order to increase public awareness, and to ensure the general safety and welfare of persons affected by adverse impacts common to military aircraft operations, Section E. of this ordinance requires that property owners within the AICUZ District be properly notified of their location. In addition, Section 2.7.4 K. sets forth limitations and restrictions that shall apply to certain land uses that have been determined to be incompatible according to federal standards. B. Obstruction Height Zones: There are hereby created and established certain zones that include all of the land lying beneath the primary, clear zone, approach clearance, inner horizontal, conical, outer horizontal, and transitional surfaces as they apply to MCAS Beaufort. An area located in more than one of the described zones is considered to be only in the zone with the more restrictive height limitation. The various zones are hereby established and defined as follows:    Created: 2023‐12‐08 08:25:06 [EST] (Supp. No. 1) Page 38 of 73 ZONE DEFINITION MAXIMUM HEIGHT Primary Zone An area located on the ground or water, longitudinally centered on each runway with the same length as the runway — the width of the primary zone is 1,500 feet No object or structure will be permitted within a primary zone that is not part of the landing and take-off facilities and is of a greater elevation above mean sea level (AMSL) height than the nearest point of the runway centerline. Clear Zone The fan-shaped area adjacent to the landing threshold, beginning at each end of each primary zone and expanding to 2,284 feet wide, 3,000 feet from the threshold at an angle of 7 degrees, 58 minutes, 11 seconds, commencing 200 feet from the threshold No object or structure will be permitted within the first 200 feet of a clear zone that is not part of the landing and take-off facilities and is of a greater elevation AMSL height than the nearest point of the runway centerline. No object or structure will be permitted within the remaining 800 feet of a clear zone that is not part of the landing and take-off facilities and is of a greater elevation AMSL height than those heights prescribed as the maximum heights for the approach clearance zone and transitional zone. Formatted: Heading 2 Formatted: Heading 2    Created: 2023‐12‐08 08:25:06 [EST] (Supp. No. 1) Page 39 of 73 Approach Clearance Zone An area longitudinally centered about each runway centerline extended, beginning 200 feet beyond each end of the primary zone and extending outward for 50,000 feet — the width of the approach clearance zone is the same as the primary zone, uniformly flaring to 16,000 feet at 50,000 feet distance No object or structure will be permitted within the approach clearance zone beginning 200 feet from the runway end, that has a height greater than the runway end elevation at its centerline, the height above the runway end increasing with horizontal distance outward one foot vertically for every 50 feet horizontally until reaching a height 500 feet above the established airport elevation, then remaining at this AMSL elevation until a distance of 50,000 feet from the beginning point is reached. Inner Horizontal Zone An area around each military airfield constructed by scribing an arc of 7,500 feet about the end of each runway at its centerline and interconnecting the arcs by tangents No object or structure will be permitted in the inner horizontal zone that has a height greater than 150 feet above the established airport elevation. Conical Zone An area extending outward from the periphery of the inner horizontal zone outward and upward at a slope of 20:1 for 7,000 feet No object or structure will be permitted in the conical zone that has a height greater than 150 feet above the established airport elevation at its inner boundary with permitted height increasing one foot vertically for every 20 feet of horizontal distance measured outward from the inner boundary to a height 500 feet above the established airport elevation at the outer boundary. Formatted: Heading 2 Formatted: Heading 2 Formatted: Heading 2    Created: 2023‐12‐08 08:25:06 [EST] (Supp. No. 1) Page 40 of 73 Outer Horizontal Zone An area extending outward from the outer periphery of the airfield's conical zone for a distance of 30,000 feet No object or structure will be permitted in the outer horizontal zone that has a height greater than 500 feet above the established airport elevation. Transitional Zones Areas extending outward from the sides of the primary zone, the first 200 feet of the clear zone, and the approach clearance zone, connecting them to the inner horizontal zone, the conical zone, and the outer horizontal zone No object or structure will be permitted within the transitional zone that is greater in height than the primary zone, the clear zone, and the approach clearance zone at their adjoining boundary lines, increasing at a rate of one foot vertically for every seven feet horizontally, measured perpendicular to the runway centerline or centerline extended, until the transitional zone height matches the height of the inner horizontal zone, the conical zone, or the outer horizontal zone. (1) Outside of the zones established in Section 2.7.4 B., no object or structure will be permitted within the City whose height would: (a) Exceed 500 feet above ground level at its site. Formatted: Heading 2 Formatted: Heading 2 Formatted: Heading 2    Created: 2023‐12‐08 08:25:06 [EST] (Supp. No. 1) Page 41 of 73 (b) cause an existing MDA, MOCA, MVA, or a decision height to be raised. (Note: minimum descent altitude (MDA) is the lowest AMSL altitude to which descent is authorized on final approach or during circling-to land maneuvering in execution of a standard instrument approach procedure (SIAP) where electronic glide slope is not provided. Minimum obstruction clearance altitude (MOCA) is the lowest published altitude between radio fixes on federal VOR airways, off-airway routes, or route segments that meets obstruction clearance requirements for the entire route segment and assures acceptable navigational signal coverage only within 22 miles of a VOR. Minimum vectoring altitude (MVA) is the lowest AMSL altitude at which aircraft operating on Instrument Flight Rules (IFR) will be vectored by a radar controller, except when otherwise authorized for radar approaches, departures, or missed approaches). (c) impose either the establishment of restrictive minimum climb gradients or nonstandard take-off weather minimums for any runway at MCAS Beaufort. C. Accident Potential Zones (APZ): APZs are divided into three types along primary flight paths: • The "clear zone" (CZ) is an area at either end of a runway that possesses a high potential for accidents. • APZ-1 is the area normally beyond the CZ, which possesses a significant potential for accidents. • APZ-2 is an area normally beyond APZ-1, which has a measurable potential for accidents. APZs are shown on the 2013 AICUZ Accident Potential Zones and/or Noise Zones Map associated with the F-35B, on file at the City of Beaufort Department of Planning and Development Services. D. Noise Zones:    Created: 2023‐12‐08 08:25:06 [EST] (Supp. No. 1) Page 42 of 73 1. Definition: The noise exposure from aircraft operations is measured using the day-night average sound level noise metric (DNL). The DNL averages aircraft sound levels over a 24-hour period with an adjustment for increased sensitivity to nighttime noise. The DNL visually is depicted as a noise contour that connects points of equal value. The area between two noise contours is known as a "noise zone". Noise zones are hereby established as follows: AIRPORT NOISE ZONE DNL VALUES 1 Less than 65 DNL 2a 65 to 70 DNL 2b 70 to 75 DNL 3 Greater than 75 DNL Noise zones are shown on the 2013 AICUZ Accident Potential Zones and/or Noise Zones Map associated with the F-35B, on file at the City of Beaufort Department of Planning and Development Services. Noise Zone 1 covers that portion of the City that lies outside of the Air Installation Compatible Use Zone. As indicated in Section 2.7.4 A., properties within Noise Zone 1 are exempt from the requirements of this section. Formatted: Heading 2, Left Formatted: Heading 2, Left Formatted: Heading 2, Left Formatted: Heading 2, Left Formatted: Heading 2, Left Formatted: Heading 2    Created: 2023‐12‐08 08:25:06 [EST] (Supp. No. 1) Page 43 of 73 2. Residential Construction Restrictions: Aside from the residential construction restrictions imposed by this overlay, more stringent requirements of the base zoning district may also apply. For the purposes of this section, "gross density" means the total number of dwelling units (which include any building or portion thereof used as a place of residence, such as single-family dwellings, multi-family dwellings, commercial apartments, live/work units, garage apartments, accessory dwelling units, etc.) on a site divided by the entire site area. a. Residential development is not permitted in a Clear Zone. b. Single-family residential developm ent within Accident Potential Zone (APZ 1 and APZ 2) and/or within Noise Zone 3 (DNL 75 and above) may not exceed a gross density of one (1) dwelling unit per three (3) acres. c. Residential development within Noise Zone 2b (DNL 70 to 75) may not exceed a gross density of one (1) dwelling unit per acre. d. Residential development within Nois e Zone 2a (DNL 65 to 70) may not exceed a gross density of two (2) dwelling units per acre. 2.7.4 E. Notification: 1. At all real estate clos ings involving a property in an APZ or noise zone as depicted on the 2013 AICUZ Accident Potential Zones and/or Noise Zones Map associated with the F-35B, on file at the City of Beaufort Department of Planning and Development Services, the buyer, seller, and witnesses shall sign the following AICUZ disclosure form which shall be filed with the deed and/or plat at the Beaufort County Register of Deeds Office. Property owners may contact the City of Beaufort Department of Planning and Development Services to obtain information concerning a property's designation on the AICUZ Maps. Air Installation Compatible Use Zone Disclosure Form    Created: 2023‐12‐08 08:25:06 [EST] (Supp. No. 1) Page 44 of 73 The property at _______ (address/location) is located in proximity to the Marine Corps Air Station Beaufort. The City of Beaufort has determined that persons on the premises will be exposed to accident potentials and/or significant noise levels as a result of the airport operations. The City has established certain noise zones and accident potential zones (APZs). Pursuant to the 2013 AICUZ Accident Potential Zones and/or Noise Zones Map associated with the F-35B, the above property is located in: Noise Zone (2a, 2b, or 3) _______ and Accident Potential Zone (CZ, APZ-1, or APZ-2) _______. The City has placed certain restrictions on the development and use of property within these areas. Before purchasing the above property, you should consult the Administrator to determine the restrictions that have been placed on the subject property. CERTIFICATION As the owner of the subject property, I hereby certify that I have informed _______, as a prospective purchaser, that the subject property is located in an Air Installation Compatibility Use Zone District. Dated this _______ day of _______, _______. Witness_______Owner_______ As a prospective purchaser of the subject property, I hereby certify that I have been informed that the subject property is in an Air Installation Compatible Use Zone District, and I have consulted the Administrator to determine the restrictions which have been placed on the subject property. Dated this _______ day of _______, _______. Witness_______Purchaser_______    Created: 2023‐12‐08 08:25:06 [EST] (Supp. No. 1) Page 45 of 73 2. All prospective renters signing a co mmercial or residential lease shall be notified by the property owner through a written provision contained in the lease agreement if the leased property is located within the AICUZ District. 3. All subdivision plats, planned unit development plats, rowhome plats and /or condominium documents in the AICUZ District shall contain the following Acknowledgement: Air Installation Compatible Use Zone Disclosure Statement This property lies in an Air Installation Compatible Use Zone District, which applies to property in proximity to the Marine Corps Air Station Beaufort. The City of Beaufort has determined that persons on the premises will be exposed to accident potentials and/or significant noise levels as a result of the military operations. Future purchasers and lessors of this property or portions thereof will be required to sign a disclosure form per the City of Beaufort Planning Department and file the form with the deed and/or plat at the Beaufort County Register of Deeds Office (RMC Office). All or a portion of this property lies within: Pursuant to the 2013 AICUZ Accident Potential Zones and/or Noise Zones Map associated with the F-35B, all or a portion of this property lies within: Noise Zone (2a, 2b, or 3): _______, which has an associated DNL (Day-Night Average Sound Level) of: _______ Accident Potential Zone (CZ, APZ-1, or APZ-2): _______ In the case of new construction, a signed AICUZ Acknowledgement shall accompany the building permit application.    Created: 2023‐12‐08 08:25:06 [EST] (Supp. No. 1) Page 46 of 73 AICUZ OVERLAY TABLE OF PERMITTED AND PROHIBITED USES1, 2 AIRPORT HAZARD ZONE AIRPORT NOISE CLEAR APZ-1 APZ-2 ZONE 3 Recreation, Education, Public Assembly Community-Oriented Cultural Facilities N N N N Institutional Care Facilities N N N N Detention Facilities N N N N Hospitals and Health Clinics N N N N Assembly and Worship/Religious Institutions N N N N School, Public or Private N N N N Commercial Day Care Centers N N N N Commercial Lodging/Overnight Guest Accommodations N N N N Restaurant, Cafe, Coffee Shop N N N N Commercial Amusement (Indoor & Outdoor)/Indoor Recreation and Entertainment/Outdoor Entertainment N N N N Health/Fitness Facility N N N Y Commercial Retail Center N N N N Parks with Active Recreation N N N N Mobile/Manufactured Home Parks N N N N Formatted: Heading 2, Left Formatted: Heading 2, Left Formatted: Heading 2 Formatted: Heading 2 Formatted: Heading 2 Formatted: Heading 2 Formatted: Heading 2 Formatted: Heading 2 Formatted: Heading 2 Formatted: Heading 2 Formatted: Heading 2 Formatted: Heading 2 Formatted: Heading 2 Formatted: Heading 2 Formatted: Heading 2 Formatted: Heading 2 Formatted: Heading 2    Created: 2023‐12‐08 08:25:06 [EST] (Supp. No. 1) Page 47 of 73 Storage of Explosive, Flammable or Toxic Materials in Above-Ground Tanks N N N N Petroleum Refining and Related Industries N N N Y Chemical Manufacturing, Manufacturing of Plastic and/or Rubber N N N N Group Home/Community Residence/Temporary Shelter N N N Y Residential 2-3 Unit Buildings or Multi-Family (syn. Apartment House) N N N N Single Family Attached N N N N Single-Family/Unit: 1 unit or less per 3 acres 3 N Y Y Y Single-Family/Unit: 1 unit or less per 1 acre 3 N N N N Single-Family/Unit: 2 unit or less per 1 acre 3 N N N N N = Not permitted use Y = Permitted if underlying district allows use (see Section 3.2 Permitted Land Uses) 1 A definition of each listed use type is in Article 13 (Definitions). 2 Similar uses, and any other retail business or service establishm ent permitted or conditionally permitted as determined by the Administrator, shall be of the same general character as the listed uses. 3 See Section 2.7.4 D.2. for complete information on Residential Construction Restrictions based on specific Noise Zones. F. Notice to Military Installations: Formatted: Heading 2 Formatted: Heading 2 Formatted: Heading 2 Formatted: Heading 2 Formatted: Heading 2 Formatted: Heading 2 Formatted: Heading 2 Formatted: Heading 2 Formatted: Heading 2 Formatted: Heading 2 Formatted: Heading 2 Formatted: Heading 2    Created: 2023‐12‐08 08:25:06 [EST] (Supp. No. 1) Page 48 of 73 1. S.C. Code 1976 § 6-29-1610, as amende d, sets forth notice requirements pertaining to federal military installations. The provisions of this subsection shall apply to the following types of land use and zoning decisions when such decisions involve land located within an Accident Potential Zone or Noise Zone, pursuant to the 2013 AICUZ Accident Potential Zones and/or Noise Zones Map associated with the F-35B: a. Adoption of or amendment to the City of Beaufort Comprehensive Plan; b. An appeal to the City of Beaufort Zoning Board of Appeals (ZBOA); c. A request to the ZBOA for a variance from the provisions of City of Beaufort Unified Development Ordinance; or d. A request to the ZBOA for approval of a Special Exception Use. (Ord. No. O-19-17 , (Att.), 7-25-2017)    Created: 2023‐12‐08 08:25:06 [EST] (Supp. No. 1) Page 49 of 73 2.7.5 BEAUFORT COUNTY AIRPORT OVERLAY DISTRICT STANDARDS A. Description: The Airport has one runway designated as Runway 7/25. The runway accommodates aircraft over 12,500 pounds and is therefore classified as "other than utility runway." Since aircraft can land in either direction, non- precision-instrument approaches with visibility minimums greater than three- fourths of a statute mile have been approved and published by the FAA for both ends of Runway 7/25 at the Airport. These classifications are current as of October 2006. The following prescribes the airport height zones and limitations for Beaufort County Airport as dictated by Title 14 Code of Federal Regulations Part 77. A property located in more than one of the described zones is considered to be in only one zone with the more restrictive height limitation. B. Airport Overlay Zones: 1. Primary Zone: This is an area lo ngitudinally centered on a runway, extending 200 feet beyond each end of that runway with the width so specified for each runway for the most precise approach existing or planned for either end of the runway. The width of the primary zone is as follows: 500 feet for non-precision instrument runways having visibility minimum greater than three- fourths of a statute mile. 2. Horizontal Zone: This is the area around a civil airport with an outer boundary perimeter of which is constructed by swinging arcs of specified radii from the center of each end of the primary zone of each airport's runway and connecting the adjacent arcs by line tangent to the arcs. The radius of the arc specified for each end of a runway will have the same arithmetical value. That value will be the highest composite value determined for either end of the runway. The radius of each arc is: a. Runway 7 End: Ten thousand feet for non-precision instrument runways having visibility minimum greater than three-fourths of a statute mile.    Created: 2023‐12‐08 08:25:06 [EST] (Supp. No. 1) Page 50 of 73 b. Runway 25 End: Ten thousand feet for non-precision-instrument runways having visibility minimum greater than three-fourths of a statute mile. 3. Conical Zone: This is the area extending outward from the periphery of the horizontal zone for a distance of 4,000 feet. 4. Approach Zone: This is an area longitudinally centered on the extended runway centerline and extending outward from each end of the primary surface. An approach zone is designed for each runway end based upon the type of approach available or planned for that runway end. a. The inner edge of the approach zone is the same width as the primary zone (i.e., 500 feet) and it expands uniformly to a width of: i. Runway 7 End: Three thousand five hundred feet for non-precision instrument runways having visibility minimum greater than three-fourths of a statute mile. ii. Runway 25 End: Three thousand five hundred feet for non-precision instrument runways having visibility minimum greater than three-fourths of a statute mile. b. The outer width of an approach zone to an end of a runway will be that width prescribed in this Subsection for the most precise approach existing or planned for that runway end. c. The approach surface extends for a horizontal distance of: i. Runway 7 End: Ten thousand feet for all non-precision-instrument runways other than utility. ii. Runway 25 End: Ten thousand feet for all non-precision-instrument runways other than utility.    Created: 2023‐12‐08 08:25:06 [EST] (Supp. No. 1) Page 51 of 73 5. Transitional Zone: This is the area extending outward from the sides of the primary zones and approach zones connecting them to the horizontal zone. Height limits within the transitional zone are the same as the primary zone or approach zone at the boundary line where it adjoins and increases at a rate of one foot vertically for every seven feet horizontally, with the horizontal distance measured at right angles to the runway centerline and extended centerline, until the height matches the height of the horizontal zone or conical zone or for a horizontal distance of 2,000 feet from the side of the part of a precision approach zone that extends beyond the conical zone. C. Use Limitations: The following special requirements shall apply to uses within the Airport Overlay that are allowed in the base zone: 1. Lights or illumination used in conjunction with streets, parking, signs or use of land and structures shall be arranged and operated in such a manner that is not misleading or dangerous to aircraft operating from the airport or in the vicinity thereof as determined by the airport operator. 2. No operations of any type shall produce smoke, glare or other visual hazards within three miles of a usable runway. 3. No operations of any type shall produce electronic interference with navigation signals or radio communication between the airport and the aircraft. 4. No use of land shall be permitted which encourages large concentrations of birds, waterfowl or other wildlife within the vicinity of the airport. D. Official Map: The airport height zones defined in Section A. are shown on the map entitled "Beaufort County Airport Overlay District" which is incorporated herein by reference.    Created: 2023‐12‐08 08:25:06 [EST] (Supp. No. 1) Page 52 of 73 E. Notification: At all real estate closings involving a property in the approach zone or transitional zone, the buyer, seller and witnesses shall sign the following form, which shall be filed with the deed and/or plat at the Beaufort County Register of Deeds Office. Airport Overlay Disclosure Form (For Properties within the Approach Zone or Transitional Zone of the Beaufort County Airport Overlay District) The property at _______ (address/location) is located within the _______ Zone of the Airport Overlay District for the Beaufort County Airport (73J). Beaufort County has determined that persons on the premises may be exposed to noise and accident potentials from aircraft over flight as a result of airport operations. The County has placed certain height restrictions on this property for both man- made and natural obstructions based on its location within this airport height zone. Before purchasing the above property, you should consult with the Beaufort County Zoning and Development Administrator to determine the restrictions that have been placed on the subject property. CERTIFICATION As the owner of the subject property, I hereby certify that I have informed _______, as a prospective purchaser, that the subject property is located in the _______ Zone of the Beaufort County Airport Overlay District. Dated this _______ day of _______/_______/_______, _______. Witness_______ Owner_______    Created: 2023‐12‐08 08:25:06 [EST] (Supp. No. 1) Page 53 of 73 As a prospective purchaser of the subject property, I hereby certify that I have been informed that the subject property is in the _______ Zone of the Beaufort County Airport Overlay District, and I have consulted with the Beaufort County Zoning and Development Administrator to determine the restrictions which have been placed on the subject property. Dated this _______ day of _______/ _______/ _______, _______. Witness_______ Purchaser_______ Division 3.4: Overlay Zones Beaufort County Airport Overlay (BC-AO) District 3-76 Beaufort County Community Development Code 2. All subdivision plats, planned unit development plats, townhouse plats and/or condominium documents shall contain the following disclosure statement: Airport Overlay Disclosure Statement (For Properties within the Beaufort County Airport Overlay District) This property lies within an Airport Overlay District for the Beaufort County Airport. There are structure height restrictions imposed on this property based on its location within an airport height zone. Purchasers should contact the Beaufort County Community Development Department for information regarding these restrictions. All or a portion of this property lies within: Airport Height Zone: _______ F. Non-Conforming Uses and Structures: See Article 11 for all non- conformities.    Created: 2023‐12‐08 08:25:06 [EST] (Supp. No. 1) Page 54 of 73 G. Variances: The Zoning Board of Ap peals (ZBOA - See Section 10.3) shall not act upon a request for a variance from this section affecting lands within the AO Zone until they have received an advisory opinion from the Beaufort County Aviation Advisory Board. If an advisory opinion is not received within 30 days of notification, the ZBOA may proceed to act on the request without the opinion. 2.8: ALTERNATIVE DEVELOPMENT PATTERNS    Created: 2023‐12‐08 08:25:06 [EST] (Supp. No. 1) Page 55 of 73 2.8.1 SMALL-SCALE PLANNED INFILL DEVELOPMENT A. Purpose: The alternative development options of this section allow for variety in development standards while maintaining the overall character of a neighborhood. These options have several public benefits: • They allow for development that is more sensitive to the environment, especially in areas with water features, natural drainage-ways, and significant trees; • They allow for the preservation of open and natural areas; • They promote better site layout and opportunities for private recreational areas; • They promote opportunities for af fordable housing by allowing for a mixture of lot and building sizes; and • They promote energy-efficient development. B. Definition: A small-scale planned infill development is a residential subdivision in which the lots are allowed to be smaller (in area and width), have reduced setbacks, and/or are oriented in a different manner than otherwise required for the underlying base zoning district, but in which the overall density cannot exceed the maximum density limit for the underlying zoning district. C. Applicability: Subdivisions that compri se a minimum size of 1/2 acre (in T3 or T4 districts only) or an entire block face may utilize these standards. D. Conflict with Other Regulations: If there is a conflict between the small- scale planned infill standards of this section and any other requirement of this Code, the standards of this section take precedence. Otherwise, a small-scale planned infill is subject to all other applicable requirements of this Code.    Created: 2023‐12‐08 08:25:06 [EST] (Supp. No. 1) Page 56 of 73 E. Approval Procedures: Small-scale planned infill developments are subject to the subdivision review procedures set forth in Section 9.9 with the following exceptions: 1. In the Historic District, these develo pments are also subject to review by the Historic Review Board (Section 9.10). 2. In T3-S these developments are permitted by Special Exception and are subject to review by the Zoning Board of Appeals (Section 10.3). F. Lot Size: There is no set minimum lot size (area or width) requirement within a small-scale planned infill development. Individual lot sizes shall be adequate to meet all required density and development standards. Minimum lot sizes may be established by the Planning Commission during the subdivision process. G. Setbacks and Building Separation : The minimum setback and frontage standards of the base zoning district apply along the perimeter of a small-scale planned infill development. All detached structures within a small-scale planned infill development shall be separated by a minimum distance of 10 feet. This distance may be reduced subject to the building code. H. Open Space Requirement: A portion of the gross area of the development shall be reserved for some type of usable, common open space. See Section 7.4.2 and 3 for required amounts and appropriate types of open space. See Section 7.4.5 for ownership and maintenance requirements.    Created: 2023‐12‐08 08:25:06 [EST] (Supp. No. 1) Page 57 of 73 2.8.2 COTTAGE COURTS (A.K.A. BUNGALOW COURTS, POCKET NEIGHBORHOODS, COURTYARD HOMES) A. Purpose: The alternative development options of this section allow for development of smaller dwelling units, organized around a common outdoor space, that are appropriate to the character of the surrounding neighborhood. They provide a space-efficient and economical alternative to traditional single dwelling unit development. The ownership model may be either fee-simple or condominium-style, and can achieve the same benefits as those listed in Section 2.8.1 A. B. Definition: A Cottage Court development is a residential development in which small buildings are oriented around a central green or open space that is accessible by all residents. C. Density: Additional density is permitted, as follows, in exchange for the buildings having a limited footprint, size, and height: 1. In T3-S the overall density is permitted to be up to 1.25 times the maximum density limit. 2. In T3-N the overall density is permitted to be up to 2 times the maximum density limit. D. Applicability: Cottage Courts are pe rmitted in T3 and T4 districts only. They are not permitted in the Historic District. E. Lot Size: Prior to development, lots or combinations of lots shall meet the following dimensional standards: 1. 160 feet wide by 100 feet deep wher e formalized parking on-street exists on adjacent streets and no on-site parking is required. 2. 180 feet wide by 100 feet deep if on-site parking is required.    Created: 2023‐12‐08 08:25:06 [EST] (Supp. No. 1) Page 58 of 73 3. Exception: In T3-S, Cottage Courts ar e limited to lots greater than 1 acre. F. Conflict with Other Regulations: If there is a conflict between the cottage courts standards of this section and any other requirement of this Code, the standards of this section control. Otherwise, cottage courts are subject to all other applicable requirements of this Code. G. Approval Procedure: Cottage courts are subject to the subdivision review procedures set forth in Section 9.9. H. Number of Buildings: Cottage co urts shall contain a minimum of 4 residential buildings. For courts that have 8 or more buildings, a community structure shall be provided. Examples of these include garden sheds, pavilions, community houses, etc.    Created: 2023‐12‐08 08:25:06 [EST] (Supp. No. 1) Page 59 of 73 I. Building Size and Details: 1. Buildings may have a maximum 800 square foot footprint (not including porches), and may be no more than 1.5 stories tall. 2. Front porches shall be provided facing the common space, and they shall be a minimum of 8 feet deep. 3. Where a building is located on both a public street and a public space, it shall address the street with either a porch or stoop, and shall provide entries onto both spaces. 4. The public spaces of the home shall be located facing the common space. These include living, dining, and kitchen areas. First-floor bedrooms should not be located fronting the civic space. An exception to this shall be made on corner lots, where public spaces may face the street. J. Setbacks and Building Separation: The minimum setback and frontage standards of the base zoning district apply along the perimeter of a cottage court development. Buildings may be attached or detached. All detached structures within a cottage court development shall be separated by a minimum distance of 10 feet. This distance may be reduced, subject to the building code. K. Parking Requirements and Configurat ion: One space per unit is required. Adjacent on-street parking spaces may count towards this requirement. Parking shall be screened from the public right-of-way by buildings. A common parking area, accessed via an alley, is recommended. If this is not possible, access easement(s) shall be provided as part of the final plat. Parking shall be screened from neighboring properties per the requirements of Section 5.7.8 A.    Created: 2023‐12‐08 08:25:06 [EST] (Supp. No. 1) Page 60 of 73 L. Open Space Requirement: A minimum of 400 square feet of common open space is required per unit. The open space shall be connected to the public right-of-way either by opening up to the street, or via a paved path no less than 8 feet wide. Ownership and maintenance requirements shall be in accordance with Section 7.4.5.    Created: 2023‐12‐08 08:25:06 [EST] (Supp. No. 1) Page 61 of 73 2.8.3 TRADITIONAL NEIGHBORHOOD DEVELOPMENT FLOATING OVERLAY DISTRICT A. Purpose and Intent: The Traditional Neighborhood Development (TND) overlay District is established to: • Support the development of fully integrated, mixed-use, pedestrian- oriented neighborhoods with a variety of housing choices. • Prevent the development of large, single-use, homogenous subdivisions. • Minimize traffic congestion, suburb an sprawl, infrastructure costs and environmental degradation. • Create a streamlined way to transition the City's zoning to the Transect- zones. B. Process and Applicability: The applic ation of the TND overlay district shall depend upon the size of the site in accordance with the provisions below. The TND overlay district shall not be applied to any site with a T1 (Natural Preserve District) base district designation. 1. General Process: a. Master Plan: Applican ts shall first develop and present a master plan, complying with the Sketch Plan requirements in 9.3.1.B, for the entire parcel which shall include land allocations by Transect zone, proposed subdivisions of property, required open space, street regulating plan, neighborhood structure(s) and other information required to indicate compliance with this section. Upon approval by the MPC - and subsequent rezoning approval as applicable - the master plan is vested. b. Preliminary Plat: Upon approval of the Master Plan, the applicant shall proceed towards approval of a Preliminary Plat (Section 9.9.3).    Created: 2023‐12‐08 08:25:06 [EST] (Supp. No. 1) Page 62 of 73 2. Applicability: TND APPLICABILITY SUMMARY TABLE SITE AREA PROCESS TYPE 15 acres to 40 acres Optional with Conditional TND designation (See a., below) 40 acres to 100 acres Optional with By-Right TND designation (See b., below) 100 acres or larger Mandatory with By-Right TND designation (See c., below) a. 15—40 acres: Sites having at least 15 acres but less than 40 acres may be developed under a TND overlay district. Development sites with a base zoning of T3 shall be subject to the rezoning process consistent with Section 9.16. Development sites with a base zoning of T4 or T5 shall follow the procedures for Major Subdivisions found in Sections 9.9.3 and 9.9.4. b. 40—100 acres: The TND overlay Dist rict designation shall automatically apply by-right to all development sites of at least 40 acres but less than 100 acres. Applicants shall have the option of developing such sites using the standards of the TND overlay district or the standards of the underlying base zoning district. The approval of TND master plans on such properties shall follow the procedures for major subdivisions found in Sections 9.9.3 and 9.9.4. Formatted: Heading 2, Left Formatted: Heading 2, Left Formatted: Heading 2 Formatted: Heading 2 Formatted: Heading 2 Formatted: Heading 2    Created: 2023‐12‐08 08:25:06 [EST] (Supp. No. 1) Page 63 of 73 c. 100+ acres: The TND overlay District designation shall automatically apply by-right to all development sites of at least 100 acres. Development sites of this size are required to follow the standards of the TND overlay district. The approval of TND master plans on such properties shall follow the procedures for major subdivisions found in Sections 9.9.3 and 9.9.4. d. Exceptions: Land designated as LI and IC districts are not subject to these provisions and may be developed as more conventional, single-purpose developments. C. Land Allocation by Transect Zones: When composing the TND master plan, the Transect-based districts in Section 2.3.2 shall be used as sub-districts within the ranges noted in the following chart. The allocation of land by Transect zone shall be made a part of all applications and approvals for TND master plans. All development shall conform to the standards of the designated form-based sub-district in which it is located, unless otherwise noted in this section.    Created: 2023‐12‐08 08:25:06 [EST] (Supp. No. 1) Page 64 of 73 15—40 ACRES GREATER THAN 40 ACRES BASE ZONE TRANSECT ZONE MINIMUM AREA* MAXIMUM AREA* MINIMUM AREA* MAXIMUM AREA* T3 T3 districts 30% 85% 30% 75% T4 districts 10% 50% 10% 50% T5 districts None 10% None 30% T4 T3 districts None 50% None 60% T4 districts 10% 50% 20% 90% T5 districts None 30% None 40% T5 T3 districts None 30% None 40% T4 districts 10% 50% 10% 50% T5 districts 20% 80% 30% 80% * Listed as % of gross land area. Note: T4-NA sub-district may be incorporated as no more than 1/3 of the permitted T4 allocation. D. Land Uses: 1. The TND master plan shall include a regulating plan designating each Transect zone (T-zone) by parcel. 2. Land uses shall be limited to those permitted in the designated T-zone. Formatted: Heading 2, Left Formatted: Heading 2, Left Formatted: Heading 2, Left Formatted: Heading 2, Left Formatted: Heading 2, Left Formatted: Heading 2, Left Formatted: Heading 2, Left Formatted: Heading 2, Left Formatted: Heading 2, Left Formatted: Heading 2, Left Formatted: Heading 2, Left Formatted: Heading 2    Created: 2023‐12‐08 08:25:06 [EST] (Supp. No. 1) Page 65 of 73 3. Similar T-zones shall generally front across streets. Dissimilar categories shall abut at rear lot lines or transition mid-block. E. Civic/Open Space: 1. Development shall be required to reserve usable, common open space in accordance with the standards for the underlying base district(s), as specified in Sections 7.4.2 and 3. 2. No portion of the TND shall be further than ¼ mile from a Community Green Space, as defined in Section 7.4.3. Existing common open spaces outside of the TND boundaries may be used to satisfy this requirement.    Created: 2023‐12‐08 08:25:06 [EST] (Supp. No. 1) Page 66 of 73 3. On parcels 40 acres and larger, a minimum of 2% of the gross land area shall be reserved for the construction of community structures, (schools, community buildings, religious institutions, etc.) and their support facilities (parking areas, etc.). These sites shall be counted towards the open space requirement. Such sites shall be easily accessible within the neighborhood — and to the greater community where appropriate — and shall help to visually anchor important vistas. See Section 4.5.13 for building design standards for civic buildings. If after 5 years, the community facilities are not constructed, the land may be converted to common open space. F. Neighborhood Structure: 1. TNDs shall be organized by individual pedestrian sheds (or walking areas) with a ¼-mile radius (1,320 linear feet). 2. Neighborhood centers/main streets shall be located at or near the center of all pedestrian sheds, and shall include: a. The area of the TND with the grea test intensity of development, b. One or more civic buildings and/or uses, and    Created: 2023‐12‐08 08:25:06 [EST] (Supp. No. 1) Page 67 of 73 c. One or more Community Green Spaces. 3. Each pedestrian shed is encouraged to include a variety of uses, building types, and housing types, so that the majority of lots within the TND are within walking distance (no more than ½ mile) of a neighborhood center, and at least 2 types of housing are provided (e.g., single-family detached, rowhomes, duplexes, apartments) per pedestrian shed. 4. Street networks shall be interconnected using a grid or modified grid. Exceptions and special designs can be considered due to geography and special site conditions. 5. Block Size: Blocks shall be compact so that they are comfortably walkable and appropriate for their context. a. In T3-S zones, block sizes are flexible, but the perimeter shall not exceed 2,640 linear feet (½ mile). An average block perimeter less than 2,000 feet is preferred. b. In T3-N zones, block sizes are flex ible, but the perimeter shall not exceed 1,700 linear feet (½ mile). An average block perimeter less than 1,500 feet is preferred. c. In T4, and T5 zones, blocks shall be no more than 400 feet on any side. An average block length of 250-300 feet is preferred. The block perimeter shall not exceed 1,320 linear feet (¼-mile). d. Exceptions may be made for natural elements such as wetlands, trees, topography, to be incorporated into the site design. 6. Within 200 feet of all parcels outside the TND, lot widths, depths, and building types shall provide a graduated transition to adjacent development, particularly any such areas that are of a lower intensity/density.    Created: 2023‐12‐08 08:25:06 [EST] (Supp. No. 1) Page 68 of 73 G. Relief: Modifications to these standards may be reviewed and permitted by the MPC if the plan is found to still be in compliance with the intent of this Code.    Created: 2023‐12‐08 08:25:06 [EST] (Supp. No. 1) Page 69 of 73 2.8.4 PLANNED UNIT DEVELOPMENT DISTRICT (PUD) A. Purpose and Intent: The PUD is intended to encourage innovative land planning and site design concepts that cannot be achieved by other mechanisms provided by this Code. PUDs should achieve a high level of environmental sensitivity, aesthetics, high quality development and other community goals by: 1. Allowing greater freedom in selecting the means to provide access, open space and design amenities. 2. Promoting quality urban design and environmentally sensitive development by allowing development to take advantage of special and unique site characteristics, locations, building types and land uses. B. Process and Applicability: 1. General Process: PUDs are considered a two step process. First, there is a Rezoning which follow the general procedures of Section 9.16. Second, a Final Plat approval, per Section 9.9.4 shall occur. A complete master plan and written report shall be developed and submitted for approval as part of the rezoning process in order to determine the desired standards and design of the project. Those documents shall be submitted in accordance with the following standards: a. Master Plan: Applican ts shall first develop and present a master plan, complying with the Sketch Plan requirements in 9.3.1.B, for the entire parcel which includes, but is not limited to: i. Size: Size, in acres, shall be liste d on the master plan. For redevelopment sites, as defined in Section 8.3.2 A., PUDs shall have a minimum of 4 acres. For all other developments PUDs shall have a minimum of 10 acres. If the project is intended to be developed in phases, the master plan shall include all phases.    Created: 2023‐12‐08 08:25:06 [EST] (Supp. No. 1) Page 70 of 73 ii. Districts: Land allocations by zoning district, including specific modifications to the Code requirements of those districts clearly highlighted. iii. Street Layout and Regulating Plan: the design and location of the streets shall be provided. Streets shall conform with the street sections in Appendix C of this Code. Additional bicycle and pedestrian circulation shall also be indicated. iv. Lot Layout: Proposed subdivisions of property, required open space, street regulating plan, neighborhood structure(s). The PUD shall have provisions to allow for a systematic methodology to provide a variety of lot sizes. v. Open Space: Open space requirements are 1.5 times the standards set in Section 7.4.2 with the exception that a minimum of 10% open space is required for all PUDs, regardless of size or zoning district. These should be clearly indicated on the master plan. vi. Community Space: the requirements of 2.8.3.C.3 shall be met. vii. Stormwater Requirements: Stormw ater shall be considered on a PUD- wide basis and the general locations shall be indicated. Floodplain information shall also be included on the master plan. viii. Resources: The general location of all historic, cultural, and environmentally sensitive resources shall be depicted on the master plan. b. Written Report: A written report shall be submitted to explain the type, nature, intent and characteristics of the proposed development, and shall specifically include: i. Site Description: A general description of the proposal, including a detailed description of the site, location, context, and any cultural, environmental and/or historic resources.    Created: 2023‐12‐08 08:25:06 [EST] (Supp. No. 1) Page 71 of 73 ii. Vision Statement: The goals, tene ts, any special initiatives which the development intends to achieve shall be clearly identified for review and discussion. iii. Incompatibilities: A detailed descri ption of the provisions of the Code which prevent the development, as desired shall be provided. This shall include analysis showing how the general Land Development standards in Article 7, and the TND Floating Overlay District standards in Section 2.8.3 limit the intended development. iv. Modification to Code: A detailed desc ription of exceptions or variations from the requirements of this Code, per the incompatibilities listed above. All items not explicitly listed as modifications will be subject to the requirements of this Code. v. Land Allocation: Tables showing the total number of acres in the proposed development and the percentage designated for each proposed type of land use, including open spaces, recreation areas, public facilities, wetlands and wetland impacts. This should be coordinated with the Districts as shown in the master plan. If the development is intended to be phased, the phasing plan shall be indicated on the tables. vi. Program: A complete developmen t program, including number of residential units and proposed densities, building types, minimum and maximum lot sizes, and square feet and identification of other nonresidential uses. vii. Building Design Standards: Guidel ines to achieve aesthetics and high quality development shall be included. These may be further elucidated in the covenants after all City approvals have been secured.    Created: 2023‐12‐08 08:25:06 [EST] (Supp. No. 1) Page 72 of 73 viii. Compatibility Statement: A statem ent of how the proposed development is consistent adopted plans and documents, including, but not limited to, the Civic Master Plan, the most recent Comprehensive Plan, applicable stormwater regulations, other model ordinances and/or applicable development standards. ix. Other: Additional relevant information as requested by the Administrator. c. Performance Guarantee: Before appr oval of a PUD, the City Council may require a contract with safeguards satisfactory to the City guaranteeing completion of the development plan in a period to be specified by the City, but which period shall not exceed 5 years unless extended by the City for due cause show. Such guarantee may include the submission of a performance bond in an amount set by the City. d. Final Plat: Upon approval of the Rezoning (inclusive of the master plan), the applicant shall proceed towards approval of a Final Plat (Section 9.9.4). C. Expiration of Approval: The City shall have the right to review a concept plan approved as part of a PUD when no building permits have been issued in the past 5 years, and may choose not to issue further permits within the PUD until a revised concept plan has been approved.    Created: 2023‐12‐08 08:25:06 [EST] (Supp. No. 1) Page 73 of 73 2.8.5 LEGACY PLANNED UNIT DEVELOPMENT DISTRICT (LPUD) A. Purpose: The legacy planned unit development (LPUD) zoning district is intended to be utilized only for the continuation of previously established PUDs. B. Minor Plan Amendments Permitted by the Administrator: The amendment of previously approved PUDs shall be approved by the Administrator, if the amendment results in a development intensity that is no greater than the previously approved intensity in terms of total square feet, total number of units, height, and build-upon area. Additionally, a minor plan amendment shall be limited to technical considerations that could not be reasonably anticipated during the approval process, or any other change that has no material effect on the character of the approved PUD development or any of its approved terms or conditions. C. Major Plan Amendments Permitted by City Council Approval Only: All major changes not subject to B, above, shall be reviewed by the Planning Commission (PC) and approved by City Council in accordance with the procedures outlined in Section 2.8.4 B.1. D. Rezoning a PUD: Any existing LPUD may choose to rezone to a standard City zoning district by going through the rezoning process in accordance with the procedures outlined in Section 9.16. (Ord. No. O-14-23 , 9-26-2023) Beaufort, South Carolina, The Beaufort Development Code 3: LAND USE PROVISIONS Beaufort, South Carolina, The Beaufort Development Code    Created: 2023‐12‐08 08:25:08 [EST] (Supp. No. 1) Page 1 of 59 3: LAND USE PROVISIONS 3.1: APPLICABILITY 3.1.1 USE PERMISSIONS DEFINED The use table in Section 3.2 assigns 1 of 6 permissions to each use in each district as follows: A. Permitted Use (P): The use is permitted by-right, with no additional conditions or requirements. B. Conditional Use (C): The use is permitted by-right, provided that the additional use conditions set forth in this article are met. 1. The specified standards are intended to ensure that these uses are compatible with other development permitted within the districts. 2. Approval procedures for conditional uses are in Section 9.4.2 (Zoning Permit.) C. Special Exception (SE): The use is permitted only when a Special Exception has been approved. 1. Special Exceptions are required for uses that may be compatible with other uses permitted in a district, but which, because of their unique characteristics or potential impacts on the surrounding neighborhood and/or the city as a whole, require individual consideration in their location, design, configuration, and/or operation at the particular location proposed. 2. All applications for Special Exceptions shall, at a minimum, meet the standards for the district in which they are located and the additional standards set forth in this article for that use. There may also be specific building design standards that must be met (Section 4.5). 3. Approval procedures for Special Exceptions are found in 9.13. D. In Existing Facilities Only (E): The use is permitted only in existing buildings or facilities and in any expansions that do not increase the size of the facility structure by more than 50%. E. Retail Frontage Overlay Required (RF): Where a block face is designated on the zoning map as a Retail Frontage overlay, the building(s) with direct access to the designated fronting street is permitted to be occupied by certain commercial uses as indicated in the use table. F. T4-Neighborhood Artisan (A): This use is permitted with conditions only in the T4-Neighborhood Artisan (T4-NA) District. Conditions may be listed in the "Additional Standards" section as appropriate. Other uses permitted in the general T4-N district may have special conditions for T4-NA; those conditions are also listed in the additional standards section as appropriate. G. Prohibited Uses (—): The use is prohibited in the specified district. - 3: LAND USE PROVISIONS 3.2: TABLE OF PERMITTED USES Beaufort, South Carolina, The Beaufort Development Code    Created: 2023‐12‐08 08:25:06 [EST] (Supp. No. 1) Page 2 of 59 3.2: TABLE OF PERMITTED USES Land uses in transect-based and conventional districts shall be permitted in accordance with the table below. Special provisions related to uses in the AICUZ Overlay District are in Section 2.7.4. The zoning designation of water is the same as the land it is adjacent to. P=Permitted Use C=Conditional Use SE=Special Exception E=in Existing Building/Facility Only RF = Retail Frontage Only A=T4-Neighborhood Artisan subdistrict Only — = Prohibited use DISTRICT T1 T3- S T3- N T4- HN T4- N T4- NA T5- DC T5- UC RMX LI IC MHP ADD'L STAN- DARDS WHEN APPLI- CABLE RESIDENTIAL 3.3 Household Living Single-Family Dwelling — P P P P P E E E E E — — 2- or 3-Unit Dwelling — C— C P P SE P P — — P — 4.5.5 Rowhome or Townhouse — — SE— — C SE P P P C — P — 2.5.9; 4.5.6 Apartment House (a.k.a. Multifamily Dwelling - 4+ units) — — — — C — P P CP — P — 2.5.9; 4.5.7 Home Occupation - Minor — C C C C P P P P — — — 3.3.2.D Home Occupation - Major — SE SE SE C P P P — — — — Live-Aboard Boat C C C C C C C C C C C C 3.3.2.D Live/Work Unit — — — — C P P P P C P — 4.5.8 Manufactured Home — — — — — — — — — — — C 3.3.2.G Group Living Group Dwelling (≤ 8 residents) — — — — P — P P P — — — — Group Dwelling (> 8 residents) — — — — SE — SE P P — P — — PUBLIC AND CIVIC 3.4 Civic/Government Facilities C — SE SE P P P P P P P — 3.4.2.A Educational Facilities College/University/Trade/Vocational — — — — C — P P P C P — 3.4.2.B.1 School, Public or Private — C C C P C P P P — P — 3.4.2.B.2 Parks and Open Space Cemetery C E E E E E E E C E E E 3.4.2.C Formatted Table - 3: LAND USE PROVISIONS 3.2: TABLE OF PERMITTED USES Beaufort, South Carolina, The Beaufort Development Code    Created: 2023‐12‐08 08:25:06 [EST] (Supp. No. 1) Page 3 of 59 Park/Open Space P P P P P P P P P P P P 7.4 INSTITUTIONAL 3.5 Community Service — SE SE SE P P P P P SE P — — Day Care Facility Family Day Care Home (≤ 6 clients) See Home Occupation — Minor Group Day Care Home (7-12 clients) & Commercial Day Care Center (>12 clients) — — SE C C C P P P P P — 3.5.2.A Treatment Facility — — — — SE — SE SE P — SE — — Health Care Facilities — — — — — — — P P — P — — Religious Institution — C C P P P P P P — P — 3.5.2.B COMMERCIAL 3.6 Entertainment Indoor Entertainment — C C — C P P P P P P — 3.6.2.A Outdoor Entertainment — — — — C C P P P — P — 3.6.2.A Sexually-Oriented Business — — — — — — — — — C — — 13.2.1 Office — — — — P C P P P P P — 3.6.2 A— Overnight Guest Accommodation Bed and Breakfast — — SE SE P SE SE P P — — — — 3.6.2.C.1 Short-Term Rental — C C C C C C C — — C — 3.6.2.C.2 Inn/Motel/Hotel — — — — C SE P P P — — — 3.6.2.C.3 Recreational Vehicle Park — — — — — — — — SE — — — — Retail & Restaurants — — — — C C C C P — C — 3.6.2.D Animal Hospitals and Kennels — — — — — — — — P P — — 3.6.2 E VEHICLE- AND BOAT-RELATED USES 3.7 Vehicle and Boat Sales and Rental — — — — A — — C -- P — — — 3.7.2.A Drive-Thru Facility — — — — — — — C C SE — — 3.7.2.B Fuel Sales/Car Wash — — — — — — — C C P — — 3.7.2.C Vehicle Service and Repair — — — — C — — SEC C P — — 3.7.2.D Parking, Commercial, Surface — — — — C — C P P P P — 3.7.2.F Parking, Structure — — — — RF — P P P P P — — Passenger Terminals — — — — — — — SE P P — — 3.7.2.G Water/Marine-Oriented Facilities P — — — P — P P — — P — — INDUSTRIAL 3.8 Aviation Services — — — — — — — — — P — — — Light Industrial Services — — — — A C — C C P — — 3.8.2.A Manufacturing and Production Services — — — — A E — — C P — — 3.8.2.B Truck Terminal — — — — — — — — — P — — — - 3: LAND USE PROVISIONS 3.2: TABLE OF PERMITTED USES Beaufort, South Carolina, The Beaufort Development Code    Created: 2023‐12‐08 08:25:06 [EST] (Supp. No. 1) Page 4 of 59 Self Storage — — — — — E — — C P — — 3.8.2 A COMMUNICATION & INFRASTRUCTURE USES 3.9 Major Infrastructure/Utilities — — — — A — — — SE P — — 3.9.2.A Minor Infrastructure/Utilities E C C C C C C C C P C — 3.9.2.B Waste Related Services — — — — — — — — — SE — — 3.9.2.C Wireless Communications Facility — — — — — — — — C C — — 3.9.2.D FORESTRY, AGRICULTURE, HORTICULTURE C C C C C C C C C C C — 3.10 3.2.1 OVERVIEW OF USE CATEGORIES A. Definition of Use Category: See Section 13.1 (Definitions of Specialized Terms). B. Basis for Classification: Use categories classify land uses and activities into categories based on common functional, product, or physical characteristics. Characteristics include the type and amount of activity, the type of customers or residents, how goods or services are sold or delivered and site conditions. The use categories provide a systematic basis for assigning present and future land uses into appropriate Districts. C. Principal Uses: Principal uses are assigned to the category that most closely describes the nature of the principal use. The "Characteristics" subsection of each use category describes the common characteristics of each principal use. 1. Developments with Multiple Principal Uses: When all principal uses of a development fall within one use category, the entire development is assigned to that use category. When the principal uses of a development fall within different use categories, each principal use is classified in the applicable category and each use is subject to all applicable regulations for that category. D. Accessory Uses: Accessory uses are allowed by-right in conjunction with a principal use, unless otherwise stated in this Code. Also, unless otherwise stated, accessory uses are subject to the same regulations as the principal use. Common accessory uses are listed as examples in the use category descriptions. See Section 3.12 for additional standards for accessory uses and structures. E. Use of Examples: The "Examples" subsection of each use category lists common examples of uses included in the respective use category. The names of these sample uses are generic. They are based on common meanings and not on what a specific use may call itself. For example, a use that calls itself a "wholesale warehouse," but sells mostly to consumers, is included in the "Retail Sales and Service" category rather than the "Wholesale Sales" category. This is because the actual activity on the site matches the description of the "Retail Sales and Service" category. F. Similar Use Interpretation Criteria: The following considerations shall be used in making similar use interpretations: 1. The actual or projected characteristics of the activity in relationship to the stated characteristics of each use category. 2. The relative amount of site area or floor space and equipment devoted to the activity. 3. Relative amounts of sales from each activity. 4. The customer type for each activity.    Created: 2023‐12‐08 08:25:06 [EST] (Supp. No. 1) Page 5 of 59 5. The relative number of em ployees in each activity. 6. Hours of operation. 7. Building and site arrangement. 8. Vehicles used with the activity. 9. The relative number of vehicl e trips generated by the use. 10. How the use advertises itself. G. RMX/T5-UC SPLIT ZONES: 1. In properties split zoned RMX/T5-UC, one district and corresponding lot and design standards shall be utilized at beginning of the development process. This process shall be followed with commercial and mixed uses developments, with outlots. If urban blocks and lots/street sections, as found in Appendix C, exist adjacent to the RMX/T-5UC district being developed, T-5 UC development standards shall be followed. 3.3: RESIDENTIAL USES 3.3.1 OVERVIEW OF RESIDENTIAL USE CATEGORIES A. Household Living: 1. Characteristics: Household Living is characterized by the residential occupancy of a dwelling unit by a household. Tenancy is arranged on a month-to-month or longer basis. 2. Accessory Uses: Accessory uses include recreational activities, hobbies, accessory dwelling units, enclosed storage, and parking of the occupants' vehicles. Home Occupations are accessory uses that are subject to additional regulations set forth in Section 3.3.2 D. 3. Examples: Examples include single-family dwellings, two-family dwellings, triplexes, condominiums, townhouses, and other multi-family dwellings, upper floor residential, retirement center apartments, some congregate care facilities, and manufactured housing and other structures with self-contained dwelling units. 4. Exceptions: Living in a dwelling unit where units are rented for less than 30 days is classified in the Overnight Guest Accommodations category. B. Group Living: 1. Characteristics: Group Living is characterized by the residential occupancy of a structure by a group of people who do not meet the definition of "household living." The size of the group may be larger than the average size of a household. Tenancy is arranged on a monthly or longer basis. Uses where tenancy may be arranged for a shorter period are not considered residential. They are considered to be a form of transient lodging (see "Overnight Accommodations" — Section 3.6.1 C. — and "Community Service" — Section 3.5.1 A. — categories). Generally, group living structures have a common eating area for residents. The residents may receive care, training, or treatment. 2. Accessory Uses: Accessory uses include recreational facilities, dining facilities, and parking of vehicles for occupants and staff. Formatted: Font: Bold Formatted: Indent: First line: 0.5" Formatted: Indent: Left: 0.5"    Created: 2023‐12‐08 08:25:07 [EST] (Supp. No. 1) Page 6 of 59 3. Examples: Examples include group dwellings, dormitories, fraternities and sororities, nursing homes, assisted living facilities, and monasteries and convents. 4. Exceptions: a. Lodging where tenancy may be arranged for periods of less than 30 days is classified in the Overnight Guest Accommodations category. b. Lodging where the residents meet the definition of a household, and where tenancy is arranged on a month to month basis, or for a longer period, is classified as Household Living. c. Congregate Care Facilities, where individual units meet the definition of a dwelling unit in Article 13, are classified as Household Living. d. Monasteries and convents affiliated with, and attached to — or on the same campus as — a church are considered Religious Institutions. 3.3.2 ADDITIONAL STANDARDS FOR RESIDENTIAL USES The following additional standards apply to the approval and development of projects where the use is listed in the "Table of Permitted Uses" in Section 3.2 as Conditional (C), Special Exception (SE), or T4-Neighborhood Artisan (A). In addition, any Building Design standards, as set forth in Article 4, apply as applicable. A. 2—3 Units Dwelling: See Section 4.5.5. B. Rowhome (syn. townhome, townhouse, rowhouse): See Section 4.5.6. C. Multi-family Dwelling: See Section 4.5.7. D. Home Occupations: Home Occupations shall be separated into 2 categories and permitted subject to an annual business license, issued by the City of Beaufort and the following provisions. 1. Home Occupation - Minor: A Minor Home Occupation shall be deemed an accessory use, and must meet the following standards: a. Incidental: Such use shall be clearly incidental and secondary to the principal use of the dwelling. b. Access: Entrance to the home office portion of the dwelling shall be from within the dwelling, and not through a new outside entrance, except where this provision conflicts with the requirements of the South Carolina Department of Health and Environmental Control (DHEC). c. Clients: i. Instruction in music, dancing and similar services shall be limited to 2 clients at a time. ii. Family Child Care Home is limited to 6 or fewer clients. d. Employees: Employees are limited to those persons who reside on the premises. 2. Home Occupation - Major: a. Employees: A maximum of 2 employees who are not residents of the household may work on-site. b. Process: These are permitted by Special Exception (Section 9.13). 3. Home Occupation Standards:    Created: 2023‐12‐08 08:25:07 [EST] (Supp. No. 1) Page 7 of 59 a. General to All Home Occupations: i. Disturbance: Such use shall create no disturbing or offensive noise, vibration, smoke, dust, odor, heat, glare, unhealthy or unsightly conditions, visual or audible interference in any radio or television receivers off the premises, traffic, or parking problems. ii. Hours: Activities involving visitors/clients shall occur only between 8 a.m. and 8 p.m. When Family Day Care Home is a Home Occupation-Minor, it is exempt from this standard. iii. Parking: Off-street parking shall be provided in accordance with the standards of Section 5.7 for the type of home occupation maintained. The off-street parking spaces required for the home business shall be maintained in addition to the space or spaces required for the residence itself. No parking spaces, other than driveways, may be located in the required front yard setback. Such use shall not result in off-street parking of more than 3 vehicles at any one time not that are owned by members of the occupant household. iv. Vehicles: Only passenger vehicles with a size not exceeding classification as light duty vehicles (8,500 pounds or less), shall be permitted in connection with the home occupation. v. Trailers: One vehicle trailer, no more than 12 feet in length, is permitted as part of such use. The trailer shall not be parked in the street right-of-way or in the front yard, unless it is parked in a driveway. vi. Specialized Use Standards: a. Barber Shop/Beauty Parlor: This use shall be licensed and operated according to the standards set by the South Carolina Department of Labor, Licensing, and Regulation, and shall be limited to 2 chairs. The applicant shall certify that the proposed use is not prohibited by any covenant or deed restriction on the property. b. Event Venue: A private home may be used as an event venue and considered a home occupation-major if not more than 1 event occurs per month, on average, with each event lasting no longer than 2 days. Events shall be limited to 501(c)3 non-profit functions. b. Specific to all Home Occupations: i. Outdoor Activities: Outdoor operations and storage related to the home occupation are prohibited. ii. Signs: No more than one sign or name plate not exceeding 1.5 square feet in area is permitted. No freestanding, illuminated, or animated sign shall be posted. If a home occupation is located in a bed and breakfast establishment, then only one sign shall be permitted for both uses. iii. Display/Sales: Products that have been produced on premises may be displayed on front porches and cover up to 25% of the floor/wall area of the porch. Items that are offensive and violate provisions of Section 1.2 of this Code, are not permitted. Display of merchandise in the yard is not permitted. iv. Sales: Only articles made on the premises, with the exception of antiques, may be sold. Non-durable articles (consumable products) that are incidental to the    Created: 2023‐12‐08 08:25:07 [EST] (Supp. No. 1) Page 8 of 59 service, that is the principal use in the home occupation may be sold on the premises. v. Maximum Size: The home occupation shall occupy a maximum of 25% of the floor area of the principal dwelling. There is no maximum percentage of floor area for accessory structures. 4. Exclusions to Home Occupations: No home occupation shall be permitted that results in any of the following: a. Makes internal or external alterations inconsistent with the residential use of the building. b. Is visible from the street. c. Generates traffic, parking, sewage, or water use in excess of what is normal in the residential neighborhood. d. Creates a hazard to persons or property. e. Results in electr ical interference. f. Results in the outside storage or display of anything. 5. Prohibited Home Occupations: The following are prohibited as Home Occupations (Minor or Major): a. Automobile and/or body and fender repair. b. Restaurants. c. Uses that entail boarding, harboring, training, raising, or treating dogs, cats, birds, or other animals on-site. d. Body piercing and tattoo facilities. e. Storage. E. Live-Aboard Boat: Such boats shall be located within a marina permitted by the South Carolina Department of Health and Environmental Control Office of Ocean and Coastal Resource Management (SCDHEC-OCRM) or attached to a mooring ball located within a mooring field permitted by SCDHEC- OCRM. F. Live-Work Unit: See Section 4.5.8. G. Manufactured Home: Manufactured homes are permitted as part of a manufactured home park only. Manufactured home parks standards are listed in Section 4.6.5. 3.4: PUBLIC AND CIVIC USE CATEGORIES 3.4.1 OVERVIEW OF PUBLIC AND CIVIC USE CATEGORIES A. Civic Facility: 1. Characteristics: This category includes public or quasi-public facilities open to the general public that serve a cultural, educational, and/or social function in the community. 2. Accessory Uses: Accessory uses include retail uses such as a gift/book shop, restaurant, etc.    Created: 2023‐12‐08 08:25:07 [EST] (Supp. No. 1) Page 9 of 59 3. Examples: Examples include aquariums, arboretums, art galleries and exhibitions, civic theaters, facilities for live theater and concerts, historic sites and exhibits, libraries, museums, planetariums, and zoos. B. Government Facilities: 1. Characteristics: Government facilities include offices, storage, maintenance and other facilities for the operation of local, state, or federal government. 2. Accessory Uses: Accessory uses include storage, maintenance and fueling facilities, satellite offices, and parking areas. 3. Examples: Examples include government offices, government/public buildings, government/public land, jails, City Hall, maintenance facilities, fire, police, and emergency medical and ambulance stations, detention centers, lifeguard services, and post offices. 4. Exceptions: a. State, county or city parks are classified as Parks and Open Space. b. Water and wastewater faciliti es, gas, electric and other infrastructure services — whether public or private — are classified as Utilities. c. Waste and recycling services are cl assified as Waste-Related Services. C. Educational Facilities: 1. Characteristics: This category includes public and private schools at the primary, elementary, middle, junior high, or high school level that provide state-mandated basic education. This category also includes colleges and other institutions of higher learning that offer courses of general or specialized study that lead to a degree. Colleges tend to be in campus-like settings or on multiple blocks. 2. Accessory Uses: Accessory uses at schools include play areas, cafeterias, temporary classroom buildings, recreational and sport facilities, auditoriums, and before-or-after school day care. Accessory uses at colleges include offices, housing for students, food service, laboratories, health and sports facilities, theaters, meeting areas, parking, and maintenance facilities. 3. Examples: Examples include public and private daytime schools, boarding schools, military academies, universities, colleges, community colleges, business school, trade and vocational schools, nursing and medical schools that are not accessory to a hospital, and seminaries. 4. Exceptions: a. Preschools not affiliated with and attached to primary schools are classified as Day Care uses. b. Learning centers and other similar facilities that do not provide a state-mandated curriculum are classified as Retail Sales and Service. D. Parks and Open Areas: 1. Characteristics: Parks and open areas focus on natural areas consisting mostly of vegetative landscaping or outdoor recreation, community gardens, and public squares. These areas tend to have few structures. 2. Accessory Uses: Accessory uses include club houses, maintenance facilities, administrative offices for city park personnel, police substations, concessions, single-family and two-family caretaker's quarters, and parking.    Created: 2023‐12‐08 08:25:07 [EST] (Supp. No. 1) Page 10 of 59 3. Examples: Examples include parks, shoreline protection areas, beach accesses, publicly-owned golf courses, public swimming pools, public tennis courts, publicly-owned ballfields and basketball courts, cemeteries, open space, public squares, plazas, recreational trails, historically significant sites and structures, botanical gardens, nature preserves, and wildlife refuges. 4. Exceptions: Privately owned facilities, such as golf courses, tennis courts, pools, etc. are classified as Entertainment uses. 3.4.2 ADDITIONAL STANDARDS FOR PUBLIC AND CIVIC USES The following additional standards apply to the approval and development of projects where the use is listed in the "Table of Permitted Uses" in Section 3.2 as Conditional (C), Special Exception (SE), or T4-Neighborhood Artisan (A). In addition, any Building Design standards, as set forth in Article 4, apply as applicable. A. Civic Facilities: The size of structures shall be limited to a 2,500 square foot footprint. B. Educational Facilities: 1. School, College/University/Trade/Vocational: a. Site Design: Campuses must be designed to address the public realm with either buildings or public spaces. Service areas and parking must be screened from the street. b. Specific to LI: Trade/Vocational schools and branches of College/University facilities are permitted if they relate to an Industrial function that is permitted in this district. 2. Schools (Public or Private): a. Neighborhood Connectivity: Vehicular and pedestrian connectivity to surrounding residential areas is required. Where a full vehicular connection is impractical, a multi-use trail connection shall be provided. b. On-Site Circulation: Pedestrians and bicyclists must have a designated safe path between the adjacent roads, school drives, parking areas, and the school building. c. Temporary Classrooms: The siting of all temporary classrooms shall be approved by the Administrator. d. Lot Size Minimum: 20,000 square feet. e. Location, Specific to T3 and T4-HN: No structure on the property may be closer than 25 feet to any internal side or rear property line if adjacent to T3 or T4-HN zoning district. C. Parks and Open Space: 1. Cemetery: a. Size: Minimum of 1 acre. b. Accessory Uses: One dwelling unit for a caretaker is permitted on-site as an accessory use. No crematorium shall be permitted. 3.5: INSTITUTIONAL USE CATEGORIES Formatted: List Paragraph, Indent: Left: 0.75"    Created: 2023‐12‐08 08:25:07 [EST] (Supp. No. 1) Page 11 of 59 3.5.1 OVERVIEW OF INSTITUTIONAL USE CATEGORIES A. Community Service: 1. Characteristics: Community Services are uses of a public, nonprofit, or charitable nature that provide a local service to people of the community. Typically, they provide the service on-site or have employees at the site on a regular basis. The service is ongoing, not just for special events. Community centers or facilities that have membership provisions must be open to the general public to join at any time (for instance, any senior citizen could join a senior center). The use may provide special counseling, education, or training of a public, nonprofit, or charitable nature. Overnight stays are not permitted in these facilities. 2. Accessory Uses: Accessory uses include offices, meeting areas, food preparation areas, parking, health and therapy areas and athletic facilities. 3. Examples: Examples include senior centers, community centers, public information facilities, visitors' center, civic/business association, the Salvation Army, youth club facilities, and hospices and social service facilities. 4. Exceptions: a. Private lodges, clubs, and private or commercial athletic or health clubs are classified as Retail Sales and Service. b. Parks are classified as Parks and Open Areas. c. Uses where tenancy is arranged on a month-to-month basis or for a longer period are residential and are classified as Household or Group Living. B. Day Care: 1. Characteristics: Day care uses provide care, protection, and supervision for children or adults on a regular basis, away from their primary residence, for less than 24 hours per day. 2. Accessory Uses: Accessory uses include offices, recreation areas and parking. 3. Examples: Examples include preschools, nursery schools, child care centers, latch key programs, and adult day care programs. 4. Additional Standards: A Family Day Care Home, where in-home care for six or fewer individuals is provided, is considered a minor home occupation (accessory use) and is subject to the standards of Section 3.3.2 D. 5. Exceptions: Day care does not include preschools operated within public or private schools, or facilities operated in connection with an employment use, shopping centers, or other principal use, where children are cared for while parents or guardians are occupied on the premises or in the immediate vicinity. C. Health Care Facilities: 1. Characteristics: Health care facilities include uses that provide medical or surgical care to patients, and offer overnight care. 2. Accessory Uses: Accessory uses include outpatient clinics, offices, meeting areas, cafeterias, laundries, parking, maintenance facilities, educational facilities and housing facilities for staff or trainees. 3. Examples: Examples include medical centers, hospitals, health center, and medical laboratories and clinics.    Created: 2023‐12‐08 08:25:07 [EST] (Supp. No. 1) Page 12 of 59 4. Exceptions: a. Uses that provide exclusive care and planned treatment or training for psychiatric, alcohol, or drug problems, where patients are residents of the program, are classified as Treatment Centers. b. Medical clinics that provide care where patients are generally not kept overnight are classified as Offices. D. Treatment Centers: 1. Characteristics: Residential care facilities provide a variety of services, including housing and care related to treatment programs. 2. Accessory Uses: Accessory uses include club houses, maintenance facilities, administrative offices, police substations, concessions, single-family and two-family caretaker's quarters, and parking. 3. Examples: Examples include some group homes for the physically disabled, mentally disabled or emotionally disturbed, homeless shelters, some residential programs for drug and alcohol treatment, and alternative or post-incarceration facilities. 4. Exceptions: Congregate care facilities where individual units meet the definition of a dwelling unit are classified as Household Living. E. Religious Institutions: 1. Characteristics: Religious institutions primarily provide meeting areas for religious activities. 2. Accessory Uses: Accessory uses include Sunday school facilities, playgrounds, child care while parents or guardians are on the premises, parking, cemeteries, caretaker's housing, and group living facilities such as convents, fairs and bazaars up to 3 days, health and therapy areas, and other use directly related to the mission of religious institutions, whether or not such uses require a business license, on the condition that such uses are located in a building owned by a religious institution. 3. Examples: Examples include churches, temples, synagogues and mosques. 4. Exceptions: a. Preschools and infant day care are classified as Day Care uses. b. Schools are classified as Schools. 3.5.2 ADDITIONAL STANDARDS FOR INSTITUTIONAL USES The following additional standards apply to the approval and development of projects where the use is listed in the "Table of Permitted Uses" in Section 3.2 as Conditional (C), Special Exception (SE), or T4-Neighborhood Artisan (A). In addition, any Building Design standards, as set forth in Article 4, apply as applicable. A. Day Care Facility: 1. Specific to T4-HN: All day care facilities, except for Family Day Care Home, shall be owned and operated by Religious Institutions or Community Service Facilities. 2. Specific to T4-N: a. Number: Limited to one per block (300 feet r

Text truncated. Open the original for the full document.

Source: City of Beaufort website. First collected Oct 24, 2026.