DRB Non-Historic Application Guidance (PDF)
Town of Sullivan's Island · Charleston County · Other
Open the original document More from Town of Sullivan's Island
Text
Extracted automatically from the original. Tables and formatting may not survive; the original document is authoritative.
T
OWN
OF
S
ULLIVAN
’
S
I
SLAND
DRB Applicant Presentation
NON-HISTORICPROJECTS
Residential Design Guidelines
The following design standards can be used to illustrate how your design achieves
greater Neighborhood Compatibility:
• Massing ratio (21-35): 5:3 aspect ratio (width to length or vice versa) for
new construction and additions.
• Eave height (21-36): Should not exceed 13’ feet above the FEMA base flood
elevation or ground.
• Porch & decking (21-37): 40% of the front should have a porch 8’ deep; no
front yard decks; limit decks to 20’ on any side; avoid decks on the front
facades.
• Roof shape (21-38): A primary roof should cover at least 50% of the
principal building’s footprint;
• Roof decks & roof gazebos (21-39): Incompatible; Should be designed as an
integral part of the roof.
• Front stairs (21-41): Should have stairs that provide direct access to front
yard.
• Landscaping (21-41): Should allow visual access through the site with (low
grasses, low shrubs, and high canopy trees); use native species and
traditional ornamental species; prohibit front yard berms.
• Driveways (21-42): Double frontage or corner lots should provide access via
rear or side unless they are heavily traveled streets; paved parking areas in
the front yard are prohibited.
Principal Building Square Footage (§ 21-27) When requesting relief for additional
Principal Building Square Footage, the DRB will be looking carefully at ways the
applicant is offsetting the impact of the requested relief. The applicant might choose
one or more of the following techniques, for example:
Show how your design offsets the modification: • Lower the first-floor height closer to
grade to offset the additional
massing.
• Lower the main roof eave height to
offset the additional massing.
• Lower the overall roof height to
reduce the additional massing
• Reduce the amount of second floor
wall surface
• Place the second floor square
footage within the roofline
• Provide additional setbacks for
second story walls to reduce the
impact to neighbors
• Assure to the DRB that the design is
unique, well articulated and
appropriately scaled
• DRB suggests that prior to submittal
please review your plans with
neighbors and request their
approval of square footage changes.
PrincipalBuildingCoverage(§ 21-25): WhenrequestingreliefforPrincipalBuilding
Coverage,theDRBwillbe lookingat waystheapplicantis offsettingtheimpactof the
requestedrelief. Theapplicantmightchooseoneor moreof thefollowingtechniques,
forexample:
Show how your design offsets the modification: • Lower the first-floor height closer
to grade to offset any additional
massing.
• Coverage relief typically includes
additional lower one-story design
elements. Please indicate clearly
these one-story elements in the
design.
• Reduce the amount of second
story wall surface area and second
story heated sq. ft.
• Coverage Relief is typically
granted for smaller than average
lots due to zoning formulas.
• Assure to the DRB that the design
is unique, well articulated and
appropriately scaled.
FrontandSideBuildingSetbacks(§ 21-22): Buildingsetbacksareintendedtocreate
openspace(landscaping,sunlight,distance)betweenbuildingsand the right-of-way.
WhenrequestingreliefforFrontandSideSetbacks,theDRBwillbelookingatwaysthe
applicantis offsettingtheimpactof the requestedrelief. Theapplicantmightchoose
oneormoreofthefollowingtechniques,forexample:
Show how your design offsets the modification:
• Request Side Setback relief as a
means of preserving trees, tree
canopies or other significant
landscape elements.
• Consider designing one story
construction in the requested
relief zone to preserve sunlight
and views.
• Provide well articulated side
facades with separated massing
elements.
• DRB suggests that prior to
submittal please review your
plans with neighbors and
request their approval of
setback changes.
SecondStorySideFaçadeSetback(§ 21-22): Secondstorysidefaçadesetbackoftwo
feetreducestheoverallheightandmassof thewallandensuresmoresunlightforthe
adjacentproperty. Twofootsecondfloorsetbacksarerequiredforanywallinexcessof
10’. DRB can doublethat widthto 20’. The DRB does not have the authorityto
completelyeliminatethesecondstorysetback.
• Lower the main roof eave height
to offset the additional massing.
• Lower the overall roof height to
reduce the additional massing
• Reduce the amount of second
floor wall surface
• Place the second floor square
footage within the roofline
• Assure to the DRB that the
design is unique, well
articulated and appropriately
scaled
• DRB suggests that prior to
submittal please review your
plans with neighbors and
request their approval of square
footage changes.
Show how your design offsets the modification:
Side Façade Articulation (§ 21-29): The depth and width of a building has a
substantial impact on its mass and scale. Removing the requirement for articulations in
the side wall can result in a long unbroken side façade, which lacks visual appeal and
creates more mass.
Show how your design offsets the
modification:
• It is unlikely that the DRB will
grant 100% relief allowing a 60’
long unarticulated wall.
• When requesting any relief less
than 100%, assure to the DRB
that the design is unique, well
articulated and appropriately
scaled
Accessory Structures (§ 21-138): Show the all elevations and site location of the
accessory structure and the context of the principal building.
Show how your design offsets the
modification:
• Show structures on adjacent
properties.
• Show roof pitch is greater than
7/12.
• Indicate the size and overall
height of the accessory structure.
Source: Town of Sullivan's Island website. First collected Oct 31, 2026.