Board of Architectural Design and Historic Review — Agenda Packet
City of Spartanburg · Spartanburg County · Boards and Commissions · meeting of Jan 11, 2024 · Agenda packets
Open the original document More from City of Spartanburg
Text
Extracted automatically from the original. Tables and formatting may not survive; the original document is authoritative.
The City of Spartanburg
Board of Architectural Design
& Historic Review
City of Spartanburg | Board of Architectural Design & Historic Review 1
AGENDA
January 11, 2024, at 5:30 P.M.
Spartanburg County Council Chambers
366 N. Church Street – Spartanburg, SC 29303
(
Please Note: Items as they appear on the Docket may or may not be considered in the order
as they are presented. The Chairman will announce any changes after the roll call)
I. Call To Order.
II. Ro
ll Call.
III. F
reedom of Information Act Compliance – Public notification of the City of Spartanburg’s Board of
Architectural Design & Historic Review meeting has been published, posted and mailed in
co
mpliance with the Freedom of Information Act and the requirements of the City of Spartanburg’s
Zoning Ordinance.
IV
. Approval of Agenda.
V. D
isposition of Minutes from the December 14, 2023, Meeting.
V
I. Old Business: None.
COA: 23-040-00058: Certificate of Appropriateness for Major Works – 266 Hydrick Street (TMS: 7-
12-14-172.00) in the Hampton Heights Neighborhood Historic District. The applicant is seeking
a
pproval of the construction of a single-family structure on a vacant lot. The property is located in the
R-8 SFD (General Residential – Single Family District). Owner/Applicant: Royce Camp, Royce
C
amp Construction, LLC.
V
II. New Business:
1. COA: 23-040-00081: Certificate of Appropriateness for Major Works – 728 Reynolds Street
(TMS: 7-08-15-119.00) in the Beaumont Mill Village Historic District. The applicant is seeking
a
pproval to replace windows in newly purchased home with vinyl windows. The property is
located in the R-6 (General Residential District). Owner/Applicant: Gergley Properties, LLC /
C
ontractor: Lowes.
2. C
OA: 23-040-00084: Certificate of Appropriateness for Major Works – 150 W. Hampton Avenue
(TMS: 7-16-02-054.00) in the Hampton Heights Neighborhood Historic District. The applicant is
seeking approval of the installation of a small shed on the site. The property is located in the R-8
S
FD (General Residential – Single Family District). Owner/Applicant: David A Williams.
3. C
OA: 23-040-00086: Certificate of Appropriateness for Major Works – 527 Beaumont Avenue
(TMS: 7-08-15-118.00) in the Beaumont Mill Village Historic District. The applicant is seeking
a
pproval to replace 8 windows with new windows that meet the HARB specifications. The
property is located in the R-6 (General Residential District). Owner/Applicant: Virginia Painter /
C
ontractor: Taylor France, Neely’s.
V
III. Approved Certificate of Appropriateness for Minor Works since the December 14, 2023,
Mee
ting.
Page 1 of 85
The City of Spartanburg
Board of Architectural Design
& Historic Review
City of Spartanburg | Board of Architectural Design & Historic Review 2
I
X. Staff Updates:
X. Ad
journment.
F
or more information, please contact Martin L. Livingston, Jr., AICP, CPM, Community Development
Director at (864) 580-5323 or by email at planning@cityofspartanburg.org.
Page 2 of 85
HARB – Meeting Minutes – 2023-12-14 Page 1 of 6
Meeting Minutes of the Board of Architectural Design and Historic Review
Tuesday, December 14th, 2023, at 5:30 PM
City Hall Council Chambers
The City of Spartanburg Board of Architectural Design and Historic Review (HARB ) met in City
Hall Council Chambers on Tuesday, December 14
th, 2023, at 5:30PM with the following members in
attendance: Bill Michels, Kenneth Brown, Rod McCants, Tina Wilson, Michael Pittillo and
Sylvelie Franke. Representing for the Planning Department is, Bob Coler, Attorney for City of
Spartanburg, Nan Zhou, Planner II, Tia Keitt, Planner II, and Oksana Holbrooks,
Administrative Assistant.
Roll Call:
Mr. Michels: Bill Michels
Mr. McCants: Rod McCants
Mr. Brown: Kenneth Brown
Ms. Franke: Sylvelie Franke
Ms. Wilson: Tina Wilson
Mr. Pittillo: Mr. Michael Pittillo
Mr. Michels: The Freedom of Information Act Compliance called for public notification to the City
of Spartanburg’s Board of Architectural Design and Historic Review meeting has been published,
posted, and mailed in compliance with the Freedom of Information Act and the requirements of the
City of Spartanburg Zoning Ordinance.
Approval of Agenda:
A motion was made by Mr. Pittillo, seconded by Mr. McCants approve the agenda. The motion
was approved with a vote of 6-0.
Mr. Michels: Can I get a motion to approve the agenda as is? And second? All in favor?
Attendees: Aye.
Approval of Meeting Minutes from November 9
th, 2023.
A motion was made by Mr. Pittillo, seconded by Mr. Brown approve the agenda. The motion
was approved with a vote of 6-0.
Old Business:
None.
Certificate of Appropriateness for Major Works – Applicant is seeking approval of a
Certificate of Appropriateness to replace existing wood siding with MiraTEC Treated
Composite Trim siding. The property is located at 544 S. Irwin Ave. in Hampton Heights
Historic District and is currently zoned as the R-8/SFD (TMS# 7-16-02-237.00).
Landowner/Applicant: Amy Wilhoit; Contractor: Freddie’s Painting.
Project Description and History
The project site is located on an approximately 10,934 square foot lot in the Hampton Heights
Historic District. The site is located on the west side of South Irwin Avenue. The site currently
contains one single-family home that was constructed in 1926. This residential structure is a wood-
framed bungalow with a brick foundation. The structure has an open porch on the right side of the
house. This residential structure has a gable roof with comp shingle.
Page 3 of 85
HARB – Meeting Minutes – 2023-12-14 Page 2 of 6
The applicant is seeking approval from the Board of Architectural Design and Historical Review to
replace damaged wood siding with MiraTEC Treated Composite Trim siding.
Analysis
Zoning Ordinance and Historic Design Manual Consistency
The project site is located in the Hampton Heights District which has design guidelines for
development. These guidelines are outlined in the Design Manual for the City of Spartanburg Historic
Districts and Landmarks. The purpose of the Manual is to provide property owners guidance for the
preservation and protection of historic and architecturally valuable districts and sites in the City. The
project is also subject to Section 510 of the City’s Zoning Ordinance, Historic Preservation. This
section allows the Board to review applications involving historic structures and districts and issue a
Certificate of Appropriateness subject to the Standards listed in the Ordinance.
The project site has a zoning designation of R-8/SFD, Single Family Zoning District, which allows
for single family dwelling units. Section 510.6 of the City of Spartanburg Zoning Ordinance list
standards for reviewing Certificate of Appropriateness. Specifically, Section 510.6 (C)(2) states that
in reviewing applications for new construction or alteration, the board shall consider the U.S.
Secretary of the Interior’s Standards for Rehabilitation and the five criteria listed in the findings.
Findings
Certificate of Appropriateness, Section 510.6 (C)
1. The character and appropriateness of the design –
The Hampton Heights Residential Rehabilitation Guidelines states “Retain original wood siding and
repair rather than replace damaged material whenever possible. Whenever replacement is necessary,
replace only deteriorated materials and match the original material in size, shape, texture, and
material. Aluminum or vinyl siding is strongly discouraged. These materials are not successful in
mimicking details of original wood siding (the most common material over which they are applied);
subsequently, their use greatly compromises the historic integrity of buildings. Application often
results in the loss or distortion of architectural details, and improper installation can result in damage
of historic materials.”
Also, The Secretary of the Interior’s Standards for the Treatment of Historic Properties with
Guidelines for Preserving, Rehabilitation, Restoring & Reconstructing Historic Buildings states that
“…identifying, retaining, and preserving wood features that are important in defining the overall
historic character of the building (such as siding, brackets, window, and door surrounds. It is not
recommended to remove or substantially change wood features which are important in defining the
overall historic character of the building so that, as a result, the character is diminished. It is also not
recommended to remove a major portion of the historic wood from a façade instead of repairing or
replacing only the deteriorated wood, then reconstructing the façade with new material to achieve a
uniform or ‘improved’ appearance. When replacement is needed, the new work should match the old
in material, design, scale, color and finish.”
2. The scale of the buildings –
The scale of the building will remain the same.
3. The texture and materials –
The texture and materials of the damaged siding replacement will be MiraTEC Treated Composite
Trim, a wood composite trim that is moisture, rot and termite resistant (For more Information:
https://miratecextira.com/miratec-exterior-trim/)
4. The relationship of such elements to similar features of structures in the immediate
surroundings –
Page 4 of 85
HARB – Meeting Minutes – 2023-12-14 Page 3 of 6
In the vicinity of the project site, staff notice houses having a combination of wood and vinyl sidings.
5. If the property is in a Historic District, the extent to which the alteration or construction would
be harmonious with the Historic District –
Hampton Heights Residential Rehabilitation Guidelines states “… in Hampton Heights, wood is the
predominant exterior wall cladding material. The dominant exterior materials used in a neighborhood
or historic district contribute to the visual relationships among buildings.” The original wood material
should be retained and repaired rather than replaced with a new material. Therefore, the alteration
would NOT be harmonious with the Historic District.
Applicant:
Amy Wilhoit, Owner.
Consultant:
Donnie Love, Preservation Architect
Public Speakers:
None.
Discussion:
While the proposed material MiraTEC does contain wood, it is still a man-made product. The
Guidelines for the Hampton Heights Historic District state that wood siding shall be retained
whenever possible.
Historic District Guidelines across the country require property owners to repair instead of replace,
and when repair isn’t an option, the replacement material must match the original material, the
exception being that the material is not available. Manufactured wood does not meet the Guidelines
because it is not natural wood.
A motion was made by Mr. Brown, seconded Mr. Michels to deny the COA based on not having
proper materials and not meeting guidelines with a vote of 6-0.
New Business:
Certificate of Appropriateness for Major Works – 266 Hydrick Street (TMS: 712-14-172.00) in
the Hampton Heights Neighborhood Historic District. The applicant is seeking approval of the
new construction of a single-family structure on a vacant lot. The property is located in the R-8
SFD (General Residential – Single Family District). Owner/Applicant: Royce Camp, Royce
Camp Construction, LLC.
Project Description and History
The Applicant / Owner / Licensed Builder, Royce Camp, submitted a house design to build a one-
story single-family home at 266 Hydrick Street. Mr. Camp has owned the property for years and is
now prepared to build on the lot. He has taken the time to meet with the Planning Department and
with architect consultant, Donnie Love to make sure the home meets Hampton Heights Historic
District Design Guidelines.
Per the application, the project is described as a new single-family home, 1776 sf heated, double
garage in the rear of the property, with two (2) porches, one in the front and the other in the rear. The
owner is open to design suggestions but has submitted some architectural details with the COA
application.
Page 5 of 85
HARB – Meeting Minutes – 2023-12-14 Page 4 of 6
Analysis
Zoning Ordinance & Hampton Heights Historic Design Manual Consistency
The development request is subject to Section 510 of the City’s Zoning Ordinance, Historic
Preservation. This section enables the Board to review applications involving historic structures and
districts and issue a Certificate of Appropriateness subject to the Standards listed in the Ordinance.
Section 510.4(c) Power and Duties of the Board Review application for and, where appropriate, issue
Certificates of Appropriateness permitting the rehabilitation, alteration, reconstruction, or demolition
of structures on or changes to Historic Sites.
6.1 Defining the Area of Influence – This area should be that which will be visually influenced by
the new construction. A consistent streetscape should be the result when a new home is designed in
consideration to what already exists. Hydrick Street is mostly single story bungalow style homes,
however, the adjoining property has a two-story home, which is one (1) of three (3). Per Hampton
Heights of Spartanburg, there used to be a two story structure at 266 Hydrick St., but was demolished
in the late 1960s (pg. 97).
6.2 Recognizing the Prevailing Character of Existing Development: Identify and respect
the prevailing character of adjacent historic buildings and surrounding development. The
prevailing character of the homes near the subject property can be described as Bungalows.
6.2.1 Building Setback and Orientation: • The orientation of a new building and its site
placement shall appear to be consistent with dominant patterns within the area of influence, if
such patterns are apparent. The orientation and setbacks of the proposed house will match
those of the surrounding houses. The house shall be required to meet the R-8/SFD district
standards which stipulates that the front setback shall be 30 feet and the side setbacks shall be
eight feet. The 30-foot setback requirement does not appear to be similar to the other
surrounding properties on the street. The applicant may be required to apply for Variance
before the Board of Zoning Appeals to allow the home constructed to be similarly placed on
the lot as other homes on the street. Furthermore, the side setback extends beyond the required
8-foot interior side setback by 3 feet, but will be approximately 10 feet from 270 Hydrick St.
6.2.2 Directional Emphasis: • A new building’s directional emphasis shall be consistent with
dominant patters of directional emphasis within the area of influence, if such patterns are
present. The proposed house will have a horizontal directional emphasis. This is compatible
with the directional emphasis of the surrounding homes.
6.2.3 Shape: • Roof Pitch: The roof pitch of a new building shall be consistent with those of
existing buildings within the Area of Influence, if dominant patterns are apparent. Staff needs
additional details regarding the roof pitch. At this time the owners states that the Above
Finished Floor height will be 24 ft.
• Porch Form: The shape and size of a new porch shall be consistent with those of existing
historic buildings within the area of influence, if dominant patterns are apparent. Staff does
not have exact measurements of the porch. The proposed porch is not similar to dominant
patterns along Hydrick Street.
• Building Elements: The principal elements and shapes used on the front façade of a new
building shall be compatible with those of existing buildings on the area of influence, if
dominant patterns are apparent. The owner / builder plans to use wood for the siding and
porch floor boards. The builder is also considering wood shake for the front gable, which
matches homes along Hydrick Street.
6.2.4: Massing • Massing has to do with way in which a building’s volumetric components
(i.e., main body, roof, bays, overhangs, and porches) are arranged and with the relationship
between solid wall surfaces and openings. The massing of a new building shall be consistent
with dominant massing patterns of existing buildings in the area of influence, if such patterns
Page 6 of 85
HARB – Meeting Minutes – 2023-12-14 Page 5 of 6
are apparent. The proposed house will have a massing that is similar to those of the
surrounding homes.
6.2.5: Proportion: • The proportions of a new building shall be consistent with dominant
patterns of existing buildings in the area of influence, if such patterns are apparent.
6.2.6 Rhythm: • New construction in a historic area shall respect and not disrupt existing
rhythmic patterns in the area of influence. The owner intends to continue the rhythmic pattern
of the housing layout along Hydrick Street.
6.2.7 Scale/Height: New construction in historic areas shall be consistent with dominant
patterns of scale with the area of influence, if such patterns are present. The proposed house
will have a similar scale to that of the nearby houses in that it will be roughly the same height
and size.
Findings
Certificate of Appropriateness, Section 510.6 (C)
1. The character and appropriateness of the design –
To be determined by members of the Architectural and Historic Review Board. The owner states
that the home will be a 1940s era bungalow design with three (3) bedrooms and two (2) full
bathrooms. The exterior brick will have a brick crawl space, wood windows as 4 over 1, along
with a wooden front door with glass panels. The proposed exterior color will be light gray siding,
white trim with a stained wooden front door.
2. The scale of the buildings –
The proposed scale of the new structure will match adjacent residential properties. The adjoining
property is two-story, whereas this home will be a single story structure. However, the remaining
properties appear to be single story homes. All of the lots have the same measurements,
including the front width of each lot. Right now the building’s footprint exceeds the setbacks for
the R-8 SFD of Hampton Heights, which is below. The proposed layout sits 5 ft from the
property line on the south, which allows for a striped driveway on the north. The owner states
that the front porch will be aligned with the neighboring property. Planning Staff did advise Mr.
Camp that he may be required to apply for a zoning Variance to allow for the structure to be built
beyond the setback.
The property owner also stated that the AFF (above finished floor) is 24 ft.
3. The texture and materials –
The applicant plans to use wood materials from the siding and for the porch floor boards. The
foundation will be brick masonry and will not be painted. Proposed additional materials include
wood shake to cover the façade of the front of the gable roof.
4. The relationship of such elements to similar features of structures in the immediate
surroundings –
The applicant plans to match features of structures in the immediate surroundings, including the
home’s front setback. Also, include wood shake would match homes along Hydrick St. The
porch style is different from adjacent properties.
5. If the property is in a Historic District, the extent to which the alteration or construction would
be harmonious with the Historic District –
Currently the lot is vacant; the addition of a residential structure will be harmonious with the
Historic District.
Applicant:
Royce Camp, Royce Camp Construction, LLC.
Page 7 of 85
HARB – Meeting Minutes – 2023-12-14 Page 6 of 6
Consultant:
Donnie Love, Preservation Architect
Public Speakers:
None.
Discussion:
Table the item for a meeting of the applicant, staff member(s), Mr. Love and a board member to
discuss and review the final plans. Once reviewed the applicant can come before the board next
month to present the updated plans.
A motion was made by Mr. Michels, seconded Mr. Brown to table the COA to meet for final
submittal and review of the proposed project with a vote of 6-0.
The meeting was adjourned at 6:19 PM.
______________________________
Bill Michels , Vice Chairman
Page 8 of 85
Planning Department
PO Box 1749 • Spartanburg, SC 29304 • phone: (864) 596-2068 • email: planning@cityofspartanburg.org
website: www.cityofspartanburg.org
TO: The Board of Architectural Design and Historic Review
RE: Certificate of Appropriateness for Major Works – 266 Hydrick Street (TMS: 712-14- 172.00) in the
Hampton Heights Neighborhood Historic District. The applicant is seeking approval of the new
construction of a single-family structure on a vacant lot. The property is located in the R-8 SFD (General
Residential – Single Family District). Owner/Applicant: Royce Camp, Royce Camp Construction, LLC.
Date: December 6, 2023
Project Description and History
The Applicant / Owner / Licensed Builder, Royce Camp, submitted a house design to build a one story single family
home at 266 Hydrick Street. Mr. Camp has owned the property for years and is now prepared to build on the lot.
He has taken the time to meet with the Planning Department and with architect consultant, Donnie Love to make
sure the home meets Hampton Heights Historic District Design Guidelines.
Per the application, the project is described as a new single family home, 1776 sf heated, double garage in the rear
of the property, with two (2) porches, one in the front and the other in the rear. The owner is open to design
suggestions, but has submitted some architectural details with the COA application.
Analysis
Zoning Ordinance & Historic Design Manual Consistency
The development request is subject to Section 510 of the City’s Zoning Ordinance, Historic Preservation. This
section enables the Board to review applications involving historic structures and districts and issue a Certificate of
Appropriateness subject to the Standards listed in the Ordinance. Section 510.4(c) Power and Duties of the Board
Review application for and, where appropriate, issue Certificates of Appropriateness permitting the rehabilitation,
alteration, reconstruction, or demolition of structures on or changes to Historic Sites.
Page 9 of 85
6.1 Defining the A rea of Influence – This area should be that which will be visually influenced by the new
construction. A consistent streetscape should be the result when a new home is designed in consideration to what
already exists. Hydrick Street is mostly single story bungalow style homes, however, the adjoining property has a
two-story home, which is one (1) of three (3). Per Hampton Heights of Spartanburg, there used to be a two story
structure at 266 Hydrick St., but was demolished in the late 1960s (pg. 97).
6.2 Recognizing the Prevailing Character of Existing Development: Identify and respect the prevailing character
of adjacent historic buildings and surrounding development. The prevailing character of the homes near the subject
property can be described as Bungalows.
6.2.1 Building Setback and Orientation: • The orientation of a new building and its site placement shall
appear to be consistent with dominant patterns within the area of influence, if such patterns are apparent.
The orientation and setbacks of the proposed house will match those of the surrounding houses. The house
shall be required to meet the R-8/SFD district standards which stipulates that the front setback shall be 30
feet and the side setbacks shall be eight feet. The 30-foot setback requirement does not appear to be similar
to the other surrounding properties on the street. The applicant may be required to apply for Variance before
the Board of Zoning Appeals to allow the home constructed to be similarly placed on the lot as other homes
on the street. Furthermore, the side setback extends beyond the required 8- foot interior side setback by 3
feet, but will be approximately 10 feet from 270 Hydrick St.
6.2.2 Directional Emphasis: • A new building’s directional emphasis shall be consistent with dominant
patters of directional emphasis within the area of influence, if such patterns are present. The proposed
house will have a horizontal directional emphasis. This is compatible with the directional emphasis of the
surrounding homes.
6.2.3 Shape: • Roof Pitch: The roof pitch of a new building shall be consistent with those of existing
buildings within the Area of I nfluence, if dominant patterns are apparent. Staff needs additional details
regarding the roof pitch. At this time the owners states that the Above Finished Floor height will be 24 ft.
• Porch Form: The shape and size of a new porch shall be consistent with those of existing historic buildings
within the area of influence, if dominant patterns are apparent. Staff does not have exact measurements of
the porch. The proposed porch is not similar to dominant patterns along Hydrick Street.
• Building Elements: The principal elements and shapes used on the front façade of a new building shall be
compatible with those of existing buildings on the area of influence, if dominant patterns are apparent. The
owner / builder plans to use wood for the siding and porch floor boards. The builder is a lso considering
wood shake for the front gable , which matches homes along Hydrick Street.
6.2.4: Massing • Massing has to do with way in which a building’s volumetric components (i.e., main body,
roof, bays, overhangs, and porches) are arranged and with the relationship between solid wall surfaces and
openings. The massing of a new building shall be consistent with dominant massing patterns of existing
buildings in the area of influence, if such patterns are apparent. The proposed house will have a
massing that is similar to those of the surrounding homes.
6.2.5: Proportion: • The proportions of a new building shall be consistent with dominant patterns of
existing buildings in the area of influence, if such patterns are apparent.
6.2.6 Rhythm: • New construction in a historic area shall respect and not disrupt existing rhythmic patterns
in the area of influence. The owner intends to c ontinue the rhythmic pattern of the housing layout along
Hydrick Street.
6.2.7 Scale/Height: New construction in historic areas shall be consistent with dominant patterns of scale
with the area of influence, if such patterns are present. The proposed house will have a similar scale to that
of the nearby houses in that it will be roughly the same height and size.
Page 10 of 85
Findings
Certificate of Appropriateness, Section 510.6 (C)
a. The character and appropriateness of the design –
To be determined by members of the Architectural and Historic Review Board. The owner states that the home will
be a 1940s era bungalow design with three (3) bedrooms and two (2) full bathrooms. The exterior brick will have a
brick crawl space , wood windows as 4 over 1, along with a wooden front door with glass panels. The proposed
exterior color will be light gray siding, white trim with a stained wooden front door.
b. The scale of the buildings –
The proposed scale of the new structure will match adjacent residential properties. The adjoining property is two-
story, whereas this home will be a single story structure. However, the remaining properties appear to be single
story homes. All of the lots have the same measurements, including the front width of each lot. Right now the
building’s footprint exceeds the setbacks for the R-8 SFD of Hampton Heights, which is below. The proposed layout
sits 5 ft from the property line on the south, which allows for a striped driveway on the north. The owner states that
the front porch will be aligned with the neighboring property. Planning Staff did advise Mr. Camp that he may be
required to apply for a zoning Variance to allow for the structure to be built beyond the setback.
The property owner also stated that the AFF (above finished floor) is 24 ft.
c. The texture and materials –
The applicant plans to use wood materials from the siding and for the porch floor boards. The foundation will be
brick masonry and will not be painted. Proposed additional materials include wood shake to cover the façade of
the front of the gable roof.
d. The relationship of such elements to similar features of structures in the immediate surroundings –
The applicant plans to match features of structures in the immediate surroundings, including the home’s front
setback. Also, include wood shake would match homes along Hydrick St. The porch style is different from adjacent
properties.
e. If the property is in a Historic District, the extent to which the alteration or construction would be harmonious
with the Historic District –
Currently the lot is vacant; the addition of a residential structure will be harmonious with the Historic District.
Page 11 of 85
Submitted by:
Tia Keitt
Tia Keitt, AICP /Planner II
Staff Report includes:
COA Major Works Application Permit # 23-0400058
Photos / Sketches / Zoning Map
Page 12 of 85
Page 13 of 85
Page 14 of 85
Page 15 of 85
Page 16 of 85
Page 17 of 85
Page 18 of 85
Page 19 of 85
Page 20 of 85
Page 21 of 85
Page 22 of 85
Page 23 of 85
Page 24 of 85
Planning Department
PO Box 1749 • Spartanburg, SC 29304 • Phone: (864) 596-2068 • email: planning@cityofspartanburg.org
website: www.cityofspartanburg.org
TO: The Board of Architectural Design and Historic Review
RE: Certificate of Appropriateness for Major Works – Applicant is seeking approval of a Certificate of
Appropriateness to replace windows in newly purchased home with new vinyl windows. The property
is located at 728 Reynolds St. in Beaumont Mill Village Historic District and is currently zoned as R-
6, General Residential District. (TMS # 7 -08-15-119.00). Owner/Applicant: Gergley Properties,
LLC; Contractor: Lowes.
Date: January 5th, 2024
Project Description and History
The project site is located on an approximately 6,703 square foot lot in the Beaumont Mill Village Historic
District. The site is located on the west side of Reynolds St. and east side of Isom St.. The site currently contains
one single-family home that was constructed in 19 10. This residential structure is a vinyl- framed bungalow
with a brick foundation. The structure has an open porch in front of the house. This residential structure has a
gable roof with composite shingle.
Originally, the applicant was seeking approval from the Board of Architectural Design and Historical Review
to replace windows with new vinyl windows.
*Please Note: The applicant requested an
adjustment to the application after learning vinyl windows is
not allowed in Historic D istrict. The applicant NOW is proposing to replace the windows with either
wood or aluminum clad wood windows (Jamb White Endurable Clad Wood Dual-pane Double Hung
Windows).
Analysis
Zoning Ordinance and Historic Design Manual Consistency
The project site is located in the Beaumont Mill Village Historic District which has design guidelines for
development. These guidelines are outlined in the Beaumont Village Design Guidelines for the City of
Spartanburg Historic Di strict Preservation Principles and Approaches . The purpose of the Guidelines is to
provide property owners guidance for the preservation and protection of historic and architecturally valuable
districts and sites in the City. The project is also subject to Section 510 of the City’s Zoning Ordinance, Historic
Preservation. This section allows the Board to review applications involving historic structures and districts
and issue a Certificate of Appropriateness subject to the Standards listed in the Ordinance.
The project site has a zoning designation of R-6, General Residential District, which allows for single family
dwelling units. Section 510.6 of the City of Spartanburg Zoning Ordinance list standards for reviewing
Certificate of Appropriateness. Specifically, Section 510.6 (C)(2) states that in reviewing applications for new
construction or alteration, the board shall consider the U.S. Secretary of the Interior’s Standards for
Rehabilitation and the five criteria listed in the findings.
Findings
Certificate of Appropriateness, Section 510.6 (C)
1. The character and appropriateness of the design –
Page 25 of 85
Page 2 of 13
Currently, the windows installed in the house are wood, two over two windows. The new proposed
windows from the applicant are Jamb white Endura ble clad wood dual pane double hung windows OR
wood windows. The design of the window is one over one.
The Secretary Of The Interior’s Standards For The Treatment Of Historic Property Guidelines s tates that
“Wood is one of the most essential materials used in American buildings of every period and style.
Identifying, retaining, and preserving windows and their functional and decorative features that are
important to the overall historic character of the building. It is not recommended to replace windows rather
than maintaining the sash, frame, or glazing. It is recommended to evaluate the overall condition of
windows to determine whether more than protection and maintenance, such as repairs to windows and
windows features, will be necessary. If the window is beyond repair, replacing in kind extensively
deteriorated or missing components of windows when there are surviving prototypes, such as frames or
sash, or when the replacement can be based on documentary or physical evidence. The new work should
match the old in material, design, scale, color, and finish. It is not recommended to replace an entire
window when limited replacement of deteriorated or missing components is appropriate and to use
replacement material that does not match the historic window.”
2. T
he scale of the buildings –
The scale of the building will remain the same. Replacing the windows will not change the overall square
footage of the house.
3. The texture and materials –
The texture and materials of the windows, from the applicant’s newly proposed windows, will be Jamb
white Endura clad wood dual-pane double hung window OR wood windows.
4. The relationship of such elements to similar features of structures in the immediate surroundings
–
Properties in the vicinity of the project site have a combination of wood windows and vinyl windows.
Unfortunately, at this time, staff could not make a determination in terms of double -pane vs. single pane
windows from the surrounding properties.
5. If the property is in a Historic District, the extent to which the alteration or construction would be
harmonious with the Historic District –
Along Reynolds St., houses surrounding the project site have a mixed types of windows in terms of style,
design, materials and texture. However, based on the Interior’s Standards Guidelines, it is not
recommended to replace an entire window when limited replacement of deteriorated or missing
components is appropriate and to use replacement material that does not match the historic window.
Submitted by:
Nan Zhou, AICP
City Planner II
City of Spartanburg Planning Department
Attachments:
Conditions of Approval
Application
Photos – Site Photos
Specifications / Style of Proposed Windows
Page 26 of 85
Page 3 of 13
CONDITIONS OF APPROVAL FOR THE PROJECT ON PROPERTY AT:
728 Reynolds St., Beaumont Mill Village Historic District
Certificate of Appropriateness for Major Works – Permission to Replace windows with Wood OR
Endura Cald Wood Windows (New Proposal)
Zoning District: R-6, General Residential District; Landowner: Gergley Properties, LLC /
Contractor: Lowes
1. If one or more of the following conditions is not met with respect to all its terms, then this approval may be
revoked.
2. All plans for future construction which are not covered by this review shall be submitted to the City Planning
Department for review and approval.
3. Major modifications to plans or exceptions to completion may be granted only by the City authority which
approved the project.
4. T
his permit shall be exercised within six months of the date of final approval , or it shall become null and
void. Extensions may be granted with permission of the Board.
5.
A building permit shall be obtained from the Building Department prior to commencement of work.
6. The development of the site shall be in substantial accordance with the approved plans submitted and on file
in the Spartanburg City Planning Department. Major modifications to plans or exceptions to completion may
be granted only by the City authority which approved the project.
Page 27 of 85
Page 4 of 13
SITE MAP – 728 Reynolds St.
Page 28 of 85
Page 5 of 13
ZONING MAP – 728 Reynolds St.
Page 29 of 85
Page 6 of 13
Photo – Front
Page 30 of 85
Page 7 of 13
Photo – Left Side
Page 31 of 85
Page 8 of 13
Photo – Right Side
Page 32 of 85
Page 9 of 13
Photo – Property to the Left
Page 33 of 85
Page 10 of 13
Photo – Properties to the Right
Page 34 of 85
Page 11 of 13
Photo – Property Across from the Project Site
Page 35 of 85
Page 12 of 13
Photo – Properties to the Left Side from the Project Site
Page 36 of 85
Page 13 of 13
Photo – Properties Across from the Project Site
Page 37 of 85
Page 38 of 85
Page 39 of 85
Page 40 of 85
Page 41 of 85
Page 42 of 85
Page 43 of 85
Planning Department
PO Box 1749 • Spartanburg, SC 29304 • phone: (864) 596-2068 • email: planning@cityofspartanburg.org
website: www.cityofspartanburg.org
TO: T HE BOARD OF ARCHITECTURAL DESIGN AND HISTORIC REVIEW
RE: Certificate of Appropriateness for Major Works – 150 W. Hampton Dr . (TMS: 7 -16-02-
054.00). The applicant is seeking approval of the installation of a small shed on the site. The
property is located in the Hampton Heights Neighborhood Historic District, zoned R- 8 SFD
(General Residential – Single Family District). Owner/Applicant: David. A. Williams.
Date: January 6, 2024
Project Description and History
Applicant /Owner would like to place a prefabricated shed in the rear of his property. The shed is a size
10’ x 12’, and being under 200sf, the structure does not require a permit from the Building Department.
The proposed location makes the shed partially visible from the sidewalk while standing in front of the
driveway. The applicant plans to follow the zoning code regarding placement of the shed; per the City
of Spartanburg Zoning Code §501.4 Accessory Buildings in Residential Districts, accessory buildings
shall be located not less than five (5) feet from any side or rear lot line.
Page 44 of 85
Analysis
Zoning Ordinance & Historic Design Manual Consistency
The COA request is subject to Section 510 of the City’s Zoning Ordinance, Historic Preservation. This
section enables the Board to review applications involving historic structures and districts and issue a
Certificate of Appropriateness subject to the Standards listed in the Ordinance. Section 510.4(c) Power
and Duties of the Board : [to] Review application for and, where appropriate, issue Certificates of
Appropriateness permitting the rehabilitation, alteration, reconstruction, or demolition of structures on
or changes to Historic Sites.
Findings
Certificate of Appropriateness, Section 510.6 (C)
a. The character and appropriateness of the design –
The applicant has chosen a prefabricated shed from a local retailer. The size is 10ft x 12ft with a maximum
height of 7ft at the roof’s peak. The shed will be wrapped in vertical siding . The owner has chosen the
shed with a single door entrance and a small window in the front. The owner plans to position the shed
along the same property line as the driveway (behind the 6ft gate), so the door to the shed is facing west.
The side of the shed will be seen from the sidewalk, specifically the top portion / roof view.
b. The scale of the buildings –
The scale of the house will not be impacted by the addition of the shed.
c. The texture and materials –
Standard shingled roof (25-year asphalt shingles) with typical siding material. The shed also
includes: 2’ x 2’ window next to the door and two, 8” x 16” wall vents allow for air flow
throughout the building.
d. The relationship of such elements to similar features of structures in the immediate surroundings –
Sheds are a common feature for homes wi thin Hampton Heights. Most appear to be just as old as the
original home, or added to the site years ago. Staff observed wooden sheds that are partially seen from
the sidewalk so the additional structure is a similar feature in the immediate surrounding.
e. If the property is in a Historic District, the extent to which the alteration or construction would
be harmonious with the Historic District –
Sheds are a common accessory structure within the Hampton Heights Historic District, so the addition
will be harmonious with the Historic District.
Submitted by:
Tia Keitt
Tia Keitt, AICP /Planner II
Staff Report includes:
COA Major Works Application Permit # 23-0400084
Page 45 of 85
Shed to be installed behind the gate, just on the other side of the tree.
Page 46 of 85
Location for proposed shed
Opposite view of the yard (property line to the west)
Page 47 of 85
Zoning Map R-8 Single Family Zoning
Page 48 of 85
Page 49 of 85
Page 50 of 85
Page 51 of 85
Page 52 of 85
Page 53 of 85
Page 54 of 85
Page 55 of 85
Planning Department
PO Box 1749 • Spartanburg, SC 29304 • Phone: (864) 596-2068 • email: planning@cityofspartanburg.org
website: www.cityofspartanburg.org
TO: The Board of Architectural Design and Historic Review
RE: Certificate of Appropriateness for Major Works – Applicant is seeking approval of a Certificate of
Appropriateness to replace 8 windows with new windows that meet the HARB specifications. The
property is located at 527 Beaumont Ave. in Beaumont Mill Village Historic District and is currently
zoned as R-6, Genera l Residential District. (TMS # 7 -08-15-118.00). Owner/Applicant: Virginia
Painter; Contractor: Taylor France, Neely’s.
Date: January 4th, 2024
Project Description and History
The project site is located on an approximately 7,040 square foot lot in the Beaumont Mill Village Historic
District. The site is located on the east side of Beaumont Ave. The site currently contains one single -family
home that was constructed in 1910. This residential structure is a wood-framed bungalow with a brick
foundation. The structure has an open porch in front of the house. This residential structure has a gable roof
with comp shingle.
The applicant is seeking approval from the Board of Architectural Design and Historical Review to install 8
windows (Aluminum-clad wood hung, simulated divided lite, double pane windows) on the house.
Analysis
Zoning Ordinance and Historic Design Manual Consistency
The project site is located in the Beaumont Mill Village Historic District which has design guidelines for
development. These guidelines are outlined in the Beaumont Village Design Guide lines for the City of
Spartanburg Historic Di strict Preservation Principles and Approaches . The purpose of the Guidelines is to
provide property owners guidance for the preservation and protection of historic and architecturally valuable
districts and sites in the City. The project is also subject to Section 510 of the City’s Zoning Ordinance, Historic
Preservation. This section allows the Board to review applications involving historic structures and districts
and issue a Certificate of Appropriateness subject to the Standards listed in the Ordinance.
The project site has a zoning designation of R-6, General Residential District, which allows for single family
dwelling units. Section 510.6 of the City of Spartanburg Zoning Ordinance list standards for reviewing
Certificate of Appropriateness. Specifically, Section 510.6 (C)(2) states that in reviewing applications for new
construction or alteration, the board shall consider the U.S. Secretary of the Interior’s Standards for
Rehabilitation and the five criteria listed in the findings.
Findings
Certificate of Appropriateness, Section 510.6 (C)
1. The character and appropriateness of the design –
Currently, the windows installed in the house are wood windows . The proposed windows are factory-
assembled extruded alum inum-clad wood window with sash installed in the frame . The design of the
window is two over two.
Th e Secretary Of The Interior’s Standards For The Treatment Of Historic Property Guidelines states that
“Wood is one of the most essential materials used in American buildings of every period and style.
Page 56 of 85
Page 2 of 13
Identifying, retaining, and preserving windows and their functional and decorative features that are
important to the overall historic character of the building. It is not recommended to replace windows rather
than maintaining the sash, frame, or glazing. It is r ecommended to evaluate the overall condition of
windows to determine whether more than protection and ma intenance, such as repairs to windows and
windows features, will be necessary. If the window is beyond repair, replacing in kind extensively
deteriorated or missing components of windows when there are surviving prototypes, such as frames or
sash, or when the replacement can be based on documentary or physical evidence. T he new work should
match the o ld in mate rial, design, scale, color, and finish. It is not re commended to replace an entire
window when limited replacement of deteriorated or missing components is appropriate and to use
replacement material that does not match the historic window.”
2. The scale of the buildings –
The scale of the building will remain the same. Replacing the windows will not change the overall square
footage of the house.
3. The texture and materials –
The texture and materials of the windows will be factory-assembled extruded aluminum -clad wood
window with sash installed in the frame.
4. The relationship of such elements to similar features of structures in the immediate surroundings
–
Properties in the vicinity of the project site have a combination of wood windows and vinyl windows.
Unfortunately, at this time, staff c ould not make a determination in terms of double -pane vs. single pane
windows from the surrounding properties.
5. If the property is in a Historic District, the extent to which the alteration or construction would be
harmonious with the Historic District –
Along Beaumont Ave., houses surrounding the project site have a mixed type s of windows in terms of
style, design, materials and texture. However, based on the Interior’s Standards Guidelines, it is not
recommended to replace an entire window when limited replacement of deteriorated or missing
components is appropriate and to use replacement material that does not match the historic window.
Submitted by:
Nan Zhou, AICP
City Planner II
City of Spartanburg Planning Department
Attachments:
Conditions of Approval
Application
Photos – Site Photos
Specifications / Style of Proposed Windows
CONDITIONS OF APPROVAL FOR THE PROJECT ON PROPERTY AT:
Page 57 of 85
Page 3 of 13
527 Beaumont Ave., Beaumont Mill Village Historic District
Certificate of Appropriateness for Major Works – Permission to Replace 8 Windows with New
Windows in the House
Zoning District: R-6, General Residential District; Landowner: Virginia Painter / Contractor:
Taylor France, Neely’s
1. If one or more of the following conditions is not met with respect to all its terms, then this approval may be
revoked.
2. All plans for future construction which are not covered by this review shall be submitted to the City Planning
Department for review and approval.
3. Major modifications to plans or exceptions to completion may be granted only by the City authority which
approved the project.
4. T
his permit shall be exercised within six months of the date of final approval , or it shall become null and
void. Extensions may be granted with permission of the Board.
5.
A building permit shall be obtained from the Building Department prior to commencement of work.
6. The development of the site shall be in substantial accordance with the approved plans submitted and on file
in the Spartanburg City Planning Department. Major modifications to plans or exceptions to completion may
be granted only by the City authority which approved the project.
Page 58 of 85
Page 4 of 13
SITE MAP – 527 Beaumont Ave.
Page 59 of 85
Page 5 of 13
ZONING MAP – 527 Beaumont Ave.
Page 60 of 85
Page 6 of 13
Photo – Front
Page 61 of 85
Page 7 of 13
Photo – Left Side
Page 62 of 85
Page 8 of 13
Photo – Right Side
Page 63 of 85
Page 9 of 13
Photo – Property to the Left
Page 64 of 85
Page 10 of 13
Photo – Properties to the Right
Page 65 of 85
Page 11 of 13
Photo – Street View from Across from the Project Site
Page 66 of 85
Page 12 of 13
Photo – Properties to the Left Side from the Project Site
Page 67 of 85
Page 13 of 13
Photo – Properties to the Right Side of the Project Site
Page 68 of 85
Page 69 of 85
Page 70 of 85
Section 3
October 2016
Sun Windows, Inc. • 1515 E. 18th St. • Owensboro, KY 42303 • Office: (270) 684-0691 Fax: (270) 926-6452 • email: info@sunwindows.com • web: www.sunwindows.com page 150
SunClad USA Comfort-Tilt Double Hung - Specifications
Section 08550
Aluminum-Clad Wood Hung Windows
PART 1 GENERAL
1.01 SECTION INCLUDES
A.
F
actory-assembled extruded aluminum-clad wood hung window
B.
Glass and glazing
C.
W
eatherstripping, hardware, [insect screens],[muntin bars]
D.
A
nchorages, attachments, and shims
1.02 RELATED SECTIONS
A.
S
ection [04200 – Unit Masonry]: Units in Masonry
B.
S
ection [0610 – Rough Carpentry]: Framed openings
C.
S
ection [07210 – Building Insulation]: Batt insulation at window perimeter
D.
S
ection [07900 – Joint Sealers]: Perimeter Joint Sealant and Backer Rod
E.
S
ection [09900 – Painting]: Finishing interior wood, including removable grilles
1.03 REFERENCES
A.
A
merican Society for Testing and Materials (ASTM)
1.
ASTM C 1048-04 – Specifica
tion for Heat Treated Float Glass-Kind HS, Kind FT Coated & Uncoated.
2.
ASTM C 1036-06 - Specifica
tion for Flat Glass
3.
ASTM E 1300-09 -S
tandard Practice for Determining Load Resistance of Glass in Buildings
4.
ASTM 2188-02 –
Test Method for Seal Durability of Insulating Glass Units
5.
ASTM E 2190-08 – S
tandard Specification For Insulating Glass unit Performance & Evaluation
6.
ASTM E 283– R
ate of Air Leakage Through Exterior Windows, Curtain Walls and Doors Under Specified Pressure Difference
Across the Specimen
7.
ASTM E 330– S
tructural Performance of Exterior Windows, Curtain Walls and Doors by Uniform Static Air Pressure Difference
8.
ASTM 547–
Water Penetration of Exterior Windows, Curtain Walls and Doors by Cyclic Static Air Pressure Differential
9.
ASTM F 588– M
easuring the Forced Entry Resistance of Window Assemblies, Excluding Glazing
B.
W
indow and Door Manufacturers Association (WDMA)
1.
WDM
A I.S.-2 – Industry Standard for Wood Windows
2.
WDM
A I.S.-4– Industry Standard for Water Repellent Preservative Non-Pressure Treatment for Millwork
C.
A
merican Architectural Manufacturers Association (AAMA)
1.
AA
MA 701-04 & 702-04 – Combined Voluntary Specification for Pile Weatherstripping and Voluntary Specification for
Replacement fenestration Weatherseals.
2.
AA
MA 2603-02 – Voluntary Specification for Pigmented Organic Coatings on Aluminum Extrusions and Panels.
3.
AA
MA 2604-Voluntary Specification Performance Requirements and Test Procedures for High Performance Organic Coatings
on Aluminum Extrusions and Panels
4.
AA
MA 2605-Voluntary Specification Performance Requirements and Test Procedures for Superior Organic Coatings on
Aluminum Extrusions and Panels
D.
Na
tional Fenestration Rating Council (NFRC):
1.
NFR
C 100-2004 – Procedure for Determining Fenestration product U-Factors
2.
NFR
C 200-2004 – Procedure for Determining Fenestration Product Solar Heat Gain Coefficient at Normal Incidence
1.04 PERFORMANCE REQUIREMENTS
A.
W
indow units shall meet Rating H-R30 specifications in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-05, except where more
stringent requirements are specified. (Optional Rating: H-R45, H-R50)
B.
W
indow unit air leakage, when tested in accordance with ASTM E 283 Shall be 0.30 cfm/ft• of frame or less.
C.
No w
ater penetration beyond the interior face of the window when tested in accordance with ASTM E 547 under static
pressure of 4.5 psf (42 mph) after 4 cycles of 5 minutes each separated by 1 minute with pressure released, with water being
applied continuously, at a rate of 5 gallons per hour per square foot. (Optional Pressure of 7.5 psf (54 mph) for more stringent
requirements)
D.
W
indow units shall withstand positive and negative pressures of 45.0 psf (133 mph) acting normal to the plane of the window.
Units shall have no permanent deformation in excess of 1/175 of its span when tested in accordance with ASTM E 330. (Optional
Pressure of up to 75psf (172 mph) for more stringent requirements)
E.
W
indow shall comply with Forced Entry Resistance requirements for a Level 10, when tested in accordance with ASTM F 588.
F.
W
indow units shall be rated, certified, and labeled in accordance with NFRC 100-2004. U-Factors: 0.33 Cardinal E270 LowE glass
(Specific glazing options and values may be obtained from the Product Data Sheet on the web)
G.
W
indow units shall be rated, certified and labeled in accordance with NFRC 200-2004. Solar Heat Gain Coefficient: 0.29 Cardinal
E270 LowE glass (Specific glazing options and values may be obtained from the Product Data Sheet on the web)
Page 71 of 85
Section 3
October 2016
Sun Windows, Inc. • 1515 E. 18th St. • Owensboro, KY 42303 • Office: (270) 684-0691 Fax: (270) 926-6452 • email: info@sunwindows.com • web: www.sunwindows.com page 151
SunClad USA Comfort-Tilt Double Hung - Specifications
Section 08550
Aluminum-Clad Wood Hung Windows
1.05 SUBMITTALS
A.
Submit in ac
cordance with conditions of Division 1 requirements and the contract.
B.
P
roduct Data: Submit Manufacturers product data.
C.
Shop Dr
awings: Typical jamb, head and sill details showing layout and installation of typical and composite members, necessary
dimensioning, hardware and mulled unit details. Submit elevations indicating location and type of glazing material.
D.
S
amples: Provide (1) complete window assembly for approval of color, glazing systems and Quality of construction.
1.06 QUALITY ASSURANCE
A.
P
rovide proof of compliance with AAMA/WDMA/CSA 101/I.S.2/A440-08, ASTM 2190-08 rating for Seal Durability of Insulating
Glass Units
1.07 PROJECT CONDITIONS
A.
F
or renovation projects, all actual window openings will be checked by accurate field measurement before fabrication.
B.
C
oordinate window fabrication schedule with construction progress to avoid delays.
1.08 DELIVERY , STORAGE, AND HANDLING
A.
D
eliver materials to job site in manufacturers packaging undamaged, complete with installation instructions.
B.
S
tore windows and accessories off ground, under cover, protected from weather and construction activities.
PART 2 PRODUCTS
2.01 MANUFACTURERS
A.
SunClad USA D
ouble Hung units as manufactured by Sun Windows, Inc., Owensboro, Kentucky: Factory-assembled extruded
aluminum-clad wood window with sash installed in the frame.
2.02 COMPONENTS
A.
F
rame: Select kiln dried Western Pine, water-repellent, preservative –treated in accordance with WDMA I.S. 4. Interior exposed
surfaces clear Western Pine; all exterior surfaces clad with 0.050” extruded aluminum at head, jamb, and sill and incorporate an
integral aluminum nail fin as part of the extrusion. Overall frame depth: 6” (153 mm) for a wall depth of 4-9/16” (116 mm). Optional
factory applied jamb extensions available up to 7-9/16” wall depths. Jamb liner shall be high impact, Exterior weathering grade
polyvinyl chloride with locking clutch balance shoes.
B.
S
ash: Select kiln dried Western Pine, water-repellent, preservative –treated in accordance with WDMA I.S. 4. Interior exposed
surfaces clear Western Pine; all exterior surfaces clad with 0.045” extruded aluminum, mitred. Wood corners lap-jointed, glued and
secured with metal fasteners. Sash thickness: 1-3/8” (35 mm). Glass shall be set to the sash frame using an AAMA approved silicone
glazing material and secured with interior profiled wood stops.
C.
Glazing S
ystem: Sealed insulating glass shall be produced using quality float glass complying with ASTM C-1036-06. [clear/
clear], [clear/argon filled, Low-E II coated]. Various tints, obscure, tempered, and laminated options are also available. Dual sealed
insulating glass will have a 1/2” air space with the revolutionary Duralite™ Warm Edge I.G. Spacer. Insulated glass meets or exceeds
standards required by ASTM E 2190-08.
D.
W
eatherstripping: rigid dual wall parting stop with flexible hinge at head and custom dual durometer bulb at sill: Polyvinyl
chloride leaf style with flexible urethane hinge set into upper sash for tight contact at checkrail. Secondary dual durometer, foam
weatherstrip at bottom sash at sill. Secondary fin-seal weatherstrip at head. PVC jambliner at sides of sash with fin-seal pad at
checkrail. Weatherstrip meets or exceeds standards required by AAMA 702-04.
T
he following five paragraphs specify optional products sold separately. Consult manufacturer and edit accordingly.
E.
I
nsect Screen: [Full] [Half ]size with charcoal vinyl-coated BetterVue® mesh fiberglass screen cloth, set in 0.020” roll form aluminum
frame fitted to inside of window, supplied complete with all necessary hardware. [optional: UltraVue® mesh]
F.
Ex
truded Insect Screen: [Full] [Half ] size with charcoal vinyl-coated BetterVue® mesh fiberglass screen cloth, set in 0.050” extruded
aluminum frame fitted to inside of window, supplied complete with all necessary hardware. [optional: UltraVue® mesh]
G.
I
nterior Removable Wood Grilles: [1” profile], [1-1/4” profile] removable solid wood bars dado and notched at joints and fitted to
sash with clear plastic slide latch with steel pin. Surfaces unfinished [optional: white], ready for site finishing.
H.
Gr
illes- Between- Glass (GBG): [3/4” contour profile], [1/4” profile] Roll form aluminum bars fitted between the panes of glass in
the specified insulated glass unit. 3/4” internal contour grille (GBG) finish shall be baked enamel, 1-color options [white], [sand],
[bronze], [vanilla], and [special]. 2 color options [white/sand], [sand/white], [bronze/white], [white/bronze].
I.
Simula
ted Divided Lite Grilles (SDL): Exterior muntin bars shall be 1/8” thick by 1” wide [optional 1-1/4” wide] [optional: 2-1/4”
wide] profile, solid extruded aluminum bars. Bars shall be adhered to exterior glass surface with black VHB acrylic adhesive tape
and will align with interior muntin, Interior muntin bars shall be of 1” [optional 1-1/4” wide] [optional: 2-1/4” wide] Wood grilles
with acrylic adhesive tape application. Exterior surfaces finished to match window cladding. Interior surfaces unfinished, ready for
site finishing, [optional: white].
Page 72 of 85
Section 3
October 2016
Sun Windows, Inc. • 1515 E. 18th St. • Owensboro, KY 42303 • Office: (270) 684-0691 Fax: (270) 926-6452 • email: info@sunwindows.com • web: www.sunwindows.com page 152
2.03 HARDWARE
A.
Balanc
e System: Spring balances connected to sash and concealed within the jamb liner. Incorporates locking pivot shoe when
tilted 90º.
B.
L
ocks/Keepers/Finger Latches: High-pressure, corrosion resistant, die cast zinc sash lock/keeper factory installed. Two sash locks on
units with 32” frame width or greater. Finger latches for restraining lower sash. Finish shall be baked enamel. Locks meet or exceed
requirements by AAMA 1302.5.
2.04 CERTIFICATIONS
Sun Windows are certified to the following programs, using Independent Testing Laboratories.
A.
WDM
A Hallmark Certification Program
B.
NFR
C (National Fenestration Rating Council)
2.05 FINISH
A.
Ex
terior Finish: Finish shall meet specifications in accordance with AAMA 2604. As selected by customer from manufacturer’s full
range.
B.
I
nterior Finish: Unfinished and ready for site finishing. (Optional White)
PART 3 EXECUTION
3.01 INSTALLATION
A.
I
nspect window openings prior to beginning installation. Verify that the openings are level and plumb and that the minimum
opening dimension (width or height) is 1/4” larger than the window unit. Proceed with installation only after unsatisfactory
conditions have been corrected.
B.
I
nstall window units in accordance with manufacturer’s recommendations, installation & Finishing Instructions and approved shop
drawings.
C.
S
ecure assembly to framed openings, plumb, level and square, without distortion. Provide proper support and anchor securely in
place.
D.
P
lace batt insulation in shim spaces around window perimeter to maintain continuity of building insulation. Do not use expanding
foam insulation.
E.
A
pply sealant and related backing materials at the exterior perimeter of the window units.
F.
L
eave window units closed and locked.
3.02 PROTECTION AND CLEANING
A.
Clean windo
w frames, sash and glass promptly following installation. Avoid damaging protective coatings and finishes. Remove
excess sealants, dirt and other substances.
B.
P
rotect window surfaces and hardware from contact with contaminating substances, such as masonry cleaning solutions. Contact
with certain substances can cause damage to the glass surface and/or could cause seal failure of the insulating glass unit. These
substances could also cause discoloration or damage to painted surfaces. Clean contaminated surfaces immediately after contact.
C.
R
emove nonpermanent labels from glass surfaces per manufacturer’s installation finishing instructions.
D.
R
emove and replace glass that has been broken, chipped, cracked, abraded or damaged during the construction period.
END OF SECTION
Specifications subject to change without notice
SunClad USA Comfort-Tilt Double Hung - Specifications
Section 08550
Aluminum-Clad Wood Hung Windows
Page 73 of 85
6
4 9/16
2 3/8
Unit Width
Glass Size
Unit Width - 5
Daylight Opening
Unit Width - 5 7/8
Glass Size
Unit Height / 2 - 3 3/32
Daylight Opening
Unit Height / 2 - 3 31/32
Unit Height
24 9/16
6 9/16
Optional 2" jamb extension to
make overall jambs 69
16"
Sash Width
Unit Width - 2 5/8
1 11/16
2 15/32
Sash Height
Unit Height / 2 - 23/32
Daylight Opening
Unit Height / 2 - 3 31/32
Glass Size
Unit Height / 2 - 3 3/32
Sash Height
Unit Height / 2 - 21/32
5/8" Sill Nosing Shown
1 1/8" Sill Nosing Optional
1 1/8
Unit Width + 2 7/8
Unit Height + 2 1/16
Page 74 of 85
SCHEDULE
Neelys Windows Doors & More34
495582
Quote Not
Ordered
Ship Date:
Quote:
Order Date: Quote Not Ordered
Painter Residence
Phase 1
Zone:
Quote Name:
Project Name:
PO:
Dealer:
2-3 x 4-3Room: 30 7/8" X 55 1/16"Brickmold:
Unit Size: Rough Opening:28" X 53" 28 1/2" X 53 1/2"
100-1Line#
x 2Quantity:
USA Clad Double Hung 28" x 53"
Overall Dimension = 28" x 53"
Window Model = Comfort-Tilt
Unit Width = Custom, Unit Height = Custom
Exterior Color = White \ Interior Color = Clear Pine
Dual Glazed \ Sun Advantage 270
Sash Locks W/Standard Keeper \ Dark Bronze
Full Screen \ Roll Form \ White
5/8" SDL \ Colonial \ White \ Standard \ Has Shadow Bar Glass 1: \ 2w
Glass 2: Upper Number Wide = 2 Glass 1: 2h
Glass 2: Upper Number High = 2
Traditional Brick Mold (1 3/8") \ White \ Nailing Fin Removed \ 5/8" Sill Nosing
Custom 5.5 Jamb Depth \ Traditional Glass Stop
Jambliner Color = White \ Sill Angle = 12
U-Factor = 0.32 \ SHGC = 0.26 \ CR = 54 \ VT = 0.47 \ CPD = SUN-N-21-00220-00002
2-0 x 4-3 TWINRoom: 56 7/8" X 55 1/16"Brickmold:
Unit Size: Rough Opening:54" X 53" 54 1/2" X 53 1/2"
200-1Line#
x 1Quantity:
USA Clad Double Hung 25" x 53"
Overall Dimension = 54" x 53"
Window Model = Comfort-Tilt
Unit Width = Custom, Unit Height = Custom
Exterior Color = White \ Interior Color = Clear Pine
Dual Glazed \ Sun Advantage 270 \ Unit 1 Lower Glass, 1 Upper Glass: Tempered
Sash Locks W/Standard Keeper \ Dark Bronze
Full Screen \ Roll Form \ White
5/8" SDL \ Colonial \ White \ Standard \ Has Shadow Bar \ 2w 2h
Traditional Brick Mold (1 3/8") \ White \ Nailing Fin Removed \ 5/8" Sill Nosing
Custom 5.5 Jamb Depth \ Traditional Glass Stop
Jambliner Color = White \ Sill Angle = 12
U-Factor = 0.32 \ SHGC = 0.26 \ CR = 54 \ VT = 0.47 \ CPD = SUN-N-21-00220-00002
4" FactoryMull Vertical
------------------------------------------------ Line Item Notes ------------------------------------------------
Both Glass are not set the same
Tempered glass requires additional delivery time.
Both Glass are not set the same
Installation MaterialsRoom:
Unit Size: Rough Opening:300-1Line#
x 1Quantity:
Installation Materials: White Sealant, Shims, Fasteners, Flashing Tape, Spray Foam
Insulation, PVC Sheet/PVC Trim
2of1Page 495582Printed:12/19/2023 3:27:24 PM
Page 75 of 85
Installation MaterialsRoom:
Unit Size: Rough Opening:400-1Line#
x 1Quantity:
Interior Trim Allowance, FJ Primed 356 or Similar
Installation LaborRoom:
Unit Size: Rough Opening:500-1Line#
x 1Quantity:
Installation Labor: Full Frame Replacement of Three Windows with SunClad Comfort Tilt
Double Hung Windows. Labor includes removal and disposal of old windows, and
installation of new windows per manufacturer recommended methods. Labor does NOT
include paint or paint preparation. Labor is licensed and Insured with SC Workman's
Compensation Insurance.
DumpsterRoom:
Unit Size: Rough Opening:600-1Line#
x 1Quantity:
Dumpster/Disposal Fee
2of2Page 495582Printed:12/19/2023 3:27:24 PM
Page 76 of 85
15Sun Windows & Doors / www.sunwindows.com
The Comfort-Tilt is our performance double hung
window. It features uniform sash rails and stiles and a
floating jamb liner with spring balances.
This window features a traditional sash over sash
design. The sashes raise and lower to ventilate and
can be tilted inward for exterior surface access.
Depending on the size of the window, one or two
cam-action locks secure both sashes in the closed
position. A pair of finger-release tilt latches activate
the tilting function. Locking-when-tilted balance shoes
help hold the sash in place when tilted.
Spring balances with locking-when-tilted balance
shoes are housed within the floating vinyl jamb liners.
These jamb liners are located within each side jamb.
Configurations include standard 50/50 sash split as
well 40/60 Cottage and 60/40 Oriel proportions.
Double Hung windows can be mulled together for
multi-wide units or with compatible sized Fixed Lites.
The standard jamb depth is 4-9/16”. A jamb depth of
6-9/16" is achieved with 2" extensions.
Several grille systems are available to add lite division
to the glass area. See the Grille Options section later
in this guide for more information.
Exterior mounted screens are available to help keep
out insects when the sash is open.
Other options include exterior colors, exterior trim,
interior finishes, and additional jamb options. More
information is detailed later in this guide.
Hardware Finishes
• Standard Finishes: White, Tan, Brown, Dark Bronze,
Black
• Upgrade Finishes: Brushed Chrome, Brushed Nickel,
Antique Brass, Polished Brass
Upgrade finishes available at additional cost.
Sizes
• Widths: 20”, 24”, 28”, 32”, 36”, 40”
• Heights: 34-3/16”, 38-3/16”, 46-3/16”, 50-3/16”, 54-
3/16”, 62-3/16”, 66-3/16”, 70-3/16”, 74-3/16”
See website for additional details and information.
S u n U S A
C o m f o r t - T i l t D o u b l e H u n g
White T an Brown Dark Bronze Black
Brushed Nickel, Brushed Chrome, Antique Brass, Polished Brass
Page 77 of 85
QUOTE #:
QUOTE VALID THROUGH: 12/20/2023
4472390-100-1
SERIES: Exterior French & Sash Doors
DOOR DESIGN: 37318
QUANTITY: 1
37318 Thermal Sash (SDL)
SPECIES: Fir
WOOD GRADE: Select
WIDTH: 2-8"
HEIGHT: 6-6"
THICKNESS: 1 3/4"
PROFILE: Ovolo Sticking
GLASS: Clear / Clear
GRILLE: 7/8" Ovolo SDL
PANEL: 3/4" Flat
ADDITIONAL OPTIONS:
UltraBlock® Technology
Cartoned
DOOR SPECIFICATIONS
CERTIFIED DOOR QUOTE
Unnamed Quote
Michael Meacham
Harris Door & Millwork
.COM
Approved
Date
1.800.SIMPSONSIMPSONDOOR
Page 78 of 85
CERTIFIED DOOR QUOTE SUMMARY
100-1 Quantity: 137318 Thermal Sash (SDL) Fir 2-8" x 6-6" x 1 3/4"
CERTIFIED DOOR QUOTE
Unnamed Quote
Michael Meacham
Harris Door & Millwork
.COM
Approved
Date
1.800.SIMPSONSIMPSONDOOR
Page 79 of 85
Page 80 of 85
Page 81 of 85
Page 82 of 85
Page 83 of 85
Page 84 of 85
STAFF APPROVED MINOR WORKS SINCE DECEMBER 14, 2023 MEETING
Approved
Date
Street Address Approved Work
12/19/2023 203 S. Hampton Dr. Applicat ion for a tree removed July 8, 2021
12/22/2023 286 S. Spring St. Replace and repair front porch using like for like
material (wood slats).
Page 85 of 85
Source: City of Spartanburg website. First collected Nov 8, 2026.