09.18.2023 Agenda e-packet
Jasper County · Jasper County · meeting of Sep 18, 2023 · Agenda packets
Open the original document More from Jasper County
Text
Extracted automatically from the original. Tables and formatting may not survive; the original document is authoritative.
Agenda -
09.18.2023 - Page 1
Watch Live via YouTube at:
https://www.youtube.com/@jcmedia3657
Pursuant to Ordinance #08-17, Any citizen of the County
may sign to speak in person at the Council Meeting
(before the Council Meeting’s Regular Meeting start
time) on the Public Comments Sign in Sheet on the Podium to address
Council on matters pertaining to County Services and Operations.
Presentations will be limited to three (3) minutes per person and total
public input will be limited to 30 minutes. Written Public Comments
may also be submitted by 1PM on the date of the Council Meeting by
emailing your comment to: comments@jaspercountysc.gov.
To participate in a Public Hearing for a specific agenda item, you may
either email written public comments to
comments@jaspercountysc.gov by 1:00PM on Monday, September 18,
2023; or you can speak in person at the Council Meeting by signing in
on the Public Hearing Sign In Sheet located outside the Council
Chambers Doors prior to the start of the meeting. Public Hearing
Comments shall be limited to 3 minutes per person.
Instructions may also be found at the Jasper County website
www.jaspercountysc.gov
FOR MORE INFORMATION, PLEASE CALL (843) 717-3696
Agenda -
09.18.2023 - Page 2
JASPER COUNTY COUNCIL
Jasper County Clementa C. Pinckney Government Bldg.
358 3rd Avenue, Ridgeland, SC 29936
Monday, September 18, 2023
5:00PM
Workshop
Workshop with the Jasper County Board of Education
**Executive session to immediately follow the workshop**
1. Call to Order by Chairman Sauls
Clerk’s Report of Compliance with the Freedom of Information Act.
*In compliance with the Freedom of Information Act, notice of meetings and agendas were posted
and furnished to all news media and persons requesting notification*
2. Executive Session SECTION 30-4-70.
(a) A public body may hold a meeting closed to the public for one or more of the following reasons:
(2) Discussion of negotiations incident to proposed contract arrangements and
proposed purchase or sale of property, the receipt of legal advice where the legal
advice related to pending, threatened, or potential claim or other matters covered
by the attorney-client privilege, settlement of legal claims, or the position of the
public agency in other adversary situations involving the assertion against the
agency of a claim – Litigation Update – Davis v. Jasper County; Airport Matters –
Removal of Fuel Tank; Contract Discussion Lease or Purchase of Lektro Aircraft
Tug/GPU; Lavatory Cart and Personnel/Equipment Transport; Ridgeland Fire
Contract; Tax Map #’s 087-00-05-008 & 087-00-05-009; Tax Map # 062-00-03-056;
Tax Map # 063-26-14-002; Tax Map # 063-26-14-001; Tax Map # 067-00-01-010;
Airport Automated Weather Observation Station (AWOS) contract with Trinity
Electric
(5) Discussion of matters relating to the proposed location, expansion, or the provision
of services encouraging location or expansion of industries or other businesses in
the area served by a public body – Prospect Update; Project Refurb
Agenda -
09.18.2023 - Page 3
ANY EXECUTIVE SESSION MATTER ON WHICH DISCUSSION HAS NOT BEEN COMPLETED MAY HAVE
DISCUSSION SUSPENDED FOR PURPOSES OF BEGINNING THE OPEN SESSION AT ITS SCHEDULED TIME, AND
COUNCIL MAY RETURN TO EXECUTIVE SESSION DISCUSSION AFTER THE CONCLUSION OF THE OPEN SESSION
AGENDA ITEMS. PLEASE BE ADVISED THERE MAY BE VOTES BASED ON ITEMS FROM THE EXECUTIVE SESSION.
3: Return to Open Session at 6:30PM
o 3.1 Action coming out of Executive Session
4. Pledge of Allegiance and Invocation:
5. Discussion of Consent Agenda and Agenda Items:
6. Approval of Agenda:
_______________________________________________________________________________________
PRESENTATIONS AND PROCLAMATIONS
_______________________________________________________________________________________
7. None
_______________________________________________________________________________________
RESOLUTIONS
_______________________________________________________________________________________
8. None
______________________________________________________________________________________
PUBLIC HEARINGS, ORDINANCES AND ACTION ITEMS
9. Kim Burgess – Public hearing and 3rd reading of Ordinance #O-2023-17 to Amend Jasper
County Ordinance O-2022-17 for Fiscal Year 2023 Jasper County Budget to Provide for
Amendments to the Budget and to Carryover Approved Lapsing Funds to Fiscal Year 2024, and
to Amen Jasper County Ordinance O-2023-09 for Fiscal Year 2024 Jasper County Budget to
Provide for Amendments to the Budget Lapsing Funds from Fiscal Year 2023 and to Correct an
Error in Section 2 of the Budget Regarding a Mathematical Error. (1st reading 08.21.2023; 2nd
reading 09.05.2023)
10. David Tedder – Consideration of 1 st reading of an Ordinance clarifying that the provisions of
Ordinance O -2023-06, providing that certain property subject to the Development Agreement
entered into by the County and Conduit Street Partners, LLC (CSP) must be conveyed by the
property’s current owner to the developer thereof, includes the developer’s successors and assigns
by recognizing and acknowledging the acquisition may be by an affiliate of CSP, to provide for the
approval of an Exhibit inadvertently omitted, and matters related thereto.
Agenda -
09.18.2023 - Page 4
11. Kim Burgess – Presentation and Consideration of Bids for new roofs for various Jasper County
Buildings.
_______________________________________________________________________________________
CITIZEN COMMENTS
_______________________________________________________________________________________
12. Open Floor to the Public per Ordinance 08-17 Any citizen of the County may sign to speak in person at
the Council Meeting (before the Council Meeting’s 6:30PM start time on the Sign-In Sheet on the
Podium), to address Council on matters pertaining to County Services and Operations. Presentations will
be limited to three (3) minutes per person and total public input will be limited to 30 minutes.
_______________________________________________________________________________________
13. Administrator’s Report
_______________________________________________________________________________________
CONSENT AGENDA
_______________________________________________________________________________________
14. Russell Wells – Consideration of approving the contract for Advanced Life Support Equipment to
include automated CPR Equipment; Transportation Ventilators; AED’s for Sheriff’s Office and in County
Buildings. (This was approved in the FY 23-24 budget, contract amount requires Council approval).
15. Lisa Wagner - 3rd reading of Ordinance #O-2023-15 of an ordinance To Amend Article 6:1
– Table 1, Use Regulations; Article 7:3 – Table 1, Schedule of Lot Area, Yard, Setback, and
Density; Article 11:7, Industry Specific Conditional Use Regulations, Sections 11:7.31, Duplexes;
11:7.32 Townhouses; and 11:7.33, Patio Homes of the Jasper County Zoning Ordinance, to
remove duplexes, townhouses, and patio homes as a conditional use from certain Zoning
Districts, add conditional use requirements, increase the setback requirements and reduce the
allowed density for duplexes, townhomes, and patio homes. (1st reading 08.21.2023; 2nd
reading 09.05.2023)
16. Danny Lucas – Consideration of approving the contract for the AWOS III P/T Project.
17. Approval of the Minutes of 05.15.2023.
_______________________________________________________________________________________
END OF CONSENT AGENDA
_______________________________________________________________________________________
18. Council Members Comments
19. Possible Return to Executive Session to Continue Discussion on Matters Regarding Agenda
Item II.
Agenda -
09.18.2023 - Page 5
20. Adjournment:
*Council may act on any item appearing on the agenda including items discussed in executive session.
In accordance with South Carolina Code of Laws, 1976, Section 30-4-80(d), as amended, notification of the
meeting was posted on the County Council Building at a publicly accessible place and on the county website
at least 24 hours prior to the meeting. A copy of the agenda was given to the local news media and posted
at the meeting location twenty-four hours prior to the meeting.
Special Accommodations Available Upon Request to Individuals with Disabilities
(843) 717-3696
1
STATE OF SOUTH CAROLINA
JASPER COUNTY
ORDINANCE NUMBER O-2023-17
AN ORDINANCE OF JASPER COUNTY COUNCIL
TO AMEND JASPER COUNTY ORDINANCE O-2022-17 FOR FISCAL
YEAR 202 3 JASPER COUNTY BUDGET TO PROVIDE FOR
AMENDMENTS TO THE BUDGET AND TO CARRYOVER APPROVED
LAPSING FUNDS TO FISCAL YEAR 202 4, AND TO AMEND JASPER
COUNTY ORDINANCE O -2023-09 FOR FISCAL YEAR 202 4 JASPER
COUNTY BUDGET TO PROVIDE FOR AMENDMENTS TO THE
BUDGET RESULTING FROM THE CARRYOVER OF APPROVED
LAPSING FUNDS FROM FISCAL YEAR 202 3 AND TO CORRECT AN
ERROR IN SECTION 2 OF THE BUDGET REGARDING A
MATHEMATICAL ERROR.
WHEREAS, Jasper County Council approved Ordinance O-2022-17 Fiscal Year
2022-2023 Operating and Capital Budget on June 6, 2022, and
WHEREAS, Jasper County Council approved Ordinance O-2023-09 Fiscal Year
2023 – 2024 Operating and Capital Budget on June 20 2023, and
WHEREAS, Ordinance O-2022-17 provides for Lapsing of Funds and
Continuing of Appropriations for Subsequent Year, and
WHEREAS, Ordinance O-2022-17 provides that specific items budgeted in the
2022 - 2023 fiscal year for which unforeseen circumstances prevented the funds
from being spent during the current year may be a carryover appropriation into
the next succeeding fiscal year with the approval of the County Administrator and
County Council, and
WHEREAS, Council may approve transfers of funds throughout the fiscal year,
and
WHEREAS, those transfers must be recognized and ratified as authorized by
Section 7 of Ordinance 2022-17.; and
WHEREAS, the adopted budget in Section 2 regarding the Appropriation for
the Jasper County School District inadvertently included a calculated School
Debt Revenue and Appropriation based upon the use of an incorrect value of the
mill to be used, which does not increase the millage rate;
NOW THEREFORE, BE IT ORDAINED that the following budget
amendments and carry over appropriations set forth in Section 1 below be made
to the FY 2022-2023 and FY 2023-2024 Jasper County Operating and Capital
Budget, and the corrections to the Jasper County School District set forth in
Section 2 below be made in the following manner:
2
Section 1. Budget Amendment regarding Carry Over Appropriations and Lapsing
Funds. The following adjustments are made to the 2022-2023 Fiscal Year Budget
and the listed budget items are added to the 2023-2024 Fiscal Year Budget.
Section 2. Amendment to the Current FY 2023-2024 Budget
That revenue and appropriations for the Jasper County School District Debt
Fund for the Fiscal Year beginning July 1, 2023, and ending June 30, 2024, for the
school district of the County of Jasper, South Carolina be amended for said term to
$5,611,600 for the purposes stated herein, and Section 2 of the 2023-2024 Budget
be amended to read:
SECTION 2. Appropriation for Jasper County School District
Capital and General Operations Budget. There is hereby appropriated to
the School Operations Budget the remaining non -appropriated funds
collected through School District ad valorem taxation in Fiscal Year 2022-
2023, which were in excess of School District funds appropriated by the FY
2022- 2023 budget ordinance . There is further hereby appropriated from
revenues to be collected from the stated sources the following sums for the
Jasper County School District Capital and Operational n eeds and for the
purposes set forth for fiscal year 2023 – 2024:
Jasper County
FY23 and FY24 Budget Amendment and Lapsing Funds Ordinance
Public Hearing and Third Reading
Monday, September 18, 2023
Account Explanation
Budget as
Adopted or
Amended
Budget AmendmentAmended Budget
Budget as
Adopted or
Amended
Budget AmendmentAmended Budget
Total Budgeted Revenue Adopted/Amended 48,138,559.00 - 51,666,677.00
Adjustments in Proposed Ordinance
ARPA Fund Revenue -$ 255,993.95$ 255,993.95$ ARPA Fund Expenditure Per Resolution #R-2023-11
Cash Carry Forward 7,214,818.00$ (2,860,691.70)$ 4,354,126.30$ 7,027,158.00$ 4,270,368.39$ 11,297,526.39$ Amounts Carried Forward From FY23
Amended Revenue Total (2,604,697.75)$ 4,610,120.25$ 4,270,368.39$ 11,297,526.39$
TOTAL ADOPTED/AMENDED BUDGETED REVENUE 48,138,559.00$ 51,666,677.00$
Net Budgeted Revemue Amendment (2,604,697.75)$ 4,270,368.39$
Amended Budget Revenue 45,533,861.25$ -$ 55,937,045.39$ -$
Total Budgeted Expenditures Adopted/Amended 48,138,559.00 51,666,677.00
Capital Carry-Forward
New Vehicles 046-2307 1,514,664.00$ (709,332.23)$ 805,331.77$ 925,000.00$ 709,332.23$ 1,634,332.23$ Supply chain issues impacted availibilty and delivery
Equipment 046-2430 150,000.00$ (78,048.70)$ 71,951.30$ 150,000.00$ 78,048.70$ 228,048.70$ Supply chain issues impacted availibilty and delivery
Capital Outlay 046-3752 566,606.00$ (566,606.00)$ -$ -$ 566,606.00$ 566,606.00$ Requests for Proposals for Type 1 Pumper/Engine was postponed until FY24
Building Repairs 046-5095 200,000.00$ (87,249.45)$ 112,750.55$ 200,000.00$ 87,249.45$ 287,249.45$ Expenditures were postponed until FY24
Equipment 048-2430 130,000.00$ (130,000.00)$ -$ 130,000.00$ 130,000.00$ 260,000.00$ Supply chain issues impacted availibilty and delivery
Capital Outlay 048-3752 550,812.00$ (543,369.31)$ 7,442.69$ 200,000.00$ 543,369.31$ 743,369.31$ Expenditures were postponed until FY24
Building Repairs 048-5095 225,000.00$ (222,505.71)$ 2,494.29$ 50,000.00$ 222,505.71$ 272,505.71$ Expenditures were postponed until FY24
Equipment 056-2430 150,000.00$ (99,466.44)$ 50,533.56$ 150,000.00$ 99,466.44$ 249,466.44$ Expenditures were postponed due to inability to obtain new vehicles
New Vehicles 057-2307 568,700.00$ (170,895.87)$ 397,804.13$ -$ 170,895.87$ 170,895.87$ Supply chain issues impacted availibilty and delivery
Equipment 058-2430 60,000.00$ (46,705.39)$ 13,294.61$ 210,600.00$ 46,705.39$ 257,305.39$ Supply chain issues impacted availibilty and delivery
Grant Matching Funds 095-2615 380,000.00$ (368,139.07)$ 11,860.93$ 500,000.00$ 368,139.07$ 868,139.07$ Project was delayed until additional funding could be obtained
Capital Outlay 095-3752 550,000.00$ (514,717.95)$ 35,282.05$ 550,000.00$ 514,717.95$ 1,064,717.95$ Planned capital projects postponed until FY24
Capital Outlay 074-3752 800,000.00$ (570,901.22)$ 229,098.78$ -$ 570,901.22$ 570,901.22$ Carryover of Farmers' Market Project
Budget Amendments
Planning Expenses 060-5000 147,615.00$ (146,977.58)$ 637.42$ 146,977.58$ 146,977.58$ 293,955.16$ Council approved study was approved near the end of FY23 and will begin in FY24
Computer Equipment 065-2460 1,500.00$ (1,500.00)$ -$ 1,500.00$ 1,500.00$ 3,000.00$ Unspent funds from prior FY23 carried over to allow for necessary expenditures in new FY
Telephone 066-2100 3,600.00$ (1,858.37)$ 1,741.63$ -$ Unspent funds from prior FY23 carried over to allow for necessary expenditures in new FY
Supplies and Forms 066-2240 1,000.00$ (1,000.00)$ -$ 1,000.00$ 1,000.00$ 2,000.00$ Unspent funds from prior FY23 carried over to allow for necessary expenditures in new FY
Office Equipment 066-2440 2,000.00$ (1,833.24)$ 166.76$ 2,000.00$ 3,691.61$ 5,691.61$ Unspent funds from prior FY23 carried over to allow for necessary expenditures in new FY
Office Supplies 067-2200 4,000.00$ (2,569.44)$ 1,430.56$ 4,000.00$ 2,569.44$ 6,569.44$ Unspent funds from prior FY23 carried over to allow for necessary expenditures in new FY
Office Equipment 067-2440 1,500.00$ (1,500.00)$ -$ 1,500.00$ 1,500.00$ 3,000.00$ Unspent funds from prior FY23 carried over to allow for necessary expenditures in new FY
Computer Equipment 067-2460 2,000.00$ (1,159.76)$ 840.24$ 2,000.00$ 1,159.76$ 3,159.76$ Unspent funds from prior FY23 carried over to allow for necessary expenditures in new FY
Office Equipment 072-2440 5,000.00$ (4,032.66)$ 967.34$ 10,000.00$ 4,032.66$ 14,032.66$ Unspent funds from prior FY23 carried over to allow for necessary expenditures in new FY
Budget Amendments Previously Approved
ARPA Expenditures 062-3754 -$ 255,993.95$ 255,993.95$ Council approved with resolution #R-2023-11
Dispatch Equipment 048-2450 -$ 304,838.69$ 304,838.69$ Council approved with ordinance #0-2023-04
Computer Equipment 049-2460 25,000.00$ 304,838.00$ 329,838.00$ Council approved with ordinance #0-2023-04
Capital Outlay (Farmers' Market) 074-3752 -$ 800,000.00$ 800,000.00$ Council approved with ordinance #O-2022-31
6,038,997.00$ (2,604,697.75)$ 3,434,299.25$ 3,234,577.58$ 4,270,368.39$ 7,504,945.97$
TOTAL ADOPTED/AMENDED BUDGETED EXPENDITURES 48,138,559.00$ 51,666,677.00$
Net Budgeted Expenditures Amendment (2,604,697.75)$ 4,270,368.39$
Amended Budget Expenditures 45,533,861.25$ 55,937,045.39$
Fiscal Year 2023 Budget Fiscal Year 2024 Budget
Fiscal Year 2023 Budget Amendments Fiscal Year 2024 Budget Amendments
3
JASPER COUNTY SCHOOL DISTRICT
CAPITAL AND GENERAL OPERATIONS BUDGET
FISCAL YEAR 2023-2024
REVENUES APPROPRIATIONS
School Property School District
Operations Tax Levy $ 24,022,738 Operations Tax Levy $ 24,022,738
School Debt $ 5,611,600 School Debt $ 5,611,600
School Grand Total $ 29,634,338 School Grand Total $ 29,634,338
Section 3. Provisions of ordinances previously adopted by County Council,
which are not consistent with this Ordinance 0-2023-____ are deemed
superseded.
Section 4. If any section, clause, paragraph, sentence or phrase of this
ordinance, or application thereof any person or circumstances must, for any
reason be held to be invalid or unconstitutional. The invalid section, clause
paragraph, sentence, phrase or application shall no way affect the remainder of
this ordinance: and is hereby declared to be the intention of the County Council
that the remainder of this ordinance would have passed notwithstanding the
invalidity or unconstitutionality of any section, clause paragraph, sentence or
phrase thereof.
Section 5. This ordinance must take effect upon approval by Council.
Jasper County Council
BY: _________________________
L. Martin Sauls IV, Chairman
_________________________
Barbara B. Clark, Vice Chairman
__________________________
Alvin Adkins, Councilman
__________________________
John Kemp, Councilman
__________________________
Coy Garbade Councilman
4
ATTEST:
_________________________
Wanda Simmons,
Clerk to Council
First Reading: 8/21/2023
Second Reading: 9/5/2023
Public Hearings: 9/18/2023
Adopted: 9/18/2023
Reviewed for form and draftsmanship by the Jasper County Attorney.
__________________________ _______________
David Tedder Date
STATE OF SOUTH CAROLINA
JASPER COUNTY
ORDINANCE #2023 -____
AN ORDINANCE OF
JASPER COUNTY COUNCIL
Clarifying that the provisions of Ordinance O -2023-06,
providing that certain property subject to the Development
Agreement entered into by the County and Conduit Street
Partners, LLC (CSP) must be conveyed by the property’s
current owner to the developer thereof , includes the
developer’s successors and assigns by recognizing and
acknowledging the acquisition may be by an affiliate of
CSP, to provide for the approval of an Exhibit inadvertently
omitted, and matters related thereto.
WHEREAS, on June 27, 2022, the Jasper County Council passed Ordinance O -2022-
14, recorded in Book 1107, Page 1678 of the Jasper County Register of Deeds , which
ordinance approved the County’s entry into and execution of the development agreement
(the “ Development Agreement ”) that had been negotiated between the County and
Conduit Street Partners, LLC, the “Developer”).
WHEREAS, Ordinance O -2022-14 further contained a provision (in Paragraph 2
thereof) that instituted a deadline of June 30, 2023, by which the “Owner/Developer”
(defined therein as CSP) must acquire legal title to the Property (the “ Acquisition
Deadline”); otherwise, the Development Agreement would automatically be null and void.
The phrase imposing the Acquisition Deadline read as follows:
““[I]t is specifically recited that the provisions of the Development Agreement are
expressly intended for the benefit of the Owner/Developer Conduit Street
Partners. To the extent the Property is not conveyed to the Owner/Developer by
the current legal owner by June 30, 2023, then the Development Agreement shall
be void, regardless of any execution by the Council Chairman and delivery by the
County Administrator on behalf of the County.” (emphasis added)
WHEREAS, subsequently by Ordinance 0 -2023-06, the acquisition deadline was
amended to read “To the extent the Property is not conveyed to the Developer by the
current legal owner by December 31, 2023, then the Development Agreement shall be
void, regardless of any execution by the Council Chairman and delivery by the County
2
Sept 11, 2023
Administrator on behalf of the County .” (emphasis added) to address permitting delays
with outside agencies; and
WHEREAS, the Developer has provided correspondence from the Army Corps of
Engineers dated August 18, 2023, which states that the permit review has been
transferred to another District in New Mexico because of workload constraints, likely
resulting in further delays in receiving Corps permits in addition to delays and extended
reviewing times of other controlling jurisdictional authorities and agencies whose
approvals are required to obtain the Developer’s development permits; and
WHEREAS, Ordinance O-2023- 06 defines the Developer “as Conduit Street Partners,
LLC”; and
WHEREAS, the Development Agreement defines the Developer as meaning “the Owner,
along with any and all successors in title, assigns or lessees of the Owner who are
transferred in writing from the Owner all or a portion of the Development Rights under
this Agreement and undertake Development of any portion of the Property, as
applicable in the context where such term is used.” and
WHEREAS, the Development Agreement further defines the “Owner” as “Conduit
Street Partners, LLC, a Maryland limited liability company, its corporate successors
and any assignee, whereby such interest is assigned in writing to it by Owner. Owner
has a present equitable interest in the Property by virtue of a contract to purchase with
Current Legal Owner”.
WHEREAS, as the terms of the Ordinance do not explicitly recognize that Conduit Street
Partners, LLC, defined as “Owner/Developer” in the Development Agreement, includes
the successors and assigns (including affiliated entities); and
WHEREAS, in order to make such a clarification, it is not necessary to amend the
Development Agreement, since the Development Agreement already defines the
“Developer” and “Owner” as including the successors and assigns of Conduit Street
Partners, LLC (which would include affiliated entities); and
WHEREAS, after giving the matter consideration, the Jasper County Council has
determined that it would be appropriate to pass an ordinance amending Ordinance 2023-
06 to explicitly recognize and provide that the property must be conveyed to the
Owner/Developer as defined in the Development Agreement , and further extending the
Acquisition Deadline to accommodate permitting matters with outside agencies; and
3
Sept 11, 2023
WHEREAS, it has come to the County’s attention that an Exhibit to the Development
Agreement (Exhibit E) , which provided the form of the Assignment to be used when
property was transferred to others was inadvertently omitted from the document and is
not filed with the recorded Development Agreement , and that further, there was
mislabeling of Exhibits by the mention of two separate exhibits (E and F);
NOW, THEREFORE, BE IT ORDAINED , by the Jasper County Council , duly
assembled and with authority of same, that the above premises be incorporated by
reference; and:
1. The last sentence of Paragraph 2 of Ordinance O -2023- 06 is hereby amended to
read as set forth immediately below.
2. “To the extent the Property is not conveyed by the current legal owner to the
Developer, as Developer and Owner are defined in the Development Agreement
recorded at in the office of the Jasper County Register of Deeds in Book 1107 at
Pages 1678 - 1718, by the later of December 31, 2023 , or ninety (90) days
after receipt of all final outside agency land use and development
permit approvals, including, but not limited to the Army Corps of
Engineers permits, then the Development Agreement shall be void, regardless
of any execution by the Council Chairman and delivery by the County
Administrator on behalf of the County.
3. The extension of the Acquisition Deadline effected by this Ordinance shall not
require any amendment or modification of the Development Agreement between
the Developer and Jasper County. Accordingly, the terms of such Development
Agreement shall remain in effect, subject to the new Acquisition Deadline set forth
above.
4. The Form of Assignment attached hereto (Exhibit E is a complete Assignment,
Exhibit E -1 is a partial Assignment) to be used when transferring rights and
obligation under the Development Agreement are approved by County Council ,
with leave for the County Administrator, upon advice from the County Attorney, to
make such non-substantial modifications as may be desirable to best accomplish
the identification of, and responsibilities and obligations being transferred.
5. If any section, clause, paragraph, sentence or phrase of this ordinance, or
application thereof any person or circumstances shall for any reason be held to be
invalid or unconstitutional., the invalid section, clause paragraph, sentence, phrase
or application shall no way affect the remainder of this ordinance: and it is hereby
declared to be the intention of the County Council that the remainder of this
4
Sept 11, 2023
ordinance would have passed notwithstanding the invalidity or unconstitutionality
of any section, clause paragraph, sentence or phrase thereof.
6. This ordinance shall take effect upon approval by Council.
Martin L. Sauls, IV
Chairman
ATTEST:
Wanda Simmons
Clerk to Council
ORDINANCE: # 2023-__
First Reading: September 18, 2023
Public Hearing: October 2, 2023
Second Reading:
Third Reading:
Adopted:
_____________________________________________
Reviewed for form and draftsmanship by the Jasper County Attorney.
__________________________ _______________
David Tedder Date
5
Sept 11, 2023
FIRST EXHIBIT TO ORDINANCE
EXHIBIT E
for Development Agreement
Complete Assignment of Property
EXHIBIT E
TRANSFER AND ASSIGNMENT OF DEVELOPMENT RIGHTS AGREEMENT
STATE OF SOUTH CAROLINA ) ASSIGNMENT AND ASSUMPTION
) OF RIGHTS AND OBLIGATIONS
COUNTY OF JASPER ) UNDER DEVELOPMENT AGREEMENT
THIS ASSIGNMENT AND ASSUMPTION OF RIGHTS AND OBLIGATIONS UNDER
DEVELOPMENT AGREEMENT (this “Assignment and Assumption”) is dated this ______ day
of ______, 202_, by and among CONDUIT STREET PARTNERS , LLC, a Maryland limited
liability company (“ Assignor”), ______________________, a ___________________________
(“Assignee”), and JASPER COUNTY, SOUTH CAROLINA (“Jasper County”).
WHEREAS, on or about August 6, 2022, Assignor entered into a Development Agreement
(the “ Development Agreement ”) with Jasper County, incident to development of certain real
property located in the unincorporated area of Jasper County, consisting of approximately 38.84
acres (the “ Property”), as more particularly described in the Development Agreement recorded
August 10, 2022, in the Office of the Register of Deeds for Jasper County, South Carolina in Book
1107 at Page 1678, and which Property is described on Exhibit A attached thereto; and,
WHEREAS, at the time that the Development Agreement was executed by Assignor and
Jasper County and recorded, PAUL H. ANDERSON, EMILY A. TILLMAN and JOHN F.
ANDERSON (collectively, “ Sellers” or the “ Current Legal Owners ”) were the current legal
owners of the Property, Assignor was the contract purchaser of all the Property pursuant to an
Agreement of Purchase and Sale (the “Real Estate Contract”) between the Current Legal Owners,
as sellers, and Assignor, as purchaser, and Assignor proposed to develop, or cause to be developed
therein, residential and community amenity uses and related site infrastructure improvements, as
further described in the Development Agreement; and,
WHEREAS, on __________, 202___, Assignor and Assignee entered into an Agreement
to Assign Agreement of Purchase and Sale (the “ Agreement”) providing for the assignment by
Assignor to Assignee of all of Assignor’s right to (x) purchase all the Property from the Current
Legal Owners pursuant to the Real Estate Contract and (y) develop all the Property; and,
WHERERAS, on _______________, 202_____, and pursuant to the Agreement, Assignor
assigned to Assignee all of Assignor’s right to (x) purchase all the Property from the Current Legal
Owners pursuant to the Real Estate Contract and (y) develop all the Property; and,
6
Sept 11, 2023
WHEREAS, on _______________, 202_____, Assignee, as assignee of Assignor as
purchaser under the Real Estate Contract, purchased and acquired all of the Property from the
Current Legal Owners and now proposes to develop, or cause to be developed therein, residential
and community amenity uses and related site infrastructure improvements, as further described in
the Development Agreement; and,
WHEREAS, it is the desire and intention of Assignor to assign to Assignee, and it is the
desire and intention of Assignee to assume, all of Assignor’s rights, title, interests, privileges and
obligations in, to and under the terms of the Development Agreem ent, thus necessitating the
preparation and execution of the within Assignment and Assumption.
NOW, THEREFORE, for good and valuable consideration, the receipt and adequacy
whereof being herewith acknowledged, the parties hereby agree as follows, to wit:
1. Assignment and Assumption of Rights . Assignor does hereby transfer, assign,
convey and deliver unto Assignee, its successors and assigns, all of Assignor’s rights, title,
interests, privileges and obligations in, to and under the Development Agreement and the CSP
PDD Standards (the “PDD Standards”), including, but not limited to, all of Assignor’s rights, title,
interests and privileges in and under the Development Agreement to develop and construct up to
Two Hundred Seventy -five (275) residential dwelling units on the Property. Assignee h ereby
assumes and agrees to perform all of Assignor’s rights, privileges and obligations as described in
the Development Agreement. Assignee acknowledges receipt of the Development Agreement and
all Exhibits thereto and agrees to be bound by the terms the reof and to develop the Property in
accordance with such terms. The rights, privileges and obligations hereby assigned and assumed
shall be covenants running with the land, binding upon the parties hereto and their successors and
assigns.
2. Transfer of Obligation to Pay Development Fees . The obligation of the Owner
(as defined in the Development Agreement) to comply with the terms of Article XI of the
Development Agreement, concerning the payment of the Development Fees and administrative
charges, as such relate to the Property, is hereby included in Assignor’s assignment and Assignee’s
assumption herein. Assignee hereby assumes the Owner’s obligations to pay the Development
Fees and administrative charges related to the Property, as said obligations are set forth in Article
XI of the Development Agreement.
3. Enumeration of Assigned and Assumed Rights and Obligations. For purposes
of illustration only, and not as a limitation on the assignment and assumption effectuated by
Paragraph 1 above, Assignor hereby assigns and Assignee hereby assumes and agrees to perform
and be bound by the following:
1.1 Assignor does hereby assign and transfer to Assignee all of Assignor’s
rights, title and interest in, to and under the Development Agreement, including, but not limited
to, all of Assignor’s rights, title, interests and privileges in and under the Development Agreement
to develop and construct up to Two Hundred Seventy -five (275) residential dwelling units on the
Property (the “Development Rights”); and
7
Sept 11, 2023
1.2 Assignee assumes the obligation to pay any Development Fees and
administrative charges identified in Article XI of the Development Agreement as they relate to the
Property, as set forth in Paragraph 2 above.
4. Default and Enforcement of Provisions . As provided in Article XV of the
Development Agreement and as herein provided, upon the failure of Assignor or Assignee to
comply with the terms of the Development Agreement and this Assignment and Assumption
incident to the Property, the non -defaulting party may pursue any and all legal or equitable
remedies, including specific performance, against the defaulting party.
5. Indemnification. Assignee agrees to indemnify, defend and hold harmless
Assignor, its agents, principals, successors and assigns, and their affiliates from and against all
losses, costs, damages or other matters (including reasonable attorney fees) arising out of any
breach by Assignee of the Development Agreement from and after the date of this Assignment and
Assumption. Assignor agrees to indemnify, defend and hold harmless Assignee, its agents,
principals, successors and assigns, and their affiliates from and against all losses, costs, damages
or other matters (including reasonable attorney fees) arising out of any breach by Assignor of the
Development Agreement prior to the date of this Assignment and Assumption.
6. Notices. Any notice, demand, request, consent, approval or communication among
any of the parties hereto shall be in writing and shall be delivered or addressed as provided under
Section XVII of the Development Agreement and shall be addressed as follows:
As to Assignee:
As to Assignor:
Conduit Street Partners, LLC
59 Franklin Street
Annapolis, MD 21401
Attn: Peter Zadoretzky
E-mail: pzadoretzky@oapartners.com
8
Sept 11, 2023
With a required copy to:
Bouhan Falligant LLP
One West Park Avenue
Savannah, GA 31401
Attn: John D. Northup III, Esq.
E-mail: jdnorthup@bouhan.com
As to Jasper County:
County Administrator, Jasper County
358 Third Avenue
Courthouse Square
Post Office Box 1149
Ridgeland, South Carolina 29936
Attn: Andrew P. Fulghum
Email: afulghum@jaspercountysc.gov
With a required copy to:
County Attorney, Jasper County
358 Third Avenue
Courthouse Square
Post Office Box 1149
Ridgeland, South Carolina 29936
Attn: David L. Tedder, Esq.
Email: dtedder@jaspercountysc.gov
Binding Effect. This Assignment and Assumption shall inure to the benefit of and be
binding upon the respective parties hereto, their successors and assigns.
Governing Law . The within Assignment and Assumption shall be interpreted and
construed and conform to the laws of the State of South Carolina.
Reaffirmation of Terms. All other terms, conditions, rights and privileges contained in
the Development Agreement not specifically referenced herein shall remain in full force and effect
and binding upon the parties hereto and their successors and assigns.
Acknowledgment by Jasper County . By its signature below, Jasper County hereby
acknowledges the assignment of development rights and obligations as set forth herein. Any
further assignments by the Assignee must be provided to Jasper County, consistent with the terms
of the Development Agreement.
[Signatures Contained on Following Pages]
9
IN WITNESS WHEREOF , the parties have caused this Assignment and
Assumption to be duly executed as of the date set forth above.
Assignor:
CONDUIT STREET PARTNERS, LLC,
a Maryland limited liability company
Signed, sealed and delivered
in the presence of:
By:
Name:
Witness Its:
STATE OF SOUTH CAROLINA )
) ACKNOWLEDGMENT
COUNTY OF _________________ )
I, the undersigned Notary Public for South Carolina, do hereby certify that
________________________, as _______________________ of CONDUIT STREET
PARTNERS, LLC, a Maryland limited liability company, on behalf of said company,
known to me (or satisfactorily proven) to be the person whose name is subscribed to the
within document, as the appropriate officer/member/manager of said company, who
acknowledged the due execution of the foregoing instrument.
Witness my hand and seal this _____ day of _________________, 202___.
Notary Public for South Carolina
My commission expires:
10
Assignee:
___________________________________,
a __________________________________
Signed, sealed and delivered
in the presence of:
By:
Name:
Witness Its:
STATE OF SOUTH CAROLINA )
) ACKNOWLEDGMENT
COUNTY OF _________________ )
I, the undersigned Notary Public for South Carolina, do hereby certify that
________________________, as _______________________ of
__________________________, a ______________________, on behalf of said
[corporation][company], known to me (or satisfactori ly proven) to be the person whose
name is subscribed to the within document, as the appropriate officer/member/manager
of said [corporation][company], who acknowledged the due execution of the foregoing
instrument.
Witness my hand and seal this _____ day of _________________, 202___.
Notary Public for South Carolina
My commission expires:
11
SECOND EXHIBIT TO ORDINANCE
EXHIBIT E -1
for Development Agreement
Partial Assignment of Property
12
STATE OF SOUTH CAROLINA ) PARTIAL ASSIGNMENT AND
) ASSUMPTION OF RIGHTS AND
) OBLIGATIONS UNDER
COUNTY OF JASPER ) DEVELOPMENTAGREEMENT
THIS PARTIAL ASSIGNMENT AND ASSUMPTION OF RIGHTS AND
OBLIGATIONS UNDER DEVELOPMENT AGREEMENT (“Partial Assignment and
Assumption”) is dated this ______ day of ______, 202_, by and among CONDUIT
STREET PARTNERS , LLC , a Maryland limited liability company (“ Assignor”),
______________________, a ___________________________ (“ Assignee”), and
JASPER COUNTY, SOUTH CAROLINA (“Jasper County”).
WHEREAS, on or about August 6, 2022, Assignor entered into a Development
Agreement (the “Development Agreement”) with Jasper County, incident to development
of certain real property located in the unincorporated area of Jasper County, consisting of
approximately 38.84 acres (the “Property”), as more particularly described in the
Development Agreement recorded August 10, 2022, in the Office of the Register of Deeds
for Jasper County, South Carolina in Book 1107 at Page 1678, and which Property is
described on Exhibit “A” attached thereto; and,
WHEREAS, on __________, 20 2____, Assignor and Assignee entered into an
Agreement of Sale (“Agreement”) providing for the sale by Assignor to Assignee of
___________ acres (“Transferred Property”) as described on Exhibit “A” attached hereto;
and,
WHEREAS, the remaining balance of the original Property made subject to the
Development Agreement, and not previously transferred to others, containing
approximately _________ acres, and all development rights and obligations specifically
associated therewith, is hereby presently retained by the Assignor (“Retained Property”) as
described in Exhibit “B” attached hereto; and,
WHEREAS, as an integral part of the conveyance of a portion of the original
Property by Assignor to Assignee, it is the desire and intention of Assignor to assign to
Assignee, and it is the desire and intention of Assignee to assume certain rights, privileges
and obligations under the terms of the Development Agreement applicable to the
Transferred Property, thus necessitating the preparation and execution of the within Partial
Assignment and Assumption.
NOW, THEREFORE, for good and valuable consideration, the receipt and
adequacy whereof is herewith acknowledged, the parties hereby agree as follows, to wit:
2. Partial Assignment and Assumption of Rights . Assignor does hereby
transfer, assign, convey and deliver unto Assignee, its successors and assigns, all of
Assignor’s rights, privileges and obligations as described in the Development Agreement
and the Malphrus Tract PDD Standards (“PDD Standards”) to develop up to _________ _
13
Dwelling Units applicable to the Transferred Property, together with up to __________
acres of Commercial development rights and commercial square footage of the types
described below, except for those certain excluded obligations, rights and privileges
(“Excluded Obligations”) identified below. Assignee hereby assumes and agrees to
perform all of Assignor’s rights, privileges and obligations as described in the
Development Agreement, applicable to the Transferred Property, except for the Excluded
Obligations. Assignee acknowledges receipt of the Development Agreement and all
Exhibits thereto and agrees to be bound by the terms thereof and to develop the Transferred
Property in accordance with such terms. The rights and obligations hereby assigned and
assumed shall be covenants running with the land, binding upon the parties hereto and their
successors and assigns.
3. Excluded Obligations . The obligation of the Owner or a Subsequent
Developer, as applicable, to comply with the terms of Article XI of the Development
Agreement, concerning the payment of a prorated amount of the Development Fees and
administrative charges, as such relate to the Retained Property, only is hereby excluded
from Assignor’s assignment and Assignee’s assumption herein; provided, however,
Assignee assumes the obligations to pay a prorated amount of the Development Fees and
administrative charges related to the Transferred Property and the transfer of it by Assignor
to Assignee, as said obligations are set forth in Article XI of the Development Agreement.
4. Enumeration of Assigned and Assumed Rights and Obligations . For
purposes of illustration only, and not as a limitation on the assignment and assumption
effectuated by Paragraph 1 above, Assignor hereby assigns and Assignee hereby assumes
and agrees to perform and be bound by the following:
4.1 Assignor shall assign and does hereby transfer to Assignee all of
Assignor’s rights, title and interest to develop up to _________ Dwelling Units and up to
_______ acres of Commercial development and _________ square feet of
___________(type of commercial development) (“Development Rights”); and
4.2 Assignee assumes the obligation to pay any Development Fees and
administrative charges identified in Article XI as they relate to the Transferred Property,
as set forth in Paragraph 2 above; and
5. Default and Enforcement of Provisions . As provided in Section XV of
the Development Agreement and as herein provided, upon the failure of Assignor or
Assignee to comply with the terms of the Development Agreement and this Partial
Assignment and Assumption incident to the Property, the non-defaulting party may pursue
any an d all legal or equitable remedies, including specific performance, against the
defaulting party.
6. Indemnification. Assignee agrees to indemnify, defend and hold harmless
Assignor, its agents, principals, successors and assigns, and their affiliates from and against
all losses, costs, damages or other matters arising out of any breach by Assignee of the
Development Agreement.
14
7. Notices. Any notice, demand, request, consent, approval or communication
among any of the parties hereto shall be in writing and shall be delivered or addressed as
provided under Section XVII of the Development Agreement and shall be addressed as
follows:
As to Assignee:
___________________________
___________________________
___________________________
With a required copy to:
__________________________
__________________________
__________________________
To Assignor:
Conduit Street Partners, LLC
59 Franklin Street
Annapolis, MD 21401
Attn: Peter Zadoretzky
E-mail: pzadoretzky@oapartners.com
With a required copy to:
Bouhan Falligant LLP
One West Park Avenue
Savannah, GA 31401
Attn: John D. Northup III, Esq.
E-mail: jdnorthup@bouhan.com
8. Binding Effect. This Partial Assignment and Assumption shall inure to the
benefit of and be binding upon the respective parties hereto, their successors and assigns.
9. Governing Law. The within Partial Assignment and Assumption shall be
interpreted and construed and conform to the laws of the State of South Carolina.
10. Reaffirmation of Terms. All other terms, conditions, rights and privileges
contained in the Development Agreement not specifically referenced herein shall remain
in full force and effect and binding upon the parties hereto and their successors and assigns.
11. Acknowledgment by Jasper County . By its signature below, Jasper
County hereby acknowledges the assignment of development rights and obligations as set
forth herein. Any further assignments by the Assignee must be provided to Jasper County,
consistent with the terms of the Development Agreement.
15
IN WITNESS WHEREOF, the parties have caused this Partial Assignment and
Assumption to be duly executed as of the date set forth above.
Signed, sealed and delivered
in the presence of:
ASSIGNEE:
By:
Witness
By:
Notary Name Printed:
Its:
STATE OF SOUTH CAROLINA )
) ACKNOWLEDGMENT
COUNTY OF _________________ )
I, the undersigned Notary Public for South Carolina, do hereby certify that
________________________, as _______________________ of
__________________________, on behalf of __________________________, known
to me (or satisfactorily proven) to be the person whose name is subscribed to the within
document, as the appropriate officer/member/manager of _______________________,
who acknowledged the due execution of the foregoing instrument.
Witness my hand and seal this _____ day of _________________, 202___.
Notary Public for South Carolina
My commission expires:
16
Signed, sealed and delivered
in the presence of:
ASSIGNOR:
CONDUIT STREET PARTNERS, LLC,
a Maryland limited liability company
Signed, sealed and delivered
in the presence of:
By:
Name:
Witness Its:
STATE OF SOUTH CAROLINA )
) ACKNOWLEDGMENT
COUNTY OF _________________ )
I, the undersigned Notary Public for South Carolina, do hereby certify that
________________________, as _______________________ of CONDUIT STREET
PARTNERS, LLC, a Maryland limited liability company, on behalf of said company,
known to me (or satisfactorily proven) to be the person whose name is subscribed to the
within document, as the appropriate officer/member/manager of said company, who
acknowledged the due execution of the foregoing instrument.
Witness my hand and seal this _____ day of _________________, 202___.
Notary Public for South Carolina
My commission expires:
17
Signed, sealed and delivered
in the presence of:
WITNESSES: JASPER COUNTY, SOUTH
CAROLINA
_______________________________ By:________________________________
___________, County Administrator
_______________________________
Attest:________________________________
___________, Clerk to Council
STATE OF SOUTH CAROLINA )
) ACKNOWLEDGMENT
COUNTY OF JASPER )
I HEREBY CERTIFY, that on this ____ day of ___________, 202__,
before me, the undersigned Notary Public of the State and County aforesaid, personally
appeared _________________________ and __________________, known to me (or
satisfactorily proven) to be the person whose name is subscribed to the wi thin document,
as the appropriate officials of Jasper County, South Carolina, who acknowledged the due
execution of the foregoing instrument.
Witness my hand and official seal this the ______ day of __________, 2023.
___________________________________
Notary Public for South Carolina
My Commission Expires: ____________
18
EXHIBIT A
DESCRIPTION OF TRANSFERRED PROPERTY
19
EXHIBIT B
DESCRIPTION OF RETAINED PROPERTY
Jasper County Emergency Services
1509 Grays Hwy (P.O.B. 1509)
Ridgeland, SC 29936
Office: 843-726-7607 Fax: 843-726-7966
Chief Russell W. Wells, Director Deputy Chief Darran Vaughn
14, September 2023
To: County Council
Re: Zoll Medical Contract
Greetings Council,
Please find in this package our request to authorize the administrator to execute a 10 year contract with Zoll medical.
This contract is a budgeted item. We modified the contract to expand deliverables to include Automatic External
Defibrillators (AEDs) for the following:
• 65 - Jasper County Sheriff’s Office (patrol vehicles, administration office, Criminal Investigation Office (CID))
• 5 - Courts (General sessions, magistrate, bond, probate)
• 2 - Administration Building (Receptionist/security, third floor)
• 1 - Public works/maintenance Office
• 6 – Convenience Centers (Solid waste sites)
• 8 – Parks and Recreation (6: Community Centers, 2 for their field operative vehicles)
• 1 – Airport terminal
• 1 - Board of Elections
• 1 – Coroner’s Office
• 2 – Board of Disabilities (Office, and their community service vehicle)
• 1 – Board of Elections
• 1 – Council on Aging Office
The balance of the AEDS will be replacing AEDs in service with Fire Rescue that are past service life. Additionally this
includes Autopulse for the unincorporated engines. The Autopulse is a device that does chest compressions freeing up
personnel to perform other interventions during sudden cardiac arrest (SCA). The transport ventilators are devices used
in the ambulances in conjunction with the Autopulse devices for the ventilation of patients endotracheally intubated
(SCA, or patients medically sedated, rapid sequence intubation, etc)
Again this is a budget item and we are requesting the authority be granted to the administrator for execution.
Sincerely,
Chief Russell W. Wells
Quote No: Q-61905 Version: 2
Page 1 of 2
ZOLL Medical Corporation
269 Mill Road
Chelmsford, MA 01824-4105
Federal ID# 04-2711626
Phone: (800) 348-9011
Fax: (978) 421-0015
Email: esales@zoll.com
Jasper County Fire & Rescue
1509 Grays Hwy
Ridgeland, SC 29936
Chad Recchia
8434739166
crecchia@jaspercountysc.gov
Issued Date: August 11, 2023
Expiration Date: September 30, 2023
Prepared by: Christopher Judkins
Vent Territory Manager
christopher.judkins@zoll.com
ZOLL Medical is pleased to offer Jasper County Fire & Rescue the following special ZOLL ONE Program for the devices, accessories,
software, and warranty options included in the table listed at the end of this quote.
ZOLL One Program Summary
Structure ZOLL One
Down Payment Amount $0.00
Payment Term 10 Years
Payment Mode Annually
Payment Amount $180,557.68
1. Delivery will be made upon availability.
2. This Quote expires on September 30, 2023. Pricing is subject to change after this
date.
3. Pending credit and financial approval. First payment is due Net 30 Days from date of
shipment.
4. Payment amount does not include applicable taxes.
5. A signed Master Lease Agreement is required in order to execute this program.
Jasper County Fire & Rescue
Quote No: Q-61905 Version: 2
Page 2 of 2
ZOLL Medical Corporation
269 Mill Road
Chelmsford, MA 01824-4105
Federal ID# 04-2711626
Phone: (800) 348-9011
Fax: (978) 421-0015
Email: esales@zoll.com
The following items represent the devices, accessories, software, and warranty options included in the lease summary on
page one.
Item Part Number Description Quantity
1 8660-001401-01 Z Vent® Portable Ventilator 12
2 703-0731-27 Ventilator Carrier (White), Eagle II 12
3 8000-001468-03 ZOLL Ventilator Rescue Backpack, G3 Quicklook Blue 12
4 8778-890044-WF-V Vent - Worry-Free Service Plan - 4 Years On-Site At Time of Sale 12
5 8700-001003-01 AutoPulse NXT Starter Kit - EMS 9
6 8778-890044-WF-AP AutoPulse Worry - Free Service Plan 4 Year On-Site 9
7 G5A-80C-S Powerheart® G5 AED, Fully Auto with ICPR, Dual Language 110
8 8000-0855 Standard Metal Wall Cabinet 20
ZOLL ONE PROGRAM
1
Revised 03-15-2022
MASTER LEASE AGREEMENT
This Master Lease Agreement (together with all annexes, certificates, documents, exhibits, and schedules attached here to and hereby made a
part hereof, this “Master Agreement” or “Lease”) is entered into by and between ZOLL Medical Corporation, a Massachusetts corporation
(“Lessor”), and [INSERT LEGAL ENTITY NAME] (“Lessee”).
1. MASTER AGREEMENT; SCHEDULES. This Master Agreement sets forth the general terms and conditions upon which Lessor shall
rent to Lessee and Lessee shall rent from Lessor the equipment (“Equipment”) set forth on a schedule in the form of Schedule A1 (each, a
“Schedule”). Each Schedule, when executed by Lessee and Lessor, will constitute a separate Lease.
2. INITIAL TERM AND TERM. The initial term of each Lease stated in and evidenced by a Schedule executed pursuant to this Section
2 (“Initial Term”) will begin on the delivery date (“Delivery Date”) of the Equipment subject to that Lease and will continue for the period
described in the applicable Schedule.
3. RENT; LATE CHARGES. As rent for the Equipment under any “Rent”, Lessee agrees to pay the amounts specified in the applicable
Schedule on the due dates specified in the applicable Schedule of this Master Agreement. If any part of any Rent payment or other amount
due under this Master Agreement is not paid within five (5 ) days of its due date and if sufficient funds have been appropriated to make
such Rent payments or other amounts due. Lessee agrees to pay Lessor a charge for every month after the first month in which the amount
is late to compensate Lessor for the inability to reinvest the amount, which charge is stipulated and liquidated at 1.5% of the delayed amount
per month (or the lesser rate that is the maximum rate allowable under applicable law) in addition to the unpaid amount.
4. LEASES NON-CANCELABLE; NET LEASES; WAIVER OF DEFENSES TO PAYMENT. Lessee agrees that it has an absolute
and unconditional obligation to pay all rent and other amounts when due. Lessee is not entitled to abate, reduce or recoup rent or any other
amount due, or to set off any charge against any such amount for any reason whatsoever. Lessee hereby waives any recoupment, cross-
claim, counterclaim or any other defense at law or in equity to any rent payment or other amount due with respect to any lease, whether any
such defense arises out of this master agreement. There is no “test period” for the equipment.
5. EQUIPMENT RETURN REQUIREMENTS. Unless Lessee is purchasing the Equipment in accordance with the applicable Schedule,
Lessee shall return the Equipment in accordance with this Section and shall remain obligated to pay Rent until the Equipment is returned.
Not later than five (5 ) days after the last day of the aggregate term of a Lease, including the Initial Term, any Renewal Term (as defined
more fully in Schedule A1) and any optional or other automatic extension of the Initial Term or any Renewal Term (“Total Term”) of each
Lease (and any other time Lessee is required to return Equipment to Lessor under the terms of this Master Agreement or any Schedule ),
for all Equipment to be returned to Lessor, Lessee shall (a) remove any Lessee labels, tags or other identifying marks on the Equipment and
wipe clean or permanently delete all data contained on the Equipment, including, any data contained on internal or external drives , discs,
or accompanying media, (b) pack the Equipment in accordance with the manufacturer’s guidelines, and (c) deliver such Equipment to Lessor
at any destination within the continental United States designated by Lessor. All dismantling, packaging, transportation, in-transit insurance
and shipping charges shall be borne by Lessee. All Equipment shall be returned to Lessor in the same condition and working order as when
delivered to Lessee, reasonable wear and tear excepted. The return of the Equipment shall constitute a full release by Lessee of any leasehold
rights or possessory interest in the Equipment.
6. EQUIPMENT USE; MAINTENANCE AND ADDITIONS. Lessee shall, at all times during the applicable Total Term (a) operate and
maintain the Equipment furnished by Lessor to Lessee in order to secure Lessee’s obligations under any Schedule (“Collateral”) in good working
order, repair and condition, and in accordance with the manufacturer’s specifications and recommendations, all applicable laws and
regulations, and (b) purchase and use only accessories provided by Lessor for use with the Equipment. Worry- Free Service Plan is included
in the price, and illustrated on the associated quotation, over the Total Term of the ZOLL One Program as described in Exhibit B attached
hereto. In the event of any conflict between the terms and conditions contained in this Master Lease Agreement and the terms and conditions
contained in Exhibit B (Worry-Free Service Plan), the terms and conditions in Exhibit B (Worry-Free Service Plan) shall control. Lessee
shall make no alterations or additions to the Equipment or other Collateral, except those that will not result in the creation of any security
interest, lien or encumbrance on the Equipment or other Collateral or impair the value or use of the Equipment or other Collateral either at
the time made or at the end of the Total Term of the applicable Lease, and that are readily removable without damage to the Equipment or
other Collateral. Any such alterations or additions may void the Worry-Free Service Plan
Additionally, Lessor warrants to the Lessee that from the earlier of the date of installation or thirty (30) days after the date of shipment
from Lessor’s facility, the Equipment (other than accessories and electrodes) will be free from defects in material and workmanship under
normal use and service. Accessories and electrodes shall be warranted for ninety (90) days from the date of shipment. After such thirty (30)
and ninety (90) day periods the warranty will be as set forth on Exhibit B. During such 30/90 period Lessor will at no charge to the Lessee
either repair or replace (at Lessor’s sole option) any part of the Equipment found by Lessor to be defective in material or w orkmanship. If
Lessor’s inspection detects no defects in material or workmanship, Lessor’s regular service charges shall apply. Le ssor shall not be
responsible for any Equipment defect failure of the Equipment to perform any specified function, or any other nonconformance of the
Equipment caused by or attributable to (i) any modification of the Equipment by the Lessee, unless such mo dification is made with the
prior written approval of Lessor; (ii) the use of the Equipment with any associated or complementary equipment accessory or software not
specified by Lessor; or (iii) any misuse or abuse of the Equipment: (iv) exposure of the Equipment to conditions beyond the environmental,
ZOLL ONE PROGRAM
2
Revised 03-15-2022
power or operating constraints specified by Lessor; or (v) installation or wiring of the Equipment other than in accordance w ith Lessor’s
instructions. Warranty does not cover items subject to normal wear and burnout during use, including but not limited t o lamps, fuses,
batteries, cables and accessories. The foregoing warranty does not apply to software included as part of the Equipment (including software
embodied in read-only memory known as “firmware”).
Except for the warranties contained in this Section 6 and Exhibit B (Worry-Free Service Plan), Lessor makes no further warranties, and
specifically disclaims all implied warranties.
7. EQUIPMENT OWNERSHIP; LOCATION. As between Lessor and Lessee, Lessor is the sole owner of the Equipment and has sole
title thereto. Lessee may not relocate any Equipment or other Collateral from the Equipment Location specified in the applicable Schedule
within the United States without the prior written consent of Lessor.
8. RISK OF LOSS AND INSURANCE. Lessee assumes any and all risk of loss or damage to the Equipment until such Equipment is
returned to and received by Lessor in accordance with the terms and conditions of this Master Agreement. Lessee agrees to kee p the
Equipment and other Collateral in its possession insured at Lessee’s expense against all risks of loss from any cause whatsoever,
including, loss by fire (including extended coverage), theft and damage, and such insurance shall cover not less than the (a) amount equal
to the sum of all Rent and other amounts due and owing with respect to such Equipment as of the date of payment of such amoun t for the
then remaining Term, plus the estimated total retail price that would be paid for any specified Equipment in an arm’s length transaction
(“Fair Market Value”) as of the scheduled expiration of the then-applicable Term of the related Lease (“Stipulated Loss Value”) or (b) with
respect to any other Collateral, the replacement value thereof. Lessee also agrees that it shall carry commercial general lia bility insurance
in an amount not less than $5,000,000 total liability per occurrence. Lessee shall cause Lessor and its affiliates, and its and their successors
and assigns, to be named loss payees with respect to property insurance and additional insureds with respect to commercial general liability
insurance. Each policy shall provide that the insurance cannot be canceled without at least 30 days’ prior written notice to Lessor. In the
event of loss or claim, lessee will be responsible for all deductibles and/or retentions. All insurance required by this Master Agreement shall
include a waiver of rights of recovery against Lessor or its insurers by the Lessee and its insurers, as well as a waiver of subrogation against
Lessor or its insurers. All insurance required by this agreement is primary and non -contributory to any other insurance maintained by
Lessor. Lessee shall provide to Lessor (i) on or prior to the Delivery Date for each Lease, and from time to time thereafter througho ut the
Total Term of each Lease, certificates of insurance evidencing such insurance coverage, and (ii) upon Lessor’s request, copies of t he
insurance policies. If Lessee fails to provide Lessor with such evidence, then Lessor will have the right, but not the obligation, to purchase
such insurance protecting Lessor at Lessee’s expense. Lessee’s expense shall include the full premium paid for such insurance and any
customary charges, costs, or fees of Lessor, including but not limited to deductibles and retentions in the event of loss. Lessee agrees to
pay such amounts in substantially equal installments allocated to each Rent payment
9. CASUALTY LOSS. Lessee shall notify L essor of any condemnation, taking, loss, destruction, theft, or damage beyond repair of
Equipment (“Casualty Loss”) or repairable damage to any Equipment not later than 5 days following the date of any such occurr ence. In
the event any Casualty Loss shall occur, on the next Rent payment date Lessee shall pay Lessor the Stipulated Loss Value of the Equipment
suffering the Casualty Loss. In the event of any repairable damage to any Equipment, the Lease shall continue with respect to such
Equipment without any abatement of Rent and Lessee shall at its expense cause such Equipment to be repaired to the condition it is required
to be maintained in pursuant to Section 5 not later than 30 days from the date of the occurrence.
10. INSPECTION. Lessor and Lessor’s agents shall have the right, from time to time, during Lessee’s normal business hours, and without
disruption to Lessee’s operations, to enter the premises where the Equipment is located for the purpose of inspecting the Equipment.
11. TAXES. Lessor shall report and pay all license and registration fees and all taxes, fees, levies, imposts, duties, assessments, char ges
and withholdings of any similar nature, however designated (including, any value added, transfer, sales, use, gross receipts, business,
occupation, excise, personal property, real property, stamp or other taxes) (“Taxes”) now or hereafter imposed or assessed by governmental
body, agency or taxing authority upon the purchase, ownership, delivery, installation, leasing, rental, use or sale of the Equipment, the Rent
or other charges payable hereunder, or otherwise upon or in connection with any Lease, whether assessed on Lessor or Lessee, other than
any such Taxes required by law to be reported and paid by Lessee (“Lessee Taxes”). Lessee shall within 10 days of invoice reimburse
Lessor for all such Lessee Taxes paid by Lessor, together with any penalties or interest in connection therewith attributable to Lessee’s acts
or failure to act, excluding
(a) Lessee Taxes on or measured by the overall gross or net income of Lessor, (b) as to any Lease or the related Equipment, Lessee Taxes
attributable to the period after the return of such Equipment to Lessor, and (c) Lessee Taxes imposed as a result of a sale or other transfer by
Lessor of any portion of its interest in any Lease or in any Equipment, except for a sale or other transfer to Lessee or a sale or other transfer
occurring after and during the continuance of any Lessee Default.
12. GENERAL INDEMNITY. To the extent permitted by applicable law, Lessee shall indemnify, defend, and hold harmless Lessor, its
employees, officers, directors, agents, and assignees from and against any and all claims arising out of or in connection with any matter
involving this Master Agreement, the Equipment, or any Lease.
13. TAX BENEFIT INDEMNITY. Lessor and Lessee agree that Lessor is entitled to certain federal, state, and local tax benefits available
to an owner of Equipment (collectively, “Tax Benefits”). Lessee represents, warrants, and covenants to Lessor that (a) all Equipment will
be used solely within the United States; and ( b) Lessee will take no position inconsistent with the assumption that Lessor is the owner of
ZOLL ONE PROGRAM
3
Revised 03-15-2022
the Equipment for federal, state, and local tax purposes. If, due to any act or omission of Lessee or any party acting through Lessee, or the
breach or inaccuracy of any representation, warranty or covenant of Lessee contained the Master Agreement, Lessor reasonably determines
that it cannot claim, is not allowed to claim, loses or must recapture any or all of the Tax Benefits otherwise available with respect to the
Equipment subject to any Lease (a “Tax Loss”), then Lessee shall, promptly upon demand pay to Lessor an amount sufficient to provide
Lessor the same after -tax rate of return and aggregate after-tax cash flow through the end of the then-applicable Term of such Lease that
Lessor would have realized but for such Tax Loss except where the Lessor would not be entitled to such Tax Benefits.
14. LIMITATION OF LIABILITY. LESSOR SHALL HAVE NO LIABILITY TO LESSEE, ITS CUSTOMERS, EMPLOYEES,
DIRECTORS, AGENTS OR ASSIGNS OR ANY THIRD PARTIES FOR ANY DAMAGES AT LAW OR IN EQUITY (INCLUDING,
INCIDENTAL, INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES BASED ON STRICT OR ABSOLUTE
TORT LIABILITY OR LESSOR’S NEGLIGENCE) ARISING OUT OF THIS MASTER AGREEMENT OR CONCERNING ANY
EQUIPMENT OR SOFTWARE . LESSEE WAIVES ALL RIGHTS AND REMEDIES AGAINST LESSOR CONFERRED UPON
LESSEE BY THE UCC.
15. LESSEE REPRESENTATIONS AND COVENANTS.
Lessee represents, warrants and covenants to Lessor that as of the date of this Master Agreement and for so long as this Master Agreement
shall remain in effect: (a) ALL EQUIPMENT WILL BE USED FOR BUSINESS PURPOSES ONLY AND NOT FOR PERSONAL,
FAMILY OR HOUSEHOLD PURPOSES; (b) Lessee is duly organized and validly existing under applicable law in its jurisdiction of
formation as a political subdivision of the State of [STATE]; (c) Lessee has the power and authority to enter into the Master Agreement; (d)
the execution, delivery and performance of the Master Agreement by Lessee have been duly authorized; (e) the execution, delivery and
performance of the Master Agreement by Lessee do not (1) conflict with any of Lessee’s organizational documents, (2) contravene, conflict
with, constitute a default under or violate any laws applicable to the Lessee, (3) contravene, conflict or violate any applicable order, writ,
judgment, injunction, decree, determination or award of any governmental authority by which Lessee or any of its subsidiaries or any of their
property or assets may be bound or affected or (4) require any action by, filing, registration, or qualification with, or governmental approval
from, any governmental authority not already obtained or completed; (f) the Master Agreement is enforceable against Lessee in accordance
with its terms and such terms do not violate or create a default under any instrument or agreement binding on Lessee; (g) as of the date of its
execution of this Master Agreement and as of the Delivery Date of any Equipment, there are no pending or threatened actions or proceedings
before any court, administrative agency or other governmental authority related to this Master Agreement or the power or authority of Lessee
to enter into this Master Agreement; (h) Lessee shall comply with the requirements of all applicable laws and regulations; (i) the Master
Agreement shall be effective against all creditors of Lessee under applicable law, including fraudulent conveyance and bulk transfer laws, and
shall raise no presumption of fraud; (j) all financial statements and other related information furnished by Lessee shall fairly present Lessee’s
financial position as of the dates given on such statements; (k) Lessee’s name set forth in the signature block below is Lessee’s full and
accurate legal name; (l) Lessee’s form and jurisdiction of organization, “location” (within the meaning of UCC Section 9-307), organization
number and federal tax identification number are as set forth on Annex A hereto. Lessee agrees to provide Lessor advance written notice of
any change in any of the representations and covenants set forth in clauses (g) through (l) of this Section 15.
16. DEFAULT. Any of the following shall constitute a default by Lessee (a “Lessee Default”) under this Master Agreement and all Leases:
(a) Lessee fails to pay any Rent payment or any other amount payable to Lessor under this Master Agreement or any Schedule on the date
due; or (b) Lessee defaults on or breaches any of the other terms and conditions of the Master Agreement and all Leases; or ( c) any
representation or warranty made by Lessee in the Master Agreement proves to be incorrect, false or misleading when made or de emed
made; or (d) any change occurs in relation to Lessee’s, or any guarantor of all or any portion of Lessee’s obligations under the Master
Agreement or any Lease (“Guarantor’s”), business, management, ownership or financial condition that would have a material adverse effect
on Lessee’s ability to perform its obligations under this Master Agreement or any Schedule or Guarantor’s ability to perform its obligations
under its guaranty; or (e) Lessee or Guarantor dissolves or otherwise terminates its existence, ceases to do business or becomes insolvent or
fails generally to pay its debts as they become due; or (f) any Collateral is levied against, seized or attached; or (g) Less ee or Guarantor
makes an assignment for the benefit of creditors; or (h) a proceeding under any bankruptcy, reorganization, arrangement of debt, insolvency
or receivership law is filed by or against Lessee or Guarantor (and, if such proceeding is involuntary, it is not dismissed within 60 days after
the filing thereof) or Lessee or Guarantor takes any action to authorize any of the foregoing matters; or (i) any letter of credit or guaranty
issued in support of a Lease is revoked, breached, cancelled or terminated (unless consented to in advance in writing by Lessor); or (j) any
Guarantor fails to fulfill its obligations in favor of Lessor pursuant to its guaranty; or (k) Lessee merges or consolidates with any other
corporation or entity, or sells, rents or disposes of all or substantially all of its assets without the prior written consent of Lessor.
17. REMEDIES. If a Lessee Default occurs, Lessor may, in its sole discretion, exercise one or more of the following remedies: (a) declare
all amounts due and to become due in the current year under any or all Leases to be immediately due and payable; (b) terminate this Master
Agreement or any Lease; (c) take possession of, or render unusable, any Collateral wherever such Collateral may be located, without
demand or notice and without any court order or other process of law, and no such action shall constitute a termination of any Lease; (d)
require Lessee to deliver the Collateral to a location specified by Lessor or allow Lessor access to retrieve such collateral; (e) terminate any
other agreement that Lessor may have with Lessee; or (f) exercise any other right or remedy available to Lessor at law or in equity. To the
extent permitted by law, Lessee shall pay Lessor all costs and expenses that Lessor may incur to maintain, safeguard, or preserve the
Collateral, and other expenses incurred by Lessor in enforcing any of the terms, conditions, or provisions of this Master Agreement
(including legal fees and collection agency costs). Upon repossession or surrender of any Equipment or Collateral, Lessor may rent, sell, or
otherwise dispose of the Equipment and/or Collateral in a commercially reasonable manner, with or without notice and at public or private
ZOLL ONE PROGRAM
4
Revised 03-15-2022
sale, and apply the net proceeds thereof to the amounts owed to Lessor hereunder . Any proceeds of any sale or rent of such Equipment in
excess of the amounts owed to Lessor hereunder shall be retained by Lessor. Lessee agrees that with respect to any notice of a sale required
by law to be given, ten (10) days’ notice shall constitute reasonable notice. Upon payment of all past due Rent and the Stipulated Loss
Value together with interest at the rate of 1.5% per month (or such lesser rate as is the maximum rate allowable under applicable law) from
the date declared due until paid, Lessor will transfer to Lessee all of Lessor’s interest in the Equipment for which such Rent and Stipulated
Loss Value has been paid, which transfer shall be on an “AS IS, WHERE IS” basis, without any warranty, express or implied, from Lessor,
other than the absence of any liens or claims by or through Lessor. With respect to any exercise by Lessor of its right to recover and/or
dispose of any Equipment or other Collateral securing Lessee’s obligations under any Schedule, Lessee acknowledges and agrees as
follows: (1) Lessor shall have no obligation, subject to the requirements of commercial reasonableness, to clean-up or otherwise prepare the
Equipment or any other Collateral for disposition, ( 2) Lessor may comply with any applicable state or Federal law requirements in
connection with any disposition of the Equipment or other Collateral, and any actions taken in connection therewith shall not be deemed to
have adversely affected the commercial reasonableness of any such disposition, and (3) Lessor may convey the Equipment and any other
Collateral on an “AS IS, WHERE IS” basis, and without limiting the generality of the foregoing, may specifically exclude or disclaim any and
all warranties, including any warranty of title or the like with respect to the disposition of the Equipment or other Collateral, and no such
conveyance or such exclusion or such disclaimer of any warranty shall be deemed to have adversely affected the commercial reasonableness
of any such disposition. These remedies are cumulative of every other right or remedy given hereunder or now or hereafter existing at law
or in equity or by statute or otherwise and may be enforced concurrently or separately from time to time.
18. TRUE LEASE; SECURITY INTEREST. LESSEE WAIVES ANY AND ALL RIGHTS AND REMEDIES OTHERWISE
GRANTED TO LESSEE BY UCC §§2A -508 THROUGH 2A-522 AS DEEMED APPLICABLE. If and to the extent that this Master
Agreement is deemed a security agreement, Lessee hereby grants to Lessor, its successors and assigns, a security interest in all of Lessee’s
rights under and interest in the Equipment, all additions to the Equipment, and all proceeds of the foregoing. Such security interest secures
all obligations owing by Lessee to Lessor. Lessee authorizes Lessor and any assignee of all or any portion of Lessor’s interest in the Master
Agreement (“Assignee”) to file UCC financing statements disclosing Lessor’s or Assignee’s interest in the Equipment and in an y
“Additional Collateral” set forth in any Schedule. Lessee shall provide Lessor with at least forty-five (45) days’ prior written notice of any
change to Lessee’s principal place of business, organization, or incorporation.
19. ASSIGNMENT. Lessee shall not transfer, sublease, or assign any of its rights or obligations under the Master Agreement or any Lease.
20. TERM OF MASTER AGREEMENT. This Master Agreement shall commence and be effective upon the execution hereof by both
parties and shall continue in effect until the expiration of the initial term set forth in the master lease schedule. However, no termination of
this Master Agreement pursuant to the preceding sentence shall be effective with respect to any lease that commenced prior to such
termination until the expiration or termination of such lease and the satisfaction by lessee of all of its obligations hereunder with respect
thereto.
21. WAIVER OF JURY TRIAL. Lessee and lessor hereby expressly waive any right to demand a jury trial with respect to any action in
connection with this master agreement.
22. NOTICES. All notices required or permitted to be given under this Master Agreement shall be in writing and shall be deemed to have
been duly given if delivered personally or mailed via certified mail or a nationally recognized overnight courier service to the respective
addresses set forth on Annex A hereto (or such other address or fax number as either party shall so notify the other).
23. MISCELLANEOUS.
(a) Governing Law/Venue. This master agreement and each lease shall be governed by the internal laws (as opposed to conflicts of law
provisions) of the Commonwealth of Massachusetts. Lessor and Lessee consent to the jurisdiction of any local, state, or Federal court
located within the Commonwealth of Massachusetts and waive any objection relating to improper venue or forum non-convenience to the
conduct of any proceeding in any such court.
(b) Credit Review and Assurances. Lessee consents to a credit review by Lessor for each Lease. Lessee agrees to promptly execute and
deliver to Lessor such further documents and take such further action as Lessor may request in order to carry out the intent and purpose of
this Master Agreement more effectively . Without limiting the generality of the foregoing, Lessee agrees (i) to furnish to Lessor from time
to time, its certified financial statements, officer’s certificates and appropriate resolutions, opinions of counsel and such other information
and documents as Lessor may reasonably request, and (ii) to execute and timely deliver to Lessor any documents that Lessor deems
reasonably necessary under applicable law to perfect or protect Lessor’s security interest in the Collateral or to evidence Lessor’s ownership
interest therein as the case may be; provided, however, that Lessee authorizes Lessor to file any such financing statement or any amendment
or continuation thereof or other document without Lessee’s authentication to the extent permitted by applicable law; provided, however,
Lessor agrees to file a release or termination of any such financing statement within thirty (30) days after the end of the total term for such
Collateral . It is also agreed that Lessor or Lessor’s agent may, and is hereby authorized to, file as a financing statement, any rent document
(or copy thereof, where permitted by law) that Lessor deems appropriate to perfect or protect Lessor’s security interest in the Collateral or
to evidence Lessor’s ownership interest therein , at Lessor’s cost and expense; provided, however, Lessor agrees to file a release or
termination with respect to such financing statement or rent document within thirty (30) days after the end of the total term for such
Collateral or Equipment.
ZOLL ONE PROGRAM
5
Revised 03-15-2022
(d) Entire Agreement; Amendments. This Master Agreement constitutes the entire agreement between Lessor and Lessee relating to the
leasing of the Equipment, and supersedes all prior agreements relating thereto, whether written or oral, and may not be amended or modified
except in a writing signed by the parties hereto.
(e) No Waiver. Any failure of Lessor to require strict performance by Lessee, or any written waiver by Lessor of any provision hereof,
shall not constitute consent or waiver of any other breach of the same or any other provision hereof.
(f) Invalidity. If any provision of this Master Agreement shall be prohibited by or invalid under law, such provision shall be ineffective
only to the extent of such prohibition or invalidity, without invalidating the remainder of such provision or the remaining provisions of this
Master Agreement, such Schedule.
(g) Counterparts. The Master Agreement may be executed in counterparts, and, when so executed, each counterpart shall be deemed to
be an original and such counterparts together shall constitute one and same instrument. The original of each Schedule shall constitute chattel
paper for purposes of the UCC. If there are multiple originals of a Schedule, the one marked “Lessor’s Copy” or words of simi lar import
shall constitute the only chattel paper.
(h) Survival. All obligations of Lessee to make payments to, or to indemnify, Lessor and all rights of Lessor shall survive the cancellation
or termination of this Master Agreement.
(i) Non-Appropriation. If Lessee is a state and/or a local government, Lessee represents that it has funds available to pay Rent until the
end of its then-current appropriation period, and that Lessee intends to request funds to make payments in each appropriation period from
now until the end of the Total Term. If either sufficient funds are not appropriated to make payments or any other amounts due under th is
Lease or (to the extent required by applicable law) this Lease is not renewed either automatically or by mutual ratification, this Lease shall
terminate, and Lessee shall not be obligated to make payments under this Master Agreement or the Lease beyond the then -current fiscal
year for which funds have been appropriated. Upon such an event, Lessee shall, no later than the end of the fiscal year for which payments
have been appropriated or the term of this Lease has been renewed, deliver possession of the Equipment to Lessor within fourteen (14) days.
If Lessee fails to deliver possession of the Equipment to Lessor, the termination shall nevertheless be effective but Lessee shall be responsible
for the payment of damages in an amount equal to the portion of Rent thereafter coming due that is attributable to the number of days after
the termination during which Lessee fails to deliver possession and for any other loss suffered by Lessor as a result of Lessee’s failure to
deliver possession as required. Lessee shall notify Lessor in writing within seven (7) days after (i) Lessee’s failure to appropriate funds
sufficient for the payment of the Rent or (ii) a) this Lease is not renewed or b) this Lease is renewed by Lessee (in which event this Lease
shall be mutually ratified and renewed), provided that Lessee’s failure to give any such notice under clause (i) or (ii) of this sentence shall
not operate to extend this Lease or result in any liability to Lessee.
IN WITNESS WHEREOF, Lessee and Lessor have executed this Master Agreement on the dates specified below.
LESSEE: [LESSEE NAME] LESSOR: ZOLL Medical Corporation
By:
By:
Name:
Title:
Name:
Title:
Date: Date:
ZOLL ONE PROGRAM
6
Revised 03-15-2022
Annex A to Master Agreement
MASTER LEASE AGREEMENT ANNEX A
Notice Information:
If to Lessor:
ZOLL Medical Corporation
If to Lessee:
[CUSTOMER NAME]
269 Mill Road
Chelmsford, MA 01824-4105
[CUSTOMER ADDRESS]
[CITY, STATE ZIPCODE]
Attn: Contracts Department Attn: [CONTACT NAME]
Lessee’s Information: Lessee hereby represents and warrants, as of the date of the Master Agreement and each Schedule (subject to any
updates provided to Lessor):
1. The exact legal name of Lessee, as set forth in its formation documents, is [XXX].
2. Lessee is a political subdivision in the State of [STATE].
3. Lessee’s federal tax identification number is: TAX ID NUMBER].
ZOLL ONE PROGRAM
7
Revised 03-15-2022
Schedule A1 to Master Agreement
COUNTERPART NO ______ _. TO THE EXTENT THAT THIS SCHEDULE CONSTITUTES CHATTEL PAPER (AS DEFINED IN
THE UCC), NO SECURITY INTEREST IN THIS SCHEDULE MAY BE CREATED THROUGH THE TRANSFER OR
POSSESSION OF ANY COUNTERPART OTHER THAN COUNTERPART NO. 1.
Internal Reference Number: [QUOTE NUMBER]
MASTER LEASE AGREEMENT SCHEDULE
ZOLL Medical Corporation (“Lessor”) and [CUSTOMER NAME] (“Lessee”) are parties to the Master Lease Agreement identified by the Master
Agreement Number specified above (the “Master Agreement”). This Schedule (which shall be identified by the Schedule Number specified above) and the
Master Agreement together comprise a separate Lease between the parties. The terms and conditions of the Master Agreement are hereby incorporated by
reference into this Schedule. All capitalized terms used in this Schedule without definition have the meanings ascribed to them in the Master Agreement.
1. LEASE.
A. Description of Items of Leased Equipment are listed on Exhibit A Equipment List attached hereto.
B. Initial Term: 120 Months
2. Lease Amount: [AMOUNT] starting net 30 (excluding any applicable taxes)
Amount is payable: in arrears _[X] monthly [X] quarterly [X] annually (check one)
Lessee shall pay Lessor the Rent payment specified above for the length of the Initial Term within thirty (30) days after the delivery of the Equipment and
monthly thereafter on the same date or on the last day of the calendar month if the month does not contain that date.
ZOLL will provide a one-time replacement option for each category of device. Within the first sixty (60) months of the Lease, Lessee may replace all capital
equipment provided under Exhibit A for the then available version of the corresponding device or, should a new platform be available, with the new
platform of like configuration. A second allotment of accessories and disposables will be provided, in the same quantity as the original order, within ninety
(90) days of the sixtieth (60 th) month of the Lease. As part of their one -time replacement option, Lessee may elect to replace all categories of equipment
simultaneously or separately. However, each category of equipment ( i.e., Vents, AP, X Series) must be replaced in full at the same time. For example, if
Lessee has five (5) Vents, it may not replace one (1) at a time, it must replace all five at the same time. For clarity, it should be noted that the initial term of
this Lease is 10-years for all items including subscriptions. All quoted items, including subscriptions and purchased warranties, may also be extended, or
transferred to any new equipment leased under the terms of this paragraph. Any additional items not listed in Exhibit A are t he financial responsibility of
Lessee.
3. LEASE PACKAGE: (if no blank is checked, Lessee will return the Equipment as provided in Section 5 at the end of the Initial Term)
___ Rental __X_ Fair Market Value
4. EQUIPMENT LOCATION:
5. LESSEE’S END-OF-LEASE-TERM OPTIONS.
(a) Rental. If the Rental option is selected above, and unless Lessee delivers to Lessor a termination notice ninety (90) days before the
expiration of the relevant term, the initial term shall, without any additional notice or documentation, be automatically ext ended for
successive calendar months (“Renewal Term”) with respect to all items of equipment then subject to this Rental through the end of the
month falling at least ninety (90) days after the date the Lessee shall have delivered to Lessor a termination notice with respect to this
Rental. For each calendar month of the then -applicable Renewal Term, Lessee shall pay to Lessor rent in an amount equal to the
monthly rent payment in effect immediately prior to such extension (or the appropriate pro rata portion of the rent payment t hen in
effect in the case of rent payable other than on a monthly basis), and all other provisions of the Master Agreement and this Schedule
shall continue to apply.
(b) Fair Market Value Option. If the Fair Market Value option is selected above, upon expiration of the Term and provided that the
Lease has not been terminated early by Lessor and Lessee is in compliance with the Lease in all respects, Lessee may purchase all (but
not less than all) of the Equipment, for the purchase amount that represents the Fair Market Value as defined in Section 8 of the Master
Agreement (plus all applicable Taxes), which amount shall be due and payable on or before the last day of the then -applicable Term.
If the Lessee does not elect to purchase the Equipment for the purchase amount, Lessee may either (a) return the Equipment in
accordance with Section 5 of the Master Agreement, or (b) continue making payments in an amount equal to the rent payment
obligations in effect immediately prior to the end of the Initial Term and all other provisions of the Master Agreement and this Schedule
shall continue to apply. In the event of option (b) where Lessee continues making rent payments, a Renewal Term will apply and will
continue through the end of the calendar month falling at least ninety (90) days after the date the Lessee shall have delivered to Lessor
a termination notice during the Renewal Term with respect to this Lease. In the event Lessor and Lessee are unable to agree on the Fair
Market Value of any Units of Equipment, Lessor shall select an independent appraiser to conclusively determine such amount with the
cost of the appraiser paid by Lessor.
ZOLL ONE PROGRAM
8
Revised 03-15-2022
IF LESSEE SHALL HAVE SELECTED PURCHASE OPTION B ABOVE WITH RESPECT TO A LEASE, BUT SHALL HAVE
SUBSEQUENTLY FAILED TO COMPLY WITH ITS OBLIGATIONS ARISING FROM ITS ELECTION, THEN THE THEN -APPLICABLE
TERM OF THIS LEASE SHALL, WITHOUT ANY ADDITIONAL NOTICE OR DOCUMENTATION, BE AUTOMATICALLY EXTENDED
FOR A RENEWAL TERM WITH RESPECT TO ALL ITEMS OF EQUIPMENT AS TO WHICH LESSEE SHALL HAVE SO FAILED TO
COMPLY WITH ITS OBLIGATIONS THROUGH THE END OF THE CALENDAR MONTH IN WHICH LESSEE SHALL HAVE COMPLIED WITH
SUCH OBLIGATIONS. FOR EACH CALENDAR MONTH OF THE RENEWAL TERM, LESSEE SHALL PAY TO LESSOR RENT IN AN
AMOUNT EQUAL TO THE MONTHLY RENT PAYMENT IN EFFECT IMMEDIATELY PRIOR TO SUCH EXTENSION (OR THE
APPROPRIATE PRO RATA PORTION OF THE RENT PAYMENT THEN IN EFFECT IN THE CASE OF RENT PAYABLE OTHER THAN
ON A MONTHLY BASIS), AND ALL OTHER PROVISIONS OF THE MASTER AGREEMENT AND THIS SCHEDULE SHALL CONTINUE
TO APPLY.
Notwithstanding any of the provisions of this Section 5 to the contrary, if any Lessee Default shall have occurred and be con tinuing at any time during the
last ninety (90) days of the then-applicable Term of this Lease, Lessor may cancel any Renewal Term or optional or other automatic extension of the then-
applicable Term immediately upon written notice to Lessee.
LESSOR AGREES TO LEASE TO LESSEE AND LESSEE AGREES TO LEASE FROM LESSOR THE EQUIPMENT DESCRIBED
IN SECTION 1.A ABOVE. SUCH LEASE WILL BE GOVERNED BY THE MASTER AGREEMENT AND THIS SCHEDULE,
INCLUDING THE IMPORTANT ADDITIONAL TERMS AND CONDITIONS SET FORTH ABOVE. IN THE EVENT OF ANY
CONFLICT BETWEEN THE TERMS OF THIS SCHEDULE AND THE MASTER AGREEMENT, THE TERMS OF THIS SCHEDULE
SHALL GOVERN.
LESSEE: [LESSEE NAME] LESSOR: ZOLL Medical Corporation
By:____ __ _ _ __ _ __ _ _ ___
By:____ __ _ _ __ _ _ _________
Name:_____ _ __ _ __ _ _ __ _
Title:___ _ _ __ _ __ _ _ __ _
Name:_____ _ __ _ __ _ _ __ _ _
Title:___ _ _ __ _ __ _ _ __ _ _
ZOLL ONE PROGRAM
9
Revised 03-15-2022
EXHIBIT A
Equipment List
Part # Product Description Quantity
ZOLL ONE PROGRAM
10
Revised 03-15-2022
EXHIBIT B
Worry-Free Service Plan for All Capital Equipment in Exhibit A
WORRY-FREE SERVICE PLAN
The following repair services for capital equipment included in Exhibit A are included under the Worry-Free Service Plan. Should
a device be deemed unrepairable, based on ZOLL’s generally accepted technical support practices, replacement of said device
shall be the responsibility of lessee.
1. Field Preventive Maintenance at Customer’s facility, including:
• Provide documentation for regulatory agencies
• Manage and track Customer’s PM schedule
• Test all device parameters
• Identify and/or troubleshoot potential issues and make recommendations
• Troubleshoot device(s) and/or accessories under contract
• Inspect battery chargers and review battery management as required
2. Telephone Support 24/7
3. General software updates
4. Free loaner equipment as required
5. Technical support
6. Waiver of shipping and handling fees
7. Waiver of Minimum Service Fee
8. Discounted Prices
• Discounted accessories and cables (27% discount)
• Discounted Lithium-ion SurePower II batteries (27% discount)
• Discounted (27% discount) parameter upgrade, such as SPO2, ETCO2, and temp upgrades, subject to a formal service
quotation agreed upon by both parties.
9. Repair or replacement of parts within the charger that are subject to normal wear and burnout during use, including but not
limited to, lamps, fuses, batteries, patient cables and accessories.
10. Repair or replacement (at ZOLL’s sole option), at no charge to the Customer, of the charger if it is affecting the integrity of
the device.
11. SurePower chargers (parts and labor covered for normal wear and tear)
12. ECG 12-lead cable replacement upon failure, (excluding physical damage), one replacement per unit per year
13. On-site Support including evaluation and packing of device for return to ZOLL’s Service Depot
• On-site Support – 48-72 hour response. Includes authorized on -site device repairs for all capital equipment included in
Exhibit A, evaluation, packing of device for return to ZOLL’s Service Depot.
• In the event of a reported device malfunction, the device should be made available to the Field Service Engineer (“FSE”)
during the scheduled visit at one of the two centrally located stations.
• A primary and back-up contact must be provided to the FSE for all communication.
• Routine service inspections will be carried out on Customer site during normal working hours (8.30am – 5.30pm, Monday
– Friday).
• Outside of normal business hours arrangements are available by request only. ZOLL reserves the right to charge
additional fees for such services, to be agreed between ZOLL and Customer.
• The postponement of a routine service inspection shall not diminish Customer’s responsibility for the continued proper
use and upkeep of the equipment, in accordance with the applicable user manuals.
14. On-site device deployment when repaired unit is returned
15. Lithium-ion SurePower II Battery replacement (upon end of life), subject to the following:
ZOLL ONE PROGRAM
11
Revised 03-15-2022
• Batteries must be maintained per ZOLL’s recommended maintenance program
• Batteries are replaced upon failure, one for one, throughout the term of the ExpertCare Service contract, should the
SurePower battery or SurePower Charger display a fault.
• Batteries must be evaluated, and the failure confirmed by ZOLL Technical Support and/or an on -site field service
technician.
• Up to three batteries per device will be covered for batteries acquired from ZOLL in last 24 months. (When service plan
purchased post-sale.)
• For batteries acquired from ZOLL over 24 months ago, one battery per device will be covered. (When Service Contract
purchased post-sale)
16. Accidental damage coverage. Includes one device outer housing replacement per year per device. Catastrophic damage
beyond repair will not be covered. ZOLL’s regular service charges shall apply if device is in need of a second outer housing
replacement within 12 months of previous outer housing replacement, providing device is still under Worry -Free Service plan.
ON-SITE SUPPORT OPTION
17. On-site Support, including evaluation and packing of device for return to ZOLL’s Service Depot
• On-site Support – 48-72 hour response. Includes authorized on -site device repairs for all capital equipment included in
Exhibit A, evaluation, packing of device for return to ZOLL’s Service Depot.
• In the event of a reported device malfunction, the device should be made available to the Field Service Engineer (“FSE”)
during the scheduled visit at one of the two centrally located stations.
• A primary and back-up contact must be provided to the FSE for all communication.
• Routine service inspections will be carried out on Customer site during normal working hours (8.30am – 5.30pm EST,
Monday – Friday).
• Outside of normal business hours arrangements are available by request only. ZOLL reserves the right to charge
additional fees for such services, to be agreed between ZOLL and Customer.
• The postponement of a routine service inspection shall not diminish Customer’s responsibility for the continued proper
use and upkeep of the equipment, in accordance with the applicable user manuals.
18. On-site device deployment when repaired unit is returned.
19. ECG 12-lead cable replacement upon failure (excluding physical damage), one replacement per unit per year
Zoning Text Amendment 6:1; 7:3; and 11:7 - Duplexes and Page 1 of 6
Jasper County
Planning and Building Services
358 Third Avenue - Post Office Box 1659
Ridgeland, South Carolina 29936
Phone (843) 717-3650 Fax (843) 726-7707
Lisa Wagner, CFM
Director of Planning and Building Services
lwagner@jaspercountysc.gov
Jasper County Council
Staff Report
Meeting Date: September 18, 2023
Project: Zoning Text Amendment – Article 6:1 – Table 1, Use Regulations,
Article 7:3 – Table 1, Schedule of Lot Area, Yard, Setback, and
Density, and Article 11:7, Industry Specific Conditional Use
Regulations, Sections 11:7.31, Duplexes, 11:7.32 Townhouses, and
11:7.33 Patio Homes
Applicant: Staff Initiated
Submitted For: 3rd Reading
Recommendation: Planning Commission Recommends Approval
Description: The Planning Commission expressed concern about duplexes being allowed in rural
residential areas where no public water or sewer system s are available, which led to a review of
housing products that are allowed at a higher rate of density. Currently, the Zoning Ordinance
allows duplexes to be built in the Residential Zoning District at a rate of 5 units per acre and 1 unit
per acre in the Rural Preservation Zoning District . The Residential Zoning District allows
townhouses to be developed w ith a density of 21 units per acre and patio homes to be developed
with a density of 6.70 acres. The Residential Zoning District encompasses much of the rural areas
in Jasper County and the Planning Commission recommends preserving the rural areas of Jaspe r
County.
Analysis: The specific sections of the o rdinance and the proposed changes to the Jaspe r County
Zoning Ordinance are outlined below. Strikethroughs represent language to be del eted, new
language is shown in red and an explanation of each Article of the Zoning Ordinance to be
amended is shown in blue.
1. Remove Duple xes as a conditional use from the R esidential(R), Residential Ridgeland
Lakes (RRL) and Rural Preservation (RP) Zoning Districts . Remove Townhouses and
Patio Homes as a conditional use in the Residential (R), Residen tial Ridgeland Lakes
(RRL) Zoning Districts from the Use Chart:
Zoning Text Amendment 6:1; 7:3; and 11:7 - Duplexes and Page 2 of 6
Article 6, Use Regulations, Section 6.1 - Table 1
2. Add a condition to Article 11:7.31, 11:7.32, and 11:7.33 to require duplexes, townhouses,
and patio homes to be located in areas where water and s ewer is available and to clarify
these types of housing products that are built for rental purposes wi ll be considered a
major subdivision.
Article 11:7.31 Duplexes:
Due to the unique design features of duplex housing, the following supple mental design
requirements shall apply:
1. Such projects shall be located in areas that are served b y public water an d sewer
providers. Septic systems, including community septic systems, are strictly prohibited.
2. Such projects shall have a minimum of one (1) acre and a maximum of ten (10) acres in
the Residential, Community Commercial and General Commercial Zoning Districts.
3. Such projects shall have a m inimum of two (2) acres and a maximum of t en (10) acres
in the Rural Preservation District.
4. For all units, th e lot area, yard, and setbacks shall be as prescribed in Article 7:3 -
Table1.
5. Building orientation shall be re presentative of that exhibited by s urrounding single -
family development.
6. The size, bulk, height and scale of proposed structures shall reflect the characteristics of
existing single-family structures in the area.
7. At least one duplex front door should be visible from the front of the structure.
8. Entrances should be visible and app roaches to the front entrance of each dwelling unit
should be clearly delineated by improved walkways and landscaping.
Residential Uses NAICS R RRL RP RC CC GC ID RE MB
Site Built Housing NA
Existing Single-Family Detached NA P P P P P P N N N
Single-Family Detached NA P P P P P P N N N
Second Single Family Residential
Dwelling Unit (Sec. 11:7.30)
NA C N C N C N N N N
Duplexes (Sec. 11:7.31) NA CN C N C N N C C N N N
Multi-Family, Apartments (Sec.
11:7.31.A)
NA N N N N C C N N N
Townhouses (Sec. 11:7.32) NA CN C N N N C C N N N
Patio Homes (Sec. 11:7.33) NA CN C N N N C C N N N
Zoning Text Amendment 6:1; 7:3; and 11:7 - Duplexes and Page 3 of 6
9. Not less than 10 percent of the project site shall be diverted to co ntiguous common
open space which is designed for use by the residents.
10. The site plan shall be designed in a way to complement the e xisting character of the
surrounding area. The Planning Commission may impos e such other requirements as it
deems n ecessary to protect the established character of the neighborhood, where
appropriate.
11. When a duplex development is proposed on a si ngle parcel of land for rental purpose s,
it shall be considered a major subdivision , except within an approved Planned
Development District (PDD) where a master plan has been approved, and must comply
with major site plan requirements,
Article 11:7.32 Townhouses:
Due to the unique design features of townhouses, the following supplemented design
requirements shall apply:
1. Such projects shall be located in a reas that are served by public water and sewer
providers. Septic systems, including community septic systems, are strictly prohibited.
2. Such projects shall have a minimum of one and half (1-1/2) acre.
3. Not more than eight (8) or fe wer than three (3) townho uses may be joined together,
with approximately the same front line (may be staggered).
4. Minimum distance between rows of buildings shall be not less than 20 feet.
5. For all units, the lot a rea, yard, and setbacks shall be as prescribed in Article 7:3-Table
1.
6. Sidewalks not less than four (4) feet in width shall be provided along the front property
line of each project, building.
7. Not less than 10 percent of the project site shall be diverted to contiguous common
open space which is designed for use by the residents.
8. The site plan shal l be designed in a way to complement the existing character of t he
surrounding area. The Plan ning Commission may impose such other requirements as it
deems necessary to protect the established character of the neighborhood, where
appropriate.
9. When a townhouse develop ment is proposed on a si ngle parcel of land for rental
purposes, it shall be considered a major subdivision, except within an approved Planned
Zoning Text Amendment 6:1; 7:3; and 11:7 - Duplexes and Page 4 of 6
Development District (PDD) where a development agreement is in effect and a master
plan has been approved, and must comply with major site plan requirements.
Article 11:7.33 Patio Homes:
Due to the unique design features of patio homes, the following supplemental design
requirements shall apply:
1. Such projects shall be located in areas that are served by public water and sewer
providers. Septic systems, including community septic systems, are strictly prohibited.
2. Such projects shall have a minimum of one (1) acre and a maximum of ten (10) acres.
2. For units in the applicable areas of the L evy-Limehouse Ove rlay District (LLOD) or
where water and sewer se rvice is provided in accordance with Article 6 of the Jasper
County Land Development Regulations, the lot area , ya rd, and setbacks shall be as
prescribed in Secti on 8:4. For units not me eting these requiremen ts, the minimum lot
size shall be .5 acre and th e yard, and setbacks shall be as prescribed in Section 7:3,
Table 1.
3. For all units, th e lot area, yard, and setba cks shall be as prescribed in Article 7:3 -
Table1.
4. Not less than ten pe rcent (10%) of the pr oject site shall be diverted to contiguous
common open space which is designed for use by the residents.
5. The site plan shall be designed in a way to complement the existing character of the
surrounding area. The Planning Commission ma y impose such other requirements as it
deems necessary to protect the e stablished character of the neighborhood, whe re
appropriate.
6. When a patio home development is proposed on a si ngle parcel of land for rental
purposes, it shall be considered a major subdivision, except within an approved Planned
Development District (PDD) where a development agreement is in effect and a master
plan has been approved, and must comply with major site plan requirements.
3. Change minimum lot sizes for Duplexes, Townhouses, and Patio Homes in the Residential
(R), Community Commercial (CC), and Gener al Commercial Zoning Districts for the
purpose of reducing allowed density . Increase setbacks for Duple xes, Townhouses, and
Patio Homes.
Article 7:3, Table 1, Schedule of Lot Area, Yard, Setback, and Density
Zoning Text Amendment 6:1; 7:3; and 11:7 - Duplexes and Page 5 of 6
Section 7:3 Table 1:
Schedule of Lot Area, Yard, Setback, and Density
By District
R RRL RP RC CC GC ID RE MB
Minimum Lot per Unit
Non Residential Area (SF)
40,000 N/A 2 acres 2 acres 10,000 10,000 12,000 2 acres 12,000
Residential
Single Family .5 acre 7,800 1 acre .5 acre (B) (A) N/A N/A N/A
Patio
6,500
N/A N/A N/A N/A
10,000
(B) 3,500 N/A N/A N/A
Duplex
8,500
N/A N/A
2 acres
N/A N/A
5,000
(B)
5,000
(A) N/A N/A N/A
Townhome
2,000
N/A N/A N/A N/A
1,800
3,500
1,800
2,000 N/A N/A N/A
(A) 4 Per Acre For Single Family Dwelling Units; 6 Per Acre For Attached Units.
(B) 2 Per Acre For Single Family Dwelling Units; 4 Per Acre For Attached Units.
Minimum Yard & Building Setback (feet)
Multifamily, Single-Family &
Non-Residential Uses PER UNIT Patio Duplex
Town-
home
R RRL RP RC CC GC ID RE MB All Districts
Minimum lot
width
50 50 200 200 80 80 90 200 90
Minimum lot
width 45 50 20
Front Front
Major Street
(Multi-Lane)
60 60 60
60 60 60 60 200 60
Major Street
(Multi-lane) 60* 60* 60*
Major Street
(Two-lane)
35 35 45 45
35 35 45 200 45
Major Street
(Two-lane)
25
35
25
35
25
35
Minor Street
25 15 25 25 25 25 25 150 25 Minor Street
15
25
15
25
10
20
Side Side
Residential
10 10 25 50 5 5 N/A N/A N/A Interior N/A 0 0
Non-
Residential
10 N/A 25 50 5 5 10 100 10
Street-
Side/Exterior
5
10 10 10
Rear Rear
Residential
25 20 25 100 10 10 N/A 100 N/A Residential 25
20
25
5
15
Non-
Residential
40 N/A 50 150 10 10 15 100 15
Non-
Residential N/A N/A N/A
*Access to units along a multi-lane major street shall generally have a common access onto a frontage road or similar, which
shall be considered a minor street; the frontage road or similar may encroach into the 60’ front setback from the multi-lane
major street.
Zoning Text Amendment 6:1; 7:3; and 11:7 - Duplexes and Page 6 of 6
Recommendation: Planning Commission recommends approval of the Z oning Text Amendment
as outlined above and reflected in the proposed ordinance, which is attached to this staff report.
Attachments:
1. Proposed Ordinance for Zoning Text Amendment – Article 6:1 Use Regulations, Article 7:3
- Table 1 Schedule of Lot Area, Yard, Setback, and Density, Article 11:7.31, 11:7.32, and
11:7.33
STATE OF SOUTH CAROLINA
COUNTY OF JASPER
ORDINANCE #O-2023-15
AN ORDINANCE
OF JASPER COUNTY COUNCIL
To Amend Article 6:1 – Table 1, Use Regulations; Article 7:3 – Table
1, Schedule of Lot Area, Yard, Setback, and Density ; Article 11:7,
Industry Specific C onditional Use Re gulations, Sections 11:7.31,
Duplexes; 11:7.32 Townhouses; and 11:7.33, Patio Homes of the
Jasper County Zoning Ordinance, to remove duplexes, townhouses,
and patio homes as a conditional use from certain Zoning Districts,
add conditional use requirements, increase the setback
requirements and reduce the allowed density for duplexes ,
townhomes, and patio homes.
WHEREAS, one of the principles of the Jasper County Comprehensive Plan and the Jasper
County Zoning Ordinance is to keep Jasper rural; and
WHEREAS, the Jasper County Zoning Ordinance regulates the location and use of buildings,
structures and land, the size of yards, the density and distribution of population, and establishes
development standards; and
WHEREAS, the Planning Commission recognizes that housing products such as, patio homes,
duplexes, and townhouses are a housing product that can benefit affordable housing, but should
be located where infrastructure exists; and
WHEREAS, the Planning Commission has reviewed the Official Jasper County Zoning Map and
has determined that the Residential Zoning District encompasses much of the rural areas of
Jasper County; and
WHEREAS, the Planning Commission recommend s that consideration should be given to
create other types of Zoning Districts to allow Patio Homes, Duplexes, and Townhouses near the
boundaries of the municipal limits; and
WHEREAS, the Council finds it is in the public interest to invoke the pending ordinance
doctrine upon first reading of this Ordinance, and announces a public hearing to be held prior to
or at second reading of this Ordinance, tentatively scheduled for the September 5, 2023 regularly
scheduled County Council meeting; and
WHEREAS, certain projects that were exempt from the moratorium and have filed completed
applications will not be required to comply with the Jasper County Zoning Ordinance as
amended; however, will have to comply with the Jasper County Zoning Ordinance in effect as of
August 20, 2023; and
WHEREAS, the Jasper County Planning Commission has recommended approval by County
Council to amend Article 6:1 – Table, Use Regulations; Article 7:3 – Table 1, Schedule of Lot
Area, Yard, Setback, and Density ; and Article 11:7, Industry Specific Conditional Use
Regulations, Sections 11:7.31, Duplexes; 11:7.32, Townhouses; and 11:7.33, Patio Homes of the
Jasper County Zoning Ordinance, to remove duplexes, townhouses, and patio homes as a
conditional use from certain Zoning Districts, add conditional use requirements, increase the
setback requirements and reduce the allowed density for duplexes, townhomes, and patio homes.
WHEREAS, this matter is now before the Jasper County Council for determination;
NOW THEREFORE, BE IT ORDAINED, by the Jasper County Council duly assembled and
by the authority of same:
1. Amend Jasper County Zoning Ordinance, Article 6:1 – Table 1 to read as follows:
Article 6, Use Regulations, Section 6.1 - Table 1:
Residential Uses NAICS R RRL RP RC CC GC ID RE MB
Site Built Housing NA
Existing Single-Family Detached NA P P P P P P N N N
Single-Family Detached NA P P P P P P N N N
Second Single Family Residential
Dwelling Unit (Sec. 11:7.30)
NA C N C N C N N N N
2. Amend Jasper County Zoning Ordinance, Article 7:3 – Table 1, Schedule of Lot Area, Yard,
Setback, and Density as shown on Exhibit A attached.
3. Amend Jasper County Zoning Ordinance, Article 11:7:31, Duplexes to read as follows:
Article 11:7.31 Duplexes:
Due to the unique design features of duplex housing, the following supplemental design
requirements shall apply:
1. Such projects shall be located in areas that are served by public water and
sewer providers. Septic systems, including community septic systems are
strictly prohibited.
2. Such projects shall have a minimum of one (1) acre and a maximum of ten
(10) acres in the Residential, Community Commercial and General
Commercial Zoning Districts.
3. Such projects shall have a minimum of two (2) acres and a maximum of ten
(10) acres in the Rural Preservation District.
4. For all units, the lot area, yard, and setbacks shall be as prescribed in Article
7:3-Table1.
5. Building orientation shall be representative of that exhibited by surrounding
single-family development.
6. The size, bulk, height and scale of proposed structures shall reflect the
characteristics of existing single-family structures in the area.
7. At least one duplex front door should be visible from the front of the structure.
8. Entrances should be visible and approaches to the front entrance of each
dwelling unit should be clearly delineated by improved walkways and
landscaping.
Duplexes (Sec. 11:7.31) NA CN C N C N N C C N N N
Multi-Family, Apartments (Sec.
11:7.31.A)
NA N N N N C C N N N
Townhouses (Sec. 11:7.32) NA CN C N N N C C N N N
Patio Homes (Sec. 11:7.33) NA CN C N N N C C N N N
9. The site plan shall be designed in a way to complement the existing character
of the surrounding area. The Planning Commission may impose such other
requirements as it deems necessary to protect the established character of the
neighborhood, where appropriate.
10. When a duplex development is proposed on a single parcel of land for rental
purposes, it shall be considered a major subdivision, except within an
approved Planned Development District (PDD) where a development
agreement is in effect and a master plan has been approved.
4. Amend Jasper County Zoning Ordinance, Article 11:7:32, Townhouses to read as follows:
Article 11:7.32 Townhouses:
Due to the unique design features of townhouses, the following supplemented design
requirements shall apply:
1. Such projects shall be located in areas that are served by water and sewer.
2. Such projects shall have a minimum of one and half (1-1/2) acre.
3. Not more than eight (8) or fewer than three (3) townhouses may be joined
together, with approximately the same front line (may be staggered).
4. Minimum distance between rows of buildings shall be not less than 20 feet.
5. For all units, the lot area, yard, and setbacks shall be as prescribed in Article
7:3-Table 1.
6. Sidewalks not less than four (4) feet in width shall be provided along the front
property line of each project, building.
7. Not less than 10 percent of the project site shall be diverted to contiguous
common open space which is designed for use by the residents.
8. The site plan shall be designed in a way to complement the existing character of
the surrounding area. The Planning Commission may impose such other
requirements as it deems necessary to protect the established character of the
neighborhood, where appropriate.
9. When a townhouse development is proposed on a single parcel of land for rental
purposes, it shall be considered a major subdivision, except within an approved
Planned Development District (PDD) where a development agreement is in
effect and a master plan has been approved.
5. Amend Jasper County Zoning Ordinance, Article 11:7:33, Patio Homes to read as follows:
Article 11:7.33 Patio Homes:
Due to the unique design features of patio homes, the following supplemental design
requirements shall apply:
1. Such projects shall be located in areas that are served by public water and sewer
providers. Septic systems, including community septic systems, are strictly
prohibited.
2. Such projects shall have a minimum of one (1) acre and a maximum of ten (10)
acres.
2. For units in the applicable areas of the Levy-Limehouse Overlay District (LLOD)
or where water and sewer service is provided in accordance with Article 6 of the
Jasper County Land Development Regulations, the lot area, yard, and setbacks
shall be as prescribed in Section 8:4. For units not meeting these requirements,
the minimum lot size shall be .5 acre and the yard, and setbacks shall be as
prescribed in Section 7:3, Table 1.
3. For all units, the lot area, yard, and setbacks shall be as prescribed in Article 7:3-
Table 1.
4. Not less than ten percent (10%) of the project site shall be diverted to contiguous
common open space which is designed for use by the residents.
5. The site plan shall be designed in a way to complement the existing character of
the surrounding area. The Planning Commission may impose such other
requirements as it deems necessary to protect the established character of the
neighborhood, where appropriate.
6. When a patio home development is proposed on a single parcel of land for rental
purposes, it shall be considered a major subdivision, except within an approved
Planned Development District (PDD) where a development agreement is in effect
and a master plan has been approved, and must comply with major site plan
requirements.
________________________________
L. Martin Sauls IV
Chairman
ATTEST:
________________________________
Wanda Simmons
Clerk to Council
ORDINANCE O-2023-15
First Reading: August 21, 2023
Second Reading: September 5, 2023
Public hearing: September 5, 2023
Adopted: September 18, 2023
_____________________________________________
Considered by the Jasper County Planning Commission at its meeting on
August 8, 2023.
_____________________________________________
Reviewed for form and draftsmanship by the Jasper County Attorney.
David L. Tedder Date
Section 7:3 Table 1:
Schedule of Lot Area, Yard, Setback, and Density
By District
R RRL RP RC CC GC ID RE MB
Minimum Lot per Unit
Non Residential Area (SF)
40,000 N/A 2 acres 2 acres 10,000 10,000 12,000 2 acres 12,000
Residential
Single Family .5 acre 7,800 1 acre .5 acre (B) (A) N/A N/A N/A
Patio
6,500
N/A N/A N/A N/A
10,000
(B) 3,500 N/A N/A N/A
Duplex
8,500
N/A N/A
2 acres
N/A N/A
5,000
(B)
5,000
(A) N/A N/A N/A
Townhome
2,000
N/A N/A N/A N/A
1,800
3,500
1,800
2,000 N/A N/A N/A
(A) 4 Per Acre For Single Family Dwelling Units; 6 Per Acre For Attached Units.
(B) 2 Per Acre For Single Family Dwelling Units; 4 Per Acre For Attached Units.
Minimum Yard & Building Setback (feet)
Multifamily, Single-Family &
Non-Residential Uses PER UNIT Patio Duplex
Town-
home
R RRL RP RC CC GC ID RE MB All Districts
Minimum lot
width
50 50 200 200 80 80 90 200 90
Minimum lot
width 45 50 20
Front Front
Major Street
(Multi-Lane)
60 60 60
60 60 60 60 200 60
Major Street
(Multi-lane) 60* 60* 60*
Major Street
(Two-lane)
35 35 45 45
35 35 45 200 45
Major Street
(Two-lane)
25
35
25
35
25
35
Minor Street
25 15 25 25 25 25 25 150 25 Minor Street
15
25
15
25
10
20
Side Side
Residential
10 10 25 50 5 5 N/A N/A N/A Interior N/A 0 0
Non-
Residential
10 N/A 25 50 5 5 10 100 10
Street-
Side/Exterior
5
10 10 10
Rear Rear
Residential
25 20 25 100 10 10 N/A 100 N/A Residential 25
20
25
5
15
Non-
Residential
40 N/A 50 150 10 10 15 100 15
Non-
Residential N/A N/A N/A
*Access to units along a multi-lane major street shall generally have a common access onto a frontage road or similar,
which shall be considered a minor street; the frontage road or similar may encroach into the 60’ front setback from the
multi-lane major street.
Exhibit A
JASPER COUNTY
RIDGELAND-CLAUDE DEAN AIRPORT
AWOS III P/T PROJECT CONTRACT FORM
HOLT PROJECT No. SC1001-18 Page CF-1 of 6
CONTRACT FORM
THIS AGREEMENT is dated as of the ______ day of ________________ in the year 2023 by and between
JASPER COUNTY, SOUTH CAROLINA (hereinafter called OWNER) and TRINITY ELECTR ICAL
SERVICES, INC. (hereinafter called CONTRACTOR).
OWNER and CONTRACTOR, in consideration of the mutual covenants hereinafter set forth, agree as follows:
Article 1. SCOPE OF WORK.
This project generally consists of construction of a new automated weather observation system (AWOS III P/T)
at Ridgeland-Claude Dean Airport. Work includes the AWOS III P/T with fixed tower, minor site work and
electrical connections, as further described in the attached ATTACHMENT A – SCHEDULE OF VALUES.
The maximum contract time for the project if all bid schedules are awarded is 60 calendar days. The project
will be constructed in multiple phases, some of which will require work within the taxiway safety area.
The Project, for which the Work under the Contract Documents may be the whole or only a part, is generally
described as follows:
RIDGELAND-CLAUDE DEAN AIRPORT
AWOS III P/T PROJECT
FAA A.I.P. No. 3-45-0048-016-2021 (Design)
FAA A.I.P. No. 3-45-0048-018-2023 (Construction)
Article 2. ENGINEER.
The Project has been designed by:
HOLT CONSULTING COMPANY, LLC
2801 Devine Street, Suite 201
Columbia, South Carolina 29205
(803) 771-4658
who is hereinafter called ENGINEER and who is to act as OWNER's representative, assume all duties and
responsibilities and have the rights and authority assigned to ENGINEER in the Contract D ocuments in
connection with completion of the Work in accordance with the Contract Documents.
Article 3. CONTRACT TIME.
3.1 The Work will be completed and ready for final payment in accordance with paragraph 50 -15 of the
General Provisions as follows:
Maximum contract time for substantial completion of the AWOS III P/T PROJECT shall be within 60
consecutive calendar days from the commencement date specified in the written Notice-to-Proceed.
JASPER COUNTY
RIDGELAND-CLAUDE DEAN AIRPORT
AWOS III P/T PROJECT CONTRACT FORM
HOLT PROJECT No. SC1001-18 Page CF-2 of 6
No time will be added to the duration shown above. All work will be completed in accordance with the
phases prescribed in Section 01010, “Scope of Work”, and the Contract Drawings.
3.2 Liquidated Damages. OWNER and CONTRACTOR recognize that time is of the essence of this
Agreement and that OWNER will suffer financial loss if th e Work is not completed within the times
specified in paragraph 3.1 above, plus any extensions thereof allowed in accordance with Paragraph
80-07 of the General Provisions. They also recognize the delays, expense and difficulties involved in
proving in a legal or arbitration proceeding the actual loss su ffered by OW NER if the Work is not
completed on time. Accordingly, instead of requiring any such proof, OWNER and CONTRACTOR
agree that as liquidated damages for delay (but not as a penalty) CONTRACTOR shall pay OWNER
the amount as stipulated in General Conditions Section 80-08 for each calendar day that expires after
the time specified in paragraph 3.1 for Completion and readiness for Payment.
3.3 CONTRACTOR understands and hereby expressly agrees that in addition to liquidated dama ges
specified in Article 3.2 above, to pay the OWNER the actual costs to OWNER for any in spector or
inspectors necessarily employed by OWNER on the Work and the actual costs to OWNER for the
ENGINEER's observation of construction and project representative services including all travel and
subsistence expenses after the date specified for completion until the Work is completed and ready for
final payment. Further, the CONTRACTOR agrees that the sums to be paid the OWNER may be
deducted from the sum due the CONTRACTOR for work performed as provided in Section 90 of the
General Provisions.
Article 4. CONTRACT PRICE.
4.1 OWNER shall pay CONTRACTOR for completion of the Work in accordance with the Contr act
Documents, and in accordance with the unit bid prices submitted for the Bid on October 4, 2022 , with
an initial contract amount of $287,070.00, based on negotiated reduction in scope of work to fit
available funds as shown on ATTACHMENT A – SCHEDULE OF VALUES, to be paid based upon the
actual quantities approved and accepted in accordance with the Contract Documents.
Article 5. PAYMENT PROCEDURES.
CONTRACTOR shall submit Applications for Payment in accordance with Section 90 of the General Provisions
but in no case shall submit Applications for Payment more than once per month. Applications for Payment will
be processed by ENGINEER as provided in the General Provisions.
5.1 Progress Payments. OWNER will make progress payments on account of the Contract Price on
the basis of CONTRACTOR's Applications for Payment as recommended by ENGINEER, within 30
calendar days after receipt of an application for payment that has been reviewed and approved by the
Engineer. The last Friday of every month that work was performed shall be the ending date for
establishing the quantity of units completed for submission in the application for payment.
5.1.1. Progress payments will be made in an amount equal to the percentage indicated below, but,
in each case, less the aggregate of payments previously made and less such amounts as
ENGINEER shall determine, or OWNER may withhold, in accordance with Section 90 of the
General Provisions.
JASPER COUNTY
RIDGELAND-CLAUDE DEAN AIRPORT
AWOS III P/T PROJECT CONTRACT FORM
HOLT PROJECT No. SC1001-18 Page CF-3 of 6
90% of Work completed as determined by ENGINEER.
90% of materials and equipment not incorporated in the Work (but delivered, suitably stored
and accompanied by documentation satisfactory to OWNER as provided in paragraph 90-07
of the General Provisions).
5.1.2 With each application for payment, the Contractor shall submit his DBE expenditures for the
month as well as a total -to-date. The expenditure report shall include the name, date and
amounts paid to each DBE subcontractor.
5.1.3 Wi th each application for pa yment, the Contractor shall submit an updated CPM schedule
delineating activities completed and those remain to be completed. Additionally, he needs to
identify any log ic changes made since submissi on of his first (baseline) C PM schedule.
Detailed Bar Chart, Network Diagram and Standard Report for all activities are required and
shall be submitted on both hard (paper) copies as well as the electronic files provided via
email.
5.1.4 The Contractor is advised that the certified payroll for his organization as well as all of his
subcontractors must be current and submitted to Owner within 14 days of the requested
Application for Payment.
5.1.5 The Contractor shall submit a manual set(s) for each item of equipment installed as part of the
Contract work when sub mitting a pay request for payment of the item(s ) requiring manual
set(s). The set(s) shall include operation, maintenance, and parts manuals.
5.1.6 Contractor's failure to submit an acceptable DBE expenditure report, CPM schedule update,
parts/operational/maintenance manual set(s), or not meeting the requirements for the certified
payroll submission schedule, as outlined in 5.1.2, 5.1.3 and 5.1.4, and 5.1.5 above, will result
in withholding of his progress payment by the Owner until these requirements are satisfied.
5.2 Final Payment. Upon final completion and acceptance of the Work in accordance with Section 50 of
the General Provisions, OWNER shall pay the remainder of the Contract Price as recommended by
ENGINEER as provided in said paragraph 90-08.
Article 6. CONTRACTOR'S REPRESENTATIONS.
In order to induce OWNER to enter into this Agreement, CONTRACTOR makes the following representations:
6.1 CONTRACTOR has familiarized itself with the nature a nd extent of the Contract Do cuments, Work,
site, locality, and all local conditions and Laws and Regulations that in any manner may affect cost,
progress, performance or furnishing of the Work.
6.2 CONTRACTOR has obtained and carefully studied (or assumes responsibility for obtainin g and
carefully studying) all such examinations, investigations, explorations, tests, reports and studies which
pertain to the subsurface or physical conditions at or contiguous to the site or otherwise may affect the
JASPER COUNTY
RIDGELAND-CLAUDE DEAN AIRPORT
AWOS III P/T PROJECT CONTRACT FORM
HOLT PROJECT No. SC1001-18 Page CF-4 of 6
cost, progress, performance or furnishing of the Work as CONTRACTOR considers necessary for the
performance or furnishing of the W ork at the Contract Price, within the Contract Time and in
accordance with the other terms and conditions of the Contract Documents, inc luding the General
Provisions and no additional examinations, investigations, explorations, tests, r eports, studies or
similar information or data are or will be required by CONTRACTOR for such purposes.
6.3 CONTRACTOR has re viewed and checked all information a nd data shown or indic ated on the
Contract Documents with respect to existing Underground Facilities at or contiguous to the site and
assumes responsibility for the accurate location of said Underground Facilities. No a dditional
examinations, investigations, explorations, test s, reports, studies or s imilar information or data in
respect of said Underground Facilities are or will be required by CONTRACTOR in order to perform
and furnish the Work at the Contract Price, within the Contract Time and in accordance with the other
terms and conditions of the Contract Documents.
6.4 CONTRACTOR has correla ted the results of all such observations, examinations, investigations,
explorations, tests, reports and studies with the terms and conditions of the Contract Documents.
6.5 CONTRACTOR has given ENGINEER written notice of all conflicts, error or discrepancies that he has
discovered in the Contract Documents and the written resolution thereof by ENGINEER is acceptable
to CONTRACTOR.
6.6 BUY AMERICAN - STEEL AND MA NUFACTURED PRODUCTS FO R CONSTRUCTION
CONTRACTS (JAN 1991)
(a) The Contractor agrees that only domestic steel and manufactured products will be used by
the Contractor, subcontractors, materialmen, and suppliers in the performance of this contract, a s
defined in (b) below.
(b) T he following terms apply to this clause:
1. Steel and Manufactured Products. As used in this clause, steel and manufactured
products include (1) those produced in the United States or (2) a m anufactured product
produced in the United States, if the cost of its components mined, produced or manufactured
in the United States exceeds 60 percent of the cost of all its components and final assembly
has taken place in the United States.
2. Components. As used in this clause, components means those articles, materials,
and supplies incorporated directly into steel and manufactured products.
3. Cost of Components. This means the costs for production of the components,
exclusive of final assembly labor costs.
(c) The attac hed li st (marked as Exhibit "A") i s the list of supp lies/materials that the U.S.
Government has determined that are not p roduced in the United States in sufficient and
reasonably available quantities and of sufficient quality that will take exception to this clause.
JASPER COUNTY
RIDGELAND-CLAUDE DEAN AIRPORT
AWOS III P/T PROJECT CONTRACT FORM
HOLT PROJECT No. SC1001-18 Page CF-5 of 6
Article 7. CONTRACT DOCUMENTS.
The Cont ract Documents which comprise the entire agreeme nt between OWNER and CONTRACTOR
concerning the Work consist of the following:
7.1 This Agreement (pages CF-1 to CF-6, inclusive).
7.2 Exhibit “A” – List of Supplies/Materials (pages XA-1 to XA-9)
7.3 Certificate of Secretary (page CS-1)
7.4 Performance and Payment Bonds, consisting of pages PB-1 to PB-4, inclusive.
7.5 General Provisions and Supplementary Conditions.
7.6 Technical Specifications as listed in table of contents of the Project Manual.
7.7 Drawings, consisting of a cover sheet and sheets numbered with each sheet bearing the following
general title:
RIDGELAND-CLAUDE DEAN AIRPORT
AWOS III P/T PROJECT
FAA A.I.P. No. 3-45-0048-016-2021
7.8 Addendum Number(s) 1, 2 & 3.
7.9 CONTRACTOR's Bid (pages BF-1 to BF-38).
7.10 The following which may be delivered or issued after the Effective Date of the Agreement and are not
attached hereto: All Written Amendments and other documents a mending, modifying, or
supplementing the Contract Documents pursuant to Section 40 of the General Provisions.
7.11 Attachment A: Schedule of Values (Reduced Scope of Work)
There are no Contract Documents other than those listed in this Article 7. The Contract Documents may only
be amended, modified or supplemented as provided in Section 40 of the General Provisions.
Article 8. MISCELLANEOUS.
8.1 Terms used in this Agreement which are defined in Section 10 of the General Provisions will have the
meanings indicated in the General Provisions.
8.2 No assignment by a party hereto of any ri ghts under or interests in the Contract Documents will be
binding on another party hereto without the written consent of the party sought to be bound; and
specifically but without limitation monies that may become due and monies that are due may not be
assigned without such consent (except to the extent that the effect of this restriction may be limited by
law), and unless specifically stated to the contrary in any written consent to an assig nment no
assignment will release or discharge the assignor from any duty or responsibility under the Contract
JASPER COUNTY
RIDGELAND-CLAUDE DEAN AIRPORT
AWOS III P/T PROJECT CONTRACT FORM
HOLT PROJECT No. SC1001-18 Page CF-6 of 6
Documents.
8.3 OWNER and CO NTRACTOR each binds itself, its partners, successors, assigns and legal
representatives to the other party hereto, its partners, successors, assigns and legal representatives in
respect of all covenants, agreements an d obligations contained in the Contract Documents. The
CONTRACTOR or his/her subcontractor(s) shall not discriminate on the basis of race, color,
national o rigin, or sex in performance of this Contract. The CONTRACTOR shall car ry out
applicable requirements of 49 CFR Part 26 in the award and a dministration of DOT/FAA assisted
contracts. Failure by the CONTRACTOR to carry out these requirements is a material breach of
this Contract, wh ich may re sult in the termination of th is Co ntract or such other remedy as the
OWNER deems appropriate.
8.4 The prime contractor agrees to pay each subcontractor under this prime contract for satisfactory
performance of its contract no later than seven (7) days from the receipt of each payment the prime
contractor receives from the Owner. The Owner shall hold ret ainage from prime contractors and
will allow prompt and regular incremental acceptances of portions of the prime contract and will pay
retainage to the prime contractor as a condi tion of these acceptances. The prime contractor, as a
matter of contractual obligation, shall agree to pay all retainage owed to each subcontractor within
seven (7) days for satisfactory comple tion of the accepted work af ter the Authority makes payment
to the prime contractor. Any delay or postponement of payment from the above referenced time
frame may occur only for good cause following written approval of the Owner. This clause applies
to both DBE and non-DBE subcontractors.
Article 9. OTHER PROVISIONS.
IN WITNESS WHEREOF, OWNER and CONTRACTOR have signed six copies of this Agreement.
Two counterparts each have been delivered to O WNER, and one counterpart each h as been
delivered to CONTRACTOR, STATE, FAA, and ENGINEER. All portions of the Contract Documents
have been signed or identified by OWNER and CONTRACTOR or by ENGINEER on their behalf.
This Agreement will be effective on ______________________________________________.
OWNER CONTRACTOR
JASPER COUNTY TRINITY ELECTRICAL SERVICES, INC.
RIDGELAND, SOUTH CAROLINA BAXLEY, GEORGIA
By: ____________________________ By: _________________________________
(Corporate Seal)
Attest: _________________________ Attest: ______________________________
Address for giving notices: Address for giving notices:
Post Office Box 1149 Trinity Electrical Services, Inc.
358 Third Avenue 2317 Golden Isles West
Ridgeland, South Carolina 29936 Baxley, Georgia 31513
EXHIBIT "A" - Nationwide Buy American Waivers Issued (as of June 13, 2023)
Waiver Type Mfr. Product Eff. Date
Type III Equipment/Building ADB Safegate Americas, LLC L-852T LED (L) Omni-directional In-pavement Taxiway Edge Light RSTEX1XP3NXNXXX2 3/25/2023
Type III Equipment/Building SPX Aids for Aviation L-863 Portable Runway and Taxiway Lighting AV-70-863-B-SW-CP 3/25/2023
Type III Equipment/Building SPX Aids to Aviation L-863 Portable Runway and Taxiway Lighting AC-70-863-B-RF-SW-CP 3/25/2023
Type III Equipment/Building All Weather Incorporated Automated Weather Observation System AWOS II 3/6/2023
Type III Equipment/Building All Weather Incorporated Automated Weather Observation System III P/T 2/25/2023
Type III Equipment/Building All Weather Incorporated Automated Weather Observation System III-P 2/25/2023
Type III Equipment/Building All Weather Incorportated Automated Weather Observation System AWOS I 2/25/2023
Type III Equipment/Building All Weather Incorportated Automated Weather Observation System Altimeter/Visibility (AV) 2/25/2023
Type III Equipment/Building All Weather Incorportated Automated Weather Observation System III 2/25/2023
Type III Equipment/Building Potters Industries (Flex-O-Lite) Reflective Media TTB 13215D Type IA (Flex-O-Lite) Glass Beads 8/27/2022
Type III Equipment/Building GBA Components, LLC Inpavement Light EB-83A Coated Bolts 8/7/2022
Type III Equipment/Building ADB Safegate Americas, LLC L-850D(L) RSRT212XXXFXXXX1 Inpavement Runway Threshold Light 7/30/2022
Type III Equipment/Building ADB Safegate Americas, LLC L-852A (LED) Model RSTA21XXXNXXX2X1 Inpavement Taxiway Centerline Light 7/17/2022
Type III Equipment/Building ADB Safegate Americas, LLC L-852B (LED) Model RSTB21XXXNXXX2X1 Inpavement Centerline Light 7/17/2022
Type III Equipment/Building ADB Safegate Americas, LLC L-852C (LED) Model RSTC21XXXNXXX2X1 Inpavement Taxiway Centerline Light 7/17/2022
Type III Equipment/Building ADB Safegate Americas, LLC L-852D (LED) Model RSTD21XXXNXXX2X1 Inpavement Centerline Light 7/17/2022
Type III Equipment/Building ADB Safegate Americas, LLC L-852J (LED) Model RSTJ21XXXCXXX2X1 Inpavement Taxiway Centerline Light 7/17/2022
Type III Equipment/Building ADB Safegate Americas, LLC L-852K(LED) Inpavement Taxiway Centerline Light Model RSTK21XXXCXXX2X1 7/17/2022
Type III Equipment/Building ADB Safegate Americas, LLC L-852S (LED) Model RSSB21XXXNRNX2X1 Inpavement Stop Bar Light 7/17/2022
Type III Equipment/Building FLash Technology L-880 (LED) Precision Approach Path Indicator 7/17/2022
Type III Equipment/Building Flash Technology Flash Technology L-881 (LED) Precision Approach Path Indicator 7/17/2022
Type III Equipment/Building Potters Industries (Flex-O-Lite) Reflective Media TT-B 1325D Type III (Flex-O-Lite) Glass Beads, 1.9 Index of Refraction 7/17/2022
Type III Equipment/Building ADB Safegate L-850A(L) RSRC11XXXNXXXXX1 Inpavement Runway Centerline Light 6/18/2022
Type III Equipment/Building ADB Safegate L-850B(L) RSRZ11XX1XWNXXX1 Inpavement Touchdown Zone Light 6/18/2022
Type III Equipment/Building ADB Safegate L-850C (L) RSRE11XXXCXXXXX1 Inpavement Runway Edge Light 6/18/2022
Type III Equipment/Building ADB Safegate L-850D(L) RSRN212XXXRXXXX1 Inpavement Runway End Light 6/18/2022
Type III Equipment/Building ADB Safegate L-850T(L) RSRS21XX1NRNRXX1 Runway Status Light 6/18/2022
Type III Equipment/Building Airport Lighting Company L-821 Airport Lighting Control Panel 2/26/2022
Type III Equipment/Building Airport Lighting Company L-880 LED Precision Approach Path Indicator 2/26/2022
Type III Equipment/Building Airport Lighting Company L-881 LED Abbreviated Precision Approach Path Indicator 2/26/2022
Type III Equipment/Building ADB Safegate High Intensity Runway Edge L-862(L) ERES2YW33S00002 11/27/2021
Type III Equipment/Building ADB Safegate High Intensity Runway Edge Light L-862(L) ERES2GR13SF0002 11/27/2021
Type III Equipment/Building ADB Safegate High Intensity Runway Edge Light L-862(L) ERES2WY33S00002 11/27/2021
Type III Equipment/Building Webasto Charging Systems Incorportated Posicharge DVS 300 Electric Vehicle Charger 11/27/2021
Type III Equipment/Building Multi-Electric Manufacturing LED E Runway Elevated Threshold End Light 9/18/2021
Type III Equipment/Building Multi-Electric Manufacturing LED Runway Elevated Edge - L-862 (L) 9/18/2021
Type III Equipment/Building Airport Lighting Company L-890 Lighting Control & Monitoring System 7/17/2021
Type III Equipment/Building Airport Lighting Company High Intensity Runway Edge Light, L-862 LED 5/8/2021
Type III Equipment/Building Airport Lighting Company L-861SE LED Medium Intensity Runway & Taxiway Edge Light 5/8/2021
Type III Equipment/Building Airport Lighting Company L-862 E LED HIgh Intensity Runway Threshold Light 5/8/2021
Type III Equipment/Building Hali-Brite Incorporated L-801 A (LED) Medium Intensity Beacon 4/24/2021
Type III Equipment/Building Hali-Brite Incorportated L-802 A (LED) High Intensity Beacon 4/24/2021
Type III Equipment/Building Musco Lighting TLC for LED® Light-Structure System™ Apron Flood Lighting 4/11/2021
Type III Equipment/Building Flight Light Inc. L-810 Obstruction Light Single Head LED 4/3/2021
Type III Equipment/Building Flight Light Inc. L-810 Obstuctruction Light Double Head LED 4/3/2021
Type III Equipment/Building Airport Lighting Company L-847 Switch, Circuit Selector 3/20/2021
Type III Equipment/Building ADB Safegate L-849 -L Runway End Identification Lights - E1101012 8/8/2020
Type III Equipment/Building Hali-Brite Incorporated L-893, Lighted Visual Aid to Indicate Temporary Runway Closure LED RCM-D L-893 (L) 4/26/2020
Type III Equipment/Building Hali-Brite incorporated L-893, Lighted Visual Aid to Indicate Temporary Runway Closure, LED RCM-D 4/26/2020
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2NG01S00000 4/11/2020
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2NG01S00100 4/11/2020
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2NG01SF0000 4/11/2020
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2NG02S00000 4/11/2020
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2NG0ASL0000 4/11/2020
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2NG0BSL0000 4/11/2020
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2NG0CSL0000 4/11/2020
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2NG0CSM0000 4/11/2020
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2RG01S00100 4/11/2020
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2RG01SF0000 4/11/2020
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2RG02S00000 4/11/2020
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2RG02S00100 4/11/2020
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2RG03S00000 4/11/2020
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2RG03S00100 4/11/2020
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2RG03SF0000 4/11/2020
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2RG03SF0100 4/11/2020
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2RG04S00000 4/11/2020
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2RG04S00100 4/11/2020
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2RG04SF0000 4/11/2020
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2RG04SF0100 4/11/2020
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2RG05S00000 4/11/2020
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2RG05SC0000 4/11/2020
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2RG05SC0100 4/11/2020
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2RG06SC0000 4/11/2020
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2RG07S00000 4/11/2020
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2RG07SC0000 4/11/2020
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2RG07SF0000 4/11/2020
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2RG09S00000 4/11/2020
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2RG0BSM0000 4/11/2020
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2RG0CSL0000 4/11/2020
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2RN09SL0000 4/11/2020
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2YG01S00100 4/11/2020
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2YR01S00100 4/11/2020
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2YR03S00100 4/11/2020
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2YY02S00100 4/11/2020
EXHIBIT "A" Page XA-1 of XA-9
EXHIBIT "A" - Nationwide Buy American Waivers Issued (as of June 13, 2023)
Waiver Type Mfr. Product Eff. Date
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS6WY09S00000 4/11/2020
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS8RG05SC0000 4/11/2020
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS8RN05SC0000 4/11/2020
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS8RR05S00000 4/11/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity ERES2RG28SF0002 4/11/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity ERES2RN01S00002 4/11/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity ERES2RR03S00102 4/11/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity ERES2RR35S00002 4/11/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity ERES2RR38S00002 4/11/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity ERES2RY28S00002 4/11/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity ERES2RY31S00002 4/11/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity ERES2RY33S00002 4/11/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity ERES2RY33S00102 4/11/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity ERES2RY35S00002 4/11/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity ERES2WW31S00002 4/11/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity ERES2WW31S00102 4/11/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity ERES2WW33S00002 4/11/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity ERES2WW33S00102 4/11/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity ERES2YG31SF0002 4/11/2020
Type III Equipment/Building ADb Safegate L-862 Lights, Runway Edge, High Intensity ERES2RR03S00002 4/11/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2GN05MI0002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2GN05SF0002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2GN05SF0102 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2GN09MI0002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2GN09MI002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2GN11SF0002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2GN15SF0002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2GR08SF0002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2GR11MF0102 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2GR11SF0002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2GR13MF0102 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2GR13SF0102 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2GR13SM0102 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2GR15MF0002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2GR15SF0002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2GR19SF0002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2GR25MF0002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2GR25SF0002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2GR29SF0002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2GW31SF0002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2GY33SF0102 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2GY35SF0002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2NG21SF0002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2NG23SF0102 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2NG25SF0002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2NG25SF0102 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2RG21MF0102 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2RG21SF0102 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2RG23MF0102 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2RG23SF0102 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2RG25SF0102 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2RG29SF0002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2RG31SF0002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2RN01M00002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2RN05S00002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2RN09M00002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2RR01S00002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2RR03S00102 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2RR15S00002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2RR25S00002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2RR31M00002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2RR31S00002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2RR35S00002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2RW31S00002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2RY23S00102 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2RY31M00002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2RY31S00002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2RY35S00002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2WG31SF0002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2WR31S00002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2WW31M00002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2WW31S00002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2WW31S00102 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2WW33M00102 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2WW33S00002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2WW33S00102 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2WW35M00002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2WW35S01102 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2WW39M00002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2WY31M00002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2WY31S00002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2WY31S00102 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2WY33M00102 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2WY33S00102 4/4/2020
EXHIBIT "A" Page XA-2 of XA-9
EXHIBIT "A" - Nationwide Buy American Waivers Issued (as of June 13, 2023)
Waiver Type Mfr. Product Eff. Date
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2WY39M00002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2WY39S00002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2YG33SF0102 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2YG35SF0002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2YR13S00102 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2YR31M00002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2YR31S00002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2YR35S00002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2YR39M00002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2YR39S00002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2YW31S00002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2YW33M00102 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2YW33S00102 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2YW35M00002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2YW39M00002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2YW39S00002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity ERES2GN05SI0002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity ERES2GN11SF0002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity ERES2GN13SF0002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity ERES2GN13SF0102 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity ERES2GN18SF0002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity ERES2GR05SI0002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity ERES2GR11SF0002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity ERES2GR11SF0102 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity ERES2GR12SF0002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity ERES2GR13SF0102 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity ERES2GR15SF0002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity ERES2GR18SF0002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity ERES2GY31SF0002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity ERES2GY33SF0002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity ERES2GY33SF0102 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity ERES2GY35SF0002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity ERES2NG21SF0002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity ERES2NG23SF0002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity ERES2NG23SF0102 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity ERES2NG28SF0002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity ERES2RG21SF0102 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity ERES2RG22SF0002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity ERES2RG23SF0002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity ERES2RG23SF0102 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity ERES2RG25SF0002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity ERES2RN05S00002 4/4/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity ERES2RR01S00002 4/4/2020
Type III Equipment/Building ADB Safegate L-862(L) High Intensity Runway Edge Light EREL2GN13SF0102 4/4/2020
Type III Equipment/Building ADB Safegate L 862 Lights, Runway Edge, High Intensity EREL2RG21SF0002 4/4/2020
Type III Equipment/Building ADB Safegate L 862 Lights, Runway Edge, High Intensity EREL2WW35S00002 4/4/2020
Type III Equipment/Building ADB Safegate L 862 Lights, Runway Edge, High Intensity EREL2WY35S00002 4/4/2020
Type III Equipment/Building ADB Safegate L 862 Lights, Runway Edge, High Intensity EREL2YW35S00002 4/4/2020
Type III Equipment/Building ADB Safegate L 862 Lights, Runway Edge, High Intensity ERES2RG21SF0002 4/4/2020
Type III Equipment/Building ADB safegate L-862 Lights, Runway Edge, High Intensity EREL2RG25SF0002 4/4/2020
Type III Equipment/Building ADB Safegate L-826 L L-862 Lights, Runway Edge, High Intensity EREL 24 IN N/G W/ARC 1.5 CPLG 12 FAA 3/15/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL 14 IN G/N N/ARC 2 CPLG 11.5 3/15/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL 14 IN G/N W/ARC 2 CPLG 11.5 3/15/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL 14 IN G/R W/ARC 2 CPLG 11.5 FAA 3/15/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL 24 IN G/N W/ARC 1.5 CPLG 12 3/15/2020
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL 24 IN G/Y W/ARC 1.5 CPLG 12 FAA 3/15/2020
Type III Equipment/Building Diamond Vogel Marking - 7503 Blue Waterborne Traffic Paint 2/17/2020
Type III Equipment/Building Diamond Vogel Marking - UC 1509 White Waterborne Traffic Paint 2/17/2020
Type III Equipment/Building Diamond Vogel Marking - UC 3584 Yellow Waterborne Traffic Paint 2/17/2020
Type III Equipment/Building Diamond Vogel Marking - UC 5503 Red Waterborne Traffic Paint 2/17/2020
Type III Equipment/Building Diamond Vogel Marking - UC 9507 Black Waterborne Traffic Paint 2/17/2020
Type III Equipment/Building Avlite Systems L-880 LED Precision Approach Path Indicator 1/24/2020
Type III Equipment/Building Avlite Systems L-881 LED Abbreviated Precision Approach Path Indicator 1/24/2020
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2WG04S00000 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2WG04S00100 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2WG07S00000 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2WR01S00000 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2WR01S00100 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2WR03S00000 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2WR03S00100 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2WR04S00000 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2WR07S00000 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2WW01S00000 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2WW01S00100 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2WW02S00000 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2WW02S00100 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2WW03S00000 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2WW03S00100 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2WW04S00000 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2WW04S00100 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2WW05S00000 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2WW05S00100 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2WW06S00000 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2WW07S00000 12/7/2019
EXHIBIT "A" Page XA-3 of XA-9
EXHIBIT "A" - Nationwide Buy American Waivers Issued (as of June 13, 2023)
Waiver Type Mfr. Product Eff. Date
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2WW09S00000 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2WW09SL0000 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2WW09SM0000 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2WW0ASL0000 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2WW0ASM0000 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2WW0BSL0000 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2WW0BSM0000 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2WW0CSL0000 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2WW0CSM0000 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2WY01S00000 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2WY01S00100 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2WY02S00000 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2WY02S00100 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2WY03S00000 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2WY03S00100 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2WY04S00000 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2WY04S00100 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2WY05S00000 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2WY05S00100 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2WY06S00000 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2WY07S00000 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2WY09S00000 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2YG01S00000 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2YG02S00000 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2YG03S00000 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2YG03S00100 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2YG04S00000 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2YG04S00100 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2YN03S00100 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2YR01S00000 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2YR03S00000 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2YR04S00000 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2YY01S00000 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2YY01S00100 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2YY03S00000 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2YY03S00100 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2YY04S00000 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2YY04S00100 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS6NG09S00000 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS6NR09S00000 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS6RG09S00000 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS6WW09S00000 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS8RR05SC0000 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS8WW05S00000 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS8WY05S00000 12/7/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2RG09SM0000 11/23/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2RN09SM0000 11/23/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2RN0ASL0000 11/23/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2RN0ASM0000 11/23/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2RN0BSL0000 11/23/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2RN0BSM0000 11/23/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2RN0CSL0000 11/23/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2RN0CSM0000 11/23/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2RR01S00000 11/23/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2RR01S00100 11/23/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2RR02S00000 11/23/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2RR03S00000 11/23/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2RR03S00100 11/23/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2RR04S00000 11/23/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2RR04S00100 11/23/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2RR07S00000 11/23/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2RR09S00000 11/23/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2RW09SL0000 11/23/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2RW09SM0000 11/23/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2RW0ASL0000 11/23/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2RW0ASM0000 11/23/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2RW0BSL0000 11/23/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2RW0BSM0000 11/23/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2RW0CSL0000 11/23/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2RW0CSM0000 11/23/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2WG01S00000 11/23/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2WG01S00100 11/23/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2WG03S00000 11/23/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2WG03S00100 11/23/2019
Type III Equipment/Building ADB Safegate L-861 Lights, Runway & Taxiway Edge, Medium Intensity EMIS2WR04S00100 11/23/2019
Type III Equipment/Building ADB Safegate L-861(L) Medium Intensity Runway Edge Light EMIS2NG03S00100 11/16/2019
Type III Equipment/Building ADB Safegate L-861(L) Medium Intensity Runway Edge Light EMIS2NG03S00000 11/16/2019
Type III Equipment/Building ADB Safegate L-861(L) Medium Intensity Runway Edge Light EMIS2NG03SF0000 11/16/2019
Type III Equipment/Building ADB Safegate L-861(L) Medium Intensity Runway Edge Light EMIS2NG04S00000 11/16/2019
Type III Equipment/Building ADB Safegate L-861(L) Medium Intensity Runway Edge Light EMIS2NG04S00100 11/16/2019
Type III Equipment/Building ADB Safegate L-861(L) Medium Intensity Runway Edge Light EMIS2NG07S00000 11/16/2019
Type III Equipment/Building ADB Safegate L-861(L) Medium Intensity Runway Edge Light EMIS2NG09SL0000 11/16/2019
Type III Equipment/Building ADB Safegate L-861(L) Medium Intensity Runway Edge Light EMIS2NG09SM0000 11/16/2019
Type III Equipment/Building ADB Safegate L-861(L) Medium Intensity Runway Edge Light EMIS2NR01S00000 11/16/2019
EXHIBIT "A" Page XA-4 of XA-9
EXHIBIT "A" - Nationwide Buy American Waivers Issued (as of June 13, 2023)
Waiver Type Mfr. Product Eff. Date
Type III Equipment/Building ADB Safegate L-861(L) Medium Intensity Runway Edge Light EMIS2NR01S00100 11/16/2019
Type III Equipment/Building ADB Safegate L-861(L) Medium Intensity Runway Edge Light EMIS2NR03S00000 11/16/2019
Type III Equipment/Building ADB Safegate L-861(L) Medium Intensity Runway Edge Light EMIS2NR03S00100 11/16/2019
Type III Equipment/Building ADB Safegate L-861(L) Medium Intensity Runway Edge Light EMIS2NR04S00000 11/16/2019
Type III Equipment/Building ADB Safegate L-861(L) Medium Intensity Runway Edge Light EMIS2NR04S00100 11/16/2019
Type III Equipment/Building ADB Safegate L-861(L) Medium Intensity Runway Edge Light EMIS2RG0ASL0000 11/16/2019
Type III Equipment/Building ADB Safegate L-861(L) Medium Intensity Runway Edge Light EMIS2RG0ASM0000 11/16/2019
Type III Equipment/Building ADB Safegate L-861(L) Medium Intensity Runway Edge Light EMIS2RG0BSL0000 11/16/2019
Type III Equipment/Building ADB Safegate L-861(L) Medium Intensity Runway Edge Light EMIS2RG0CSM0000 11/16/2019
Type III Equipment/Building Vaisala In-Pavement Stationary Runway Weather Information System RWS200 11/16/2019
Type III Equipment/Building Astronics DME L-852S Inpavement Taxiway Lights L-R-1-0 10/26/2019
Type III Equipment/Building Astronics DME L-852T-L 1 G2 Inpavement Taxiway Lights 10/26/2019
Type III Equipment/Building Astronics DME L-852X Inpavement Taxiway Lights L-G2 10/26/2019
Type III Equipment/Building Astronics DME L-852X-L G2 Inpavement Taxiway Lights 10/26/2019
Type III Equipment/Building Astronics DME L-862L HIgh Intensity runway Edge Lights 10/26/2019
Type III Equipment/Building Franklin Paint Company P-620 Black Waterborne Traffic Paint 10/26/2019
Type III Equipment/Building Franklin Paint Company P-620 Green Waterborne Traffic Paint 10/26/2019
Type III Equipment/Building Franklin Paint Company P-620 Red Waterborne Traffic Paint 10/26/2019
Type III Equipment/Building Franklin Paint Company P-620 White Waterborne Traffic Paint 10/26/2019
Type III Equipment/Building Franklin Paint Company P-620 Yellow Waterborne Traffic Paint 10/26/2019
Type III Equipment/Building Millerbernd Manufacturing Company L-867 Light Base, Non-Load Bearing 10/26/2019
Type III Equipment/Building Millerbernd Manufacturing Company L-868 Light Base, Load Bearing 10/26/2019
Type III Equipment/Building Millerbernd Manufacturing Company L-894 Elevated Light Cover 12" 10/26/2019
Type III Equipment/Building Millerbernd Manufacturing Company L-894 Elevated Light Cover 16" 10/26/2019
Type III Equipment/Building Wix Support Equipment Electric Vehicle Charging Station Cable Mangement System 10/26/2019
Type III Equipment/Building ADB Safegate L-862 (L) High Intensity Runway Edge Light EREL2GN13SF0102 10/19/2019
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2GN13SF0102 10/19/2019
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2GN15SF0002 10/19/2019
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2GN15SF0102 10/19/2019
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2GR15SF0102 10/19/2019
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2GY33SF0102 10/19/2019
Type III Equipment/Building ADB Safegate L-862 Lights, Runway Edge, High Intensity EREL2NG23SF0102 10/19/2019
Type III Equipment/Building ADB Safegate L-861 L Runway & Taxiway Edge Medium Intensity Lights 10/1/2019
Type III Equipment/Building ADB Safegate L-862 E L Runway Edge High Intensity Lights ERES2WW35S00002 10/1/2019
Type III Equipment/Building ADB Safegate L-862 Runway Edge High Intensity Lights EREL2RG21SF0002 10/1/2019
Type III Equipment/Building ADB Safegate L-862 Runway Edge High Intensity Lights EREL2WW35S00002 10/1/2019
Type III Equipment/Building Minit charger, LLC ALT22-480-1 Altus 22kW Dual Port Charger with BIW Cables 10/1/2019
Type III Equipment/Building Multi-Electric Mfg., Inc. L-852 E LED Inpavement Taxiway Light 10/22/2018
Type III Equipment/Building Multi-Electric Mfg., Inc. L-852 F LED Inpavement Taxiway Light 10/22/2018
Type III Equipment/Building Multi-Electric Mfg., Inc. L-852 S LED Inpavement Taxiway Light 10/22/2018
Type III Equipment/Building Multi-Electric Mfg., Inc. L-852 T LED Inpavement Taxiway Light 10/22/2018
Type III Equipment/Building Astronics DME Corporation L-804 V Holding Poisition Edge Light 8/27/2018
Type III Equipment/Building Astronics DME Corporation L-829 Monitored Constant Current Regulator 8/27/2018
Type III Equipment/Building Astronics DME Corporation L-849 I LED Runway End Indentification Lights 8/27/2018
Type III Equipment/Building Astronics DME Corporation L-850 A LED Runway Inpavement Lights 8/27/2018
Type III Equipment/Building Astronics DME Corporation L-850 B LED Runway Inpavement Lights 8/27/2018
Type III Equipment/Building Astronics DME Corporation L-850 T Runway Inpavement Light 8/27/2018
Type III Equipment/Building Astronics DME Corporation L-858 Runway and Taxiway Signs 8/27/2018
Type III Equipment/Building Kodiack America, LLC Snow Removal Equipment - Dual Engine Chassis w/ Rwy Broom & Air Blast 8/27/2018
Type III Equipment/Building Multi-Electric Mfg., Inc. L-850 A LED Inpavement Runway Light 8/27/2018
Type III Equipment/Building Multi-Electric Mfg., Inc. L-850 B LED Inpavement Runway Light 8/27/2018
Type III Equipment/Building Multi-Electric Mfg., Inc. L-850 C LED Inpavement Runway Light 8/27/2018
Type III Equipment/Building Multi-Electric Mfg., Inc. L-850 D LED Inpavement Runway Light 8/27/2018
Type III Equipment/Building Multi-Electric Mfg., Inc. L-850 E LED Inpavement Runway Light 8/27/2018
Type III Equipment/Building Multi-Electric Mfg., Inc. L-850 T LED Inpavement Runway Light 8/27/2018
Type III Equipment/Building Ennis-Flint Company P-620 AirMark Preformed Thermoplastic Pavement Markings 8/4/2018
Type III Equipment/Building Multi-Electric Mfg., Inc. L-852 A LED Inpavement Taxiway Light 7/29/2018
Type III Equipment/Building Multi-Electric Mfg., Inc. L-852 B LED Inpavement Taxiay Light 7/29/2018
Type III Equipment/Building Multi-Electric Mfg., Inc. L-852 C LED Inpavement Taxiway Light 7/29/2018
Type III Equipment/Building Multi-Electric Mfg., Inc. L-852 D LED Inpavement Taxiway Light 7/29/2018
Type III Equipment/Building Multi-Electric Mfg., Inc. L-852 J LED Inpavement Taxiway Light 7/29/2018
Type III Equipment/Building Multi-Electric Mfg., Inc. L-852 K LED Inpavement Taxiway Light 7/29/2018
Type III Equipment/Building Airport Lighting Company L-828 Constant Current Regulator 7/24/2018
Type III Equipment/Building Airport Lighting Company L-829 Monitored Constant Current Regulator 7/24/2018
Type III Equipment/Building Eaton Crouse-Hinds L-852 G LED Inpavement Taxiaway Light 7/22/2018
Type III Equipment/Building Hughey & Phillips L-810 Low Intensity LED , Double, VAC 1/21/2017
Type III Equipment/Building Hughey & Phillips L-810 Low Intensity LED, Single, VAC 1/21/2017
Type III Equipment/Building Astronics DME Corporation L-858 B LED Runway Runway & Taxiway Signs 10/17/2016
Type III Equipment/Building Astronics DME Corporation L-858 L LED Runway & Taxiway Signs 10/17/2016
Type III Equipment/Building Astronics DME Corporation L-858 R LED Runway & Taxiway Signs 10/17/2016
Type III Equipment/Building Eaton Crouse-Hinds L-850 C Runway Inpavement Lights 10/10/2016
Type III Equipment/Building Vaisala AW20, AWOS III 8/1/2016
Type III Equipment/Building Vaisala AW20-SPLIT, AWOS A 8/1/2016
Type III Equipment/Building Vaisala AW20-SPLIT, AWOS AV 8/1/2016
Type III Equipment/Building Vaisala AW20-SPLIT, AWOS I 8/1/2016
Type III Equipment/Building Vaisala AW20-SPLIT, AWOS II 8/1/2016
Type III Equipment/Building Vaisala AW20-SPLIT, AWOS III 8/1/2016
Type III Equipment/Building Vaisala AW20-SPLIT, AWOS IIIP 8/1/2016
Type III Equipment/Building Vaisala AW20-SPLIT, AWOS IIIPT 8/1/2016
Type III Equipment/Building Vaisala AW20-SPLIT, AWOS IIIT 8/1/2016
Type III Equipment/Building Vaisala AW20-SPLIT, AWOS IV Z 8/1/2016
Type III Equipment/Building Vaisala AW20-STA, AWOS A 8/1/2016
Type III Equipment/Building Vaisala AW20-STA, AWOS AV 8/1/2016
Type III Equipment/Building Vaisala AW20-STA, AWOS II 8/1/2016
EXHIBIT "A" Page XA-5 of XA-9
EXHIBIT "A" - Nationwide Buy American Waivers Issued (as of June 13, 2023)
Waiver Type Mfr. Product Eff. Date
Type III Equipment/Building Vaisala AW20-STA, AWOS IIIP 8/1/2016
Type III Equipment/Building Vaisala AW20-STA, AWOS IIIPT 8/1/2016
Type III Equipment/Building Vaisala AW20-STA, AWOS IIIT 8/1/2016
Type III Equipment/Building Vaisala AW20-STA, AWOS IV Z 8/1/2016
Type III Equipment/Building Vaisala AW20-STA, AWS I 8/1/2016
Type III Equipment/Building Jaquith Industries L-894 12" Elevated Light Cover Baseplate 5/17/2016
Type III Equipment/Building Jaquith Industries L-894 16" Elevated Light Cover Baseplate 5/17/2016
Type III Equipment/Building Jaquith Industries L-895 Light Mounting Stake 5/17/2016
Type III Equipment/Building The Sherwin-Williams Company P-620, 1952, TT-P-Hotline Waterborne Durable Type III - White Marking Paint TM2452 5/14/2016
Type III Equipment/Building The Sherwin-Williams Company P-620, 1952, TT-P-Hotline Waterborne Durable Type III - Yellow Marking Paint TM2453 5/14/2016
Type III Equipment/Building The Sherwin-Williams Company P-620, TT-P- 1952, Hotline Waterborne Type I/II - Yellow Marking Paint TM2259 5/14/2016
Type III Equipment/Building The Sherwin-Williams Company P-620, TT-P-1952 Hotline Waterborne Type I/II w Algaecide, Fungicide, & Rust Inhibitor - Red Marking Paint TM2544 5/14/2016
Type III Equipment/Building The Sherwin-Williams Company P-620, TT-P-1952 Hotline Waterborne Type I/II - White Marking Paint TM2152 5/14/2016
Type III Equipment/Building The Sherwin-Williams Company P-620, TT-P-1952 Hotline Waterborne Type III w Algaecide, Fungicide, & Rust Inhibitor - White Marking Paint TM2564 5/14/2016
Type III Equipment/Building The Sherwin-Williams Company P-620, TT-P-1952, Hotline Waterborne Durable Type III - Black Marking Paint TM2140 5/14/2016
Type III Equipment/Building The Sherwin-Williams Company P-620, TT-P-1952, Hotline Waterborne Durable Type III - Blue Marking Paint TM2142 5/14/2016
Type III Equipment/Building The Sherwin-Williams Company P-620, TT-P-1952, Hotline Waterborne Durable Type III - Green Marking Paint TM2143 5/14/2016
Type III Equipment/Building The Sherwin-Williams Company P-620, TT-P-1952, Hotline Waterborne Durable Type III - Red Marking Paint TM2141 5/14/2016
Type III Equipment/Building The Sherwin-Williams Company P-620, TT-P-1952, Hotline Waterborne Type I/II - Black Marking Paint TM2221 5/14/2016
Type III Equipment/Building The Sherwin-Williams Company P-620, TT-P-1952, Hotline Waterborne Type I/II - Blue Marking Paint TM2224 5/14/2016
Type III Equipment/Building The Sherwin-Williams Company P-620, TT-P-1952, Hotline Waterborne Type I/II - Green Marking Paint TM2226 5/14/2016
Type III Equipment/Building The Sherwin-Williams Company P-620, TT-P-1952, Hotline Waterborne Type I/II - Red Marking Paint TM2222 5/14/2016
Type III Equipment/Building The Sherwin-Williams Company P-620, TT-P-1952, Hotline Waterborne Type I/II - Yellow Marking Paint TM2153 5/14/2016
Type III Equipment/Building The Sherwin-Williams Company P-620, TT-P-1952, Hotline Waterborne Type I/II w Algaecide, Fungicide, & Rust Inhibitor - Black Marking Paint TM2543 5/14/2016
Type III Equipment/Building The Sherwin-Williams Company P-620, TT-P-1952, Hotline Waterborne Type III w Algaecide, Fungicide, & Rust Inhibitor - Blue Marking Paint TM2545 5/14/2016
Type III Equipment/Building The Sherwin-Williams Company P-620, TT-P-1952, Hotline Waterborne Type III w Algaecide, Fungicide, & Rust Inhibitor - Yellow Marking Paint TM2565 5/14/2016
Type III Equipment/Building The Sherwin-Williams Company P-620, TT-P-1952, Hotline Waterborne, Type I/II - White Marking Paint TM2248 5/14/2016
Type III Equipment/Building The Sherwin-Williams Company P-620, TT-P-1952, Type III w Agaecide & Rust Inihibitor - Black Marking Paint TM2540 5/14/2016
Type III Equipment/Building The Sherwin-Williams Company P-620, TT-P-1952, Type III w Algaecide, Fungicide & Rust Inhibitor - White Marking Paint TM2538 5/14/2016
Type III Equipment/Building The Sherwin-Williams Company P-620, TT-P-1952, Type III w Algaecide, Fungicide, & Rust Inihibitor - Yellow Marking Paint TM2539 5/14/2016
Type III Equipment/Building Boshchung America, LLC Airport Winter Safety and Operations, RWIS 1/2/2016
Type III Equipment/Building Astronics DME Corporation L-804 Holding Position Edge Light 8/4/2015
Type III Equipment/Building ADB Safegate L-806 LED, Wind Cones-Frangible 5/15/2015
Type III Equipment/Building ADB Safegate L-806 Wind Cones - Frangible 5/15/2015
Type III Equipment/Building ADB Safegate L-850 D, Incandescent Inpavement Lights 5/15/2015
Type III Equipment/Building ADB Safegate L-850 E, Incandescent Inpavement Lights 5/15/2015
Type III Equipment/Building ADB Safegate L-850 F, Incandescent Inpavement Lights 5/15/2015
Type III Equipment/Building ADB Safegate L-861 E, LED Runway Edge, Medium Intensity Lights 5/15/2015
Type III Equipment/Building ADB Safegate L-861 LED, Medium Intensity Runway Edge Lights 5/15/2015
Type III Equipment/Building ADB Safegate L-804 LED, Holding Position Edge Light 5/5/2015
Type III Equipment/Building ADB Safegate L-810 LED, Obstruction Lights 5/5/2015
Type III Equipment/Building ADB Safegate L-849 C, LED, Runway End Identification Lights 5/5/2015
Type III Equipment/Building ADB Safegate L-849 E, LED, Runway End Identification Lights 5/5/2015
Type III Equipment/Building ADB Safegate L-850 A, Q/I, Runway, Inpavement Lights 5/5/2015
Type III Equipment/Building ADB Safegate L-850 B, Q/I Runway, Inpavement Lights 5/5/2015
Type III Equipment/Building ADB Safegate L-850 C LED, Runway, Inpavement Lights 5/5/2015
Type III Equipment/Building ADB Safegate L-850 C, Q/I Runway, Inpavement Lights 5/5/2015
Type III Equipment/Building ADB Safegate L-850 D, LED Runway, Inpavement Lights 5/5/2015
Type III Equipment/Building ADB Safegate L-852 A, LED, Taxiway, Inpavement Lights 5/5/2015
Type III Equipment/Building ADB Safegate L-852 A, Q, Taxiway, Inpavement Lights 5/5/2015
Type III Equipment/Building ADB Safegate L-852 B, LED Taxiway, Inpavement Lights 5/5/2015
Type III Equipment/Building ADB Safegate L-852 B, Q, Taxiway, Inpavement Lights 5/5/2015
Type III Equipment/Building ADB Safegate L-852 C, LED Taxiway, Inpavement Lights 5/5/2015
Type III Equipment/Building ADB Safegate L-852 C, Q, Taxiway, Inpavement Lights 5/5/2015
Type III Equipment/Building ADB Safegate L-852 D, LED Taxiway, Inpavement Lights 5/5/2015
Type III Equipment/Building ADB Safegate L-852 D, Q, Taxiway, Inpavement Lights 5/5/2015
Type III Equipment/Building ADB Safegate L-852 E, Q, Taxiway, Inpavement Lights 5/5/2015
Type III Equipment/Building ADB Safegate L-852 G, LED, Taxiway, Inpavement Lights 5/5/2015
Type III Equipment/Building ADB Safegate L-852 G, Q, Taxiway, Inpavement Lights 5/5/2015
Type III Equipment/Building ADB Safegate L-852 J, LED Taxiway, Inpavement Lights 5/5/2015
Type III Equipment/Building ADB Safegate L-852 S, Q, Taxiway, Inpavement Lights 5/5/2015
Type III Equipment/Building ADB Safegate L-852 T, LED Taxiway, Inpavement Lights 5/5/2015
Type III Equipment/Building ADB Safegate L-858, LED, Runway and Taxiway Signs 5/5/2015
Type III Equipment/Building ADB Safegate L-861 SE, Q, Runway Edge, Medium Intensity Lights 5/5/2015
Type III Equipment/Building ADB Safegate L-861 T, LED Taxiway Edge, Medium Intensity Lights 5/5/2015
Type III Equipment/Building ADB Safegate L-861, Q, Runway Edge, Medium Intensity Lights 5/5/2015
Type III Equipment/Building ADB Safegate L-861E, Q, Runway Edge, Medium Intensity Lights 5/5/2015
Type III Equipment/Building ADB Safegate L-862 E, Q, Runway Edge, High Intensity Lights 5/5/2015
Type III Equipment/Building ADB Safegate L-862, Q, Runway Edge, High Intensity Lights 5/5/2015
Type III Equipment/Building ADB Safegate L-880 LED, Precision Approach Path Indicator 5/5/2015
Type III Equipment/Building ADB Safegate L-881 LED, Abbreviated Precision Approach Path Indicator 5/5/2015
Type III Equipment/Building Atg Airports, Ltd. L-850 B Runway Inpavement Lights 2/2/2015
Type III Equipment/Building Atg Airports, Ltd. L-850 A Runway Inpavement Lights 1/20/2015
Type III Equipment/Building Atg Airports, Ltd. L-850 C Runway Inpavement Lights 1/17/2015
Type III Equipment/Building Astronics DME Corporation L-849 A LED Runway End Identification Lights 10/27/2014
Type III Equipment/Building Rheinmetall Defence DEBRA FOD 10/21/2014
Type III Equipment/Building Ennis-Flint Company A-A-2886B Black Runway Marking Paint 8/16/2014
Type III Equipment/Building Ennis-Flint Company A-A-2886B Blue Runway Marking Paint 8/16/2014
Type III Equipment/Building Ennis-Flint Company A-A-2886B Red Runway Marking Paint 8/16/2014
Type III Equipment/Building Ennis-Flint Company A-A-2886B White Runway Marking Paint 8/16/2014
Type III Equipment/Building Ennis-Flint Company A-A-2886B Yellow Runway Marking Paint 8/16/2014
Type III Equipment/Building Ennis-Flint Company TT-P-1952E Black Type I/II Fast Dry Runway Marking Paint 8/16/2014
Type III Equipment/Building Ennis-Flint Company TT-P-1952E Black Type III Runway Marking Paint 8/16/2014
Type III Equipment/Building Ennis-Flint Company TT-P-1952E Blue Type I/II Fast Dry Runway Marking Paint 8/16/2014
EXHIBIT "A" Page XA-6 of XA-9
EXHIBIT "A" - Nationwide Buy American Waivers Issued (as of June 13, 2023)
Waiver Type Mfr. Product Eff. Date
Type III Equipment/Building Ennis-Flint Company TT-P-1952E Blue Type III Runway Marking Paint 8/16/2014
Type III Equipment/Building Ennis-Flint Company TT-P-1952E Green Type I/II Fast Dry Runway Marking Paint 8/16/2014
Type III Equipment/Building Ennis-Flint Company TT-P-1952E Green Type III Runway Marking Paint 8/16/2014
Type III Equipment/Building Ennis-Flint Company TT-P-1952E Red Type I/II Fast Dry Runway Marking Paint 8/16/2014
Type III Equipment/Building Ennis-Flint Company TT-P-1952E Red Type III Runway Marking Paint 8/16/2014
Type III Equipment/Building Ennis-Flint Company TT-P-1952E White Type I/II Fast Dry Runway Marking Paint 8/16/2014
Type III Equipment/Building Ennis-Flint Company TT-P-1952E White Type III Runway Marking Paint 8/16/2014
Type III Equipment/Building Ennis-Flint Company TT-P-1952E Yellow Type I/II Fast Dry Runway Marking Paint 8/16/2014
Type III Equipment/Building Ennis-Flint Company TT-P-1952E Yellow Type III Runway Marking Paint 8/16/2014
Type III Equipment/Building Manairco L-861 T LED Runway & Taxiway Edge, Medium Intensity Lights 6/27/2014
Type III Equipment/Building Eaton Crouse-Hinds L-850 A LED Runway Inpavement Lights 6/16/2014
Type III Equipment/Building Eaton Crouse-Hinds L-850 B LED Runway Inpavement Lights 6/16/2014
Type III Equipment/Building Containment Solutions CSI Tank 10 - 10,000 Gallon Tank DWT Fuel Storage Tank 5/13/2014
Type III Equipment/Building Containment Solutions CSI Tank 10 - 12,000 Gallon Tank DWT Fuel Storage Tank 5/13/2014
Type III Equipment/Building Containment Solutions CSI Tank 10 - 15,000 Gallon Tank DWT Fuel Storage Tank 5/13/2014
Type III Equipment/Building Containment Solutions CSI Tank 10 - 2,000 Gallon DWT Fuel Storage Tank 5/13/2014
Type III Equipment/Building Containment Solutions CSI Tank 10 - 20,000 Gallon Tank DWT Fuel Storage Tank 5/13/2014
Type III Equipment/Building Containment Solutions CSI Tank 10 - 25,000 Gallon Tank DWT Fuel Storage Tank 5/13/2014
Type III Equipment/Building Containment Solutions CSI Tank 10 - 30,000 Gallon Tank DWT Fuel Storage Tank 5/13/2014
Type III Equipment/Building Containment Solutions CSI Tank 10 - 35,000 Gallon DWT Fuel Storage Tank 5/13/2014
Type III Equipment/Building Containment Solutions CSI Tank 4 - 1,000 Gallon DWT Fuel Storage Tank 5/13/2014
Type III Equipment/Building Containment Solutions CSI Tank 4 - 600 Gallon DWT Fuel Storage Tank 5/13/2014
Type III Equipment/Building Containment Solutions CSI Tank 6 - 4,000 Gallon DWT Fuel Storage Tank 5/13/2014
Type III Equipment/Building Containment Solutions CSI Tank 6 - 2,500 Gallon DWT Fuel Storage Tank 5/13/2014
Type III Equipment/Building Containment Solutions CSI Tank 6 - 3,000 Gallon DWT Fuel Storage Tank 5/13/2014
Type III Equipment/Building Containment Solutions CSI Tank 6 - 5,000 Gallon DWT Fuel Storage Tank 5/13/2014
Type III Equipment/Building Containment Solutions CSI Tank 6 - 6,000 Gallon DWT Fuel Storage Tank 5/13/2014
Type III Equipment/Building Containment Solutions CSI Tank 8 - 12,000 Gallon Tank DWT Fuel Storage Tank 5/13/2014
Type III Equipment/Building Containment Solutions CSI Tank 8 - 8,000 Gallon DWT Fuel Storage Tank 5/13/2014
Type III Equipment/Building Containment Solutions CSI Tank 8 -15,000 Gallon Tank DWT Fuel Storage Tank 5/13/2014
Type III Equipment/Building Containment Solutions CSI Tank 8 -5,000 Gallon DWT Fuel Storage Tank 5/13/2014
Type III Equipment/Building Service Wire Company L-824, Underground Electrical Cables for Airfield Circuits 5/4/2014
Type III Equipment/Building Airport Lighting Company L-861 LED Runway & Taxiway Edge, Medium Intensity Lights 3/29/2014
Type III Equipment/Building Davies Imperial Coatings, Inc. A-A-2886B Black Runway Marking Paint (5385) 3/24/2014
Type III Equipment/Building Eaton Crouse-Hinds L-852 A LED Taxiway Inpavement Lights 2/25/2014
Type III Equipment/Building Eaton Crouse-Hinds L-852 B LED Taxiway Inpavement Lights 2/25/2014
Type III Equipment/Building Eaton Crouse-Hinds L-852 C LED Taxiway Inpavement Lights 2/25/2014
Type III Equipment/Building Eaton Crouse-Hinds L-852 D LED Taxiway Inpavement Lights 2/25/2014
Type III Equipment/Building Eaton Crouse-Hinds L-852 J LED Taxiway Inpavement Lights 2/25/2014
Type III Equipment/Building Eaton Crouse-Hinds L-852 K LED Taxiway Inpavement Lights 2/25/2014
Type III Equipment/Building Astronics DME Corporation L-852 B LED Taxiway, Inpavement Lights 11/16/2013
Type III Equipment/Building Astronics DME Corporation L-852 C LED Taxiway, Inpavement Lights 11/16/2013
Type III Equipment/Building Astronics DME Corporation L-861 E LED Runway & Taxiway Edge, Medium Intensity Lights 11/16/2013
Type III Equipment/Building Astronics DME Corporation L-861 SE LED Runway & Taxiway Edge, Medium Intensity Lights 11/16/2013
Type III Equipment/Building Davies Imperial Coatings, Inc. A-A-2886B Black Runway Marking Paint (5383) 10/19/2013
Type III Equipment/Building Davies Imperial Coatings, Inc. A-A-2886B Blue Runway Marking Paint (5274) 10/19/2013
Type III Equipment/Building Davies Imperial Coatings, Inc. A-A-2886B Blue Runway Marking Paint (5344) 10/19/2013
Type III Equipment/Building Davies Imperial Coatings, Inc. A-A-2886B Blue Runway Marking Paint (5384) 10/19/2013
Type III Equipment/Building Davies Imperial Coatings, Inc. A-A-2886B Green Runway Marking Paint (5376) 10/19/2013
Type III Equipment/Building Davies Imperial Coatings, Inc. A-A-2886B Green Runway Marking Paint (5386) 10/19/2013
Type III Equipment/Building Davies Imperial Coatings, Inc. A-A-2886B Red Runway Marking Paint (5345) 10/19/2013
Type III Equipment/Building Davies Imperial Coatings, Inc. A-A-2886B Red Runway Marking Paint (5375) 10/19/2013
Type III Equipment/Building Davies Imperial Coatings, Inc. A-A-2886B White Runway Marking Paint (5281) 10/19/2013
Type III Equipment/Building Davies Imperial Coatings, Inc. A-A-2886B Yellow Runway Marking Paint (5342) 10/19/2013
Type III Equipment/Building Davies Imperial Coatings, Inc. A-A-2886B Yellow Runway Marking Paint (5372) 10/19/2013
Type III Equipment/Building Davies Imperial Coatings, Inc. A-A-2886B Yellow Runway Marking Paint (5382) 10/19/2013
Type III Equipment/Building Davies Imperial Coatings, Inc. IL SPEC Red Runway Marking Paint (5408) 10/19/2013
Type III Equipment/Building Davies Imperial Coatings, Inc. IL SPEC Yellow Runway Marking Paint (4636) 10/19/2013
Type III Equipment/Building Davies Imperial Coatings, Inc. TT-P-1952E Type II Blue Runway Marking Paint (4834) 10/19/2013
Type III Equipment/Building Davies Imperial Coatings, Inc. TT-P-1952E Type II Green Runway Marking Paint (5192) 10/19/2013
Type III Equipment/Building Davies Imperial Coatings, Inc. TT-P-1952E Type II Red Runway Marking Paint (4836) 10/19/2013
Type III Equipment/Building Davies Imperial Coatings, Inc. TT-P-1952E Type II Yellow Runway Marking Paint (4477) 10/19/2013
Type III Equipment/Building Davies Imperial Coatings, Inc. TT-P-1952E Type II Yellow Runway Marking Paint (8511) 10/19/2013
Type III Equipment/Building Davies Imperial Coatings, Inc. TT-P-1952E Type II Yellow Runway Marking Paint (9511) 10/19/2013
Type III Equipment/Building Davies Imperial Coatings, Inc. TT-P-1952E Type III Blue Runway Marking Paint (5433) 10/19/2013
Type III Equipment/Building Davies Imperial Coatings, Inc. TT-P-1952E Type III Green Runway Marking Paint (5435) 10/19/2013
Type III Equipment/Building Davies Imperial Coatings, Inc. TT-P-1952E Type III Red Runway Marking Paint (5434) 10/19/2013
Type III Equipment/Building Davies Imperial Coatings, Inc. TT-P-1952E Type III Yellow Runway Marking Paint (5431) 10/19/2013
Type III Equipment/Building Airport Lighting Company L-804, Holding Position Edge Light 9/21/2013
Type III Equipment/Building Honeywell Airport Systems L-828 F20 Constant Current Regulator 9/21/2013
Type III Equipment/Building Honeywell Airport Systems L-828 W10 Constant Current Regulator 9/21/2013
Type III Equipment/Building Honeywell Airport Systems L-829 S04 Constant Current Regulator with Monitor 9/21/2013
Type III Equipment/Building Honeywell Airport Systems L-829-F04, Constant Current Regulator 9/9/2013
Type III Equipment/Building Honeywell Airport Systems L-829-F30, Constant Current Regulator 9/9/2013
Type III Equipment/Building Honeywell Airport Systems L-829-F70, Constant Current Regulator 9/9/2013
Type III Equipment/Building Honeywell Airport Systems L-829-S30, Constant Current Regulator 9/9/2013
Type III Equipment/Building Honeywell Airport Systems L-829-S70, Constant Current Regulator 9/9/2013
Type III Equipment/Building Amerace - Thomas & Betts Corporation L-830-16 Isolation Transformer, 60Hz, 10/15 Watts, 6.6/6.6 Amperes 7/9/2013
Type III Equipment/Building Amerace - Thomas & Betts Corporation L-830-17 Isolation Transformer, 60Hz, 20/25 Watts, 6.6A/6.6A Amperes 7/9/2013
Type III Equipment/Building Astronics DME Corporation L-852 D LED Taxiway, Inpavement Lights 7/7/2013
Type III Equipment/Building Astronics DME Corporation L-852 A LED Taxiway, Inpavement Lights 3/26/2013
Type III Equipment/Building Astronics DME Corporation L-861 E Halogen Edge Light 3/26/2013
Type III Equipment/Building Astronics DME Corporation L-861 Halogen Lights 3/26/2013
Type III Equipment/Building Astronics DME Corporation L-861 LED Runway & Taxiway Edge, Medium Intensity Lights 3/26/2013
EXHIBIT "A" Page XA-7 of XA-9
EXHIBIT "A" - Nationwide Buy American Waivers Issued (as of June 13, 2023)
Waiver Type Mfr. Product Eff. Date
Type III Equipment/Building Astronics DME Corporation L-861 T - Halogen Taxiway Light 3/26/2013
Type III Equipment/Building Astronics DME Corporation L-861 T LED Runway & Taxiway Edge, Medium Intensity Lights 3/26/2013
Type III Equipment/Building Point Light Corporation L-861 E LED Runway & Taxiway Edge, Medium Intensity Lights 3/26/2013
Type III Equipment/Building Point Light Corporation L-861 SE LED Runway & Taxiway Edge, Medium Intensity Lights 3/26/2013
Type III Equipment/Building Point Light Corporation L-861 T LED Runway & Taxiway Edge, Medium Intensity Lights 3/26/2013
Type III Equipment/Building Point Light Corporation L-862 E LED Runway & Taxiway Edge, Medium Intensity Lights 3/26/2013
Type III Equipment/Building Advanced Drainage Systems (ADS) D-705 10" Pipe Underdrain w/sock 3/10/2013
Type III Equipment/Building Advanced Drainage Systems (ADS) D-705 4" Pipe Underdrain w/sock 3/10/2013
Type III Equipment/Building Advanced Drainage Systems (ADS) D-705 6" Pipe Underdrain w/sock 3/10/2013
Type III Equipment/Building Advanced Drainage Systems (ADS) D-705 8" Pipe Underdrain w/sock 3/10/2013
Type III Equipment/Building DME (Astronics) L-852T-L-X LED, Inpavement, OMNI 3/9/2013
Type III Equipment/Building Vaisala AWOS II 1/6/2013
Type III Equipment/Building Vaisala AWOS III, III-T, III-P, III-PT, III-PTZ 1/6/2013
Type III Equipment/Building Kodiack America, LLC Snow Blower & Runway Broom Equipment 10/10/2012
Type III Equipment/Building ADB Safegate L-830, Isolation Transformer, 60Hz 7/28/2012
Type III Equipment/Building TREX Aviation Systems FOD Finder XM-Mobile 5/25/2012
Type III Equipment/Building Stratech Systems Limited iFerret TM FOD System 5/5/2012
Type III Equipment/Building ADB Safegate L-849 A, LED Runway End Identification Lights 5/4/2012
Type III Equipment/Building ADB Safegate L-850 A, LED Runway Inpavement Lights 5/4/2012
Type III Equipment/Building ADB Safegate L-850 B, LED Runway Inpavement Lights 5/4/2012
Type III Equipment/Building ADB Safegate L-852 K, LED Taxiway Inpavement Lights 5/4/2012
Type III Equipment/Building ADB Safegate L-852 S, LED Taxiway Inpavement Lights 5/4/2012
Type III Equipment/Building Precision Control Systems L-890, Lighting Control & Monitoring System 4/3/2012
Type III Equipment/Building All Weather, Inc. AWOS I - 900 Series 11/27/2011
Type III Equipment/Building All Weather, Inc. AWOS II - 900 Series 11/27/2011
Type III Equipment/Building All Weather, Inc. AWOS III - 3000 Series 11/27/2011
Type III Equipment/Building All Weather, Inc. AWOS III - 900 Series 11/27/2011
Type III Equipment/Building FlexStake, Inc. L-853, Retro reflective Markers 9/11/2011
Type III Equipment/Building QinetiQ Tarsier FOD System 9/11/2011
Type III Equipment/Building TREX Aviation Systems FOD Finder XF -Fixed 9/11/2011
Type III Equipment/Building X-Sight FODetect Systems 7/26/2011
Type III Equipment/Building Flash Technology L-856, High Intensity Obstruction Lights 3/28/2011
Type III Equipment/Building Flash Technology L-864, Red Obstruction Lights 3/28/2011
Type III Equipment/Building Sherwin Industries, Inc. L-893, Lighted Visual Aid for Runway Closure 3/28/2011
Type III Equipment/Building ADB Safegate L-854, Radio Controls 2/1/2011
Type III Equipment/Building ADB Safegate L-860, Low Intensity Runway Edge Lights 2/1/2011
Type III Equipment/Building Flight Light L-810, Lights-Obstruction (Various Types)* 1/18/2011
Type III Equipment/Building Flight Light L-828, Constant Current Regulators (Various Types)* 1/18/2011
Type III Equipment/Building Flight Light L-861 LED Runway & Taxiway Edge, Medium Intensity Lights 1/18/2011
Type III Equipment/Building Southwire Company L-824, Underground Electrical Cables for Airfield Circuits 1/16/2011
Type III Equipment/Building Nehring Electrical Works L-824, Underground Electrical Cables for Airfield Circuits 11/23/2010
Type III Equipment/Building Point Light Corporation L-806, Wind Cones-Frangible 11/20/2010
Type III Equipment/Building Point Light Corporation L-807, Wind Cones-Rigid 11/20/2010
Type III Equipment/Building Point Light Corporation L-810, Lights-Obstruction 11/20/2010
Type III Equipment/Building Point Light Corporation L-861 LED Runway & Taxiway Edge, Medium Intensity Lights 11/20/2010
Type III Equipment/Building Point Light Corporation L-862, Runway Edge-Threshold-Stop Bar Lights 11/20/2010
Type III Equipment/Building Point Light Corporation L-864, Red Obstruction Lights 11/20/2010
Type III Equipment/Building Amerace - Thomas & Betts Corporation L-830-1, Isolation Transformer, 60Hz 30/45 Watts, 6.6/6.6A 9/19/2010
Type III Equipment/Building Tenco Industries Inc. 202 LMM Snow Blower 8/27/2010
Type III Equipment/Building Flash Technology L-865, White Obstruction Lights 8/17/2010
Type III Equipment/Building Rural Electric L-854, Radio Controls 8/17/2010
Type III Equipment/Building ADB Safegate L-821, Airport Lighting Control Panel 8/7/2010
Type III Equipment/Building Flash Technology L-849, Runway End Identification Lights 6/21/2010
Type III Equipment/Building Flash Technology L-859, Flashing Omnidirectional Lights 6/21/2010
Type III Equipment/Building Airport Lighting Company L-880, Precision Approach Path Indicator 4/27/2010
Type III Equipment/Building Airport Lighting Company L-881, Abbreviated Precision Approach Path Indicator 4/27/2010
Type III Equipment/Building Neubert Aero Corp Dynamic Friction Decelerometer 4/27/2010
Type III Equipment/Building Neubert Aero Corp Dynamic Friction Tester 4/27/2010
Type III Equipment/Building Rural Electric L-821, Airport Lighting Control Panel 4/27/2010
Type III Equipment/Building Rural Electric L-890, Lighting Control & Monitoring System 4/27/2010
Type III Equipment/Building Safe-Hit L-853, Retroreflective Markers 3/20/2010
Type III Equipment/Building Daimler Freightliner M2 Carrier Vehicle 1/12/2010
Type III Equipment/Building Millard Towers Limited L-891 - Low Impact Resistant Structures 12/22/2009
Type III Equipment/Building Millard Towers Limited L-892 - Frangible Support Structure 12/22/2009
Type II - Insufficient Quantity and/or Quality OCEM L-852 S LED Taxiway Inpavement Lights 12/1/2009
Type III Equipment/Building Prysmian Cables and Systems, Inc. L-824, Underground Electrical Cables for Airfield Circuits 10/4/2009
Type III Equipment/Building Airport Lighting Company L-861 Runway & Taxiway Edge, Medium Intensity Lights 9/13/2009
Type III Equipment/Building Airport Lighting Company L-862, Runway Edge-Threshold-Stop Bar Lights 9/13/2009
Type III Equipment/Building Strobe Approach Lighting Technology, LLC L-849, Runway End Identification Lights 8/25/2009
Type III Equipment/Building Strobe Approach Lighting Technology, LLC L-859, Flashing Omnidirectional Lights 8/25/2009
Type III Equipment/Building LoneStar P-632, Bituminous Pavement Rejuvenator 8/17/2009
Type III Equipment/Building Pavement Rejuvenation International, LP P-632, Bituminous Pavement Rejuvenator 8/16/2009
Type III Equipment/Building Soundproof Windows Single Hung 36 X 72 Window 8/14/2009
Type III Equipment/Building ADB Safegate L-828, Constant Current Regulators 7/28/2009
Type III Equipment/Building ADB Safegate L-829, Monitored Constant Current Regulators 7/28/2009
Type III Equipment/Building ADB Safegate L-890, Lighting Control & Monitoring System 7/28/2009
Type III Equipment/Building Airfield Guidance Sign Manufacturers, Inc. L-858, Runway & Taxiway Signs 7/28/2009
Type III Equipment/Building Rural Electric L-867, Non-Load Bearing Light Box 7/24/2009
Type III Equipment/Building Rural Electric L-868, Load Bearing Light Box 7/24/2009
Type III Equipment/Building ADB Safegate L-890, Lighting Control & Monitoring System 7/20/2009
Type III Equipment/Building Olson Industries L-867, Non-Load Bearing Light Box 7/19/2009
Type III Equipment/Building Olson Industries L-868, Load Bearing Light Box 7/19/2009
Type III Equipment/Building Standard Signs, Inc. L-858, Runway & Taxiway Signs 7/10/2009
Type III Equipment/Building Eaton Crouse-Hinds L-890, Lighting Control & Monitoring System 6/30/2009
EXHIBIT "A" Page XA-8 of XA-9
EXHIBIT "A" - Nationwide Buy American Waivers Issued (as of June 13, 2023)
Waiver Type Mfr. Product Eff. Date
Type III Equipment/Building Airport Lighting Equipment L-867, Non-Load Bearing Light Box 6/29/2009
Type III Equipment/Building Airport Lighting Equipment L-868, Load Bearing Light Box 6/29/2009
Type III Equipment/Building Eaton Crouse-Hinds L-801, Beacons-Medium Intensity 6/28/2009
Type III Equipment/Building Eaton Crouse-Hinds L-802, Beacons-High Intensity 6/28/2009
Type III Equipment/Building Eaton Crouse-Hinds L-804 Holding Position Edge Light 6/28/2009
Type III Equipment/Building Eaton Crouse-Hinds L-806, Wind Cones-Frangible 6/28/2009
Type III Equipment/Building Eaton Crouse-Hinds L-807, Wind Cones-Rigid 6/28/2009
Type III Equipment/Building Eaton Crouse-Hinds L-823, Primary Connector Kits 6/28/2009
Type III Equipment/Building Eaton Crouse-Hinds L-828, Constant Current Regulators 6/28/2009
Type III Equipment/Building Eaton Crouse-Hinds L-829, Regulators, Constant Current with Monitor 6/28/2009
Type III Equipment/Building Eaton Crouse-Hinds L-830, Isolation Transformers, 60Hz 6/28/2009
Type III Equipment/Building Eaton Crouse-Hinds L-847, Circuit Selector Switch 6/28/2009
Type III Equipment/Building Eaton Crouse-Hinds L-852, Taxiway Inpavement Lights 6/28/2009
Type III Equipment/Building Eaton Crouse-Hinds L-858, Runway & Taxiway Signs 6/28/2009
Type III Equipment/Building Eaton Crouse-Hinds L-861 LED Runway & Taxiway Edge, Medium Intensity Lights 6/28/2009
Type III Equipment/Building Eaton Crouse-Hinds L-862, Runway Edge-Threshold-Stop Bar Lights 6/28/2009
Type III Equipment/Building Eaton Crouse-Hinds L-880, Precision Approach Path Indicator 6/28/2009
Type III Equipment/Building Eaton Crouse-Hinds L-881, Abbreviated Precision Approach Path Indicator 6/28/2009
Type III Equipment/Building Eaton Crouse-Hinds L-884, Power & Control Unit 6/28/2009
Type III Equipment/Building ADB Safegate L-804, Holding Position Edge Light 6/26/2009
Type III Equipment/Building ADB Safegate L-807, Wind Cones-Rigid 6/26/2009
Type III Equipment/Building ADB Safegate L-810, Lights-Obstruction 6/26/2009
Type III Equipment/Building ADB Safegate L-827, Monitors-Regulator 6/26/2009
Type III Equipment/Building ADB Safegate L-828, Constant Current Regulators 6/26/2009
Type III Equipment/Building ADB Safegate L-829, Monitored Constant Current Regulators 6/26/2009
Type III Equipment/Building ADB Safegate L-847, Circuit Selector Switch 6/26/2009
Type III Equipment/Building ADB Safegate L-853, Retroreflective Markers 6/26/2009
Type III Equipment/Building ADB Safegate L-858, Runway & Taxiway Signs 6/26/2009
Type III Equipment/Building ADB Safegate L-861 Runway & Taxiway Edge, Medium Intensity Lights 6/26/2009
Type III Equipment/Building ADB Safegate L-862, Runway Edge-Threshold-Stop Bar Lights 6/26/2009
Type III Equipment/Building ADB Safegate L-880, Precision Approach Path Indicator 6/26/2009
Type III Equipment/Building ADB Safegate L-881, Abbreviated Precision Approach Path Indicator 6/26/2009
Type III Equipment/Building ADB Safegate L-884, Power & Control Unit 6/26/2009
Type III Equipment/Building Halibrite L-801, Beacons-Medium Intensity 6/23/2009
Type III Equipment/Building Halibrite L-802, Beacons-High Intensity 6/23/2009
Type III Equipment/Building Halibrite L-806, Wind Cones-Frangible 6/23/2009
Type III Equipment/Building Halibrite L-807, Wind Cones-Rigid 6/23/2009
Type III Equipment/Building Halibrite L-893, Lighted Visual Aid for Runway Closure 6/23/2009
Type III Equipment/Building Manairco L-801, Beacons-Medium Intensity 6/23/2009
Type III Equipment/Building Manairco L-828, Constant Current Regulators 6/23/2009
Type III Equipment/Building Manairco L-861 Runway & Taxiway Edge, Medium Intensity Lights 6/23/2009
Type III Equipment/Building Multi-Electric L-804, Holding Position Edge Light 6/23/2009
Type III Equipment/Building Multi-Electric L-861 LED Runway & Taxiway Edge, Medium Intensity Lights 6/23/2009
Type III Equipment/Building Multi-Electric L-862, Runway Edge-Threshold-Stop Bar Lights 6/23/2009
Type III Equipment/Building Multi-Electric L-880, Precision Approach Path Indicator 6/23/2009
Type III Equipment/Building Multi-Electric L-881, Abbreviated Precision Approach Path Indicator 6/23/2009
Type III Equipment/Building DME L-861 LED Runway & Taxiway Edge, Medium Intensity Lights 6/21/2009
Type III Equipment/Building DME L-862, Runway Edge-Threshold-Stop Bar Lights 6/21/2009
Type III Equipment/Building Integro L-830, Isolation Transformers, 60Hz 6/21/2009
Type III Equipment/Building Jaquith Industries L-867, Non-Load Bearing Light Box 6/21/2009
Type III Equipment/Building Jaquith Industries L-868, Load Bearing Light Box 6/21/2009
Type III Equipment/Building Jaquith Industries L-891 - Low Impact Resistant Structures 6/21/2009
Type III Equipment/Building Jaquith Industries L-892 - Frangible Support Structure 6/21/2009
EXHIBIT "A" Page XA-9 of XA-9
JASPER COUNTY
RIDGELAND-CLAUDE DEAN AIRPORT
CS-1
CERTIFICATE OF SECRETARY
_________________________________________________________________________
AS TO RESOLUTION ADOPTED BY BOARD OF DIRECTORS
ON ______________________________________
I, _______________________________________________, hereby certify that I am the
duly authorized Secretary of Trinity Electrical Services, Inc., charged with keeping the records and the seal of
said Corporation, and that the following is a true and correct copy of a resolution adopted at a meeting of the
Board of Directors of the Corporation duly held on ____________________________________, which
resolution is now in full force and effect.
RESOLVED, that _____________________________________________, (President,
Vice President) of __________________________________________________________,
is hereby authorized to execute contracts, performance bonds and labor and materials bonds on behalf of the
Corporation.
WITNESS my hand as Secretary, and the seal of the Corporation
this ______ day of _________________________________, 2023.
___________________________________________
Secretary
Sworn to before me this ______day of ______________________________, 2023.
______________________________________________________________________________
Notary Public for _______________________________________________ County
My Commission Expires: _______________________________________________
JASPER COUNTY
RIDGELAND-CLAUDE DEAN AIRPORT
THIS PAGE LEFT BLANK INTENTIONALLY
PB-1
CONSTRUCTION PERFORMANCE BOND
Any singular reference to Contractor, Surety, Owner, or other party shall be considered plural where applicable.
CONTRACTOR (Name and Address): SURETY (Name a nd Address of Principal Place of Business):
TRINITY ELECTRICAL SERVICES, INC.
2317 GOLDEN ISLES WEST
BAXLEY, GEORGIA 31513
OWNER (Name and Address):
JASPER COUNTY
358 THIRD AVENUE
RIDGELAND, SC 29936
CONTRACT
Date:
Amount: $287,070.00
Description (Name and Location):
RIDGELAND-CLAUDE DEAN AIRPORT
AWOS III P/T PROJECT
FAA A.I.P. No. 3-45-0048-018-2023
BOND
Bond Number:
Date (Not earlier than Contract Date):
Amount: $
Modifications to this Bond Form:
Surety and Contractor, intending to be legally bound hereby, subject to the terms printed on the reverse side hereof, do each cause this
Performance Bond to be duly executed on its behalf by its authorized officer, agent, or representative.
CONTRACTOR AS PRINCIPAL SURETY
Company: Trinity Electrical Services, Inc.
Signature: (Seal) (Seal)
Name and Title: Surety’s Name and Corporate Seal
By:
Signature and Title
(Attach Power of Attorney)
(Space is provided below for signature s of additional
parties, if required.)
Attest:
Signature and Title
CONTRACTOR AS PRINCIPAL SURETY
Company:Trinity Electrical Services Inc.
Signature: (Seal) (Seal)
Name and Title: Surety’s Name and Corporate Seal
By:
Signature and Title
(Attach Power of Attorney)
Attest:
Signature and Title:
EJCDC No. C-610 (2002 Edition)
Originally prepared through the joint efforts of the Surety Association of America, Engineers Joint Contract Documents Committee, the Associated General Contractors of America, and
the American Institute of Architects.
PB-2
1. Contractor and Surety, jo intly and severally, bind themselv es, their heirs, execut ors,
administrators, successors, and assigns to Owner for the performanc e of the Contract,
which is incorporated herein by reference.
2. If Contractor performs the Contract, Surety and Contractor h ave no obligation under
this Bond, except to participate in conferences as provided in Paragraph 3.1.
3. If there is no Owner Default, Surety's obligation under this Bond shall arise after:
3.1. Owner has notified Contra ctor and Surety, at the addresses described in
Paragraph 10 below, that Owner is consideri ng de claring a Contractor
Default and has requested and attempted to arr ange a conference with
Contractor and Surety to be held not later than 15 days after receipt of such
notice to discuss methods of performing the Contract. If Ow ner, Contractor
and Surety agree, Contractor shall be allowed a reasonable time to perform
the Contract, but such an agreement shall not waive Owner's ri ght, if any,
subsequently to declare a Contractor Default; and
3.2. Owner has declared a Contractor Defaul t and formally term inated
Contractor's right to complete the Contract. Such Contractor Default shall not
be declared earlier than 20 days after Cont ractor and Surety have received
notice as provided in Paragraph 3.1; and
3.3. Owner has agreed to pay the Balance of the Contract Price to:
1. Surety in accordance with the terms of the Contract;
2. Another contractor selected pursuant to Paragraph 4.3 to
perform the Contract.
4. When Owner has satisfied the conditions of Paragraph 3, Surety shall promptly and at
Surety's expense take one of the following actions:
4.1. Arrange for Contractor, with consent of Owner, to perform and complete the
Contract; or
4.2. Undertake to perform and complete the Contract itself, th rough its agents or
through independent contractors; or
4.3. Obtain bids or negotiated proposals from qualified contractors acceptable to
Owner for a contract for performance and complet ion of the Contract,
arrange for a contract to be prepared for execut ion by Owner and Contractor
selected w ith Owner's concurr ence, to be sec ured with performance and
payment bonds executed by a qualified surety equivalent to the bonds issued
on the Contra ct, and pay to Owner the amount of d amages as described in
Paragraph 6 in excess of the Balance of the Cont ract Price incurred by
Owner resulting from Contractor Default; or
4.4. Waive its right t o perform and complete, arrange for completion, or obtain a
new contractor and with reasonable promptness under the circumstances:
1. After investigation, det ermine the amount for w hich it may be
liable to Owner and, as soon as practicable after the amo unt is
determined, tender payment therefor to Owner; or
2. Deny liability in whole or in part and notify Owner citing reasons
therefor.
5. If Surety does not proceed as provided in P aragraph 4 wit h reasonable promptness,
Surety shall be deemed to be in default on this Bond 15 days after receipt of an additional
written notice from Owner to Suret y demanding that Surety perform i ts obligations under
this Bond, and Ow ner shall be entitle d to enforce a ny remedy available to Owner. If
Surety proceeds as provided in Paragraph 4.4, and Owner refuses the payment tendered
or Surety has denied liability, in whole or in
part, without fu rther notice Owner shall be enti tled to enforce any remedy av ailable t o
Owner.
6. After Owner has terminated Contractor's right to complete the Contract, and if Surety
elects to act under Paragraph 4.1, 4.2, or 4.3 above, then the responsibilities of Surety to
Owner shall not be greater than those of Contractor und er the Co ntract, and the
responsibilities of Owner to Surety shall not be greater than those of Owner under the
Contract. To a li mit of the amount of this Bond, but subject to commitment by Ow ner of
the Balance of the Contract Price to mitigation of costs and damages on the Contract,
Surety is obligated without duplication for:
6.1. The responsibilities of Contractor for correction of defective Work and
completion of the Contract;
6.2. Additional legal, design professional, and delay costs resulting from
Contractor's Default, and resulting from the actions or failure to act of Surety
under Paragraph 4; and
6.3. Liquidated da mages, or if no liquidated damages ar e specified in the
Contract, act ual damages caused by delayed perf ormance or non-
performance of Contractor.
7. Surety shall not be liable to Owner or others for obligations of Contractor that are
unrelated to the Cont ract, and the Balance of the Contrac t Price shall not be reduced or
set off on account of any such unrelate d obligations. No r ight of action shall accrue on
this Bond to any person or entity other t han Owner or its heirs, executors, administrators,
or successors.
8. Surety hereby waives no tice of any change, including chang es of time, to Contract or
to related subcontracts, purchase orders, and other obligations.
9. Any proceeding, legal or equit able, under this Bond may be instituted in any court of
competent jurisdiction in the location in which the Work or part of the Work is located and
shall be ins tituted within two years after Contrac tor Default or within two years after
Contractor ceased working or within two years after Surety refuses or fails t o perform its
obligations under this Bond, whichever occurs first. If the provisions of this paragraph are
void or prohibited by law, the mi nimum period of limitation available to sureties as a
defense in the jurisdiction of the suit shall be applicable.
10. Notice to Surety, Owner, or Co ntractor shall be mailed or deliv ered to the address
shown on the signature page.
11. Whe n this Bond ha s been furnished to comply with a statutory requirement in the
location where the Contract was to be performed, any provision in this Bond conflicting
with said statutory requirement s hall be deemed deleted herefrom and pr ovisions
conforming to su ch statut ory requirement shall be deemed incorporated herein. The
intent is that this Bond shall be construed as a statutor y bond and not as a common law
bond.
12. Definitions.
12.1 Balance of the Contract Price: The total amou nt payable by Owner to
Contractor under the Contract after all proper adjustments have been made,
including allowance to Contractor of any amounts re ceived or to be received
by Owner in settlement of insurance or other Claims for damages to which
Contractor is entitled, reduc ed by all valid and proper payments made to or
on behalf of Contractor under the Contract.
12.2. Contract: The agreement between Own er and Contractor identified o n the
signature page, including all Contract Documents and changes thereto.
12.3. Contractor Default: Failure of Contractor, which has neither been remedied
nor waived, to perform or otherwise to comply with the terms of the Contract.
12.4. Owner Defaul t: Failure of Owner, which has neit her been remedied nor
waived, to pay Contractor as requi red b y the Contract or to perform and
complete or comply with the other terms thereof.
PB-3
CONSTRUCTION PAYMENT BOND
Any singular reference to Contractor, Surety, Owner, or other party shall be considered plural where applicable.
CONTRACTOR (Name and Address): SURET Y (Name and Address of Principal Place of Business):
TRINITY ELECTRICAL SERVICES, INC.
2317 GOLDEN ISLES WEST
BAXLEY, GEORGIA 31513
OWNER (Name and Address):
JASPER COUNTY
358 THIRD AVENUE
RIDGELAND, SC 29936
CONTRACT
Date:
Amount: $287,070.00
Description (Name and Location):
RIDGELAND-CLAUDE DEAN AIRPORT
AWOS III P/T PROJECT
FAA A.I.P. No. 3-45-0048-018-2023
Bond Number:
Date (Not earlier than Contract Date):
Amount: $
Modifications to this Bond Form:
Surety and Contractor, intending to be legally bound hereby, subject to the terms printed on the reverse side hereof, do each cause this
Payment Bond to be duly executed on its behalf by its authorized officer, agent, or representative.
CONTRACTOR AS PRINCIPAL SURETY
Company: Trinity Electrical Services, Inc.
Signature: (Seal) (Seal)
Name and Title: Surety’s Name and Corporate Seal
By:
Signature and Title
(Attach Power of Attorney)
(Space is provided below for signature s of additional
parties, if required.)
Attest:
Signature and Title
CONTRACTOR AS PRINCIPAL SURETY
Company: Trinity Electrical Services Inc.
Signature: (Seal) (Seal)
Name and Title: Surety’s Name and Corporate Seal
By:
Signature and Title
(Attach Power of Attorney)
Attest:
Signature and Title:
EJCDC No. C-615 (2002 Edition)
PB-4
Originally pr epared through the joint efforts of the Surety Association of America, Engineers Joint Contract Documents Com mittee, the Associated
General C ontractors of America, the Ameri can Ins titute of Architects, the American S ubcontractors Association, and the Associated Specialty
Contractors
1. Contractor an d Surety, jointly and severally, bind themselves, their heirs, executors,
administrators, succ essors, an d assigns to Owner t o pay for labor, materials, and
equipment furnished by Claimants for use in the perfor mance of the Contract, which is
incorporated herein by reference.
2. With respect to Owner, this obligation shall be null and void if Contractor:
2.1. Promptly makes payment, directly or indirectly, for all su ms due C laimants,
and
2.2. Defends, indemnifies, and holds harmless Owner from all claims, demands,
liens, or suits alleging non- payment by Contractor by any person or entity who
furnished l abor, materials, or equip ment for use in the performance of the
Contract, provided Owner has pr omptly notified Contractor and Surety (at the
addresses described in Paragraph 12) of any claims, demands, liens, or sui ts
and tendered defense of such cl aims, demands, liens, or suits to Contractor
and Surety, and provided there is no Owner Default.
3. With respec t to Claimants, this obligation shall be null and v oid if Contractor promptly
makes payment, directly or indirectly, for all sums due.
4. Surety shall have no obligation to Claimants under this Bond until:
4.1. Claimants who are employed by or have a di rect contract with Contractor
have given notice to Surety (at the addresses described in Paragraph 12) and
sent a copy, or notice thereof, to O wner, s tating that a claim is be ing m ade
under this Bond and, with substantial accuracy, the amount of the claim.
4.2. Claimants who do not have a direct contract with Contractor:
1. Have furnished written notice to Cont ractor and sent a copy, or
notice thereof, to Owner, within 90 days after having last performed labor or
last furni shed materials or equipment incl uded in the claim stating, with
substantial accuracy, the amount of the claim and the name of the party to
whom the materials or equipment were furnished or supplied, or for whom
the labor was done or performed; and
2. Have either received a rejection in whole or in part from
Contractor, or not recei ved w ithin 30 days of furnishing the above notice
any communication from Contractor by which Cont ractor had indicated the
claim will be paid directly or indirectly; and
3. Not h aving been paid withi n the above 30 days, have sent a
written notice to Surety and sent a copy, or notice thereof, to Owner, stating
that a c laim is being made under this Bond and en closing a copy of the
previous written notice furnished to Contractor.
5. If a notice by a Cl aimant required by Paragraph 4 is provided by Owner to Co ntractor
or to Surety, that is sufficient compliance.
6. When a Claimant has satisfied the conditions of Paragraph 4, the Sur ety shall
promptly and at Surety's expense take the following actions:
6.1. Send an answer to that Claimant, with a copy to Owner, wi thin 45 days after
receipt of the claim, stating the amounts that are undisputed and the bas is for
challenging any amounts that are disputed.
6.2. Pay or arrange for payment of any undisputed amounts.
7. Surety's total obligation shall not exceed t he amount of this Bond, and the amount of
this Bond shall be credited for any payments made in good faith by Surety.
8. Am ounts o wed by Owner to Contractor under the Contract s hall be used for t he
performance of the Contract and to satisfy claims, if any , under any performance bond.
By Contractor furnishing and Owner accepting this Bond, they agree that all funds earned
by Contractor in the performance of th e Contract are dedicated to satisfy ob ligations of
Contractor and Surety under this Bond, subject to Owner's priority to use the funds for the
completion of the Work.
9. Surety shall not be liable to O wner, Claimants, or others for obligations of Contr actor
that are unrelated to the Contract. Owner shall not be liable for payment of any costs or
expenses of any Claimant under this Bond, and shall have under this Bond no obligations
to make payments to, give notices on behalf of, or otherwise have obligations to
Claimants under this Bond.
10. Surety hereby waives notice of any change, including chan ges of time, to the
Contract or to related Subcontracts, purchase orders and other obligations.
11. No suit or action shal l be commenced by a Claimant under this B ond other than in a
court of competent j urisdiction in the location in which the Work or par t of the Work is
located or after the expiration of one year fr om the date (1) on which the Claimant gave
the notice required by Paragraph 4.1 or Paragraph 4.2.3, or (2) on which the last labor or
service was performed by anyone or the last materials or eq uipment were furnished by
anyone under the Construction Contrac t, whichever of (1) or (2) first occurs. If the
provisions of this paragraph are void or prohibited by law, the minimum period of limitation
available to sureties as a defense in the jurisdiction of the suit shall be applicable.
12. Notice to Surety, Ow ner, or Contractor shall be mailed or delivered to the addresses
shown on the signature page. Actual receipt of notice by Surety, Owner, or Contractor,
however accomplished, shall be sufficie nt compliance as of the date received at the
address shown on the signature page.
13. When this Bond ha s been furnished to comply with a statutory require ment in t he
location where the Contract was to be performed, any provision in this Bond conflicting
with said statutory requirement shall be deemed deleted herefrom and provisions
conforming t o such statut ory requirement s hall be deemed incorporated herein . The
intent is that this B ond shall be construed as a statutory Bond and not as a common law
bond.
14. Upon request of any person or entity appearing to be a potential beneficiary of thi s
Bond, Contractor shall promp tly furnish a copy of this Bond or shall permit a copy to be
made.
15. DEFINITIONS
15.1. Claimant: An individual or entity having a direct contract with Contractor, or
with a first- tier subcontra ctor of Contractor, to furni sh labor, mat erials, or
equipment for use in the performance of the Contr act. The intent of this Bond
shall be t o include without limitation in the terms "labor, m aterials or
equipment" that part of water, gas, power, light, he at, oil, gasoline, telephone
service, or rental equipment used in the Contract, architectural and engineering
services required for performan ce of the Work of Contractor and Contractor's
Subcontractors, and all other items for which a mechanic's lien may b e
asserted in the jurisdicti on where the labor, materials, or equipment were
furnished.
15.2. Contract: The agreem ent b etween Own er and Cont ractor identified on the
signature page, including all Contract Documents and changes thereto.
15.3. Owner Default: Failure of Owner, which has neither been remedied nor
waived, to pay Contractor as requi red by the Contract or to perform and
complete or comply with the other terms thereof.
Comments
Item # Spec. No. Description Quantity Unit Price Total Rev'd Qty Total
1 C-105 Mobilization/General Conditions 1 LS 25,000.00$ $ 25,000.00 1.00$ $ 25,000.00 No change
2 P-152 Unclassified Excavation 50 CY 50.00$ $ 2,500.00 50.00$ $ 2,500.00 No change
3 T-901A Temporary Grassing and Mulching 0.1 AC 12,000.00$ $ 1,200.00 -$ $ - Delete temporary grassing
4 T-901B Permanent Grassing and Mulching 0.1 AC 15,000.00$ $ 1,500.00 0.25$ $ 3,750.00 Increase Slightly to offset elimination of #57 Stone
5 SC-300A SCDOT No. 57 Aggregate Access Drive (6" Thick) 210 SY 80.00$ $ 16,800.00 -$ $ - Delete completely; County to construct later if desired.
6 SC-300B SCDOT No. 57 Aggregate AWOS Equipment Pad (6" Thick) 109 SY 80.00$ $ 8,720.00 -$ $ - Delete completely; County to construct later if desired.
7 SC-815 Temporary Silt Fence - Single Row 160 LF 10.00$ $ 1,600.00 -$ $ - Delete. Not needed without gravel grading.
8 L-108-1 Install 3/C, #3 AWG, 600 Volt Type 'UGE' Cable installed in
Trench, Ductbank or Conduit, 2,000 LF 7.00$ $ 14,000.00 2,000.00$ $ 14,000.00 No change
9 L-108-2 Single Fiber Optic Cable 2,300 LF 3.00$ $ 6,900.00 -$ $ - Delete. Use wireless communication.
10 L-109-1 Install Circuit Breaker, 30A, 208V, 3-Phase, Installed in
Existing Panelboard 1 EA 1,100.00$ $ 1,100.00 1.00$ $ 1,100.00 No change
11 L-109-2 Communications Cabinet, 24"x24"x12" (Complete with Data
Cabling & Termination Equipment) 1 EA 3,500.00$ $ 3,500.00 -$ $ - Delete. Use wireless communication.
12 L-109-3 Bare Ground Conductor, #4/0 AWG, Copper 62 LF 7.00$ $ 434.00 62.00$ $ 434.00 No change
13 L-109-4 Bare Ground Conductor, #6 AWG, Copper Jumper 70 LF 5.00$ $ 350.00 70.00$ $ 350.00 No change
14 L-109-5 Ground Rod, Copper-Clad Steel, 3/4" DIA x 10'L 6 EA 250.00$ $ 1,500.00 6.00$ $ 1,500.00 No change
15 L-109-6 Ground Test Well 1 EA 1,500.00$ $ 1,500.00 1.00$ $ 1,500.00 No change
16 L-110-1 Install 1 way 2” Schedule 40 PVC, Direct Buried in Trench 460 LF 6.00$ $ 2,760.00 2,000.00$ $ 12,000.00 Use 1-way 2" for entire power home run
17 L-110-2 Install 2 way 2” Schedule 40 PVC, Direct Buried in Trench 1,950 LF 12.00$ $ 23,400.00 -$ $ - Delete 2-way 2", replace with 1-way-2" (no comm lines)
18 L-110-3 Install Trench & Backfill 2,410 LF 1.10$ $ 2,651.00 2,000.00$ $ 2,200.00 Shorter route, less trench
19 L-110-4 Extend to Existing Ductbank with 2-Way 3" Flexible PVC
Duct 60 LF 20.00$ $ 1,200.00 -$ $ - Not needed
20 L-115-1 Install Junction Can Plaza [2-Way] 4 EA 2,500.00$ $ 10,000.00 2.00$ $ 5,000.00 Delete Junction Can Plaza, replace with 16" Junction Can
21 L-115-2 Install Handhole, Precast Concrete, Tier 22 2 EA 1,200.00$ $ 2,400.00 1.00$ $ 1,200.00 Delete one handhole for communication
22 L-119-1 Install L-110 Airport Obstruction Light, LED Type, Complete
in Place 2 EA. 2,000.00$ $ 4,000.00 2.00$ $ 4,000.00 No change
23 L-126-1 AWOS System (Complete) with Fixed Tower (Base Bid) 1 LS 204,536.00$ $ 204,536.00 1.00$ $ 204,536.00 Use fixed tower (lower cost)
24 L-126-2 AWOS System (Complete) with Tilt-over Tower (Bid
Alternate) 1 LS 218,192.00$ $ 218,192.00 -$ $ - Delete tilt-over option
25 L-126-3 AWOS 30' Fixed Tower (Complete) for UHF Antenna (Base
Bid) 1 LS 19,356.00$ $ 19,356.00 -$ $ - Delete UHF tower, mount antenna to terminal
26 L-126-4 AWOS 30' Tilt-over Tower (Complete) for UHF Antenna (Bid
Alternate) 1 LS 30,000.00$ $ 30,000.00 -$ $ - Delete tilt-over option
27 L-126-5 Miscellaneous electrical infrastructure (Concrete Post, 20A
Enclosed Circuit Breaker, Step-up & Step-down transformer) 1 LS 8,000.00$ $ 8,000.00 1.00$ $ 8,000.00 No change
BASE BID SCHEDULE TOTAL (ITEMS 1-23, 25, 27) = 364,907.00$ 287,070.00$ INITIAL CONTRACT AMOUNT
NET REDUCTIONS FROM BID PRICE = (77,837.00)$
Adjusted ProjectBID OPENING: OCTOBER 4, 2022, 2:00 P.M. Trinity Electrical Bid
ATTACHMENT A - SCHEDULE OF VALUES
AWOS III P/T PROJECT - REDUCED SCOPE OF WORK
FAA A.I.P. No. 3-45-0048-016-2021 (DESIGN)
FAA A.I.P. No. 3-45-0048-018-2023 (CONSTRUCTION)
Ridgeland-Claude Dean Airport
ATTACHMENT A
SCHEDULE OF VALUES Page A-1
Minutes -
05.15.2023
JASPER COUNTY COUNCIL
Jasper County Clementa C. Pinckney Government Bldg.
358 3rd Avenue Ridgeland, SC 29936
Monday, May 15, 2023
Budget Workshop:
Jasper County School District – Dr. Rechel Anderson and Russell Zimmerman, Interim Director of Finance
Dr. Anderson and Mr. Zimmerman were present to address the request for the Jasper County School District.
They noted that their budget had not gone before the school board yet for the first reading. It was also noted
that miss Wright would be sending Council over the fiscal year 2022 budget and would also send it over to Mr.
Fulghum. She then turned it over to Mr. Zimmerman for this request. He noted they were presenting A
balanced budget and would like to ask for an increase of 26.5 mills. He reviewed the number of students as well
as the step increases for teachers, increases for drivers and he discussed the different departments and the
funding for the last six years. Vice chairwoman Clark noted that the reason for the request of the additional 26.5
mill increase was that the 1% increase was not voted back in. Chairman Sauls noted that although they were
saying it was a balanced budget that they still wanted the County to increase the school mileage by 26.5 mills.
Jasper County Coroner’s Office – Willie Aiken, Coroner
Coroner Aiken was present to address this budget request. He thanked Council for his time to discuss his
budget. He noted he had sent a 2023 annual budget over to Ms. Burgess and it had been reviewed. He noted
that he had moved to a new location at 1504 Grays Highway and that they were in the same building as the
morgue. He noted that the County is growing and that his biggest request is for two more Deputy Coroners. He
noted that he currently has one Deputy Coroner and another that is deputized as a Deputy Coroner but is acting
in the capacity of their records person and stated that he needed two more Field Deputies. He discussed his
department and its operations.
BJH Comprehensive Health – Dr. Faith Polkey
Dr. Polkey was present to address their budget request and passed out PowerPoint copies to Council. She noted
they were a private nonprofit organization and that they had been here for 53 years. She noted there were 10
center locations, 3 mobile sites, and a site at Okatie. For additional information on her budget request please
see the documents attached in the Council e-packet on our website at 05.15.2023 Agenda e-packet - Part 1
(Agenda thru Workshop Presenters).pdf (jaspercountysc.gov).
Minutes -
05.15.2023
Jasper Animal Rescue Mission – Cindy Abernathy
Ms. Abernathy was present to address this budget request with Council. She noted that in 2022 they had 837
dogs and 951 cats. She mentioned that the medical supplies for animals have increased in cost and that the
payroll for personnel had also increased. She noted that they had raised $30,000 at a fundraiser and that there
was an upcoming golf tournament in October. She noted they were overextended most of the time and that
they are taking in a lot more animals. She also discussed additional information about their organization.
Jasper Soil and Water Conservation District – Lyn Boyles
Lyn Boyles was present to address this budget request with Council. She noted this was her 9th year to be here
with the Conservation League and spoke about the NRCS and what this entailed. She also discussed how this
worked with the farmers and discussed their part in Farm Services Funding. She requested help with the Blue
Heron Nature Center is always welcomed, she noted. She also noted that there would be a camp this year and
it was the first camp to be held since COVID.
Executive Session began at the conclusion of the Workshop:
Officials Present: Chairman L. Martin Sauls IV, Vice Chairwoman Barbara B. Clark, Councilman Pastor Alvin
Adkins, Councilman John Kemp and Councilman Coy Garbade.
Staff Present: County Administrator Andrew Fulghum, Wanda Simmons, Clerk to Council,
County Attorney David Tedder, Kimberly Burgess, Russell Wells, Lisa Wagner, and Videographer
Jonathan Dunham.
Chairman Sauls called the Executive Session Meeting to order and read the Report of Compliance with the
Freedom of Information Act was read for the records as follows: In compliance with the Freedom of
Information Act, notice of meetings and agendas were posted and furnished to all news media and persons
requesting notification.
Chairman Sauls read through the Executive Session Items. A motion was made by Councilman Kemp to go into
executive session. Vice Chairwoman Clark seconded the motion. The motion was unanimously approved. The
motion passed.
Executive Session SECTION 30-4-70.
(a) A public body may hold a meeting closed to the public for one or more of the following reasons:
(2) Discussion of negotiations incident to proposed contract arrangements and
proposed purchase or sale of property, the receipt of legal advice where the legal
advice related to pending, threatened, or potential claim or other matters covered
by the attorney-client privilege, settlement of legal claims, or the position of the
public agency in other adversary situations involving the assertion against the
agency of a claim – Professional Services— Route 278 Widening Project; Ridgeland –
Claude Dean Airport; Levy Volunteer Fire Department Consolidation
Minutes -
05.15.2023
(5) Discussion of matters relating to the proposed location, expansion, or the provision
of services encouraging location or expansion of industries or other businesses in
the area served by a public body –Jasper Ocean Terminal
ANY EXECUTIVE SESSION MATTER ON WHICH DISCUSSION HAS NOT BEEN COMPLETED MAY HAVE
DISCUSSION SUSPENDED FOR PURPOSES OF BEGINNING THE OPEN SESSION AT ITS SCHEDULED TIME, AND
COUNCIL MAY RETURN TO EXECUTIVE SESSION DISCUSSION AFTER THE CONCLUSION OF THE OPEN SESSION
AGENDA ITEMS. PLEASE BE ADVISED THERE MAY BE VOTES BASED ON ITEMS FROM THE EXECUTIVE SESSION.
Return to Open Session at 6:30pm:
Motion to return to open session: Councilman Adkins
Second: Vice Chairwoman Clark
Vote: Unanimous
The motion passed.
Action coming out of Executive Session: None
The Pledge of Allegiance was recited and the Invocation was given by Councilman Adkins.
Discussion of Consent Agenda and Agenda Items:
The consent agenda was discussed.
Approval of Agenda:
Motion to approve the agenda with the movement of Item # 21 and making it Item # 9A and moving Item # 22
and making it Item # 9B: Councilman Adkins
Second: Councilman Kemp
Vote: Unanimous
The motion passed.
____________________________________________________________________________________
PRESENTATIONS AND PROCLAMATIONS
_______________________________________________________________________________________
Proclamations: None
Presentations: None
_______________________________________________________________________________________
PUBLIC HEARINGS AND ACTION ITEMS
Minutes -
05.15.2023
9. David Tedder – Consideration an ordinance of Jasper County Council establishing a Temporary
Moratorium on Applications, Administrative Processing and Permitting for approval of Large
Residential Subdivisions, Major Subdivisions, Commercial Development Projects and Signage
within the described Euhaw Broad River Planning Area, providing for exceptions from the
Temporary Moratorium; invoking application of the pending Ordinance Doctrine; and matters
related thereto.
Mr. Tedder was present to address and review this item with Council. He discussed how this ordinance would
establish a Temporary Moratorium on Applications, Administrative Processing and Permitting for approval of Large
Residential Subdivisions, Major Subdivisions, Commercial Development Projects and Signage within the described
Euhaw Broad River Planning Area, providing for exceptions from the Temporary Moratorium; and invoking
application of the pending Ordinance Doctrine. He noted that on June 5th there would be a Public Hearing on this
item and that staff was asking for consideration on this Ordinance as the first reading. Mr. Tedder also noted that
there was a request in the ordinance for municipalities to adhere to the moratorium.
Motion to approve: Councilman Kemp
Second: Councilman Adkins
Vote: Unanimous
The motion passed.
Move to authorize the Administrator to retain Denise Grabowsi of Symbiosity to perform a Comprehensive Plan
5-year update, at a cost not to exceed $75,000 wit the first deliverable to be an update for the Land Use Plan and
Comprehensive Plan for the Moratorium area: Councilman Kemp
Second: Councilman Adkins
Vote: Unanimous
The motion passed.
9A. Russell Wells – Consideration of the 3rd reading of Ordinance #O-2022-39 Authorizing Certain
Amendments, Modifications and Changes to the County’s Code of Ordinances; Authorizing the Execution and
Delivery of a Consolidated Fire Service Agreement Between Jasper County, South Carolina and Levy Volunteer
Fire Department; Authorizing the Appropriation of County Funds Under the Terms of Such Agreement; and
Other Matters Relating Thereto. (Formerly Item # 21 under Consent Agenda)
(12.05.2022 1st reading; 01.17.2023 2nd reading).
Chief Wells was present to address and review this item with Council. He noted that this was the 3rd reading
before Council with this ordinance which would authorize certain amendments, modification and changes to the
County’s Code of Ordinances; authorizing the execution and delivery of a Consolidated Fire Service Agreement
between Jasper County and Levy Volunteer Fire Department; authorizing the appropriation of County Funds under
the terms of such agreement. He noted that the Levy Fire Board had signed the agreement. Mr. Tedder reviewed
this request and noted some of the provisions of this ordinance for Council.
Mr. Tedder noted that it was the expressed desire of Council that there be two Ex-Officio Members one being the
Chairperson (or their designee) and a Councilperson who represents the area that includes the Levy Volunteer Fire
District Area. Chief Wells also provided the assessed value of the assets.
Minutes -
05.15.2023
Motion to move to approve the ordinance regarding the Levy Fire District with the following amendment to
section 9-96, subsection 3, so that the 4th sentence shall read: the Chair of County Council, or his or her
designee, and the council member representing the area including the Levy Fire District, shall also serve on the
board in an Ex-Officio capacity; and that the Administrator with the assistance of the County Attorney is
authorized to make such administrative insertions and any corrections to the closing documents: Vice
Chairwoman Clark
Second: Councilman Kemp
Vote: Unanimous
The motion passed.
9B. Russell Wells – Presentation and consideration of a proposal for acquisition of EMS Patient Transport
Utility Vehicles. (Formerly Item # 22 under Consent Agenda)
Chief Wells was present to address and review this item with Council. He discussed the style of EMS Patient
Transportation Utility Vehicles for Council.
Motion to approve: Vice Chairwoman Clark
Second: Councilman Adkins
Vote: Unanimous
The motion passed.
10. Andrew Fulghum – Public Hearing, discussion and consideration of the 3rd reading of Ordinance #O-
2023-08 to amend the Jasper Ocean Terminal Multi County Industrial / Business Park MCIP Agreement.
Mr. Fulghum was present to address, review and discuss this item with the Council regarding this
ordinance request to amend the Jasper Ocean Terminal Multi County Industrial / Business Park MCIP
Agreement. He noted that this ordinance expanded the existing boundaries. He noted that this was the
third reading and public hearing. He noted that this MCIP was with the following neighboring counties:
Allendale County, Bamberg County, Beaufort County, Colleton County and Hampton County. The public
hearing was opened but there were no comments, so the public hearing was closed.
Motion to approve: Vice Chairwoman Clark
Second: Councilman Kemp
Vote: Unanimous
The motion passed.
11. Kimberly Burgess – Public Hearing, presentation, discussion, and consideration of the 2nd reading of
Ordinance #O-2023-09 to provide for the levy of tax for public purposes in Jasper County for the fiscal year
beginning July 1st, 2023 and ending June 30th 2024 and to make appropriations for said purposes; to adopt
and approve the Jasper County capital and operations budget for fiscal year 2023-2024, to adopt and approve
the Jasper County School District capital and operations budget for fiscal year 2023–2024; to provide for the
levy of taxation for fiscal year 2023–2024; and matters thereto.
Ms. Burgess was present to address and review this item with Council. This item is for consideration
before Council included a Public Hearing, presentation, discussion, and consideration of the 2nd reading of
Ordinance #O-2023-09 to provide for the levy of tax for public purposes in Jasper County for the fiscal
year beginning July 1st, 2023 and ending June 30th 2024 and to make appropriations for said purposes; to
adopt and approve the Jasper County capital and operations budget for fiscal year 2023-2024, to adopt
Minutes -
05.15.2023
and approve the Jasper County School District capital and operations budget for fiscal year 2023–2024; to
provide for the levy of taxation for fiscal year 2023–2024. Ms. Burgess noted that there would be a
budget workshop next week and noted the changes to the budget. The public hearing was opened but
there were no comments, so the public hearing was closed.
Motion to approve: Vice Chairwoman Clark
Second: Councilman Kemp
Vote: Unanimous
The motion passed.
12. Russell Wells – Presentation, discussion and consideration of the 1st reading of an Ordinance
Amending Chapter 9, CIVIL EMERGENCIES, by creating new Divisions, adopting restrictions and
conditions regarding open burning of vegetation, leaves, and other materials, and matters related
thereto.
Chief Wells was present to address and review this item with Council. He noted that this item was before council
for the first reading of this ordinance which would amend Chapter 9, Civil Emergencies, that creating new divisions,
adopting restrictions and conditions regarding open burning of vegetation, leaves, and other materials.
Motion to approve: Councilman Kemp
Second: Vice Chairwoman Clark
Vote: Councilman Kemp: Yes
Councilman Adkins: Yes
Vice Chairwoman Clark: Yes
Chairman Sauls: No
Councilman Garbade: No
The motion passed.
13. Lisa Wagner - Public Hearing, discussion and consideration of the 2nd reading of Ordinance
#O-2023-10 to amend the Official Zoning Map of Jasper County so as to transfer a property located at 323
School Road, bearing Jasper County Tax Map Numbers 015-01-00-012 from the Residential Zone to the
Community Commercial Zone on the Jasper County Official Zoning Map.
Ms. Wagner was present to address and review this item with Council. She discussed the consideration of
the 2nd reading of Ordinance #O-2023-10 to amend the Official Zoning Map of Jasper County so as to
transfer a property located at 323 School Road, bearing Jasper County Tax Map Numbers 015-01-00-012
from the Residential Zone to the Community Commercial Zone on the Jasper County Official Zoning Map.
The public hearing was opened but there were no comments, so the public hearing was closed.
Motion to approve: Councilman Adkins
Second: Councilman Kemp
Vote: Unanimous
The motion passed.
_______________________________________________________________________________________
CITIZEN COMMENTS
_______________________________________________________________________________________
Minutes -
05.15.2023
14. Open Floor to the Public per Ordinance 08-17 Any citizen of the County may sign to speak in person at
the Council Meeting (before the Council Meeting’s 6:30PM start time on the Sign In Sheet on the
Podium), to address Council on matters pertaining to County Services and Operations. Presentations will
be limited to three (3) minutes per person and total public input will be limited to 30 minutes.
Chairman Sauls noted that the floor was open to the public for public comments and called the following
persons that had signed up to speak to the podium:
Joyce Gerald – Not present to speak.
Russell Zimmerman – Not present to speak.
Habibah Ismael – Ms. Ismael had questions regarding the lawsuit of Jasper County versus Alvin Adkins, and
noted that it said “Jasper County” and asked who brought the charge if only 2 Councilpersons were the only
ones against it. Chairman Sauls asked her to get with the Administrator and County Attorney.
NAACP Ridgeland Branch – President Reverend Harris noted their request for a referendum to the Council.
Rev. Donald Sheftall asked that the Council call for a Referendum.
Grant McClure was present to discuss Item # 9.
_______________________________________________________________________________________
15. Administrator’s Report
Mr. Fulghum discussed with Council that he was present to review his Administrator’s Report to Council if they
had any questions.
_______________________________________________________________________________________
CONSENT AGENDA
_______________________________________________________________________________________
16. David Tedder – Consideration of the 3rd reading of Ordinance #O-2023-07 to amend
Chapter 6 of the County Code of Ordinances (Buildings and Building Regulations) to Update References,
Fees and Matters Related Thereto (1st reading 04.21.2023; Public Hearing held 04.17.2023; 2nd reading
05.01.2023).
17. Danny Lucas – Consideration of the Ridgeland Airport Entrance LED Lighting Agreement.
18. Lisa Wagner – Consideration of Resolution #R-2023-07 to adopt the Planning Fee Chart.
19. Wanda Simmons – Consideration of an appointment to the Library Board of Trustees.
20. Kimberly Burgess – Consideration of Resolution #R-2023-08 ratifying the submittal of an application to
the South Carolina Rural Infrastructure Authority and the acceptance of the resulting grant in the amount of
$1,827,338 for drainage improvements; and other matters thereto.
21. Russell Wells – Consideration of the 3rd reading of Ordinance #O-2022-39 Authorizing Certain
Amendments, Modifications and Changes to the County’s Code of Ordinances; Authorizing the Execution and
Minutes -
05.15.2023
Delivery of a Consolidated Fire Service Agreement Between Jasper County, South Carolina and Levy Volunteer
Fire Department; Authorizing the Appropriation of County Funds Under the Terms of Such Agreement; and
Other Matters Relating Thereto. (12.05.2022 1st reading; 01.17.2023 2nd reading).
This item was moved under section Public Hearings and Action Items and made as Item # 9A.
22. Russell Wells – Presentation and consideration of a proposal for acquisition of EMS Patient Transport
Utility Vehicles.
This item was moved under section Public Hearings and Action Items and made as Item # 9B.
23. Kimberly Burgess – Consideration of Resolution #R-2023-06 to authorize the award of funds for the
requests for Local Accommodations and Hospitality Taxes for FY23-24.
24. Kimberly Burgess – Consideration of a Contract Change Order # 6 for Cumming Management
Group Inc. for the project management of Marsh Cove Fire Station.
25. Approval of the minutes of 04.03.2023.
Motion to approve the Consent agenda: Councilman Kemp
Second: Councilman Adkins
Vote: Unanimous
The motion passed.
_______________________________________________________________________________________
END OF CONSENT AGENDA
_______________________________________________________________________________________
Council Members Comments:
Chairman Sauls welcomed Councilman Garbade back and said they had been keeping them in prayer.
Vice chairwoman Clark had no comments.
Councilman Adkins had no comments.
Councilman Kemp stated that he had attended the Mental Health Open House on Friday, that he had attended
the Beaufort Jasper Higher Education meeting at USCB, that he had toured the new ambulance, that he had
went with the Sheriff on his quarterly ride along, and he congratulated all graduates.
Chairman Sauls offered his congratulations to all graduates and noted that the Chamber has several
scholarships; he attended the dedication of the Hardeeville Turf Field for David Spisso with Councilman Kemp;
he attended the dedication to the Butler family; had attended the BJWSA Meeting; and he also noted that he
had ridden with the Sheriff and that it was certainly an eye opener seeing what they face everyday.
Minutes -
05.15.2023
Possible Return to Executive Session to Continue Discussion on Matters Regarding Agenda
Item II.
There was no reason to return to executive session for this meeting. For additional information on
Items on this meeting go to https://www.youtube.com/channel/UCBmloqX05cKAsHm_ggXCJlA .
Adjournment:
Motion to adjourn: Councilman Adkins
Second: Vice Chairwoman Clark
Vote: Unanimous
The motion passed and the meeting adjourned.
Respectfully submitted:
_______________________________________
L. Martin Sauls IV
Chairman ________________________________________
Wanda H. Simmons
Clerk to Council
Source: Jasper County website. First collected Nov 10, 2026.