hp_21-09-80_calhoun_place.pdf
City of Sumter · Sumter County · Other
Open the original document More from City of Sumter
This document is no longer listed on City of Sumter's website. We kept the copy we read.
Text
Extracted automatically from the original. Tables and formatting may not survive; the original document is authoritative.
City of Sumter Historic Preservation
Design Review
April 22, 2021
HP-21-09, 80 Calhoun Pl.
I. THE REQUEST
Applicant: Dennis Kern
Status of the Applicant: Authorized Agent for Property Owner
Request: Request for Design Review approval for
construction of an 1,840 SF single family home
with attached two-car garage and roof mounted
solar panels.
District Hampton Park Historic District
Location: 80 Calhoun Place
Present Use/Zoning: Undeveloped Residential / PD
Tax Map Reference: 228-81-01-008
Adjacent Property Land Use
and Zoning:
North – Single-Family Residence / PD
South – Single-Family Residence / PD
East – Single-Family Residence / PD
West – Duplex Residence / PO
II. BACKGROUND
The applicant is requesting D esign Review
Approval for an additional/al ternate
architectural design plan for one of four (4)
single-family detached residential structures to
be located along Calhoun Place off of W.
Calhoun St. This property originally received
HP Design Review approval in 2008 (HP -08-
13) with four (4) unique but complementary
designs identified for the four (4) lots to be
developed. The request was later amended
and approved for a n alternate design for the
parcel located at 10 Calhoun Pl. The
2
development and is a residential infill project within the Hampto n Park Historic
District.
ARCHITECTURAL/HISTORIC CONTEXT:
Under a plan approved in 1991 , the property formerly known as 315 W. Ca lhoun St.
was to be developed for 8 single -family detached units , each on its own parcel. 2 of
the original 8 parcels, locat ed at the rear of the site, were developed prior to the
adoption of the current d esign guidelines manual and more closely resemble
contemporary residential structures commonly found in new subdivisions rather than
in the Hampton Park Historic District.
Since approval of the 1991 development plan,
new guidelines were adopted that emphasize
design standards more compatible with the
existing character of Hampton Park. The
third residen ce constructed in the
development obtained design review approval
in 2008, based on an alternate design to those
approved in 1991 that was more in keeping
with the architectural character and context
of the District.
The site plan to the right shows how the
remainder of the parcel was subdivided
following construction of the two residences at
the rear of the site. As a condition of the
planned developmen t, the residence s placed
on lot s #1 and # 8 must be oriented towards
W. Calhoun S t. This request is for Lot # 8
(highlighted in yellow ). Each of the
architectural designs planned for this
development have been selected in an effort to
compliment the Hampton Park district while
providing adequate floor area.
There are no c ontributing structur e to the
National Register Historic District -eligible
Hampton Park Historic District or City-
designated Hampton Park Historic Overlay
District currently on the site.
3
SITE PHOTOS:
The following photographs show the existing site and the previously constructed
adjacent dwelling located at 10 Calhoun Pl.
Site Front (south) as viewed from Calhoun St. Site as viewed from intersection of Calhoun St.
and Calhoun Pl.
Site Rear as viewed from rear Site Side (east) as viewed from rear
70 and 80 Calhoun Pl. as viewed from rear of
Calhoun Pl.
Existing residence at 10 Calhoun Pl.
4
Original Design Approval
The following elevations show s the primary façade and visible secondary facade for
Lot #8 (80 Calhoun Pl.), as approved under HP-08-13.
Left: The current design approved for 80 Calhoun Pl.
includes one dormer on the second story, 4-over-4
window configuration, traditional front door with
transom and front/side wrap-around porch. Proposed
roofing material will be architectural shingle. The
siding would be fiber cement siding with embedded
color, and a brick foundation.
Below: The right side of the structure is oriented
towards Calhoun Place. M ore contemporary elements
such as the attached garage would not be readily visible
to passing traffic on W. Calhoun St.
5
Proposed Design
The following elevations show s the revised façade and visible secon dary facade for
Lot #8 (80 Calhoun Pl.), as proposed by this request.
Isometric Rendering of Proposed Design
The front elevation (above) proposed structure has cross-gable ends with horizontal siding, 4-
over-4 side by side window configuration, front door and front/side wrap-around porch with
two column supports. Proposed roofing material will be black arc hitectural shingles . The
proposed siding will be fiber cement siding (hardie plank) painted Honed Soa pstone (SW
9126). The foundations will be constructed of brown brick. The rear elevation shown on the
next page continues with horizontal lap siding and features a single paned window on the left
side.
6
The right elevation (above) as shown below will be oriented towards Calhoun Place (east).
The more contemporary elements such as the attached garage will not be readily visible to
passing traffic from W. Calhoun St. The design features a bay window configuration which
provides additional windows and a roof configuration which breaks up the plane of the
building.
The left elevation (above) will be oriented to the west. It features a re cessed screen -porch
entrance.
The rear elevation (above) continues with horizontal lap siding. The applicant has indicated
windows, though staff would be supportive of no windows on this elevation.
7
The proposed Floor Plan illustrates the recessed front porch, recessed screen porch on the
left elevation and proposed room configuration.
8
PROPOSED SCOPE OF WORK:
The proposed project includes construction of a new 1,8 40 sf single -family dwelling
with attached two-car garage.
Paint Colors:
The applicant is proposing to pa int all trim White (ex act shade has not been
provided), and all building walls Honed Soapstone (SW 9126) . Black Shutters (exact
shade has not yet been provided) are proposed for the front façade windows.
Design review approval is required prior to undertaking the proposed changes.
DESIGN REVIEW:
Design review approval is required prior to the proposed work. The Design Review
Guidelines Manual states:
6.2 New Residential Construction
A. Design New Buildings to Reflect Their Own Time
Avoid the direct imitation of a historic style that would blur t he distinction between old and
new.
Avoid any reference to historic styles that precede the growth and development of the
district.
B. Incorporate the principal elements of the traditional residential structures into the design of new
house.
Staff Analysis:
The proposed structure is a simple, straightforwa rd design that draws inspiration from
elements of shotgun -style houses. While it lacks the shotgun-style floor plan, the entire
structure, including the attached garage, is perpendicular to the street, a nd follows the
slim profile characteristic of the style.
By altering the floorplan and incorporating more modern materi als, the structure avoids
conveying a fal se historic character, and will be easil y identifiable as a non - historic
structure.
9
The principal design element that the newly proposed structure borrows from traditional
residential design is the inclusion of a covered front porch. This serves to concen trate
visual interest to the front of t he structure and ensures tha t the design keeps a human
scale.
The proposed design also modifies a traditional design element of residential structures in
the area through the inclusion of a side loading attached gar age. Garages in the
Hampton Park area are typically detached or not present on the site at all. In this design,
the garage is built flush with the structure, and is designed to appear to be a continuation
of the residential dwelling. By not including a s econdary structure, this design seeks to
preserve the dwelling as the primary visual focal point.
Setback, Orientation, and Spacing
C. Relate the Setback, Orientation, and Spacing of New Construction to that of Existing
Buildings.
Align new construction with the setback established by adjacent houses while
conforming to zoning requirements. This w ill include alignment of the front elevation
and porch face.
Establish an average setback if the setbacks of adjacent houses are inconsistent.
Maintain average side yard setbacks based on adjacent houses and adhering to
applicable zoning regulations.
Orient the primary facade to the major street onto which the lot faces.
Staff Analysis:
The proposed structure meets the Design Review guidelines for setback, orient ation,
and spacing in relation to existing buildings.
Size, Scale, and Massing
D. Develop Respectful Relationships in Terms of Size, Scale, and Massing to Adjacent Historic
Buildings
Use an appropriate form and massing for new construction that relates to the majority
of surrounding buildings.
Reflect the widths of adjacent buildings in new const ruction. Generally, new
construction should not differ in width by more than 10 % from the typical buildings on
the street.
Reflect the heights of adjacent houses in new construction. Generally, new cons truction
should not differ in height by more than 10% from the typical buildings on the street.
Use floor to ceiling heights that are compatible with adjacent buildings to main tain
existing building proportions on the block. Appropriate floor to ceiling heights for new
construction are 8 to 10 feet.
Create visual interest at the ground level to emphasize the human scale of the building
by incorporating functional elements like traditional front porches.
Staff Analysis:
The proposed construction is a single- story configuration , which differs from the
previously approved design, which was a two -story configuration. The units to the
east and west of the proposed site are single -story configurations, though the roof
height of the duplex development to the west is steeper and higher than a ty pical
single-story construction, and includes dormers. The proposed plans d o not provide
10
similar visual interest to the existing approved designs or the implemented design for
10 Calhoun Pl.
As proposed, the single-family dwelling will be 32 ft. wide. Neighboring structures are
generally smaller in width at their front setback, but typically expand to larger widths
of 40-50 ft. throughout the building. The result of the applicant’s proposed layout is a
substantially thinner building than is typical in the area . To mitigate this effect , the
applicant has proposed a bay window config uration on the east façade that will
provide additional visual interest. However, due to the small lot size (55 ft. in width),
site developmen t overall is constrained to the thinner, less conventional shape and
design.
Roof Form
E. Choose Roof Forms for New Construction That Are Similar to Adjacent Historic Examples
F. Reflect the Roof Pitches of Adjacent Historic Houses in the Roof Pitch of New Construction.
Use a minimum roof pitch of 6:12 and a maximum roof pitch of 12:12 to facilitate
drainage. Intersecting roofs should have the same pitch as the main roof.
Devote a minimum of 8 inches for eave and gable overhangs.
Staff Analysis:
The applicant intends to utilize a roof pitch of 6:12, which is consistent with Design
Review Guidelines, and is similar in pitch to the home at 10 Calhoun Pl.
Foundation
G. Respect the Height and Contrast of Materials of Foundations on Adjacent Historic Buildings
Align foundation height of new construction with adjacent houses.
Ensure foundation height is within 10 % of the average foundation height of adjacent
houses.
Build a new foundation at least one foot above grade on the primary elevation.
Differentiate the foundation level from the main wall plane through a change in
material or texture.
Staff Analysis:
The proposed height of the foundation is consistent with those of adjacent residences,
is at least one foot above grade, and the proposed foundation level differentiation will
be accomplished through a change in material from brick to Hardie board siding.
Additional detail regarding the specific materials (brick and siding) is required to fully
analyze compliance with the Design Review Guidelines.
Porches
H. Incorporate a Porch on the Primary Elevation of New Residential Construction.
Ensure that the design, placement, and height of a porch is in accordance with those of
adjacent buildings on the block.
Design a porch to have a depth of at least 6 feet , although 8 to 10 feet is recommended to
create a usable space.
Use simple round or square columns of uniform shape and style with a base and a cap.
Aim for a minimum diameter of 6 inches and a maximum diameter of 10 inches.
11
Use simple square balusters with appropriate proportions and spacing.
Frame the underside of the porch with latt ice between pier supports and under the skirt
board.
Use enclosed stair risers for the front porch stairs.
Design the porch roof with a pitch equal or less than that of the main roof.
Staff Analysis:
The porch as submitted is 23 ft. wide, and six (6 ) ft. deep, with square wooden
columns. The roof is consistent in material with the roofing on the rest of the structure
but is at a significantly lower pitch than the dwelling’s primary roof.
The configuration of the porch is spatially similar to the previously constructed home
on the opposite side of Calhoun Pl , and conveys a similar, but dist inct visual and
architectural effect.
Window and Door Patterns
I. Arrange Windows and Doors to Reflect the Traditional Size and Proportion of Those on
Adjacent Historic Houses.
Keep new doors an d window openings within 10 % of the height and width of those on
adjacent historic buildings.
Proportion windows to be approximately twice as tall as they are wide.
J. Arrange Windows and Doors to Reflect the Spacing, Rhythm, and Alignment of Others in th e
District.
Locate the primary entrance of a building on the front elevatio n, oriented to the most
prominent street that borders the property.
Align windows vertically and horizontally.
K. Relate the Ratio of Solid Walls t o V oids (Windows and Doors) of New Houses to That of
Adjacent Historic Houses.
Avoid blank walls by covering a minimum of 20 percent of wall su rface between the
eaves and the foundation with window and door openings.
Avoid large expanses of glass or solid wall that convey a contemporary appearance.
L. Use Traditional Styles Found in the District as the Basis for New Doors and Windows.
Incorporate glazing, sidelights, and a transom into the designs of new entrances.
Use a pane configuration for windows that is compatible with other houses in the
district and that is consistent with the style of the house.
Avoid openings that are flush with the exterior wall. Openings are tradit ionally recessed
on masonry buildings and have a raised surround on frame buildings.
Scale shutters to fit the window opening and only use them when they are in keeping
with the style of the house.
Staff Analysis:
The arrangement of the windows and d oors is consistent with rhythm and spacing
found elsewhere in the district. The window openings for the structure are configured
to match the unconventional floor plan, and as a result are not uniform in location and
spacing like other homes in the district, though the intent of the Design Guidelines is
met.
12
The applicant intends to utilize a door with ov al glass glazing. While the door design
does incorporate glazing, it lacks the more decorative features of doors typically found
in the historic district, su ch as s idelights and transoms . Windows will be a vinyl
material consistent with many of the newer re placement wi ndows in the Hampton
Park area.
Architectural Detail and Ornamentation
M. Reinterpret Traditional Decorative Elements in a Contemporary Manner.
Incorporate simpli fied architectural features that reflect, but do not duplicate, similar
features found on existing historic buildings in the district.
Concentrate architectural detail in areas that traditionally featu red detail, such as floor
transitions, window surrounds, and cornices or pediments.
Use detail that is three dimensional to add visual interest and texture to the façade.
Staff Analysis:
The proposed architectural detail of the house is concentrated in the front elevation,
particularly on the porch . However, due to the orientation of the structure, the
eastern elevation of the structure will also be highly visible. The Design Guidelines in
this instance suggest for additional architectural detail in elements along the side of
the structure to create visual interest . The applicant is proposing to achieve this
result by incorporating a bay w indow on the east e levation, and has incorporated
additional elements on the front elevation, including porch balusters, as well as
vertical and horizontal siding.
Materials and Color
N. Choose High Quality and Durable Materials That Are Visually C ompatible With and
Complementary To The Architectural Character of the District and Surrounding Buildings.
Use brick or concrete for the foundation mate rial. If concrete block is used, it should be
painted or covered with stucco.
Use wood or brick for exterior wall cladding of new construction or additions.
Employ a uniform primary wall material on all sides of the building. Use of a li mited
number of different materials may be appropriate if a building is broken up into
separate masses.
Use horizontally oriented weatherboard, clapboard, or shiplap siding for frame
buildings.
Consider cementitious products, including shingles and siding , for new frame
construction if applied in a traditional pattern. Use the smooth side rather than the
grained surface and apply with a reveal that is consistent with historic precedents in the
district.
Use masonry units that are compatible in color, textur e, and size to thos e on adjacent
buildings. Mortar joints should be compatible in width, profile, and color.
Use traditional materials for trim, windows, doors, porches, and other decorative
features. Contemporary materials that are compat ible with histor ic materials may be
acceptable if the material conveys the visual qualities of traditional materials.
Consider traditional standing -seam metal or asphalt shingles . Pre -coated terne
products may be appropriate if manufactured in traditional widths and if installed with
standing seams.
O. Select a Coordinated Color Palette Informed by Histo ric Precedent and Compatible with
Adjacent Buildings and the District as a Whole.
13
Staff Analysis:
Additional detail regarding proposed colors and materials is required to fully evaluate
compliance with the Design Review Guidelines.
III. STAFF RECOMMENDATION:
Staff recommends approval of this request.
While the proposed design for 80 Calho un Pl. represents a major alteration from the
previously-approved de signs for the Calhoun Plac e development. T he proposed
structure generally meets the requirements set forth in the design review guidelines.
Distinct fro m virtually all previous infill development in the District, this proposal
makes a strong and successful effort to capture historic orientation and architectural
elements of traditional early to mid -twentieth century shotgun houses while the
construction is clearly modern in style and would not be confused with historic
structures
IV. DRAFT MOTION
1) I move that the City of Sumter Design Review Board defer action on HP-21-
09.
2) I move that the City of Sumter Design R eview Board approve HP-21-09 in
accordance wi th the ma terials, photographs, a nd construction details
submitted and referenced in the Staff Report based o n compliance with Design
Review Guidelines.
3) I move that the City of Sumter Design Review Board deny HP-21-09.
4) I move t hat the City of Sumter Design Review Board enter an alternative
motion.
V. DESIGN REVIEW BOARD – April 22, 2021
Source: City of Sumter website. First collected Nov 14, 2026.