hp_20-09_rev_1-129_n_washington_st-city_003.pdf
City of Sumter · Sumter County · Other
Open the original document More from City of Sumter
This document is no longer listed on City of Sumter's website. We kept the copy we read.
Text
Extracted automatically from the original. Tables and formatting may not survive; the original document is authoritative.
City of Sumter
Historic Preservation Design Review
April 28, 2022
HP-20 -09 (REV 1), 129 N Washington St. (City)
I. THE REQUEST
Applicant: SSOE / Stevens & Wilkinson
Status of the Applicant: Project Architects
Request: Approval for construction of a +/- 26,500 sq. ft.
hospital addition.
Location: 129 N Washington St.
Present Use/Zoning: Hospital / CBD
Tax Map Reference: 228-12-04-001 & 228-12-04-007
Adjacent Property Land Use
and Zoning:
North – Commercial / CBD
South – Commercial/ CBD
East – Government Services/ CBD
West – Hospital / CBD
II. BACKGROUND
129 N. Washi ngton St ., shown in
the photograph to the right , is the
site of Prisma Health Tuomey
Hospital.
In 2020, the applicant sought and
obtained Design Review approval
for a proposed emergency room
addition to the existing structure.
This request is a revision to that
project, which revises the
configuration of the addition. The
revised development proposal
shows a new +/- 26,500 sq. f t.
emergency room ad dition to the
eastern portion of the existing
2
structure near the intersection of N. Main St. and Canal St.
ARCHITECTURAL/HISTO RIC CONTEXT:
The hospital at 1 29 N. Washington St was not identified in the 1985 Historical Resources Survey.
While there has been a hosp ital use on the site si nce at least 1940, no portions of the ori ginal
structure remain due to piecemeal demolition and redevelopment of the site. Based on information
obtained from the Sumter County Assessor ’s Office Property Cards, the e astern portion of the
structure that will be receiving an addition was constructed around 2006.
While this use i s vital to the he alth a nd well-being of the community, it is not considered a
contributing structure to the District.
SITE PHOTOS:
Following is a photograph of the portion of the structure slated for expansion.
Above: View of the existing emergency room front (N. Main St. façade)
SCOPE OF WORK:
The proposed project includes an addition to 129 N. Main St., as follows:
1. Construction of a +/ - 26,500 sq. f t. emergency room addition w ith red brick masonry,
aluminum windows, and aluminum accents and roofing.
3
Graphic renderings and plans provided by the applicant showing the scope of the proposed work
are shown on the following page, with the proposed addition highlighted in red.
Above: East-Facing elevation detailing the view from N. Main St. (Alternative 1)
Above: East-Facing elevation detailing the view from N. Main St. (Alternative 2)
Above: South-Facing elevation detailing the view from Canal St.
4
Above: North-Facing elevation from the hospital access drive
5
Above and Previous Page : Photometric rendering of proposed design;
6
Above: Proposed site landscaping plan
7
DESIGN REVIEW:
Design review approval is required prior to the proposed work. The Design Review Guidelines Manual
states:
6.1 New Construction and Additions : Commer cial Proper ties
A. Design new buildings to reflect their own time.
Avoid the direct imitation of a historic style that would blur the distinction between old and new.
Avoid any reference to historic styles that precede the growth and development of the district.
B. Incorporate the Principal Elements of Traditional Commercial Façades into the Designs of New Buildings.
Integrate the design features of contemporary storefronts on the first floor. Use contemporary materials to avoid cre ating a
false historic appearance.
Delineate between the storefront level and upper floors with elements of horizontal expression, such as canopy, belt course,
steel lintel, or cornice.
Use vertically proportioned upper story windows in a regular pattern and appropriate ratio of solid wall to window area.
Provide visual termination at the top of the building with a cornice, parapet, pediment, or other decorative feature.
C. Reinforce the Street Wall by Relating Setback, Orientation, and Spacing of New Construction to that of Existing Buildings.
Align new commercial construction with the property line without setbacks or side alleys.
Minimize gaps in the street wall.
Allow deeper setbacks with landscaped areas or pocket parks only for buildings constructed on the edges of the dist rict or
for new governmental or institutional buildings where appropriate to emphasize their civic function.
Orient the front of a new building to the primary street onto which the lot faces.
D. Develop Respectful Relationships in Terms of Size, Scale, and Massing to Adjacent Historic Buildings.
Construct new buildings that are similar in height and width to adjacent buildings. These proportions may vary
depending on the character of each block.
Reduce the perceived mass of a large new building by dividing its height or width into smaller masses that relate to the
proportions of adjacent buildings.
Step back or cascade portions of new buildings that are taller than adjacent bu ildings away from the street front to
maintain the traditional range of heights at the street edge.
Relate the base of a new building that is significantly taller than its neighbors to the heights of adjacent buildings.
Preserve view sheds for significant local focal points, as well as major streets and pedestrian pathways.
E. Establish an appropriate scale for new buildings that is compatible with the character of the district.
Reflect the widths and bay divisions of other historic buildings along the block.
Incorporate evenly spaced vertical divisions to divide a wide building into bays of appropriate widths to reduce the scale.
Avoid the use of strong horizontal lines, especially for buildings that exceed the average width of adjacent buildings on
the block.
Create visual interest at the ground level to emphasize the human scale of the building by in corporating functional
elements like traditional storefronts and entrances.
F. Choose a roof form that is similar to those of traditional commercial buildings in the historic district.
Avoid roof types that become prominent visual features
of the building.
Use a parapet wall to screen satellite dishes or rooftop mechanical equipment.
G. Arrange windows and doors to reflect the traditional size, proportion, spacing, rhythm, and alignment of others in the district.
Keep the proportion of window to wall area for both upper and lower facades compatible to that of existing buildings.
Incorporate a ground floor storefront into the design of a new buil ding. A contempo rary design can be appropriate if
based on traditional storefront features and if it is compatible with the visual character of the district.
Orient the primary entrance of the building to the street.
Recess the main entrance if it continues an established pattern on the block.
8
Continue the general alignment, spacing, size, profile and proportion of the upper floor windows of adjacent buildings in
new construction.
Use traditional styles found in the district as the basis for new doors and windows.
H. Reinterpret traditional decorative elements in a contemporary manner.
Incorporate simplified architectural features that reflect, but do not duplicate, similar features found on existing historic
buildings in the district.
Concentrate architectural detail in areas that traditionally featured detail, such as floor transitions, window su rrounds,
and cornices or pediments.
Use detail that is three dimensional to add visual interest and texture to the façade.
I. Choose materials that are harmonious with traditional materials found in the historic district.
Select materials that are visually compatible with and complementary to the architectural character of the district and
surrounding buildings.
Use high quality materials with proven durability in the local climate.
Choose materials with a similar scale, color, texture, and finish as those used historically in the district.
Contemporary materials that are compatible with historic materials may be acceptable if the material conveys the visual
qualities of traditional materials.
Employ a uniform primary wall material on all sides of the building. Use of a limited number of different materials may
be appropriate if a building is broken up into separate masses.
J. Select a coordinated color palette informed by historic precedent and compatible with adjacent buildings and the district as a whole.
K. Distinguish a new addition from the historic building with a simple and unobtrusive design.
Design an addition to be subordinate to the existing building in size, design, and detailing.
Locate a new addition on the rear elevation where it will not be highly visible from the public right-of-way.
Design rooftop additions so not to be visible from the street and to be minimally visible from other vantage points in the
district by setting them at least one full bay back from the primary elevation and other street walls.
Devise a distinct but compatible appearance if an addition has its own street frontage.
Include simplified architectural features derived from similar features on the historic building.
Base the size, rhythm, and alignment of the window and door openings on those of the historic building.
Ensure that colors and materials are harmonious with the materials of the historic building.
L. Avoid obscuring or destroying important features or materials of the existing building when constructing an addition.
M. Design and construct an addition so if removed in the future the basic form and character of the original building remain intact.
Staff Analysis:
Building Design
The existing hospital complex, as well as the proposed addition are architecturally compatible with the
rest of the hospital complex, a distinct architectural style which distinguishes it from the existing historic
structures in the downtown district. While the applicant’s design is modern, it does incorporate some of
the same design elements of tra ditional storefronts. The structure delineates the entrance through a glass
and aluminum entranceway which replicates the visibility of traditional storefronts.
The des ign also utilizes a ca nopy to make the structure more accessible a nd i nviting to pedestrians,
however the structure opts for a modern, flat metal design consistent with other portions of the hos pital
complex.
Setback, Orientation, and Spacing
Unlike the vast majority of development w ithin the Downtown Design district , the Hospital was not
developed at the front setback area and the existing building is set back approximately 200 ft. from the N.
9
Main St. proper ty li ne. This recesse d pattern of development is dic tated by the unique nature of the
hospital use, which requires dedicated parking and vehicle drive-thru and has speci fic requirements for
emergency vehicle access. While the new addition to the building will not be located as close to the street
as other buildings on N. Main St., it will bring the front of the building significantly closer to the street,
and will reinforce the stre etscape through the preservation of existing street trees, and the incorporation
of additional tree and shrub plantings along N. Main St.
Size, Scale, and Massing
The existing eastern portion of the hospital structure is three stories in size, and is set back significant ly
from the rest of the buildings on N. Main St. The proposed addition will be one story in size and will
extend closer towards Main St, resulting in a cascading effect which will bring the structure down to a
more pe destrian scale. This propo sed expansion will be located far enough away from the taller
commercial devel opment to the south that the height differences between the differing patterns of
development will not be immediately apparent.
Roof Form
The proposed plans detail a flat aluminum roof to match the appearance of roof elements throughout the
hospital complex. The rear p ortions of the roof area will b e used t o house utilit y and mechanic al
equipment but will not be easily visible from the rig ht of way on W. Canal St. or N. Main St due to the
implementation of a rooftop parapet wall.
Window and Door Placement
The submitted plans detail numer ous f irst floor w indows. While th e windows located on the corner
facing Canal St. and the north facing windows are generally analogous to existing windows on the
hospital complex, the applicant is proposing a change to the originally approved plans that results in a
different style window opening , due to the location of the examination rooms in the facility . The
applicant has provided two alternative design concepts for Board Review:
Alternative 1 would consist of a window opening with a transom-style opening at the top, and brick
infill at the bottom. This alternative would rely on landscaping (Sabal Palmettos and loropetulum
shrubs) to accent the N. Main St.-facing wall and mitigate the effect of the unusual window design.
Alternative 2 would consist of the same transom- style opening, but in stead of brick infill at the
bottom, spandrel glass would be used to create the effect of a full window opening.
Decorative Elements
The original structure being expanded is minimally ornamented. The plans for the new structure continue
this minimalist aesthetic with clean lines, and architectural/visual interest being created through materials
transition resulting in a more modern aesthetic.
Materials
The materials and design of this emergency room expansion are designed to match the appearance of the
existing struc ture in order to create a seamless expansion to the building. The colo r of the masonry,
window material and finish, and finish of metal trim will be coordinated with the existing structure, which
will result in a modern look that does not attempt to convey false historic character. This revised plan
also proposes to use fiber cement panels in a style and color to match existing EIFS fiber cement systems
used in the existing hospital complex.
Colors
The selected masonry will match the hospital’s existing red brick and stone and is not proposed to be
painted. The aluminum wi ndows and trim will also m atch the light finish of the al uminum system s
throughout the existing building, and the fiber cement panel ing used for the main entry area will be a
light grey to match the existing building The result will be a neut ral color structure that appears to be a
continuation of the existing structure.
10
4.12 Signs and Awnings
A. Place Signs in a Manner that is Complementary, or Subordinate to, the Architecture of the Building.
Locate signs on flat, unadorned areas, such as horizontal sign bands, existing signboards, or vertical piers.
Place signs at or below the storefront cornice for a ground level business.
Position permissible portable signs so that they do not interfere with pedestrians or traffic sight lines at intersections.
Pylon, monument, and other freestanding signs are generally not appropriate in the Downtown Historic District. Wher e
determined appropriate, freestanding signs shall be monument style.
B. Limit the Size and Number of Signs per Building.
Limit sign area to less than 25 percent of the building front wall.
Relate sign proportions to the element on which it is placed.
Size the lettering and graphics of window signs to be clearly legible, but not block views into or from display windows.
Limit the size of transom signs to avoid blocking light to the interior or obscuring the transom glazing.
Use signs that are pedestrian oriented and of a scale comfortable for a walking customer.
C. Use Appropriate Materials that Complement the Style and Materials of the Building.
Use traditional sign materials (finished wood, glass, metal, brass letters) or contemporary products that have th e same
visual characteristics.
Finish sign edges to provide character and durability.
Limit the use of neon signs to the interior of buildings. Neon signs on building exteriors are not appropriate.
Shiny plastic products, including internally-illuminated, plastic box signs are not appropriate.
Avoid painting signs directly on unpainted masonry walls.
Use colors that complement the building, including accent and trim colors.
A maximum of three colors is recommended per sign, although more may be appropriate in some cases.
Use colors that relate to the overall color scheme of the building.
Use light or neutral colors on window signs—such as white or gold leaf—that are easy to read.
Minimize solid painted background behind window lettering, as it reduces transparency.
D. Design Signs to be Simple and Legible.
Keep sign message simple, easy to read, and in scale with the building and elements on which it is placed.
Avoid lettering that is difficult to read or overly intricate.
Use no greater than two or three distinct typefaces.
Consider the use of a symbol and logo rather than words.
E. Choose Simple, Compatible Lighting Fixtures to Illuminate Signs
Illuminate signs indirectly with a shielded light source
Install fixtures and associated wiring inconspicuously to avoid detracting from the appearance of the building and without
obscuring or damaging historic materials and features
Limit internal illumination to a system that backlights individual letters only.
Staff Analysis:
At this t ime, the only signage propose d for the si te is an aluminum wall sign on the eastern façade
denoting the entrance to the emergency room area. This will be similar in material and appearance as the
existing sign.
The proposed signage will be internally illuminated, and is consistent with the design review guidelines.
Any subsequent signage will require further Historic Preservation Design Review.
11
III. STAFF RECOMMENDATION
Staff re com mends conditional approval of this req uest, subject t o the Desig n Review Board ’s
review and acceptance of either of the front win dow configurations proposed, as noted in the staff
analysis section on page 9 of this report.
Pris
ma Health Tuome y Hospital is a speci alized use separ ate from but compatible w ith the
development occurring in the res t of the downtown district. The structur e being modified is not
historic in nature, and the proposed addition is compatible with the design of the current structure.
IV. DRAFT MOTION
1) I move that the City of S umter Design R eview Board approve HP- 20-09 (R EV 1) in
accordance wi th the materials, p hotographs, a nd construct ion de tails submitte d and
referenced in the Staff Report based on compliance with Design Review Guidelines.
2) I move that the City of Sumter Design Review Board deny HP-20-09 (REV 1).
3) I move that the City of Sumter Design Review Board enter an alternative motion.
V. HISTORIC PRESERVATION- April 28, 2022
Source: City of Sumter website. First collected Nov 14, 2026.