RecordWell Data

hp-25-06-17-21-n-main-st.pdf

City of Sumter · Sumter County · Other

Open the original document More from City of Sumter

This document is no longer listed on City of Sumter's website. We kept the copy we read.

Text

Extracted automatically from the original. Tables and formatting may not survive; the original document is authoritative.

City of Sumter Historic Preservation Design Review April 24, 2025 HP-25-06, 17 & 21 N. Main St. I. THE REQUEST Applicant: Tripper Lee Status of the Applicant: Project Manager Request: Design Review Approval to complete multiple façade alterations to include storefront replacement at 17 N. Main St., removal of the awning on 21 N. Main St., infill of the existing alley to connect the two buildings, addition to the rear of 17 N. Main St., new exterior paint, and associated site improvements at the rear of both buildings. District Downtown Design District Location: 17 & 21 N. Main St. Present Use/Zoning: Opera House / CBD Tax Map Reference: 228-12-05-009; 228-12-05-010 Adjacent Property Land Use and Zoning: North – Commercial / CBD South – Commercial / CBD East – Parking Lot / CBD West – Commercial / CBD II. BACKGROUND 21 N. Main St ., shown in the photograph to the righ t, is known as the Sumter Opera House. 17 N. Main St. also shown in the photograph to the right, is known as the Drucker & Bultman Building. The Sumter Opera House is currently in the design phase for the 2 rehabilitation of the existing Opera House, the alley void to the South of the Opera House (SOH) and the rehabilitation of the original Ducker Bultman Grocery Store (DB) into the new expanded support space for the SOH front -of-house and the stage support expansion space necessary to create a new performing arts center for the region. ARCHITECTURAL/HISTORIC CONTEXT: The Sumter Opera House (21 N. Main St.) is identified as site #31 in the 1985 Historic Resources Survey that catalogued the structures in the downtown area. The building was constructed around 1893 in the Richardson Romanesque style . The façade is r ock faced masonry (Cumberland buff stone -ashler finish) with dark red mortar joints. The windows are featured by a combination of round arches and straight l intels of stone of a slightly different shade. The façade, typical of Richardson Romanesque style, has a sense of massiveness and gives the appearance of 3 vertical bays —the central bay containing the arched entrance, and topped by square towers; the left tower crowned by a pyramidal roof; and t he right tower, much taller than the left tower (at over 100 ft. high) . The right tower is also topped by a pyramidal roof supported by four round turrets which also support four steep- gabled wall dormers, each containing a round clock face. Figure 1 – Main Street Looking South (c.1923). Opera House and Drucker & Bultman Building in left foreground The Drucker & Bultman Building (17 N. Main St.) is identified as site #32 in the 1985 Historic Resources Survey that catalogued the structures in the downtown area. The building was constructed around 1887 and appears on Sanborn Maps in 1889. While it would appear that the existing structure was built around 1887, this was the site of Drucker & Bultman’s hometown grocers in 1876. At the time of the 1985 survey, the building façade was covered by aluminum panels that obscured the façade from view and analysis. Further analysis completed as part of the City’s current project has shed additional light on the nature of the building, both historically and in more modern context. 3 The primary historic façade was removed in 1970 for a modernization of the w est façade and several of the remaining window s and a door fenestration on the north and east (rear façade) were also changed by this time. During the last 54 years of this structure’s existence, it changed ownership twice prior to the City of Sumter purchasing the building The historic storefront of the Drucker & Bultman Building had a recessed entry which was located between the two central cast iron columns which made the entry slightly asymmetrical to the façade. The pair of doors were 6’0” wide, with a large operable transom above the doors. The entry doors and transom were supported by a pair of 4 x 6 wood columns on each side of the doors. The ghosting of the original diagonal storefront walls is retained on the ceiling in the central recessed area, however, all the display window and bulkhead construction below the central transom were removed in previous remodeling. The current aluminum storefront from the 1970s may have some ghosting behind the display window framing but none is currently visible. Both the Sumter Opera House and the Drucker & Bultman Building are within the boundary of Sumter’s Downtown National Register Historic District and of the City’s Downtown Design Review District and are subject to the Design Review Guidelines. Based on the age of the building s, their location, and their architectural design and features, both the Sumter Opera House and Drucker & Bultman Building are contributing structures to the city-designated Downtown Design Review District. Previous Design Review approvals have been issued for the Sumter Opera House via HP-08-21, HP -10-01, HP-10-11, HP-11-01, HP-11-21, HP-11-28, HP -11-29, and HP- 14-14. Previous Design Review approvals have been issued for the Drucker & Bultman Building via HP-00-38, HP-05-07, HP-06-18, HP-09-27, and HP-11-19. Figure 2: Rectified photograph and the enlargement showing storefront façade change on the first floor (ca. 1950) 4 SITE PHOTOS: Above: Drucker & Bultman front (west) façade prior to exploratory demolition, viewed from N. Main St. Above: Current alley front (west) façade condition, viewed from N. Main St. Above: Opera House rear (east) façade, viewed from rear parking lot. Above: Drucker & Bultman rear (east) façade, viewed from rear parking lot. 5 SCOPE OF WORK: The proposed project includes renovations to the exterior of 17 and 21 N. Main St., as follows: 21 N. Main St. – Sumter Opera House The front facade will essentially remain intact. General maintenance will be part of the rehabilitation but the only physical modification to the front facade will be removal of the existing arched canvas awning (1984) over the central entry doors. The existing awnings will be removed, and a structural steel supported canopy will be cantilevered out from suspected steel structure for the triangular marquee. The canopy will extend approximately 6’- 6” from the façade of the building. The rear facade reflects the 1984 remodeling of City Hall and a large portion of this façade w ill be retained. The adjacent alley to the s outh will be incorporated into a new two -story connector between the Opera House and the Ducker Bultman Annex. This space will become a two- story circulation spine connecting the front lobby with the rear stage entry door that faces east to the parking lot. The roof of the stage annex will be extended to the south to provide waterproofing and a roof overhang for the stage door which will be the main entry into backstage for performers and staff of the Opera House. The Opera House will also have a backup natural gas generator that would allow City Hall to function as an Emergency Operation Center when required. The generator will be able to keep the city operations functioning in an emergency. The generator will be placed northeast of the city hall in the rear parking lot. The generator will sit where the current trash dumpster is located. Summary of Proposed Alterations to 21 N. Main St.: • Remove existing front canvas canopy • Install a new flat front canopy • Extend rear roofline to connect to Drucker & Bultman building rear addition. 17 N. Main St. – Drucker & Bultman Building The front façade will be rehabilitated into the Sumter Opera House main entry. The intent is to interpret the physical historic fabric found in the structure and rehabilitate the exterior and interior of the façade and lobby entrance to reflect the rhythm and proportions of the building over the 60+ years of occupa ncy and use as a grocery store as much as possible to remain intact. The alley situated between the Sumter Opera House and the Drucker & Bultman Building will be utilized as a transitional space to physically connect the two buildings and to allow infrastructure to utilize this space to provide heating, air conditioning, electrical and AV distribution to occur horizontally 6 north to south and east to w est. The intent is to retain the historic alley walls along with the assorted color infilled brick utilized for closing openings and scars from previous construction in order to interpret the alley as it was historically. The space will be enclosed utilizing a glass façade wall on the West façade recessed behind the Opera house façade and the Drucker & Bultman façade. The rear façade will be altered with an addition to the building that will extend to a similar depth to the existing rear wall of the Sumter Opera House. A ll four of the east -facing second floor windows are severely deteriorated and cannot be restored. The upper portion of this second-floor masonry façade also needs brick repair and some restoration of severely deteriorated brick parapets. As indicated in the rendering of th e loading dock, the parapet wall will be extended upward to reduce the impact of the compressors and condensing units. Summary of Proposed Alterations to 17 N. Main St. • Replace storefront • Infill existing alley with connecting structure to 21 N Main St. • Infill existing rear windows • Construct rear addition The renderings, elevations and plans displayed on the following pages show the proposed changes and new construction. Figure 3 - Site Plan Diagram 7 West Elevation (Facing N. Main St.) Figure 4 (Above Left): The alley between Sumter Opera House and Ducker & Bultman will be infilled and the façade recessed to retain the original rhythm of the street facades. The glass façade is attached to the concrete floor structure of the infill and interior walls on each side of the alley will retain the historic brick walls on the north and south sides of the alley. Figure 5 (Above Right) : The Sumter Opera House will have a new entry through the existing Ducker Bultman facade. Rendering shows the façade with fabric awning and renders the display storefront with the full appearance of bulkheads, display windows, and recessed entry doors. 8 Figure 6: The Ducker Bultman Building will be rehabilitated into the Sumter Opera House main entry and become the primary entry into the performing arts center. The intent is to interpret the physical historic fabric found in the DB Building and rehabilitate the exterior and interior of the façade and lobby entrance to reflect the rhythm and proportions of the building over the 60+ years of occupation and use as a grocery store. 9 East Elevation (Facing N. Harvin St.) Figure 7 (above left): The upstage support structure reuses the former Water Department for new ADA dressing rooms for the stage and allows the central hall to retain access to the elevator for the Council Chambers on the 4th floor. Figure 8 (above right): The new stage door entry is recessed under the extended roof of the stage support structure (former Water Department ). This access controlled opening allows smaller performance groups to move equipment and instruments directly on to the stage through double stage entry doors. 10 Figure 9: This view shows the loading dock and mechanical mezzanine structure looking toward the Northwest. The large door on the second floor is designed to make maintenance and equipment replacement easier. The loading dock structure has an extended parapet height to reduce the impact of the HVAC chillers which will be placed on the steel roof structure of the loading dock building. The exterior walls are custom colored metal interlocking panels which form a drainage plane façade over an insulated sheathing and metal stud framing system. Proposed exterior paint colors are as follows: Window Trim/Cornices and Storefront Bulkhead – Restoration Ivory (SW-6413) Door and Storefront Trim – Kendal Green (SW-6467) Restoration Ivory SW-6413 Kendal Green SW-6467 11 DESIGN REVIEW: Design review approval is required prior to the proposed work. The Design Review Guidelines Manual states: 4.3 Exterior Walls: Masonry A. Preserve Original Masonry and its Visual Qualities.  Retain masonry features that are important in defining the overall character of the building.  Do not remove or obscure masonry elements.  Do not paint unpainted masonry. Exceptions to this include masonry walls that have a patchwork appearance from extensive replacement or rebuilding. B. Maintain historic masonry materials.  Prevent water damage to masonry by repairing leaking roofs, gutters, downspouts and flashing and by generally diverting water away from the building.  Clean masonry only when necessary to stop deterioration or to remove heavy soiling.  Use the least abrasive means possible to clean masonry. Steam cleaning or a low -pressure wash at a pressure below 500 to 600 psi is recommended. Use mild detergent where necessary. Conduct a test patch on a small, inconspicuous section of the building first.  Test detergents or chemicals on small inconspicuous sections of the building first.  Do not sandblast or use abrasive cleaning methods. C. Repair and replace historic masonry with in-kind materials.  Repair or replace a masonry feature using masonry units that respect the size, texture, color, and patterns of the historic material, as well as the mortar joint size and tooling.  Repair and repoint only areas where mortar has deteriorated, leaving sound mortar intact.  Repair cracks and unsound mortar with new mortar that matches the original in composition and appearance, including color.  Rake new mortar joints to match the originals. Staff Analysis: The project scope will focus on repairs and rehabilitation of existing masonry elements, as well as reconstruction of parapet walls (as shown on Figure 10). The brick repair is in general alignment with the Design Guidelines. 12 Figure 10 - Masonry Mortar and Brick Wall Repairs 4.5 Architectural Detail and Ornamentation A. Preserve and maintain architectural ornamentation.  Retain architectural ornamentation, including but not limited to cornices, eave brackets, spindles, vergeboard, frieze boards, knee braces, and exposed rafter tails.  Do not remove or obscure architectural ornamentation. B. Replace ornamentation with designs and materials to match the original.  Replace architectural ornamentation only when damaged or deteriorated beyond reasonable repair.  Match the profile, dimensions and materials of the original feature as closely as possible. C. Restore missing ornamentation based on photographic or physical evidence.  Do not apply ornamentation that has no historical basis, as it would create an appearance not in accordance with the building’s original design or style.  Consider a simple cornice of wood or metal on commercial buildings that have lost their cornice. Materials such as fiberglass reinforced concrete may also be appropriate. Staff Analysis: Architectural ornamentation helps to convey historic significance and style. Commercial buildings often feature elaborate cornices at their rooflines of metal, wood, or corbelled brick. The applicant is proposing to rehabilitate the Drucker & Bultman Building’s façade based on historical evidence , and to install new details which are consistent with the Design Guidelines. 13 4.6 Windows A. Preserve and Repair Historic Windows.  Retain historic windows that contribute to the historic character of a building, including functional and decorative features, such as frames, sash, muntins, mullions, decorative glass, sills, trim, surrounds, and shutters.  Repair original windows by patching, splicing, consolidating, weather stripping, caulking, and replacing missing glass.  Replace only those features that are beyond repair rather than replacing the entire window unit. For example, sash replacement may be a less costly alternative to a full window replacement. Match the original feature in design, dimension, and material.  Improve the thermal efficiency by securely locking windows, adding weather stripping, and installing interior or exterior storm windows.  Preserve original window locations, sizes, and types and restore altered window openings to their historic configurations. B. Replace Historic Windows with Compatible New Windows.  Replace historic windows only when damaged or deteriorated beyond reasonable repair or missing.  Match the original windows in design, dimension, muntin profile, pane configuration, finish and, where possible, material. If all of the original windows are missing, replacement windows should reflect a design appropriate for the building form and architectural style.  Avoid the use of false muntins, either internal or applied exterior grilles, which do not resemble the profile and depth of historic muntins.  Avoid reducing or increasing the size of a historic opening to accommodate a smaller or larger window. Where necessary, limit this treatment to the rear or side elevations not visible from the street.  Avoid elaborate stained glass or other decorative glass on the primary or visible secondary elevations unless there is evidence that these features existed historically. C. Maintain the Pattern and Rhythm of Original Window Openings.  Select an inconspicuous location for new window openings, such as the rear or side elevations not visible from the street.  Add new window openings in a manner that minimizes impact on historic features and subtly distinguishes them from historic windows.  Match the general size and alignment of original window openings when adding a new window opening.  Do not enclose or obscure original window openings with added materials. Staff Analysis: The applicant is proposing to replace the existing second story windows on the Drucker & Bultman façade. Because these front façade windows are not historic and improperly constructed it is recommended that they be replaced with historic profiles and detailed with double hung window operation made of aluminum and painted with high quality baked on finish. Further, as part of the addition to the rear of the Drucker & Bultman Building, the existing window openings will be closed. All window openings on the rear façade have received extensive water infiltration and have deteriorated beyond reuse. The applicant’s proposal to install the new windows is consistent with the Design Guidelines. 14 4.10 Storefronts A. Preserve and Maintain Original Storefronts and their Character-Defining Features and Materials.  Retain the historic storefront configuration, including the original location and size of the entrance doors, display windows, and transoms.  Retain storefront features that are not original, but have gained architectural and historical value.  Retain and repair historic structural components, such as decorative cast iron elements and stone or brick piers.  Retain and repair historic entrance doors and any distinctive hardware.  Retain and repair historic transoms, especially those with prism or leaded glass.  Retain and repair original wood or brick bulkheads. Also, retain elements such as Carrara glass or glazed tile that have gained historic significance in their own right.  Retain and repair the historic cornice or sign band, which delineates the storefront from the upper facade.  Protect historic features and materials by maintaining their historic protective finishes, such as paint or stucco. B. Replace storefront features that are missing or deteriorated beyond repair with compatible elements that match the original in design, dimension, texture, and material.  Replace display windows with new windows that fill the original opening and have wood, copper, or aluminum mullions. Dark anodized aluminum is preferred for new display windows rather than untreated aluminum frames. Untreated aluminum should be primed and painted if used.  Replace storefront glass with clear rather than tinted or reflective glass. Use an awning, canopy, or transparent low-E glass to reduce sunlight and heat gain.  Use wood or brick bulkheads for historic commercial buildings. Match brick bulkheads to the original brick of the building or paint them to complement other storefront elements.  Use wood doors with a single light of glass, as these are appropriate for most historic buildings in downtown Sumter. Metal doors with a dark bronze finish or an anodized aluminum finish may also be appropriate.  Use historic photographs and physical evidence to reconstruct a missing or insensitively altered feature, if documentation is available.  If photographs or physical evidence cannot be found, base the design on similar elements found on nearby historic properties, keeping the design of the replacement feature simple. C. Reconstruct a missing storefront to match the character, scale, and materials of the historic storefront.  Remove inappropriate materials covering the facade.  Conduct exploratory demolition to determine if any historic fabric remains and its condition.  Restore as many of the remaining historic elements as possible.  Use historic photographs and physical evidence to reconstruct a missing or insensitively altered storefront or feature, if documentation is available. D. Consider a simplified or contemporary interpretation of a traditional storefront where the historic storefront is missing or no evidence of it exists.  Base the new design on traditional storefront elements that reflect the scale, proportions, materials, and colors of other commercial buildings in the district.  Use compatible materials that are in keeping with the style of the building.  Avoid creating a false historical appearance by introducing architectural elements where they never previously existed. Staff Analysis: The applicant is proposing to replace the storefront at 17 N. Main St. with a design that interprets the physical historic fabric found in the structure and rehabilitate the exterior 15 and interior of the façade and lobby entrance to reflect the rhythm and proportions of the building over the 60+ years of occupation and use as a grocery store. Staff finds the proposed alterations to be consistent with the design guidelines. The portions of the storefront to be replaced are in severely deteriorated condition, and the proposed configuration is consistent with the general pattern of storefronts in the downtown area as shown in the graphic below. Figure 11: Anatomy of a Façade 4.11 Paint A. Maintain and repaint historically painted surfaces.  Remove paint from masonry only when the paint is not historic, will not reveal aesthetic issues, and will not damage the masonry.  Do not paint unpainted masonry walls unless insensitive past repairs have negatively affected the visual qualities of the masonry.  Do not strip paint or other coatings to reveal bare wood or apply a stain if the material did not historically have a natural finish. B. Select a Compatible Color Scheme.  Choose colors that are appropriate to the architectural style and complement the building and its surroundings. Overly bright and obtrusive colors are not appropriate.  Consider an original color scheme based on paint analysis or research. C. Use Paint Color to Accentuate Exterior Details.  Paint window and door sash and frames a contrasting color from the walls to provide contrast and depth.  Limit the paint scheme to three or four colors, one roof color, one wall color, one trim color, and one accent color. 16 Staff Analysis: During the November 2023 investigation on the Drucker & Bultman façade, dry scrapings were made of several areas which had significant paint build up over the last 130+ years. Based on the paint layers and the 1923 hand painted postcard two colors were selected to approximate the colors on the historic wood surrounding the trim on the south transom and colors associated with the cast iron columns. There were several repaint paint schemes over the years, but these schemes were relatively close. The photograph to the right shows an original cast iron color that appears to be several layers of a cream color followed by white, dark green, then light green and dark green (which may be a primer and finish coat). The wood trim around the original transom over the south entry door to the second floor appears to have a tinted first coat of medium green followed by a final coat of dark green. It is evident from the paint scrapings and the historic photographs that there were several façade remodeling projects over the years that Ducker & Bultman Grocery operated within the structure. The c.1923 hand painted postcard shows a color scheme very similar to the color scheme depicted in the paint scrapings. The building colors proposed are consistent with the City of Sumter Historic Preservation Color Palette, and the color scheme is compatible with the design guidelines. 4.12 Signs and Awnings K. Preserve and Maintain Historic Awnings and Canopies. L. Consider Traditional Awnings for Signage or Shade.  Size awnings to adequately fit commercial storefronts and window, door or porch openings of residential buildings.  Locate awnings on the transom bar or below the storefront cornice, above the transom, for commercial buildings.  Proportion the awning to allow for ample sidewalk clearance and projection over the sidewalk in downtown.  Choose an appropriate awning shape. Standard sloped awnings are appropriate in most cases, but circular or accordion designs can also be acceptable.  Choose appropriate awning fabrics, such as canvas, vinyl- coated canvas, and acrylic as awning materials. Metal and vinyl awnings are not appropriate.  Ensure the materials and colors are compatible with the design and color scheme of the building.  Consider using the awning valance as a sign panel for commercial buildings.  Consider retractable canvas awnings. Staff Analysis: The applicant is proposing to remove the existing canvas canopy from the Sumter Opera House and replace it with a structural steel supported canopy will be cantilevered out from suspected steel structure for the triangular marquee . The Drucker & Bultman Building will have canvas awnings installed for the storefront as well as over the second story windows on the front façade. T he size of the awnings are appropriate to the building, and the placement location will provide visual interest and functional use to the façade. The proposed awnings are consistent with the Design Guidelines. 17 While the applicant has not submitted detailed signage plans, Design Guideline- compatible signage would be appropriate in these locations and could be approved by staff under delegated authority provided that the signage meets the specified criteria regarding size, colors, and style. III. STAFF RECOMMENDATION: Staff recommends approval of this request. The proposed changes are consistent with the City of Sumter Historic Preservation Design Review Guidelines and are compatible with the existing building design. IV. DRAFT MOTION 1) I move that the City of Sumter Design Review Board approve HP-25-06 in accordance with the materials, photographs, and construction details submitted and referenced in the Staff Report based on compliance with Design Review Guidelines. 2) I move that the City of Sumter Design Review Board deny HP-25-06 3) I move that the City of Sumter Design Review Board enter an alternative motion. V. DESIGN REVIEW BOARD – APRIL 24, 2025

Source: City of Sumter website. First collected Nov 14, 2026.