hp_20-03_438_w-hampton_ave-city.pdf
City of Sumter · Sumter County · Other
Open the original document More from City of Sumter
This document is no longer listed on City of Sumter's website. We kept the copy we read.
Text
Extracted automatically from the original. Tables and formatting may not survive; the original document is authoritative.
Historic Preservation Design Review
February 27, 2020
HP-20-03, 438 W. Hampton St. (City)
I. THE REQUEST
Applicant: Patrick Enzor
Status of the Applicant: Authorized Agent for property owner
Request: Design Review approval for the construction
of a new single family dwelling with attached
rear garage
Location: 438 W. Hampton Ave.
Present Use/Zoning: Vacant/ R-6 (Residential-6)
Tax Map Reference: 228-11-03-035
Adjacent Property Land Use and
Zoning:
North – Residential/Residential-6 (R-6)
South – Residential/Residential-6 (R-6)
East – Residential/Residential-6 (R-6)
West – Residential- R-6
II. BACKGROUND
This request seeks Historic
Preservation Design Approval for
the construction of a new single -
family residential dwelling at 438
W. Hampton Ave., shown in red on
the location map to the right.
The property is a narrow, 0.28 acre
vacant lot located between two
existing single family residential
lots. Photos of the property are
shown on the following page.
Historic Context
The site is currently vacant, and aerial photography indicates that the property has been without a
structure since at least 1989.
Above: View of the subject property from W. Hampton Ave.
The property was not included in the 1984 Historical Resources Survey due to the lack of a
structure on the site.
The applicant intends to utilize this property to
construct a new single-family dwelling.
Scope of Work:
The scope of this project is the constructi on of a
new single -family dwelling , with an attached
rear garage. A rough plot plan of the proposed
structure is shown to the right.
The structure will be clad in vinyl siding and
windows, black architectural shingles , with
wooden porch columns and fixtures. Renderings
of t he structure are sho wn on the following
page, however, note that the color shown on the
renderings doe s not accurately portray the
proposed color chosen by the applicant , which is
detailed later in the report.
Above: Angled rendering of the structure; Below: Front elevation of the structure
Above: Rear building elevation
Above: Western building elevation; Below: Eastern building elevation
Above: Proposed floorplan of the structure
Design review approval is required prior to undertaking the proposed changes.
The Design Review Guidelines Manual states:
6.2 Residential Properties
High quality infill construction on vacant or underutilized lots has the potential to
strengthen the vitality of t he Hampton park design review district, and over time,
contribute to i ts evolving architectural character. Existing buildings in the residential
historic district represent a variety of architectural styles. While these buildings differ in
their detailing and level of ornament, certain patterns area consistent among them in terms
of their siting and appearance. The intent of these guidelines is to encourage new buildings
that reinforce and respond to the principal design elements of historic houses in the district,
while reflecting their own time in the development of the city.
A. Design buildings to reflect their own time
Avoid the direct imitation of the historic style that would blur the distinction between
old and new.
Avoid any reference to historic styles that precede the grow th and development of the
district.
Staff Analysis:
The proposed structure is a simple, straightforward design that draws inspiration
from elements of shotgun-style houses. While it lacks the shotgun -style floor plan, the
entire structure, including the attached garage , is perpendicu lar to the s treet, and
follows the slim profile characteristic of the style.
By altering the floorplan, and incorporating more modern materials, the st ructure
avoids conveying a false historic character, and w ill be easily id entifiable as a non-
historic structure.
B. Incorporate the principal elements of the traditional residential structures
into the design of new house
Staff Analysis
The principal design element that the newly proposed structure bo rrows from
traditional residential design is the inclusi on of a covere d front porch. This serves to
concentrate visual in terest to the front of the structure and ensures that the d esign
keeps a human scale.
The proposed design also modi fies a traditional design element of residential
structures in the area through the i nclusion of a side loading attached garage.
Garages in the Hampton Park area are ty pically detached, or not present on the site
at all. In this design, the garage is built flush with the s tructure, and is designed to
appear to b e a continuation of the resi dential dwelling. By not including a secondary
structure, this design seeks to preserve the dwelling as the primary visual focal point.
C. Relate the setback, orientation, and spacing of new construction to that of
existing buildings.
Align new constructio n with the setback established by adjacent houses, while
conforming to zoning requirements.
Establish an average setback if the standards of adjacent houses are inconsistent
Maintain average side yard setbacks based on adjacent houses and adhering to
applicable zoning regulations
Orient the primary façade to the major street onto which the lot faces.
Staff Analysis
Due to the varied time of development for the homes on W. Hampton Ave ., setbacks
for other homes in the surrounding area are inconsistent , with several of the
neighboring dwellings encroaching into setback areas, or over property lines.
Front setbacks in this area vary from as little as approximately eight (8) ft. at 437 W.
Hampton Ave., to nearly 60 ft. at 443 W. Hampton Ave. T he proposed 25 ft. setback is
smaller t han the 40 -45 ft. setbacks for the adjacent structures at 436 and 442 W.
Hampton, Ave. The proposed 25 Ft. setback is consistent with zoning requirements.
The proposed structure will be l ocated eight (8) ft. from the eastern property line and
will be located 25 ft. from the western property line to accommodate the driveway for
the use. This site configuration is consistent with development along Hampton Ave.
D. Develop respectful relationships in terms of size, scale and ma ssing t o
adjacent historic buildings
Use an appropriate form and massing for new construction that relates to the
majority of the surrounding buildings
Reflect the widths of adjacent buildings in new construction., Generally, new
construction should not differ in width by more than 10 percent from typical
buildings on the street
Reflect the heights of adjacent houses in new construction. Generally, new
construction should not differ in height by more than 10 percent from typical
buildings on the street.
Create visual interest at the ground level to emphasize the human scale of the
building by incorporating functional elements like traditional front porches
Staff Analysis
As proposed, the s ingle-family dwelling will be 23 ft. wide a t the front porch area ,
expanding to a uniform 27 ft. wide throughout the rest of the structure. Neighbo ring
structures a re similar in width at their front setback , b ut typically expand to larger
widths of 40-50 ft. The result of th e applicant ’s proposed layout is a substantially
thinner building tha n is typical in the a rea, and that lacks the visual intere st
generated by the modulation of the façade into larger sections.
However, due to the smaller lot size (60 f t. i n width ), and de cision to u tilize a side
loading attached garage, site development is constrained to the thinner, less
conventional shape and design in order to accommodate the side driveway.
E. Choose roof forms for new construction that are similar to adja cent historic
examples
Use a minimum roof pitch of 6:12 and a maxi mum roof pitch of 12:12 to facilitate
drainage.
Staff Analysis
The applicant intends to uti lize a roof pitch of 6:12, which is consistent with Design
Review Guidelines, and is similar in pitch to the home at 436 W. Hampton Ave.
F. Respect the height and c ontrast of materials of foundations on adjacent
historic buildings
Align foundation height of new construction with adjacent houses
Ensure foundation heights is within 10 percent of the average foundation height of
adjacent houses
Build a new foundation at least one foot above grade on the primary elevation
Differentiate the foundation level fr om the main wall plane through a change in
material or texture
Staff Analysis
This request details a brick foundation, which is consistent with adjacent development,
and will be built to a similar height as adjacent development.
The brick foundation will then transition into vinyl siding, which will d ifferentiate the
foundation level from the rest of the home.
H. Incorporate a porch on the primary elevation of new residential construction
Ensure that the design, placement, and height of a porch is in accordance with those
of adjacent buildings on the block
Design a porch to have a depth of at least 6 feet, although 8 to 10 ft. is recommended
to create a usable space.
Use simple, round or square columns of a uniform shape and style, with a base and
a cap. Aim for a minimum diameter of 6 inches and a maximum diameter of 10
inches for cornices and frieze boards, soffits, eaves, trim and moldings.
Use simple square balusters with appropriate proportions and spacing.
Design the porch roof with a pitch equal to or less than that of the main roof
Staff Analysis
The porch as submitted is 23 ft.
wide, an d eight (8) ft . in depth ,
with 8-inch stained wooden
columns, wooden balusters, and
matching wood railing. The roof is
consistent in mater ial with the
roofing on the rest of the structure
but is at a significantly lower pitch
than the dwelling’s primary roof.
The porch is lacki ng some finer
design detail f ound elsewhere in
the district, such as bases a nd caps fo r the support columns, but overall is consistent
with design review guidelines.
I. Arrange Windows and Doors to r eflect the traditional size and proportion of
those on adjacent houses
Keep new doors and window openings within 10 percent of the height and width of
those on adjacent historic houses
Proportion windows to be approximately twice as tall as they are wide
Staff Analysis
The proposed doo r for the structure is consistent in siz e and location as adjacent
structures and meets design review guidelines.
The width of the window s for the proposed structure are a larger departure from the
surrounding pattern of development. The applicant is proposing two (2) squa re
windows on the front elevation, with a two over two sash configurat ion, with an
identical window included on the western elevation. The home also will utilize si x
vertically oriented one over one rectangular windows on the side elevations that are
more consistent with the pattern of development for the area.
While guidelines generally advocate for rectangular, vertical ly arranged windows , in
this instance the larger windows on the front elevation serve to create a more visually
interesting space due to the small width of the building.
J. Arrange windows and doors to reflect t he spacing, rhythm and alignment of
others in the district
Staff Analysis
While the arrangement of t he windows and doors on the front elevation is consistent
with the rhy thm and s pacing found elsewhere in the district , the place ment of
windows elsewhere on the structure is less conventional. The window openings for the
structure are configured t o match the unconventional floor plan , and a s a result are
not uni form in locat ion a nd spacing like other homes in the d istrict. This results in
concentrations of windows near the front of the home, and large stretches of buildi ng
without any windo ws at all. The rear elevation in particular does not have any
exterior windows.
Surrounding homes have their window s more even ly dist ributed throughout the
length of the structure.
K. Relate the ratio of solid walls to voids (window s and doors) of new houses to
that of adjacent historic houses.
Avoid blank walls by covering a minimum of 20 percent of wall surface between the
eaves and foundation with window and door openings.
Avoid large expanses of glass or solid wall that convey a contemporary appearance.
Staff Analysis
As mentioned previously, there are large sections of th e side and rear of the structure
that are solid walls lacking adornment or windows to generate visual interest. Design
Review Guidelines in this instance wou ld advocate for a more even distr ibution of
windows in order to maintain a more consistent appearance throughout the structure.
L. Use traditional styles found in the district as the basis for new doors and
windows
Incorporate glazing, sidelights, and a transom into the designs of new entrances
Use a pane configuration for windows that is compatible with ot her houses in the
district and that is consistent with the style of the house.
Scale shutters to fit the window opening and only use them when they are in keeping
with the style of the house.
Staff Analysis
The applicant intends to utilize a simple wooden shaker style door with glass glazing,
in a white color. While the door design does incorporate glazing, it lacks some of the
more decorative fea tures of doors typically found in the historic district, such as
sidelights and transoms
The windows will b e a vinyl material
consistent with many of the newer replacement
windows in the Hampton Park area. The fro nt
windows will be accented by inoperable wooden
shutters. The shutters as proposed are not
sized appropriately to the windows the y
accompany. Design r eview guidelines would
advocate for installing proportionately
appropriate shutters or removing them from
the design.
M. Reinterpret traditional architectural design elements in a contemporary
manner
Incorporate simplified architectural features that reflect but do not duplicate similar
features found on existing historic buildings in the district
Concentrate architectural detail in areas that traditionally feature detail , such as
floor transitions, window surrounds, and cornices or pediments
Use detail that is three dimensional to add visual interest and texture to the façade
Staff Analysis
The bulk of the architectural detail of the house is concentrated in the front elevation,
particularly in the porch design . However, due to the orientation of the structure, the
western elevation of the structure will also be highly visible. The historic guidelines in
this instance would advocate for additional architectural detail in elements along the
side of the structure such as using cornices, friezes, or utilizing other forms of
architectural detailing to create visual interest.
N. Choose high quality and durable materials that are visually compatible with
and complimentary to the architectural character of the district and
surrounding buildings
Use brick or concrete for the foundation material. If concrete block is used, it should
be painted or covered with stucoo
Use wood or brick for exterior wall cladding of new construction or additions
Employ a uniform primary wall material on all sides of the building
Use horizontally oriented weatherb oard, clapboard , or shiplap siding for frame
buildings
Use traditional materials for trim, windows, doors, porches, and other decorative
features. Contemporary materials that are compatible with historic materials may be
acceptable if the material conveys the visual qualities of traditional materials.
Consider traditional standing seam metal or asphalt shingles.
Staff Analysis
Like many homes in the historic district, the proposed structure u tilizes a traditional
brick foundation material, but eschews traditional wooden or brick cladding in favor of
vinyl siding. The guid elines strongly advocate for new construction to utilize
traditional materials for the siding of a building , however within the Hampton Park
district, a general certificate of appropriat eness has been issue d for vinyl siding ,
allowing the Historic Preservation Board to approve its use.
O. Select from a coordinated color palette informed by historic precedent and
compatible with adjacent buildings and the district as a whole.
Staff Analysis
Much of the struc ture’s color will
be the result of the color of the
prefabricated vinyl siding , which
in this i nstance is Tuscan Olive.
A photo of the proposed material
and color is shown in the imag e to
the right and on the image on the
proceeding page. Other than the
vinyl siding, the only other colors
present on the structure wi ll be
the black architectural shingles ,
and the white windows and doors.
The proposed color palate is neutral in nature and is consistent with the c haracter of
the Hampton Park area.
III. STAFF RECOMMENDATION
This request is a basic design t hat is relatively sim ple in terms of ornamentation and
architectural detail in comparison to the majority of the homes in the Hampton Park area.
Several of the design choices for the structure, such as the window placement, are
unconventional, however many of these design features are dictated by constraints
resulting from the small size of the site.
Overall, the structure i s generally consistent with the design re view guidelines. Sta ff
recommends approval of the request , with consideration that the structure be moved
further back on the site to match the se tback lines of the adjacent properties to the east
and west consistent with the City of Sumter Historic District Guidelines.
IV. DRAFT MOTION
1.) I move that the Su mter Historic Preservation Design Review Committee approve
HP-20-03 in accordance with the materials, photographs, and construction details
submitted and referenced in the Staff Report based on compl iance with Design
Review Guidelines.
2.) I move that the Sum ter Historic P reservation Design Review Committee deny HP -
20-03
3.) I move that the Sumter Historic Preservation Design Review Committee enter an
alternative motion.
V. HISTORIC PRESERVATION – February 27, 2020
The Sumter Historic Preservation Design Review Committee at its meeting on Thursday,
February 27, 2020, deferred the request for the construction of a new si ngle family
dwelling with attached rear garage.
The Board has requested that the bui lding plans be modified to add additional
architectural detailing and address window placement on the side facades to make
structure more compatible with the District as a whole.
VI. HISTORIC PRESERVATION – MARCH 26, 2020
Source: City of Sumter website. First collected Nov 14, 2026.