hp-20-17_112_n-main_st_city.pdf
City of Sumter · Sumter County · Other
Open the original document More from City of Sumter
This document is no longer listed on City of Sumter's website. We kept the copy we read.
Text
Extracted automatically from the original. Tables and formatting may not survive; the original document is authoritative.
Historic Preservation Design
Review
September 24, 2020
HP-20-17 112 N. Main St. (City)
I. THE REQUEST
Applicant: R. Scott Bell
Status of the
Applicant:
Project Architect for property owner
Request: Design review approval for construction of a +/- 300 sq. ft.
metal horizontal awning attached to the rear of the
building.
Location: 112 N. Main St.
Present Use/Zoning: Vacant / CBD
Tax Map Reference: 228-12-04-030
Adjacent Property
Land Use and Zoning:
North – Drakeford Architects / CBD
South – Thompson Industries / CBD
East – N. Main St. / CBD
West – Prisma Tuomey Hospital / CBD
II. BACKGROUND
The applicant is seeking Historic
Preservation design approval to
make alter ations to the rear (alley -
facing) elevation of the building
located at 112 N. Main St, shown in
the photo to the right
The structure is a two -story brick
commercial building that is located
on the west side of N. Main St.
between Drakeford Architects and
Thompson Industries.
2
Architectural & Historical Significance:
Based on the 1985 Historic Resources Survey, 112 N. Main St. is a 2-story, 20th
century revival style store building with a rectangular plan . The site once housed
the R.T. (Robert) Brown’s Tire Services . The building was constructed circa 1928,
and is shown on the 1931 Sanborn Maps. As shown in photograph below, at the
time of the Survey, the façade at 112 N. Main St. was obscured by an opaque veneer
and altered storefront. This alteration did not allow for full analysis of the integrity
of the façade or condition of any windows on the structure at that time. The veneer,
along with several non-historic façade alterations were removed around 2014.
The historic structure was constructed concurrently with the structure at 1 00 N
Main St., and both originally were identical in size and design. Previous alterations
to the front and rear façades of the structure to match the appearance of the 100 N
Main St. building were granted design review approval in 2013 and 2019.
3
This structure is located inside the des ignated National Register District boundary.
It is deemed to be a contributing structure within the District , and is historically
significant as a result of both its age and architectural features.
Site Photos:
Rear (alley) elevation of 112 N. Main St.
Rear (alley) elevation with adjacent building (106
N. Main St.) in view
Rear (alley) elevation of adjacent building (106
N. Main St.)
Side elevation of 112 N. Main St.
4
Current architectural elevation and site plan view showing the scope of the
proposed work are depicted below:
Scope of Work:
It is the Applicant’s intent to complete rear elevation renovations to the building,
which faces an existing alley.
Based upon the submitted architectural elevation/rend ering, the following is
proposed:
1) Installation of a new horizontal 42 x 7 ft. (300 sq. ft.) horizontal awning with
overhead support arms;
2) Installation of new brick pavers;
3) Extension of existing 18 -inch width flush co ncrete ribbon curb from the
adjacent parcel.
Architectural elevation and overhead view showing the scope of the proposed work
are depicted below:
Below: Proposed Side and Rear Elevations
5
Below: Proposed Area Plan.
Below: Proposed Canopy Design Detail
6
Design review is required prior to undertaking the proposed work.
The Design Review Guidelines Manual states:
4.3 Exterior Walls: Masonry
Exterior masonry walls exist in both the commercial and residential historic district.
Masonry materials include brick, stone, concrete , stucco, and terracotta. Brick is the
most common masonry material used in Sumter and is used primarily for exterior
walls, foundations, and chimn eys. Some exterior masonry walls are solid brick,
while others are brick veneer, consisting of a single brick course o ver a wood f rame
structural system. In both cases, the brick exterior wall surface, and their associated
bond patterns and textures, defin e the appearance and character of the building.
Masonry elements can also be used to create decorative details and tex tures, such as
corbelled brick patterns and inlays or belt courses.
The color and texture of masonry is an important defining feature, as is the mortar
that bonds the masonry units. Mortar for mo st historic buildings is composed of a
mixture of lime and s and, which allows for expansion and contraction of the mortar
joint in hot and cold weather. In most cases, the use of modern Portland cem ent is
not appropriate for historic buildings, as it is stronger t han traditional historic
mortars and does not allow for joint ex pansion or c ontraction. It is c ommon for
houses and commercial buildings in the historic distric ts to feature a flush or
concave mortar joints.
A. Preserve Original Masonry and its Visual Qualities.
➢ Retain masonry features that are important in defining the overall character
of the building.
➢ Do not remove or obscure masonry elements.
➢ Do not paint unpa inted masonry. Exceptions to this include masonry walls
that have a patchwork appearance from extensive replacement or rebuilding.
Staff Analysis:
The proposed project meets the above s tandards. The brickwork on the rear
elevation of the site is already painted, and the configuration and mounting
planned for the proposed awning will have a minim al visual and physical
impact on the existing masonry.
4.12 Signs and Awnings
B. Consider Traditional Awnings for Signage or Shade
➢ Size awnings to adequately fit commercial storefronts and window, door, or
porch openings of residential buildings.
➢ Locate awnings on the transom bar or below the stor efront cornice, above the
transom, for commercial buildings.
7
➢ Proportion the awning to allow for ample sidewalk clearance and projection
over the sidewalk in downtown.
➢ Choose an appropriate awning shape. Standard sloped awnings are
appropriate in most cases, but circula r or accordion designs can also be
acceptable.
➢ Choose appropriate a wning fabrics, such as canvas, vi nyl coated canvas, and
acrylic as awning materials. Metal and vinyl awnings are not appropriate.
➢ Ensure th e materials and colors are compatible with the de sign and color
scheme of the building.
➢ Consider retractable canvas awning.
Staff Analysis:
While the proposed rear facade awning does not match traditional awning types
as recommended by the Design Review G uidelines, several unique
circumstances apply in this case. First, because the awning is proposed for the
rear of the property facing a n alley and parking area, the inten t of th e
guidelines in preserving a traditional street facing aesthetic does not apply.
Second, the proposed awning is intended to ex tend the existing rhythm of the
adjacent bui lding at 1 06 N. Main St. The buildings are under common
ownership, and the intent is to extend design elements already present at 106
N. Main St.
6.1 Commercial Properties
Architectural Detail and Ornamentation
H. Reinterpret Traditional Decorative Elements in a Contemporary Manner
➢ Incorporate simplified architectural features that reflect, but do not duplicate,
similar features found on existing historic buildings in the district.
➢ Concentrate architectural detail in areas that traditionally featured detail,
such as floor transitions, window surrounds, and cornices or pediments
➢ Use detail that is three di mensional to add visual interest and texture to the
façade.
Staff Analysis:
The proposed project meets the ab ove s tandards. The configuration and
mounting planned for the proposed awning will add contemporary visual detail
to the rear facade.
Additions
K. Distinguish a New Addition from the Historic Building with a Simple and
Unobtrusive Design.
➢ Design an additio n to be subordinate to the existing building in size, design,
and detailing.
8
➢ Locate a new addition on the rear elevation where it will not be highly visible
form the public right-of-way
➢ Include simplified architectural features derived from similar features on the
historic building
➢ Ensure that colors and materials are harmonious with the materials of the
historic building.
L. Avoid Obscuring or Destroying Important Features or Materials of the Existing
Building When Constructing an Addition.
Staff Analysis:
While the proposed rear facade awning does not represent a typical building
addition, application of this section of the design guidelines is appropriate given
the project’s context. The design and materials of the proposed project are
consistent with the above standards.
III. STAFF RECOMMENDATION
Staff recommends approval of this request. The proposed scope of work will retain
the character of the rear of the structure while bringing it in line with the
appearance of the design elements of the sister structure at 106 N Main St.
IV. DRAFT MOTIONS
1. I move that the Sumter Historic Preservation Des ign Review Committee
approve HP-20-17, in accordance with the materials, photographs, and
construction details submitted and referenced in the Staff Report based on
compliance with Design Review Guidelines.
2. I move that the Sumter Historic Preservation Des ign Review Committee
deny HP-20-17.
3. I move that the Sumter Historic Preservation Design Review Committee
enter an alternative motion.
V. HISTORIC PRESERVATION DESIGN REVIEW – SEPTEMBER 24, 2019
Source: City of Sumter website. First collected Nov 14, 2026.