RecordWell Data

HP-25-02, REV 1, 138/140 N. Main St. - Staff Report

City of Sumter · Sumter County · Other

Open the original document More from City of Sumter

This document is no longer listed on City of Sumter's website. We kept the copy we read.

Text

Extracted automatically from the original. Tables and formatting may not survive; the original document is authoritative.

City of Sumter Historic Preservation Design Review May 22, 2025 HP-25-02 (rev 1), 138, 140 N. Main St. I. THE REQUEST Applicant: R. Scott Bell Status of the Applicant: Project Designer Request: Revision to previously issued Design Review Approval to permit demolition and reconstruction of the façade at 138 N. Main St. District Downtown Design District Location: 138, 140 N. Main St. Present Use/Zoning: Commercial Storefront / CBD Tax Map Reference: 228-12-04-081 Adjacent Property Land Use and Zoning: North – Parking Lot / CBD South – Commercial / CBD East – Government / CBD West – Hospital / CBD II. BACKGROUND 138 and 140 N. Main St ., shown in the photograph to the right, is a +/- 4,400 sq. ft. rectangular single-story brick building originally constructed around 1927. According to oral history collected in 1985, the south side of the building has previously served as host to a variety of retail, and professional office uses, while the north side served as a music store since its construction. SEACO Music most recently occupied the space. The building is located on N. 2 Main St. approximately 75 ft. south of the intersection of N. Main St. and W. Canal St. The applicant is requesting a revised approval to the previously issued Certificate of Appropriateness (CoA) to demolish and reconstruct the storefront façade at 138 N. Main St. ARCHITECTURAL/HISTORIC CONTEXT: The property is identified as site # 138 in the 1985 Historic Resources Survey that catalogued the structures in the downtown area. The building was constructed around 1927, with major changes in 1940. The building is a 1- story rectangular plan, with 2 vertical divisions each with a glass storefront and entrance door. The exterior material is brick. There is a transom window on the north elevation of the building that extends approximately 20 ft., and at one time, a mural of music notes was painted on the side of the building. Figure 1 - SEACO Music Building (138 N Main St.), May 1985 The building is within the boundary of the National Register Historic District and of the City of Sumter’s Downtown Design Review District and is subject to the Design Review Guidelines. Based on the age of the building , its location, and architectural design and features, the building is a contributing structure to the City-designated Downtown Design Review District. Design Review approval was granted in February 2025 via HP -25-02 to complete multiple exterior renovations to the building. 3 SITE PHOTOS: Above: Original Building Front (east) façade condition as viewed from N. Main St. (February 2025) Above: Current Building Front (east) façade condition as viewed from N. Main St. (May 2025) SCOPE OF WORK: The proposed revision to the previously approved scope of work includes the following: 138 N. Main St. 1. Install new wood storefront windows and transoms similar to the original design 2. Install new stained wood door 3. Install new black canvas awning at entry door. 4 The renderings, elevations and plans displayed on the following pages show the proposed changes and new construction. Figure 2 - Site Plan Diagram East Elevation (Facing N. Main St.) 5 Proposed exterior paint colors are as follows: Window Trim/Cornices – Tricorn Black (SW 6268) Front façade Woodwork and side/rear brick walls – Gauntlet Grey (SW 7019) DESIGN REVIEW: Design review approval is required prior to the proposed work. The Design Review Guidelines Manual states: 4.5 Architectural Detail and Ornamentation A. Preserve and maintain architectural ornamentation.  Retain architectural ornamentation, including but not limited to cornices, eave brackets, spindles, vergeboard, frieze boards, knee braces, and exposed rafter tails.  Do not remove or obscure architectural ornamentation. B. Replace ornamentation with designs and materials to match the original.  Replace architectural ornamentation only when damaged or deteriorated beyond reasonable repair.  Match the profile, dimensions and materials of the original feature as closely as possible. C. Restore missing ornamentation based on photographic or physical evidence.  Do not apply ornamentation that has no historical basis, as it would create an appearance not in accordance with the building’s original design or style.  Consider a simple cornice of wood or metal on commercial buildings that have lost their cornice. Materials such as fiberglass reinforced concrete may also be appropriate. Staff Analysis: Architectural ornamentation helps to convey historic significance and style. Commercial buildings often feature elaborate cornices at their rooflines of metal, wood, or corbelled brick. The applicant is proposing to retain existing architectural detail, and to install new detail, including cornices over new windows, as well as decorative light fixtures, which are consistent with the Design Guidelines. Gauntlet Gray SW-7019 Tricorn Black SW-6268 6 4.10 Storefronts A. Preserve and Maintain Original Storefronts and their Character-Defining Features and Materials.  Retain the historic storefront configuration, including the original location and size of the entrance doors, display windows, and transoms.  Retain storefront features that are not original, but have gained architectural and historical value.  Retain and repair historic structural components, such as decorative cast iron elements and stone or brick piers.  Retain and repair historic entrance doors and any distinctive hardware.  Retain and repair historic transoms, especially those with prism or leaded glass.  Retain and repair original wood or brick bulkheads. Also, retain elements such as Carrara glass or glazed tile that have gained historic significance in their own right.  Retain and repair the historic cornice or sign band, which delineates the storefront from the upper facade.  Protect historic features and materials by maintaining their historic protective finishes, such as paint or stucco. B. Replace storefront features that are missing or deteriorated beyond repair with compatible elements that match the original in design, dimension, texture, and material.  Replace display windows with new windows that fill the original opening and have wood, copper, or aluminum mullions. Dark anodized aluminum is preferred for new display windows rather than untreated aluminum frames. Untreated aluminum should be primed and painted if used.  Replace storefront glass with clear rather than tinted or reflective glass. Use an awning, canopy, or transparent low-E glass to reduce sunlight and heat gain.  Use wood or brick bulkheads for historic commercial buildings. Match brick bulkheads to the original brick of the building or paint them to complement other storefront elements.  Use wood doors with a single light of glass, as these are appropriate for most historic buildings in downtown Sumter. Metal doors with a dark bronze finish or an anodized aluminum finish may also be appropriate.  Use historic photographs and physical evidence to reconstruct a missing or insensitively altered feature, if documentation is available.  If photographs or physical evidence cannot be found, base the design on similar elements found on nearby historic properties, keeping the design of the replacement feature simple. C. Reconstruct a missing storefront to match the character, scale, and materials of the historic storefront.  Remove inappropriate materials covering the facade.  Conduct exploratory demolition to determine if any historic fabric remains and its condition.  Restore as many of the remaining historic elements as possible.  Use historic photographs and physical evidence to reconstruct a missing or insensitively altered storefront or feature, if documentation is available. D. Consider a simplified or contemporary interpretation of a traditional storefront where the historic storefront is missing or no evidence of it exists.  Base the new design on traditional storefront elements that reflect the scale, proportions, materials, and colors of other commercial buildings in the district.  Use compatible materials that are in keeping with the style of the building.  Avoid creating a false historical appearance by introducing architectural elements where they never previously existed. 7 Staff Analysis: The applicant is proposing to replace the storefront at 138 N. Main St . with a similar design as a result of an error during the demolition phase of the previously approved project. The applicant is proposing to reconstruct the storefront to match as closely as possible the original storefront, albeit with the transoms replaced with glass in lieu of the original wood. The purpose of this material substitution is intended to match the adjacent storefront (140 N. Main St.), replacement of which was approved via HP -25-02 due to severe deterioration. Staff finds the proposed alterations to be consistent with the design guidelines. The portions of the storefront to be replaced were in deteriorated condition, and the proposed configuration is consistent with the general pattern of storefronts in the downtown area as shown in the graphic below. Anatomy of a Façade 4.11 Paint A. Maintain and repaint historically painted surfaces.  Remove paint from masonry only when the paint is not historic, will not reveal aesthetic issues, and will not damage the masonry.  Do not paint unpainted masonry walls unless insensitive past repairs have negatively affected the visual qualities of the masonry.  Do not strip paint or other coatings to reveal bare wood or apply a stain if the material did not historically have a natural finish. B. Select a Compatible Color Scheme.  Choose colors that are appropriate to the architectural style and complement the building and its surroundings. Overly bright and obtrusive colors are not appropriate.  Consider an original color scheme based on paint analysis or research. 8 C. Use Paint Color to Accentuate Exterior Details.  Paint window and door sash and frames a contrasting color from the walls to provide contrast and depth.  Limit the paint scheme to three or four colors, one roof color, one wall color, one trim color, and one accent color. Staff Analysis: The surfaces proposed for painting consist of previously painted surfaces, including brick masonry and window and door trim. The color scheme proposed consists of two colors (Tricorn Black, and Gauntlet Gray). The building colors proposed are consistent with the City of Sumter Historic Preservation Color Palette, and the color scheme is compatible with the design guidelines. 4.12 Signs and Awnings K. Preserve and Maintain Historic Awnings and Canopies. L. Consider Traditional Awnings for Signage or Shade.  Size awnings to adequately fit commercial storefronts and window, door or porch openings of residential buildings.  Locate awnings on the transom bar or below the storefront cornice, above the transom, for commercial buildings.  Proportion the awning to allow for ample sidewalk clearance and projection over the sidewalk in downtown.  Choose an appropriate awning shape. Standard sloped awnings are appropriate in most cases, but circular or accordion designs can also be acceptable.  Choose appropriate awning fabrics, such as canvas, vinyl- coated canvas, and acrylic as awning materials. Metal and vinyl awnings are not appropriate.  Ensure the materials and colors are compatible with the design and color scheme of the building.  Consider using the awning valance as a sign panel for commercial buildings.  Consider retractable canvas awnings. Staff Analysis: The applicant is proposing to install a black canvas awning over the door at the 138 N. Main St. façade . The size of the awnings are appropriate to the building, and the placement location will provide visual interest and functional use to the façade. The proposed awning is consistent with the Design Guidelines. While the applicant has not submitted detailed signage plans, Design Guideline- compatible signage would be appropriate in these locations and could be approved by staff under delegated authority provided that the signage meets the specified criteria regarding size, colors, and style. III. STAFF RECOMMENDATION: Staff recommends approval of this request. The proposed changes are consistent with the City of Sumter Historic Preservation Design Review Guidelines and are compatible with the existing building design. 9 IV. DRAFT MOTION 1) I move that the City of Sumter Design Review Board approve HP-25-02 (rev 1) in accordance with the materials, photographs, and construction details submitted and referenced in the Staff Report based on compliance with Design Review Guidelines. 2) I move that the City of Sumter Design Review Board deny HP-25-02 (rev 1) 3) I move that the City of Sumter Design Review Board enter an alternative motion. V. DESIGN REVIEW BOARD – MAY 22, 2025

Source: City of Sumter website. First collected Nov 14, 2026.