RecordWell Data

Historic District Review Board Meeting (Agenda Packet)

City of Beaufort · Beaufort County · meeting of Mar 12, 2025 · Agenda packets

Open the original document More from City of Beaufort

Text

Extracted automatically from the original. Tables and formatting may not survive; the original document is authoritative.

MEETING AGENDA The City of Beaufort HISTORIC DISTRICT REVIEW BOARD Wednesday, March 12, 2025, 2:00 P.M. City Hall, Council Chambers, 2nd Floor – 1911 Boundary Street, Beaufort, SC Please click the link below to access the webinar: https://us02web.zoom.us/j/87859260474?pwd=R1tEhzjALUvvhrA6nAZcDZ6LOof2i5.1 Password: 089323 Meeting ID: 878 5926 0474 Call in Phone #: 1+929 205 6099 STATEMENT OF MEDIA NOTIFICATION: “In accordance with South Carolina Code of Laws, 1976, Section 30-4-80(d), as amended, all local media were duly notified of the time, date, place, and agenda of this meeting.” Note: A project will not be reviewed if the applicant or representative is not present at the meeting. I. Call to Order: II. Review of Minutes: A. February 12, 2025 Meeting Minutes III. Applications A. 1406 Greene Street, PIN R120 004 000 0241 0000, exterior renovations/alterations Applicant: Lekshmi & Landon Poe, Homeowners The applicant is requesting approval for several exterior renovations/alterations, including roofing, shutters, stucco siding, front door, etc. B. 510 Craven Street, PIN R120 004 000 0890 0000, addition Applicant: Michael Frederick, Frederick + Frederick Architects The applicant is requesting approval for a family room addition and partial enclosure of the rear porch. IV. Discussion V. Adjournment 1 Historic District Review Board Meeting Minutes – February 12, 2025 CALL TO ORDER 0:07 A meeting of the Historic District Review Board was held in-person on Wednesday, February 12, 2025 at 2:00 pm. ATTENDEES Members in attendance: Mike Sutton (Chair), Grady Woods, (Vice-Chair), Kim Petrella, Rita Wilson, and Eric Berman. Staff in attendance: Curt Freese, Community Development Director, Jeremy Tate, Meadors Architecture, and Julie A. Bachety, Community Development Administrative Assistant II . REVIEW OF MINUTES OF DECEMBER 11, 2024 0:23 Motion: Mr. Woods made a motion to approve the December 11, 2024 minutes as submitted. Mr. Berman seconded the motion. The motion passed unanimously. All Historic District Review Board Meeting minutes are recorded and can be found on the City’s website at http://www.cityofbeaufort.org/AgendaCenter. ELECTION OF OFFICERS 1:21 Motion: Mr. Woods nominated Kim Petrella for the position of Secretary. All Board members agreed. The motion passed unanimously. Motion: Mr. Woods nominated Eric Berman for the position of the Vice-Chairman. All Board members agreed. The motion passed unanimously. Motion: Mr. Woods nominated Mike Sutton to remain the Chairman. All Board members agreed. The motion passed unanimously. 2 NOMINATION FOR WATERFRONT PARK COMMITTEE 12:33 Motion: Mr. Berman made a motion to nominate Mike Sutton to sit on the Waterfront Park Committee. Ms. Wilson seconded the motion. The motion passed unanimously. DISCUSSION 17:06 Mr. Sutton spoke about the new material study the HRB allowed to be done on the Cuthbert House to use a synthetic porch decking. The project has now been completed, and Mr. Sutton went by last week and took photographs and an inspection. He found it to be everything he hoped it to be. Now it’s a test of time. He encouraged the other board members to go take a look at it. The next step for the board is to watch the material over the next couple of years to see how it weathers on a hot day and a wintery cold day. Mr. Freese asked the board members if they would be interested in a spring or summer training. Mr. Sutton suggested doing a walking tour of projects in Beaufort. Everyone agreed that April or May would be best. Mr. Sutton said a list is put together of what would be good to look at. Mr. Freese will put together an outline of ideas we want to visit (i.e.: new construction that’s been recently approved and how it fits the conducts of the neighborhood; how new materials are holding up at Cuthbert House; look at 1401 Duke Street, and properties that have been recently stabilized. Mr. Freese spoke reminded the board members of the Strategic Plan that has been rescheduled for February 24 – 26. The Chairman has a seat for it. Mr. Sutton said he is not available. Mr. Berman said he can attend Monday and Tuesday. ADJOURNMENT 34:27 Mr. Woods made a motion seconded by Ms. Petrella to adjourn. The meeting ended at 2:34 pm. 1406 GREENE STREET Discussion/Approval of major renovations proposed on the exterior of existing residential house (non-contributing, ca. 1965) CITY OF BEAUFORT HTRC – Pre-Design Application Meeting 1911 BOUNDARY STREET BEAUFORT, SOUTH CAROLINA 29902 (843) 525-7011 FAX: (843) 986-5606 Meeting Summary Date: 2/5/2025 Project Address: 1406 Greene Street Project Narrative: Discussion on proposal for several exterior house improvements, including roof, shutters, stucco siding, front door, etc. Applicant: Lekshmi Poe (Homeowner) Synopsis of staff comments: • Planning and Zoning: o Noncontributing Structure • Building Codes: o Windows will need to comply with the Energy Code • Architecture: o From previous HTRC meeting:  5V crimp roof can be approved but staff strongly recommends either a standing seam mechanical lock metal roof or replacement in-kind of asphalt shingle. Staff supports the example roof at 2302 Simms Street (corner of Bay Street and Ribaut Road).  Staff has no objections to keeping the existing metal columns as noted by HBF. Staff does support the replacement of these columns with cedar columns with a simple cap and base. Please note the dimensions and details of the columns in any future submitted drawings.  Staff recommends keeping the existing windows where possible, and supports the addition of a storm window for added energy efficiency. If window replacements are preferred, please submit photos of the existing windows to be replaced and describe their conditions/why they warrant replacement. Vinyl windows are not supported, and staff would prefer either a wood or fiberglass product. See the Beaufort Preservation Manual for additional window information.  Staff has no objections to the request to enclose the kitchen door and convert the rear bedroom window with a door. Please note the changes in plan and elevation drawings.  Staff prefers the applicant keep the CMU block and clean and paint the CMU. If the applicant would like to use board and batten, please provide any details such as window sills, casings, cornerboards, skirtboards, siding to soffit connections, etc. Applicant should also note the dimensions of the boards and battens, profiles, specific product cutsheet, etc. o Applicant is proposing a snap-lock roof in “Aged Copper” (Patina Green), staff supports the provided roof profile in “smooth panel structure” – provide manufacturer’s details for eave/ridge/hip connections. Staff would like to see a sample of the proposed roof color as the digital image is hard to judge. o Applicant is proposing Kolbe Forgent windows – drawings appear to show a2 horizontal lite over 2 horizontal lite pattern. Staff is in support of this, but applicant to note that windows must have exterior SDL grilles with interior spacer bars – spacer bars (GBG) only is not allowed in the historic district. o Staff does not support the proposed idea to install 3x3 galvanized steel beams as columns on the front porch – this is not appropriate for the Beaufort historic district and especially not on a residential structure, regardless of age. Staff recommends either keeping the existing columns or reverting back to the 6x6 cedar columns, which staff had previously supported. o Applicant is proposing white smooth stucco, Staff is in support o Staff supports the Bermuda shutter selection. Staff recommends the shutters be painted. Transparent finish sapele, in Beaufort’s environment, will require constant maintenance to keep the shutters in good condition. A painted shutter will last longer and be easier to maintain. o The proposed front door is not in keeping with the style of the house nor with Beaufort’s Historic District. Staff recommends the applicant select another design that is consistent with the district and style of the house. Also, the hammered steel entry door handle set seems at odds with the mid-century modern house. o As a simple recommendation, staff recommends selecting a different fan and lantern. Applicant seems to be going for a more modern, simplistic design, and would recommend a simple rectangular lantern and fan without the cage. o Staff does not support gas lanterns on buildings and recommends the light be the electric version. Gas lanterns historically were not used on residences but rather were used for street lighting. o Staff does not support staining the exposed soffit eaves and rafters as this is not consistent with other structures in the district. Staff recommends painting these features. • HBF: o Retain the midcentury narrative- windows, cmu, porch columns Applicant’s Next Steps: Apply for March 12 th HRB hearing, have documentation ready by February 28th to meet the March 12th deadline. Be advised that this letter is given as a courtesy to applicants and may not contain all project guidelines. For a complete history of the meeting, please request the audio recording. Please refer to the Beaufort Code for applicable sections. If there are any changes to the project, not discussed in this meeting, you will need to return to a HTRC – Pre-Design meeting. If you have any questions, feel free to call the Community Development Department at (843) 525-7014. Thank you for your patience and cooperation during the review process. Sincerely, City of Beaufort Community Development STAFF REPORT: Historic District Review Board (HRB) 1406 GREENE STREET – Approval DATE: March 12, 2025 Background: The applicant has already been to the Historic District Review Board (HRB) to present a list of renovation items to the exterior of the non-contribution, mid-20th century CMU house on 1406 Greene Street. After the HRB’s meeting on July 10, 2024 the applicant was presented a Decision Letter for approval of her request with a total of ten (10) conditions: 1. Applicant provide a cutsheet showing specific detail on green standing seam metal roof. 2. Applicant to provide a cutsheet for the new front and rear doors. GENERAL INFORMATION Applicant: Lekshmi & Landon Poe (Homeowner) Site Location/Address: 1406 Greene Street; R120 004 000 0241 0000 Applicant's Request: Applicant is proposing several exterior renovations/alterations, including roof, shutters, stucco siding, front door, etc. Current Zoning: T4-HN Contributing/Neighborhood Non-Contributing (built ca. 1965) as per Nat’l Register of Historic Places Flood Zone/Base Flood Flood Zone X, Elevation: ~23’-25’ Existing Trees Large Landmark tree (either a Laurel or Live Oak) right at the property line on adjacent property. ZONING DISTRICT INFORMATION T4-HN Lot Width at Setback: 40 ft min, 60 ft min in The Point Max Lot Coverage: 55% of lot area Min. Frontage Build Out 75% max Front Setback Average Prevailing Setback on Block Side Setback Corner: 5 ft min (corner); Interior: 6 ft min, 10 ft min in The Point Rear Setback 15 ft min Building Height: 3 stories max SURROUNDING ZONING, LAND USE AND REQUIRED BUFFERS Adjacent Zoning Adjacent Land Uses Setbacks for Adjacent Zoning /Buffer required if rezoned North: T4-HN Residential home, non-contributing N/A South: T4-HN Infill development (residential) N/A East: T4-HN Historic home (c. 1910) N/A West: T4-HN Historic home (c. 1870, abandoned) N/A 2 3. The drawings depict two over one windows, which are different from the existing windows with no vertical muntins. If the applicant is planning to replace all windows, a cutsheet from the window manufacturer must be provided. 4. Reconsider the new wood columns appear too wide and ornate for the building. Staff recommends reducing the size of the columns and simplifying the column caps. Staff also recommends adding a simple column base. 5. Remove the use of tabby as a foundation material. 6. Reconsider the new stucco and siding on the left and right (east and west) facades and how it is applied on the existing CMU and terminates 12’ from the front plane. Since the CMU wall is one continuous plane, these new materials would be applied directly to the face of the CMU, leaving the edge as an awkward termination that shows the depth of the siding and cornerboard, skirtboard, and stucco. If the applicant wishes to add the stucco and siding, this should be added around the entirety of the building or not added at all. 7. Reconsider utilizing a new siding material, consider either board and batten siding or lap siding, instead of using both and changing the material on each façade. Please note that lap siding is shown on the elevation drawings, but the note calls out board and batten siding. 8. Applicant to provide typical window head, sill, and jamb details, especially for the windows surrounded by new siding. Staff has concerns that the new casings and sills will be too “flat” on the CMU portions in comparison to the ones in the proposed new siding areas. Staff is concerned with how the applicant will case the windows in the CMU walls and connect to the existing masonry sills. As drawn, these areas appear as picture framed casing which is not allowed per the Beaufort Code. The windows must have a projecting sill. 9. Applicant appears to be adding Bermuda shutters on two of the left (west) façade windows. Provide a cutsheet for the shutters and note that they must be operable. 10. Applicant depicts exposed rafters around the building that do not currently exist. Applicant to show a typical wall section that shows the new exposed rafters. Updated request / further provided details by applicant for HRB approval: The applicant at the last HTRC Meeting on February 5, 2025, has provided City staff with the following updated information in relation to proposed exterior materials (also in response to above conditions): Exterior Materials proposed: Feature Material Color Roof Standing seam snap-lock metal roof (Manufacturer: GulfCoast; Material: 24 gauge steel; standing seam: 1-1/2”; Patina green 3 16” panel coverage; smooth panel structure) Exterior Cladding Smooth Stucco (Manufacturer: Omega Products; 30/30 Float Finish) White (“Omega White”) Front Doors: Wood (solid hardwood) with three vertical textured glass window panes running down the entire length including “Bullock” Entrance Door Set with Round Knob ( 2-3/8” Backset, Dark Bronze); (Door manufacturer: Creative Entryways; Size: 36” x 79” x 1-3/4”) Dark Walnut (Paint manufacturer: Varathane – One-Step Stain & Polyurethene) Soffit eaves/rafters Exposed and stained Dark Walnut (Paint manufacturer: Varathane – One-Step Stain & Polyurethene) Windows: Fiberglass 1 x 2 / 1 x 2 grid (double hung) (Manufacturer: Kolbe Forgent Series); variable sizes White Window sills Stucco overhang White Front porch columns Galvanized steel metal beams, 3” x 3” Patina green 4 Bermuda shutters Sapele wood, stained with operable louvers; variable sizes Dark Walnut Gas lantern (front porch) Charleston Flush Mount Copper Gas or Electric Wall Lantern; Size: 17.5” x 10.5” (Manufacturer: Arranmore) Raw Copper Front porch ceiling fan Blynn – LED lit Indoor/Outdoor fan; Size: 22” x 16.5” (Manufacturer: Arranmore) Charred Iron Tree Removal Proposed: No trees are proposed to be removed. Surrounding Area: This property is located in the Northwest Quadrant. The buildings on the block and surrounding area are made up of historic structures. Most of the buildings are one story in height, with a few two-story buildings throughout. The specific residential is a mid-1960’s CMU-dwelling, which therefore is regarded as a non-contributing resource on the National Register of Historic Places for the Beaufort Historic District. Determination of adequate historic integrity for New Construction, Infill, Additions and Demolition: As per the Beaufort Preservation Manual (Chapter 5) and the Beaufort Development Code (Section 4.7), new infill construction as well as major renovations to existing structures must be conducted in consideration to the architectural fabric of the community. This can be successfully achieved by adhering to the following principles: 1. Location, 2. Design, 3. Setting, 4. Materials, 5. Workmanship, 6. Feeling and 7. Association. As per these guidelines, following staff analysis determines the integrity of this major renovation request. 5 4.7.2 Integrity Guidelines (as per Beaufort Development Code) Rationale Present (yes/no) Staff Analysis of Rationale 1. Location: This is the relationship between the property and its historical context. Yes ✓ The CMU-dwelling from ca. 1965 can be historically tied to many similar houses in the Northwest Quadrant neighborhood. 2. Design: This is the combination of elements that create the feeling of a district or structure. These elements include building patterns, streetscapes, site elements, building size, mass and scale, spatial relationships, and specific architectural elements and details. No X There are many proposed design elements that are neither compatible with the historic theme of the neighborhood nor representative with the period of its original construction (mid-century). 3. Setting: This is the physical environment of a property and should be evaluated on its context as well as on the historical role the property has played and continues to play. Important features include topography, vegetation, man-made features, and relationships between existing structures and their surroundings. Yes & No ✓ The surrounding properties are mainly residential dwellings of smaller size (mostly 1-story bungalows). Therefore, this residential retrofit complies with its surroundings in use and scale. X Man-made feature may be altered too much to be representative of its historic setting. 4. Materials: These are the physical elements that make up a property or district. No X Many of the proposed architectural design features do not comply with the visual texture of the Northwest Quadrant. 5. Workmanship: This is the physical evidence of the crafts of a particular culture or time period. This particularly applies to rehabilitation projects, but for new infill projects, workmanship of surrounding structures should be considered and respected. Retaining the details of the original craft and craftsman (i.e., wood, Yes & No ✓ The proposed renovations are much needed and generally represent a major improvement to the workmanship of this specific property. X However, the proposed exterior design details are not representative of the historic design era of the original 6 masonry, tabby etc.) of the original building ensures the historic fabric is retained and serves as an important component of the integrity and the patina of age of individual structures and the district as a whole. structure (mid-century) nor are they representative to the historic fabric of the surrounding neighborhood. 6. Feeling: This is the property's expression of the aesthetic or historic sense of a particular period of time. This particularly applies to rehabilitation projects, but for new infill projects, the feeling of surrounding structures should be considered and respected. No X The proposed design features neither aesthetically represent the historic period of the building (mid-century) nor does it help to reinstate the historic feeling of the neighborhood. 7. Association: This is the direct link between an important historic event or person and a property. This particularly applies to rehabilitation projects, but for new infill projects, association of particular sites and neighborhoods considered. N/A ✓ Staff has not found any relevant history or persons directly linked to this specific property. Synopsis of staff comments from last Historic District Technical Review Committee (HTRC) Meeting on February 05, 2025: • Planning and zoning: ➢ Non-contributing structure ➢ Zoned T4-HN • Building Codes: ➢ Windows will need to comply with the Energy Code • Architecture: ➢ Roof: o Applicant is proposing a snap-lock roof in “Aged Copper” (Patina Green), staff supports the provided roof profile in “smooth panel structure” – provide manufacturer’s details for eave/ridge/hip connections. Staff would like to see a sample of the proposed roof color as the digital image is hard to judge. ➢ Exterior cladding: o Applicant is proposing white smooth stucco. Staff is in support. ➢ Front door: o The proposed front door is not in keeping with the style of the house nor with Beaufort’s Historic District. Staff recommends the applicant select another design that is consistent with the district and style of the house. Also, the hammered steel entry door handle set seems at odds with the mid- century modern house. ➢ Soffit eaves/rafters: 7 o Staff does not support staining the exposed soffit eaves and rafters as this is not consistent with other structures in the district. Staff recommends painting these features. ➢ Windows: o Applicant is proposing Kolbe Forgent windows – drawings appear to show a2 horizontal lite over 2 horizontal lite pattern. Staff is in support of this, but applicant to note that windows must have exterior SDL grilles with interior spacer bars – spacer bars (GBG) only is not allowed in the historic district. ➢ Front porch columns: o Staff does not support the proposed idea to install 3x3 galvanized steel beams as columns on the front porch – this is not appropriate for the Beaufort historic district and especially not on a residential structure, regardless of age. Staff recommends either keeping the existing columns or reverting back to the 6x6 cedar columns, which staff had previously supported. ➢ Bermuda shutters: o Staff supports the Bermuda shutter selection. Staff recommends the shutters be painted. Transparent finish sapele, in Beaufort’s environment, will require constant maintenance to keep the shutters in good condition. A painted shutter will last longer and be easier to maintain. ➢ Gas lantern: o Staff does not support gas lanterns on buildings and recommends the light be the electric version. Gas lanterns historically were not used on residences but rather were used for street lighting. ➢ Outdoor front porch ceiling fan: o As a simple recommendation, staff recommends selecting a different fan and lantern. Applicant seems to be going for a more modern, simplistic design, and would recommend a simple rectangular lantern and fan without the cage. • HBF Recommendation: o Retain the mid-century narrative, including windows, CMU, porch columns FINDINGS AND RECOMMENDATIONS Staff Recommendation: Staff recommends f inal approval of the proposed renovations , in that it satisfies the intent of the Beaufort Preservation Manual and requirements of the Beaufort Code , with the following conditions: 1) Staff supports the proposed standing seam metal roof in the patina green color with smooth panel finish , but staff would recommend a flat “smooth” panel in between the seams as opposed to the striations in each panel. 2) Staff supports the proposed white smooth stucco finish. 8 3) Staff believes that the proposed front door is not in keeping with the style of the house nor with Beaufort’s Historic District. Staff recommends the applicant select another design that is consistent with the district and style of the house. Also, the hammered steel entry door handle set seems at odds with the mid-century modern house – staff recommends selecting different hardware. 4) Applicant is proposing Kolbe Forgent windows. Staff supports this window selection , but applicant to note that windows must have exterior SDL grilles with interior spacer bars – spacer bars (GBG) only is not allowed in the historic district. Additionally, the window sheet notes that the window will be a 1x2/1x2 lite pattern, but the picture appears to show a 2x2/2x2 pattern. Applicant to submit a clearer photo that depicts the lite person. Sheet A201 also shows a more traditional 2/1 window pa ttern, this sh ould be amended to reflect the proposed lite pattern. 5) Staff does not support the proposed 3x3 galvanized steel beams as columns on the front porch – this is not an appropriate detail for the Beaufort Historic District, and especially not on a residential structure, regardless of age. Staff recommends either keeping the existing columns or reverting back to the 6X6 wood columns, which staff had previously supported. 6) Staff supports the Bermuda shutter selection , but recommends the shutters be painted. Stained sapele , in Beaufort’s environment, will require constant maintenance to keep the shutters in good condition. A painted shutter will last longer and be easier to maintain. 7) Choose a different kind of front porch lamp (rectangular shaped) , but not a gas lantern, as those were not commonly used for house lights in historic Beaufort; 8) Staff recommends selecting a different fan and lantern. The applicant appears to be aiming for a more modern, simplistic design, and would recommend a simple rectangular lantern and fan without a cage. 9) Staff does not support gas lanterns on buildings and recommends the lights be electric. Gas lanterns were historically not used on residences but rather were used for street lighting. 10) Staff does not support staining the exposed soffit eaves and rafters as this is not consistent with other structures in the district. Staff recommends painting these features. 510 CRAVEN STREET Approval of minor addition and changes to back porch and stairs at existing residential house (contributing, ca. 1885) HISTORIC REVIEW APPLICATION MAJOR REVIEW (HISTORIC REVIEW BOARD) Community Development Department 1911 Boundary Street, Beaufort, South Carolina, 29902 Application Fee: p. (843) 525-7011 / f. (843) 986-5606 see attached schedule Email: development@cityofbeaufort.org / Website: www.cityofbeaufort.org OFFICE USE ONLY: Date Filed: __________________ Application #: ______________ Zoning District: _______________ ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ • HAS PROJECT ATTENDED HTRC MEETING? (REQUIRED)  YES  NO • IS PROJECT A CONTRIBUTING STRUCTURE?  O OR NON-CONTRIBUTING STRUCTURE:  FOR A LIST OF CONTRIBUTING OR NON-CONTRIBUTING STRUCTURES, PLEASE SEE: https://cityofbeaufort.org/350/Beaufort-County-Historic-Sites-Survey APPLICABILITY FOR HISTORIC REVIEW BOARD: Major discretionary review board (HDRB) approval shall apply to applications for Certification of Appropriateness per Section 9.10.2 for the following requests (please check all that apply):  New building(s) in Historic District  Changes to exterior materials of Contributing Structures  Additions to Contributing Structures  Non-similar roof replacement on Contributing Structures (roof with different materials)  Window replacements on Contributing Structures  Major changes to a Contributing or Non-contributing Site  Demolition  Other changes to exterior of Contributing Structures SUBMITTAL REQUIREMENTS: All forms and information shall be submitted digitally + 5 hard copies of all documents. In addition to a complete application form, applicants shall submit the required items according to the checklists on the subsequent page. Pursuant to Section 6-29-1145 of the South Carolina Code of Laws, is this tract or parcel restricted by any recorded covenant that is contrary to, conflicts with, or prohibits the activity described in this application?  Yes  No APPLICANT, PROPERTY, AND PROJECT INFORMATION: APPLICANT NAME: APPLICANT ADDRESS: APPLICANT E-MAIL: APPLICANT PHONE NUMBER: APPLICANT TITLE:  Homeowner  Tenant  Architect  Engineer  Developer HISTORIC REVIEW APPLICATION MAJOR REVIEW (HISTORIC REVIEW BOARD) Community Development Department 1911 Boundary Street, Beaufort, South Carolina, 29902 Application Fee: p. (843) 525-7011 / f. (843) 986-5606 see attached schedule Email: development@cityofbeaufort.org / Website: www.cityofbeaufort.org OW NER (IF OTHER THAN THE APPLICANT): OWNER ADDRESS: PROPERTY ADDRESS: PROPERTY IDENTIFICATION NUMBER (TAX MAP & PARCEL NUMBER): PROVIDE A BRIEF PROJECT NARRATIVE: (Attach any necessary documentation, spec sheets, pictures, paint swatches, etc.): CERTIFICATION OF CORRECTNESS: I/we certify that the information in this application is correct. APPLICANT’S SIGNATURE: DATE: _____ OWNER’S SIGNATURE: _________________________________ DATE: __________________ (The owner’s signature is required if the applicant is not the owner.) SCH EDULE: The Historic Review Board (HRB) typically meets the 2nd Wednesday of each month at 2pm. Staff will schedule HRB meeting after HTRC and review of application submittal for completeness and compliance with the Beaufort Preservation Manual and the City of Beaufort Development Code. CONTACT INFORMATION: City of Beaufort Community Development Department 1911 Boundary Street, Beaufort, South Carolina 29902 E-Mail: development@cityofbeaufort.org | Phone: (843) 525-7011 | Fax: (843) 986-5606 City of Beaufort Certificate of Appropriateness Checklists 1 Revised Dec. 10, 2021 Revised June 10, 2021 HISTORIC DISTRICT REVIEW BOARD CERTIFICATE OF APPROPRIATENESS Application Requirements The Beaufort Code applies to all projects; the Historic District Infill Design Guidelines in Section 4.7 apply to new construction in the Historic District. The Historic Review Board also utilizes the following documents when evaluating projects: • The Beaufort Preservation Manual & Supplement: these standards apply to New Construction, Alterations and Additions to Contributing Structures, and Demolition located everywhere in the Historic District except the Northwest Quadrant. • The Northwest Quadrant Design Guidelines: these standards apply to New Construction, Alterations and Additions to Contributing Structures, and Demolition located in the Northwest Quadrant of the Historic District • The Secretary of the Interior’s Standards for Rehabilitation: these standards apply to all modifications to Contributing Structures throughout the Historic District All documents can be found online at www.cityofbeaufort.org • The Beaufort Code can be found here: http://www.cityofbeaufort.org/434/Zoning • Documents specific to the Historic District, a map of the Historic District and neighborhoods, and the list of Contributing and Non-Contributing Structures can be found here: http://www.cityofbeaufort.org/350/1997-Beaufort-County-Historic- Sites-Surv NOTE 1: If a New Construction project also requires major demolition a separate application is required. (Refer to the Checklist for Demolition on page 3). NOTE 2: Applications will not be considered complete until all the required items have been submitted. Incomplete applications will not be placed on the agenda. NOTE 3: Applications are to be compiled in the order in which the applicant plans to present the application to the Board during the meeting. City of Beaufort Certificate of Appropriateness Checklists 3 Revised Dec. 10, 2021 Submission Requirements for Change After Certification Please submit DIGITAL FILES ONLY via email to: development@cityofbeaufort.org Change After Certification: □ Copy of Certificate of Appropriateness received with previous approval. □ Previously Approved Drawings: Applicant to submit complete set of previously approved documents. Current proposed documents to be interlaced between previously approved documents and must be formatted to match previously approved. For example, previously approved elevations should be followed by current proposed. Drawings to be clearly noted as “Previously Approved” or “Current Proposed”, and all proposed revisions in the current proposed drawings must be clouded and noted. Sheet Number Sheet Name 0.0 TITLE SHEET A1.0 SITE PLAN AND EXISTING SURVEY A2.1 PLANS A3.1 ELEVATIONS A3.2 3D VIEWS A4.1 BUILDING AND WALL SECTIONS 2024 All Rights ReservedC 1 A4.3 1 A4.1 1 A5.1 1 15.75' A 1 1 GYPSUM WALLBOARD (LARGE SCALE) ACOUSTIC TILE CARPET & PAD GYPSUM WALL BOARD (ELEVATION) FLASHING, ETC BRICK (ELEVATION) HORIZONTAL SIDING (ELEVATION) ROOF SHINGLES (ELEVATION) WATERPROOFING, FELT, CONTINUOUS BLOCKING ROUGH LUMBER ROUGH LUMBEREARTH GRAVEL FINISH WOOD INSULATION BATTS RIGID INSULATION PLYWOOD (LARGE SCALE) PLYWOOD (SMALL SCALE) CONCRETE C.M.U. BRICK STEEL DETAIL-NO. SHEET-NO. ENLARGED DETAIL INDICATOR SHEET-NO. DETAIL-NO. SECTION CUT INDICATOR INTERIOR ELEVATION INDICATOR WINDOW MARK DOOR MARK ELEVATION ABOVE MEAN SEA LEVEL DETAIL-NO. SHEET-NO. OR OTHER SPECIFIED DATUM WALL TYPE REVISION NUMBER Refrigerator Roof Drain Radius Riser Room Roof Joist Required Revision Reinforcing Rough Opening Sheet Shelf Schedule Square Foot Square Specification Similar Solid Masonry Pier Stainless Steel Solid Core Wood Telephone Tread Suspended Steel Top of Steel Through Threshold Thick Top of Plate Typical Top of Slab Without Wood With Vertical Unless Otherwise Noted Verify in Field Vinyl Composition Tile Top of Sheathing Standard Quanity R. Floor Foot FL. F.D. GA. FT. F.J. Hose Bib GYP.BD. GALV. H.M. HCWD. H.B. Gauge Hollow Metal Gypsum Board Galvanized Floor Joist Floor Drain Hollow Core Wood Height Lavatory Laminate Kitchen HGT. HORIZ. LAV. LAM. KIT. Masonry Light Maximum LT. MAS. MEMB. MECH. MAX. Membrane Mechanical Horizontal A.F.F. ADJ. ABV. BD. APPROX. ANG. ALT. ALUM. Board Approximate Angle Alternate Aluminum Above Finish Floor Adjacent Above BOT. BSMT. BM. BLKG. L CLO. CLG. C.T. C CAB. Closet Ceiling Ceramic Tile Center Line Cabinet Bottom Basement Beam Blocking BuildingBLDG. T.Minimum MFR. MET. M.O. MISC. MIN. N.I.C. O.D. O.C. N.T.S. Outside Diameter On Center Not To Scale Not In Contract Masonry Opening Miscellaneous Manufacturer Optional Plate Precast OPT. OPNG. PL. P.LAM. P.C. Pair Plywood PR. PLYWD. P.S.I. P.S.F. P.T. Pounds Per Square Inch Pounds Per Square Foot Pressure Treated Plastic Laminate Opening CONC. COL. CMU. C.O. DIA. D.F. DTL. DEPT. CONT. Dimension Diameter Drinking Fountain Detail Department Continuous Concrete Column Concrete Masonry Unit Cased Opening EA. DWG. DS. DN. EQUIP. EQ. EMER. ELEC. EL. E.J. Equipment Equal Emergency Electrical Elevation Expansion Joint Each Drawing Down Spout Down DIM. Metal CentimeterCM. ExteriorEXT. UON. S.M.P. REF. W/O WD. W/ V.I.F. VERT. VCT. TYP. T.O.SL. T.O.SH. T.O.S. T.O.P. THRU. THRES. THK. TEL. SUSP. STL. STD. S.S. SQ. SPEC. SIM. SHT. SH. SCWD. SCHED. R.O. RM. R.J. REQD. REV. REINF. R.D. RAD. QTY. S.F. Weight Welded Wire Fabric P.V.C. Polyvinyl Chloride E.W. EXIST. Each Way Existing WWF WT. WaterproofingPainted WP.PTD. SYMBOLS INDEX OF DRAWINGSSPECIFICATIONSABBREVIATIONS MATERIALS EXTERIOR ELEVATION INDICATOR A5.1 1 SHEET-NO. DETAIL-NO. LOCATOR MAP BUILDING INFORMATION 3 24 Finished Room Over GarageFROG NOT FOR CONSTRUCTION 2/28/2025 11:03:18 AM 0.0 TITLE SHEET GASKIN RESIDENCE HRB REVIEW 510 CRAVEN STREET 2.28.2025 GASKIN RESIDENCE 510 CRAVEN STREET LIVE OAK EXISTING TERRACES MAIN HOUSE EXISTING GUEST HOUSE EXISTING PARKING EXISTING PORCH TO BE ENCLOSED EXISTING PORCH TO REMAIN NEW WOOD STAIR NEW BRICK ON GRADE STAIR LANDING EXISTING GATE TO REMAIN EXISTING POTOCARPUS HEDGE TO REMAIN NEW GARDEN SHED 2024 All Rights ReservedC NOT FOR CONSTRUCTION 2/28/2025 11:03:19 AM A1.0 SITE PLAN AND EXISTING SURVEY GASKIN RESIDENCE HRB REVIEW 510 CRAVEN STREET 2.28.2025 N 1" = 10'-0"1 SITE PLAN 3 A4.1 1' - 0" 1' - 8" 1' - 0" 8"2' - 8"1' - 0" CENTER NEW PIER ON EXISTING PIER NEW LATTICE TO MATCH EXISTING NEW CMU PIERS WITH STUCCO FINISH TO MATCH EXISTING ON 8"X16" CONC. FOOTING EXISTING FOUNDATION TO REMAIN REMOVE EXISTING STAIR NEW BRICK STAIR LANDING ON GRAVEL BASE EXISTING BBQ RELOCATE GAS PIPING TO BBQ GRILL 90.00° 90.00° 8' - 4" 7' - 0" 5 A4.1 1 A4.1 3' - 4" 2' - 4" EXISTING FOUNDATION = EXISTING = NEW CUT PATTERN = EXISTING = NEW SURFACE PATTERN PHASE LEGEND 2024 All Rights ReservedC NOT FOR CONSTRUCTION 2/28/2025 11:03:21 AM A2.0 FOUNDATION PLAN GASKIN RESIDENCE HRB REVIEW 510 CRAVEN STREET 2.28.2025 1/4" = 1'-0"1 FOUNDATION 1/4" = 1'-0" PHASE LEGEND PV PANELS PV PANELS A3.1 A3.1 1 2 3 A4.1 NEW STREET A4.1 2 3 5 A4.1 2' - 4" 2' - 0" 2' - 8" GARDEN TOOLS 1 A4.1 EXISTING CABINETS TO REMAIN NEW FLOOR TO MATCH EXISTING NEW SCONCE NEW FAN NEW STEP LIGHTS 4" CONC. SLAB BELOW BRICK FINISH 2X2 LED NEW BRICK ON GRADE STAIR LANDING MATCH EXISTING EXISTING GATE TO REMAIN EXISTING POTOCARPUS HEDGE TO REMAIN RELOCATE GAS LINE TO GRILL EXISTING WALKS TO REMAIN EXISTING WALKS TO REMAIN PORCH FAMILY ROOM GARDEN SHED TERRACE 2' - 8" 3' - 4" 2' - 4" 8' - 4" 7' - 8 1/2" NEW WOOD STAIRS 15" TREADS SEE DETAIL SHEET A4.1 6X6 POSTS LOUVERED PANELS EXISTING HOLLY TO REMAIN 3 A4.1 EXISTING DROPPED BEAMS NEW DROPPED BEAMS TO MATCH EXISTING 1X6 T&G CYPRESS CEILING W/ CLEAR FINISH 1 A4.1 NEW CEILING FAN MOTORIZED SHADES MOTORIZED SHADES = EXISTING = NEW CUT PATTERN = EXISTING = NEW SURFACE PATTERN PHASE LEGEND 2024 All Rights ReservedC NOT FOR CONSTRUCTION 2/28/2025 11:03:22 AM A2.1 PLANS GASKIN RESIDENCE HRB REVIEW 510 CRAVEN STREET 2.28.2025 1/8" = 1'-0"2 ROOF PLAN 1/4" = 1'-0"1 FIRST FLOOR 1/4" = 1'-0"3 FIRST FLOOR CEILING PLAN REPLACE EXISTING DECKING W/ KDAT 5/4X4 T&G PAINTED TO MATCH EXISTING NEW CMU PIERS WITH STUCCO FINSH TO MATCH EXISTING LATTICE TO MATCH EXISTING NEW DOOR AND TRANSOM UNIT 2 1/4" SAPELE PAINTED TO MATCH TRIM NEW CASEMENT WINDOWS TO MATCH EXISTING NEW 5" 1/2 ROUND GUTTER AND 4" DOWNSPOUT MATCH ROOF COLOR NEW RAILING TO MATCH EXISTING REAR RAILING NEW STAIR 6" RISERS 15" TREADS SEE DETAIL A4.1 EXISTING CASEMENT WINDOWS NEW CASEMENT WINDOWS TO MATCH EXISTING EXISTING WOOD PANEL NEW WOOD STAIR EXISTING FOUNDATION TO REMAIN NEW AWNING WINDOWS NEW BAND BOARD TO MATCH EXISTING BUILD ING TO REMAIN AS IS NEW SOLAR PANELS ON EXISTING LOW PITCHED ROOF GUEST HOUSE TO REMAIN AS IS EXCEPT NEW SOLAR PANELS AND GARDEN SHED 5 A4.1 NEW GARDEN SHED STUCCO BASE TO MATCH EXISTING FOUNDATION SHUTTER PANELS TO MATCH EXISTING 2X WOOD SILL WOOD PANEL PAINT TO MATCH FOUNDATION 2X WOOD FRAME 1 A4.1 5" 1/2 ROUND GUTTER W/ 4" ROUND DOWN SPOUT MATCH ROOF COLOR EXISTING ROOF RETURN MATCH EXISTING ROOF RETURN HERE 4' - 5" ROOF TO MATCH EXISTING STUCCO TO MATCH EXISTING PAINT TO MATCH EXISTING LOUVERS TO MATCH EXISTING 2 1/4" SAPELE DOOR W/ LOUVERED PANEL = EXISTING = NEW CUT PATTERN = EXISTING = NEW SURFACE PATTERN PHASE LEGEND 2024 All Rights ReservedC NOT FOR CONSTRUCTION 2/28/2025 11:03:24 AM A3.1 ELEVATIONS GASKIN RESIDENCE HRB REVIEW 510 CRAVEN STREET 2.28.2025 1/4" = 1'-0"1 SOUTH ELEVATION 1/4" = 1'-0"2 WEST ELEVATION EXISTIING BUILDING 1/4" = 1'-0"3 NORTH ELEVATION GARDEN SHED NEW GARDEN SHED PAINT TO MATCH EXISTING FOUNDATION NEW ROOF RETURN TO MATCH EXISTING EXISTING ROOF RETURN ROOF CRICKET = EXISTING = NEW CUT PATTERN = EXISTING = NEW SURFACE PATTERN PHASE LEGEND 2024 All Rights ReservedC NOT FOR CONSTRUCTION 2/28/2025 11:03:25 AM A3.2 3D VIEWS GASKIN RESIDENCE HRB REVIEW 510 CRAVEN STREET 2.28.2025 SEE TYPICAL WALL SECTION (4/A4.1) AND DETAIL SHEETS FOR DETAILS. 1 NORTHEAST 3D VIEW 2 SOUTHEAST 3D VIEW EXISTING CASEMENT WINDOWS NEW CASEMENT WINDOWS TO MATCH EXISTING EXISTING CASED OPENING AND TRANSOM 65" TV NEW STAIR NEW DECKING ON EXISTING FLOOR FRAMING ORIGINAL WALL TO REMAIN NEW WOOD DOOR AND TRANSOM 1 A4.1 2x4 TO RUN ALONG STRINGERS STRINGER 1x SKIRT AND RISER (PAINTED) MITER PERIMETER LANDING AS SPECIFIED FOR 15" TREADS: 5/4x6 W/ 5/4X6 PERIMETER, SPACE BOARDS 1/4" SEE STRUCTURAL DWGS FOR FOOTING SIZE & DETAILS 2x4 TO SPAN BTWN STRINGERS - NOTCH INTO STRINGERS ALL WOOD TO BE KDAT-[ TREADS TO BE PAINTED TO MATCH PORCH DECKING AND RISERS-SKIRT TRIM COLOR EXISTING 7" SQ. POST ALUM. FACTORY FINISHED FLASHING COLOR TO MATCH TRIM CUT INTO POST 1/4" SEAL WITH ZIP LIQUID FLASHING BELOW FLASHING 1/2" ZIP SYSTEM SHEATHING ON 2X4 FRAMING WITH R-19 INSULATION BENJAMIN OBDYKE SLICKER MAX RAINSCREEN 6MM INSTALL 2X (FLOOR FRAMING DEPTH ) PERPENDICULAR BLOCKING AT 16" O.C. UNDER NEW WALL. INSTALL COVER TRIM AFTER ROLLER SHADE PAINTED 1X WOOD SHADE BOX CYPRESS 1X6 T&G CEILING EXISTING PORCH FLOOR, STUCCO FOUNDATION TO REMAIN R-19 CLOSED CELL SPRAY INSULATION EXISTING ROOF, COLUMNS, FASCAI AND BEAM TO REMAIN NEW SOLAR PANELS NEW CASEMENT WINDOW TO MATCH EXISTING NEW AWNING WINDOW MATCH EXISTING NEW 2X4 BASEBOARD AND TRIM TO MATCH EXISTING 2X FRAMING TO ALIGN FLOOR WITH EXISTING 3/4" ADVANTECH FLOOR SHEATHING AND PINE FLOOR TO MATCH EXISTING NEW ROOF TO MATCH EXISTING ON 3/4" ROOF SHEATHING, AND 1X6 PAINTED PINE 4X4 KDAT ROOF RAFTERS BEAM SEE ELEVATION ALUM. FLASHING MATCH ROOF FIXED LOUVER TO MATCH EXISTING PAINT SAME COLOR 8" CMU WALL WITH STUCCO FINISH TO MATCH EXISTING 8"X16" CONCRETE FOOTING W/ 2 #5 REINFOR. BARS CONTINUOUS AND 1 VERTICAL EVERY CORNER AND 32" O.C. MAX. EXISTING SIDING EXISTING BAND EXISTING LATTICE 4" CONC. SLAB 2024 All Rights ReservedC NOT FOR CONSTRUCTION 2/28/2025 11:03:26 AM A4.1 BUILDING AND WALL SECTIONS GASKIN RESIDENCE HRB REVIEW 510 CRAVEN STREET 2.28.2025 1/2" = 1'-0"2 FAMILY ROOM EAST WALL 1/2" = 1'-0"3 SECTION AT EXISTING PORCH 1/2" = 1'-0"4 EXTERIOR WOOD STAIR 1" = 1'-0"1 SECTION AT NEW WINDOWS 3/4" = 1'-0"5 SECTION AT GARDEN SHED Darlana Small Tall Bracketed Wall Lantern Designer: Chapman & Myers Item # CHO 2086BZ TEAR SHEET Height: 21.25" Width: 7.5" Extension: 9.75" Backplate: 4" x 13" Rectangle Finishes: BZ Glass Options: CG Socket: 2 - E12 Candelabra Wattage: 2 - 60 C11 Weight: 15 Pounds Note: Requires Smaller Outlet Box ©EFC DESIGNS Fixture "B" Image File Name:  F523L-WHF.jpg Aluma Wet  - LED 52" Ceiling Fan Item #: F523L-WHF UPC Code: 706411065262 Product Family Name: Aluma Finish: Flat White Category: EXTERIOR FAN Category Type: Ceiling Fan Certification: E75795 Patents: Notes: LED Wet Location UL Listed MEASUREMENTS Blade Finish: Blade Material: ABS Blade Sweep: 52" No. of Blades: 4 Blade Pitch: 12 Reversible Blades: NO Slope: YES Hanging Weight: 19.18 Downrod 1: 6 Downrod 1 Outside Dia: .75 Downroad 2: Downrod 2 Outside Dia: Ceiling to Lowest Point: (Dim A): 16.25 Ceiling to Blade (Dim B): 12.91 Lead Wire: 80 Power: AC Motor Size: AC 153 X 20 MM Low Low/Med. Medium Med/High High RPM 71 154 Amps 0.216 0.436 Watts 13.16 50.02 CFM 1861.0 3864.0 CFM/Watts 141.41 77.25 LAMPING No. of Bulbs: 1 Max Bulb Wattage: 20 Light Type: Z04 LED Light Kit Optional: NO Socket: Y06 LED MODULE Integrated Light Kit: YES Dimmable: YES Ballast: Rated Life Hours: 20000 Uplight: NO Bulb/LED Included: YES Color Temp.: 3000 CRI: 92 Initial Lumens: 1652.25 Delivered Lumens: 905.2 GLASS Description: ETCHED OPAL Material: GLASS Part No.: Quantity: 1 Width: 9.25 Height: 2.75 Length: 9.25 CONTROLS Pull Chain Control: NO Works with Remote Control: YES Works with Wall Control: YES Reversible: YES Included Remote Control: RCS213 Included Wall Control: Smart Control: NO Compatible Remote Control(s): Compatible Wall Control(s): WCS213 Integrated Smart Control: Compatible Smart Control: BD-1000 SHIPPING Carton Width: 11.88 Carton Height: 10.25 Carton Length: 24.0 Carton Weight: 22.02 Carton Cubic Feet: 1.691 Small Package Shippable: YES Master Pack Width: Master Pack Height: Master Pack Length: Master Pack Weight: Master Cubic Feet: Multi-Pack: 1 Master Pack: 1 WARNING: Handling this productcan expose you to chemicals including lead, which is known to the State ofCalifornia to cause cancer and birth defects or other reproductive harm. Wash hands with soap and water after installing, handling, cleaning or otherwise touching this product. For more information go to: www.P65Warnings.ca.gov. For additional information, please contactCustomer Care: 1-800-221-7977 | Productdepicted on this specsheetis protected byUnited States Federal and/or State laws including US Patent, Trademark and/or Copyrightand unfair competition laws. Unauthorized reproduction or use carries severe legal penalties. Rev 01.10.2024 01:45 PM Fixture "E" Fixture Type: Catalog Number: Project: Location: WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. DEC 2021 waclighting.com Phone (800) 526.2588 Fax (800) 526.2585 Headquarters/Eastern Distribution Center 44 Harbor Park Drive Port Washington, NY 11050 Central Distribution Center 1600 Distribution Ct Lithia Springs, GA 30122 Western Distribution Center 1750 Archibald Avenue Ontario, CA 91760 Model: WL-LED100 LEDme® Step Light FEATURES • Solid diecast brass, corrosion resistant aluminum alloy, or cast stainless steel construction • Direct wiring, no driver needed • • 54,000 hour rated life • Balanced lighting, free of shadows with minimum glare • IP66 rated, Protected against high-pressure water jets • • 5 year WAC Lighting product warranty ORDER NUMBER 120V Model # Light Color Finish WL-LED100 120V C AM RD BL White Amber Red Blue 3000K 27 Warm 2700K 610nm 640nm 450nm BK BN* BZ GH SS WT Black on Aluminum Brushed Nickel on Aluminum Bronze on Aluminum Graphite on Aluminum Stainless Steel White on Aluminum WL-LED100 120V C AM White Amber 3000K 27 Warm 2700K 610nm BBR Bronze on brass *Brushed Nickel Finish is for interior use only 277V Model # Light Color Finish WL-LED100F 277V C AM RD BL White Amber Red Blue 3000K 610nm 640nm 450nm BK BN* BZ GH SS WT Black on Aluminum Brushed Nickel on Aluminum Bronze on Aluminum Graphite on Aluminum Stainless Steel White on Aluminum – – Example: WL-LED100F-BL-SS PRODUCT DESCRIPTION Horizontal rectangle LEDme® Step Light. Designed for safety and style on stairways, patios, decks, balcony areas, walkways and building perimeters. indoor and outdoor lighting solutions. Creates an attractive, romantic impression at night. 5" 3" 2a" 18" front 12" 18" x" 2" side 1d" 22" back SPECIFICA TIONS Construction: Die-cast aluminum or 316 marine grade cast stainless steel Power: Direct wiring, no remote driver needed. Input voltage: 120V or 277VAC 50/60Hz Light Source: 2700K or 3000K CCT Samsung HV-AC High Power LED, CRI: 90 Optional color lenses. Total power consumption of 3.5W Mounting: Fits into 2” × 4” J-Box with minimum inside dimensions of 3"L × 2"W × 2"H Includes bracket for J-Box mount. Dimming: Dim to 10% with electronic low voltage (ELV) dimmer Approved dimmers: Lutron Nova-T NTELV-300 & NTELV-600, Lutron Vietri VTELV-600, Lutron Diva DVELV-300P , Lutron Skylark SELV-300P , Lutron Maestro MAELV-600 Standards: IP66, UL & cUL Listed for wet locations, Title 24 JA8-2016 Compliant. 2"NPT threaded hole BREAKING THE 20 % EFFICIENCY BARRIER Q.ANTUM DUO Z Technology with zero gap cell layout boosts module efficiency up to 21.4 %. THE MOST THOROUGH TESTING PROGRAMME IN THE INDUSTRY Q CELLS is the first solar module manufacturer to pass the most comprehen- sive quality programme in the industry: The new “Quality Controlled PV” o f the independent certification institute TÜV Rheinland. INNOVATIVE ALL-WEATHER TECHNOLOGY Optimal yields, whatever the weather with excellent low-light and temperature behavior. ENDURING HIGH PERFORMANCE Long-term yield security with Anti LID Technology, Anti PID Technology1, Hot-Spot Protect and Traceable Quality Tra.Q™. EXTREME WEATHER RATING High-tech aluminum alloy frame, certified for high snow (5400 Pa) and wind loads (4000 Pa). A RELIABLE INVESTMENT Inclusive 12-year product warranty and 25-year linear performance warranty 2. 1 APT test conditions according to IEC / TS 62804-1:2015, method A (−1500 V, 96 h) 2 See data sheet on rear for further information. THE IDEAL SOLUTION FOR: Rooftop arrays on residential buildings Q.PEAK DUO ML-G10.a 395-415 ENDURING HIGH PERFORMANCE 76.4 in 1940 mm 43.3 in 1100 mm 48.0 in 1220 mm 1656 lbs 751 kg 24 24 32 α [% / K] +0.04 β [% / K] −0.27 γ [% / K] −0.34 NMOT [°F] 109 ± 5.4 (43 ± 3 °C) Hanwha Q CELLS America Inc. 400 Spectrum Center Drive, Suite 1400, Irvine, CA 92618, USA | TEL +1 949 748 59 96 | EMAIL inquiry@us.q-cells.com | WEB www.q-cells.us [V] 1000 (IEC) / 1000 (UL) Class II [A DC] 20 TYPE 2 [lbs/ft 2] 75 (3600 Pa) / 55 (2660 Pa) −40 °F up to +185 °F (−40 °C up to +85 °C)[lbs/ft 2] 113 (5400 Pa) / 84 (4000 Pa) 3 See Installation Manual 395 400 405 410 415 [W] 395 400 405 410 415 [A] 11.13 11.16 11.19 11.22 11.26 [V] 45.03 45.06 45.09 45.13 45.16 [A] 10.58 10.64 10.70 10.76 10.82 [V] 37.32 37.59 37.85 38.11 38.37 [%] ≥ 20.1 ≥ 20.4 ≥ 20.6 ≥ 20.9 ≥ 21.1 [W] 296.4 300.1 303.9 307.6 311.4 [A] 8.97 8.99 9.02 9.04 9.07 [V] 42.46 42.49 42.52 42.56 42.59 [A] 8.33 8.38 8.43 8.48 8.53 [V] 35.59 35.82 36.04 36.27 36.49 53' 40' HC Certified UL 61730 MECHANICAL SPECIFICATION Format 74.0 in × 41.1 in × 1.26 in (including frame) (1879 mm × 1045 mm × 32 mm) Weight 48.5 lbs (22.0 kg) Front Cover 0.13 in (3.2 mm) thermally pre-stressed glass with anti-reflection technology Back Cover Composite film Frame Black anodized aluminum Cell 6 × 22 monocrystalline Q.ANTUM solar half cells Junction Box 2.09-3.98 in × 1.26-2.36 in × 0.59-0.71 in (53-101 mm × 32-60 mm × 15-18 mm), IP67, with bypass diodes Cable 4 mm² Solar cable; (+) ≥ 49.2 in (1250 mm), (−) ≥ 49.2 in (1250 mm) Connector Stäubli MC4, Hanwha Q CELLS HQC4; IP68 Note: Installation instructions must be followed. See the installation and o perating manual or contact our technical service department for furthe r information on approved installation and use of this product. Specifications subject to technical changes © Q CELLS Q.PEAK DUO ML-G10.a_395-415_2021-05_Rev01_NA ELECTRICAL CHARACTERISTICS POWER CLASS MINIMUM PERFORMANCE AT STANDARD TEST CONDITIONS, STC 1 (POWER TOLERANCE +5 W / −0 W) Minimum Power at MPP 1 PMPP Short Circuit Current 1 ISC Open Circuit Voltage 1 VOC Current at MPP IMPP Voltage at MPP VMPP Efficiency 1 η MINIMUM PERFORMANCE AT NORMAL OPERATING CONDITIONS, NMOT 2 Minimum Power at MPP PMPP Short Circuit Current ISC Open Circuit Voltage VOC Current at MPP IMPP Voltage at MPP VMPP 1Measurement tolerances P MPP ± 3 %; ISC; VOC ± 5 % at STC: 1000 W/m2, 25 ± 2 °C, AM 1.5 according to IEC 60904-3 • 2800 W/m², NMOT, spectrum AM 1.5 Q CELLS PERFORMANCE WARRANTY PERFORMANCE AT LOW IRRADIANCE At least 98 % of nominal power during first year. Thereafter max. 0.5 % degradation per year. At least 93.5 % of nominal power up to 10 years. At least 86 % of nominal power up to 25 years. All data within measurement toleranc - es. Full warranties in accordance with the warranty terms of the Q CELLS sales organisation of your respective country. Typical module performance under low irradiance conditions in comparison to STC conditions (25 °C, 1000 W/m²) TEMPERATURE COEFFICIENTS Temperature Coefficient of I SC Temperature Coefficient of V OC Temperature Coefficient of P MPP Nominal Module Operating Temperature PROPERTIES FOR SYSTEM DESIGN Maximum System Voltage V SYS PV module classification Maximum Series Fuse Rating Fire Rating based on ANSI / UL 61730 Max. Design Load, Push / Pull 3 Permitted Module Temperature on Continuous DutyMax. Test Load, Push / Pull 3 NA DETAIL A 0.63" (16 mm) 0.33" (8.5 mm)0.96" (24.5 mm) 42.8" (1088 mm) 74.0" (1879 mm) 4 × Mounting slots (DETAIL A) Frame 41.1" (1045 mm) 39.2" (996 mm) 1.26" (32 mm) 8 × Drainage holes 15.6“ (395.5 mm) 4 × Grounding points ø 0.18" (4.5 mm) Label ≥ 49.2" (1250 mm) ≥ 49.2" (1250 mm) RELATIVE EFFICIENCY COMPARED TO NOMINAL POWER [%] YEARS Q CELLS Industry standard for linear warranties* *Standard terms of guarantee for the 10 PV companies with the highest production capacity in 2014 (as at: September 2014) 100 95 90 85 80 15 5 25 20 0 10 98 86 200 400 600 800 1000 110 100 90 80 RELATIVE EFFICIENCY [%] IRRADIANCE [W/m²] QUALIFICATIONS AND CERTIFICATES PACKAGING INFORMATION UL 61730, CE-compliant, Quality Controlled PV - TÜV Rheinland, IEC 61215:2016, IEC 61730:2016, U.S. Patent No. 9,893,215 (solar cells), QCPV Certification ongoing. Horizontal packaging pallets pallets modules STAFF REPORT: Historic District Review Board (HRB) 510 CRAVEN STREET – Approval DATE: March 12, 2025 Background: The applicant has attended 2 rounds of HTRC meetings and is ready for a meeting with the Historic District Review Board (HRB) to present a partial enclosure of the rear porch of the contributing ca. 1885 house at 510 Craven Street. Tree Removal Proposed: No trees are proposed to be removed. GENERAL INFORMATION Applicant: Michael Frederick, Frederick + Frederick Architects Site Location/Address: 510 Craven Street; R120 004 000 0890 0000 Applicant's Request: Applicant is proposing a partial enclosure of the rear porch. Current Zoning: T4-HN Contributing/Neighborhood Contributing Structure (ca. 1885) as per Nat’l Register of Historic Places Flood Zone/Base Flood Flood Zone: Shaded X/AE Elevation: ~8’-9’ Existing Trees 1 Live Oak at front of property (unaffected by plans) ZONING DISTRICT INFORMATION T4-HN Lot Width at Setback: 40 ft min. 60 ft min. in The Point Max Lot Coverage: 55% of lot area Min. Frontage Build Out 75% max Front Setback Average Prevailing Setback on Block Side Setback 6 ft min. 10 ft min. in The Point 5 ft min. corner/alley Rear Setback 15 ft min. Building Height: 3 stories max SURROUNDING ZONING, LAND USE AND REQUIRED BUFFERS Adjacent Zoning Adjacent Land Uses Setbacks for Adjacent Zoning /Buffer required if rezoned North: T4-HN Single Family Residential N/A South: T4-HN Single Family Residential N/A East: T4-HN Single Family Residential N/A West: T4-HN Single Family Residential N/A 2 Surrounding Area: This property is in The Point neighborhood. The buildings on the block and surrounding area are made up of historic structures. Most of the buildings are two stories high, with a few one-story buildings throughout. This specific single family residential dwelling is an 1885 historic home, and as such is a contributing resource on the National Register of Historic Places for the Beaufort Historic District. Determination of adequate historic integrity for New Construction, Infill, Additions and Demolition: As per the Beaufort Preservation Manual (Chapter 5) and the Beaufort Development Code (Section 4.7), new infill construction as well as major renovations to existing structures must be conducted in consideration to the architectural fabric of the community. This can be successfully achieved by adhering to the following principles: 1. Location, 2. Design, 3. Setting, 4. Materials, 5. Workmanship, 6. Feeling and 7. Association. As per these guidelines, the following staff analysis determines the integrity of this major renovation request. 4.7.2 Integrity Guidelines (as per the Beaufort Development Code) Rationale Present (yes/no) Staff Analysis of Rationale 1. Location: This is the relationship between the property and its historical context. Yes ✓ This single-family residential dwelling from 1885 can be historically tied to many similar houses in The Point neighborhood. 2. Design: This is the combination of elements that create the feeling of a district or structure. These elements include building patterns, streetscapes, site elements, building size, mass and scale, spatial relationships, and specific architectural elements and details. Yes ✓ There proposed design elements are compatible and keep with the historic theme of the neighborhood. 3. Setting: This is the physical environment of a property and should be evaluated on its context as well as on the historical role the property has played and continues to play. Important features include topography, vegetation, man-made Yes ✓ The surrounding properties are mainly residential dwellings of similar size (mostly 2-story contributing structures). This residential retrofit complies with its surroundings in use 3 features, and relationships between existing structures and their surroundings. and scale. 4. Materials: These are the physical elements that make up a property or district. Yes ✓ The proposed materials and design elements comply with the visual texture of The Point neighborhood. 5. Workmanship: This is the physical evidence of the crafts of a particular culture or time period. This particularly applies to rehabilitation projects, but for new infill projects, workmanship of surrounding structures should be considered and respected. Retaining the details of the original craft and craftsman (i.e., wood, masonry, tabby etc.) of the original building ensures the historic fabric is retained and serves as an important component of the integrity and the patina of age of individual structures and the district as a whole. Yes ✓ Staff is supportive of the proposed changes to the enclosed porch as this keeps the existing historic rear door and window, and only affects the area that was already altered in a previous addition. 6. Feeling: This is the property's expression of the aesthetic or historic sense of a particular period of time. This particularly applies to rehabilitation projects, but for new infill projects, the feeling of surrounding structures should be considered and respected. Yes ✓ The proposed design features aesthetically represent the historic period of the building, and helps it maintain the historic feeling of the neighborhood. 7. Association: This is the direct link between an important historic event or person and a property. This particularly applies to rehabilitation projects, but for new infill projects, association of particular sites and neighborhoods considered. N/A ✓ Staff has not found any relevant history or persons directly linked to this specific property. Synopsis of staff comments from last Historic District Technical Review Committee (HTRC) Meeting on February 05, 2025: • Planning and zoning: ➢ Contributing Structure (ca. 1885) ➢ Zoned T4-HN 4 • Architecture: ➢ Staff is supportive of the proposed changes to the enclosed porch as this keeps the existing historic rear door and window and only affects the area that was already altered in a previous addition ➢ Provide detailed drawings of new window/doors, eave, column, etc. FINDINGS AND RECOMMENDATIONS Staff Recommendation: Staff recommends Final Approval of the proposed partial porch enclosure as submitted, in that it satisfies the intent of the Beaufort Preservation Manual and requirements of the Beaufort Code, with the following conditions: 1) Staff supports the proposal to enclose part of the existing porch on the south façade. 2) Staff is in support of the solar panels on the one -story portion of the house as this area is least visible from New Street and Craven Street. 3) Staff recommends moving the triple -ganged windows on the New Street façade slightly to the north and away from the southernmost column – these windows are not symmetrical between the columns, creating a wider length of siding on the left side of the windows, while the right side seams to crowd against the southern column. 4) Staff is in support of the proposed changes to the garden shed. 5) Staff supports all lighting and fan selections. MEMO HDRB Joint Session SCOTT MARSHALL City Manager CITY OF BEAUFORT Community Development Department 1911 BOUNDARY STREET BEAUFORT, SC 29902 (843) 525-7011 FAX (843) 986-5606 CURT FREESE Community Development Director Date: March 12, 2025 From: Curt Freese, Community Development Director To: HDRB ISSUE: Joint Meeting PC BACKGROUND: There was discussion at the 2025 Strategic Planning session about proposed changes to Chapter 9 of the Development Code, related to the HDRB, such as changes to COA’s, Demolitions, findings, etc. The Development Code revisions were approved last June by the PC but have yet to move forward to a vote with the City Council. Both the chairman of the HDRB and PC agreed a joint meeting to discuss the recommended PC changes, with the opportunity for the HDRB to make recommendations based on their practical experience and knowledge of the proposed Chapter 9 recommendations. Staff proposes utilizing the April 15 th PC meeting at 5:00 pm for the joint meeting. MEMO HDRB Tour SCOTT MARSHALL City Manager CITY OF BEAUFORT Community Development Department 1911 BOUNDARY STREET BEAUFORT, SC 29902 (843) 525-7011 FAX (843) 986-5606 CURT FREESE Community Development Director Date: March 12, 2025 From: Curt Freese, Community Development Director To: HDRB ISSUE: Spring Tour BACKGROUND: Staff would like to propose a spring walking tour. Please find a proposed itinerary below, based on the comments at the February HDRB meeting. 9:00 am: Meet at 500 CARTERET STREET (Parking pass will be provided). Staff will organize a tour. 9:00-9:30 am: 903-905 King Street, New Construction 9:30-11:00 Tour of Stablization Properties: 810/812 Congress, 1305 Congress, 1008 West Street, 1408 Greene St, 710 Charles, 809 Charles, 1108 Washington, 908 Duke St., 910 Harrington Street, 1504 Prince. 11:00-11:45: 1401 Duke Street Rehab 11:45-12:30: Cuthbert House (porch materials), 1103 Bay Street 12:30-2: Lunch POSSIBLE DATES: FRIDAY MARCH 28 FRIDAY APRIL 4 FRIDAY APRIL 11

Source: City of Beaufort website. First collected Nov 14, 2026.