Land Management Ordinance Task Force Meeting — Agenda Packet
Town of Hilton Head Island · Beaufort County · Land Management Ordinance Task Force · meeting of May 7, 2026 · Agenda packets
Open the original document More from Town of Hilton Head Island
Text
Extracted automatically from the original. Tables and formatting may not survive; the original document is authoritative.
Town of Hilton Head Island
Land Management Ordinance Task Force Meeting
Thursday, May 7, 2026, 5:00 PM
1 Town Center Court, Hilton Head Island, SC
Benjamin M. Racusin Council Chambers
The meeting can be viewed on the Town’s YouTube Channel, the Beaufort County
Channel, and Spectrum Channel 1304.
1. Call to Order
2. Adoption of the Agenda
3. Approval of the Minutes
a. Regular Meeting Minutes of April 13, 2026
4. Workshop Discussion
a. Continued Discussion of Land Management Ordinance Amendments
5. Public Comment
6. Adjournment
FOIA Compliance: Public notification of this meeting has been published, posted, and
distributed in compliance with the South Carolina Freedom of Information Act and the
requirements of the Town of Hilton Head Island.
In accordance with the requirements of Title II of the Americans with Disabilities Act of
1990 ("ADA"), the Town of Hilton Head Island will not discriminate against qualified
individuals with disabilities on the basis of disability in its services, programs, or
activities. Auditory accommodations are available. Any person requiring further
accommodation should contact the Town of Hilton Head Island ADA Coordinator as
soon as possible but no later than 48 hours before the scheduled event.
Municipal Association of South Carolina (MASC) Civility Pledge:
“I pledge to build a stronger and more prosperous community by advocating for civil
engagement, respecting others and their viewpoints, and finding solutions for the
betterment of my city or town.”
Page 1 of 38
Town of Hilton Head Island Land Management Ordinance Task Force
Meeting Minutes
4/13/2026 Page | 1
Town of Hilton Head Island
LAND MANAGEMENT ORDINANCE TASK
FORCE MEETING
Monday, April 13, 2026, 5:00 PM
Minutes
1. Call to Order
The meeting was called to order at 5:00 pm.
In attendance: Chair Councilman Steve DeSimone, Vice Chair Councilwoman Tamara Becker,
and Task Force Members Town Manager Marc Orlando, Lavon Stevens, Louis Johnson,
Gregg Russell, Edwina Dunlap, Ciaran Storan, Lola Campbell, Mike Alsko, James
Wedgeworth, Eric Brehm, Ray Warco, Peter Kristian, Courtney Struna, Cliff McMackin, Judd
Carstens, Barbara Banaszynski, and Thomas Henz.
2. Adoption of the Agenda
Mr. Warco made a motion for the adoption of the agenda. Mr. Kristian seconded. Mr.
Wedgeworth was not present for the motion, which passed unanimously, 17-0.
3. Approval of the Minutes
a. Regular Meeting Minutes of March 26, 2026
Vice Chair Councilwoman Becker motioned to approve the regular meeting minutes of
March 26, 2026. Mr. Alsko seconded. Mr. Wedgeworth was not present for the motion,
which passed unanimously, 17-0.
4. Workshop Discussion
a. Continued Discussion of Land Management Ordinance Amendments
Chair Councilman Steve DeSimone opened the discussion by detailing that the meeting
would cover potential expansion of the Mitchelville Zoning District to include the section of
Mitchelville Road between Baygall and Fish Haul roads, density in the RM-4 (Low to
Moderate Density Residential) Zoning District, and further calibration in the Forest Beach
Neighborhood Character Overlay District.
Marc Orlando, Town Manager, opened the meeting by outlining the evening's agenda,
which focused on continued review of the Land Management Ordinance. Topics included
the Mitchellville Zoning District, the RM-4 density framework, input from the Gullah
Geechee Historic Neighborhood Community Development Corporation (GGHNCDC), and
the Forest Beach Neighborhood Character Overlay District. Trey Lowe, Interim Planning
Director, LMO Official, and Development Services Manager, followed with an overview of
the staff memo, noting that the amendments under review aim to align development
regulations with community priorities, neighborhood character, and long-term resiliency
Page 2 of 38
Town of Hilton Head Island Land Management Ordinance Task Force
Meeting Minutes
4/13/2026 Page | 2
goals. Staff emphasized that no final recommendations were being requested and that
the task force's role was to provide direction and refine concepts.
Regarding the Mitchellville Zoning District, Mr. Lowe presented a proposal to evaluate
extending Mitchellville zoning to parcels on both sides of Mitchellville Road between
Baygall and Fish Hall Roads. Key differences from the existing RM-8 and RM-12 zoning
included increased building height from 45 to 75 feet, maximum impervious coverage
from 35% to 50%, and the addition of uses such as hotels, timeshares, mixed use, and
various commercial categories. The GGHNCDC memo, submitted by Thomas Boxley,
Executive Director, requested that density in historic neighborhoods not fall below six
dwelling units per acre and that Mitchellville development components be extended
uniformly across the road. Task force members raised concerns about infrastructure
capacity, traffic, and the impact of high-intensity commercial uses on a predominantly
residential area. A polling exercise showed 71% of members did not support applying the
Mitchellville District in its entirety, however, the majority were in favor of evaluating
density and uses allowed in the area.
Regarding the RM-4 Zoning District, Shea Farrar, Principal Planner, presented data
showing the district encompasses 2,551 properties and approximately 1,588 acres, with
84% of historic neighborhood acreage zoned RM-4 and 65% of parcels under three
acres. The existing sliding scale density structure has produced inconsistent development
patterns, and the GGHNCDC recommended replacing it with a fixed six dwelling units per
net acre. A polling question on this change returned inconclusive results and was
deferred for further review. Members noted the tension between increasing land value for
property owners and the risk of accelerating land sales away from Native Islander
families, and broadly agreed that equity, community input, and intentional master planning
were essential to moving forward.
Regarding the Forest Beach Neighborhood Character Overlay District, Mr. Lowe
explained that the current 5,000 square foot floor area ratio cap has unintentionally
encouraged subdivision of larger parcels, resulting in larger homes on smaller lots and
changes to neighborhood character. Staff is seeking direction on recalibrating the
standards to better balance building size with lot size. Members noted the importance of
coordinating with existing HOA covenants and raised questions about differentiating
standards between the oceanside and landside portions of the neighborhood. Short-term
rental regulations were briefly raised but confirmed as a topic for a future meeting.
5. Public Comment
Public comment was received from ten speakers. Speakers from the Forest Beach community
expressed strong opposition to any restrictions on short-term rental rights, emphasizing
concerns about property values and equity relative to other island neighborhoods. A Native
Islander spoke in opposition to the proposed zoning changes, citing concerns about
displacement, increased property taxes, building height, and cultural erosion. Councilwoman
Melinda Tunner expressed support for a community meeting prior to any further action on
Mitchellville and noted existing infrastructure concerns along Fish Hall Road. Residents of the
Estuary community raised concerns about traffic safety and the intensity of potential
Page 3 of 38
Town of Hilton Head Island Land Management Ordinance Task Force
Meeting Minutes
4/13/2026 Page | 3
development adjacent to their neighborhood. Additional speakers called for staff to respond to
outstanding written questions submitted by the Gullah Geechee Legal Defense Fund, and
advocated for a density baseline of eight units per acre consistent with prior community
studies.
6. Adjournment
Mr. Orlando closed the meeting by confirming that the April 23 meeting is canceled, and that
the next meetings are scheduled for May 7 and May 21. The May 7 meeting will revisit the
RM-4 discussion and address subdivision regulations. The May 21 meeting will cover
timeshares and short-term rentals. Following those meetings, staff will take approximately 60
days to draft code amendments based on task force direction, which will then proceed through
the Gullah Geechee Task Force, Planning Commission, the Community Development and
Public Services Committee, and Town Council for two readings. Mr. Kristian motioned to
adjourn the meeting. Vice Chair Councilwoman Becker seconded. Mr. Russell was not present
for the motion, which passed unanimously, 17-0. The meeting was adjourned at 7:30 pm.
The full recording and a transcript of this meeting can be found on the Town’s website
at www.hiltonheadislandsc.gov
Page 4 of 38
Page 1 of 7
Thursday, May 7, 2026
TO: Land Management Ordinance Task Force
FROM: Trey Lowe, Interim Planning Director
CC: Marc Orlando, ICMA-CM, Town Manager
Ben Brown, Interim Deputy Town Manager
DATE: May 7, 2026
SUBJECT: Land Management Ordinance Amendment
BACKGROUND:
The Land Management Ordinance (LMO) Task Force held its first meeting on January 6,
2026, marking the beginning of a comprehensive review of the Town’s land management
policies and regulations. Since that time, the Task Force has convened multiple times to
evaluate and discuss a range of topics, including wetland protection, tree preservation
and mitigation, land use classifications, zoning map changes, neighborhood character
overlays, and residential zoning districts. Through deliberate discussion and member
input, the Task Force has provided direction on several key issues while continuing to
refine its positions on others.
As the Task Force has progressed through these discussions, it has become increasingly
evident that subdivision regulations are a critical component of the ordinance because
subdivision design directly influences development pattern, neighborhood compatibility,
environmental protection, and long-term infrastructure performance.
MAY 7, 2026 MEETING OVERVIEW:
The LMO Task Force will review the following potential amendments to the LMO at the
request of the Town Council, aiming to align with community priorities, environmental
resilience, and the long-term vision for Hilton Head Island:
RM-4 (Low to Moderate Density Residential) Zoning District:
At the April 13, 2026, meeting, discussion of the proposal to replace the Low to Moderate
Density Residential District (RM-4) sliding scale with a flat six (6) units per acre resulted
in an even vote with no direction provided to staff. At the time, the Task Force decided to
discuss this topic again at the May 7, 2026, meeting.
TOWN OF HILTON HEAD ISLAND
Land Management Ordinance
Task Force
Page 5 of 38
Page 2 of 7
Thursday, May 7, 2026
According to the LMO, Section 16-3-104.E.1, the purpose of the RM-4 zoning district is
to protect and preserve the character of neighborhoods at densities up to four dwelling
units per net acre. This district is used to encourage a variety of residential opportunities,
including multifamily residential units, single-family residences, and group living. The
district's regulations are intended to discourage development that would substantially
interfere with or be detrimental to the residential character.
Under current LMO provisions, density in the RM-4 zoning district is determined by a
sliding scale that allows for 4 to 8 dwelling units per acre, based on parcel size.
• For parcels under 3 acres, up to 4 dwelling units per acre are allowed.
• For parcels at least 3 acres, up to 6 dwelling units per acre are allowed.
• For parcels at least 5 acres, up to 8 dwelling units per acre are allowed.
The Gullah Geechee Historic Neighborhoods Community Development Corporation
memorandum, reviewed at the April 13, 2026, meeting, recommended that, if the sliding
scale is modified, consideration of a fixed-density approach (e.g., 6 dwelling units per
acre) be given.
RM-4 Zoning District Analysis:
• 2,551 properties.
• Approximately 1,588 acres.
• Approximately 7.28% of the Island’s total acreage.
o 2,462 parcels are less than 3 acres.
o 53 parcels are between 3 and 5 acres.
o 36 parcels are greater than 5 acres.
Staff Feedback:
• Based on community input at past planning meetings and due to public feedback
to various major subdivisions approved by town staff, staff supports further
evaluation of the sliding scale density approach, with the goal of achieving more
predictable development outcomes and a consistent land use pattern in the RM-4
zoning district.
• Staff also acknowledges that density rights is a complex and important issue,
particularly where changes may be perceived as increasing or decreasing
allowable units.
• Further, to address this and other development impacts, additional subdivision
regulation updates will be proposed for discussion during the meeting. These
provisions are intended to:
Page 6 of 38
Page 3 of 7
Thursday, May 7, 2026
o Improve neighborhood infill development patterns.
o Establish clear and consistent site design expectations.
o Provide staff and Planning Commission with development pattern and design
review authority during subdivision review and approval.
At this stage, staff seeks direction on whether:
• The existing sliding scale should remain.
• A fixed density of six (6) dwelling units per acre should replace the sliding scale.
Subdivision and Large-Tract Residential Development Regulations:
Staff is seeking input from the LMO Task Force concerning the Town’s subdivision and
residential development regulations to align them with community priorities,
environmental resilience objectives, and the long-term vision for future residential
development on Hilton Head Island.
Existing challenges with the current regulations include:
• Fragmented standards located across multiple sections of the LMO;
• Overlap between subdivision design, site design, and zoning requirements;
• Limited clarity regarding development pattern expectations and review criteria; and
• Difficulty for applicants, staff, and decision-makers to understand how subdivision
regulations influence density, layout, and neighborhood compatibility.
Major Subdivision Analysis:
• Since 2014:
o 19 major subdivisions have been submitted.
o 17 subdivisions have been finalized.
o 2 subdivisions are currently under construction.
o 14 of those were located in the RM-4 zoning district.
o 12 were located in Historic Neighborhoods.
• The Town currently includes approximately:
o 25,233 parcels Island-wide.
o 1,260 vacant parcels.
o 217 vacant parcels in RM-4.
Page 7 of 38
Page 4 of 7
Thursday, May 7, 2026
o 559 vacant parcels in Historic Neighborhoods.
These patterns indicate subdivision regulations remain especially relevant in areas where
future development form will continue to shape neighborhood character. Additionally,
recent subdivision outcomes have highlighted recurring concerns, including:
• Monotony in subdivision form and lotting patterns.
• Loss of mature tree canopy.
• Low-quality or fragmented open space.
• Premature mass clearing and grading.
• Design outcomes that do not reflect the spatial variation, environmental
preservation, and neighborhood qualities associated with Hilton Head Island.
These issues are particularly concerning when considering development pressures on
the Island. To address these challenges, staff supports amending and reorganizing the
subdivision and residential development regulations to:
• Improve clarity, usability, and internal consistency;
• Align subdivision standards with neighborhood character and zoning intent;
• Provide clearer guidance on site design, layout, and development patterns;
• Strengthen review authority for design and layout during subdivision approval;
• Integrate subdivision standards with stormwater, infrastructure, and buffering
requirements;
• Document, assess, and protect critical environmental resources and wildlife
habitat;
• Limit mass grading and clearing practices; and
• Mitigate the impacts associated with cumulative contiguous minor subdivisions.
As you recall, the previous best practices framework for subdivisions included the
following topic areas, all of which will be incorporated into a new chapter outline on this
matter.
• Environment Protection & Coastal Resilience;
• Transportation, Access, & Traffic Management;
• Pedestrian, Bicycle, & Multimodal Mobility;
• Neighborhood Design & Community Character;
• Parks, Recreation, & Usable Open Space;
Page 8 of 38
Page 5 of 7
Thursday, May 7, 2026
• Infrastructure, Utilities, & Resilience; and
• Review Process & Public Interest Protections.
The intent of our effort is to prepare a new chapter in the LMO that will serve as a
comprehensive checklist and guidebook for residential development design within the
Town of Hilton Head Island. This work will result in a centralized reference for residential
development requirements that consolidates applicable standards, organizes them in a
clear format, and provides a consistent framework for both subdivision and non-
subdivision residential development.
The chapter will also define applicability and thresholds for when the residential design
requirements and standards will be used. This includes distinguishing between
development types that may be more appropriately regulated under general site
development standards and those that should follow residential-specific provisions (e.g.,
an apartment complex vs. a single-family neighborhood).
For developments regulated by this chapter, our primary objective is to align requirements
so that different forms of residential development are subject to comparable standards,
where appropriate. The goal is that, regardless of whether a project is processed as a
subdivision, condominium development, or rental community, the resulting development
reflects a consistent level of quality. Where distinctions are necessary, the chapter will
clearly identify which standards apply based on development type.
The overall objective is to provide a clear and coordinated set of standards that support
consistent development outcomes and preserve the town’s natural and cultural
resources. Consideration will also be given to the cumulative effects of smaller,
incremental minor subdivision development to ensure that long-term impacts are
addressed through appropriate requirements for open space, pathways, and related
improvements.
As part of this process, existing ordinance provisions will be evaluated to determine
whether they should be relocated to this new chapter or remain in their current location
and referenced. This approach recognizes that some standards apply broadly across
multiple development types and should not be limited solely to residential applications.
The effort will also incorporate design considerations related to natural resources and site
functionality. This includes ensuring that development is responsive to existing habitat
and environmental features identified through initial pre-development assessments, as
well as addressing street and pathway design, circulation, and connectivity. In addition,
the chapter will review and organize standards related to common open space and the
design of active and passive recreational areas serving residential developments.
The following is a working outline showing the tentative structure of the proposed chapter.
Page 9 of 38
Page 6 of 7
Thursday, May 7, 2026
New Proposed Chapter: Subdivision and Large-Tract Residential Development
Regulations:
Section 101. General Provisions
A. Purpose and Intent
B. Applicability
C. Processes
Section 102. Residential Development Layout and Design
A. General Requirements
B. Lots and Blocks
C. Building Design and Placement
D. Subdivision Types
Section 103. Environmental Protection and Common Open Space
A. Wetland Protection
B. Beach and Dune Protection
C. Habitat and Natural Resource Assessment, Documentation, and Preservation
D. Tree Protection
E. Grading and Clearing
F. Buffers and Landscaping
G. Common Open Space Standards
Section 104. Mobility (Street, Pathway, and Sidewalk Standards)
A. Streets
B. Pathways and Sidewalks
C. Driveways
D. Parking
E. Transportation Analysis Standards
Section 105. Stormwater, Utilities, and Infrastructure
A. Stormwater
B. Utility Standards
C. Fire Code
D. Flood Zones
E. Miscellaneous (monuments, markers, addressing, lot numbers, etc.)
Page 10 of 38
Page 7 of 7
Thursday, May 7, 2026
REMAINING PRIORITY AMENDMENTS AND REVIEW PROCESS:
For the remaining amendments, Town staff will work collaboratively with the LMO Task
Force to:
1. Review each remaining priority amendment in detail;
2. Receive Task Force feedback and recommended refinements; and
3. Return consolidated draft revisions to the Task Force for verification prior to formal
recommendation.
The goal of the LMO Task Force is to reach consensus on proposed amendments, not
unanimous approval of each individual amendment.
Following Task Force consensus, recommendations will proceed through the required
public hearing and review process, including:
• Gullah Geechee Land & Cultural Preservation Task Force;
• Planning Commission;
• Community Development & Public Services Committee; and
• Town Council consideration via ordinance.
Completion of Task Force review and recommendations is currently targeted for May
2026, with discussion of Short-Term Rentals, subject to meeting schedule and Task Force
direction.
QUESTIONS PRIOR TO THE MEETING:
Should you have questions prior to the meeting, please contact Trey Lowe, Interim
Planning Director, at TreyL@hiltonheadislandsc.gov, and copy Chairman DeSimone at
SteveD@hiltonheadislandsc.gov and Town staff as appropriate. Trey Lowe can also be
reached at 843-341-4690.
Providing questions in advance assists staff in preparing any additional information
needed to support Task Force discussion and direction.
ATTACHMENTS:
1. Attachment 1 – Relevant LMO Sections
Page 11 of 38
Attachment 1: Relevant Code Sections
Page 1 of 27
Thursday, May 7, 2026
LMO Task Force - 05-7-26 Meeting
Attachment 1
Relevant Code Sections:
To assist with review this attachment contains relevant code sections in the following
order:
• Section 16-3-104.E. Low to Moderate Density Residential (RM-4) District
• Section 16-5-115. Subdivision Standards
• Section 16-5-104. Open Space Standards
• Section 16-5-105. Mobility, Street and Pathway Standards
Page 12 of 38
Attachment 1: Relevant Code Sections
Page 2 of 27
Thursday, May 7, 2026
Sec.16-3-104.E. Low to Moderate Density Residential (RM-4) District
RM-4
Low to Moderate Density Residential District
1. Purpose
The purpose of the Low to Moderate Density Residential (RM-4) District is to protect and preserve the
character of these areas and neighborhoods at densities up to four dwelling units per net acre. This district is
used to encourage a variety of residential opportunities, including multifamily residential units, single-family
residences, and group living. The regulations of the district are intended to discourage development that
would substantially interfere with, or be detrimental to, residential character.
2. Allowable Principal Uses
USE CLASSIFICATION/TYPE USE-SPECIFIC
CONDITIONS
MINIMUM NUMBER OF OFF-
STREET PARKING SPACES
Residential Uses
Family Compound PC Sec. 16-4-102.B.1.e 2 per du
Family Subdivision PC Sec. 16-4-102.B.1.f 2 per du
Group Living P 1 per 3 rooms
1 bedroom 1.4 per du
2 bedroom 1.7 per du
Multifamily P
3 or more
bedrooms
2 per du
Recreational Vehicle PC 16-4-102.B.1.c 1 per Recreational Vehicle
Single-Family P 2 per du + 1 per 1,250 GFA over
4,000 GFA
Workforce Housing PC Sec. 16-4-102.B.1.d See Sec. 16-5-107.D.2
Public, Civic, Institutional, and Educational Uses
Cemeteries P 1 per 225 GFA of office area + 1 per
500 GFA of maintenance facilities
Community Service Uses P 1 per 400 GFA
Colleges and High
Schools
10 per
classroom
Elementary and
Junior High/Middle
Schools
4 per
classroom
Education Uses P
Other Education
Uses
See Sec. 16-
5-107.D.2
Fire
Stations
4 per bay + 1 per 200
GFA of office area
Government Uses PC Sec. 16-4-102.B.2.d
Other 1 per 200 GFA of office
area
Major Utilities SE 1 per 1,500 GFA
Minor Utilities P n/a
Public Parks P See Sec. 16-5-107.D.2
Religious Institutions P 1 per 3 seats in main assembly
area
Telecommunication Antenna, Collocated
or Building Mounted
PC Sec. 16-4-102.B.2.e n/a
Telecommunication Towers, Monopole PC Sec. 16-4-102.B.2.e 1
Page 13 of 38
Attachment 1: Relevant Code Sections
Page 3 of 27
Thursday, May 7, 2026
Resort Accommodations
Bed and Breakfasts PC Sec. 16-4-102.B.4.a 1 per guest room
Commercial Services
Convenience Stores PC Sec. 16-4-102.B.7.d 1 per 200 GFA
Open Air Sales PC Sec. 16-4-102.B.7.i 1 per 200 GFA of sales/display
area
Other Commercial Services PC Sec. 16-4-102.B.7.l See Sec. 16-5-107.D.2
Other Uses
Stables or Riding
Academies
1 per 5
stalls
Agriculture Uses P
Other n/a
Boat Ramps, Docking Facilities, and
Marinas
PC Sec. 16-4-
102.B.10.a
1 per 200 GFA of enclosed floor
space not used for storage + 1 per
3 wet slips + 1 per 5 dry storage
slips
3. Development Form Standards
MAX. DENSITY (PERNET ACRE)2 LOT COVERAGE
Residential2 4 du (6 du if
lot area is at
least 3
acres; 8 du
if lot area is
at least 5
acres)
Max. Impervious Cover for All
Development
Except Single-Family1
35%
Bed and Breakfast 10 rooms
Nonresidential 6,000 GFA Min. Common Open Space for Major Residential
Subdivisions16%
MAX. BUILDING HEIGHT
All Development 35 ft
USE AND OTHER DEVELOPMENT STANDARDS
See Chapter 16-4: Use Standards, Chapter 16-5: Development and Design Standards, and Chapter 16-6:
Natural Resource Protection.
TABLE NOTES:
P = Permitted by Right; PC = Permitted Subject to Use-Specific Conditions; SE = Allowed as a Special
Exception; du = dwelling units; sf = square feet; GFA = gross floor area in square feet; ft = feet; n/a = not
applicable
1. Each adjacent parcel abutting the Town right-of-way acquired under the Town's Dirt Road Paving Program
shall be permitted to develop to its full density potential based on the size of the parcel prior to the
establishment of the Town right-of-way. See Section 16-5-105.D for additional details.
2. Density for development that includes the Workforce Housing shall be determined based on Sec. 16-4-
105.A.
(Revised 4-18-2017 - Ordinance 2017-05; revised 9-17-2019 - Ordinance 2019-20; revised 11-18-2020 - Ordinance
2020-27; revised 2-16-2021 - Ordinance 2021-02; revised 7-20-2021 - Ordinance 2021-15; revised 3-7-2023 -
Ordinance 2023-04; revised 8-19-2025 - Ordinance 2025-16)
Page 14 of 38
Attachment 1: Relevant Code Sections
Page 4 of 27
Thursday, May 7, 2026
Sec.16-5-115. Subdivision Standards
A. Purpose and Intent
The purpose of subdivision layout is to create a functional and
attractive development with infrastructure and lots appropriately sized and located to
minimize adverse impacts. The intent of this section is to provide clear requirements and
guidelines for subdivision design for both Major and Minor
Subdivisions. Subdivisions should promote the health, safety, convenience,
order, prosperity and welfare of the present and future residents of the Town by:
a. Providing for the orderly growth and development of the Town;
b. Coordinating with the existing street system, transportation plans, and public
facilities;
c. Providing right-of-way for street and vehicular easements;
d. Avoiding congestion and overcrowding and encouraging proper arrangement
of streets in relation to existing planned streets;
e. Preservation of the natural tree canopy and preservation of protected tree species;
f. Ensuring there is adequate common open space and recreation facilities; and
g. Ensuring there is proper recordation of land ownership.
(Ordinance 2025-13, § 1(Exh. A), 8-19-2025; revised 8-19-2025 - Ordinance 2025-16)
B. Applicability
Subdivisions shall comply with all applicable design and performance standards of this
section and this Ordinance, including the adjacent setback and buffer standards in Sec.
16-5-102 and 16-5-103.
C. General Requirements
1. Layout of the subdivision shall be based on
complete site analysis. Streets and lots shall be designed to preserve significant
trees, stands of trees and understory vegetation and situated to minimize alteration
of natural and historic site features to be preserved.
2. The subdivision layout shall consider the practicality and economic feasibility
of development of individual lots including the environmental characteristics, size of
the site, and the requirements of this Ordinance.
3. The applicant is required to demonstrate that they have made all reasonable efforts
to preserve unique and fragile elements on site, including but not limited to
wetlands, significant stands of trees and individual trees of significant size,
with development reserved for environmentally stable areas.
(Revised 1-7-2020 - Ordinance 2020-02; revised 3-7-2023 - Ordinance 2023-04)
Page 15 of 38
Attachment 1: Relevant Code Sections
Page 5 of 27
Thursday, May 7, 2026
4. Common open space and recreational areas shall be planned in accordance
with Sec. 16-5-104, Common Open Space Standards.
(Revised 8-19-2025 - Ordinance 2025-16)
5. Lots shall be situated so that stormwater may be easily directed away
from buildings in subsequent site-specific development. Lots shall be configured so
that buildings and general flood sensitive site facilities can be located out of
drainageways. Subdivisions shall be designed so as to comply with Sec. 16-5-109,
Stormwater Management and Erosion and Sedimentation Control Standards.
6. All lots shall have the access required by Sec. 16-5-105.I, Access to Streets.
(Revised 8-19-2025 - Ordinance 2025-16)
D. Layout of Lots and Blocks
1. Subdivisions may be laid out in conventional, cluster, zero lot line, or a combination
of block/ lot designs.
(Revised 7-21-2020 - Ordinance 2020-16)
2. The lot configuration and shape shall provide appropriate sites for buildings, and be
properly related to topography, natural elements, existing significant trees and
stands of trees, access, drainage and utilities, and conform to all requirements of
this Ordinance.
(Revised 1-7-2020 - Ordinance 2020-02)
3. The dimensions of corner lots shall permit the required minimum setbacks
from streets (see Sec. 16-5-102, Setback Standards) and required site triangles (see
Sec. 16-5-105.H.4, Sight Triangles).
4. The number of lots within a block shall be as appropriate for the location and the
type of development contemplated, as practical. Visual monotony created by
excessive blocks of lots which are not interrupted by intersections, common open
space, buffers, trees or features shall be avoided.
(Revised 1-7-2020 - Ordinance 2020-02; revised 8-19-2025 - Ordinance 2025-16)
5. Pathway Connectivity.
a. Pathways are required throughout subdivisions. The provisions of this
subsection shall not apply to Minor Subdivisions and Family Subdivisions.
b. Pathways shall provide direct connectivity between all lots and
the subdivision's community amenities, including usable common open
space, mailbox facilities, community buildings, and recreational areas. For the
purpose of this requirement, a residential lot located across a street from
a pathway within the same subdivision or adjacent to a common open
space having a pathway is considered to be served by and connected to
that pathway.
Page 16 of 38
Attachment 1: Relevant Code Sections
Page 6 of 27
Thursday, May 7, 2026
c. Pathways shall be designed to provide connectivity from within
the subdivision to:
i. An existing pathway system located along an abutting right-of-
way or easement, an existing pathway within an easement on the property,
or a pathway on abutting Town-owned property; and
ii. Any pathway system planned within an adopted Town pathway plan or the
Capital Improvement Program (CIP) located along an abutting right-of-
way or easement, an existing pathway easement on the property, or an
abutting Town-owned property.
d. If the land proposed for a subdivision serves as a priority connection between
existing pathways and is included in an adopted Town pathway plan,
the pathway system shall be designed to connect the existing pathways through
the subdivision or along abutting street right-of-way. This requirement shall not
be construed as requiring off-site improvements other than within an
abutting street right-of-way.
e. As an alternative to pathway construction, a sidewalk may be approved by
the Official if the proposed subdivision abuts a street with an
existing sidewalk network or if the character or design of the
proposed subdivision would clearly benefit from
incorporating sidewalks instead of pathways. The incorporation
of sidewalks shall meet all other requirements of this section.
The Official may determine that a sidewalk is preferable over a pathway if:
i. Spacing is not sufficient for a pathway based on existing natural features,
infrastructure, utilities, easements, or built features;
ii. It would connect seamlessly to existing infrastructure;
iii. It would be more consistent with the design characteristics of the
proposed subdivision and abutting development;
iv. The travel distance of the proposed route is significantly shorter than areas
typically suitable for pathways; or
v. It would encourage slower travel speeds in areas of higher congestion.
f. Pathways or sidewalks shall be designed and constructed in accordance
with the fifth edition of the AASHTO Guide for the Development of Bicycle
Facilities and meet the accessibility guidelines promulgated under the
Americans with Disabilities Act (ADA).
(Revised 8-19-2025 - Ordinance 2025-16)
E. Zero Lot Line Residential Subdivisions
1. Zero lot line residential subdivisions are permitted in the following zoning districts:
RM-4, RM-8, RM-12, SPC, MS, WMU, S, MF, MV, NC, LC and RD.
Page 17 of 38
Attachment 1: Relevant Code Sections
Page 7 of 27
Thursday, May 7, 2026
2. All lots created in a zero lot line residential subdivision shall be buildable lots
(the appropriate size to construct a home) and shall be a minimum of .05 acres in
size with a minimum lot width of 20 feet.
3. All lots in a zero lot line residential subdivision shall have a 50% maximum
impervious coverage.
4. All zero lot line residential subdivisions shall provide 16% minimum common open
space.
(Revised 8-19-2025 - Ordinance 2025-16)
5. No structure shall be located closer than ten feet from adjacent property lines, with
the exception of structures that have a wall that rests on a common property line.
6. Where a proposed zero lot line residential subdivision is adjacent to an existing
single family detached residential neighborhood or use, a setback of 20 feet
is required along the perimeter of the proposed subdivision.
7. Where a proposed zero lot line residential subdivision is adjacent to an existing
single family detached residential neighborhood or use, a Type A buffer, Option 1,
is required along the perimeter of the proposed subdivision.
8. A zero lot line residential subdivision is not permitted on existing lots of record that
were not previously platted as a zero lot line residential subdivision, unless the
entire previously platted subdivision is combined and re-platted to be a zero lot line
residential subdivision.
(Revised 7-21-2020 - Ordinance 2020-16)
F. Street Access
1. All Major Subdivisions shall have direct vehicular access to a public street that
meets the standards of Sec. 16-5-105.C, General Street Design Standards.
2. Minor Subdivisions shall be permitted to provide vehicular access to lots via a
minimum 20-foot wide unobstructed access easement, provided
the access easement complies with the following standards:
a. Access easements shall contain an all-weather driving surface approved by the
Fire Chief for the Town of Hilton Head Island.
b. Dead-end easements shall have a turn-around as required by the latest edition
of the International Fire Code as adopted by Town Council.
c. No access easement shall be permitted to exceed a maximum traffic volume of
50 ADT due to the further subdivision of lots without upgrading the accessway
to meet the design standards of Sec. 16-5-105.C, General Street Design
Standards.
Page 18 of 38
Attachment 1: Relevant Code Sections
Page 8 of 27
Thursday, May 7, 2026
d. Access easements are not allowed in any wetland buffer required by Sec. 16-6-
102.D, Wetland Buffer Standards, except for approximately
perpendicular crossings as approved by the Official.
e. A bridge may be permitted within an access easement as long as the driving
surface is at least 20 feet wide and is approved by the Fire Chief of the Town of
Hilton Head Island.
(Revised 7-21-2020 - Ordinance 2020-16)
G. Miscellaneous Standards
1. Monuments and Markers
a. Horizontal control monuments shall be placed in the pavement of subdivision
streets so that no lot is more than 2,000 feet from a control monument.
Alternatively, control monuments may be placed in common open space areas,
park areas, and the like. The control monument shall be placed in a manner
satisfactory to the Town Engineer.
(Revised 8-19-2025 - Ordinance 2025-16)
b. Corner monuments or markers shall be installed at all lot corners.
c. All corner monuments or markers shall consist of a concrete marker with metal
cap marking the exact corner and bearing the name of the surveying company
or the land surveyor in responsible charge of the survey. If the corner location
falls on pavement, concrete, or other material where it cannot be marked with a
cap, a shaft of ferrous metal (iron pipe or bar), spikes, or scribes may be
installed in or on the surface. These methods shall be used unless exceptional
circumstances warrant the use of other materials.
d. If a corner cannot be monumented or marked, one or more witness monuments
shall be placed on the boundary line and described by bearings or distances so
that the inaccessible point may be located accurately on the ground. A witness
monument shall adhere to the same standards applicable to a corner
monument.
2. Addressing and Lot Numbering
The Official shall determine a method
of street addressing/lot numbering. Applicants should consult with
the Town for site-specific review.
3. Lots with Septic Systems
Subdivisions creating lots to which public sanitary sewer is unavailable
shall demonstrate that all such lots are sized to accommodate septic systems. Such
systems shall be set back from property lines, approved by SCDHEC,
and located within septic easements recorded with the subdivision plat.
(Revised 7-20-2020 - Ordinance 2020-16)
Page 19 of 38
Attachment 1: Relevant Code Sections
Page 9 of 27
Thursday, May 7, 2026
Page 20 of 38
Attachment 1: Relevant Code Sections
Page 10 of 27
Thursday, May 7, 2026
Sec.16-5-104. Common Open Space Standards
A. Purpose and Intent
The purpose and intent of this section is to ensure a portion of residential development
sites is set aside as common open space for the use and enjoyment of the
development's occupants and users. Common open space serves numerous purposes,
including preservation and protection of natural areas and features, providing
opportunities for passive and active recreation, providing areas for people to meet and
congregate, and limiting impervious surfaces that adversely impact water quality and the
environment.
B. Applicability
1. The provisions of this section apply to any Major Subdivisions (six or more lots)
creating lots for residential development, unless expressly exempted in this section.
2. The provisions of this section also shall apply to any Minor Subdivision (five or fewer
lots) creating lots for residential development that is expanded onto adjacent
parcels so the total number of lots in the subdivision is greater than five.
3. The provisions of this section do not apply to Family Subdivisions.
(Revised 8-19-2025 - Ordinance 2025-16)
C. Common Open Space Requirement
1. At least 16 percent of the land within the subdivision shall consist of common open
space meeting the requirements of this section.
2. Common open space shall be depicted on any plat of the development submitted
for approval and labeled "common open space."
3. Common open space must be visually identifiable, distinguished by elements
including but not limited to signs, fencing, landscape buffers, trail systems, pools,
sport facilities, or grass lawns.
(Revised 8-19-2025 - Ordinance 2025-16)
D. Common Open Space Location and Configuration
1. Common open space shall be connected to all lots within the subdivision by
pathways in accordance with Sec. 16-5-115.D.5.
2. The common open space shall be accessible to all residents of the subdivision
development, subject to reasonable rules and regulations. Common open space
may be dedicated for general public use; however, such dedication is not
mandatory.
3. The design and establishment of common open space shall meet the following
standards:
Page 21 of 38
Attachment 1: Relevant Code Sections
Page 11 of 27
Thursday, May 7, 2026
a. An area or multiple areas of common open space shall be planned for active or
passive recreational use.
b. At least 75 percent of the common open space area shall be arranged in
dimensions no less than 15 feet across in any direction.
c. At least 50 percent of the common open space shall be arranged in one
contiguous area. For the purpose of this requirement, common open space
areas divided by pathways, sidewalks, or streets that would otherwise be
contiguous without the existence of the pathways, sidewalks, or streets shall be
considered contiguous.
d. The arrangement and design of common open space shall prioritize the
preservation of existing tracts of specimen and significant trees. The applicant
shall demonstrate how these priority areas have been considered during the
application process.
(Revised 8-19-2025 - Ordinance 2025-16)
E. Ownership, Management and Maintenance of Common Open Space
Common open space shall be maintained so that its use and enjoyment as common
open space is not diminished or destroyed. Ownership of common open space shall be
subject to deed restrictions or recorded covenants and restrictions that prevent
development or subsequent subdivision of the common open space and provide
responsibility for maintenance of the common open space.
(Revised 8-19-2025 - Ordinance 2025-16)
Page 22 of 38
Attachment 1: Relevant Code Sections
Page 12 of 27
Thursday, May 7, 2026
Sec.16-5-105. Mobility, Street, and Pathway Standards
A. Mobility
1. Purpose
The purpose of this section is to ensure that development accommodates the safe and
efficient movement of motor vehicles, emergency vehicles, bicyclists, and pedestrians within
the development and between the development and external transportation systems,
neighboring development, and local destination points such as places of employment,
schools, parks, and shopping areas. Such multimodal access and circulation is intended to
provide transportation options, increase the effectiveness of local service delivery, reduce
emergency response times, promote healthy walking and bicycling, contribute to the
attractiveness of the development and community, increase opportunities for interaction
between neighbors, reduce vehicle miles of travel and travel times, improve air quality,
minimize congestion and traffic conflicts, and preserve the safety and capacity of community
transportation systems.
2. Applicability
Except as otherwise provided in this section, the standards in this section shall apply to
all development.
3. Complete Street Design Principles Encouraged
While not required, the use of complete street design principles are encouraged in
all development.
4. Required Level of Vehicular Access and Circulation
To the maximum extent practicable, a development shall be served by an internal
vehicular access and circulation system (including driveways, alleys, fire lanes, and parking
lot drive aisles) that permits safe, convenient, efficient, and orderly movement of vehicles
between and among trip origin and destination points within the development, as well as
between the internal vehicular circulation system and adjoining parts of an existing or
planned external street system.
5. Accessway Layout and Design
a. Adaptation to Site Conditions
The layout of the access and circulation system shall adapt to the site, taking into
consideration physical factors such as natural elements, grade, and drainage, as well as
Page 23 of 38
Attachment 1: Relevant Code Sections
Page 13 of 27
Thursday, May 7, 2026
aesthetic factors such as the visual impact of the street pattern and the highlighting of special
site features.
b. Coordination of Vehicular, Bicycle, and Pedestrian Access and Circulation
The vehicular, bicycle, and pedestrian access and circulation systems in a development shall
be coordinated with each other within the development and with such
systems adjacent to the development to minimize conflicts.
c. Incentives for Vehicular Cross Access Between Adjoining Developments
For each adjoining property to which a development provides vehicular cross access, the
number of parking spaces required in accordance with Sec. 16-5-107.D, Parking Space
Requirements, may be reduced by five spaces. If the cross access is adjacent to a landscape
median at the end of a parking bay, the minimum width of the median as required by Sec. 16-
5-107.G.3, Configuration and Landscaping, may be reduced to 12 feet.
d. Traffic Control and Calming Measures
Traffic-calming measures—including, but not limited to, diverters, street gardens,
landscaped medians, and curvilinear alignments—shall be integrated into
a development's vehicular circulation system where necessary to mitigate the impact of
traffic. Installation of new speed bumps/humps or changes to existing speed bumps/humps
shall be prohibited unless approved by the Fire Marshal.
e. Driveway Layout and Design
i. Driveway Entrances
Driveway entrances from streets shall comply with standards in the current edition of
SCDOT's Access and Roadside Management Standards manual—including, but not limited
to, standards for driveway spacing, angle of intersection, entry width, radius, offset, approach
grade and side slope, throat length, and islands and medians. In instances where the Town's
access spacing standard as outlined in [Sec.] 16-5-105.I is greater than the SCDOT standard,
the Town's standard shall be applicable.
(Revised 5-17-2016 - Ordinance 2016-07)
ii. Driveway Width
01.All driveways shall comply with the following minimum and maximum width
requirements:
(A) One-way one-lane driveways shall be at least 14 feet wide and no more than 20 feet
wide, as measured between the edges of paving.
Page 24 of 38
Attachment 1: Relevant Code Sections
Page 14 of 27
Thursday, May 7, 2026
(B) Two-way, two-lane driveways shall be at least 20 feet wide and no more than 30 feet
wide, as measured between the edges of paving.
(C) Service driveways shall be a minimum of 10 feet wide and no more than 14 feet wide,
as measured between the edges of paving.
(Revised 12-5-2017 - Ordinance 2017-19)
02.The Official may require a wider driveway on determining that it is needed
to facilitate special vehicle or traffic demand requirements.
iii. Driveway Surfacing
Driveways shall be surfaced with asphalt, concrete, porous paving blocks, compacted shell,
gravel, or other material that the Official determines is unlikely to cause
substantial maintenance problems. Driveway aprons within a public street right-of-
way connecting to a paved street shall be paved with asphalt or concrete in accordance
with SCDOT specifications.
iv. Turnaround and Surfacing for Long Driveways
Driveways more than 150 feet long shall have a turnaround and all-weather surfacing
adequate for emergency vehicles approved by the Fire Chief for the Town of Hilton Head
Island.
f. Bikeway Layout and Design
i. If the location of a proposed development in relation to other potential areas or its
location with respect to an overall pathway plan adopted by the Planning Commission reveals
that the probable volume of bicycle use warrants the installation of bike paths or bike lanes,
the Official is authorized to require them.
ii. Bike paths and bike lanes shall be designed and provided in accordance with the latest
edition of the AASHTO Guide for the Development of Bicycle Facilities and S.C. Code Ann. §
56-5-3425.
(Revised 5-17-2016 - Ordinance 2016-07)
g. Walkway Layout and Design
Pedestrian walkways (including sidewalks) shall:
i. Be at least five feet wide;
Page 25 of 38
Attachment 1: Relevant Code Sections
Page 15 of 27
Thursday, May 7, 2026
ii. Be distinguishable from vehicular traffic lanes they cross by painted markings, a
change in pavement material or color, raised paving height, decorative bollards, or flashing
caution signals; and
iii. Meet the accessibility guidelines promulgated under the Americans with Disabilities
Act (ADA).
(Revised 5-17-2016 - Ordinance 2016-07)
B. Street Hierarchy
1. Streets shall be classified in a street hierarchy system, with through traffic separated
from residential access streets, and with design tailored to function.
2. The street hierarchy shall be defined by street function and average daily traffic (ADT).
Each street shall be classified and designed to meet or exceed the minimum standards for
one of the street types defined above.
3. The streets as identified in Table 16-5-105.B: Designated Arterials, are designated as
major and minor arterial streets, respectively:
TABLE 16-5-105.B: DESIGNATED ARTERIALS
Cross Island Parkway
Palmetto Bay Road
Pope Avenue
Major Arterials
U.S. Route 278 (William Hilton Parkway),
including Sea Pines Circle
Arrow Road
Beach City Road
Cordillo Parkway
Dillon Road
Folly Field Road
Minor Arterials
Gardner Drive
Page 26 of 38
Attachment 1: Relevant Code Sections
Page 16 of 27
Thursday, May 7, 2026
Greenwood Drive (to Sea Pines gate)
Gum Tree Road
Leg O'Mutton Road
Main Street
Marshland Road
Mathews Drive
New Orleans Road
North Forest Beach Drive (Coligny Circle to
Avocet Street)
Pembroke Drive
South Forest Beach Drive (Coligny Circle to
Alder Lane)
Spanish Wells Road
Squire Pope Road
Union Cemetery Road
Wild Horse Road
C. General Street Design Standards
All streets shall comply with the following standards, as applicable:
1. The arrangement of streets shall conform to that indicated by the Comprehensive
Plan or Official Map, as appropriate.
2. For streets not shown on the Comprehensive Plan or Official Map, the arrangement
of streets shall provide for the extension of existing streets where appropriate.
3. The street system shall be designed to permit the safe, efficient, and orderly
movement of traffic, and should generally follow the guidelines of the latest edition of
SCDOT's Highway Design Manual and AASHTO's A Policy on Geometric Design of Highways
and Streets.
Page 27 of 38
Attachment 1: Relevant Code Sections
Page 17 of 27
Thursday, May 7, 2026
4. The street system for residential subdivisions shall be designed to serve the needs of
the residential subdivision and to discourage use by through traffic.
5. Bicycle-safe drainage grates shall be used and perpendicular to the direction of travel
in the construction of all streets.
6. The Official may require marginal access, frontage streets, or other such treatment as
may be necessary for adequate protection of residential properties where a subdivision abuts
or contains an existing or proposed arterial, collector, or other major street. This requirement
shall not apply in a development (such as a PUD) where a central access street is provided.
7. The standards set forth above shall be met by all streets, whether publicly owned
or maintained or privately owned or maintained.
D. Exceptions for Streets in the Town's Dirt Road Paving Program
The Town has a program to accept donations of public road rights-of-way on qualifying private
unpaved roads with a goal to provide publicly maintained infrastructure within these rights-of-
way. The Town may approve different right-of-way design standards on these particular roads,
including streets, pathways, and storm drainage, to achieve this goal. If the donations of
public road rights-of-way meet the Town's acceptance criterion, a public Town right-of-way
will be recorded and the Town will maintain that right-of-way in perpetuity. The criterion are as
follows:
• The road must serve more than five dwelling units, each with an individual address point;
and
• Property owners must express interest in public road right-of-way assemblage (100%
willing participation); and
• Land for the public road right-of-way must be donated to the Town; and
• Condemn land only as necessary due to unclear title issues; and
• Community volunteers may assist staff with facilitating right-of-way donations.
In an effort to encourage the right-of-way donations, the Town will provide relief to certain
standards as described below:
1. Right-of-way width standards per Sec 16-5-105.D.1. shall apply, except the Town
Engineer may accept a minimum right-of-way width of 30' for two-way traffic and a minimum
right-of-way width of 24' for one-way traffic where physical and property
constraints preclude the standard widths from reasonably being met.
Page 28 of 38
Attachment 1: Relevant Code Sections
Page 18 of 27
Thursday, May 7, 2026
2. End Treatments shall be constructed in accordance with Sec 16-5-105.H, except
where the Town Engineer and Fire Marshal have deemed physical and property
constraints preclude this from reasonably being met.
3. Adjacent street setbacks shall be five feet along properties abutting the new Town
right-of-way.
4. Adjacent street buffers shall not apply to properties abutting the new Town right-of-
way.
5. Each adjacent parcel abutting the Town right-of-way acquired under this program shall
be permitted to develop to its full density potential based on the size of the parcel prior to the
establishment of the Town right-of-way.
(Revised 11-18-2020 - Ordinance 2020-27)
E. Design Standards by Street Type
1. Street Standards
All streets in the Town shall comply with the street standards established in Table 16-5-
105.E.1: Street Standards.
TABLE 16-5-105.E.1: STREET STANDARDS1
STREET TYPE
MAXIMUM AADT MINIMUM
PAVEMENT
WIDTH2
MINIMUM
SHOULDER
WIDTH3
MINIMUM RIGHT-
OF-WAY
Lane 50 20 ft 4 ft 30 ft
Cul-de-sac4 250
500
20 ft
20 ft
4 ft
8 ft
40 ft
50 ft
Local Access 2,000 22 ft 8 ft 50 ft
Subcollector 4,000 24 ft 8 ft 60 ft
Collector 6,000 24 ft 10 ft 70 ft
Minor Arterial 25,000 24 ft 10 ft 70 ft
Major Arterial 50,000 24 ft 12 ft 120 ft
Page 29 of 38
Attachment 1: Relevant Code Sections
Page 19 of 27
Thursday, May 7, 2026
1. Right-of-way width standards shall apply, except the Town Engineer may accept a
minimum right-of-way width of 30' right of way for two-way traffic and a minimum right-of-
way width of 24' for one-way traffic for streets acquired under the Town's Dirt Road Paving
Program where physical and property constraints preclude the standard widths from
reasonably being met.
2. One-way streets shall have a minimum clear pavement width of 14 feet.
3. Shoulders shall be stable areas adjoining both sides of the roadway that are capable of
supporting vehicles. They shall have a cross-slope no steeper than 12:1 (8.33%), and be
clear of obstructions. If the required shoulder width is not desirable or attainable, raised
curbing compliant with SCDOT standards may be substituted for the shoulder.
4. A hammerhead may be used in place of a cul-de-sac if the maximum AADT are 250 trips
or less.
2. Dead-End Streets
No dead-end streets shall be permitted except those classified as a lane or cul-de-sac above.
All dead end streets classified as cul-de-sacs require the geometric end treatment required in
Sec. 16-5-105.G, Cul-de-Sac, or Sec. 16-5-105.H, Hammerheads.
3. Estimate of Annual Average Daily Trips (AADT)
If it is not possible to determine the maximum ADTs to be served by a street at the time
of street design due to uncertainty about the type or intensity of use to be served, then
the applicant shall estimate the probable uses and intensities and probable ADTs. If
the Official determines that such estimates are unrealistic, the Official shall state why and
require more realistic estimates.
(Revised 11-18-2020 - Ordinance 2020-27)
F. Right-of-Way
Right-of-way shall be measured from property line to property line and shall be sufficiently
wide to contain the encompassing street elements of street pavement, shoulders, curbing,
sidewalks and median (if provided). In addition to a street, It may contain, but is not limited to,
utilities (including drainage), signs as allowed by Sec. 16-5-114, Sign Standards, landscaping,
and where applicable, pathways. The street elements required vary depending on intensity
of development and street order. Minimum rights-of-way shall be provided in Sec. 16-5-
105.E.1, Street Standards.
Page 30 of 38
Attachment 1: Relevant Code Sections
Page 20 of 27
Thursday, May 7, 2026
(Revised 11-18-2020 - Ordinance 2020-27)
G. Cul-de-Sac
To be classified as a cul-de-sac, a street must terminate at one end with the hammerhead
or cul-de-sac geometric end treatment described in 16-5-105.G and 16-5-105.H,
respectively.
1. A residential cul-de-sac shall have a minimum right-of-way radius of 65 feet and a
minimum outside edge-of-pavement radius of 55 feet.
2. A nonresidential cul-de-sac shall have a minimum right-of-way radius of 75 feet and a
minimum outside edge-of-pavement radius of 65 feet.
3. A cul-de-sac shall have a minimum width of 20 feet of unobstructed pavement.
4. A residential cul-de-sac shall have a maximum length of 1,000 feet.
Figure 16-5-105.G: Cul-de-Sac Design
(Revised 11-18-2020 - Ordinance 2020-27)
H. Hammerheads
1. Hammerheads shall have a minimum length of 60 feet and a maximum length of 120
feet.
2. A hammerhead shall have a minimum width of 20 feet of unobstructed pavement.
Figure 16-5-105.H: Hammerhead Design
(Revised 11-18-2020 - Ordinance 2020-27)
I. Street Intersections
1. Minimum Intersection Angle
Street intersections shall be as nearly at right angles as practical and in no case shall be less
than 75 degrees, with the angle measured at a distance of 100 feet from the centerline of the
existing roadway (measured from a point of tangency if in a curve) to the centerline of the
new roadway.
Page 31 of 38
Attachment 1: Relevant Code Sections
Page 21 of 27
Thursday, May 7, 2026
2. Minimum Centerline Offset of Adjacent Intersections
New intersections along one side of an existing street shall coincide with and, if practical, be
directly opposite any existing intersections on the opposite side of the street. For all streets,
the use of "T" intersections in subdivisions is encouraged. To avoid corner-cutting when
inadequate offsets exist between adjacent intersections, offsets shall be at least 125 feet
between centerlines of intersecting streets.
3. Grade
Intersections shall be designed with a relatively flat grade wherever practical. Maximum grade
within intersections shall be five percent except within collectors and lower order streets,
where the maximum grade shall be three percent.
4. Sight Triangles
a. Sight triangles shall be required and shall include the area on each street corner that is
bounded by the line that connects the "connecting" points located on each of the right-of-
way lines of the intersecting street (see Figure 16-5-105.H.1: Sight Triangle Visual
Clearance).
b. No structure or plantings (at mature growth) exceeding 30 inches in height above
the street grade shall be permitted within the sight triangle. Exceptions
are permitted for trees if the lower canopy of the trees allows a clear line of sight between
three feet and seven feet above the street grade and the trunks of such trees are sufficiently
spaced or are so located as to be unlikely to substantially interrupt the line of sight.
Figure 16-5-105.I.1: Sight Triangle Visual Clearance
c. Obstruction of a sight triangle is considered a violation of this Ordinance. Clearance of
an obstruction shall be enforced in accordance with Chapter 16-8: Enforcement.
d. Sight triangles shall have the dimensions shown in Table 16-5-105.I.4, Sight Triangle
Dimensions.
TABLE 16-5-105.I.4: SIGHT TRIANGLE DIMENSIONS (FEET)1
CLASSIFICATION
OF
CLASSIFICATION OF STREET "B"
Page 32 of 38
Attachment 1: Relevant Code Sections
Page 22 of 27
Thursday, May 7, 2026
STREET "A"
LANE, CUL-DE-
SAC, LOCAL
ACCESS
SUBCOLLECTOR COLLECTOR MINOR
ARTERIAL
MAJOR
ARTERIAL
Lane, Cul-de-Sac,
Local Access
25/25 25/35 30/40 30/45 35/50
Subcollector 35/25 35/35 40/40 40/45 45/50
Collector 40/30 40/40 40/40 45/45 50/50
Minor Arterial 45/30 45/40 45/45 45/45 50/50
Major Arterial 50/35 50/45 50/50 50/50 50/50
1. The first number in each pair is the length of the sight triangle's leg along the right-of-
way of street "A"; the second is the length of the leg along the right-of-way of street "B" (see
Figure 16-5-105.I.2: Sight Triangle Dimensions).
Figure 16-5-105.I.2: Sight Triangle Dimensions.
5. Curbing
Curbing shall be required at the radials of intersections involving
two streets of subcollector or higher order.
6. Deceleration Lane and Right Turn Lane
Whenever an arterial or collector street intersects an arterial, the street having the right-of-
way shall have a full-width deceleration lane at least 150 feet long, and the
yielding street shall have a full-width right-turn lane designed to allow stacking distance at
least 100 feet in length. In addition, any driveway access on the street without the
deceleration lane shall be a minimum of 150 feet from the intersection. In any case, where
neither street is obviously dominant (due to equal order hierarchy, signalization or other
similar factor), then both streets shall provide full-width deceleration or right-turn lanes,
as appropriate, at least 150 feet long.
Figure 16-5-105.I.6: Deceleration Lanes
Page 33 of 38
Attachment 1: Relevant Code Sections
Page 23 of 27
Thursday, May 7, 2026
7. Stacking Depth
Development on major arterials shall provide a drive aisle not less than 100 feet long from the
arterial, measured from edge-of-pavement to edge-of-pavement (including deceleration
lanes), so as to provide adequate stacking room for vehicles entering the development.
Such drive aisles shall be free of any elements that may impede vehicle travel.
(Revised 11-18-2020 - Ordinance 2020-27)
J. Access to Streets
1. Major Arterials
Along the same side of major arterials, no street, driveway, or other vehicular access point
shall enter at a point nearer than 500 feet from the centerline of an existing or final
approved street, driveway, or other vehicular access point to the centerline of the proposed
vehicular access unless the lot would be rendered unusable by the strict application of this
standard, in which case the access point should be optimally located.
(Revised 3-7-2023 - Ordinance 2023-04)
2. Minor Arterials
Along the same side of minor arterials no street, driveway, or other vehicular access point
shall enter at a point nearer than 200 feet from the centerline of an existing or final
approved street, driveway, or other vehicular access point to the centerline of the proposed
vehicular access unless the lot would be rendered unusable by the strict application of this
standard, in which case the access point should be optimally located.
(Revised 3-7-2023 - Ordinance 2023-04)
3. All Other Streets
Along the same side of all other streets, no street, driveway, or other vehicular access point
shall enter at a point nearer than 100 feet from the centerline of an existing or final
approved street, driveway, or other vehicular access point to the centerline of the proposed
vehicular access unless the lot would be rendered unusable by the strict application of this
standard, in which case the access point should be optimally located—provided, however,
that this minimum separation standards shall not apply to vehicular access points serving
single-family dwellings in subdivisions.
(Revised 3-7-2023 - Ordinance 2023-04)
4. One-Way Access Points
Page 34 of 38
Attachment 1: Relevant Code Sections
Page 24 of 27
Thursday, May 7, 2026
When evaluating the required minimum distance separation between vehicular access points
along the same side of a street, a pair of one-way vehicular access points may be considered
a single vehicular access point centered midway between the pair. The centerline-to-
centerline spacing between any ingress/egress pair must be a minimum of 100 feet, unless
the one-way pair is divided by a median that is 20 feet wide or less. A one-way
vehicular access point shall have a width of not less than 14 feet or more than 20 feet. These
vehicular access points shall attain at least one-half of the minimum distance separation
from adjacent vehicular access points that would otherwise be required.
Figure 16-5-105.J.4: Separation Requirements for One-
Way Access Points
5. Median Cuts
New median cuts on major arterials shall be at least 1,000 feet from existing or approved
median cuts and shall have left-turn deceleration lanes in each direction at the median cut.
6. Frontage Required
All new multifamily and nonresidential development shall have frontage on, and direct
vehicular access onto, a street meeting the standards in Section Sec. 16-5-105.E.1, Street
Standards. This vehicular access requirement shall not apply to the redevelopment of an
existing development site with vehicular access only on a street not meeting the standards in
Sec. 16-5-105.E.1, Street Standards.
7. Gates
a. The installation of gates across fire apparatus access streets shall ensure adequate
emergency vehicle access. Gates shall have an approved means of emergency operation and
the emergency operation shall be maintained as operational at all times.
b. Gates shall have an unobstructed opening of not less than 14 feet in width for one-way
traffic and 20 feet in width for two-way traffic.
c. Gates shall be located at least 100 feet from any arterial or collector street,
and shall comply with the stacking distance standards in Table 16-5-107.I.1, Vehicle Stacking
Distance for Drive-Through and Related Uses.
(Revised 8-18-2020 - Ordinance 2020-19)
Page 35 of 38
Attachment 1: Relevant Code Sections
Page 25 of 27
Thursday, May 7, 2026
8. [Reserved]
(Revised 11-18-2020 - Ordinance 2020-27; revised 3-7-2023 - Ordinance 2023-04)
K. Private Streets
The developer shall record restrictive covenants defining operation
and maintenance responsibilities for private streets with the Beaufort County Register of
Deeds.
(Revised 11-18-2020 - Ordinance 2020-27)
L. Street Lighting
Street lighting, if provided, shall comply with the standards recommended in the latest edition
of the IES Lighting Handbook published by the Illuminating Society of North America, or other
comparable standards approved by the Official. All such lighting shall be hooded or directed,
to the extent practical, to shield the light source from direct view from adjacent properties
and streets.
(Revised 11-18-2020 - Ordinance 2020-27)
M. Traffic Signs and Street Name Signs
1. Traffic Signs
Traffic signs shall be provided at the developer's expense, and their design and placement
shall be in accordance with the latest edition of the Manual on Uniform Traffic Control
Devices.
2. Street Name Signs
a. Street name signs (on private internal streets) shall be provided at
the developer's expense.
b. Two street name signs shall be provided in instances where there are differently
named streets on either side of the intersection.
c. Signs shall be reflective or installed under light standards and should be consistent, of
a style appropriate to the Town, of a uniform size and color, and erected on street posts of the
same height set in concrete as established by the Town Engineer.
d. The Official may allow deviations from these standards in consideration
of neighborhood character or special signage.
(Revised 11-18-2020 - Ordinance 2020-27)
Page 36 of 38
Attachment 1: Relevant Code Sections
Page 26 of 27
Thursday, May 7, 2026
N. Street Furniture
Street furniture, which consists of the man-made elements of a streetscape generally
associated with amenities for pedestrians, shall be placed where needed and not interfere
with safe use of the pathway or roadway.
(Revised 11-18-2020 - Ordinance 2020-27)
O. Street Design and Construction Standards
Subject to the Town Engineer's approval, the following standards shall apply:
1. Shoulders, Side Slopes and Ditches
a. All streets offered for public dedication shall have shoulders or curbs, side slopes and
ditches, or alternative storm drainage systems prepared in accordance with the latest
editions of the SCDOT's Standard Specifications for Highway Construction and Access and
Roadside Management Standards.
b. Shoulders shall be properly compacted and stabilized to a safe edge. Stabilized turf
shoulders are not required but are recommended. If curbs are used, shoulders may not
be required.
2. Paving Streets for Public Dedication
All streets offered for public dedication shall be constructed and surfaced with finished
paving in accordance with the latest editions of the SCDOT's Standard Specifications for
Highway Construction and Access and Roadside Management Standards.
3. Paving Private Streets
Private streets may be constructed without finished paving, provided that the finished surface
and drainage system are approved by the Town Engineer.
4. Bicycle Lanes
Bike lanes shall be designed and provided in accordance with the latest edition of the
AASHTO Guide for the Development of Bicycle Facilities and S.C. Code Ann. § 56-5-3425.
(Revised 11-18-2020 - Ordinance 2020-27)
P. Multi-Purpose Pathways
Multi-purpose pathways to accommodate both pedestrian and bicycle traffic may be
provided independent of the street system. The pathway standards in this section apply only
Page 37 of 38
Attachment 1: Relevant Code Sections
Page 27 of 27
Thursday, May 7, 2026
to pathways constructed generally parallel to streets within a private or public right-of-way.
The following standards shall apply to multi-purpose pathways:
(Revised 5-17-2016 - Ordinance 2016-07)
1. Pathways shall be designed and provided in accordance with the latest edition of
AASHTO's Guide for the Development or Bicycle Facilities. Dimensions
and construction specifications of multi-purpose paths shall be determined by the number
and type of users and the location and purpose of the path.
Figure 16-5-105.P.1: Pathway Dimensions
2. A minimum eight-foot paved width shall be provided for two-way traffic and a five-foot
width for one-way traffic. A five-foot sidewalk on each side of the roadway is an acceptable
alternative to providing a single separated two-way pathway facility.
(Revised 5-17-2016 - Ordinance 2016-07)
3. Choice of surface materials, including bituminous mixes, concrete, gravel, soil
cement, stabilized earth, and wood planking, shall depend on use and users of the path, as
approved by the Town Engineer.
4. Gradients of bike paths should generally not exceed a grade of five percent, except for
short distances. In no case, shall the gradient exceed a grade of eight percent.
5. Any multi-purpose pathway shall be restricted as part of the site's common open
space when within a major subdivision. A permanent easement for the pathway shall be
dedicated or reserved and shall provide for access to the pathway to allow for
its maintenance.
6. Bicycle-safe drainage grates shall be used and properly oriented with their openings
aligned perpendicular to the pathway in the construction of all multi-purpose pathways.
(Revised 11-3-2015 - Ordinance 2015-23; revised 11-18-2020 - Ordinance 2020-27))
Page 38 of 38
Source: Town of Hilton Head Island website. First collected Oct 13, 2026.