RecordWell Data

December 14 UDO Committee Meeting and supporting documents

Town of Chapin · Lexington County · meeting of Dec 14, 2023 · Agendas

Open the original document More from Town of Chapin

Text

Extracted automatically from the original. Tables and formatting may not survive; the original document is authoritative.

CHAPIN UNIFIED ZONING & DEVELOPMENT ORDINANCE STEERING COMMITTEE MEETING Council Chambers, Chapin Town Hall December 14, 2023 3:00 P.M. AGENDA Call to order Freedom of Information Act Compliance Approval of Minutes 1. December 5, 2023 Meeting Minutes Discussion Items 2. Unified Zoning and Development Ordinance: Article 6 draft review Action Items 3. Unified Zoning and Development Ordinance Recommendation to Planning Commission Adjourn TOWN OF CHAPIN UNIFIED DEVELOPMENT ORDINANCE COMMITTEE MEETING MINUTES Tuesday December 5, 2023 Town Hall 3:00 P.M. Members Present: Planning Commission Members Rae Davis, Caleb Pozsik, Clay Cannon, Josh Edwards, Erin Wessinger Staff Present: Town Clerk Shannon Bowers, Town Administrator Nicholle Burroughs Staff Absent: Mayor Al Koon Call to Order: Chair Davis called the meeting to order at 3:07 p.m. She then determined there was a quorum and acknowledged the appropriate notifications in compliance with the SC Freedom of Information Act had been met. Chair Davis welcomed new member Erin Wessinger and the committee held brief introductions to get the meeting started. The committee reviewed the November 7, 2023 meeting minutes and Member Cannon moved to approve the meeting minutes as presented. Member Edwards seconded the motion. No further discussion, motion passed unanimously. Chair Rae Davis: Yes Member Clay Cannon: Yes Vice Chair Caleb Pozsik: Yes Member Josh Edwards: Yes Member Erin Wessinger: Yes Discussion Items UDO Draft Discussion: Mr. Gianni began the discussion by highlighting changes from previous meeting discussions, which included the process for variances (requiring administrator recommendation for variance requests), zoning map changes (making the Town Center smaller), open space and amenities (putting it in a table for, and signs. The committee further discussed article 9 and the sign standards. Mr. Gianni noted that two new sections were included addressing internal and external illumination requirements. The committee expressed their desire to clarify that cabinet lettering or internally illuminated would be prohibited except in the interstate commercial area, but wanted to add language for materials that did not conflict with article 6: Overlay Design Standards. Suggested materials were metal and composite materials. Mr. Gianni noted that the Architectural Review Board would be reviewing sign materials as a part of the article 6 discussion. The committee then discussed scenarios likely to come under review under this draft document to determine any major concerns or edits needed. Items discussed during this exercise were related to the location and size of multifamily options, calculation of usable land (to reflect net area to be developed), buffer requirements, and clarifying language in the violations and enforcements article. The next UDO committee meeting will be on December 12. Adjournment: Vice Chair Pozsik moved to adjourn the meeting. Member Cannon seconded the motion. Meeting was adjourned at 5:10 p.m. UDO COMMITTEE APPROVED (Date): Rae Davis, PC Chair ATTEST: Unified Development Ordinance Committee October 9, 2023 Shannon Bowers, Town Clerk Article 6 Overlay District Design Standards – Draft_v2 – 12.12.23 1 Overlay District Design Standards 6.0 Article 6: Overlay District Design Standards 6.1 Purpose The standards for the architectural review overlay districts are based on the vision statement and land use element of the comprehensive plan. The intent of these standards is to develop design criteria that, produce aesthetically desirable buildings, produce buildings that provide a sense of character and identity, promote the pedestrian orientation of downtown, promote the preexisting look and character of areas throughout the Town, encourage individuality, harmony, and character in the design of new developments, redevelopments, and adaptive reuse of existing buildings. This section has the following objectives: 6.1.1 Compliance with the goals and objectives of the adopted plans of the Town 6.1.2 Promote and enhance Chapin’s architectural character 6.1.3 Support the public realm with high quality development. Visual diversity should be greatest along the street frontage. 6.1.4 Buildings should incorporate architecture and scale that is appropriate to its context and location 6.1.5 Encourage architecture that blends in with natural surroundings and neighboring development 6.1.6 Safeguard property values and build buildings for the long-term that can evolve and adapt over time. 6.1.7 Ensure that structures and accompanying landscaping, signage, and site lighting elements conforms and complements the architectural style of the site and area. 6.2 Design Overlays Definitions 6.2.1 Residential Design Overlay: To preserve historically significant buildings and neighborhoods in the Town, by requiring new construction to use traditional building materials and building forms. The inclusion of building forms and features adds variety and interest to the physical landscape, while also stimulating civic pride by fostering social interaction. Article 6 Overlay District Design Standards – Draft_v2 – 12.12.23 2 6.2.2 Downtown Overlay: A pedestrian scaled environment that includes a mix of uses and buildings that are built to directly front the sidewalk and street. The combination of buildings, civic spaces, and well-designed streets should stimulate vibrant economic activity and encourage congregation. The creation of new buildings, redevelopment of nonconforming uses, and complete streets serve as an opportunity for expanding the downtown and reinforcing key principles. 6.2.3 Corridor Overlay: To improve the aesthetic quality of corridors and create local nodes to serve the residents of the greater Chapin community. The preservation of landscaping, in addition to new vegetation, to soften the effect of large buildings and parking areas to great a quality impression on residents and visitors. 6.2.4 Interstate Overlay: A district specifically focused on development along interstate highways, to stimulate economic development while also creating an inviting environment as it is the primary gateway into the community. The design requirements in this area aims to retain unique characteristics of Chapin, while creating an environment that differs from traditional development. 6.2.5 Craftsman Design Overlay: American Craftsman style is a domestic architectural style that emerged in the late 19th and early 20th centuries. It is characterized by its Article 6 Overlay District Design Standards – Draft_v2 – 12.12.23 3 simplicity, functionality, and handcrafted elements. Craftsman homes typically have low-pitched gabled roofs with overhanging eaves, exposed rafters, and wide front porches supported by tapered columns. This style of architecture is already present in Chapin, especially along Lexington Avenue and Old Lexington Highway, and should be retained as it is an example of the unique character and charm of the Town of Chapin. 6.3 Terminology 6.3.1 Shall: This section establishes both binding standards and discretionary guidelines. Binding standards are typically signified the word “shall.” They are specific and precise standards that are required to be met in the submitted design. 6.3.2 Should, Encouraged, and Discouraged: Discretionary guidelines are typically signified by the words “should,” “encouraged, “and “discouraged.” They are general design objectives that are applied and interpreted by the appropriate review body in the review of development applications. “Should” is the goal, but the review body has flexibility as to how they are administered. 6.3.3 May: Discretionary guidelines with a greater degree of flexibility are signified by the word “may.” They are ideal guidelines and a project following these guidelines would result in an outcome that is very compliant with the City’s goals and objectives; however, they are not specifically required to be met. 6.4 Applicability 6.4.1 All new construction, redevelopment, modification, significant repair, or alterations within Town’s jurisdiction shall adhere the provisions of this article, unless otherwise specifically exempted within this article. 6.5 Boundaries and Map 6.5.1 The standards in this Article are applicable all properties located within an Architectural Review Overlay District. Every property within the Town is within one of the three overlay districts established by this ordinance. For the purposes of this section, the front of lots shall be defined as frontage along a public right-of-way or sidewalk. [Map is on next page] Article 6 Overlay District Design Standards – Draft_v2 – 12.12.23 4 Article 6 Overlay District Design Standards – Draft_v2 – 12.12.23 5 6.6 Conflicts With Other Sections 6.6.1 Relationship Between Overlays a. Residential buildings within a specific overlay: When an applicable residential building is constructed, it is governed by the provisions within the residential overlay. However, the ARB shall consider the context in which the residential building is constructed an may require it to feature some elements that are predominant in the parent overlay, such as the downtown, corridor, interstate, or craftsman overlay. As an example, if a residential building is built within the craftsman overlay, the review authority may require compliance with the craftsman district regulations if it is found that the residential design overlay requirement conflict with the provisions of the parent overlay. 6.6.2 Relationship to Land Use Provisions a. Applicability: Article 4 identifies use allowances by district and establishes additional standards applicable to specific uses. These provisions shall also apply in conjunction with the standards outlined in this article. b. Conflicts: In the event of a conflict between the requirements of this article and the requirements of Article 3, the most stringent requirement, as determined by the review entity, shall apply 6.6.3 Relationship to Historic District Standards a. Historic Buildings: To aid the ARB in cases where a building that has a historic designation by the National Park Service or South Carolina Department of Archives (SCDAH), the best practices from “The Secretary of the Interior's Standards for Rehabilitation and Guidelines for Rehabilitating Historic Buildings.” 6.7 Infill Compatibility 6.7.1 Setback Rhythm : Established building setback patterns should be continued as practical. Interruptions to street frontage character should be avoided by preserving existing front yard landscaping and street trees. 6.7.2 Massing: New construction should complement the massing of neighboring buildings by utilizing roof forms, architectural trim, differentiation of facade planes, and a relationship of solids (siding and walls) to voids (window and door openings) that are consistent with the patterns established in neighboring buildings 6.7.3 Articulation: When large scale construction is proposed that is not consistent with the predominant building height and lot width of the surrounding area, special attention shall be paid to specific building design elements in order to articulate a building form that is appropriate to the neighborhood context. These include the items listed in the paragraph above, along with siting, setbacks, and facade treatments. 6.8 Modification of Guidelines Article 6 Overlay District Design Standards – Draft_v2 – 12.12.23 6 6.8.1 Applicants may request modifications to the minimum design guidelines herein to permit design solutions that are otherwise compatible with surrounding development and the intent of this ordinance, but which, because of unique design considerations, are not able to achieve strict compliance with the guidelines of this chapter. Such applications shall be subject to the Major Architectural Review process detailed in Article 10. This option shall not be used to grant a variance or waiver of any requirement in any other article of this ordinance. 6.9 General Standards 6.9.1 Applicability: These standards shall apply to all buildings and properties located within the Residential, Downtown, Corridor, Interstate, and Craftsman overlay districts. Each development shall utilize one of the defined entrance types as defined in Section 6.9.2 for all pedestrian and public entrances, including primary and secondary entrances. Utility, employee, service, fire exits, and other ancillary or entrances not meant to be used by the general public, may be exempted by these requirements from the design review body. 6.9.2 Entrance Types: The following entrance types are hereby defined in the Town of Chapin: a. Entrance Types 1. Applicable to all entrance types: No entrance types shall encroach into the public right-of-way or utility easement, unless authorized approval from the entity having authority is provided to the Administrator. 2. Corner Lot Entrances: The primary entrance(s) should face the street from which the building derives its street address. 3. Secondary Entrances: Secondary access may be provided from parking areas located to the rear or side of a building. Large single tenant buildings or building with only common lobby access to building tenants that have more than 200 feet fronting a secondary street should provide an additional common entrance along that frontage as well. 4. Porches and Stoops: Porches shall be covered. May encroach into the front or side setback, but should not extend into the public right-of-way. a. Porch Height above grade: Porches and stoops shall be elevated 18 inches above grade when a sidewalk is present, and 24 inches when no sidewalk is present. b. Porch Depth and Length: Porches shall have a minimum depth of 6’ and shall span at least 25% of the façade in which it is located. c. Porch Screening: Porch screening is allowed, however architectural elements such as columns, railings, or posts shall be on the exterior of a screen. d. Stoop Entrance: The entrance to stoops is usually an exterior stair and landing with a covering or recessed entry. Stoops are not required to have coverings when used with detached single-family residences, but coverings are encouraged. The entryway and stairway shall be sized appropriately for the façade in which it is located. Article 6 Overlay District Design Standards – Draft_v2 – 12.12.23 7 5. Forecourts: Forecourts may be used in residential buildings to provide entry yards and/or shared garden space. Forecourts may be used in multi-family, commercial and mixed-use buildings to provide areas for outdoor dining, entries to individual tenants, or vehicular drop-off areas. Where provided, forecourts should be encouraged to be a minimum of 12 feet in depth and 12 feet in width, in order to provide an area for seating, trees, benches, or other features. 6. Colonnades/Arcades: Usually for buildings where the building line is aligned close to the frontage line, with a cantilevered roof overlapping a wide sidewalk. If applicable, the columns on the gallery should be evenly spaced with façade openings and minimum of 10’ wide. 7. Balconies: Balconies may encroach over the public sidewalk, but must project a minimum of 3 feet from the building façade. 8. Additional Entrance Type: An entrance type not defined by this code (such as a zero-step entry for seniors) may be proposed to the ARB for consideration, as part of a Major Architectural Review Application. 6.10 Residential Design Standards 6.10.1 Applicability The residential design standards shall apply to all residential properties located within the Town’s jurisdiction. Specifically, these standards shall apply to the following: a. All new construction of residential and accessory uses, as defined in Article 4 and unless specifically exempted by this article; b. The design of residential uses involved in a Major Subdivision application shall be approved by the Architectural Review Board as part of a separate Major Architectural Review application 6.10.2 Exceptions a. Construction Activities 1. Modifications a. Modification to existing structures, unless they require design review as specified in the Minor or Major Architectural Review procedures (Article 10). b. New Construction 1. Construction within the Rural Agricultural (RA), Rural Residential (RR), and Light Industrial (LI) zoning district, unless a particular use or structure is specifically called out in this article. 2. Interior remodeling work, which does not involve the alteration of any building component that does not alter any exterior building component. c. Nonconforming Structures Article 6 Overlay District Design Standards – Draft_v2 – 12.12.23 8 1. If the application meets the criteria of a Major or Minor Architectural Review, full compliance with the article is required. 2. Significantly Modified: Article 11 thresholds. 6.10.3 Preservation of Neighborhood Character A primary goal of these guidelines is to enhance the existing fabric of neighborhoods, while preventing or minimizing potential effects. New construction, renovations, or additions should align with the architectural style, scale, and overall aesthetic of the surrounding context, as to continuing foster a sense of community and belonging for residents. 6.10.4 Applicable to all Residential Building Types With the exception of RR and RA zoning districts and in addition to the applicable permitted use and accessory use conditions in Article 4, the following residential dwelling types have the following requirements: a. Entrance Type: All residences shall utilize at least one entrance type per Section 6.9.2. b. Façade details: A building, or each building if on a multi-building site, shall contain at least three of the following features: 1. Decorative porch/railing design. 2. Pillars, posts, or pilasters. 3. One or more bay windows with a minimum of 12” projection from façade. 4. Decorative molding or framing around windows and doors. 5. Roofline elements such as brackets/dormers/chimneys. 6. Developments with three or more principal buildings shall provide variation in building size, shape, height, color, and roofline in a manner that allows different buildings to be distinguished from one another. 7. Other façade element that provides architectural interest as determined by the review body. c. Exterior Façade Materials: Unless otherwise stated in this ordinance, building walls should be finished in one or more, but not more than four of the following materials: fiber cement board such as “Hardie-Plank” siding, 50-year siding product, wood, termite resistant, 50-year siding product (painted or natural), brick, stone, stucco, and other materials as approved by the review entity. 1. Exceptions: Single Family Detached residences, duplexes or triplexes within the SR1, SR2, and TR1 zoning districts may use, vinyl siding or concrete masonry units with stucco (C.B.S.) as external building materials d. Roof Materials: Architectural shingle or similar 30-year product, non-reflective metal, slate, and tile. Metal roofs shall have pronounced ridges with smooth panels. Article 6 Overlay District Design Standards – Draft_v2 – 12.12.23 9 R-Panel and AG-Panel metal shall be prohibited as a roofing material except within the RR and RA districts. e. Exposed Foundation materials: Shall be finished in either brick, stone, or stucco. f. Columns: Shall be equally spaced and positioned around window and door openings. Column spacing that exceeds the height of the columns is discouraged. g. Accessory Dwelling Units, Additions, and Structures 1. Design: Shall feature the same or similar materials that are present on the principal dwelling unit. 2. Roof Design: Shall feature similar roof slopes as the principal dwelling. There should be no more than two roof materials that compose a roof. Ancillary roofs may be of another materials when appropriately transitioned with flashing. 3. Size: In no instance shall and addition, ADU, or other structure exceed more than 50% of the gross floor area of the principal dwelling unit. h. Roofs 1. Types: Common roof types such as gabled, hipped, shed, barrel vaulted, flat, mono-pitch, and domed are permitted. Shed, flat, and mono-pitched roofs may be required to be concealed by the review body except when used for porches, balconies, or building extensions. 2. Slopes: A slope of 4:12-12:12 is appropriate for primary roofs, while ancillary roof slopes may be 3:12-5:12. Flat roofs shall be prohibited as a primary roof in residential districts, but may be used to break up rooflines to provide articulations in multi-family building. 3. Shadow Lines: To prevent privacy issues, when a two-story residence is proposed adjacent to one story (or vice versa), the proposed residence shall position roof slopes toward neighboring properties. i. Windows, Doors, and Openings 1. Design: Shall not be flush with exterior wall treatments and should be accompanied by architectural elements, such as the jambs, header, and sill. Window openings may be grouped horizontally, but trim between windows shall be at least 3.5 inches wide. 2. Size: Except for windows such as round, picture, accent, or transoms, windows should generally be taller than they are wide. j. Lighting 1. Building, landscaping, or any other exterior lighting shall be designed to prevent or minimize glare and shall be shielded to prevent light spillover. 2. Cornice lights, flood lights, or other directional lighting is discouraged. If installed, it shall be adequately shielded and installed. It shall be limited to 0.1 footcandle at adjacent property lines. k. Fences and Walls 1. Materials: Shall be composed of wood, brick, stone, or composite materials with a similar appearance. Chain link fencing is prohibited, except within RR or RA districts. 2. Height: Front and side yard fencing is limited to 4’ in height within 15’ of the front setback, and side setback when located on a corner. Privacy fence shall be Article 6 Overlay District Design Standards – Draft_v2 – 12.12.23 10 no taller than 8’. When a taller fence and a shorter fence meet, the transition between fence heights shall be designed and configured to either slope or step up gradually for a consistent design. l. Utility Meters: Shall be required for each dwelling unit and positioned on the side or rear of the residence. Utility meters that are visible from the public right-of-way shall be screened or otherwise camouflaged. m. Utility Areas 1. Utility Areas should be located in the rear or side yards and screened from the public right-of-way in compliance with Article 7.3.9. In addition, utility areas may encroach into required side or rear setbacks by 25%. 6.10.5 Standards Specific to Residence Type In addition to applicable provisions within this code, each residential building type shall have the following requirements: a. Single Family, Detached 1. Garage doors: No more than two garage bays may face or be parallel to the public right-of-way. Garages that face or parallel to the street shall be no wider than 20 feet in width or more than 50% of the width of the residence, whichever is smaller. Garage doors are encouraged to be oriented perpendicular to the street or accessed from a rear alley. b. Single Family, Attached 1. Parking Location: Driveways and garages shall be access from a rear lane or alley. 2. Entrances: Primary and secondary entrances as defined in Section 6.9.2 shall be configured and oriented towards one of the following, in order of priority: a. Public Streets and sidewalks b. Internal streets or parking lots c. Open space areas c. Duplex 1. Garages or Carports: Required to be located in the side or rear of the property. When located in a side yard, the structure shall be setback a minimum of 10’ from the front façade. If the carport is used for Article 6 Overlay District Design Standards – Draft_v2 – 12.12.23 11 storage other than a vehicle, it shall be enclosed or screened from the public right-of-way. d. Triplex 1. Garages or Carports: Only one driveway is permitted. Required to be located in the side or rear of the property. When located in a side yard, the structure shall be setback a minimum of 10’ from the front façade. If the carport is used for storage other than a vehicle, it shall be enclosed or screened from the public right-of-way. e. Multi-Family 1. Foundation: Minimum ground floor height from grade is 12”. 2. Entrances: Shall utilize either a stoop, forecourt, balcony, or porch entrance type. An entrance type is required for all independent and shared points of ingress or egress. Building frontages and entrances shall be configured and oriented towards one of the following, in order of priority: a. Public Streets and sidewalks b. Internal streets or parking lots c. Open space areas 3. Building Width: Shall not exceed more than 160 feet along any street frontage. No portion of the building shall exceed 160 feet in any direction. 4. Articulation: Street-facing building façades shall be articulated with wall offsets, in the form of recesses or projections from the primary façade plane, of at least two feet for every 50 linear feet of façade frontage. Projections or recesses shall extend from the grade to the top of the highest story in line with the ground-floor footprint. a. Roofline: Buildings with eaves shall be configured such that no single horizontal eave continues for more than 75 linear feet without being broken up by a gable, building projection, and articulation feature. 5. Garages: Carports are not permitted for multi-family buildings. Garages must be detached from the principal dwelling unit and shall be located toward the rear or side to be accessed off a secondary street. In no instance shall there be more than 6 garages connected within one structure. 6.10.6 Residential Subdivisions a. Design: Shall comply with applicable residential design standards within this section. b. Façade Elevation Variety: All residential buildings within a Major Subdivision application shall demonstrate a variety of façade designs. Proposed façade designs shall demonstrate the following in different housing products: such as Article 6 Overlay District Design Standards – Draft_v2 – 12.12.23 12 1. Different sized window openings and locations; 2. One- and two-story houses; exterior material finishes, and alternating garage location. The purpose of these regulations is to prevent a repetition of identical facade designs for adjacent lots or lots that face each other. Where home designs are repeated in new development, materials and detailing shall be varied to distinguish different houses. c. Garage Access: For subdivisions that create more than 30 lots, at least 50% of the proposed lots will demonstrate one of the following garage variations: 1. Side-loaded garages shall be located at a right angle to the street. The design of the garage wall facing the street shall have the same predominate materials used on the front façade. 2. Rear garages shall be located to the rear of the property either as a detached structure or part of the house. If constructed as part of the house, the part of the house, the front wall of the garage shall be setback at least 15 feet behind the front façade of the house Article 6 Overlay District Design Standards – Draft_v2 – 12.12.23 13 6.11 Downtown Design Standards 6.11.1 Introduction a. Purpose and Scope These guidelines aim to guide future development and ensure that new construction, renovations, and signage align with the existing architectural style and overall aesthetic of the downtown. By implementing these guidelines, the town seeks to create a cohesive and visually appealing environment that attracts residents and greater Chapin area while maintaining the small-town feel. More specifically, the objectives of the Downtown Overlay Design Guidelines are to accomplish the following: 1. Foster the development of a central civic space, or town center 2. Promoting commercial opportunities 3. Pedestrian scaled, short blocks, and hidden parking to promote walkability. 4. Compatible and inviting building design allowing space and opportunities for diverse activities b. Applicability 1. Map of District Article 6 Overlay District Design Standards – Draft_v2 – 12.12.23 14 6.11.2 Building Scale and Height a. Build-to lines 1. The maximum and minimum standards in Table 3.7 shall be conformed with in addition to the following build to requirements: a. A minimum of 80% of the front façade of all principal structures shall be located within the maximum setback requirement as stated in Table 3.7 for the zoning district in which the project is located in. b. For multiple buildings, a minimum of 40 percent the building façade within maximum front setback. b. Height 1. Maximum Height: Shall conform to the height requirements in Table 3.7. Setback for upper level stories are encouraged where there is a significant difference in the height of adjacent structures. 2. Rooftop Amenities: The ARB may allow a 10% increase in the height requirement to allow for rooftop lounges and patios, with the condition that it meets all other health and safety requirements. 6.11.3 Building Design a. Exterior Building Materials 1. Wall materials: Building walls visible from a public street or civic space shall be primarily brick or stone masonry units. a. Alternative Materials: Wooden materials may be utilized on building facades, but is not to exceed 25% of the façade area. Exterior insulation finishing systems (EIFS) or stacked stone may be used on a case-by-case to be determined by the ARB, however in no instance shall it consist than more than 10% of the façade. 1. Green walls: Green walls, living walls, or other wall to be covered with vines or other vegetation is permitted, but such proposals shall include evidence to support that the type of fixture and plantings do not have a structural effect on the wall in which it is being located. b. Prohibited Materials: Under no circumstances should stacked stone, sheet plywood, concrete block (CMU), unfinished poured concrete block, vinyl siding, metal siding, smooth-faced concrete block, tilt-up concrete panels or prefabricated steel panels and substitute materials not closely resembling painted wood clapboard c. Multiple Wall Materials: When 2 or more materials are used on a façade, the heavier material should be placed below the lighter material (e.g., siding over brick) to give the sense of support and grounding. 2. Foundation Materials: Visible foundation materials shall be finished in either brick, or stone. Article 6 Overlay District Design Standards – Draft_v2 – 12.12.23 15 3. Color: Approved Town of Chapin color palette, but no more than four colors complementary to each other will be allowed on the building. b. Façade Treatments 1. Cornices: Cornices and other similar elements are required to delineate the tops of facades. Expression lines are required to delineate the divisions between the first floor and upper floors 2. Facade Articulation: Long, unarticulated or blank facades, including but not limited to those characterized by unrelieved repetition of shape or form, are discouraged on any facade or portion of a facade visible or expected to be visible from a public or private street or from primary vehicular access points or parking areas. Specifically, projects shall conform to the following: 1. Shall not include expanses of blank walls (without any windows or doors) of 50 linear feet or greater. 2. May utilize architectural features or architectural divisions such as pilasters, false openings, or other technique acceptable by the review body to provide interest and articulation. b. Building Signage: All attached building signage proposed for a building, entry, patio area, or otherwise affiliated with the principal or accessory use shall be subject to review by the ARB. In addition to the requirements in Article 9 Signage, ARB shall consider the following regarding signage: 1. The size is proportionately compatible with the façade or structure in which it is affixed or mounted; 2. The colors and materials of the sign are compatible with the building, surrounding properties, or the multi-building site; 3. Signs shall be externally lit in addition to be shielded and directed to prevent spillover; and 4. The design of lights should be of design that complements the building without become a dominant architectural feature. c. Windows 1. Materials a. Permitted Materials: Wood, vinyl, aluminum (except mill finished), fiberglass, wood-clad, or composite materials approved by the review body that are similar to an approved listed material and conforms with projection, glazing, transparency, and other requirements within this section. b. Prohibited Materials: Mill finished aluminum is not permitted. 2. Size a. Facades should have several window sizes with smaller ones above. This is particularly important when buildings rise more than 2 stories. b. Window openings may be grouped horizontally, but trim between windows shall be at least 3.5 inches wide. This does not apply to storefront windows. 3. Projection Article 6 Overlay District Design Standards – Draft_v2 – 12.12.23 16 a. Windows should not be flush with exterior wall treatments. Windows should be recessed and include with an architectural surround at the jambs, header and sill. 4. Transparency a. Shall include a minimum of 40% of transparent fenestration (windows and doors) on the ground floor and 20% on upper floors. The ARB may reduce this requirement to minimum of 30% in certain instances. b. Clear glazing is preferred; however, the ARB may allow alternative glazing types in applications where they are the review authority. In no case shall glazing be less than 70% transparent for first floor windows. c. Spandrel glass is prohibited on ground floor windows. Mirrored glass with a reflectivity of less than 20% is prohibited 5. Shutters a. Shutters shall be sized and placed appropriately to cover, or appear to be able to, the openings. Operable shutters are encouraged. 6. Mullions and Muntins a. Thin mullions or muntins shall be required on windows larger than 2 feet in any direction, except for shopfronts. The depth of the mullion shall not be less than the width 7. Drive-through or Pick-up Service Windows a. Pick-up service windows are discouraged, however may be allowed by the ARB if positioned on a non-primary façade. For financial institution and for security reasons, a service window may be located within a building entrance (recessed entry is preferred) to allow for adequate lighting and surveillance. 8. Storm or Security Windows a. Location: Storm or security windows are discouraged when proposed on the exterior of the window, however are permitted if installed on the interior of an existing window. d. Doors 1. Materials: wood, metal, glass, or fiberglass. a. Prohibited Materials: Mill finished aluminum is not permitted. 2. Transparency: Doors shall comply and count towards the transparency requirement within this section. Transom windows and sidelights are encouraged to meet the transparency requirement. e. Railings and Balustrades 1. Materials: Wood, wrought iron, painted aluminum, or PVC. 2. Style: The railings shall reflect the style of the building to prevent the introduction of a new, conflicting element. 3. Spacing: The support posts for the railing or balustrade shall be in harmony with the window or column spacing along the façade in which it is located. f. Columns 1. Materials: Wood, fiber cement clad, cast iron, cast stone with smooth finish, or brick. Article 6 Overlay District Design Standards – Draft_v2 – 12.12.23 17 2. Spacing: Column bays shall be of equal and precise proportions. Column bays shall be located to be in harmony with the existing opening (window and door) pattern 3. Height: The height of columns shall be no larger than the distance between the next column, unless the balance would be otherwise disrupted due to the planned or existing opening pattern. 6.11.4 Roofs and Coverings a. Materials 1. Asphalt Shingles, Tile (clay, cement, natural or manufactured stone), Non- reflective pre-finished metal, with the exception of copper, and slate. Thermoplastic Polyolefin (TPO) for parapet or flat roofs is permitted. 2. Multiple materials on the same roof line are generally discouraged. 3. Ancillary roofs may be a different material, however it shall be appropriately transitioned with flashing and sloped. b. Roof relationships 1. The use of pitched roofs and roof overhangs that are consistent with neighboring buildings is encouraged. 2. Dramatic changes in roof slopes or roof types within the same block is not encouraged. c. Roof Forms 1. Standards Roof types: Common roof types such as gabled, hipped, shed, barrel vaulted, flat, mono-pitch, and domed are permitted. Shed, flat, and mono- pitched roofs may be required to be concealed by the review body except when used for porches, balconies, or building extensions. a. Parapet roofs shall not be permitted for buildings less than 10,000 sq. ft. Parapet roofs are discouraged, but may be considered by the ARB if the parapet has appropriate cornice design, caps, and periodic roof line interruptions. 2. Gutters: Downspouts and gutters are discouraged on primary facades and shall be composed of painted steel, aluminum, or copper, with finish materials to match the predominant materials found on the building. 3. Roof penetrations, such as roof access, shall be located within the interior of the building shall be hidden or painted to match the color of the roof. a. Skylights, satellite dishes, antennas, or other attachments shall be placed so they are screened from the view from the public right-of-way. 4. Slope: A slope of 4:12-12:12 is appropriate for primary roofs, while ancillary roof slopes may be 3:12-5:12. This regulation shall not prohibit flat roofs covered by a parapet designed in accordance within this section. d. Awnings and Canopies 1. Size: Shall not span more than one window or door opening, except for storefront windows that expand over 90% of the building’s primary façade. A minimum of 8 feet of vertical clearance must be maintained from the sidewalk grade. Article 6 Overlay District Design Standards – Draft_v2 – 12.12.23 18 2. Materials: Awnings should be made of a durable, weather fabric and metal only. 3. Supports: It is encouraged that the awning supports are concealed from view. 4. Colors: Colors and patterns shall be subject to the review body. In general colors and/or patterns shall complement the building materials and colors, as well as adjacent structures. 6.11.5 Outdoor Areas a. Fences and Walls 1. Materials: Shall be composed of brick, ornamental metal, cast iron, wood, stone, combination thereof, or appropriate and conforming materials that are consistent with materials found on the primary use. 2. Location: Screening walls and fencing are allowed only in side and rear yards and behind the front building line, with the exception of outdoor eating, merchandise display, and play areas. For those fences or walls within the front setback, or those on corner lots, the opaque portion shall be limited to a height of three feet from the ground. The remainder of the wall or fencing shall be ornamental metal and see-through. 3. Length: Fences and walls greater than 50 feet in length or six feet in height shall have a change in plane, height, material or material texture or significant landscape massing. 4. Height: Fences and walls within the front setback, as well as side setback if located on a corner, shall be no higher than 4’. Fences and walls used as privacy screens on the side or rear property line may be 8’ maximum. b. Decorative Features 1. Fountains: Shall only be approved when combined with a forecourt or similar type entrance, or a defined open space type in Table 5.5.3.a, Open Space Types. 2. Pedestrian and Bicycle Facilities: Shall be design and composed of materials that complete and blend in with surrounding buildings and landscaping. 3. Landscape Planters: May be used to define a perimeter of an outdoor area or entrance. Shall be design and composed of materials that complete and blend in with surrounding buildings and landscaping. c. Paving 1. Materials: Brick, stone, concrete, or similar material. 2. Patterns: Patterns such as running bond, herringbone, and basket weave are encouraged, however other patterns may be suggested that do not detract or conflict with the architectural elements of the primary building. 3. Borders: Borders for paving areas shall be required when paving materials are adjacent to landscaped areas. Borders are encouraged when defining patios, or other areas that are directly adjacent to the use. 4. Crosswalks: Shall be in compliance with Section 8.6.4. Materials used for crosswalks should be compatible with predominant materials used for the site and/or building facades. The ARB may allow stamping or other forms of giving texture to the crosswalk when appropriate. 6.11.6 Lighting Article 6 Overlay District Design Standards – Draft_v2 – 12.12.23 19 a. General Standards: All building façade lighting fixtures shall be limited to 25 watts per fixture, and not to exceed 4,000 Kelvin. No white or clear lights shall be permitted. All lights and lighting fixtures shall be directed towards the building, walkway, or landscape feature. In no instance shall lights move, rotate, change color, or be animated. In no instance shall LED signs be permitted. In no instance shall any light fixture exceed 0.5 foot-candles as measured 12” beyond the plane of the building or surface. Additionally, lighting fixtures are limited to 0.1 foot-candles at 36” beyond the building feature or surface being illuminated. b. Building Features: Lighting for building features and architectural elements are permitted, however shall be illuminated from an exterior or projecting fixture and not compromised of more than two colors. The fixture shall be appropriately shielded and directed to illuminated only the intended feature, and not spill over to any other buildings, tenant spaces, or public right-of-way. c. Design: Design of lighting elements that are affixed to the building and within patios or entrances shall be subject to review and shall complement the design of the building. d. Pavement Lighting: Embedded or directional lighting meant to illuminate pathways or patios, as a substitute or complement to overhead lighting, is permitted granted that it is shielded or directed appropriately to not spill over to any other buildings, tenant spaces, or public right-of-way. e. Landscape lighting: Shall be in compliance with Section 7.3.10. In addition, walkways shall have landscaping along at least 30% of their total length. Landscape lighting is limited to 900 lumens per fixture. f. Freestanding Light Poles: Shall be in compliance with Section 8.7 “Lighting”, Section 3.8.7 “Measurement of Height” and subject to the review by the Architectural Review Board. In no instance shall a pole exceed 12’ in height with the Downtown overlay, however the ARB may reduce this height depending on context, potential spillover, and scale. Light poles shall be permitted to have 12,000 lumens fixtures. 6.11.7 Utility, Waste, Service, and Loading Areas a. Loading facilities, loading docks, service doors, and other service areas, shall be located and/or screened so as not to be visible from a public street or park. b. Project elements like mechanical equipment (except small items such as fans and vents), utility meters, storage areas, solid waste containers (including dumpsters, compactors, recycling containers, and solid waste and recycling handling areas), transformers, generators, HVAC units and similar features, or other utility hardware on the building, roof, or ground shall be screened from public view with materials similar to the structure; OR they should be so located as not to be visible from any public street or from adjacent buildings. No wall-mounted building utility service equipment (e.g., electrical house panel boxes) shall be Article 6 Overlay District Design Standards – Draft_v2 – 12.12.23 20 placed on the public street right-of-way side of the building. c. Photovoltaic panels may be considered by the ARB, where such panels must be located within view of a public street or adjacent building in order to maximize solar exposure. d. All mechanical equipment shall be completely screened from the ground level of any adjacent property with architectural materials that are consistent with those used on the primary building. e. Ventilation grates or emergency exit doors located at the first-floor level in the building facade, which are oriented to any public street, should be decorative. Unless otherwise required by the building code, such grates and doors should be located away from pedestrian spaces (sidewalks and pedestrian paths). f. Electrical Vehicle Charing stations may be placed on a non-primary building façade or as standalone fixtures, however shall have neutral colors, or colors that complement the most adjacent structure to have minimum impact. Article 6 Overlay District Design Standards – Draft_v2 – 12.12.23 21 6.12 Corridor Design Standards 6.12.1 Introduction a. Purpose and Scope The Town desires to see the creation of commercial districts along its major transportation corridor that enhance the overall aesthetic appeal, livability, and functionality of these areas. Corridors often act as first impressions for a community, so development should reflect unique characteristics of the Town and differ from cookie-cutter development patterns. More specifically, the objectives of the Corridor Overlay Design Guidelines are to accomplish the following: 1. Enhancing visual appeal along corridors (first impressions) 2. Creating functional commercial environment that serve the local and regional community 3. Promote commercial developments that are interconnected with the community and act as nodes of activity throughout the community. 4. Prevent designs that lack context and are indistinguishable in design from similar projects. 5. Design commercial uses that they orient towards open spaces and outdoor areas, leading to a creation of village center environment. b. Applicability 1. Map 6.12.2 Building Scale and Height Article 6 Overlay District Design Standards – Draft_v2 – 12.12.23 22 a. Build-to lines 1. The maximum and minimum standards in Table 3.7 shall be conformed with in addition to the following build to requirements: a. A minimum of 40% of the front façade of all principal structures shall be located within the setback requirement as stated in Table 3.7 for the zoning district in which the project is located in. b. For sites with multiple buildings, buildings shall front a street right-of-way, parking area, or open space area with a defined entrance type. In cases where the buildings have more than one frontage, multiple entrances may be required. b. Height 1. Maximum Height: Shall conform to the height requirements in Table 3.7. 2. Rooftop Amenities: The ARB may allow a 10% increase in the height requirement to allow for roof line or building façade articulation. 6.12.3 Building Design a. Exterior Building Materials 1. Wall materials: Building walls visible from a public street or civic space shall be primarily brick or stone masonry units, wood clapboard, cementitious fiber board, and exposed heavy timber. a. Alternative Materials: Piecemeal embellishment and frequent changes in material and color shall be avoided, however certain materials may be permitted by the ARB with the following conditions: 1. Smooth stucco finishes may be used as an exterior building material, however at least of 25% of the building’s front and side façades must be either brick or stone. The placement of the materials shall follow the requirement in Section 6.12.3.a.1.c. below. 2. Exterior insulation finishing systems (EIFS) may be used as a secondary building material only (less than 25% of the wall area) on primary frontage facades. 3. Green walls: Green walls, living walls, or other wall to be covered with vines or other vegetation is permitted, but such proposals shall include evidence to support that the type of fixture and plantings do not have a structural effect on the wall in which it is being located. b. Prohibited Materials: Under no circumstances should stacked stone, sheet plywood, concrete block (CMU), unfinished poured concrete block, vinyl siding, metal siding, smooth-faced concrete block, tilt-up concrete panels or Article 6 Overlay District Design Standards – Draft_v2 – 12.12.23 23 prefabricated steel panels and substitute materials not closely resembling painted wood clapboard. c. Multiple Wall Materials: When 2 or more materials are used on a façade, the heavier material should be placed below the lighter material (e.g., siding over brick) to give the sense of support and grounding. 2. Foundation Materials: Visible foundation materials shall be finished in either brick, stucco, or stone. 3. Color: Approved Town of Chapin color palette, but no more than four colors complementary to each other will be allowed on the building. b. Façade Treatments 1. Cornices: Cornices and other similar elements are required to delineate the tops of facades. Expression lines are required to delineate the divisions between the first floor and upper floors 2. Façade Articulation: Long, unarticulated or blank facades, including but not limited to those characterized by unrelieved repetition of shape or form, are discouraged on any facade or portion of a facade visible or expected to be visible from a public or private street or from primary vehicular access points or parking areas. Specifically, projects shall conform to the following: 1. Shall not include expanses of blank walls of 50 linear feet or greater. 2. May utilize architectural features such as pilasters, false openings, façade step backs, downspout spacing, or other techniques acceptable by the review body to provide interest and articulation. b. Building Signage: All attached building signage proposed for a building, entry, patio area, or otherwise affiliated with the principal or accessory use shall be subject to review by the ARB. In addition to the requirements in Article 9 Signage, ARB shall consider the following regarding signage: 1. The size is proportionately compatible with the façade or structure in which it is affixed or mounted; 2. The colors and materials of the sign are compatible with the building, surrounding properties, or the multi-building site; 3. Signs shall be externally lit in addition to be shielded and directed to prevent spillover; and 4. The design of lights should be of design that complements the building without become a dominant architectural feature. c. Windows 1. Materials a. Permitted Materials: Wood, vinyl, aluminum (except mill finished), fiberglass, wood-clad, or composite materials approved by the review body Article 6 Overlay District Design Standards – Draft_v2 – 12.12.23 24 that are similar to an approved listed material and conforms with projection, glazing, transparency, and other requirements within this section. b. Prohibited Materials: Mill finished aluminum is not permitted. 2. Size a. Facades should have several window sizes with smaller ones above. This is particularly important when buildings rise more than 2 stories. b. Window openings may be grouped horizontally, but trim between windows shall be at least 3.5 inches wide. This does not apply to storefront windows. 3. Projection a. Windows should not be flush with exterior wall treatments. Windows should be recessed and include with an architectural surround at the jambs, header and sill. 4. Transparency a. Shall include a minimum of 30% of transparent fenestration (windows and doors) on the ground floor and 10% on upper floors. b. Clear glazing is preferred; however, the ARB may allow alternative glazing types in applications where they are the review authority. Tinting of windows shall be discouraged. In no case shall glazing be less than 70% transparent for first floor windows. c. Spandrel glass is prohibited on ground floor windows. The ARB may consider the use of spandrel glass on non-primary, rear, or upper floor windows. Mirrored glass with a reflectivity of less than 20% is prohibited 5. Shutters a. Shutters are not required, however shall be sized and placed appropriately to cover, or appear to be able to, the openings. Operable shutters are encouraged. 6. Mullions and Muntins a. Thin mullions or muntins shall be required on windows larger than 2 feet in any direction, except for storefront windows or shopfronts. The depth of the mullion shall not be less than the width 7. Storm or Security Windows a. Location: Storm or security windows are discouraged when proposed on the exterior of the window, however are permitted if installed on the interior of an existing window. d. Doors 1. Materials: wood, metal, glass, or fiberglass. a. Prohibited Materials: Mill finished aluminum is not permitted. Article 6 Overlay District Design Standards – Draft_v2 – 12.12.23 25 2. Transparency: Doors shall comply and count towards the transparency requirement within this section. Transom windows and sidelights are encouraged to meet the transparency requirement. e. Railings and Balustrades 1. Materials: Wood, wrought iron, painted aluminum, or PVC. 2. Style: The railings shall reflect the style of the building to prevent the introduction of a new, conflicting element. 3. Spacing: The support posts for the railing or balustrade shall be in harmony with the window or column spacing along the façade in which it is located. f. Columns 1. Materials: Wood, fiber cement clad, cast iron, concrete with smooth stucco finish, cast stone with smooth finish, or brick. 2. Spacing: Column bays shall be of equal and precise proportions. Column bays shall be located to be in harmony with the existing opening (window and door) pattern. 6.12.4 Roofs and Coverings a. Materials 1. Asphalt Shingles, Tile (clay, cement, natural or manufactured stone), Non- reflective pre-finished metal, copper, and slate. Thermoplastic Polyolefin (TPO) for parapet or flat roofs is permitted. 2. Multiple materials on the same roof line are generally discouraged. 3. Ancillary roofs may be a different material, however it shall be appropriately transitioned with flashing and sloped. b. Roof relationships 1. The use of pitched roofs and roof overhangs that are consistent with neighboring buildings is encouraged. 2. Dramatic changes in roof slopes or roof types within the same block is not encouraged. c. Roof Forms 1. Standards Roof types: Common roof types such as gabled, hipped, shed, barrel vaulted, flat, mono-pitch, and domed are permitted. Shed, flat, and mono- pitched roofs may be required to be concealed by the review body except when used for porches, balconies, or building extensions. a. Specific to Flat Roofs: A parapet shall be required for all flat roofs, or primary roofs with less than a 3:12 slope. Flat roofs, even when concealed by a parapet, shall not be permitted for buildings less than 10,000 sq. ft. Parapet roofs are discouraged, but may be considered by the ARB if the parapet has appropriate cornice design, caps, periodic roof line interruptions, or used in an effort to provide variety to a multi-building site. Article 6 Overlay District Design Standards – Draft_v2 – 12.12.23 26 b. Large Buildings with Parapet: For buildings exceeding 10,000 square feet, in addition to complying with façade and roofline articulation requirements, variation in the façade plane shall be required for primary facades that exceed 50’ in length, and may be required for secondary facades by the ARB if the building is positioned on a corner. 2. Gutters: Downspouts and gutters are discouraged on primary facades and shall be composed of painted steel, aluminum, or copper, with finish materials to match the predominant materials found on the building. 3. Roof penetrations, such as roof access, shall be located within the interior of the building shall be hidden or painted to match the color of the roof. a. Skylights, satellite dishes, antennas, or other attachments shall be placed so they are screened from the view from the public right-of-way. 4. Slope: A slope of 4:12-12:12 is appropriate for primary roofs, while ancillary roof slopes may be 3:12-5:12. This regulation shall not prohibit flat roofs covered by a parapet designed in accordance within this section. d. Awnings and Canopies 1. Size: Shall not span more than one window or door opening, except for storefront windows that expand over 90% of the building’s primary façade. A minimum of 8 feet of vertical clearance must be maintained from the sidewalk grade. 2. Materials: Awnings should be made of a durable, weather fabric and metal only. 3. Supports: It is encouraged that the awning supports are concealed from view. 4. Colors: Colors and patterns shall be subject to the review body. In general colors and/or patterns shall complement the building materials and colors, as well as adjacent structures. 6.12.5 Outdoor Areas a. Fences and Walls 1. Materials: Shall be composed of brick, ornamental metal, cast iron, wood, stone, combination thereof, or appropriate and conforming materials that are consistent with materials found on the primary use. 2. Location: Screening walls and fencing are allowed only in side and rear yards and behind the front building line, with the exception of outdoor eating, merchandise display, and play areas. For those fences or walls within the front setback, or those on corner lots, the opaque portion shall be limited to a height of three feet from the ground. The remainder of the wall or fencing shall be ornamental metal and see-through. Article 6 Overlay District Design Standards – Draft_v2 – 12.12.23 27 3. Length: Fences and walls greater than 50 feet in length or six feet in height shall have a change in plane, height, material or material texture or significant landscape massing. 4. Height: Fences and walls within the front setback, as well as side setback if located on a corner, shall be no higher than 4’. Fences and walls used as privacy screens on the side or rear property line may be 8’ maximum. b. Decorative Features 1. Fountains: Shall only be approved when combined with a forecourt or similar type entrance, or a defined open space type in Table 5.5.3.a, Open Space Types. 2. Pedestrian and Bicycle Facilities: Shall be design and composed of materials that complete and blend in with surrounding buildings and landscaping. 3. Landscape Planters: May be used to define a perimeter of an outdoor area or entrance. Shall be design and composed of materials that complete and blend in with surrounding buildings and landscaping. c. Paving 1. Materials: Brick, stone, concrete, or similar material. 2. Patterns: Patterns such as running bond, herringbone, and basket weave are encouraged, however other patterns may be suggested that do not detract or conflict with the architectural elements of the primary building. 3. Borders: Borders for paving areas shall be required when paving materials are adjacent to landscaped areas. Borders are encouraged when defining patios, or other areas that are directly adjacent to the use. 4. Crosswalks: Shall be in compliance with Section 8.6.4. Materials used for crosswalks should be compatible with predominant materials used for the site and/or building facades. The ARB may allow stamping or other forms of giving texture to the crosswalk when appropriate. 6.12.6 Lighting a. General Standards: All building façade lighting fixtures shall be limited to 1,000 lumens per fixture, and not to exceed 4,000 Kelvin. No white or clear lights shall be permitted. All lights and lighting fixtures shall be directed towards the building, walkway, or landscape feature. In no instance shall lights move, rotate, change color, or be animated. In no instance shall LED signs be permitted. In no instance shall any light fixture exceed 0.5 foot-candles as measured 12” beyond the plane of the building or surface. Additionally, lighting fixtures are limited to 0.1 foot-candles at 36” beyond the building feature or surface being illuminated. b. Building Features: Lighting for building features and architectural elements are permitted, however shall be illuminated from an exterior or projecting fixture and not compromised of more than two colors. The fixture shall be appropriately shielded and directed to illuminated only the intended feature, and not spill over to any other buildings, tenant spaces, or public right-of-way. c. Design: Design of lighting elements that are affixed to the building and within patios or entrances shall be subject to review and shall complement the design of the building. Article 6 Overlay District Design Standards – Draft_v2 – 12.12.23 28 d. Pavement Lighting: Embedded or directional lighting meant to illuminate pathways or patios, as a substitute or complement to overhead lighting, is permitted granted that it is shielded or directed appropriately to not spill over to any other buildings, tenant spaces, or public right-of-way. e. Landscape lighting: Shall be in compliance with Section 7.3.10. In addition, walkways shall have landscaping along at least 30% of their total length. Landscape lighting is limited to 900 lumenss per fixture. f. Freestanding Light Poles: Shall be in compliance with Section 8.7 “Lighting”, Section 3.8.7 “Measurement of Height” and subject to the review by the Architectural Review Board. In no instance shall a pole exceed 25’ in height with the Corridor overlay, however the ARB may reduce this height depending on context, potential spillover, and scale. Light poles shall be permitted to have 12,000 lumens fixtures. 6.12.7 Utility, Waste, Service, and Loading Areas a. Loading facilities, loading docks, service doors, and other service areas, shall be located and/or screened so as not to be visible from a public street or park. b. Project elements like mechanical equipment (except small items such as fans and vents), utility meters, storage areas, solid waste containers (including dumpsters, compactors, recycling containers, and solid waste and recycling handling areas), transformers, generators, HVAC units and similar features, or other utility hardware on the building, roof, or ground shall be screened from public view with materials similar to the structure; OR they should be so located as not to be visible from any public street or from adjacent buildings. No wall-mounted building utility service equipment (e.g., electrical house panel boxes) shall be placed on the public street right-of-way side of the building. c. Photovoltaic panels may be considered by the ARB, where such panels must be located within view of a public street or adjacent building in order to maximize solar exposure. d. All mechanical equipment shall be completely screened from the ground level of any adjacent property with architectural materials that are consistent with those used on the primary building. e. Ventilation grates or emergency exit doors located at the first-floor level in the building facade, which are oriented to any public street, should be decorative. Unless otherwise required by the building code, such grates and doors should be located away from pedestrian spaces (sidewalks and pedestrian paths). f. Electrical Vehicle Charing stations may be placed on a non-primary building façade or as standalone fixtures, however shall have neutral colors, or colors that complement the most adjacent structure to have minimum impact. 6.12.8 Use Related Standards In addition to the conditional use standards within Article 4, specific uses shall have the following conditions: a. Drive-through or Pick-up Service Windows 1. Drive-through or pick-up windows shall be prohibited on the street frontage side of a building. When a building is located on a corner lot, drive-through windows shall be prohibited on the side facing the street with the more traveled Article 6 Overlay District Design Standards – Draft_v2 – 12.12.23 29 street. For financial institution and for security reasons, a service window may be located within a or adjacent building entrance to allow for adequate lighting and surveillance. b. Uses Related to Culture, Arts, or Local Producers 1. Purpose: To allow the construction or redevelopment of certain uses that help promote the local arts and culture of the Town, as described in the Town’s Comprehensive Plan, the ARB may allow certain design exemptions to the following defined uses: a. Micro-Brewery, Winery, or Distillery Exemptions 1. Build-to-lines: May be exempted from build-to-lines 2. Exterior Materials: May be allowed to use metal as a siding material, however they shall not occupy more than 50% of the front façade. 3. Roof Materials: May be allowed to use R-panel or AG-panel, or other corrugated metal roofing products for ancillary roofs. This shall not include awnings. 4. Outdoor Areas: May be allowed in the front of the building façade. b. Art Galleries or Studios 1. Exterior Materials: May be allowed to use metal as a siding material, however they shall not occupy more than 50% of the front façade. 2. Signage: The ARB may permit decorative signage, such as object signs, that directly relate to production of quality crafts. 3. Roof Materials: May be allowed to use R-panel or AG-panel, or other corrugated metal roofing products for ancillary roofs. This shall not include awnings. c. Specialty Retail Shops (Artisanal Crafting) 1. Exterior Materials: May be allowed to use metal as a siding material, however they shall not occupy more than 50% of the front façade. 2. Roof Materials: May be allowed to use R-panel or AG-panel, or other corrugated metal roofing products for ancillary roofs. This shall not include awnings. Article 6 Overlay District Design Standards – Draft_v2 – 12.12.23 30 6.13 Interstate Design Standards 6.13.1 Introduction a. Purpose and Scope These guidelines aim to guide future development and ensure that new construction, renovations, and signage enhance the visual appeal, functionality, and overall quality of the areas adjacent to the interstate, creating a cohesive and attractive environment for residents, businesses, and travelers. More specifically, the objectives of the Interstate Overlay Design Guidelines are to accomplish the following: 1. Create a welcoming and attractive business environment for new and existing businesses. 2. Develop great first impressions for residents and visitors when they enter Chapin by enforcing quality materials and design choices. 3. Create developments that are visually cohesive and distinguish Chapin from another Town’s along the interstate. 4. Preserve prominent vegetation to prevent large expanses of pavement. b. Applicability 1. Map Excerpt Article 6 Overlay District Design Standards – Draft_v2 – 12.12.23 31 6.13.2 Building Scale and Height a. Build-to lines 1. The maximum and minimum standards in Table 3.7 shall be conformed with in addition to the following build to requirements: a. For multiple buildings, a minimum of 40 percent of the linear frontage of parcel (property) shall be occupied by a building façade within front setbacks. 6.13.3 Building Design a. Exterior Building Materials 1. Wall materials: Building walls visible from a public street or civic space should be primarily brick or stone masonry units, architecturally finished tilt-up concrete panels, wood clapboard, cementitious fiber board, and exposed heavy timber. Piecemeal embellishment and frequent changes in material and color shall be avoided. a. Alternative Materials 1. Exterior insulation finishing systems (EIFS) may be used as a secondary building material including the front façade. However, EIFS is limited to 25% of the façade area on the front façade, and 50% of all other facades. When EIFS is proposed, at least 25% of the building’s front and side facades must be either brick or stone. 2. Green walls: Green walls, living walls, or other wall to be covered with vines or other vegetation is permitted, but such proposals shall include evidence to support that the type of fixture and plantings do not have a structural effect on the wall in which it is being located. b. Prohibited Materials: Under no circumstances should sheet plywood, concrete block (CMU), unfinished poured concrete block, vinyl siding, metal siding, smooth-faced concrete block, or prefabricated steel panels and substitute materials not closely resembling painted wood clapboard. c. Multiple Wall Materials: When 2 or more materials are used on a façade, the heavier material should be placed below the lighter material (e.g., siding over brick) to give the sense of support and grounding. 2. Foundation Materials: Visible foundation materials shall be finished in either brick, stacked stone, stone, or stucco. 3. Color: Approved Town of Chapin color palette, but no more than four colors complementary to each other will be allowed on the building. b. Façade Treatments 1. Cornices: Cornices and other similar elements are required to delineate the tops of facades. Expression lines are required to delineate the divisions between the first floor and upper floors 2. Façade Articulation: Long, unarticulated or blank facades, Article 6 Overlay District Design Standards – Draft_v2 – 12.12.23 32 including but not limited to those characterized by unrelieved repetition of shape or form, are discouraged on any facade or portion of a facade visible or expected to be visible from a public or private street or from primary vehicular access points or parking areas. Specifically, projects shall conform to the following: 1. Shall not include expanses of blank walls of 75 linear feet or greater. 2. May utilize architectural features such as pilasters, false openings, façade step backs, downspout spacing, or other techniques acceptable by the review body to provide interest and articulation. b. Building Signage: All attached building signage proposed for a building, entry, patio area, or otherwise affiliated with the principal or accessory use shall be subject to review by the ARB. In addition to the requirements in Article 9 Signage, ARB shall consider the following regarding signage: 1. The size is proportionately compatible with the façade or structure in which it is affixed or mounted; 2. The colors and materials of the sign are compatible with the building, surrounding properties, or the multi-building site; 3. Signs shall be externally lit in addition to be shielded and directed to prevent spillover; and 4. The design of lights should be of design that complements the building without become a dominant architectural feature. c. Windows 1. Materials a. Permitted Materials: Wood, vinyl, aluminum (except mill finished), fiberglass, wood-clad, or composite materials approved by the review body that are similar to an approved listed material and conforms with projection, glazing, transparency, and other requirements within this section. b. Prohibited Materials: Mill finished aluminum is not permitted. 2. Size a. Facades should have several window sizes with smaller ones above. This is particularly important when buildings rise more than 2 stories. b. Window openings may be grouped horizontally, but trim between windows shall be at least 3.5 inches wide. This does not apply to storefront windows. 3. Projection a. Windows should not be flush with exterior wall treatments. Windows should be recessed and include with an architectural surround at the jambs, header and sill. 4. Transparency Article 6 Overlay District Design Standards – Draft_v2 – 12.12.23 33 a. Shall include a minimum of 20% of transparent fenestration (windows and doors) on the ground floor. b. Clear glazing is preferred; however, the ARB may allow alternative glazing types in applications where they are the review authority. Tinting of windows shall be discouraged. In no case shall glazing be less than 70% transparent for first floor windows. c. Spandrel glass is prohibited on windows on the primary façade. The ARB may consider the use of spandrel glass on non-primary, rear, or upper floor windows, however spandrel glass cannot remedy transparency percentage requirements. Mirrored glass with a reflectivity of less than 20% is prohibited on primary facades. 5. Shutters a. Shutters are not required, however shall be sized and placed appropriately to cover, or appear to be able to, the openings. Operable shutters are encouraged. 6. Mullions and Muntins a. Thin mullions or muntins shall be required on windows larger than 2 feet in any direction, except for storefront windows or shopfronts. The depth of the mullion shall not be less than the width 7. Storm or Security Windows a. Location: Storm or security windows are discouraged when proposed on the exterior of the window, however are permitted if installed on the interior of an existing window. d. Doors 1. Materials: wood, metal, glass, or fiberglass. a. Prohibited Materials: Mill finished aluminum is not permitted. 2. Transparency: Doors shall comply and count towards the transparency requirement within this section. Transom windows and sidelights are encouraged to meet the transparency requirement. e. Railings and Balustrades 1. Materials: Wood, wrought iron, painted aluminum, or PVC. 2. Style: The railings shall reflect the style of the building to prevent the introduction of a new, conflicting element. 3. Spacing: The support posts for the railing or balustrade shall be in harmony with the window or column spacing along the façade in which it is located. f. Columns 1. Materials: Wood, fiber cement clad, cast iron, concrete with smooth stucco finish, cast stone with smooth finish, or brick. 2. Spacing: Column bays shall be of equal and precise proportions. Column bays shall be located to be in harmony with the existing opening (window and door) pattern. 6.13.4 Roofs and Coverings a. Materials Article 6 Overlay District Design Standards – Draft_v2 – 12.12.23 34 1. Asphalt Shingles, Tile (clay, cement, natural or manufactured stone), Non- reflective pre-finished metal, copper, and slate, or similar material as determined by the ARB. Thermoplastic Polyolefin (TPO) for parapet or flat roofs is permitted. 2. Multiple materials on the same roof line are generally discouraged. 3. Ancillary roofs may be a different material, however it shall be appropriately transitioned with flashing and sloped. b. Roof relationships 1. The use of pitched roofs and roof overhangs that are consistent with neighboring buildings is encouraged. 2. Dramatic changes in roof slopes or roof types within the same block is not encouraged. c. Roof Forms 1. Standards Roof types: Common roof types such as gabled, hipped, shed, barrel vaulted, flat, mono-pitch, and domed are permitted. Shed, flat, and mono- pitched roofs may be required to be concealed by the review body except when used for porches, balconies, or building extensions. a. Specific to Flat Roofs: A parapet shall be required for all flat roofs, or primary roofs with less than a 3:12 slope. Flat roofs, even when concealed by a parapet, shall not be permitted for buildings less than 10,000 sq. ft. Parapet roofs are discouraged, but may be considered by the ARB if the parapet has appropriate cornice design, caps, periodic roof line interruptions, or used in an effort to provide variety to a multi-building site. b. Large Buildings with Parapet: For buildings exceeding 10,000 square feet, in addition to complying with façade and roofline articulation requirements, variation in the façade plane shall be required for primary facades that exceed 75’ in length, and may be required for secondary facades by the ARB if the building is positioned on a corner. 2. Gutters: Downspouts and gutters are discouraged on primary facades and shall be composed of painted steel, aluminum, or copper, with finish materials to match the predominant materials found on the building. 3. Roof penetrations, such as roof access, shall be located within the interior of the building shall be hidden or painted to match the color of the roof. a. Skylights, satellite dishes, antennas, or other attachments shall be placed so they are screened from the view from the public right-of-way. 4. Slope: A slope of 4:12-12:12 is appropriate for primary roofs, while ancillary roof slopes may be 3:12-5:12. This regulation shall not prohibit flat roofs covered by a parapet designed in accordance within this section. d. Awnings and Canopies 1. Size: Shall not span more than one window or door opening, except for storefront windows that expand over 90% of the building’s primary façade. A minimum of 8 feet of vertical clearance must be maintained from the sidewalk grade. Article 6 Overlay District Design Standards – Draft_v2 – 12.12.23 35 2. Materials: Awnings should be made of a durable, weather fabric and metal only. 3. Supports: It is encouraged that the awning supports are concealed from view. 4. Colors: Colors and patterns shall be subject to the review body. In general colors and/or patterns shall complement the building materials and colors, as well as adjacent structures. 6.13.5 Outdoor Areas a. Fences and Walls 1. Materials: Shall be composed of brick, ornamental metal, cast iron, wood, stone, combination thereof, or appropriate and conforming materials that are consistent with materials found on the primary use. 2. Location: Screening walls and fencing are allowed only in side and rear yards and behind the front building line, with the exception of outdoor eating, merchandise display, and play areas. For those fences or walls within the front setback, or those on corner lots, the opaque portion shall be limited to a height of three feet from the ground. The remainder of the wall or fencing shall be ornamental metal and see-through. 3. Length: Fences and walls greater than 50 feet in length or six feet in height shall have a change in plane, height, material or material texture or significant landscape massing. 4. Height: Fences and walls within the front setback, as well as side setback if located on a corner, shall be no higher than 4’. Fences and walls used as privacy screens on the side or rear property line may be 8’ maximum. b. Decorative Features 1. Fountains: Shall not be designed as the predominant architectural feature, however may be placed at pedestrian or vehicular entrances. 2. Pedestrian and Bicycle Facilities: Shall be design and composed of materials that complete and blend in with surrounding buildings and landscaping. 3. Landscape Planters: May be used to define a perimeter of an outdoor area or entrance. Shall be design and composed of materials that complete and blend in with surrounding buildings and landscaping. c. Paving 1. Materials: Brick, stone, concrete, or similar material. 2. Patterns: Patterns such as running bond, herringbone, and basket weave are encouraged, however other patterns may be suggested that do not detract or conflict with the architectural elements of the primary building. 3. Borders: Borders for paving areas shall be required when paving materials are adjacent to landscaped areas. Borders are encouraged when defining patios, or other areas that are directly adjacent to the use. Article 6 Overlay District Design Standards – Draft_v2 – 12.12.23 36 4. Crosswalks: Shall be in compliance with Section 8.6.4. Materials used for crosswalks should be compatible with predominant materials used for the site and/or building facades. The ARB may allow stamping or other forms of giving texture to the crosswalk when appropriate. 6.13.6 Lighting a. General Standards: All lighting fixtures shall be limited to 1,000 lumens per fixture, and not to exceed 4,000 Kelvin. No white or clear lights shall be permitted. All lights and lighting fixtures shall be directed towards the building, walkway, or landscape feature. In no instance shall lights move, rotate, change color, or be animated. In no instance shall any light fixture exceed 0.5 foot-candles as measured 12” beyond the plane of the building or surface. Additionally, lighting fixtures are limited to 0.1 foot-candles at 36” beyond the building feature or surface being illuminated. b. Building Features: Lighting for building features and architectural elements are permitted, however shall be illuminated from an exterior or projecting fixture and not compromised of more than two colors. The fixture shall be appropriately shielded and directed to illuminated only the intended feature, and not spill over to any other buildings, tenant spaces, or public right-of-way. c. Design: Design of lighting elements that are affixed to the building and within patios or entrances shall be subject to review and shall complement the design of the building. d. Pavement Lighting: Embedded or directional lighting meant to illuminate pathways or patios, as a substitute or complement to overhead lighting, is permitted granted that it is shielded or directed appropriately to not spill over to any other buildings, tenant spaces, or public right-of-way. e. Landscape lighting: Shall be in compliance with Section 7.3.10. In addition, walkways shall have landscaping along at least 30% of their total length. f. Light Poles: Shall be in compliance with Section 8.7 “Lighting”, Section 3.8.7 “Measurement of Height” and subject to the review by the Architectural Review Board. In no instance shall a pole exceed 40’ in height with the Interstate overlay, however the ARB may reduce this height depending on context, potential spillover, and scale. Light poles shall be permitted to have 12,000 lumens fixtures. 6.13.7 Utility, Waste, Service, and Loading Areas a. Loading facilities, loading docks, service doors, and other service areas, shall be located and/or screened so as not to be visible from a public street or park. b. Project elements like mechanical equipment (except small items such as fans and vents), utility meters, storage areas, solid waste containers (including dumpsters, compactors, recycling containers, and solid waste and recycling handling areas), transformers, generators, HVAC units and similar features, or other utility hardware Article 6 Overlay District Design Standards – Draft_v2 – 12.12.23 37 on the building, roof, or ground shall be screened from public view with materials similar to the structure; OR they should be so located as not to be visible from any public street or from adjacent buildings. No wall-mounted building utility service equipment (e.g., electrical house panel boxes) shall be placed on the public street right-of-way side of the building. c. Photovoltaic panels may be considered by the ARB, where such panels must be located within view of a public street or adjacent building in order to maximize solar exposure. d. All mechanical equipment shall be completely screened from the ground level of any adjacent property with architectural materials that are consistent with those used on the primary building. e. Ventilation grates or emergency exit doors located at the first-floor level in the building facade, which are oriented to any public street, should be decorative. Unless otherwise required by the building code, such grates and doors should be located away from pedestrian spaces (sidewalks and pedestrian paths). f. Electrical Vehicle Charing stations may be placed on a non-primary building façade or as standalone fixtures, however shall have neutral colors, or colors that complement the most adjacent structure to have minimum impact. 6.13.8 Use Related Standards In addition to the conditional use standards within Article 4, specific uses shall have the following conditions: a. Drive-through or Pick-up Service Windows 1. Drive-through or pick-up windows shall be prohibited on the street frontage side of a building. When a building is located on a corner lot, drive-through windows shall be prohibited on the side facing the street with the more traveled street. For financial institution and for security reasons, a service window may be located within a or adjacent building entrance to allow for adequate lighting and surveillance. b. Uses Related to Culture, Arts, or Local Producers 1. Purpose: To allow the construction or redevelopment of certain uses that help promote the local arts and culture of the Town, the ARB may allow certain design exemptions to the following defined uses: a. Micro-Brewery, Winery, or Distillery Exemptions 1. Build-to-lines: May be exempted from build-to-lines 2. Exterior Materials: May be allowed to use metal as a siding material, however they shall not occupy more than 50% of the front façade. 3. Roof Materials: May be allowed to use R-panel or AG-panel, or other corrugated metal roofing products for ancillary roofs. This shall not include awnings. 4. Outdoor Areas: May be allowed in the front of the building façade. b. Art Galleries or Studios Article 6 Overlay District Design Standards – Draft_v2 – 12.12.23 38 1. Exterior Materials: May be allowed to use metal as a siding material, however they shall not occupy more than 50% of the front façade. 2. Signage: The ARB may permit decorative signage, such as object signs, that directly relate to production of quality crafts. 3. Roof Materials: May be allowed to use R-panel or AG-panel, or other corrugated metal roofing products for ancillary roofs. This shall not include awnings. c. Specialty Retail Shops (Artisanal Crafting) 1. Exterior Materials: May be allowed to use metal as a siding material, however they shall not occupy more than 50% of the front façade. 2. Roof Materials: May be allowed to use R-panel or AG-panel, or other corrugated metal roofing products for ancillary roofs. This shall not include awnings. Article 6 Overlay District Design Standards – Draft_v2 – 12.12.23 39 6.14 Craftsman Overlay 6.14.1 Introduction a. Purpose and Intent b. Applicability: All properties, existing or created, that have frontage and/or having access off of Lexington Avenue and identified by the corresponding map. The overlay district will start at the intersection of (blank), traveling southward on Lexington Avenue and Old Lexington Avenue until the Town Boundary. 1. Map of Boundaries c. Alternative Designs: No to stifle or limit creativity. The applicant may propose additional or alternative designs, however they shall provide evidence that the proposed design is appropriate for the craftsman or bungalow architectural style. d. Exceptions: If there is another architectural style present on a nonconforming building, the ARB may waive the requirements to prevent the creation of conflicting Article 6 Overlay District Design Standards – Draft_v2 – 12.12.23 40 architectural elements that can disrupt a buildings features, original design, or original materials. 6.14.2 Building Scale and Height a. Building Height: Craftsman style buildings usually do not exceed 1.5 stories, or about 25’, however the ARB shall consider the craftsman elements in a new building, the proposed use, and the context in which the building is proposing when reviewing the building’s height. b. Shape: The overall shape of the building footprint should be rectangular. An L- Shaped to accommodate for a side porch, or secondary entrance is also encouraged. An L-Shape building footprint may be required by the ARB to prevent and balance long or wide buildings. 6.14.3 Building Design a. Exterior Building Materials 1. Façade Materials: The predominant material shall be either wood shiplap siding. Fiber cement board, or similar product, is permitted. a. Prohibited Materials: Under no circumstances should stacked stone, sheet plywood, concrete block (CMU), unfinished poured concrete block, vinyl siding, metal siding, smooth-faced concrete block, tilt-up concrete panels or prefabricated steel panels and substitute materials not closely resembling painted wood clapboard. 2. Foundation Materials: Materials that form the foundation, column bases, or steps may be brick or stone (except stacked stone) 3. Exterior Colors: Shall be approved by the ARB and comply with the approved paint color palette of the Town. b. Façade Treatments 1. Façade Articulation: Long, unarticulated or blank facades, including but not limited to those characterized by unrelieved repetition of shape or form, are discouraged on any facade or portion of a facade visible or expected to be visible from a public or private street or from primary vehicular access points or parking areas. Specifically, projects shall conform to the following: 1. Shall not include expanses of blank walls (without any windows or doors) of 50 linear feet or greater. 2. May utilize architectural features or architectural divisions such as pilasters, false openings, or other technique acceptable by the review body to provide interest and articulation. c. Building Signage 1. All attached building signage proposed for a building, entry, patio area, or otherwise affiliated with the principal or accessory use shall be subject to review by the ARB. In addition to the requirements in Article 9 Signage, ARB shall consider the following regarding signage: Article 6 Overlay District Design Standards – Draft_v2 – 12.12.23 41 a. The size is proportionately compatible with the façade or structure in which it is affixed or mounted; b. The colors and materials of the sign are compatible with the building, surrounding properties, or the multi-building site; c. Signs shall be externally lit in addition to be shielded and directed to prevent spillover; and d. The design of lights should be of design that complements the building without become a dominant architectural feature. d. Entrances 1. Type Required: Front porch entrance type required. Handicap accessible ramps shall be positioned on the side façade or to the side of the primary entrance while providing direct access to pedestrian facilities. e. Columns 1. Shape: Shall be tapered down to be ad the widest at the base. 2. Column Materials: Shall be either wood, fiber cement, or finished with smooth stucco. 3. Column Base: Shall be finished in either brick, stone, or wooden shingles. f. Windows 1. Materials: Permitted materials for windows include wood, vinyl, aluminum (except mill finished), fiberglass, wood-clad, or composite materials approved by the review body that are similar to an approved listed material and conforms with projection, glazing, transparency, and other requirements within this section. 2. Transparency: Facades that face a public right-of-way or parking lot shall be required to include 20% of transparency fenestration on the ground floor. Dormers that are useable or false. Ground floor windows shall be at least 70% transparent. The ARB may modify the transparency requirement in cases where a financial institution, medical facility, or similar facility requires privacy or security. Spandrel glass is prohibited. 3. Size: Facades should have several window sizes with smaller ones above. This is particularly important when buildings rise more than 2 stories. Window openings may be grouped horizontally, but trim between windows shall be at least 3.5 inches wide. 4. Projection: Windows should not be flush with exterior wall treatments. Windows should be recessed and include with an architectural surround at the jambs, header and sill. 5. Shutters: Shutters shall be sized and placed appropriately to cover, or appear to be able to, the openings. Operable shutters are encouraged. Article 6 Overlay District Design Standards – Draft_v2 – 12.12.23 42 6. Mullions and Muntins: Thin mullions or muntins shall be required on windows larger than 2 feet in any direction, except for shopfronts. The depth of the mullion shall not be less than the width g. Doors 1. Materials: wood, metal, glass, or fiberglass. a. Prohibited Materials: Mill finished aluminum is not permitted. 6.14.4 Roofs a. Materials: Asphalt or wooden shingles required. The ARB may approve non- reflective metal in some instances, however R-panel, AG-Panel, or any other corrugated metal shall not be permitted. b. Roof Types: The use of one or more of the roof types is required; Hipped, Front Facing Gable, Cross Gable, or Side Gable. No flat roofs permitted. c. Roof Elements: The use of overhanging eaves and exposed rafters are required. The following may be used or required by the ARB during review. Dormers and other craftsman style roof penetrations are permitted. No mechanical, utility, or ventilation elements shall be located on the roof. Roof access shall be internal, or located on a façade that is not directly visible form the public right-of-way or parking areas. d. Roof Slope: Craftsman roof slopes are encouraged to at or under a 4 over 12 slopes. In no instance shall a roof be more than 6 over 12. 6.14.5 Porches a. Steps: Front steps leading to the porch entrances are required, and shall be directly adjacent to a sidewalk. b. Handrails and Balustrade: Appearance of handcrafted or supported with historical or other evidence that it is emulating the craftsman/bungalow architecture 6.14.6 Outdoor Areas a. Fences and Walls 1. Materials: Shall be composed of brick, ornamental metal, cast iron, wood, stone, combination thereof, or appropriate and conforming materials that are consistent with materials found on the primary use. 2. Location: Screening walls and fencing are allowed only in side and rear yards and behind the front building line, with the exception of outdoor eating, merchandise display, and play areas. For those fences or walls within the front setback, or those on corner lots, the opaque portion shall be limited to a height of three feet from the ground. The remainder of the wall or fencing shall be ornamental metal and see-through. 3. Length: Fences and walls greater than 50 feet in length or six feet in height shall have a change in plane, height, material or material texture or significant landscape massing. Article 6 Overlay District Design Standards – Draft_v2 – 12.12.23 43 4. Height: Fences and walls within the front setback, as well as side setback if located on a corner, shall be no higher than 4’. Fences and walls used as privacy screens on the side or rear property line may be 8’ maximum. b. Decorative Features 1. Fountains: Shall only be approved when combined with a forecourt or similar type entrance, or a defined open space type in Table 5.5.3.a, Open Space Types. 2. Pedestrian and Bicycle Facilities: Shall be design and composed of materials that complete and blend in with surrounding buildings and landscaping. 3. Landscape Planters: May be used to define a perimeter of an outdoor area or entrance. Shall be design and composed of materials that complete and blend in with surrounding buildings and landscaping. c. Paving 1. Materials: Brick, stone, concrete, or similar material. 2. Patterns: Patterns such as running bond, herringbone, and basket weave are encouraged, however other patterns may be suggested that do not detract or conflict with the architectural elements of the primary building. 3. Borders: Borders for paving areas shall be required when paving materials are adjacent to landscaped areas. Borders are encouraged when defining patios, or other areas that are directly adjacent to the use. 4. Crosswalks: Shall be in compliance with Section 8.6.4. Materials used for crosswalks should be compatible with predominant materials used for the site and/or building facades. The ARB may allow stamping or other forms of giving texture to the crosswalk when appropriate. 6.14.7 Lighting a. General Standards: All lighting fixtures shall be limited to 1,000 lumens per fixture, and not to exceed 4,000 Kelvin. No white or clear lights shall be permitted. All lights and lighting fixtures shall be directed towards the building, walkway, or landscape feature. In no instance shall lights move, rotate, change color, or be animated. In no instance shall LED signs be permitted. In no instance shall any light fixture exceed 0.5 foot-candles as measured 12” beyond the plane of the building or surface. Additionally, lighting fixtures are limited to 0.1 foot-candles at 36” beyond the building feature or surface being illuminated. b. Design: Design of lighting elements that are affixed to the building and within patios or entrances shall be subject to review and shall complement the design of the building. c. Pavement Lighting: Embedded or directional lighting meant to illuminate pathways or patios, as a substitute or complement to overhead lighting, is permitted granted that it is shielded or directed appropriately to not spill over to any other buildings, tenant spaces, or public right-of-way. d. Landscape lighting: Shall be in compliance with Section 7.3.10. In addition, walkways shall have landscaping along at least 30% of their total length. e. Freestanding Light Poles: Shall be in compliance with Section 8.7, Lighting, and subject to the review by the Architectural Review Board. In no instance shall a pole exceed 25’ in height. Article 6 Overlay District Design Standards – Draft_v2 – 12.12.23 44 6.14.8 Utility, Waste, Service, and Loading Areas a. Loading facilities, loading docks, service doors, and other service areas, shall be located and/or screened so as not to be visible from a public street or park. b. Project elements like mechanical equipment (except small items such as fans and vents), utility meters, storage areas, solid waste containers (including dumpsters, compactors, recycling containers, and solid waste and recycling handling areas), transformers, generators, HVAC units and similar features, or other utility hardware on the ground shall be screened from public view with materials similar to the structure; OR they should be so located as not to be visible from any public street or from adjacent buildings. No wall-mounted building utility service equipment (e.g., electrical house panel boxes) shall be placed on the building. c. All mechanical equipment shall be completely screened from the ground level of any adjacent property with brick, stone, wooden clapboard siding, or fiber cement board, or other materials that are consistent with those used on the primary building. d. Ventilation grates or emergency exit doors located at the first-floor level in the building facade, which are oriented to any public street, should be decorative. Unless otherwise required by the building code, such grates and doors should be located away from pedestrian spaces (sidewalks and pedestrian paths). e. Electrical Vehicle Charing stations may be placed on a non-primary building façade or as standalone fixtures, however shall have neutral colors, or colors that complement the most adjacent structure to have minimum impact. UDO Combined Draft_v1 – MRB Group 1 (RESERVED FOR TITLE PAGE) UDO Combined Draft_v1 – MRB Group 2 Table of Contents Table of Contents .......................................................................................................................................... 2 Article A: Article Descriptions ...................................................................................................................... 6 Article B: How to use this Code ..................................................................................................................... 9 1.0 Article 1: General Provisions ........................................................................................................... 12 1.1. Title ............................................................................................................................................. 12 1.2. Authority ..................................................................................................................................... 12 1.3. Jurisdiction .................................................................................................................................. 12 1.4. Purpose and Intent ..................................................................................................................... 13 1.5. Consistency With Comprehensive Plan ...................................................................................... 14 1.6. Conformity With All Standards ................................................................................................... 14 1.7. Transitional Provisions ................................................................................................................ 14 1.8. Severability .................................................................................................................................. 15 1.9. Effective Date .............................................................................................................................. 15 2.0 Development Review Bodies .......................................................................................................... 16 2.1. Town Council ............................................................................................................................... 16 2.2. Planning Commission .................................................................................................................. 16 2.3. Board of Zoning Appeals ............................................................................................................. 18 2.4. Architectural Review Board ........................................................................................................ 20 2.5. Building Official ........................................................................................................................... 21 2.6. Planning and Zoning Manager .................................................................................................... 21 2.7. Coordination with Other Governing Bodies ............................................................................... 22 3.0 Zoning Districts and Boundaries ..................................................................................................... 23 3.1. Purpose and Intent ..................................................................................................................... 23 3.2. Official Zoning Map ..................................................................................................................... 23 3.3. Interpretation of District Boundaries .......................................................................................... 26 3.4. Lot Divided by District Boundaries .............................................................................................. 26 3.5. Changes ....................................................................................................................................... 26 3.6. Establishment of Zoning Districts ............................................................................................... 27 Table 3.6.1. Establishment of Zoning Districts .................................................................................... 27 3.7. District Development Standards ................................................................................................. 31 Table 3.7.1: District Dimensional Standards ....................................................................................... 33 3.8. General Lot and Building Standards ............................................................................................ 34 UDO Combined Draft_v1 – MRB Group 3 4.0 Land Use Provisions ........................................................................................................................ 38 4.1. Purpose and Intent ..................................................................................................................... 38 4.2. Applicability ................................................................................................................................. 38 4.3. Table of Permitted Uses .............................................................................................................. 38 Table 4.3.2 – Table of Permitted Uses ................................................................................................ 39 4.4. Conditional Use and Special Exception Standards ...................................................................... 42 4.5. Accessory Uses and Structures ................................................................................................... 55 4.6. Sexually Oriented Businesses ...................................................................................................... 62 4.7. Telecommunication Tower ......................................................................................................... 70 4.8. Temporary Uses .......................................................................................................................... 74 5.0 Land Development Standards ......................................................................................................... 75 5.1. Purpose ....................................................................................................................................... 76 5.2. Applicability ................................................................................................................................. 76 5.3. General Requirements ................................................................................................................ 76 5.4. Open Space ................................................................................................................................. 87 5.5. Alternative Development Patterns ............................................................................................. 94 5.6. Traffic Impact Study .................................................................................................................. 100 6.0 Overlay Design Standards ............................................................................................................. 101 6.1. [Placeholder] ............................................................................................................................. 101 7.0 Landscaping ................................................................................................................................... 102 7.1. Purpose and Intent ................................................................................................................... 102 7.2. Administration .......................................................................................................................... 102 7.3. Landscaping Standards ............................................................................................................. 104 7.4. Parking Landscaping .................................................................................................................. 107 7.5. Perimeter Buffering .................................................................................................................. 108 7.6. Tree Protection and Preservation ............................................................................................. 114 8.0 Parking .......................................................................................................................................... 121 8.1. Purpose and Intent ................................................................................................................... 121 8.2. Applicability ............................................................................................................................... 121 8.3. General Standards ..................................................................................................................... 122 8.4. Minimum Off-Street Parking Requirements ............................................................................. 124 8.5. Design Standards for Parking Lots ............................................................................................ 128 8.6. Pedestrian Access ..................................................................................................................... 131 UDO Combined Draft_v1 – MRB Group 4 8.7. Lighting ...................................................................................................................................... 132 9.0 Signs .............................................................................................................................................. 133 9.1. Purpose and Intent ................................................................................................................... 133 9.2. Applicability ............................................................................................................................... 134 9.3. General Provisions .................................................................................................................... 134 9.4. Freestanding Signs .................................................................................................................... 136 9.5. Attached Signs ........................................................................................................................... 137 9.6. Other Signs that Require a Sign Permit ..................................................................................... 138 9.7. Other Signs ................................................................................................................................ 140 9.8. Violations .................................................................................................................................. 143 10.0 Development Review Procedures ................................................................................................. 144 10.1. Purpose and General Standards ........................................................................................... 144 10.2. Application Procedures ......................................................................................................... 145 10.3. Application Requirements .................................................................................................... 146 10.4. Zoning Permit ........................................................................................................................ 147 10.5. Architectural Review, Minor ................................................................................................. 148 10.6. Architectural Review (Major) ................................................................................................ 150 10.7. Subdivision Review................................................................................................................ 152 10.8. Minor Subdivision ................................................................................................................. 153 10.9. Major Subdivision ................................................................................................................. 154 10.10. Administrative Adjustment ................................................................................................... 157 10.11. Special Exception .................................................................................................................. 159 10.12. Variance ................................................................................................................................ 160 10.13. Administrative Appeals ......................................................................................................... 162 10.14. Amendments and Rezonings ................................................................................................ 163 10.15. Vested Rights and Expiration of Approvals ........................................................................... 166 11.0 Nonconformities ........................................................................................................................... 168 Purpose and Intent ....................................................................................................................... 168 11.1. ...................................................................................................................................................... 168 11.2. Authority to Continue ........................................................................................................... 168 11.3. Determination ....................................................................................................................... 168 11.4. Change of Tenancy or Ownership ......................................................................................... 168 11.5. Minor Repairs and Maintenances ......................................................................................... 168 UDO Combined Draft_v1 – MRB Group 5 11.6. Historic Buildings ................................................................................................................... 168 11.7. Legal Nonconforming Uses ................................................................................................... 169 11.8. Nonconforming Lots of Record ............................................................................................. 170 11.9. Nonconforming Structures ................................................................................................... 170 11.10. Nonconforming Signs ............................................................................................................ 171 11.11. Nonconforming Site Features ............................................................................................... 171 12.0 Violations and Enforcement ......................................................................................................... 173 12.1. Violations Generally .............................................................................................................. 173 12.2. Enforcement.......................................................................................................................... 173 Appendix ................................................................................................................................................... 176 13.0 Definitions ..................................................................................................................................... 176 14.0 Town of Chapin Tree List ............................................................................................................... 201 15.0 Approved Color Palette ................................................................................................................. 201 16.0 Unified Development Review Permit and Fee Schedule .............................................................. 201 UDO Combined Draft_v1 – MRB Group 6 Article A: Article Descriptions Article B: How to Use This Code A “how to use this code” section lays out a general process of how readers should use the document by outlining common examples seen at the administrative level of planning. Examples such as expanded an existing use, starting a business, subdividing a property, or submitting a text amendment are summarized in this section to give the reader a basic understand of procedure. Article C: Table of Contents A table of contents is a section that provides a guide to the organization and structure of a document. The table of contents lists the titles, sections, and subsections in the order in which they appear within this Unified Development Ordinance (UDO). Article 1: General Provisions As this Unified Development Ordinance (UDO) pertains to all properties within the municipal boundary, and that the Town has the authority to enforce its own code within the Town limits, this section details the “big picture” of zoning and land use regulations. Additionally, this section describes the intent of the code, to have regulations that result in quality development, and establishment of responsible planning; all while maintaining the vision of the Community and the Town of Chapin Comprehensive Plan. These regulations are not meant or intended to conflict with higher regulatory bodies such as State or Federal laws. Please note, there is a subsection which outlines the procedure for previously approved applications under the former code, and explains that uses or structures that do not comply with this code are considered legal nonconforming uses and structures. Article 2: Decision Making Bodies This section describes all decision-making entities and persons within the Town that have powers, duties, and responsibilities to uphold the regulations within this document. For each decision-making body or person, there are regulations that dictate the composition, powers, duties, appointment procedure, and term of office for the applicable review body. Additionally, this section shall give the Administrator of the UDO and/or the Town Planning and Zoning Manager, full power and autonomy within the limits of this document and legal authority, to enforce, interpret, and process applications relevant to the physical development and use of land within the Town. Article 3: Zoning Map and Districts The core of Planning for any jurisdiction is the division of Land Uses by the implementation of zoning regulations. Land use categories are segregated according to their operational and physical characteristics. Each Zoning District that the Town has defined and/or identified is described within this section. The district definitions are supplemented by descriptions of the intent of each Zoning District to ensure that development within the respective district conforms to the unique character of each Zoning District, regardless of residential, commercial, institutional, or industrial in nature. This section will also briefly describe the general lot and building standards applicable to this section. It will indicate how lot(s) shall be accessed by vehicles and Utilities, illustrate or dictate road frontage dimensional standards, discuss geometrical shapes and layout of property or lot(s), and describe the minimal property or lot size that may be developed. UDO Combined Draft_v1 – MRB Group 7 Article 4: Land Use Provisions The previous section establishes the various Zoning Districts within the Town. This section will detail the Land Use Provisions specific to each Zoning District and provide a Table of Permitted Uses within in the section that will list all defined land uses permitted within the Town and provide details for its use. The nomenclature and categories are as follows: • Permitted (P), within the applicable Zoning District • Conditional (C), with additional standards or requirements based on end use • Special Exception (SE), granted by the Board of Zoning Appeals • Permitted in Existing Buildings Only (E) • Blank (-) cell indicates the use is not permitted within the zoning district. If the Permitted Use Table indicates a desired use is allowed only with Conditional (C) or by Special Exception (SE), the user will find details in the subsequent sections regarding additional specific standards requiring compliance prior to approval. These standards may or may not, but are not limited to, the appearance, operation, or location of use. In addition to the Permitted Use Table, the UDO recognizes uses and structures that are an accessory to the principal use. An example of an accessory use is a residential garage, backyard chicken coop, home- based business, or a drive-thru window at a bank or restaurant. The Accessory Use Table details in what zoning district these accessory uses and structures are permitted, and applicable regulations for each type of accessory use and structure. Article 5: Land Development Standards This section specifies the improvements required for a development site, including but not limited to, underground utilities, connection(s) to public utilities, street design requirements, streetscape requirements, provisions for driveways, open space allotment(s), and regulations for subdivision conservation. The/ These infrastructure and site requirements are typically prompted when a development is proposed, such as a new residential subdivision, multi-family complex, commercial building, or commercial shopping center. Article 6: Architectural Review/Design Standards The Town of Chapin has three (3) architectural Overlay Districts; the Town Center, Boulevard, and Gateway. An Overlay District is an additional District which is applied over one or more previously established Zoning Districts, establishing additional or stricter standard(s) and/ or criteria for applicable properties, in addition to those of the underlying zoning district. The regulations crafted for each Overlay District(s) are unique to each district and dictate how each is to retain and perpetuate the unique characteristics of that Overlay District. For example, the purpose of the Town Center Overlay District is to have buildings that have a walkable relationship to the street, facilitate a mixture of uses, and encourage the development of environments that individuals can “live, work, and play.” Article 7: Tree Preservation, Buffers, and Landscaping A tree preservation, buffer, and landscaping section is a set of regulations, guidelines, and policies that aim to protect trees, vegetation, and natural areas within a community. This section aims to ensure that the development, construction, and landscaping activities in the area are in harmony with the natural UDO Combined Draft_v1 – MRB Group 8 environment and the community's aesthetic values. This includes protecting trees from damage during construction projects, requiring permits for tree removal, and implementing measures to protect trees during maintenance activities. The buffer aspect of this section requires creating a buffer zone between natural areas and development areas. This buffer zone serves as a transition area between the two areas and helps to minimize the impact of development on the natural environment. Landscaping requirements may require property owners to design and maintain their landscape in a way that complements the natural environment. This includes planting native plants, trees, and vegetation that are suitable for the local climate and soil conditions. Article 8: Parking and Lighting Standards The purpose of parking and lighting regulations is to ensure safe and efficient use of parking spaces and lighting within a community. This section outlines rules for parking lot design, interior landscaping, number of parking spaces required, as well as requirements for lighting levels, placement, and maintenance. The goal of these parking and lighting regulations is to promote public safety, reduce traffic congestion, and enhance the overall aesthetic of the community. Article 9: Signs The primary form of physical advertisement for businesses, institutions, and other uses is by on-premise signage. Characteristics, such as design and scale, of signage have an overall impact on the aesthetic of the community. On-premise signage is contained within the property of the use, and is either attached to the primary building or a free-standing sign supported by a small structure. This section regulates the number, size, location, materials, and content of signs. These sign standards have been carefully crafted to allow uses to have visibility to vehicular and pedestrian traffic, but also to prevent the proliferation of signs that could pose a traffic hazard, not to mention the negative aesthetic effects of sign pollution. Article 10: Development Review Procedures This section compiles all development review procedures referenced within this code. Various approvals require decisions by Town Staff and/or other Decision-Making Entity/ Body/ Person(s) that may require additional review(s). Other sections may reference to this section to inform the reader as to what kind of approval is required. Each development review procedure details the application requirements, review procedure, and appeal procedure, if necessary. This article details the vested rights and regulations adopted by the Town. Article 11: Nonconformities This code recognizes that there are existing legal nonconformities and that there will be additional legal nonconformities created with this code. A nonconformity is a feature regarding a property (land use, structure, setback, parking, landscaping, building material, sign, etc.) that currently does not comply with the requirements of this code. The adoption of this code does not insinuate or imply that the Town will retroactively attempt to correct every nonconforming feature and/or property(ies) within the Town. This section is intended to regulate when nonconforming properties are improved, expanded, and/or cease operations conducted prior to the adoption of this code. Article 12: Violations and Enforcement UDO Combined Draft_v1 – MRB Group 9 A zoning violation is characterized as a property that does not meet the minimum regulation as governed within this UDO. The most common zoning violations can be characterized as inoperable vehicles, off-premise signs, and operating a use that is not permitted in a specific Zoning District. If violations are cited and are not corrected and/or attempts to correct are not completed in a timely manner, such violations may result in a fine or misdemeanor charge. Appendices The Appendix section of this document is for supplementary documentation to this Ordinance. You will find the list of defined terms used in this ordinance, the Town of Chapin’s Approved Tree Species List, the approved color palette, and applicable fee schedule. The relevant section will indicate the use of these appendices, such as when tree species are proposed during a development project, and/or a building is under review by the Town. Article B: How to use this Code The Town of Chapin Unified Development Ordinance (UDO) is a compilation and library of rules and regulations that govern how Real Property and/or Land can be used in a particular area. Using this UDO requires careful review of the regulations and requirements for any improvement. It is important to follow the process and obtain any necessary approvals to ensure compliance with local zoning laws. Below are steps that should be followed prior to consideration of a development application: 1. Identify the appropriate Zoning District: The first step in using a UDO is to determine the Zoning District of the property you are interested in. The Zoning District is typically illustrated on a zoning map, which is available from your local government or planning department. 2. Examine the Permitted Uses: Once you have determined the appropriate Zoning District and examined the Permitted Uses for that District, the UDO will attempt to provide a complete list of allowable uses for that Zoning District such as residential, commercial, or industrial. Make sure the intended use of the property is allowed in that zoning district. 3. Acknowledge and comply with special requirements: Various Zoning Districts may dictate special requirements, such as minimum lot size, setbacks from property lines, or maximum building height(s). Make sure to review these requirements to ensure compliance. 4. Identify and Review Zoning Variances or Special Permits: If the intended use of a property is not allowed and/or permitted in a specific Zoning District, it may be possible to obtain a variance or special permit. These are typically characterized as exceptions to the UDO and allow certain uses under certain conditions. Applicants will be required to review all requirements for obtaining a Variance or Special Permit prior to application submission. 5. Application Submission: Applicants will submit an application to their local government or planning department and will briefly describe the intended use of what is being applied for, UDO Combined Draft_v1 – MRB Group 10 plans or improvements to be made on the property, and remit payment for associated fees. If a Variance or Special Permit is required, additional application documents may be required. 6. Public Hearing Attendance: Contingent upon what has been applied for and/or due to a request for Zoning Variance or Special Exception, Applicants may be required to attend Public Hearings established by the appropriate Decision-Making Entity or Commission. Public hearing attendance will serve as an opportunity for Applicants to present their application request and will facilitate an opportunity to provide responses to questions derived from the applicable decision-making body. 7. Obtain approval: Once an application has been reviewed, and any or all necessary or required hearings have been held, a decision will be rendered. If approved, an applicant will then be authorized to use or improve the property for the applied purpose. If denied, applicants are advised and encouraged to consider minor and/ or substantive revisions to their application, planned use, and/or planned improvement(s) or to simply seek alternative options. SPECIFIC APPLICATION INFORMATION A. IF YOU WANT TO SUBDIVIDE YOUR PROPERTY 1. Find your zoning district and any overlay districts by looking at the Official Zoning Map 2. Determine the development standards — minimum lot sizes, setbacks, etc. — as described in Article 3. 3. Determine approved uses, and any conditions and special exceptions that may apply — Article 4. 4. Determine the subdivision and infrastructure standards for the proposed development of the property - Article 5. 5. Determine the process for moving forward, as described in development review procedures – Article 10. B. IF YOU ARE OPENING A BUSINESS 1. Find your zoning district and any overlay districts by looking at the Official Zoning Map. 2. Determine approved uses, and any conditions and special exceptions that may apply — Article 4. 3. Contact the Planning Department for a zoning permit. 4. Contact Lexington County for building inspections. 5. Apply for a Sign Permit and Business License at the Town of Chapin. C. IF YOU WANT TO CHANGE YOUR ZONING DISTRICT A rezoning application must be submitted to the Zoning Administrator. The application must go to the Planning Commission for a recommendation prior to being reviewed and determined by UDO Combined Draft_v1 – MRB Group 11 Town Council. See Article development review procedures for application requirements and criteria for rezoning requests. D. IF YOU WANT TO CHANGE THE TEXT IN THIS DOCUMENT Any citizen of the Town can initiate a code change to this document. Other entities, such as the Planning Commission and Town Council also share the power to initiate a code change, or formally known as a text amendment. A text amendment is initiated by submitting an application to the Administrator (Planning and Zoning Manager) Code Formatting 1. Level 1 – Chapter 1.1. Level 2 1.1.1. Level 3 a. Level 4 (1.1.1.a) 1. Level 5 (1.1.1.a.1) a. Level 6 (1.1.1.a.1.a) i. Level 7 (1.1.1.a.1.a.i) UDO Combined Draft_v1 – MRB Group 12 1.0 Article 1: General Provisions 1.1. Title 1.1.1. This document is to be known as the “Town of Chapin Unified Zoning & Development Ordinance (UDO).” It should be read in conjunction with the official zoning map noted in Section 3.2. 1.2. Authority 1.2.1. The development regulations contained in the UDO have been adopted pursuant to the authority conferred by the South Carolina Local Government Comprehensive Planning Enabling Act of 1994, S.C. Code 1976, § 6-29-310 et seq. 1.2.2. The enumeration of these sections of the General Statutes is not intended to exclude any other section of the General Statutes which grants or confirms authority to municipalities to promulgate ordinances, rules, or regulations similar or identical to those set forth in the Unified Development Ordinance. 1.3. Jurisdiction 1.3.1. Pursuant to the general health, safety and welfare of the community, the articles and sections of the UDO apply as relevant to all development within the corporate limits of Chapin in their current form and in all future extensions and configurations as shown on the official zoning map and its periodic updates. 1.3.2. Conflicting Provisions a. Whenever the requirements made under authority of these regulations impose stricter standards than are required in any other statute or local ordinance or regulation, the provisions of this Code shall govern. Whenever the provisions of any other statute or local ordinance or regulation impose stricter standards than are required by this Code, the provisions of such statute or local ordinance or regulations shall apply. b. Conflict with Covenants 1. The Town does not enforce private covenants; however, the Town may require approval from formalized neighborhood associations before projects are approved. When there is a dispute as to the interpretation UDO Combined Draft_v1 – MRB Group 13 of covenants, the Town reserves the right to issue permits that are otherwise in compliance with this Code. Whenever the requirements of formally adopted covenants impose stricter standards than the provisions of this Code, the covenants shall govern. This code does not alleviate an applicant’s responsibility to conform with restrictive covenants. The Town may delay an application when it is understood that a covenant exists for the property in question. However, in case of a conflict in which this Code is stricter than the covenants, this Code shall govern. 2. Per Section 6-29-1145. (B) of South Carolina law, the Town shall not issue a permit if the request or activity is expressly prohibited in recorded covenants 1.4. Purpose and Intent 1.4.1. In accordance with SCCL Section 6-29-710, this Code is adopted for the general purposes of guiding development in accordance with existing and future needs and promoting the public health, safety, convenience, order, appearance, prosperity, and general welfare. To these ends, this Code is adopted with reasonable consideration of the following purposes, where applicable: a. To provide for adequate light, air, and open space b. To facilitate the creation of a convenient, attractive, and harmonious community c. To protect and preserve scenic, historic, or ecologically sensitive areas d. To facilitate the adequate provision or availability of transportation, police and fire protection, water, sewage, schools, parks, and other recreational facilities, affordable housing, disaster evacuation, and other public services and requirements e. To secure safety from fire, flood, and other dangers f. To further the public welfare in any other regard specified by a local governing body Specifically, the regulations contained in the UDO and other relevant adopted plans and policies are designed to implement the following planning principles: g. Embrace the Greater Chapin Community while preserving cultural heritage and small-town feel h. Work with regional partners to facilitate well-planned growth i. Protect scenic and critical natural resources including areas surrounding Lake Murray j. Enhance transportation infrastructure by promoting connectivity k. Preserve and create open spaces for public gathering and enjoyment l. Develop and enhance the Town Center as a central gathering place UDO Combined Draft_v1 – MRB Group 14 m. Expand the availability of quality housing options n. Promote the local economy o. Enhance quality of life through quality design 1.5. Consistency With Comprehensive Plan 1.5.1. IMPLEMENTATION OF ADOPTED PLANS AND POLICIES In accordance with S.C. Code 1976, § 6-29-310 et seq., the UDO is intended to implement the various development-related plans and policies adopted by the Town Council. As such, all development plans submitted shall be in conformance with the Comprehensive Plan and other plans and policies adopted by the Town. 1.6. Conformity With All Standards 1.6.1. No land, structure or parts thereof shall be used, occupied, constructed, erected, altered or moved, unless in conformity with all of the regulations herein specified for the zoning district in which it is located, and with all other applicable local, state and federal laws. 1.7. Transitional Provisions 1.7.1. Existing Buildings a. Existing buildings and appurtenances that do not conform to the provisions of the UDO at the time of its adoption may continue in use as they are until a substantial improvement is requested, at which time the Administrator shall determine the provisions of the UDO that shall apply to achieve the highest degree of conformity subject to practical limitations. Such changes shall be subject to the provisions of Article 11, Nonconformities. b. The modification of existing buildings is permitted subject to approval by the Administrator if such changes result in greater conformance with the specifications of the UDO 1.7.2. Development Subject to a Planned Development (PD) or Development Agreement a. Any application that has received approval for a PD district and/or development agreement before the effective date of the UDO or any amendment thereto may be carried out in accordance with the master plan for the PD and its terms and conditions of approval, and the terms and conditions of the development agreement, provided the PD and development agreement does not expire and otherwise remains valid. If the PD approval or development agreement expires, is revoked (e.g., for failure to comply with time limits or the terms and conditions of approval), or otherwise becomes invalid, any subsequent development of the site shall be subject to the procedures and standards of the UDO. 1.7.3. Other Approved Development Permits and Approvals UDO Combined Draft_v1 – MRB Group 15 a. Any other development that has received approval of a development permit or similar approval before the effective date of this chapter or any amendment thereto may be carried out in accordance with the terms and conditions of the development permit or approval and the procedures and standards in effect at the time of approval, provided the permit or approval does not expire and otherwise remains valid. If the development permit or approval expires, is revoked (e.g., for failure to comply with time limits or the terms and conditions), or otherwise becomes invalid, any subsequent development of the site shall be subject to the procedures and standards of the UDO. b. Pending Applications Any development application submitted and accepted as complete before the effective date of this Ordinance, but still pending final action as of that date, shall be reviewed and decided, in accordance with the regulations in effect when the application was accepted, provided that the permit or approval does not expire, is revoked, or otherwise becomes invalid. 1.7.4. Photographs and Drawings Photographs and drawings in this ordinance are for illustrative purposes only and shall not be considered as part of the text of this ordinance. 1.8. Severability In the event of any portion of the UDO being declared unconstitutional or invalid, such decision does not affect the remainder of the ordinance. 1.9. Effective Date The date of adoption of this Unified Development Ordinance is recorded as of [DATE OF ADOPTION]. UDO Combined Draft_v1 – MRB Group 16 2.0 Development Review Bodies 2.1. Town Council 2.1.1. Powers and Duties a. Comprehensive Plan Amendments: To initiate, modify, and adopt a Comprehensive Plan after receiving recommendations from the Planning Commission. b. Text Amendments: The Town Council shall entertain and approve, approve with conditions, or deny proposed text amendments to this Ordinance. c. Map Amendments: The Town Council shall entertain and approve, approve with conditions, or deny proposed amendments to the Official Zoning Map. d. Appointments: The Town Council shall appoint members to the Planning Commission (PC), Board of Zoning Appeals (BZA), and Architectural Review Board (ARB). e. Development Improvements: Upon approval of a final plat, when applicable, the Town Council shall determine the acceptance or non- acceptance of all dedicated streets, easements, rights-of-way, public parks, and other public lands as shown on the plat. f. Annexations: The Town Council shall review and act on all annexations and have final authority on the zoning designation of the annexed parcel(s). 2.2. Planning Commission 2.2.1. Powers and Duties a. Authority: Pursuant to S.C. Code 1976, § 6-29, et seq., as amended, there is hereby established a Planning Commission, referred to herein as the PC, for the Town, which shall perform all planning functions in the areas of jurisdictional control for the Town of Chapin. b. Territorial Jurisdiction: The PC may exercise the power set forth in Title 6, Chapter 29 of the South Carolina Code of Laws, as amended, within the municipal boundary in the Town of Chapin. c. Specific Planning Activities: The PC has a duty to engage in a continuing planning program for the physical, social and economic growth, development and redevelopment of the Town of Chapin. The Chapin Town Council designates to the Planning Commission the following duties: UDO Combined Draft_v1 – MRB Group 17 1. Prepare and recommend revisions to the Comprehensive Plan to Town Council for adoption. 2. Review and provide recommendations regarding public projects. 3. Review and approve, approve with conditions, or deny all applicable subdivision applications. 4. Site Plan (Preliminary Plat) and Final Subdivision Plat review and approval in coordination with the Administrator. 5. Review and provide recommendations to the Town Council regarding amendments to the text of this Ordinance. 6. Review and provide recommendations to the Town Council regarding amendments to the Official Zoning Map 7. Review and provide recommendations to the Town Council regarding Annexations. 2.2.2. Membership, Terms, and Compensation a. Number: All commission members shall be appointed by the Mayor and Town Council. The Planning Commission shall consist of five (5) members. b. Appointment: Planning Commissioners shall reside within the Town of Chapin, Lexington County, or surrounding area. Members shall serve until their successors are deemed qualified and appointed, and shall meet all the requirements for appointment as outlined within the Town of Chapin’s ordinances and per applicable State Law. No member of the Planning Commission shall be the holder of an Elected Public Office of the Town. All appointed members of the Planning Commission shall have demonstrated independent judgment and shall be able to prepare for and attend board meetings. c. Terms: All terms shall be for three (3) years and shall be staggered with no more than two commissioners with the same term period, unless otherwise noted. All terms shall expire on December 31st of the applicable calendar year. d. Vacancies: A vacancy, for any reason, shall be filled for the unexpired term. e. Removal: The Town Council may remove any town-appointed member of the PC for cause by majority vote of the Council. f. Compensation: Any and/or All members shall serve without pay. Members may be reimbursed for actual expenses incurred in the performance of their duties from available funds approved in advance by the Administrator. 2.2.3. Officers, Meetings, and Quorum a. Officers: Pursuant to State Statue § 6-29of the South Carolina Code of Laws, 1976, as amended, shall organize a local Planning Commission. The Planning Commission shall elect a chairperson and a vice-chairperson from its members who shall serve a one (1) calendar year appointment or until re-elected; or until a successor is elected. UDO Combined Draft_v1 – MRB Group 18 b. Meetings: Meetings of the Planning Commission shall be convened each month within a calendar year, at the request of the Chairperson, and/or at such other times as the majority of the Planning Commission Members or Town Officials may determine. All meetings of the Planning Commission shall be open to the public. c. Quorum: A majority of the members appointed shall constitute a quorum. d. Rules of Proceeding: 1. The Planning Commission shall adopt rules of organizational procedure (Robert's Rules of Order). a. The PC shall adopt and retain bylaws and rules of procedure. 2. Commissioners that may have a conflict of interest, either perceived or proven through the SC Ethics Commission, shall abstain from voting on the matter that is causing the conflict. 3. In the case of an abstention where there is no conflict of interest, an abstention from voting shall be considered a vote to approve the motion. e. Minutes: The Planning Commission shall keep a publicly accessible record of its resolutions, findings, determinations, and minutes of its proceedings, illustrating the vote of each member upon each question, or indicating absence or failure to vote. f. Staff: The Planning Commission shall work with Town Officials for all applicable projects within the Town. 2.3. Board of Zoning Appeals 2.3.1. Powers and Duties a. Authority: The Board of Zoning Appeals (BZA) is hereby established, pursuant to the authority of § 6-29, et seq., of the South Carolina Code of Laws, as amended, and shall hereafter be referred to as the BZA. b. Territorial Jurisdiction: The BZA may exercise the power set forth in Title 6, Chapter 29 of the South Carolina Code of Laws, as amended, within the municipal boundary in the Town of Chapin. The Town Council may expand the jurisdiction of the BZA by ordinance and/or intergovernmental agreement, in accordance with the provisions of § 6-29of the South Carolina Code of Laws. c. Appeals: The BZA shall entertain and determine appropriate appeals action where it is alleged there is an error in an order, requirement, decision, or determination made by an Administrative Official in the enforcement of this Code. d. Variances: The BZA shall hear and decide requests for Variance from the requirements of this Code when strict application of the provisions of the Ordinance would result in unnecessary hardship. e. Special Exception: The BZA shall permit uses by Special Exception subject to the terms and conditions set forth for such uses in this Ordinance. UDO Combined Draft_v1 – MRB Group 19 2.3.2. Membership, Terms, and Compensation a. Appointment: All BZA members shall be appointed by the Mayor and Town Council. The BZA shall consist of five (5) members The BZA Commissioners shall reside within the Town of Chapin, Lexington County, or surrounding area. Members shall serve until their successors are deemed qualified and appointed, and shall meet all the requirements for appointment as outlined within the Town of Chapin’s ordinances and per applicable State Law. No member of the BZA shall be the holder of an Elected Public Office of the Town. All appointed members of the BZA shall have demonstrated independent judgment and shall be able to prepare for and attend board meetings. b. Terms: All terms shall be for three (3) years and shall be staggered with no more than two commissioners with the same term period. All terms shall end on December 31st of the applicable calendar year, and members must continue to serve until their successors are appointed. c. Vacancies: Any vacancy in the membership shall be filled for the unexpired term in the same manner as the initial appointment. d. Removal: The Town Council may remove any member of the BZA for cause. e. Compensation: Members shall serve without pay. Members may be reimbursed for actual expenses incurred in the performance of their duties from available funds approved in advance by the Administrator. 2.3.3. Officers, Meetings, and Quorum a. Officers: The BZA shall elect a chairperson and a vice-chairperson from its members who shall serve a one (1) calendar year appointment or until re- elected; or until a successor is elected. b. Meetings: Meetings of the BZA shall be held at the request of the chairperson, by a majority of the BZA, and at such other times as the BZA may determine. All meetings of the BZA shall be open to the public. c. Quorum: A majority of the members appointed shall constitute a quorum. d. Witnesses: The chairperson, or in his or her absence, the vice-chairperson, may administer oaths and compel the attendance of witnesses by subpoena. e. Rules of Proceeding 1. The BZA shall adopt rules of organizational procedure (Robert's Rules of Order).. a. The BZA shall retain and adopt bylaws. 2. Commissioners that may have a conflict of interest, either perceived or proven through the SC Ethics Commission, shall abstain from voting on the matter that is causing the conflict. 3. In the case of an abstention where there is no conflict of interest, an abstention from voting shall be considered a vote to approve the motion. UDO Combined Draft_v1 – MRB Group 20 f. Decisions: The concurring vote of three (3) members of the BZA shall be necessary to: reverse any order, requirement, decision, or determination of the Administrator or Building Official, or to determine in favor of an applicant on any matter upon which it is required to pass judgement, or to affect any variation of this Code. On all appeals, applications and matters brought before the BZA, the BZA shall inform in writing all Parties involved of its decisions and the resolutions, findings, or determinations thereof. g. Contempt Penalty: In case of contempt by a Party, Witness, or other person before the BZA, it may certify the action to the Circuit Court, and the Judge of the Court, in open Court or in chambers; after hearing, may impose a penalty as authorized by Law. h. Minutes: The BZA shall keep a record of its findings, determinations, and minutes of its proceedings, illustrating the vote of each member upon each question, or indicating absence or failure to vote. The Board shall keep records of its examinations and other Official Actions, all of which shall be immediately filed in the Office of the Zoning Administrator and shall be a public record i. Staff: The BZA shall work with the Zoning Administrator for all projects within the Town. 2.4. Architectural Review Board 2.4.1. Powers and Duties a. Territorial Jurisdiction: The Architectural Review Board, referred to herein as the ARB, shall perform all functions defined herein within the area of jurisdictional control within the Town of Chapin. b. Powers and Duties: Review, approve, or deny, all applications subject to Major Architectural Review as outlined in Section 10.6. 2.4.2. Membership, Terms, and Compensation a. Appointment: Members of the ARB shall be appointed by the Town Council The ARB shall consist of five (5) members appointed by Town Council. Four (4) of the five (5) Board members must have professional backgrounds related to this field, with one representative of each of the following professions sitting on the Board: registered architect, real estate professional, engineer or member of the building trades, and a Chapin business owner. The fifth seat is open to members of the general public. b. Terms: All terms shall be for three (3) years and shall be staggered with no more than two commissioners with the same term period. All terms shall expire on December 31st of the applicable calendar year and members must continue to serve until their successors are appointed. c. Officers: The ARB shall elect a chairperson and a vice-chairperson from its members who shall serve a one (1) calendar year appointment or until re- elected; or until a successor is elected d. Rules of Proceeding: UDO Combined Draft_v1 – MRB Group 21 1. The ARB shall adopt rules of organizational procedure (Robert's Rules of Order). a. The ARB shall adopt and retain bylaws and rules of procedure. 2. Board members that may have a conflict of interest, either perceived or proven through the SC Ethics Commission, shall abstain from voting on the matter that is causing the conflict. 3. In the case of an abstention where there is no conflict of interest, an abstention from voting shall be considered a vote to approve the motion e. Vacancies: Any vacancy in the membership shall be filled for the unexpired term in the same manner as the initial appointment. f. Removal: The Town Council may remove any member of the ARB for cause. 2.4.3. Compensation: Members shall serve without pay. Members may be reimbursed for actual expenses incurred in the performance of their duties from available funds approved in advance by the Administrator. 2.5. Building Official 2.5.1. Designation Lexington County shall designate and empower the Building Official. 2.5.2. Powers and Duties a. Responsibility: The Building Official shall be responsible for all duties specified in Section 14-241 of the Lexington Code of Ordinances. b. Powers and Duties: The Building Official shall follow the powers and duties within Section 14-241 and other applicable code sections. 2.5.3. Appeals Appeals for decisions made by the Building Official shall be reviewed by the Lexington County Community Development Building Codes Board of Appeals, in accordance with Section 14-412 of the Code of Ordinances for Lexington County. 2.6. Planning and Zoning Manager 2.6.1. Designation The Planning and Zoning Manager will be referred to as the “Zoning Administrator” within this Ordinance. The Zoning Administrator shall be defined as any person or persons designated by the Town to fulfill the duties herein. 2.6.2. Powers and Duties The Zoning Administrator shall: a. Administer and enforce the provisions of this Ordinance b. Make written interpretations of this Ordinance UDO Combined Draft_v1 – MRB Group 22 c. Review and make recommendations on Project Permits where the Building Official has authority d. Review and process Zoning Permits e. Review and process Certificates of Zoning Compliance f. Review and make recommendations on Certificates of Occupancy g. Process applications for Variances and Special Exceptions h. Issue all permits, exception for Project Permits where the Building Official has authority i. Review and act on Administrative Adjustments j. Review and act on Minor Development Design Review applications k. Review and make recommendations to the Architectural Review Board on Major Development Design Review applications l. Review and make recommendations on preliminary plats, site plans, and final plats 2.7. Coordination with Other Governing Bodies 2.7.1. General: Approvals granted by the Town of Chapin are contingent upon the approval, authorization, permit, or acceptance required of the proposal by any other organization or agency. A copy of the required approval, authorization, permit, or acceptance must be submitted to the Administrator, prior to approval of the construction plans, issuance of a final plat approval, or issuance of a Building Permit. UDO Combined Draft_v1 – MRB Group 23 3.0 Zoning Districts and Boundaries 3.1. Purpose and Intent For the purposes of this Ordinance, the various districts have been categorized as Zoning Districts. Each district is established as a specific and exclusive zoning district, and only those uses that are listed as permitted are allowed. If a particular use of the land is not mentioned for a certain district, that use shall be prohibited for that district unless the change is by official amendment approved by Town Council. 3.2. Official Zoning Map The Official Zoning Map shall be maintained in the Office of the Administrator. A duplicate official Zoning Map shall be kept in the office of the Town Clerk. All zoning district boundaries shall be clearly shown on the Zoning Map, and amendments shall be recorded immediately after adoption. The official copies of the Zoning Map shall be dated and attested by the Town Clerk, and shall be available for public inspection. The official Zoning Map and any amendments adopted by Town Council shall constitute the final authority for determination of zoning district boundaries. It shall be unlawful for any person to make unauthorized changes to the Zoning Map. UDO Combined Draft_v1 – MRB Group 24 UDO Combined Draft_v1 – MRB Group 25 UDO Combined Draft_v1 – MRB Group 26 3.3. Interpretation of District Boundaries When there is any uncertainty as to the intended locations of any zoning district boundary on the Zoning Map, the Town Staff shall make an interpretation of such map upon request of any person. Any person aggrieved by any such interpretation may appeal such interpretation to the Board of Zoning Appeals (BZA). The Town Staff, and the BZA, in interpreting the Zoning Map or deciding any appeal shall apply the following standards: 3.3.1. Boundaries indicated as approximately following the centerlines of streets, highways or alleys shall be construed as following such centerlines: 3.3.2. Boundaries indicated as approximately following platted lot lines shall be construed as following such lot lines; 3.3.3. Boundaries indicated as approximately following political boundaries shall be construed as following such boundaries; 3.3.4. Boundaries indicated as following railroad lines shall be construed to be midway between the main tracks or to follow the centerline of single tracks; 3.3.5. Boundaries indicated as following the centerlines of waterways, marshes or ditches shall be construed as following such lines; 3.3.6. Boundaries indicated as parallel to or extensions of features shall be so construed. Distances not specifically indicated on the Official Zoning Map shall be determined by the scale of the map; and 3.3.7. Where physical or cultural features existing on the ground are at variance with those shown on the Official Zoning Map, or in other circumstances not covered by this section, the Board of Zoning Appeals shall interpret the district boundaries. 3.4. Lot Divided by District Boundaries No structure or accessory use may be placed, structurally altered, or have a change in use where the structure or use is or would be included within two or more zoning districts unless such structure or use conforms to the requirements of all applicable district regulations. 3.5. Changes 3.5.1. Changes made to zone boundaries or other matters portrayed on the Zoning Map shall be made in accordance with Article 10, Amendments and Rezonings. 3.5.2. The Administrator shall enter changes onto the Zoning Map within a reasonable period of time after a map amendment is approved by the Town Council. Where the ordinance enacting a zone boundary change contains wording explaining or clarifying the location of the new boundary, the Administrator may enter notations on the Zoning Map reflecting the ordinance wording. 3.5.3. No changes of any nature shall be made to the Zoning Map or matter shown thereon except in conformity with the procedures set forth in this Ordinance. Any unauthorized change of whatever kind by any person or persons shall be considered a violation of this Ordinance and punishable as provided by law. UDO Combined Draft_v1 – MRB Group 27 3.5.4. Regardless of the existence of purported copies of the Zoning Map that may from time to time be made or published, the Zoning Map which shall be located in the Department of Planning, shall be the final authority as to the current zoning status of land and water areas, buildings, and other structures in the Town, except in the case of proven errors. 3.5.5. The Administrator shall maintain copies of superseded versions of the Zoning Map for historical reference. 3.5.6. Where Town limit boundaries change by virtue of annexation or some other means, the following provisions shall apply: a. Areas to be annexed into the incorporated limits of Chapin shall be assigned zoning classifications by the Town Council. b. In all cases where additions to the Town’s total area require adjustments in the zoning district boundaries, the adjustment shall be made to the Zoning Map. c. When reductions are made in the Town’s total incorporated area the provisions of this Ordinance shall no longer apply to that area. 3.6. Establishment of Zoning Districts 3.6.1. The following zoning districts are hereby established: Table 3.6.1. Establishment of Zoning Districts Description Illustration (RA) Rural Agricultural District: The intent of the RA district is to establish and preserve areas primarily for agriculture and rural dwellings, conservation subdivisions, forest management and various other very low density uses on large sites, and to encourage preservation of natural resources and guard against the premature or unreasonable alteration of land resources. This district may be utilized for areas annexed by the Town to preserve the existing rural characteristics, and to prevent urban sprawl. RR, Rural Residential District: RR districts are intended to limit high density development, encourage low-impact developments such as conservation subdivisions, and to protect natural and agricultural areas by limiting and regulating commercial development. UDO Combined Draft_v1 – MRB Group 28 SR1, Suburban Residential District 1: SR1 districts are intended to be single family residential areas with detached units and low population densities. Conservation subdivisions are permitted as a conditional use. SR2, Suburban Family Residential District 2: SR2 districts are intended to be single family residential areas with detached units and low population densities. Conservation subdivisions are permitted as a conditional use. SR3, Suburban Family Residential District 3: SFR3 districts are intended to be the medium density single family residential areas with detached units. Conservation subdivisions are permitted as a conditional use. TR1, Town Residential District 1: TFR districts are intended for medium density residential purposes, including single family detached units, duplexes, and triplexes. These uses shall be compatible in size and scale with surrounding residential development. UDO Combined Draft_v1 – MRB Group 29 TR2, Town Residential District 2: The purpose of this district is to provide for a mixture of single-family, two-family, triplexes, and other residential uses, except multifamily, on smaller lots with a variety of setbacks as well as the location of higher density dwellings such as zero lot line homes and rowhome developments. TR3, Town Residential District 3: The purpose of the TR3 district is to establish and preserve multifamily residential uses designed to encourage and continue a stable and healthy environment for residential uses and to exclude uses which are not compatible with such residential uses. VC, Village Commercial District: VC districts are intended for commercial and service uses oriented primarily to serving needs of persons who live or work in nearby areas. A variety of mixed-density residential uses are permitted when paired with commercial uses. TC, Town Center District: The intent of the Town Center (TC) zoning district is to provide an area for development of an attractive, compact, walkable, mixed- use town center that creates a live/work/play environment for the community. Denser residential uses are permitted when paired with commercial uses PI, Public/Institutional District: The PI district supports generally non-residential institutions and employment areas that are designed in a campus-like setting, such as hospitals, universities, research facilities, and offices. It is intended to ensure that these unique institutions are designed to be compatible with their surroundings and the rest of the Town. UDO Combined Draft_v1 – MRB Group 30 CC, Corridor Commercial: It is the intent of this section that the CC zoning district be developed and reserved primarily as a retail service and commercial area, serving surrounding neighborhoods and larger community or town- wide clientele with a wide range of commercial services, including retail, offices and business support services located in areas which are well served by collector and arterial street facilities as well as pedestrian access facilities where appropriate. IC, Interstate Commercial District: IC districts are intended to provided businesses that serve the traveling public along I-26 such as restaurants, gas stations and hotels/motels, as well as large scale retail and service establishments. OC, Office Commercial: OC districts are intended to accommodate a variety of commercial and nonresidential uses characterized primarily by retail, office and service establishments not in the central business area. LI, Light Industrial District: LI districts are intended to permit light manufacturing, industrial, wholesale commercial uses which do not create nuisances by noise or emissions beyond the premises. UDO Combined Draft_v1 – MRB Group 31 PD, Planned Development District: PD districts designate an area for which an approved development plan constitutes the district regulations. It is intended to utilize the factors of efficiency, economy, flexibility, creative site design, improved appearance, compatibility of mixed uses, maximum benefits from open space, safe and efficient vehicular and pedestrian access for a development characterized by a unified site design for mixed uses where existing zoning district cannot permit. A planned development district may be predominantly residential or predominately commercial. Source: Laurel Island PUD, Charleston, SC PO, Parks/Open Space District: The open space district is established as a district in which the primary use of the land is predominantly reserved for flood control, future thoroughfare right-of- way, public recreation, community facility sites, airport approaches, natural or man-made bodies of water, forests, and other similar open space uses. 3.7. District Development Standards (ON NEXT PAGE UDO Combined Draft_v1 – MRB Group 32 33 Table 3.7.1: District Dimensional Standards ZONING DISTRICTS RA RR SR1 SR2 SR3 TR1 TR2 TR3 VC TC PI CC IC OC LI PO LOT CONFIGURATION Lot Width, Minimum 200' 100' 75' 60' 50' 40' 40' 50' 40' None 50' 50' 50' 50' 75' None Lot Size, Minimum 5 acres 2.5 acres 1 acre .5 acre .25 acre 8,750 sq. ft. 6,500 sq. ft 5,500 sq. ft. 4,000 sq. ft. None None None None None 10,000 sq. ft. None Maximum Lot Coverage 25% 25% 25% 30% 45% 50% 65% 75% None None None 70% 70% 70% None None PRINCIPAL BUILDING PLACEMENT1 Front Setback, minimum 50' 50' 25' 25' 25' 15' 10' 0' 0' 0' 25 15 15 25 15 None Front Setback, maximum2 None None None None None 25' 25' 25' 15' 10' None None None None None None Side Setback (Corner) 20' 20' 10' 10' 10' 10' 10' 10' None None 10' 15' 15' 15' None None Side Setback 20' 20' 10' 10' 10' 10' 10' 10' None None 10' 15' 15' 15' None None Rear Setback 20' 20' 20' 20' 20' 15' 15' 10' 10' None 25' 25' 25' 25' 25' None Building Height 50' 50' 35' 35' 35' 35' 35' 50' 35' 50' 65' 65' 65' 50' 50' N/A S-48 (Columbia Avenue) From New Bridge to New Road 2 (Heelsplitter Boulevard) ³ 30’ 30’ 30’ 30’ 30’ 30’ 30’ 30’ 30’ 30’ 30’ 30’ 30’ 30’ 30’ 30’ US 76 (Chapin Road) From Town Boundary traveling west to S-49 (Clark Street)³ 20’ 20’ 20’ 20’ 20’ 20’ 20’ 20’ 20’ 20’ 20’ 20’ 20’ 20’ 20’ 20’ US 76 (Chapin Road) From S-49 (Clark Street) to S-29 (Saint Peters Church Road)3 45’ 45’ 45’ 45’ 45’ 45’ 45’ 45’ 45’ 45’ 45’ 45’ 45’ 45’ 45’ 45’ US 76 (Chapin Road) From S-29 (Saint Peters Church Road) to Town Boundary traveling west³ 10’ 10’ 10’ 10’ 10’ 10’ 10’ 10’ 10’ 10’ 10’ 10’ 10’ 10’ 10’ 10’ ACCESSORY BUILDING PLACEMENT Front Setback4 None None 0' 0' 0' 5' 5' 5' 10' 10' 0' 10' 10' 10' None None Side Setback (Corner) 10' 10' 5' 5' 5' 5' 5' 5' 5' None 5' 5' 5' 5' 5' 5' Side Setback 10' 10' 5' 5' 5' 5' 5' 5' 5' None 5' 5' 5' 5' 5' 5' Rear Setback 10' 10' 5' 5' 5' 5' 5' 5' 5' None 5' 5' 5' 5' 5' 5' Height5 1 See Section 3.8.4.d for Corner lots. 2 A minimum of 80 percent of the front façade must be located within the maximum front setbacks, unless otherwise regulated wit hin Article 6 3 Based on the plans provided in the SCDOT S-48 (Columbia Avenue) Corridor Improvement Project and on plans by SCDOT to perform a feasibility study, potentially resulting in the widening of US 76 (Chapin Road) 4 The front setback for accessory buildings shall start at the principal façade of the principal use. 5 The height of an accessory building shall not be greater than the height of the principal building, unless located in a Publi c Institutional (PI) or Light Industrial (LI) zoning district. 34 3.8. General Lot and Building Standards 3.8.1. Standards Not Exclusive In addition to the lot and building provisions in this article, standards for lots and buildings in related building and fire codes may also apply. 3.8.2. Interpretation of Fractional Measurements When any requirement of this ordinance results in a fraction of a unit, a fraction of ½ or more shall be considered a whole unit and rounded up to the nearest whole number. 3.8.3. General Lot Standards a. Lot Occupancy: No building shall hereafter be erected, altered or moved to occupy a greater percentage of lot area than is permitted within the zoning district in which it is or will be located. b. Lot Reduction: No lot shall be reduced in size which will not maintain the total lot area, lot width, necessary yards, courts or other open space, lot area per dwelling unit or other requirements of this article. c. Yard Use Limitations: No part of a yard, court or other open space or off-street parking required in connection with any building for the purpose of complying with the regulations of this article shall be included as part or all of the required yard, court, or other open space or off-street parking for another building or structure, except as provided in this article. 3.8.4. Lot Setbacks a. Irregular Lots: The location of required setbacks on irregularly shaped lots shall be determined by the Administrator in accordance with the following provisions: 1. Irregular Lot Lines: Generally, side lot lines shall be perpendicular or radial to the street right-of-way, and rear lines should be approximately parallel to fronting right-of-way lines. Irregularly shaped lots shall be permitted at the discretion of the Administrator when unique site conditions exist. 2. Irregular Lot Setbacks: The location of required front, side, and rear yards (or setbacks) on irregularly shaped lots shall be determined by the Administrator, based on the prevailing spacing of buildings on the adjacent parcels. Where questions arise as to appropriateness, the applicant may be requested to provide additional design information. b. Double- and Triple-Frontage Lots: On lots with two street frontages, not located at a corner, or with three frontages and located at a corner, the front setback will apply to both the street that the building derives its address from, in addition to the opposite, parallel street. This does not apply to lots located on a corner with a rear alley. Double- and Triple Frontage lots shall base their setback regulations based on the street that it derives its address from. Double frontage lots shall be avoided except in commercial zones, where essential to provide separation of residential development from railroad or major street right-of-way or from non-residential uses or where necessary due to topography. Where a railroad or major thoroughfare right-of-way, as shown on the major thoroughfare plan, abuts or runs through any portion of the subdivision, the subdivision plat shall provide for either a minor street or lots backing onto said right-of-way having a minimum depth of two hundred (200) feet c. Flag Lots: The use of flag lots in residential subdivisions shall be permitted only if dictated by the terrain. Flag lots shall not be permitted to solely allow an increase in the number of lots. 35 The access drive to a flag lot shall have a minimum width of 30 feet and shall be a deeded part of the lot so accessed. No two flag lots may abut or converge at the (poles) street right- of-way d. Corner Lots: Corner lots shall be at least five (5) feet wider than interior lots; provided however, the maximum required width of corner lots shall be one hundred (100) feet. The minimum side building setback distances shall be at least the minimum front building setback distance for the side adjacent to the street. e. Setbacks from Designated Corridors: It shall be the responsibility of the applicant to ensure that setbacks within a development site are measured from any potential future rights-of- way planned by the State, County, or Town. If there are plans to establish specifically- designated streets in an adopted corridor plan or subdivision if the adopted plan shows, at a minimum, the applicant shall work with the applicable entity to propose a compatible connection or improvement in terms horizontal alignment of the future roadway, pedestrian and bicycle amenities, streetscape improvements and necessary right-of-way, and other applicable requirements. f. Residential variances and restrictive covenants: The Administrator shall only grant an Administrative Adjustment (Section 10.10) for a lot size or setback requirement that conforms to the restrictive covenants of a subdivision existing at the time of the adoption of this chapter or at the time of annexation into the town. 3.8.5. Infill Lot Setbacks In certain neighborhoods, historic setbacks do not conform to current standards. It is the intent of the UDO to create predictability within blocks and not reduce or enlarge setbacks where existing precedents are present. The Administrator shall have the authority to determine setback for infill lots to ensure compatibility with adjacent structures unless superseded by an adopted plan 3.8.6. Encroachments The features listed below shall be permitted to encroach into a required yard or right-of-way, as applicable. Nothing in this section shall be misconstrued to conflict with any other portion of this Ordinance. a. Encroachment over Sidewalks: With approval of the City, County or SCDOT (whichever has authority over a ROW), awnings, arcades, canopies, and galleries, may encroach over the sidewalk to within 2 feet of the curb, but they shall provide a vertical clearance of at least 8 feet from any sidewalk. This encroachment is only permitted in the Town Center (TC), Village Commercial (VC), and Town Residential Districts (TR1, TR2, and TR3). b. Upper Story Encroachments: Bay windows, balconies, and similar features projecting from the principal building may encroach up to 50% of the depth of the front and street side setback. With approval of the City, County or SCDOT (whichever has authority over a ROW), upper-story balconies or bay windows may encroach over the right-of-way a maximum of 3 feet, but they shall provide a vertical clearance of at least 8 feet from any sidewalk. This encroachment is only permitted in the Town Center (TC), Village Commercial (VC), and Town Residential Districts (TR1, TR2, and TR3). c. Lower Story Encroachments: Cornices, eave overhangs, chimneys, flues, bay windows, and similar projections (including gutters) may encroach up to 2 feet into any required yard. 36 d. Covered Porches: Covered porches may encroach a maximum of 8 feet into any required front yard or street side yard setback and to within 5 feet of any interior side or rear yard property line. e. Uncovered Porches, Decks, Patios, Steps and Stairs: Uncovered and unenclosed porches, decks, patios, steps and stairs, and other similar features may encroach to within 5 feet of any interior side and rear property line. Steps and stairs may encroach up to 100% of the depth of any required street yard setback, but may not encroach upon any public sidewalk. f. Walkways and Driveways: Uncovered and unenclosed walkways, and driveways may encroach up to 100% of the depth of any required setback, unless a buffer (Section 7.5) is required. g. Handicap Ramps and Lifts: Ramps, lifts, fire escapes, or other required accessibility structure by the fire or building code that is attached to the exterior of a building may encroach into any required yard but may not be closer to any property line than 5 feet. Such features shall not be located in a front yard if it is possible to accommodate them in a side or rear yard. h. Mechanical Equipment: Mechanical equipment such as pool pumps, ventilation systems, heating and air conditioning units, tv antennas, and satellite dishes, and other similar equipment determined by the Administrator, may encroach up to 25% into a required side or rear yard. Mechanical Equipment shall comply with screening requirements in Section 7.3.9. i. Fences and Garden Walls: Fences and garden/yard walls may encroach into required setbacks. The design and material requirements for fences are subject to the standards in Article 6. The support structures for fences shall be located on the inside of the fence, and no fence, wall or hedge shall exceed the following dimensions: 1. In all districts fences within the front or street side setback shall be a maximum of 4’ in height to ensure that the sight triangle or visual clearance is not obstructed. a. In the Light Industrial (LI) zoning district parcels fronting a Primary Street may have fences or walls up to 6 feet in height when not within the sight triangle or visual clearance area as regulated by Lexington County or SCDOT. Parcels fronting all other streets may be up to 10 feet in height. b. When residential uses are adjacent to commercial, industrial, or other nonresidential use, the Administrator may increase this height requirement to 8’. 2. Side or rear setback of residential districts: Privacy fences or walls shall be a minimum of 6’ and have a maximum height of 10’. 3. Side or rear setbacks of nonresidential and industrial: Fences or walls may be a maximum of 10’ in height. j. Mailboxes: Mailboxes may encroach into a front setback area. 3.8.7. Measurement of Height a. Building Height: Building height is measured as the vertical distance from the mean grade elevation taken at the fronting street side of a structure to the roof line of a flat roof, the ridge of a pitched roof, or the deck line of a mansard roof. b. Flag Poles shall conform to the height requirements in Section 9.7.2.a.12. c. Under-roof areas with dormers shall be counted as half-stories. d. Exemptions from Building Height Requirements: Unless specifically stated otherwise elsewhere in this ordinance, the height requirements established in this ordinance shall not apply to: 37 1. Building elements (such as church spires, towers, cupolas, domes, etc.) not intended for human occupancy; 2. Structures that are an accessory to institutional uses (such stadium press boxes); 3. Water towers, transmission towers, and observation towers, unless otherwise regulated in this ordinance; 4. Masts and antennas; and 5. Mechanical penthouses not exceeding 15 feet in height which are set back at least 20 feet from the front elevation of the building, and not visible from view from the public right-of-way. e. Other Height Requirements: Height requirements for signs, lighting, landscape screens, and all other structures or objects for which a dimensional height requirement is established by this ordinance shall be measured as the vertical distance from the highest ground level at the structure or object’s foundation to its highest point. 38 4.0 Land Use Provisions 4.1. Purpose and Intent The use provisions in this chapter indicate which uses and activities are permitted by right, permitted with conditions, permitted by special exception, and prohibited. The provisions are intended to produce the desired development outcomes for each district as set forth in the Comprehensive Plan and in Article 3 – Zoning Map and Districts. 4.2. Applicability No land, building or structure, including signs, shall be used or occupied, and no building or sign shall be constructed, altered or moved, unless in conformity with the regulations herein specified for the particular zoning district. 4.3. Table of Permitted Uses 4.3.1. Use Permissions Defined The Table of Permitted Uses (Table 4.3.2) assigns one of the following permissions to each use in each district: a. Permitted Use (P) The use is permitted by-right, with no additional conditions or requirements. b. Existing Buildings Only (E) The use is permitted in existing buildings only and is considered a legal nonconforming use. Any expansions over 20% to the gross floor area, or renovations exceeding parameters in regulated by Article 11. c. Conditional Use (C) The use is permitted, provided that the additional use conditions set forth in this article are met. 1. The specified conditions are intended to ensure that these uses are compatible with other development permitted within the districts. 2. Approval procedures for conditional uses are in Section 10.4, Zoning Permit. d. Special Exception (SE) The use is permitted only when a Special Exception has been approved. 1. Special Exceptions are required for uses that may be compatible with other uses permitted in a district, but which, because of their unique characteristics or potential impacts on the surrounding neighborhood and/or the Town as a whole, require individual consideration in their location, design, configuration, and/or operation at the particular location proposed. 2. All applications for Special Exceptions shall, at a minimum, meet the standards for the district in which they are located and the additional standards set forth in this article for that use. There may also be specific building design standards that must be met (Article 6). 3. Approval procedures for Special Exceptions are found in Section 10.11. e. Prohibited Uses (blank) The use is prohibited in the specified district 4.3.2. Table of Permitted Uses (Continued on next Page) 39 Table 4.3.2 – Table of Permitted Uses Type of Use RA RR SR1 SR2 SR3 TR1 TR2 TR3 VC TC PI CC IC OC LI PO Code Section AGRICULTURAL 4.4.1 Horticultural nursery C C C C 4.4.1.a Agricultural Uses or Animal Production C C 4.4.1.b CAFO SE 4.4.1.c Campground C C C 4.4.1.d RV Park SE SE 4.4.1.e RESIDENTIAL USES 4.4.2 Accessory Dwelling Unit C C C C C C C 4.4.2.a Bed and Breakfast C C C C C C 4.4.2.b Bed and Breakfasts with commercial meeting privileges C C C C C C 4.4.2.c Conservation Subdivision C C C C C 4.4.2.d Day Care Home - Large (6-10) C C SE SE SE SE SE P P P 4.4.2.e Day Care Home - Small (5 or less) P P C C SE SE SE SE SE C C C Dwelling, Attached Single Family P P P C C Dwelling, Detached Single Family P P P P P P P E C E Dwelling, Multi-Family C C C 4.4.2.f Dwelling, Two-Family P P P E C E Dwelling, Three-Family C P P C C 4.4.2.g Group Home - Large (8 or more) SE SE SE SE SE SE SE SE 4.4.2.h Group Home - Small (7 or less) C C C C C C C C 4.4.2.h Manufactured Home C C C 4.4.2.i Manufactured Home Park SE Nursing Homes SE SE P P P P P P Short Term Rental C C C C C C C C C COMMERCIAL 4.4.3 Automobile Service Station, Major C C 4.4.3.a Automobile Service Station, Minor C C 4.4.3.a Automobile, ATV, Motorcycle, or Boat Sales C C P 4.4.3.b Automotive Parts Stores P P Bar or Night Club SE SE C C C C 4.4.3.c Car Wash C P 4.4.3.d Catering Service C C P C 4.4.3.e Check Cashing SE 4.4.3.f Commercial Day Care Center C C SE SE SE SE SE P P 4.4.3.g Convenience Store C C C P P 4.4.3.h Drive-In Theater P P P Dry Cleaning C P P 4.4.3.j Financial Institutions C P P P P Funeral Homes C C P P 4.4.3.k Garden Centers SE P P General Retail C C C C P P 4.4.3.l Hardware Stores C P P 4.4.3.m 40 Type of Use RA RR SR1 SR2 SR3 TR1 TR2 TR3 VC TC PI CC IC OC LI PO Code Section Hotels/Motels C C P P P 4.4.3.n Indoor Storage P P Liquor Stores C C P P 4.4.3.o Microbrewery, Micro-Distillery, Micro-Winery C C C C C C C P P SE C 4.4.3.p Miniature Golf C 4.4.3.q Mixed-Use Building P P Office Building C SE SE C C P 4.4.3.s Office, Medical C C C C P P P P P 4.4.3.r Office, Non-medical C C C P P P P P Outside Display/Sales C C P P 4.4.3.t Parking Lots C C C C C 4.4.3.u Personal Service C P P P P C 4.4.3.v Pet Boarding C SE SE P P 4.4.3.w Restaurant, Full Service C C P P P P 4.4.3.x Sexually Oriented Businesses SE Specialty Retail C P P P P 4.4.3.y Tattoo Parlor SE 4.4.3.z Tobacco Stores C P C 4.4.3.aa Vape, E-Cig, store and lounges SE SE SE 4.4.3.bb Veterinarian C C C P P P 4.4.3.cc INSTITUTIONAL, CIVIC, OR PUBLIC 4.4.4 Amphitheaters SE C P C C C 4.4.4.a Cemetery and Mausoleums P P C P SE SE SE SE 4.4.4.b Civic and Social Organizations C SE SE SE SE P P P P P P 4.4.4.c Colleges, Universities, and Vocational Schools C SE SE P P P C 4.4.4.d Elementary Schools SE SE SE SE SE SE SE SE SE SE SE SE SE SE Farmers Market, Indoor C C C C P P P C 4.4.4.e Farmers Market, Outdoor C C C C C C C C P P P P C P 4.4.4.e Golf Course P P SE SE SE SE SE Government Building or Facility C C C P P P P P P P 4.4.4.f Hospital C SE P P P P 4.4.4.g Kindergarten or Pre-school SE SE SE SE SE SE SE SE SE SE SE SE SE SE Parks and Open Space P P P P P P P P P P P P P P P P Public Utility Stations P P P P SE SE SE SE SE SE P P P P P SE Recreational Facilities P P SE SE SE SE SE SE P P P P P Religious Assembly P P P C C C C C C P P C P 4.4.4.h Secondary Schools SE SE SE SE SE SE SE SE SE SE SE SE SE SE Sports Stadium SE SE P P P 4.4.4.i Theater C C P P P Transportation Terminal (Bus and Rail) SE SE SE SE P P SE P SE 41 INDUSTRIAL 4.4.5 Type of Use RA RR SR1 SR2 SR3 TR1 TR2 TR3 VC TC PI CC IC OC LI PO Code Section Animal Shelters P P SE SE P P Correctional Facility SE SE SE SE SE Crematory SE SE SE P Heavy Equipment Rental SE C C P 4.4.5.a Indoor Shooting Range SE SE SE SE SE Junk Yard or Scrap yard SE SE Manufacturing or Production Facility P Outdoor Shooting Range SE SE SE Outdoor Storage SE SE SE C Repossession Services C C P 4.4.5.b Telecommunication Tower SE SE SE SE SE SE 4.4.5.c Truck Sales and Service SE C P 4.4.5.d Warehouse SE C P 4.4.5.e Wholesale Trade SE P P 42 4.3.3. Multiple Principal Buildings or Uses Per Lot When all principal uses of a development fall within one use category, the entire development is assigned to that use category. When the principal uses of a development fall within different use categories, each principal use is classified in the applicable category and each use is subject to all applicable regulations for that category. Properties shall be constrained to one principal use per lot, with the exception of mixed-use buildings and multi-building sites approved by the Town. Exceptions are also given to properties located within RR and RA zoning district, where 2 total detached residential dwelling units per lot is permitted. 4.3.4. Unlisted Uses Where proposed development contains a use not listed within the Use Table in Section 4.3.2, the Administrator shall determine the most similar listed use and to apply the standards of such use. This determination shall be based on the definitions contained in this Ordinance, the purpose and intent of the respective zoning district, characteristics of the use including hours of operation, employees, required floor area, building or site arrangement, and any commonly accepted use-based guides (e.g., North American Industrial Classification System (NAICS), Institute of Transportation Engineers (ITS) Trip Generation Guide), and may be appealed using the process identified in Section 10.13. 4.4. Conditional Use and Special Exception Standards The uses listed in this section are either permitted with certain conditions, or must be approved by the Board of Zoning Appeals by Special Exception. However, the conditions in this section apply to all uses permitted with conditions and special exception. 4.4.1. Agricultural Uses a. Horticultural Nursery 1. Lot Size: Minimum 2 acres 2. Sale of Produce: Produce stands shall be setback at least 25 feet from the edge of pavement or the back of curb, and shall be located entirely within private property. If the applicant is not the owner of the property in which the produce stand is located, they must have written authorization to use the site. The Administrator may request additional information to ensure health and safety measures are met. 3. Animals: Any use under this classification shall not butcher or otherwise prepare meat for individual sale on-site. All sale of livestock and agricultural products shall adhere to all applicable local, state, and federal regulations. b. Agricultural Uses or Animal Production 1. Lot Size: Minimum 2 acres 2. Sale of Produce: Produce stands shall be setback at least 25’ from the edge of pavement or the back of curb, and shall be located entirely within private property. If the applicant is not the owner of the property in which the produce stand is located, they must have written authorization to use the site. The Administrator may request additional information to ensure health and safety measures are met. 3. Animals: Any use under this classification shall not butcher or otherwise prepare meat for individual sale on-site. All sale of livestock shall adhere to all applicable local, state, and federal regulations. c. CAFOs 43 1. Location: No structure or other facility of a CAFO for swine shall be located closer than one thousand (1,000) feet to the adjoining property line, unless the titleholder of the adjoining land executes a waiver with the titleholder of the land where the CAFO for swine is established or proposed to be established, under terms and conditions that the parties negotiate. However, if the CAFO for swine is located on the adjoining property or within one thousand (1,000) feet of a proposed facility, the property line setback applicable to the proposed facility cannot be reduced by consent of the adjoining property owner. CAFOs for swine shall be located no closer than two thousand (2,000) feet from the outer edge of a lake, river or stream, including ephemeral, intermittent, and perennial streams as defined by the SC Forestry Commission. CAFOs for swine containing one million (1,000,000) pounds (normal production live weight) or more shall be separated a distance of twenty-five (25) miles. CAFOs for swine containing more than five hundred thousand (500,000) pounds but less than one million (1,000,000) pounds shall be separated a distance of not less than two (2) miles 2. Setbacks: Setback and separation standards for CAFOs for animals other than swine shall be as required by the regulations of the state department of health and environmental control. 3. Health Risk, Environmental, and Quality of Life Studies: The Administrator and/or BZA may require a wide variety of studies to be completed, as it relates to the potential health risk, environmental impact, and quality of life of the surrounding properties and the community at large, that the proposed CAFO would impact. All required studies would be completed by certified professionals with experience with conducting said studies, to ensure that nearby properties and the community at large are not negatively affected by the proposed use. d. Campground 1. Lot Size: Minimum of 5 acres 2. Maximum Density: For permanent, habitable, structures, 4 units are permitted per acre. Individual campsites may not exceed 8 campsites per acre. All permanent structures shall be required to have a valid certificate of occupancy. 3. Maximum Stay: No person or tent may occupy the campground for a period in excess of 30 calendar days in a 90-calendar day period. 4. Operation: A register of all occupants, the space occupied, and the time of arrival and departure shall be maintained by the on-site manager. 5. Recreation: All campgrounds shall have a recreational element such as access to trails, horse riding, hunting, fishing, kayaking or other similar activity commonly associated with outdoor activities. All activities shall have the proper state and federal licenses, when required. 6. Infrastructure: A central service building containing all necessary toilets, bathhouses and other plumbing fixtures specified in the most current edition of the Plumbing Code, as amended, shall be provided. a. Cabins: If a campground only contains cabins, as described within this section, the requirement for a central service building may be waived by the Administrator. 7. Buffer: All spaces for camping and recreational vehicles shall be located at least 150 feet from any nearest property line. 44 8. Dumpster: The site shall have adequate, regular trash collection from a centrally located dumpster. The dumpster shall be enclosed (per Section 7.3.9.b) and secured to prevent windblown litter or access to animals. e. Recreational Vehicle (RV) Parks 1. Lot Size: Minimum of 5 acres 2. Maximum Units: Eight (8) units per acre 3. Maximum Stay: No RV may occupy the park for a period in excess of 90 calendar days in a 120-calendar day period. 4. Individual lots: Each leasable lot for a RV shall be a minimum of 35feet wide. 5. Parking: One off-street parking space per individual leasable lot. 6. Accessory Buildings: No accessory buildings used for bathrooms, utilities or other supporting infrastructure shall be permitted for occupancy. a. Bathroom: All parks shall have adequate toilet facilities b. Recreation: All parks shall have a recreational element with access to trail, water feature, picnic tables, playgrounds, or similar feature. 7. Fire Apparatus Access Road: Shall provide fire access roads per South Carolina law. 8. Fire Hydrant: Shall provide fire hydrant systems when served by a public water system. Any requirements by the Lexington County Fire Marshal shall supersede the requirements in this section. 9. Buffer: All RVs within the park shall be setback a minimum of 150 feet from property lines. A Type C landscape buffer, as defined in Article 7, shall be required within this setback. 10. Dumpster: The site shall have adequate, regular trash collection from a centrally located dumpster. The dumpster shall be enclosed and secured to prevent windblown litter or access to animals. 11. Condition of Vehicles: All RVs shall be operable and moveable. Non-operable or immoveable vehicles shall be removed from the site within 10 days of non-operability or state of immovability. No RV is permitted to be added-on to, or, be permanently affixed to utilities. 4.4.2. Residential Uses a. Accessory Dwelling Units 1. General Standards: Shall be subordinated in size, scale, and orientation relative to the principal use. 2. Materials: Shall be composed of the same or similar or compatible materials as the principal use. Similar or compatible materials shall be determined by the applicable review entity. 3. Number allowed: When located in suburban residential districts (SR1, SR2, and SR3), properties shall be limited to a single accessory dwelling unit per single-family dwelling per parcel. b. Bed and Breakfasts 1. Applicability: The regulations in this section apply to both Bed and Breakfast with or without commercial meeting privileges. 2. Operation: The use shall be owner-occupied. The owner’s primary residence shall be no further than 50-miles from the Bed and Breakfast. No hourly rates shall be permitted. Overnight, weekly, or monthly rates are permitted. 45 3. Register: The owner shall maintain a register of guests, including name, address, and date of occupancy, including check-in and check-out. 4. Licenses: The resident owner shall obtain a business license with a valid Certificate of Occupancy. 5. Design: The principal structures shall retain its single-family character to remain compatible within the district that it is located. This condition applies when a residence is constructed or converted to become a Bed and Breakfast, and also when an existing Bed and Breakfast is expanded. The Administrator may require architectural review by the ARB, as specified in Section 10.5.1.g. 6. Accessory Structures: Short term rental units may be permitted within already approved and compliant accessory dwelling unit. Manufactured Homes may not be used for a Bed and Breakfasts. 7. Meals: The owner shall provide a meal for breakfast to all guests. Meals shall only be served to registered guests. 8. Bed and Breakfasts with Commercial Meeting Privileges: Shall adhere to all regulations in Section 4.4.2.b above. Additionally, the hosting of events such as weddings, business meetings, retreats, reunions, and other organized events shall only be permitted with the following conditions: a. Location: Only permitted in Rural Agricultural (RA), Rural Residential (RR), Town Residential 1 (TR1), Town Residential 2 (TR2), and Town Residential 3 (TR3) districts. b. Operation: The home’s principal use is residential. The operation of the facility does not incur repeat or reoccurring violations to the Town’s noise ordinance, or other Ordinances of the Town. Such repeat violations may result in suspension or revocation of the business license. c. Minimum lot size: .5 acre, unless the applicant demonstrates conformance with the below parking requirement and receives the applicable approval from the Fire Marshal. d. Parking: The site can accommodate at least 50 on-site parking spaces. Parking surfaces may be unimproved, however a site plan showing parking spaces, circulation patterns, and means of ingress and egress shall be required and evaluated by the Administrator prior to issuances of a permit. c. Conservation Subdivision 1. See Article 5 for land development regulations for Conservation Subdivisions. d. Day Care Homes 1. Applicability: The following regulations are applicable to both Small (5 persons or less) and Large Day Care Homes (6-10 persons): a. Must have a playground or other outdoor recreational equipment b. The playground or outdoor play area shall be enclosed by a fence or wall. All access shall be secured from the exterior. Similar methods for securing outdoor play areas may be considered by the Administrator if the applicant implements best practices for Crime Prevention Through Environmental Design (CPTED). c. Shall receive all applicable Federal, State, and Local licenses, such as a license from the South Carolina Department of Social Services. Proof of approval from applicable agencies shall be provided to the Administrator at the time of application. 2. Applicable to Large Day Care Homes (6-10 persons): a. Lot Size: Minimum 20,000 square foot lot. 46 e. Dwelling, Attached Single-Family 1. Maximum Number of Attached Units: No more than 6 attached, single family units shall be permitted per building. 2. Side Setbacks: Attached Single-Family units are exempt from side setbacks where they are otherwise permitted in this Article, and conform to any other applicable regulations. 3. Entrances: All attached single-family dwellings (townhomes, rowhomes, etc) shall have an independent ingress and egress. 4. Building Design: All applications for attached single-family units shall be subject to review by the ARB in the form of a Major Architectural Review application. 5. Parking: All parking shall be located to the rear and accessed via an alley or rear lane. The design of this alley shall be subject to Lexington County. f. Dwelling, Detached Single-Family 1. Applicable to Village Commercial (VC): Shall have a commercial component, and fall under the live/work use definition. Commercial components include home occupations, short term rentals, day cares or Bed and Breakfast uses. The commercial space shall front the street, the residential portion shall be either in the rear or the second story of the live/work unit. Building design shall be compatible with surrounding properties in terms of scale, orientation, massing, setback, and material composition. Access from alleys or from the rear is encouraged, when alley is already present and contiguous to the lot alley access is required. 2. Applicable to Town Center (TC): Legally conforming detached single-family dwellings are subject to the regulations within Section 11.7, Legal Nonconforming. g. Dwelling, Three-Family 1. Building Design: Subject to the residential design standards in Article 6. Requires a Major Architectural Review (Section 10.6). h. Dwelling, Two-Family 1. Applicable to Village Commercial (VC): Shall have a commercial component, and fall under the live/work use definition. Commercial components include home occupations, short term rentals, day cares or Bed and Breakfast uses. The commercial space shall front the street, the residential portion shall be either in the rear or the second story of the live/work unit. Building design shall be compatible with surrounding properties in terms of scale, orientation, massing, setback, and material composition. Access from alleys or from the rear is encouraged, when alley is already present and contiguous to the lot alley access is required. i. Dwelling, Multi-Family 1. Building Design: Requires a Major Architectural Review (Section 10.6). 2. Site Design: Shall be reviewed as a Major Subdivision. 3. Buffers: Shall comply to standards in Article 7. 4. Mixed-Use: Multi-family units above first-floor commercial uses are required within the Town Center (TC) and Village Commercial (VC) districts. 5. Open Space Requirements: Shall provide on-site amenities for residents such as dog parks, gyms, plazas, courtyards or other similar features as permitted by the reviewing entity and in accordance with Article 5. 6. Net density: To ensure the protection of the scale of existing development and neighborhoods, the net density for any multi-family development shall be no more than 47 16 dwelling units per acre. The net density for multi-family units for specific zoning districts shall be as follows: a. Town Residential 3 (TR3): 12 units per acre b. Village Commercial (VC): 14 units per acre. j. Group Home 1. License Required: Shall be licensed and regulated by all applicable Federal, State, and Local agencies. Proof of licensure shall be provided to the Administrator. 2. Operation: Shall be well maintained inside and outside, be safe and sanitary, and not be occupied by a person who would constitute a direct threat to the health and safety of other persons. The minimum stay of each occupant, excluding employees, shall be no less than 30 days. 3. Spacing: Group Homes located within Suburban Districts (SR1, SR2, and SR3) shall not be located within a radius of three thousand (3,000) feet of another Group Home, as measured from the nearest point of the existing home property line to the property line of the proposed home. Group Homes located within all other districts shall be not be located within a radius of one thousand (1,000) feet of another Group Home. 4. Group Home Large (8 or more) a. Minimum Lot: 30,000 sq. ft. b. Emergency Services: Shall demonstrate that the use is serviceable by the appropriate emergency service depending on services offered by the Group Home. k. Manufactured Homes 1. Applicability: Any manufactured home constructed before July 1, 1970, must be approved by Underwriters’ Laboratories and any manufactured home constructed after that time must meet all applicable state and federal standards 2. As an Accessory: Manufactured Homes shall not be used as an accessory dwelling unit, unless within a Rural Residential (RR) and Rural Agricultural (RA). 3. Design Standards a. All manufactured home shall have a permanent and continuous foundation enclosure, unpierced, except for required ventilation and access, shall be installed. The enclosure may consist of brick, or other masonry, or wood. b. Any wood framing for foundation skirting shall be constructed with treated lumber. The foundation or skirt shall be in compliance with all applicable codes and regulations. c. Any tongue, axles, running lights, and removable towing apparatus must be removed or screened prior to the issuance of a certificate of occupancy. d. Roofs must be covered with a material that is customarily used on site-built dwellings. The pitch of the main roof shall not be less than 3:12. Minimum overhang of eaves shall be twelve (12) inches. e. Exterior siding shall be wood, vinyl, metal horizontal siding, brick, fiber cement board, stucco, or similar materials. Smooth, ribbed, or corrugated metal or plastic panels, exposed plywood, and materials with a high-gloss finish are not permitted. f. All such units shall be required to have adequate sanitary facilities with such facilities being properly connected to the sanitary sewer system of the town and be served by a separate electric meter. Exceptions for septic systems may be granted where no existing sanitary sewer system connections are available and approval is 48 granted from the South Carolina Department of Health and Environmental Control (SCDHEC). g. Minimum width of the manufactured home as assembled on the site shall not be less than 20 feet, as measured across the narrowest portion. l. Manufactured Home Parks 1. Minimum Lot Size: 2 acres 2. Infrastructure: The site shall be served by public water and sewer facilities when connections are available. Exceptions for septic systems may be granted where no existing sanitary sewer system connections are available and approval is granted from the South Carolina Department of Health and Environmental Control (SCDHEC). 3. Emergency Services: Shall be within the service area of police, fire, and ambulatory services and supply a document to the Administrator stating the availability of services. 4. Security: On-site security operating 24 hours a day, 7 days a week is required. 5. Minimum Width of Leasable Lot: 40 feet. 6. Open Space: 20% of the total land shall be devoted to open space. Types of permitted open or green spaces can be found in Article 5. m. Short Term Rental 1. Applicability: Short Term Rental is the leasing of a room and/or home for a period of 30 days or less. 2. Proximity: The applicant shall provide a list of all other short term rentals within a 300’ radius at the time of application. 3. Maximum units: 3 units 4. Maximum number of consecutive days short term rental may be rented to a renter: 29 5. Business License: Property owner required to acquire a business license with the Town of Chapin. Prior to the issuance of a business license, the applicant shall first produce a valid Certificate of Occupancy from Lexington County. Business License number must be displayed on all advertisements and/or bookings for short term rental. Applicant properties may be subject to an inspection by the Town of Chapin upon application. 6. Contact: Property owner, or resident manager, must provide the Town a contact number that is available 24/7 for contact and immediate response with a responsible agent that can be on site within 1 hour of contact. The property owner or resident manager must have a primary residence within 40 miles of the use. 7. Guest Registry: The owner or responsible agent shall maintain a guest register to include names, addresses, phone numbers, and dates of occupancy of all guests. 8. Structures Excluded: Campers, Boats, any form of recreational vehicle, mobile or manufactured homes, and structures not intended for permanent residence may not be used as short-term rentals. 9. Parking: Off-Street Parking shall be required per table (8.4.1). 4.4.3. Commercial Uses a. Automobile Service Stations 1. Fuel Sales: Fuel pumps may be an accessory to Automobile Service Stations. Fuel sales as an accessory to Grocery Stores shall be permitted per the accessory use table in Section 4.5.2. 2. Screening of Vehicles: All vehicles being stored on the property for the purposes for repair, service, or maintenance shall be located in the rear of the building and screened from the public right-of-way, and adjacent property 49 3. Canopy and Fuel Pumps: Shall be oriented to the side or rear of the principal structure. b. Automobile, ATV, Motorcycle, or Boat Sales 1. Parking of Vehicles: No vehicles shall be stored on an unimproved surface, required buffer, berm, or landscaping feature. No vehicle shall be elevated for the purposes of advertising, by any means, above the parking grade. Vehicles for repair shall be stored in the rear or side, screened from the public right of way, and adjacent property. No vehicle undergoing repair services, under any circumstance, should be on-site for more than 90 days. 2. Service Bay Doors: Repair of vehicles or boats shall occur within an enclosed building. Service bay doors shall not be visible from the public right-of-way. If service bay doors face a residential property, they shall be opaquely screened from view. c. Bars and Nightclubs 1. Location: Shall not be located within 250 feet, as measured from nearest property line, to a Suburban Residential (SR1, SR2, and SR3) district. Shall not be located within 500 feet of a place for religious assembly or school, unless located within the Town Center (TC) or Village Commercial (VC) district. 2. Accessory: A bar may be considered an accessory to a primary use, such as a hotel or restaurant. When associated with a restaurant, alcohol sales may not exceed 50% of total sales within a given day. If sales exceed 50% of total sales, then the owner shall apply for a zoning permit from the Zoning Administrator as the use has changed. d. Car Wash 1. Location of Service Areas: Locations of bays for vacuums and other equipment shall be placed on the side or rear of the principal building. Drying fans shall be placed so as to reduce the impact of noise audible on adjacent property as much as possible. e. Catering 1. Operation: The sale of individual meals for general public shall be classified as a full- service restaurant and not a catering service. 2. Home Occupation: If tied to a home occupation, the applicant shall adhere to all requirements of Home Occupations (Section 4.5.3.n) f. Check Cashing 1. Location: Shall not be closer than 1,000 linear feet from the nearest check cashing, title loan, pawn shop, or other similar establishment, as determined by the Administrator. g. Commercial Day Care Center 1. Minimum Lot Area: 20,000 square feet 2. Indoor Area: The building shall contain a minimum of 35 square feet of floor area for each child, based on maximum enrollment. 3. Playground: Outdoor playground equipment is required. All outdoor play areas shall be enclosed by a fence or wall no less than 4 feet in height and shall form the defined perimeter of the play area. Any access points along the fence or wall shall be locked. No play areas shall be permitted in the side or front yard. h. Convenience Store 1. As an Accessory Use: Shall be permitted in Automobile Service Stations. 2. Applicable to Rural Agricultural (RA) and Rural Residential (RR): a. Size: 10,000 sq. ft. maximum gross floor area. b. Emergency Services: Shall demonstrate that the use is serviceable by emergency services to include ambulatory, fire, and police. 50 c. Operation: May include the processing of wild game, as defined by the South Carolina Department of Natural Resources (DNR), however the area dedicated to processing shall not exceed 25% of the gross floor area of the use. This shall not be misconstrued as meat processing or food processing facility as defined by the State of South Carolina. Encouraged to sell recreational items that relate to the natural amenities of surrounding areas such as kayaks, fishing poles, camping supplies, and other similar products. i. Drive-in Theaters 1. Lighting and Noise : The applicant shall submit documents that demonstrate that the adjacent properties will not be negatively affected by the operation of this use. These documents may be photometric or noise study conducted by a professional with experience within this field. 2. Surface: The surface materials of the use may be made of a pervious material, unless otherwise prevented by the stormwater regulations of the Town. 3. Concessions: Beverages and food service may be an accessory use. 4. Site Plan: The applicant shall submit a site plan detailing parking, landscaping, location of utilities, vehicular and pedestrian circulation paths, and other details as requested by the Administrator. j. Dry Cleaning 1. Storage: No outdoor storage or displays are permitted 2. Truck Loading or Delivery Areas: All areas for the purposes of loading, unloading, and deliveries shall be located in the rear of the use and be screened from adjoining properties. k. Funeral Homes 1. Applicable to Rural Agricultural (RA) and Rural Residential (RR): a. Accessory Use: May have an attached crematory, however it shall not be more than 25% of the gross floor area of the funeral home b. Maximum Size: 10,000 sq. ft. l. General Retail 1. Truck Loading or Delivery Areas: All areas for the purposes of loading, unloading, and deliveries shall be located in the rear of the use and be screened from adjoining properties. 2. Applicable to Rural Agricultural (RA) and Rural Residential (RR) a. Size: 10,000 sq. ft. maximum gross floor area m. Hardware Store 1. Applicable to Village Center (VC): No outdoor storage of materials, equipment, or vehicles permitted. Items for sale may be permitted against the exterior walls of the use, however it shall not obstruct any pedestrian sidewalks or vehicular circulation. n. Hotels or Motels 1. Accessory Uses: Permitted to have any accessory use that is otherwise allowed in the zoning district in which the principal use is located. 2. Types of Accessory Uses: Uses accessory to Hotels shall be bars, restaurants, salons, gyms, and other compatible uses that retain the character of the district 3. Location of Accessory Uses: Shall be located on the first floor and have their own separate means of ingress, unless specifically for the utilization of hotel guests. Rooftop, waterfront, or other type of accessory uses that take advantage of scenic views 51 or natural features shall be permitted, as long as there is no conflict with other regulations within this Ordinance. 4. Operation: No hourly rates shall be permitted. Overnight, weekly, or monthly rates are permitted. 5. Applicable to Rural Agricultural (RA) and Rural Residential (RR): a. Size: 10,000 sq. ft. maximum gross floor area b. Operation: No hourly rates shall be permitted. Overnight, weekly, or monthly rates are permitted. c. Emergency Services: Shall demonstrate that the use is serviceable by emergency services to include ambulatory, fire, and police. o. Liquor Stores 1. Location: Shall not be located within 500 linear feet of a church or school, except when located within a Town Center (TC). Shall not be located within 1,000 linear feet of another liquor store. p. Microbrewery, Micro-Distillery, Micro-Winery 1. Location: Shall not be located within 1,000 linear feet of a church or school, except within a Rural Agricultural (RA) and Rural Residential (RR) Districts. 2. Outdoor Recreation: All play areas or outdoor seating areas shall have a defined perimeter. Areas adjacent to roadways or vehicular circulation shall be protected by a fence, vegetation, or combination thereof without obstructing sight triangles. 3. Accessory Uses: May be permitted to have a commercial kitchen that is compliant with all food safety, building, and fire codes. 4. Applicable to Rural Agricultural (RA) and Rural Residential (RR): a. Size: 10,000 sq. ft. maximum gross floor area b. Agricultural Component: At least 5% or 150 sq. ft., whichever is greater, shall be dedicated to the growing of agricultural produce such as wheat, barley, grapes, herbs, or other produce that is non-invasive. q. Miniature Golf Courses 1. Operation: Shall not operate between the hours of 12:01 a.m. and 6:00 a.m. of any day. 2. Lighting and Noise: Lighting shall comply with the requirements in Article 8. The use shall comply with the noise ordinance of the Town. Lighting within the course shall be shielded and contained to the course as to not spillover to adjacent properties or become a traffic hazard. The Administrator may require a photometric plan if deemed necessary 3. Buffer: Shall have a street buffer in accordance with Section 7.5.5. 4. Course Design: Structures, characters, vegetation or other decorative elements shall reflect historical or cultural elements of the Town, Region, or State. The course shall be designed with proper safety measures to include, but not limited to, perimeter fencing, barriers around water features, and appropriate interior signage. r. Office, Medical and Non-Medical 1. Applicable to Rural Agricultural (RA) and Rural Residential (RR): a. Size: 10,000 sq. ft. maximum gross floor area. s. Office Building 1. Minimum Lot Size: 1 acre 52 2. Accessory Uses: An office building may have accessory uses, such as a salon, convenience store, electrical vehicle charging stations, restaurants and other accessory uses that serve the needs of the building’s occupants. 3. Applicable to Rural Agricultural (RA) and Rural Residential (RR): a. Size: 10,000 sq. ft. maximum gross floor area t. Outdoor Display and Sales 1. Applicable to Rural Agricultural (RA) and Rural Residential (RR): a. Location: Shall be setback at least 50 feet from the road, or placed behind an existing building. b. Design: Shall be placed on a site that is sufficiently improved to withstand the load of stored materials and vehicles. c. Site Plan: A site plan shall be required showing the areas of outdoor storage and sales to ensure pedestrian and vehicular circulation. d. Operation: Outdoor storage as a principal use is not permitted. u. Parking Lots 1. Design: Shall comply with all standards in Article 6. 2. Applicable to Town Center (TC) and Village Commercial (VC): Shall not be located adjacent to an existing property utilized as a parking lot as its principal use. 3. Applicable to Rural Agricultural (RA) and Rural Residential (RR): a. Size: Shall not exceed 20 spaces b. Storage: Shall be kept free of storage of inoperable vehicles when a parking lot is the principal use for the property. When parking lots are associated with another primary use, it may be permitted for vehicle storage, however it shall be fully enclosed and screened from view with vegetation, fencing, or combination thereof. c. Design: Shall be composed of either asphalt, concrete, or pervious materials that can withstand the load of its intended use. v. Personal Service 1. Applicable to Rural Agricultural (RA) and Rural Residential (RR): Permitted as an accessory use, and shall follow the regulations for Home Occupations in Section 4.5.3.n. w. Pet Boarding 1. Location: All cages or kennels for animals shall be located in the rear of the building. 2. Screening: All kennels shall be opaquely screened from the public right-of-way and adjacent properties. Areas reserved for the exercise and play of animals shall be defined by a 6 feet wall or fence. 3. Operation: Outdoor activity is permitted during daylight hours, animals must be boarded indoors at night. 4. Compliance with other codes and regulations: Applicant shall comply with all other Town, County, State, and Federal Regulations. (Code of Ordinances Town of Chapin, 3.102) 5. Applicable to Town Center (TC) and Village Commercial (VC): All animals shall be within the building. Outdoor kennels are not permitted. x. Restaurant, Full Service 1. Applicable to Rural Agricultural (RA) and Rural Residential (RR): a. Size: 10,000 sq. ft. maximum gross floor area b. Design: No flat or parapet roofs. Minimum roof pitch shall be 4:12. y. Specialty Retail 53 1. Applicable to Rural Agricultural (RA) and Rural Residential (RR): a. Size: 10,000 sq. ft. maximum gross floor area b. Emergency Services: Shall demonstrate that the use is serviceable by emergency services to include ambulatory, fire, and police. c. Operation: May include the processing of wild game and animals to include deer, cows, pigs, chickens, fish, and fowl, however the area dedicated to processing shall not exceed 25% of the gross floor area of the use. This shall not be misconstrued as meat processing or food processing facility as defined by the State of South Carolina. Encouraged to sell recreational items that relate to the natural amenities of surrounding areas. z. Tattoo Parlor 1. Location: Shall not be located within 1,000 linear feet of a church or school, except when located within Town Center (TC) or Village Commercial (VC). aa. Tobacco Stores 1. Location: Shall not be closer than 1,000 linear feet from the nearest tobacco store 2. Operation: Shall be permitted to operate as a cigar bar (as defined in the NAICS code).. bb. Vape Store 1. Location: Shall not be located closer than 3,000 linear feet from the nearest vape store, school, or place for religious assembly. cc. Veterinarian 1. Animal Boarding: The keeping of any animals overnight shall be permitted if the animal is kept indoors. 2. Applicable to Town Center (TC) and Village Commercial (VC): Overnight animal boarding is not permitted unless completely inside a building. 3. Applicable to Rural Agricultural (RA) and Rural Residential (RR): Animal Boarding shall follow all Home Occupation standards in Section 4.3.2.n. 4.4.4. Institutional-Civic-Public Uses a. Amphitheaters, Outdoor 1. Operation: The use shall only operate between 8:00am and 10:00pm unless a noise ordinance waiver is granted by the Town of Chapin. 2. Lighting and Noise: The operation of this use shall adhere to the noise ordinance of the Town. All lighting shall be design to be sufficiently shielded and directed as to prevent spillover to adjacent properties. The Administrator may require a photometric plan if deemed necessary. b. Cemetery and Mausoleums 1. Lot Size: Minimum lot size of 1 acre. c. Civic and Social Organizations 1. Operation: Shall not disrupt the character of the district. 2. Applicable to Suburban Residential 3 (SR3), Town Residential 1 (TR1), Town Residential 2 (TR2), and Town Residential 3 (TR3) Districts: The applicant shall demonstrate the need for the proposed use to the Administrator and Zoning Review Board with a narrative. d. Colleges, Universities, Vocational Schools, and Private Schools 1. Site Plan: A master plan for the campus is required. The use is compatible with the district, and adequate provisions for the preservation and use of open space. 2. Need: Documentation from the local school board or other accredited educational institution or authority detailing the need for this use in its proposed location. 54 e. Farmers Market, Indoor and Outdoor 1. Permit Required: All vendors within an authorized farmer’s market shall obtain all applicable licenses to operate within the State of South Carolina and Town of Chapin. 2. Operation: Shall operate between 6 a.m. and 10 p.m. and shall be on Saturday and Sunday unless otherwise approved by the Town. 3. Hours of Operation: Sales shall be conducted within the property or properties, and shall not obstruct any areas intended for the circulation of pedestrians or vehicles. f. Government Building or Facility 1. Size: Shall be limited to a 4,000 square foot building footprint within Suburban Residential 1 (SR1) zoning district. 2. Demonstration of Need: The applicant shall provide all necessary documentation demonstrating the need for the proposed facility as prepared by a person experienced in the same field. (Ex: Chief of Police or County Sheriff proposing new police substation) a. Exemptions: Police, Fire or Ambulatory stations are exempt from these standards. g. Hospitals 1. Applicable to Rural Agricultural (RA) and Rural Residential (RR): a. Size: 15,000 sq. ft. maximum gross floor area b. Licensing: Shall have all Federal and State licenses. c. Need: Shall provide documentation detailing demand or need of healthcare facilities. h. Religious Assembly 1. Minimum Lot Size: 20,000 sq. ft. 2. Setbacks: Principal building at least 25 feet from adjacent residentially zoned properties. 3. Accessory Uses: Day cares, Sunday schools, and preschools are allowable accessory uses. 4. Applicable to Town Center (TC) and Village Commercial (VC): Distance requirements from bars, tobacco stores, tattoo parlors, and other similar uses do not apply. i. Theater 1. Operation: The use shall only operate between 8:00am and 10:00pm unless a noise ordinance waiver is granted by the Town. Indoor shows or events are exempted from this requirement. 2. Lighting and Noise: No speaker or lighting fixture shall negatively affect any adjacent residential property. The use shall comply with applicable lighting standards and noise ordinance. Theater search lights as a decoration may be used as long as the applicant demonstrates compliance with applicable Federal, State, and Local laws. Additionally, search lights shall not be directed at ground level, any buildings or structures, or any vehicles. 4.4.5. Industrial Uses a. Heavy Equipment Rental 1. Parking of Vehicles: No vehicles or equipment shall be stored on an unimproved surface, required buffer, berm, or landscaping feature. No vehicle shall be elevated for the purposes of advertising, by any means, above the parking grade. Vehicles for repair shall be stored in the rear or side, screened from the public right of way, and adjacent property. No vehicle undergoing repair services, under any circumstance, should be on- site for more than 90 days. 55 a. Exceptions: The Administrator may grant a waiver to these standards when the use is located within Rural Agricultural (RA) or Rural Residential (RR) districts. 2. Service Bay Doors: Repair of vehicles or boats shall occur within an enclosed building. Service bay doors shall not be visible from the public right-of-way. If service bay doors face a residential property, they shall be opaquely screened from view 3. Screening: All vehicles and equipment being stored overnight on-site shall be located in the rear or side and opaquely screened or located not to be visible from the public right- of-way. b. Repossession Services 1. Storage of Equipment and Vehicles: No storage of vehicles or equipment shall be in the front yard, or between the buildings and a public right-of-way. 2. Screening: All vehicles and equipment being stored overnight on-site shall be opaquely screened or located not to be visible from the public right-of-way. 3. Security: The applicant shall submit a site plan that includes the location and specification of video surveillance equipment, sufficient screening, and perimeter security. Additionally, the applicant shall be required to employ or have a contract with a license security professional 24 hours a day, seven day a week. c. Telecommunication Facility 1. Shall adhere to the standards in Section 4.7 d. Truck Sales and Service 1. Storage of Equipment and Vehicles: No storage of vehicles or equipment shall be in the front yard, or between the buildings and a public right-of-way. 2. Screening: All vehicles and equipment being stored overnight on-site shall be opaquely screened or located not to be visible from the public right-of-way. e. Warehouse 1. Loading Bays: All bays used for truck delivery or loading shall be on the rear of the building. In the case where this is not possible, loading areas may be oriented toward the side, however no loading area shall be visible from the public right-of-way. 2. Outdoor Storage: All supplies, non-operable vehicles, and equipment shall be stored in the rear of the building. No storage is permitted between the building and the public right-of-way. 4.5. Accessory Uses and Structures 4.5.1. Accessory Use Permissions Defined This Section authorizes the establishment of accessory uses and structures that are incidental and customarily subordinate to principal uses. The Town’s intent in adopting this section is to allow a broad range of accessory uses. Such uses shall be located on the same site as the principal use and shall comply with the standards set forth in this section in order to reduce potentially adverse impacts on surrounding lands. 4.5.2. Accessory Use Table (ACCESSORY USE TABLE ON NEXT PAGE) 56 T a b l e 4 . 5 . 2 – A c c e s s o r y U s e T a b l e T y p e o f A c c e s s o r y U s e RA RR S R 1 S R 2 S R 3 TR1 TR2 TR3 VC TC PI CC IC OC LI PO A c c e s s o r y D w e l l i n g U n i t P P P P P C C A u t o m a t e d T e l l e r M a c h i n e ( A T M ) P P P P P P B e e k e e p i n g P P C C B o a t h o u s e a n d / o r d o c k C C C C C C C a r e t a k e r D w e l l i n g SE SE SE P C a r p o r t P P P P P P P SE SE C h i c k e n C o o p * P P P P P SE SE SE SE Co - l o c a t i n g f o r a n t e n n a e ( o n a s t r u c t u r e ) SE SE SE SE SE C C C P D e c k o r P a t i o P P P P P P P P P P P P P P D r i v e - T h r o u g h W i n d o w SE C C C C E l e c t r i c a l V e h i c l e C h a r g i n g S t a t i o n SE P P P P P P G a r a g e d e t a c h e d P P P P P P P P P P P P P P G a r a g e , a t t a c h e d P P P P P P P P P P P P P P G a z e b o P P P P P P P P P P P P P G r e e n h o u s e P P P P P P P SE SE P H o m e O c c u p a t i o n P P C C C C C C C C C O u t d o o r D i s p l a y / S a l e s C C SE C C O u t d o o r S t o r a g e f o r E q u i p m e n t o r M a t e r i a l s SE P P a r k i n g L o t s SE SE P P P P o r c h P P P P P P P P P P P P P P P r i v a t e S t a b l e P P SE S h e d P P C C C C C C C SE P C C P P S o l a r E n e r g y S y s t e m P P P P P P C C C C C C C C C SE S w i m m i n g P o o l P P P P P P P P SE SE P P 57 4.5.3. Accessory Use Standards a. Accessory Dwelling Unit 1. Location: Shall be located in the rear. May be constructed above an existing attached or detached garage, if compliant with all other regulations. 2. Size: Shall not be larger than 50% of the gross floor area of the principal use, or 1,500 square feet, whichever is smaller. Shall have a minimum size of 240 square feet. b. Automated Teller Machine (ATM) 1. Location: Shall be located within or on the exterior façade of the principal use. For pedestrian accessible machines, it is encouraged to place adjacent to existing sidewalk connection. 2. Accessory: Shall only be an accessory to a use. ATMs shall not be considered a principal use. 3. Design: The Administrator may request that the applicant demonstrate compliance with Crime Prevention Through Environmental Design (CPTED) best practices to ensure the health and safety of users. c. Beekeeping 1. Location: Shall be located in the rear yard, and shall not create a nuisance to adjacent uses. The owner shall live on premises where bees are kept. No colony shall be within 30 feet of adjacent buildings on adjacent lots. 2. Size: Shall be a maximum of five colonies, each with one queen, except within RA or RR Zoning Districts. 3. Design: A flyway barrier of at least 6 feet in height is required, composed of a fence, wall or opaque vegetations, unless the structures containing bee hives are 80’ from the nearest property line. The walls of the barrier shall be oriented towards adjacent uses and buildings. An on-site freshwater source shall be located within 15 feet of the structure. 4. Operation: Swarm management techniques shall be implemented. However, such swarm management techniques for potentially hostile hives, including elimination of the hive, shall be made by an authorized or accredited third party. The owner shall retain documentation pertaining to the elimination of a hive for inspection by the Town or applicable agency. d. Boat House and Dock 1. Permit Required: Shall receive all relevant permits and approvals from Federal, State, or Local agencies prior to construction. e. Caretaker Dwelling 1. Location: Shall be located on the same premises with the principal use for which it is required. 58 2. Number: No more than one residence on the property, and shall be occupied by owners or employees of the use for which it is required. 3. Design: Shall be constructed so that the exterior of the premises provides a style consistent with the principal structure. Manufactured homes shall not be used as a Caretaker’s Dwelling, unless a special exception is granted by the Board of Zoning Appeals. f. Carport 1. Location: Shall be located on the side or rear of the principal structure. No portion of the carport shall be placed in front of the principal structure. 2. Design: Shall be composed of materials that are found on the principal structure. The roof of the carport may be used for a Solar Energy System. If the carport is used for storage, other than an operable vehicle, it shall be fully enclosed and not visible from the public right-of- way. No prefabricated or pre-manufactured metal structures are permitted. a. Exceptions: Carports in the RR, RA, and SR1 district may be prefabricated or pre-manufactured. g. Chicken Coop 1. Permit Required: Requires a Zoning Permit from Administrator. The owner of the chicken coop shall live on premises. No commercial off- premise activity is permitted. 2. Maximum Allowed: No roosters shall be permitted, except in Rural Agricultural (RA) and Rural Residential (RR). A maximum of 4 female chickens, quail, peahens, or ducks, except within RA and RR. A minimum of two square feet per domesticated female chicken shall be provided for the chicken coop. Invasive species are not permitted 3. Coop Required: Must be confined in a coop which is fully enclosed with a solid floor and made of suitable, washable material. The coop shall be cleaned regularly with all droppings and excretions placed in a flyproof container. The chicken coop and fenced enclosure must provide adequate ventilation and adequate sun, shade and must be constricted in a manner to resist access by rodents, wild birds and predators including dogs and cats. Chicken coops shall be enclosed on all sides and shall have a roof and doors. Opening windows and vents must be covered with predator- and bird-resistant wire of less than one-inch openings. 4. No slaughtering of fowl is permitted on premises 5. All stored food for the domesticated female chickens must be kept either indoors or in a weather-resistant container designed to prevent access by animals. Uneaten food shall be removed daily. h. Deck or Patio 1. Location: Shall be located in the side or rear of the principal use. Patios or Decks associate with a commercial use may be incorporated within 59 the front entrance, but only when approved by the Architectural Review Board. 2. Materials: Shall be composed of materials found on the principal use. i. Drive-through 1. Applicability: Shall apply to all drive-through uses to include but not limited to signage, pick-up and service windows, and lane design. 2. Location: Drive-through, pick-up, or service windows shall be located on the side or rear of the principal use, and shall not face any public right-of-way. Menus shall be located on the side, secondary frontage, or rear of the building. 3. Drive-through lanes design: Lanes shall not be enclosed or bordered by curbs or any physical barrier as it restricts vehicular access. Lanes are encouraged to circulate behind or around the side of the principal use, however may circulate between the building and the primary frontage if adequate screening is provided in the form of a knee wall and/or an appropriate amount of landscaping to screen the lane from the public right-of-way. 4. Stacking: If a stacking lane is designed to handle 6 vehicles or more, the applicant shall provide documentation to the Administrator showing how the stacking of vehicles shall be contained on-site during peak hours. j. Electrical Vehicle Charging Station 1. Applicability: Charging stations for private dwellings are exempt from these standards. 2. Examples: EV Charging stations shall be an accessory for automobile service stations in combination with fuel pumps, commercial developments, parking lots, parking garages, and other uses determined by the Administrator. k. Garages 1. Attached a. Design: Shall not be composed of a prefabricated or pre- manufactured metal structure. Garages shall be composed of materials and design that complements the principal structure. b. Location: Shall be located on the side or rear of the principal structure c. Size: A maximum of two bays may face the public right-of-way, additional bays shall be perpendicular to the right-of-way. Garages shall not exceed the height of the principal structure. 2. Detached a. Design: Shall not be composed of a prefabricated or pre- manufactured metal structure. Garages shall be composed of materials and design that complements the principal structure. Detached garages within the RR and RA zoning district are exempt from this requirement 60 b. Location: Shall be located in the rear or side of a principal structure. Shall be setback completely behind the principal structure. l. Gazebo 1. Location: Shall be located in the rear or side of a principal use. 2. Design: Shall not be used for parking of vehicles. If used for storage, other than patio furniture or similar items, any side visible from an adjacent property shall be enclosed or opaquely screened. m. Greenhouse 1. Location: Shall be located in the rear or side of the principal use, and shall be located completely behind the principal use. 2. Storage: May not be used for storage of items or materials unrelated to the care of plants and/or flowers. 3. Maintenance: Shall be kept in good condition and free from invasive species. n. Home Occupation 1. The following uses are not permitted as home occupations: a. Vehicle or Equipment Repair or Service b. Restaurant or Bars c. Animal Boarding facilities d. Lodging, unless an approved short-term rental or bed and breakfast e. Medical offices f. Tattoo parlor or body piercing g. Any other use determined by the Administrator that would negatively affect the surrounding neighborhood, such as noxious noise, smells, sights, or similar negative affect to the senses. 2. Operation: The following shall be requirements for all Home Occupations: a. Shall be conducted inside dwelling by resident family members b. Utilizes not more than 25% of total dwelling floor area c. No change in exterior appearance of dwelling d. No outside display of products e. No sale of products conducted at the site of the home occupation f. Creates no health or safety hazard, noise, offensive emission, traffic hazard, unsightly conditions or nuisance g. No signage is permitted. h. No commercial vehicles, as outlined in Section 8.3.6, are permitted o. Outdoor Display or Sales 1. Location: Shall not obstruct any sidewalk, egress, ingress, nor areas where vehicles or pedestrian circulate. 2. Permit Required: Shall provide information regarding to time period, location, type of products, and other information deemed necessary by Administrator prior to a Zoning Permit being issued. p. Outdoor Storage for Equipment or Materials 61 1. Location: Storage for equipment and materials shall only be permitted in the Light Industrial (LI) district. Permitted uses conducting vehicle sales are exempt from this requirement. 2. Design: Equipment and materials shall be stored in the rear or a non- visible side of the property. Any equipment or materials that are being stored shall not be visible from the public right-of-way. q. Parking Lots 1. Location: Shall not be located between the principal façade and principal street frontage within the Village Commercial and Town Center districts. r. Porch 1. Location: Shall be located on the front, side, or rear elevation of a principal use. 2. Design: Shall be composed of materials found on the principal use. Porches shall be encouraged to have equally spaced columns and openings. Additionally, porches are encouraged to center door and window openings within the column openings. 3. Size: The minimum width of a front porch shall not be less than 25% of the width of the front façade of the principal structure. Side and rear porch widths shall be 25% of which the porch is constructed on. Side and rear porches are exempt from this requirement if they are not visible from the public right-of-way. s. Private Stable 1. Location: Only permitted in the RR or RA zoning District. Can be located in front of principal building, if compliance with all other setbacks 2. Setback: Shall be setback at least 200 feet away from adjacent buildings on adjacent properties. 3. Operation: Shall only be used for the housing of horses owned by the person residing on the property. t. Shed 1. Location: Shall be located in the rear or non-visible side of the property. 2. Design: Shall not be a premanufactured or prefabricated metal building. Shall be composed of materials that are present on the principal use. a. Exceptions: Sheds within the RR and RA zoning district are exempt from this requirement. u. Solar Energy System 1. Location: Shall only be installed on a roof or canopy. Shall be installed on roof slopes not visible from public right of way. v. Swimming Pool Location: Shall be located within the rear or side yard. Shall be completely screened with a fence or wall from the public right-of-way and adjacent properties. 62 4.6. Sexually Oriented Businesses 4.6.1. Purpose and Intent It is the purpose of this section to regulate sexually-oriented businesses to promote the health, safety, morals, and general welfare of the citizens of the Town of Chapin, and to establish reasonable and uniform regulations to prevent the continued deleterious location and concentration of sexually-oriented businesses within the town. The provisions of this section have neither the purpose nor effect of imposing a limitation or restriction on the content of any communicative materials including sexually-oriented materials. Similarly, it is not the intent or effect of this Ordinance to restrict or deny access by adults to sexually oriented materials protected by the First Amendment, or to deny access by the distributors and exhibitors of sexually-oriented entertainment to their intended market. Neither is it the intent nor effect of this section to condone or legitimize the distribution of obscene material. 4.6.2. Definitions a. Adult arcade means any place to which the public is permitted or invited wherein coin-operated or slug-operated or electronically, electrically, or mechanically controlled still or motion picture machines, projectors, or other image-producing devices are maintained to show images to five (5) or fewer persons per machine at any one time, and where the images so displayed are distinguished or characterized by the depicting or describing of “certain sexual activities” or “specified anatomical areas”. b. Adult bookstore or adult video store means a commercial establishment which, as one of its principal business purposes, offers for sale or rental for any form of consideration any one or more of the following: 1. Books, magazines, periodicals or other printed matter, or photographs, films, motion pictures, video cassettes, or video reproductions, slides, or other visual representations which depict or describe “specified sexual activities” or “specified anatomical areas”; or 2. Instruments, devices, or paraphernalia which are designed for use in connection with “specified sexual activities.” A commercial establishment may have other principal business purposes that do not involve the offering for sale or rental of material depicting or describing “specified sexual activities” or “specified anatomical areas” and still be categorized as adult bookstore or adult video store. Such other business purposes will not serve to exempt such commercial establishment from being categorized as an adult bookstore or adult video store so long as one of its principal business purposes is the offering for sale or rental for consideration the specified materials which depict or describe “specified sexual activities” or “specified anatomical areas”. c. Adult cabaret means a nightclub, bar, restaurant or similar commercial establishment which regularly features: 1. Persons who appear in a state of nudity; or 2. Live performances which are characterized by the exposure of “specified anatomical areas” or by “specified sexual activities”; or 63 3. Films, motion pictures, video cassettes, slides, or other photographic reproductions which are characterized by the depiction or description of “specified sexual activities” or “specified anatomical areas”. d. Adult motel means a hotel, motel or similar commercial establishment: 1. Offers accommodations to the public for any form of consideration; provides patrons with closed-circuit television transmissions, films, motion pictures, video cassettes, slides, or other photographic reproductions which are characterized by the depiction or description of “specified sexual activities” or “specified anatomical areas”; and has a sign visible from the public right-of-way which advertises the availability of this adult type or photographic reproductions; or 2. Offers a sleeping room for rent for a period of time that is less than ten (10) hours; or 3. Allows a tenant or occupant of a sleeping room to sub rent the room for a period of time that is less than ten (10) hours. e. Adult motion picture theater means a commercial establishment where, for any form of consideration, films, motion pictures, video cassettes, slides, or similar photographic reproductions are regularly shown which are characterized by the depiction or description of “specified sexual activities” or “specified anatomical areas”. f. Adult theater means a theater concert hall, auditorium, or similar commercial establishment which regularly features persons who appear in a state of nudity or live performances which are characterized by the exposure of “specified anatomical areas” or by “specified sexual activities”. g. Escort means a person who, for consideration, agrees or offers to act as a companion, guide, or date for another person, or who agrees or offers to privately model lingerie or to privately perform a striptease for another person. h. Escort Agency means a person or business association who furnishes, offers to furnish, or advertises to furnish escorts as one of its principal business purposes for a fee, tip, or other consideration. i. Establishment means and includes any of the following: 1. The opening or commencement of any sexually-oriented business as a new business; 2. The conversion of an existing business, whether or not a sexually-oriented business, to any sexually-oriented business; 3. The additions of any sexually-oriented business to any other existing sexually- oriented business; or 4. The relocation of any sexually-oriented business. j. Permittee and/or licensee means a person in whose name a permit to operate a sexually-oriented business has been issued, as well as the individual listed as an applicant on the application for a permit. k. Nude Model Studio means any place where a person who appears in a state of nudity or displays “specified anatomical area” is provided to be observed, sketched, 64 drawn, painted, sculptured, photographed, or similarly depicted by other persons who pay money or any form of consideration. l. Nudity or a state of nudity means the appearance of a person’s genitals, pubic area, vulva, anus, anal cleft or cleavage or buttocks or any simulation thereof; or any portion of a female breast below the horizontal line across the top of the areola at its highest point or any simulation thereof. The definition shall include the appearance of any portion of the entire lower portion of the female breast. m. Person means an individual, proprietorship, partnership, corporation, association, or other legal entity. n. Semi-nude means a state of dress in which clothing covers no more than the genitals, pubic region, and areola of the female breast, as well as portions of the body covered by supporting straps or devices. o. Sexual encounter center means a business or commercial enterprise that, as one of its principal business purposes, offers for any form of consideration: 1. Physical contact in the form of wrestling or tumbling between persons of the opposite sex; or 2. Activities between male and female persons and/or persons of the same sex when one or more of the persons is in a state of nudity or semi-nude. p. Sexually-oriented business means an adult arcade, adult bookstore or adult video store, adult cabaret, adult motel, adult motion picture theater, adult theater, escort agency, nude model studio, or sexual encounter center. q. Specified anatomical areas means the male genitals in a state of sexual arousal and/or the vulva or more intimate parts of the female genitals. r. Specified sexual activities means and includes any of the following: 1. The fondling or other erotic touching of human genitals, pubic region, buttocks, anus or female breasts; 2. Sex acts, normal or perverted, actual or simulated, including intercourse, oral copulation, or sodomy; 3. Masturbation, actual or simulated; 4. The fondling, erotic touching, or other such contact with an animal by a human being; or 5. Excretory functions as part of or in connection with any of the activities set forth in 1 through 4 above. s. Substantial enlargement of a sexually-oriented business means the increase in floor areas occupied by the business by more than twenty-five (25) percent, as the floor areas exist. t. Transfer of ownership or control of a sexually-oriented business means and includes any of the following: 1. The sale, lease, or sublease of the business; 2. The transfer or securities which constitute a controlling interest in the business, whether by sale, exchange, or similar means; or 3. The establishment of a trust, gift, or other similar legal device which transfers the ownership or control of the business. 65 4.6.3. Classification a. Sexually-oriented businesses are classified as follows: 1. Adult arcades; 2. Adult bookstores or adult video stores; 3. Adult cabarets; 4. Adult motels; 5. Adult motion picture theaters; 6. Adult theaters; 7. Escort agencies; 8. Nude model studios; and 9. Sexual encounter centers. 4.6.4. Permit Required a. Operation of a sexually-oriented business requires a valid permit from the Town of Chapin for the particular classification of business. b. An application for a permit must be made on a form provided by the Town of Chapin zoning department. The application must be accompanied by a sketch or diagram showing the configuration of the premises, including a statement of the total floor space occupied by the business. The sketch or diagram need not be professionally prepared but must be drawn to a designated scale or drawn with marked dimensions of the interior of the premises to an accuracy of plus or minus six (6) inches. c. The applicant must be qualified according to the provisions of this chapter and the premises must be inspected and found to be in compliance with the law by the health department, fire department, and building official. The health department, fire department and building office shall complete their inspections and certify same to the Administrator within twenty-one (21) days of receipt of the application by said Administrator. d. If a person who wishes to operate a sexually-oriented business is an individual, he must sign the application for a permit as applicant. If a person who wishes to operate a sexually-oriented business is other than an individual, each individual who has a ten (10) percent or greater interest in the business must sign the application for a permit as applicant. If a corporation is listed as owner of a sexually-oriented business or as the entity which wishes to operate such a business, each individual having a (10) percent or greater interest in the corporation must sign the application for a permit as applicant. e. The fact that a person possesses other types of state, or Town of Chapin permits and/or licenses does not exempt that person from the requirement of obtaining a sexually-oriented business permit. 4.6.5. Issuance of Permit and Fee a. The Town Administrator shall approve the issuance of a permit to an applicant within thirty (30) days after receipt of an application unless any one or more of the following is found to be true: 66 1. An applicant is under eighteen (18) years of age; 2. An applicant is overdue payment to the Town of Chapin for taxes, fees, fines, or penalties assessed or imposed in relation to a sexually-oriented business; 3. An applicant has failed to provide information reasonably necessary for issuance of the permit or has falsely answered a question or request for information on the application; 4. An applicant is residing with a person who has been denied a permit by the Town of Chapin to operate a sexually-oriented business within the preceding twelve (12) months, or residing with a person whose license to operate a sexually-oriented business has been revoked within the preceding twelve (12) months; b. The premises to be used for the sexually-oriented business have not been approved by the health department, fire department, and the building official as being in compliance with applicable laws and ordinances; c. The permit fee required by this Ordinance has not been paid; d. An applicant of the proposed establishment is in violation of or is not in compliance with any of the provisions of this Ordinance; or e. The permit, if granted, shall state on its face the name of the person or persons to whom it is granted, the expiration date, and the address of the sexually oriented business. The permit shall be posted in a conspicuous place at or near the entrance to the sexually-oriented business so that it may be easily read at any time. f. The annual fee for a sexually-oriented business permit is five hundred dollars ($500) dollars. 4.6.6. Inspection a. An application of permittee shall permit representatives of the law enforcement department, health department, fire department, zoning department or any other Town of Chapin departments or agencies to inspect the premises of a sexually- oriented business for the purpose of ensuring compliance with the law, at any time it is occupied or open for business. b. A person who operates a sexually-oriented business or his agent or employee commits a misdemeanor if he refuses to permit such lawful inspection of the premises at any time it is occupied or open for business. 4.6.7. Expiration of Permit a. Each permit shall expire one year from the date of issuance and may be renewed only by making application as provided in Section 4.6.4. Application for renewal should be made at least thirty (30) days before the expiration date, and when made less than (30) days before the expiration date, the expiration of the permit will not be affected. b. When the Administrator denies renewal of a permit, the applicant shall not be issued a permit for one (1) year from the date of denial. If subsequent to denial, the Administrator finds that the basis for denial of the renewal permit has been 67 corrected or abated, the applicant may be granted a permit if at least ninety (90) days have elapsed since the date of denial became final. 4.6.8. Suspension of Permit a. The Administrator may suspend a permit for a period not to exceed thirty (30) days if it is determined that a permittee and/or licensee or an employee of a permittee and/or licensee has: 1. Violated, or is not in compliance with any section of this Ordinance; or 2. Engaged in excessive use of alcoholic beverages while on the sexually- oriented business premises; or 3. Refused to allow an inspection of the sexually-oriented business premises as authorized by this chapter; or 4. Knowingly permitted gambling by any person on the sexually-oriented business premises. 4.6.9. Revocation of Permit a. The Administrator shall revoke a permit if it is determined that: 1. A permittee and/or his licensee knowingly gave false or misleading information in the material submitted to the zoning department during the application process; or 2. A permittee and/or licensee or an employee has knowingly allowed possession, use, or sale of controlled substances on the premises; or 3. A permittee and/or licensee or an employee has knowingly allowed prostitution on the premise; or 4. A permittee and/or licensee or an employee knowingly operated the sexually- oriented business during a period of time when the permittee’s and/or licensee’s permit was suspended; or 5. A permittee and/or licensee or an employee has knowingly allowed any act of sexual intercourse, sodomy, oral copulation, masturbation or other sexual conduct to occur in or on the permitted and/or license premises; or 6. A permittee and/or licensee is delinquent in payments to the Town of Chapin or state for any taxes of fees past due. b. When the Administrator revokes a permit, the revocation shall continue for one (1) year, and the permittee and/or licensee shall not be issued a sexually-oriented permit for one (1) year from the date revocation became effective. If, subsequent to revocation, the Administrator finds that the basis for the revocation has been corrected or abated, the applicant may be granted a permit if at least ninety (90) days have elapsed since the date the revocation became effective. 4.6.10. Transfer of Permit a. A permittee and/or licensee shall not transfer his permit to another, nor shall a permittee and/or licensee operate a sexually-oriented business under the authority of a permit at any place other than the address designated in the application. 68 4.6.11. Location of Sexually-Oriented Businesses a. A sexually-oriented business may be permitted by Special Exception within the Corridor Commercial (CC) and Interstate Commercial (IC) zoning districts. b. A sexually-oriented business shall not be operated within one thousand (1,000) feet of: 1. A church; 2. A public or private elementary or secondary school; 3. A boundary of any residential district; 4. A public park adjacent of any residential use; 5. A day care center; or 6. The property line of a lot devoted to residential use. c. A sexually-oriented business shall not be operated within one thousand (1,000) feet of another sexually- oriented business. d. There shall be no more than one (1) sexually-oriented business in the same building, structure, of portion thereof, or the increase of floor areas of any sexually-oriented business in any building, structure, or portion thereof containing another sexually business. e. For the purpose of this Ordinance, measurement shall be made in a straight line, without regard of intervening structures or objects, from the nearest portion of the building or structure used as a part of the premises where a sexually oriented business is conducted, to the nearest property line of the premises of a church, day care center, or public or private elementary or secondary school, or to the nearest boundary of an affected public park, residential district, or residential lot. f. For purposes of Section 4.6.11.b of this section, the distance between any two (2) sexually-oriented businesses shall be measured in a straight line, without regard to intervening structures or objects, from the closest exterior wall of the structure in which each business is located. g. A sexually-oriented business lawfully operating as a conforming use is not rendered a nonconforming use by the location, subsequent to the grant or renewal of the sexually-oriented business permit, of a church, public or private elementary or secondary school, public park, day care center residential district, or a residential lot with one thousand (1,000) feet of the sexually-oriented business. This provision applies only to the renewal of a valid permit, and does not apply when an application for a permit is submitted after a permit has expired or has been revoked. 4.6.12. Additional Regulations for Adult Motels a. Evidence that a sleeping room in a hotel, motel, or a similar commercial establishment has been rented and vacated two (2) or more times in a period of time that is less than ten (10) hours creates a rebuttable presumption that the establishment is an adult motel as that term is defined in this chapter. b. A person commits a misdemeanor if, as the person in control of a sleeping room in a hotel, motel, or similar commercial establishment that does not have a sexually- oriented permit, he rents or sub rents a sleeping room to a person and, within ten (10) hours from the time the room is rented, he rents or sub rents the same sleeping room again. 69 c. For purposes of this section, the terms “rent” or “sub rent” mean the act of permitting a room to be occupied for any form of consideration. 4.6.13. Regulations for Exhibition of Sexually Explicit Films or Videos a. A person who operates or causes to be operated, a sexually-oriented business, other than an adult motel, which exhibits on the premises in a viewing room of less than one hundred fifty (150) square feet of floor space, a film, video cassette, or other video reproduction which depicts “specified sexual activities” or specified anatomical areas, shall comply with the following requirements: 1. Upon application for a sexually-oriented permit, the application shall be accompanied by a diagram of the premises showing a plan thereof specifying the location of one or more manager’s stations and the location of all overhead lighting fixtures and designating any portion of the premises in which patrons will not be permitted. A manager’s station may not exceed thirty-two (32) square feet of floor area. The diagram shall also designate the place at which the permit will be conspicuously posted, if granted. A professionally prepared diagram in the nature of an engineer’s or architect’s blueprint shall not be required; however, each diagram should be oriented to the north or to some designated street or object and should be drawn to a designated scale or with marked dimensions sufficient to show the various internal dimensions of all areas of the interior of the premises to an accuracy of plus or minus six (6) inches. The Town of Chapin Administrator may waive the foregoing diagram for renewal applications if the applicant adopts a diagram that was previously submitted and certifies that the configuration of the premises has not been altered since it was prepared; 2. The application shall be sworn to be true and correct by the applicant; 3. No alteration in the configuration or location of a manager’s station may be made without the prior approval of the Administrator or his designee; 4. It is the duty of the owners and operator of the premises to ensure that at least one (1) employee is on duty and situated in each manager’s station at all times that any patron is present inside the premises; 5. The interior of the premises shall be configured in such a manner that there is an unobstructed view from a manager’s station of every area of the premises to which any patron is permitted access for any purpose excluding restrooms. Restrooms may not contain video reproduction equipment. If the premises has two (2) or more manager’s stations designated, then the interior of the premises shall be configured in such a manner that there is an unobstructed view of each area of the premises to which any patron is permitted access for any purpose from at least one (1) of the manager’s stations. The view required in this subsection must be by direct line of sight from the manager’s station; 6. It shall be the duty of the owners and operator, and it shall also be the duty of any agents and employees present in the premises, to ensure that the view area specified in subsection (5) remains unobstructed by any doors, walls, merchandise, display racks or other materials at all times and to ensure that no 70 patron is permitted access to any area of the premises which has been designated as an area in which patrons will to be permitted in application filed pursuant to subsection (1) of this section; 7. No viewing room may be occupied by more than one (1) person at any time; 8. The premises shall be equipped with overhead lighting fixtures of sufficient intensity to illuminate every place to which patrons are permitted access at an illumination of not less than one (1) foot candle as measured at the floor level; and 9. It shall be the duty of the owners and operator and it shall also be the duty of any agents and employees present in the premises to ensure that the illumination described above is maintained at all times that any patron is present in the premises. 10. A person having a duty under the above regulations commits a misdemeanor if they knowingly fail to fulfill that duty. 4.6.14. Exemptions a. It is a defense to prosecution that a person appearing in a state of nudity did so in a modeling class operated: 1. By a proprietary school, licensed by the state of South Carolina; a college, junior college, or university supported entirely or partly by taxation; 2. By a private college or university which maintains and operates education programs in which credits are transferable to a college, junior college, or university supported entirely or partly by taxation; or b. In a structure: 1. Which has no sign visible from the exterior of the structure and no other advertising that indicates a nude person is available for viewing; and 2. Where, in order to participate in a class a student must enroll at least three (3) days in advance of the class; and 3. Where no more than one (1) nude model is on the premises at any one (1) time. 4.7. Telecommunication Tower 4.7.1. Purpose The regulations of this section are designed to site communications towers in the Town of Chapin. The regulations in this section are not meant to conflict with any regulations from a Federal or State agency. It is the intent of this article to allow for the co- existence of communications towers and other land uses balanced with reducing the overall negative impact of communications towers by: • Reducing the number of towers by encouraging collocation; and • Encouraging the following the mitigation actions: o The clustering of towers; o The provision of effective screening; and o The location of communications equipment on existing structures. 4.7.2. Dimensional Requirements 71 Table 4.7.2: Telecommunication Tower Dimensional Requirements Districts Maximum Height Setback (from adjacent properties) Rural Agricultural (RA) 400 feet 250 feet Rural Residential (RR) 300 feet 250 feet Public Institutional (PI) 400 feet 100 feet Corridor Commercial (CC) 150 feet 100 feet Interstate Commercial (IC) 150 feet 100 feet Light Industrial (LI) 200 feet 50 feet 4.7.3. Exemptions The following proposed uses shall require only a zoning permit: 4.7.3.1. Colocation. Proposed communications equipment collocating on existing towers and structures without adding to their height. 4.7.3.2. Roof-Mounted Telecommunication Equipment. Antennas mounted on buildings, water tanks or structures other than a free-standing or guyed communications tower and which do not extend more than 30 feet above the highest part of the structure. Minor Modifications to Existing Facilities. Modifications to conforming telecommunications facilities that meet the requirements contained herein such as the addition of accessory equipment. 4.7.4. Tower abandonment and removal. A tower that is not used for communication purposes for more than 120 days (with no new application on file for any communication user) is presumed to be out of service and the owner of such tower must notify Town staff and remove the tower within 50 days. Where an owner does not remove an abandoned tower, the Town will utilize the bond provided as part of Section 4.7.5.l. 4.7.5. Submittal requirements All applications for telecommunications towers shall follow the applicable process as provided in this section. In addition to those requirements, every application must contain the following items: a. A site plan showing the location of the tower guy anchors (if any), existing or proposed buildings and structures or improvements, including parking, driveways or access roads, signage, fences and protected trees affected by the proposed construction. Adjacent land uses shall also be noted on the site plan, with precise measurements noted between the proposed tower and any structures on surrounding properties. b. The site plan must show a vegetated buffer, either existing or proposed, that provides an effective screen from public rights-of-way, adjacent property owners, parks, historic properties, and across view corridors. 72 c. The height and design of the tower, materials to be used, color, and lighting shall be shown on elevation drawings. The applicant shall submit documentation justifying the total height of any communications towers, facility and/or antenna. d. Setback to the proposed tower including the fall zone. The fall zone shall be determined by an engineer certified by the State of South Carolina in a letter which includes the engineer's signature and seal. e. A report from a structural engineer registered in South Carolina showing the tower antenna capacity by type and number, and a certification that the tower is designed to withstand winds in accordance with ANSI/EIAMA 222 (latest version) standards. f. Evidence that a valid FCC license for the proposed activity has been issued. g. The distance between the proposed tower and all other telecommunication facilities serving any property within the Town of Chapin. h. A copy of the tower's search ring. i. To ensure the removal of towers which do not meet requirements for continued use or proper maintenance, a statement of financial responsibility shall be submitted for each tower and a performance bond for the amount of anticipated removal costs shall be posted. The bond must be renewed as necessary to ensure that it is maintained at all times during the existence of the tower. j. The applicant shall furnish a visual impact assessment which shall include: 1. A zone visibility map which shall be provided to determine locations where the tower may be seen from. 2. Pictorial representations of before and after view from key viewpoints both inside and outside the Town including, but not limited to, Major Highways and Road; State and Local Parks; Historic Districts’ Preserves and historic sites normally open to the public; and any other location where the site is visible to a large number of visitors, travelers, or residents. 3. An assessment of the visual impact of the tower base, guy wires and accessory buildings from abutting and adjacent properties and streets. k. Additional information required by the Administrator for determination that all applicable zoning regulations are met. l. The applicant and the owner of record of any proposed wireless telecommunications facility shall, at its cost and expense, be required to execute and file with the Town a bond or other form of security acceptable to the Town as to type of security and the form and manner of execution, in an amount of at least seventy-five thousand dollars ($75,000.00) for a wireless telecommunications facility and twenty-five thousand dollars ($25,000.00) for a co-location on an existing wireless telecommunications facility or other structure and with such sureties as are deemed sufficient by the Town to assure the faithful performance of this Section. 4.7.6. Conditions Where a project may be conditionally approved, the applicant must show that all conditions below are met: 73 a. The proposed communications tower, antenna or accessory structure will be placed in a reasonably available location which will minimize the visual impact on the surrounding area and allow the facility to function in accordance with minimum standards imposed by applicable communications regulations and applicant’s technical design requirements. b. The location and height of the proposed tower will not substantially impact the character of property listed in or eligible for the National Register of Historic Places, other significant environmental, cultural, or historical site, officially designated scenic roads or rivers, and that the tower is designed to blend into the environment and minimize visual impact. c. The applicant has made every effort to build the proposed tower in such a manner as may allow other telecommunication users to collocate including designing the tower for at least two (2) additional colocations. d. The proposed tower is located such that adequate setbacks are provided on all sides to prevent the tower's fall zone from encroaching onto adjoining properties. e. Applicant must show that all applicable health, nuisance, noise, fire, building and safety code requirements are met. f. The tower must be located no closer to a structure on a separate lot than a distance equal to 1 foot for each foot in height of the proposed tower plus 50 feet as measured from the center of the proposed tower. g. The proposed tower is illuminated as required by the Federal Communications Commission or Federal Aviation Administration. h. Towers shall contain a sign no larger than four square feet to provide adequate notification to persons in the immediate area of the presence of an antenna that has transmission capabilities. The sign shall contain the names of the owners and operators of the antennas, as well as emergency phone numbers. The sign shall be located to be visible from the access point of the site. No other signage, including advertising, shall be permitted on any facilities, antennas, antenna supporting structures or antenna towers, unless required by law. i. Proposed towers may not be located within 1,000 feet of an existing tower unless the applicant certifies and submits satisfactory written evidence such as correspondence, agreements, contracts, etc., that the existing tower does not meet the applicant's structural specifications and the applicant's technical design requirements, or that a collocation agreement could not be obtained at a reasonable market rate. In the event of the situation set forth in this subsection, the clustering of new towers on the same parcel near existing towers is permitted. j. The applicant has pursued any available publicly owned sites and privately-owned sites occupied by a compatible use, and if not utilized, that these sites are unsuitable for operation of the facility under applicable communications regulations and the applicant's technical design requirements. k. Applicant must show by certificate from a registered engineer that the proposed facility will contain only equipment meeting FCC rules and must file with the Administrator a written indemnification of the municipality and proof of liability insurance or financial ability to respond to claims up to $1,000,000.00 in the 74 aggregate which may arise from operation of the facility during its life, at no cost to the municipality, in form approved by the municipality attorney. l. Land development regulations, visibility, fencing, screening, landscaping, parking, access, lot size, exterior illumination, sign, storage, and all other general zoning district regulations except setback and height, shall apply to the use. Setback and height conditions in this section apply. 4.7.7. Special Exception A tower, pole, or antenna may be permitted by special exception granted by the Board of Zoning Appeals after public hearing and find that the special exception meets all the criteria for special exception approval per Section 10.11. 4.8. Temporary Uses 4.8.1. Permits Required Unless otherwise provided, all permitted temporary uses listed below shall require a temporary use permit that shall be reviewed and issued by the administrator, subject to the procedures outlined in Section 10.4, Zoning Permit. If a use is not on the list below, it is prohibited. 4.8.2. Standards for Temporary Uses a. Permanent changes to the site are prohibited, including tree removal. b. All other required permits must be obtained by the operator. c. The applicant must provide a letter of consent from the owner of record of the property on which the temporary uses are to operate. d. The applicant may be required to provide a site plan drawn to scale or showing measurements, which show the property boundaries, the location and dimensions of the proposed temporary use area, existing buildings, existing parking areas and existing driveways and roads. If there will be any temporary structures, such as a tent or stand, they also need to be shown on the site plan. e. Setbacks: Setbacks for structures (tents, stands, etc.), items for sale, or parking areas shall be 25 feet from any adjacent property line or street right-of-way. f. Bond: For all structures associated with a temporary use, a performance bond, surety bond, cash deposit, or letter of credit shall be posted in the amount of 125% of the cost of the structure, trailer, or building, or amount agreed upon by the Administrator and applicant. In the event that the temporary use is not removed within the time specified on the zoning permit, this bond shall be called and the Town shall remove the temporary structure. 4.8.3. Permitted Temporary Use a. Open lot sale of seasonal produce and plant products including Christmas trees, pumpkin patches, or similar agricultural activity for a period not to exceed 45 consecutive calendar days. Applicant’s shall obtain all appropriate Permits as well as all applicable licenses from the Town, County, or State. b. Temporary real estate sales offices (e.g., construction trailer, model home), in conjunction with an approved subdivision or development project, in any district, for a period not to exceed 1 year unless renewed, provided no cooking or sleeping accommodations are maintained in the structure. These may be renewed, upon 75 written request, for periods of 6 months at a time if the subdivision has an active Project Permit. Only one (1) temporary real estate office shall be allowed per 50 residential units within the development. c. For new construction, a contractor’s office and equipment sheds, including steel cargo storage containers, in any district districts, for a period of 1 year, provided a Project Permit has been issued for construction on the site, and such facilities are placed on the property to which it is appurtenant d. Temporary classroom facilities shall not be located at any school, religious institution, or other similar use, unless a plan for improvements designed to eliminate the temporary classrooms at a time certain in the future has been approved by the Administrator or appropriate zoning process. Such process shall include a review of a site plan for the temporary classrooms, and may require screening, buffering, or other standards for compliance. Extensions of up to 1-year may be permitted by the administrator, upon written request, if the units have not proven to be a nuisance and the plan for elimination is still active. e. Portable steel storage containers are permitted in any district for purposes of loading or unloading, for a period not to exceed 30 consecutive calendar days when located on private property, and 14 consecutive calendar days when within a right- of-way. It shall not block access to an existing entryway and points of ingress or egress. Where a container is placed within the right-of-way, prior authorization from the regulating authority shall be obtained. f. Fairgrounds shall obtain all required licenses, inspections, certifications from applicable local, state, and federal agencies. In addition, fairground shall be subject to the following: 1. Site Plan: The applicant shall have a site plan showing the location of all amenities, aid stations, restrooms, infrastructure, parking areas, pedestrian pathways, vehicular circulations patterns, signage, lighting, and other similar features deemed necessary by the Administrator. 2. Liability Insurance: The applicant shall have all applicable and required means of insurance deemed necessary by the Town’s legal representative. 3. Emergency Services: The applicant must provide to the applicable Police and Fire authority that all measures of health and safety are being met or exceeded. 4. Access to Utilities: The applicant must demonstrate adequate access to all utilities. 4.5.3. Coordination: The applicant shall obtain a Special Events Permit from the Town and ensure the coordination of other applicable approvals relating to this event. 5.0 Land Development Standards 76 5.1. Purpose The public health, safety, economy, good order, appearance, convenience, morals, and general welfare require the harmonious, orderly and progressive development of land within the Town of Chapin. In furtherance of this general intent, the regulation of land development by the Town of Chapin is adopted for the following purposes, among others: 5.1.1. To encourage the development of an economically sound and stable community; 5.1.2. To ensure the timely provision of required streets, utilities, other facilities and services to new land developments; 5.1.3. To ensure the adequate provision of safe and convenient traffic access and circulation, both vehicular and pedestrian, in and through new land developments; 5.1.4. To ensure the provision of needed public open spaces and building sites in new land developments through the dedication or reservation of land for recreational, educational, transportation and other public purposes; and 5.1.5. To ensure, in general, the wise and timely development of new areas or redevelopment of areas in harmony with the adopted Town of Chapin Comprehensive Plan. 5.2. Applicability 5.2.1. The following developments shall comply with the improvement requirements in this article: a. The developer, owner, or applicant shall be responsible for the improvements required with all new, significantly improved, or expansion of development that require Minor (Section 10.8) or Major Subdivision Review (Section 10.9). b. New development and significantly improved as required for Major Architectural Review (Section 10.6) c. Minor Architectural Review or Minor Subdivision applications that have nonconforming site features or structures that are significantly improved, altered, or otherwise modified according to Article 11, Nonconformities. 5.2.2. The applicant shall be responsible for the installation and construction of required improvements according to the provisions of this ordinance, except as may otherwise be specifically provided herein or by Town policy or agreement. 5.2.3. Approval of a final plan and/or plat shall be subject to the applicant having installed the improvements designated in this article, or having Improvements Guarantee to the satisfaction of the Town and Lexington County for installation of said improvement(s). 5.3. General Requirements 5.3.1. Street Improvements: Land designated for public or private streets shall be cleared and filled in accordance with the latest edition of the “South Carolina Standard Specifications for Highway Construction”, South Carolina State Highway Department, or as determined appropriate by Lexington County or authority having jurisdiction. 77 5.3.2. Water and Sewer Facilities: Water and sewer facilities shall be provided in accordance with the standard procedures and policies of the Town, the Department of Health and Environmental Control (DHEC) and by the water and sewer provider, if different from above. 5.3.3. Utility Lines: All utility lines within a development site shall be installed underground. In some instances, utility lines may be permitted above ground by the Administrator such as; development in Rural Zoning Districts (RA and RR). When it is found to be necessary and desirable to locate public utility lines in a location other than street right-of-way, easements shall be shown on the plat for such purposes. When the water main is located in the street right-of-way and it will be necessary to cut into the street surface to serve abutting lots, a connection shall be stubbed out to the property line to serve each lot before the street is surfaced. Such easements shall be not less than twenty (20) feet along rear property lines and fifteen (15) feet alongside property line, subject to the approval of the authority having jurisdiction, and, where possible, shall be centered on rear and side lot lines. 5.3.4. Natural Gas: When gas lines are located in a street right-of-way, where possible, such lines shall be located outside the portion of the street to be surfaced to prevent cutting into the paved surface to serve abutting properties. 5.3.5. Improvement of Existing Substandard Conditions: Where the existing right of way is substandard, the developer shall be required to dedicate the appropriate amount of right-of-way (as measured from the centerline of the existing street) as well as install all noted sidewalk zone improvements including expanded sidewalks and street trees, lighting, storm drain improvements and street furniture as a part of the development process. 5.3.6. Flood Hazard Areas: In accordance with the Lexington County Flood Prevention Ordinance, any development that contains land subject to flooding shall be accompanied by evidence that no appreciable expansion of the area subject to flooding would result from the proposed development of the land, and that the proposed development will be adequately protected from inundation without appreciable interference with the flow of any watercourse or into an impounding basin. In no case shall any fill, levee, or other protective works be approved unless sufficient compensating adjustments of waterways, ditches, or impounding basins are made to prevent any appreciable expansion of flood hazard area. 5.3.7. Storm Drainage: An adequate drainage system, including necessary improved open channels, pipes, culverts, storm sewers, intersection drains, drop inlet, bridges, and other necessary appurtenances shall be installed by the developer and shall be according to plans and specifications approved by the Lexington County Stormwater Management Division. 5.3.8. Surveying and Engineering a. Installation of Permanent Reference Points: Permanent reference points shall be placed in accordance with the following requirements: 78 1. General Standards: Boundary surveys shall be performed, in accordance with the state minimum standards published by the State Board of Registration for Professional Engineers and Land Surveyors, unless more stringent requirements are specified. A minimum of two points in any survey must be tied to the state plane coordinate system. The survey may be done on the horizontal ground distance and tied back to the state plane coordinates. 2. Control Monuments: Vertical control monuments shall be placed in or near the centerline of pavement of subdivision streets at a minimum of 1 per 4 acres. Where practical, control monuments shall be placed at points of curvature and points of tangency of curves. The control monument may be poured on the job or be a concrete marker of the type commonly used in the area: at least 3 feet long and tapered with a 12-inch long, 1/4-inch diameter brass or bronze rod embedded in the top. Control monuments shall be placed in a cast iron water main valve type box with a cover flush with the pavement. 3. Property Marker: A steel or wrought iron pipe, rebar, or the equivalent, not less than 0.5 inches in diameter and at least 24 inches in length shall be set at all property corners and points of curves, except those located by monuments. They shall be flush with the ground. 4. Accuracy: Land surveys within the Town limits shall be Class A surveys, set at an accuracy of at least 1:10000. 5.3.9. Improvement Guarantees a. Types Allowed: Prior to approval of a Final Subdivision Plat the applicant shall provide a performance guarantee to ensure the completion of required improvements within a period of time as agreed upon by the Administrator and/or Lexington County Engineer and the applicant. The period of time shall be expressed in the guarantee. Such guarantee may be in the form of a performance bond, a surety bond, a cash deposit, or a letter of credit. A performance guarantee shall be posted in the amount of 125% of the total cost of improvements, or in an amount otherwise approved by the Administrator and/or Lexington County Engineer. 1. Performance / Surety Bonds and Letters of Credit: The performance or surety bond, or letter of credit, shall be in a form acceptable to the Town. It shall include a pledge by the bank, insurance company or other bonding/lending institution that the funds necessary to carry out the terms of the agreement are guaranteed for payment and will be released only upon receipt of written instruction from the Town. 2. Cash Deposits: If surety is in the form of a cash deposit with the Town of Chapin, proportional parts thereof shall be refundable in relation to progress payments less retainage, subject to approval of the Town and subject to a minimum deposit balance of 25% of the project cost. 3. Maintenance Guarantees for Private Streets: If the applicant completes all required improvements and complies with all conditions of the 79 subdivision agreement as determined by Lexington County, the remainder of monies retained by a financial institution may be released to the applicant or his successor in title. Prior to release, the applicant shall provide Lexington County, prior to the issuance of any building permit, a performance bond, a surety bond, or a cash deposit equal to the amount determined by Lexington County that would ensure the repair of any damage to the existing improvements during the course of any construction, but in no case will the amount of the security be less than $1,000 for each individual building lot. Prior to the issuance of any certificate of occupancy, Lexington County shall determine whether any breakage or damage has occurred. If no damage to any off-site improvements has occurred, then Lexington County may release the security to the applicant or his successor in title. If any damage has occurred, all such damages shall be repaired, the County may draw on the security before it is released to cover the costs to repair any damage that occurred. If any security remains after such draw(s), the remainder will be released (do we need a timeframe?) to applicant once damages are satisfactorily resolved. 5.3.10. Street Layout Standards a. General Standards: All streets, which shall hereafter be established in connection with the development of a subdivision, shall comply with the following design standards: 1. The layout of the streets as to arrangement, character, width, grade, and location shall be required to conform to the Town’s Master Plan, Official Maps, Comprehensive Plan, and other adopted plans involving transportation infrastructure. 2. Connectivity between compatible uses and adjoining street systems will be used to reduce curb cuts on major thoroughfares and encourage local traffic to use alternative routes on local streets. Compatible

Text truncated. Open the original for the full document.

Source: Town of Chapin website. First collected Oct 14, 2026.