RecordWell Data

UDO Committee Meeting

Town of Chapin · Lexington County · meeting of Aug 24, 2023 · Agendas

Open the original document More from Town of Chapin

Text

Extracted automatically from the original. Tables and formatting may not survive; the original document is authoritative.

CH APIN UNIFIED ZONING & DEVELOPMENT ORDINANCE STEERING COMMITTEE MEETING Council Chambers, Chapin Town Hall A ugust 24, 2023 3:00 P.M. A GENDA Ca ll to order Freedom of Information Act Compliance Approval of Minutes 1. August 1, 2023 Meeting Minutes 2. August 16, 2023 Meeting Minutes New Business 3. Full Draft Review: Unified Zoning & Development Ordinance Adjourn TOWN OF CHAPIN UNIFIED DEVELOPMENT ORDINANCE COMMITTEE MEETING MINUTES Thursday August 1, 2023 Town Hall 3:00 P.M. Members Present: Planning Commission Members Rae Davis, Caleb Pozsik, Yvonne Hudson (arrived at 3:13) Clay Cannon Staff Present: Planning and Zoning Manager Kevin Singletary, Town Clerk Shannon Bowers, Town Administrator Nicholle Burroughs Staff Absent: Mayor Al Koon Guests: Riccardo Giani - MRB Group (via Zoom, arrived at 3:30 p.m.) Call to Order: Chair Davis called the meeting to order at 3:06 p.m. She then determined there was a quorum and acknowledged the appropriate notifications in compliance with the SC Freedom of Information Act had been met. Approval of Minutes Vice Chair Pozsik moved to approve the June 6, 2023 meeting minutes as presented. Member Cannon seconded the motion. No further discussion. Motion passed unanimously. Chair Rae Davis: Yes Member Clay Cannon: Yes Vice Chair Caleb Pozsik: Yes Vice Chair Pozsik moved to approve the June 15, 2023 meeting minutes as presented. Member Cannon seconded the motion. No further discussion. Motion passed unanimously. Chair Rae Davis: Yes Member Clay Cannon: Yes Vice Chair Caleb Pozsik: Yes Chair Davis moved to approve the July 11, 2023 meeting minutes as presented. Vice Chair Pozsik seconded the motion. No further discussion. Motion passed unanimously. Chair Rae Davis: Yes Member Clay Cannon: Yes Vice Chair Caleb Pozsik: Yes New Business Draft Review – Article 5: Land Development Standards: Mr. Singletary began the discussion by stating they would be going through each section for notes. He stated that most of his notes have been given to Mr. Gianni but those changes have not been incorporated into the draft under review. Unified Development Ordinance Committee August 1, 2023 Most edits to the article were grammatical in nature or format related. The committee discussed removing the table of required improvements but including a statement about compliance with the rules of the authority holding jurisdiction (road/street/sidewalks/etc.), including language referencing planning documents, block sizes in subdivisions, cul-de-sac and dead end street regulations to promote interconnectivity in developments (more specific to the center of town), making sure street design standards reflect Lexington County standards (until such time as a Town transportation plan is adopted), road classification tables matching to Lexington County road classifications, sidewalk sizes for a “downtown” area versus rural, requiring sidewalks on both sides of a street, regulations for street trees to not damage sidewalks, and open space definitions and requirements. Mr. Singletary stated that in the interest of time, a called meeting on August 16 at 3:00 p.m. would be needed to finish discussion on Article 5. He stated his intention for the UDO committee to have its final meeting on August 24 before sending it to the Planning Commission for review. Adjournment: Vice Chair Pozsik moved to adjourn the meeting. Member Cannon seconded the motion. Meeting was adjourned at 5:10 p.m. UDO COMMITTEE APPROVED (Date): Rae Davis, PC Chair ATTEST: Shannon Bowers, Town Clerk TOWN OF CHAPIN UNIFIED DEVELOPMENT ORDINANCE COMMITTEE MEETING MINUTES Thursday August 16, 2023 Town Hall 3:00 P.M. Members Present: Planning Commission Members Rae Davis, Caleb Pozsik, Yvonne Hudson, Clay Cannon Staff Present: Planning and Zoning Manager Kevin Singletary, Town Clerk Shannon Bowers, Town Administrator Nicholle Burroughs Staff Absent: Mayor Al Koon Guests: Riccardo Giani - MRB Group (via Zoom) Call to Order: Chair Davis called the meeting to order at 3:04 p.m. She then determined there was a quorum and acknowledged the appropriate notifications in compliance with the SC Freedom of Information Act had been met. New Business Draft Review – Article 5: Land Development Standards: Mr. Singletary began the discussion by briefly updating what had been discussed at the last meeting, and picked up the discussion on open space requirements. Mr. Gianni also acknowledged that previously discussed edits were incorporated into this draft, and any references to “Lexington County Standards” were also incorporated where applicable. Most edits to the article were grammatical in nature or format related. Discussion centered around location, size, and quantity of amenities in subdivisions, exemptions from open space requirements, and amending language to reflect open space requirements in zoning allowing multi-family options. They discussed including more specific language for land development in village commercial, town center, and commercial to include open space requirements where residential components are included. They also discussed conservation subdivisions (conditions and requirements to encourage that development to preserve undeveloped areas, the process for review, and adding requirements for low impact amenities). Discussion on manufactured home parks centered on making sure requirements were in place to ensure a high-quality product. Mr. Singletary suggested separating residential components from group developments into commercial subdivisions (without residential components) and mixed-use subdivisions (with residential components). Member Hudson moved to recess. Vice Chair Pozsik seconded the motion. Committee recessed at 4:31 p.m. Chair Davis called the meeting back at 4:39 p.m. After the break, planned developments were discussed. The committee discussed minimum lot sizes, including language that specifically calls out examples of uses in the area, and approval process for a phased approach to developing planned developments. Requirements for traffic impact studies included adding language to review recently approved developments within the prior 12 months. Discussion on Article 3 was tabled until the next meeting, scheduled for August 24 at 3:00 p.m. Mr. Singletary noted that a full draft review would take place at this meeting. Unified Development Ordinance Committee August 16, 2023 Adjournment: Vice Chair Pozsik moved to adjourn the meeting. Member Cannon seconded the motion. Meeting was adjourned at 5:10 p.m. UDO COMMITTEE APPROVED (Date): Rae Davis, PC Chair ATTEST: Shannon Bowers, Town Clerk 8/18/23 MRB Draft Version 4 1 Article A: Article Descriptions Article B: How to Use This Code A “how to use this code” section lays out a general process of how readers should use the document by outlining common examples seen at the administrative level of planning. Examples such as expanded an existing use, starting a business, subdividing a property, or submitting a text amendment are summarized in this section to give the reader a basic understand of procedure. Article C: Table of Contents A table of contents is a section that provides a guide to the organization and structure of a document. The table of contents lists the titles, sections, and subsections in the order in which they appear within this Unified Development Ordinance (UDO). Article 1: General Provisions As this Unified Development Ordinance (UDO) pertains to all properties within the municipal boundary, and that the Town has the authority to enforce its own code within the Town limits, this section details the “big picture” of zoning and land use regulations. Additionally, this section describes the intent of the code, to have regulations that result in quality development, and establishment of responsible planning; all while maintaining the vision of the Community and the Town of Chapin Comprehensive Plan. These regulations are not meant or intended to conflict with higher regulatory bodies such as State or Federal laws. Please note, there is a subsection within this document exists which will outline the procedure for previously approved applications under the former code, and explains that uses or structures that do not comply with this code are considered legal nonconforming uses and structures. Article 2: Decision Making Bodies This section describes all decision-making entities and persons within the Town that have powers, duties, and responsibilities to uphold the regulations within this document. For each decision-making body or person, the subsections described the composition, powers, duties, appointment procedure, and term of office for the applicable review body. Additionally, this section shall give the Administrator of the UDO and/or the Town Planning and Zoning Manager, full power and autonomy within the limits of this document and legal authority, to enforce, interpret, and process applications relevant to the physical development and use of land within the Town. Article 3: Zoning Map and Districts The core of Planning for any jurisdiction is the division of Land Uses by the implementation of zoning regulations. Land use categories are segregated according to their operational and physical characteristics. Each Zoning District that the Town has defined and/or identified is described within this section. The district definitions are supplemented by descriptions of the intent of each Zoning District to ensure that development within the respective district conforms to the unique character of each Zoning District, regardless of residential, commercial, institutional, or industrial in nature. This section will also briefly describe the general lot and building standards applicable to this section. It will indicate how lot(s) shall be accesses by 8/18/23 MRB Draft Version 4 2 vehicles and Utilities, illustrate or dictate road frontage dimensional standards, discuss geometrical shapes and layout of property or lot(s), and describe the minimal property or lot size that may be developed. Article 4: Land Use Provisions The previous section establishes the various Zoning Districts within the Town. This section will detail the Land Use Provisions specific to each Zoning District and provide a Table of Permitted Uses within in the section that will list all defined land uses permitted within the Town and provide details for its use. The nomenclature and categories are as follows: • Permitted (P), within the applicable Zoning District • Conditional (C), with additional standards or requirements based on end use • Special Exception (SE), granted by the Board of Zoning Appeals • Permitted in Existing Buildings Only (E) if the cell is blank (-), indicating that use is not permitted within the zoning district. After utilizing and navigating the Permitted Use Table and finding that the desired use is allowed only with Conditional (C) or by Special Exception (SE), the next sections list out all of those uses and detail specific standards requiring compliance prior to approval. These standards may or may not, but are not limited to, the appearance, operation, or location of use.. In addition to the Permitted Use Table, the UDO recognizes uses and structures that are an accessory to the principal use. An example of an accessory use is a residential garage, backyard chicken coop, home-based business, or a drive-thru window at a bank or restaurant. The Accessory Use Table details what zoning district these accessory uses and structures are permitted, and applicable regulations for each type of accessory use and structure. Article 5: Land Development Standards This section specifies the improvements required for a development site, including but not limited to, underground utilities, connection(s) to public utilities, street design requirements, streetscape requirements, provisions for driveways, open space allotment(s), and regulations for subdivision conservation. The/ These infrastructure and site requirements are typically prompted when a development is proposed, such as a new residential subdivision, multi-family complex, commercial building, or commercial shopping center. Article 6: Architectural Review/Design Standards The Town of Chapin has three (3) architectural Overlay Districts; the Town Center, Boulevard, and Gateway. An Overlay District is an additional District which is applied over one or more previously established Zoning Districts, establishing additional or stricter standard(s) and/ or criteria for applicable properties, in addition to those of the underlying zoning district. The regulations crafted for each Overlay District(s) are unique to each district and dictate how each is to retain and perpetuate the unique characteristics of that Overlay District. For example, the purpose of the Town Center Overlay District is to have buildings that have a walkable relationship to the street, facilitate a mixture of uses, and encourage the development of environments that individuals can “live, work, and play.” 8/18/23 MRB Draft Version 4 3 Article 7: Landscaping, Buffers, and Tree Preservation A tree preservation, buffer, and landscaping section is a set of regulations, guidelines, and policies that aim to protect trees, vegetation, and natural areas within a community. This section aims to ensure that the development, construction, and landscaping activities in the area are in harmony with the natural environment and the community's aesthetic values. This includes protecting trees from damage during construction projects, requiring permits for tree removal, and implementing measures to protect trees during maintenance activities. The buffer aspect of this section requires creating a buffer zone between natural areas and development areas. This buffer zone serves as a transition area between the two areas and helps to minimize the impact of development on the natural environment. Landscaping requirements may require property owners to design and maintain their landscape in a way that complements the natural environment. This includes planting native plants, trees, and vegetation that are suitable for the local climate and soil conditions. Article 8: Parking and Lighting Standards The purpose of parking and lighting regulations is to ensure safe and efficient use of parking spaces and lighting within a community. This section outlines rules for parking lot design, interior landscaping, number of parking spaces required, as well as requirements for lighting levels, placement, and maintenance. The goal of these parking and lighting regulations is to promote public safety, reduce traffic congestion, and enhance the overall aesthetic of the community. Article 9: Signs The primary form of physical advertisement for businesses, institutions, and other uses is by on- premise signage. On-premise signage is contained within the property of the use, and is either attached to the primary building or a free-standing sign supported by a small structure. This section regulates the number, size, location, and content of signs. These sign standards have been carefully crafted to allow uses to have visibility to vehicular and pedestrian traffic, but also to prevent the proliferation of signs that could pose a traffic hazard, not to mention the negative aesthetic effects of sign pollution. Article 10: Development Review Procedures This section compiles all development review procedures referenced within this code. Various approvals require decisions by Town Staff and/or other Decision-Making Entity/ Body/ Person(s) that may require additional review(s). Other sections may reference to this section to inform the reader as to what kind of approval is required. Each development review procedure details the application requirements, review procedure, and appeal procedure, if necessary. This article details the vested rights and regulations adopted by the Town. 8/18/23 MRB Draft Version 4 4 Article 11: Nonconformities This code recognizes that there are existing legal nonconformities and that there will be additional legal nonconformities created with this code. A nonconformity is a feature regarding a property (land use, structure, setback, parking, landscaping, building material, sign, etc.) that currently does not comply with the requirements of this code. The adoption of this code does not insinuate or infer that the Town will retroactively attempt to correct every nonconforming feature and/or property(ies) within the Town. This section is intended to regulate when nonconforming properties are improved, expanded, and/or cease operations conducted prior to the adoption of this code. Article 12: Violations and Enforcement A zoning violation is characterized as a property that does not meet the minimum regulation as governed within this UDO. The most common zoning violations can be characterized as inoperable vehicles, off-premise signs, and operating a use that is not permitted in a specific Zoning District. If cited, and violations are not corrected and/or attempts to correct, are not completed in a timely manner, they may result in a fine or misdemeanor charge. Appendices The Appendix section of this document is for supplementary documentation to this Ordinance. You will find the list of defined terms used in this ordinance, the Town of Chapin’s Approved Tree Species List, the approved color palette, and applicable fee schedule. The relevant section will indicate the use of these appendices, such as when tree species are proposed during a development project, and/or a building is under review by the Town. MRB Group – Version 4 – 8.19.23 1 ARTICLE B: HOW TO USE THIS CODE The Town of Chapin Unified Development Ordinance (UDO) is a compilation and library of rules and regulations that govern how Real Property and/or Land can be used in a particular area. Using this UDO requires careful review of the regulations and requirements for any improvement. It is important to follow the process and obtain any necessary approvals to ensure compliance with local zoning laws. Below are steps that should be followed prior to consideration of a development application: 1. Identify the appropriate Zoning District: The first step in using a UDO is to determine the Zoning District of the property you are interested in. The Zoning District is typically illustrated on a zoning map, which is available from your local government or planning department. 2. Examine the Permitted Uses: Once you have determined the appropriate Zoning District and examined the Permitted Uses for that District, the UDO will attempt to provide a complete list of allowable uses for that Zoning District such as residential, commercial, or industrial. Make sure the intended use of the property is allowed in that zoning district. 3. Acknowledge and comply with special requirements: Various Zoning Districts may dictate special requirements, such as minimum lot size, setbacks from property lines, or maximum building height(s). Make sure to review these requirements to ensure compliance. 4. Identify and Review Zoning Variances or Special Permits: If the intended use of a property is not allowed and/or permitted in a specific Zoning District, it may be possible to obtain a variance or special permit. These are typically characterized as exceptions to the UDO and allow certain uses under certain conditions. Applicants will be required to review all requirements for obtaining a Variance or Special Permit prior to application submission. 5. Application Submission: Applicants will submit an application to their local government or planning department and will briefly describe the intended use of what is being applied for, plans or improvements to be made on the property, and remit payment for associated fees. If a Variance or Special Permit is required, additional application documents may be required. 6. Public Hearing Attendance: Contingent upon what has been applied for and/or due to a request for Zoning Variance or Special Exception, Applicants may be required to attend Public Hearings established by the appropriate Decision-Making Entity or Commission. Public hearing attendance will serve as an opportunity for Applicants to present their application request and will facilitate an opportunity to provide responses to questions derived from the applicable decision-making body. 7. Obtain approval: Once an application has been reviewed, and any or all necessary or required hearings have been held, a decision will be rendered. If approved, an applicant will then be authorized to use or improve the property for the applied purpose. If denied, applicants are MRB Group – Version 4 – 8.19.23 2 advised and encouraged to consider minor and/ or substantive revisions to their application, planned use, and/or planned improvement(s) or to simply seek alternative options. SPECIFIC APPLICATION INFORMATION A. IF YOU WANT TO SUBDIVIDE YOUR PROPERTY 1. Find your zoning district and any overlay districts by looking at the Official Zoning Map 2. Determine the development standards — minimum lot sizes, setbacks, etc. — as described in Article 3. 3. Determine approved uses, and any conditions and special exceptio ns that may apply — Article 4. 4. Determine the subdivision and infrastructure standards for the proposed development of the property in Article 5. 5. Determine the process for moving forward, as described in development review procedures – Article 10. B. IF YOU ARE OPENING A BUSINESS 1. Find your zoning district and any overlay districts by looking at the Official Zoning Map 2. Determine approved uses, and any conditions and special exceptions that may apply — Article 4 3. Contact the Planning Department for a zoning permit 4. Contact Lexington County for building inspections 5. Apply for a Sign Permit and Business License at the Town of Chapin C. IF YOU WANT TO CHANGE YOUR ZONING DISTRICT A rezoning application must be submitted to the Zoning Administrator. The applica tion must go to the Planning Commission for a recommendation prior being determined by Town Council. See Article development review procedures for application requirements and criteria for rezoning requests. D. IF YOU WANT TO CHANGE THE TEXT IN THIS DOCUMENT Any citizen of the Town can initiate a code change to this document. Other entities, such as the Planning Commission and Town Council also share the power to initiate a code change, or formally known as a text amendment. A text amendment is initiated b y submitting an application to the Administrator (Planning and Zoning Manager) MRB Group – Version 4 – 8.19.23 3 Code Formatting 1. Level 1 – Chapter 1.1. Level 2 1.1.1. Level 3 a. Level 4 (1.1.1.a) 1. Level 5 (1.1.1.a.1) a. Level 6 (1.1.1.a.1.a) i. Level 7 (1.1.1.a.1.a.i) MRB Draft 8/17/23_Version 4 1 Article C - Table of Contents A. Article Descriptions B. How to Use this Code C. Table of Contents 1.0 General Provisions 1.1 Title 1.2 Authority 1.3 Jurisdiction 1.4 Purpose and Intent 1.5 Consistency With All Adopted Plans 1.6 Conformity With All Standards 1.7 Transitional Provisions 1.8 Severability 1.9 Effective Date 2.0 Decision Making Bodies 2.1 Town Council 2.2 Planning Commission 2.3 Board of Zoning Appeals 2.4 Architectural Review Board 2.5 Building Official 2.6 Planning and Zoning Manager 2.7 Coordination with Other Governing Bodies 3.0 Zoning Map and Districts 3.1 Purpose and Intent 3.2 Official Zoning map 3.3 Interpretation of District Boundaries 3.4 Lot Divided By District Boundaries 3.5 Changes 3.6 Establishment of Zoning Districts 3.7 District Development Standards 3.8 General Lot and Building Standards 4.0 Land Use Provisions 4.1 Purpose and Intent 4.2 Applicability 4.3 Table of Permitted Uses 4.4 Conditional Use and Special Exception Standards 4.5 Accessory Uses and Structures 4.6 Sexually Oriented Businesses 4.7 Telecommunications 4.8 Temporary Uses 5.0 Land Development Standards 5.1 Purpose 5.2 Applicability 5.3 General Requirements 5.4 Open Space 5.5 Alternative Development Patterns 5.6 Traffic Impact Study 6.0 Architectural Review/Design Standards 6.1 Purpose and Intent 6.2 Boundaries 6.3 Conflicts with Other Regulations 6.4 Applicability of Design Standards 6.5 Architectural District Standards 7.0 Landscaping, Buffers, and Tree Preservation 7.1 Purpose and Intent 7.2 Administration 7.3 Landscaping Standards 7.4 Parking Landscaping 7.5 Perimeter Buffering 7.6 Tree Protection and Preservation MRB Draft 8/17/23_Version 4 2 8.0 Parking and Lighting Standards 8.1 Purpose and Intent 8.2 Applicability 8.3 General Standards 8.4 Minimum Off-Street Parking Requirements 8.5 Design Standards for Parking Lots 8.6 Pedestrian Access 8.7 Lighting 9.0 Signs 9.1 Purpose and Intent 9.2 Applicability 9.3 General Provisions 9.4 Freestanding Signs 9.5 Attached Signs 9.6 Other Signs that Require a Zoning Permit 9.7 Temporary Signs 9.8 Violations 10.0 Development Review Procedures 10.1 Purpose and General Standards 10.2 Application Procedures 10.3 Application Requirements 10.4 Zoning Permit 10.5 Architectural Review, Minor 10.6 Architectural Review, Major 10.7 Subdivision Review 10.8 Minor Subdivision Review 10.9 Major Subdivision Review 10.10 Administrative Adjustment 10.11 Special Exception 10.12 Variance 10.13 Administrative Appeals 10.14 Amendments and Rezonings 10.15 Vested Rights and Expiration of Approvals 11.0 Nonconformities 11.1 General 11.2 Nonconforming Uses 11.3 Nonconforming Lots of Record 11.4 Nonconforming Structures 11.5 Nonconforming Signs 11.6 Nonconforming Site Features 12.0 Violations and Enforcement 12.1 Violations Generally 12.2 Enforcement Appendices I. Definitions II. Town of Chapin Tree List III. Approved Color Palette IV. Unified Development Review Permit and Fee Schedule MRB Draft 8/23/23 _Version 4 1 1.0 General Provisions 1.1 Title 1.1.1 This document is to be known as the “Town of Chapin Unified Zoning & Development Ordinance (UDO).” It should be read in conjunction with the official zoning map noted in Section 3.2. 1.2 Authority 1.2.1 The development regulations contained in the UDO have been adopted pursuant to the authority conferred by the South Carolina Local Government Comprehensive Planning Enabling Act of 1994, S.C. Code 1976, § 6-29-310 et seq. 1.2.2 The enumeration of these sections of the General Statutes is not intended to exclude any other section of the General Statutes which grants or confirms authority to municipalities to promulgate ordinances, rules, or regulations similar or identical to those set forth in the Unified Development Ordinance. 1.3 Jurisdiction 1.3.1 Pursuant to the general health, safety and welfare of the community, the articles and sections of the UDO apply as relevant to all development within the corporate limits of Chapin in their current form and in all future extensions and configurations as shown on the official zoning map and its periodic updates 1.3.2 Conflicting Provisions a. Whenever the requirements made under authority of these regulations impose stricter standards than are required in any other statute or local ordinance or regulation, the provisions of this Code shall govern. Whenever the provisions of any other statute or local ordinance or regulation impose stricter standards than are required by this Code, the provisions of such statute or local ordinance or regulations shall apply. b. Conflict with Covenants 1. The Town does not enforce private covenants; however, the Town may require approval from formalized neighborhood associations before projects are approved. When there is a dispute as to the interpretation of covenants, the Town reserves the right to issue permits that are otherwise in compliance with this Code. Whenever the requirements of formally adopted covenants impose stricter standards than the provisions of this Code, the covenants shall govern. This code does not alleviate an applicant’s responsibility to conform with restrictive covenants. The Town may delay an application when it is understood that a covenant exist for the property in question. However, in case of a conflict in which this Code is stricter than the covenants, this Code shall govern. MRB Draft 8/23/23 _Version 4 2 2. Per Section 6-29-1145. (B) of South Carolina law, the Town shall not issue a permit if the request or activity is expressly prohibited in recorded covenants 1.4 Purpose and Intent 1.4.1 In accordance with SCCL Section 6-29-710, this Code is adopted for the general purposes of guiding development in accordance with existing and future needs and promoting the public health, safety, convenience, order, appearance, prosperity, and general welfare. To these ends, this Code is adopted with reasonable consideration of the following purposes, where applicable: a. To provide for adequate light, air, and open space b. To facilitate the creation of a convenient, attractive, and harmonious community c. To protect and preserve scenic, historic, or ecologically sensitive areas d. To facilitate the adequate provision or availability of transportation, police and fire protection, water, sewage, schools, parks, and other recreational facilities, affordable housing, disaster evacuation, and other public services and requirements e. To secure safety from fire, flood, and other dangers f. To further the public welfare in any other regard specified by a local governing body Specifically, the regulations contained in the UDO and other relevant adopted plans and policies are designed to implement the following planning principles: • Embrace the Greater Chapin Community while preserving cultural heritage and small-town feel • Work with regional partners to facilitate well-planned growth • Protect scenic and critical natural resources including areas surrounding Lake Murray • Enhance transportation infrastructure by promoting connectivity • Preserve and create open spaces for public gathering and enjoyment • Develop and enhance the Town Center as a central gathering place • Expand the availability of quality housing options • Promote the local economy • Enhance quality of life through quality design 1.5 Consistency With Comprehensive Plan 1.5.1 IMPLEMENTATION OF ADOPTED PLANS AND POLICIES In accordance with S.C. Code 1976, § 6-29-310 et seq., the UDO is intended to implement the various development-related plans and policies adopted by the Town Council. As such, all development plans submitted shall be in MRB Draft 8/23/23 _Version 4 3 conformance with the Comprehensive Plan and other plans and policies adopted by the Town. 1.6 Conformity With All Standards 1.6.1 No land, structure or parts thereof shall be used, occupied, constructed, erected, altered or moved, unless in conformity with all of the regulations herein specified for the zoning district in which it is located, and with all other applicable local, state and federal laws. 1.7 Transitional Provisions 1.7.1 Existing Buildings a. Existing buildings and appurtenances that do not conform to the provisions of the UDO at the time of its adoption may continue in use as they are until a substantial improvement is requested, at which time the Administrator shall determine the provisions of the UDO that shall apply to achieve the highest degree of conformity subject to practical limitations. Such changes shall be subject to the provisions of Article 11, Nonconformities. b. The modification of existing buildings is permitted subject to approval by the Administrator if such changes result in greater conformance with the specifications of the UDO 1.7.2 Development Subject to a Planned Development (PD) or Development Agreement a. Any application that has received approval for a PD district and/or development agreement before the effective date of the UDO or any amendment thereto may be carried out in accordance with the master plan for the PD and its terms and conditions of approval, and the terms and conditions of the development agreement, provided the PD and development agreement does not expire and otherwise remains valid. If the PD approval or development agreement expires, is revoked (e.g., for failure to comply with time limits or the terms and conditions of approval), or otherwise becomes invalid, any subsequent development of the site shall be subject to the procedures and standards of the UDO. 1.7.3 Other Approved Development Permits and Approvals a. Any other development that has received approval of a development permit or similar approval before the effective date of this chapter or any amendment thereto may be carried out in accordance with the terms and conditions of the development permit or approval and the procedures and standards in effect at the time of approval, provided the permit or approval does not expire and otherwise remains valid. If the development permit or approval expires, is revoked (e.g., for failure to comply with time limits or the terms and conditions), or otherwise becomes invalid, any subsequent development of the site shall be subject to the procedures and standards of the UDO. MRB Draft 8/23/23 _Version 4 4 b. Pending Applications Any development application submitted and accepted as complete before the effective date of this Ordinance, but still pending final action as of that date, shall be reviewed and decided, in accordance with the regulations in effect when the application was accepted, provided that the permit or approval does not expire, is revoked, or otherwise becomes invalid. 1.7.4 Photographs and Drawings Photographs and drawings in this ordinance are for illustrative purposes only and shall not be considered as part of the text of this ordinance. 1.8 Severability In the event of any portion of the UDO being declared unconstitutional or invalid, such decision does not affect the remainder of the ordinance. 1.9 Effective Date The date of adoption of this Unified Development Ordinance is recorded as of [DATE OF ADOPTION]. 6.9.23 – Article 2, Version 4 – RG 2.0 Development Review Bodies / Administration 2.1 Town Council 2.1.1 Powers and Duties a. Comprehensive Plan Amendments: To initiate, modify, and adopt a Comprehensive Plan after receiving recommendations from the Planning Commission. b. Text Amendments: The Town Council shall entertain and approve, approve with conditions, or deny proposed text amendments to this Ordinance. c. Map Amendments: The Town Council shall entertain and approve, approve with conditions, or deny proposed amendments to the Official Zoning Map. d. Appointments: The Town Council shall appoint members to the Planning Commission (PC), Board of Zoning Appeals (BZA), and Architectural Review Board (ARB). e. Development Improvements: Upon approval of a final plat, when applicable, the Town Council shall determine the acceptance or non- acceptance of all dedicated streets, easements, rights-of-way, public parks, and other public lands as shown on the plat. f. Annexations: The Town Council shall review and act on all annexations and have final authority on the zoning designation of the annexed parcel(s). 2.2 Planning Commission 2.2.1 Powers and Duties a. Authority: Pursuant to S.C. Code 1976, § 6-29, et seq., as amended, there is hereby established a Planning Commission, referred to herein as the PC, for the Town, which shall perform all planning functions in the areas of jurisdictional control for the Town of Chapin. b. Territorial Jurisdiction: The PC may exercise the power set forth in Title 6, Chapter 29 of the South Carolina Code of Laws, as amended, within the municipal boundary in the Town of Chapin. c. Specific Planning Activities: The PC has a duty to engage in a continuing planning program for the physical, social and economic growth, development and redevelopment of the Town of Chapin. The Chapin Town Council designates to the Planning Commission the following duties: 1. Prepare and recommend revisions to the Comprehensive Plan to Town Council for adoption. 2. Review and provide recommendations regarding public projects. 3. Review and approve, approve with conditions, or deny all applicable subdivision applications. 4. Site Plan (Preliminary Plat) and Final Subdivision Plat review and approval in coordination with the Administrator. 5. Review and provide recommendations to the Town Council regarding amendments to the text of this Ordinance. 6. Review and provide recommendations to the Town Council regarding amendments to the Official Zoning Map 6.9.23 – Article 2, Version 4 – RG 7. Review and provide recommendations to the Town Council regarding Annexations. 2.2.2 Membership, Terms, and Compensation a. Number: All commission members shall be appointed by the Mayor and Town Council. The Planning Commission shall consist of five (5) members. b. Appointment: Planning Commissioners shall reside within the Town of Chapin, Lexington County, or surrounding area. Members shall serve until their successors are deemed qualified and appointed, and shall meet all the requirements for appointment as outlined within the Town of Chapin’s ordinances and per applicable State Law. No member of the Planning Commission shall be the holder of an Elected Public Office of the Town. All appointed members of the Planning Commission shall have demonstrated independent judgment and shall be able to prepare for and attend board meetings. c. Terms: All terms shall be for three (3) years and shall be staggered with no more than two commissioners with the same term period, unless otherwise noted. All terms shall expire on December 31st of the applicable calendar year. d. Vacancies: A vacancy, for any reason, shall be filled for the unexpired term. e. Removal: The Town Council may remove any town-appointed member of the PC for cause by majority vote of the Council. f. Compensation: Any and/or All members shall serve without pay. Members may be reimbursed for actual expenses incurred in the performance of their duties from available funds approved in advance by the Administrator. 2.2.3 Officers, Meetings, and Quorum a. Officers: Pursuant to State Statue § 6-29of the South Carolina Code of Laws, 1976, as amended, shall organize a local Planning Commission. The Planning Commission shall elect a chairperson and a vice-chairperson from its members who shall serve a one (1) calendar year appointment or until re-elected; or until a successor is elected. b. Meetings: Meetings of the Planning Commission shall be convened each month within a calendar year, at the request of the Chairperson, and/or at such other times as the majority of the Planning Commission Members or Town Officials may determine. All meetings of the Planning Commission shall be open to the public. c. Quorum: A majority of the members appointed shall constitute a quorum. d. Rules of Proceeding: 1. The Planning Commission shall adopt rules of organizational procedure (Robert's Rules of Order). a. The PC shall adopt and retain bylaws and rules of procedure. 6.9.23 – Article 2, Version 4 – RG 2. Commissioners that may have a conflict of interest, either perceived or proven through the SC Ethics Commission, shall abstain from voting on the matter that is causing the conflict. 3. In the case of an abstention where there is no conflict of interest, an abstention from voting shall be considered a vote to approve the motion. e. Minutes: The Planning Commission shall keep a publicly accessible record of its resolutions, findings, determinations, and minutes of its proceedings, illustrating the vote of each member upon each question, or indicating absence or failure to vote. f. Staff: The Planning Commission shall work with Town Officials for all applicable projects within the Town. 2.3 Board of Zoning Appeals 2.3.1 Powers and Duties a. Authority: The Board of Zoning Appeals (BZA) is hereby established, pursuant to the authority of § 6-29, et seq., of the South Carolina Code of Laws, as amended, and shall hereafter be referred to as the BZA. b. Territorial Jurisdiction: The BZA may exercise the power set forth in Title 6, Chapter 29 of the South Carolina Code of Laws, as amended, within the municipal boundary in the Town of Chapin. The Town Council may expand the jurisdiction of the BZA by ordinance and/or intergovernmental agreement, in accordance with the provisions of § 6-29of the South Carolina Code of Laws. c. Appeals: The BZA shall entertain and determine appropriate appeals action where it is alleged there is an error in an order, requirement, decision, or determination made by an Administrative Official in the enforcement of this Code. d. Variances: The BZA shall hear and decide requests for Variance from the requirements of this Code when strict application of the provisions of the Ordinance would result in unnecessary hardship. e. Special Exception: The BZA shall permit uses by Special Exception subject to the terms and conditions set forth for such uses in this Ordinance. 2.3.2 Membership, Terms, and Compensation a. Appointment: All BZA members shall be appointed by the Mayor and Town Council. The BZA shall consist of five (5) members The BZA Commissioners shall reside within the Town of Chapin, Lexington County, or surrounding area. Members shall serve until their successors are deemed qualified and appointed, and shall meet all the requirements for appointment as outlined within the Town of Chapin’s ordinances and per applicable State Law. No member of the BZA shall be the holder of an Elected Public Office of the Town. All appointed members of the BZA shall have demonstrated 6.9.23 – Article 2, Version 4 – RG independent judgment and shall be able to prepare for and attend board meetings. b. Terms: All terms shall be for three (3) years and shall be staggered with no more than two commissioners with the same term period. All terms shall end on December 31st of the applicable calendar year, and members must continue to serve until their successors are appointed. c. Vacancies: Any vacancy in the membership shall be filled for the unexpired term in the same manner as the initial appointment. d. Removal: The Town Council may remove any member of the BZA for cause. e. Compensation: Members shall serve without pay. Members may be reimbursed for actual expenses incurred in the performance of their duties from available funds approved in advance by the Administrator. 2.3.3 Officers, Meetings, and Quorum a. Officers: The BZA shall elect a chairperson and a vice-chairperson from its members who shall serve a one (1) calendar year appointment or until re- elected; or until a successor is elected. b. Meetings: Meetings of the BZA shall be held at the request of the chairperson, by a majority of the BZA, and at such other times as the BZA may determine. All meetings of the BZA shall be open to the public. c. Quorum: A majority of the members appointed shall constitute a quorum. d. Witnesses: The chairperson, or in his or her absence, the vice-chairperson, may administer oaths and compel the attendance of witnesses by subpoena. e. Rules of Proceeding 1. The BZA shall adopt rules of organizational procedure (Robert's Rules of Order).. a. The BZA shall retain and adopt bylaws. 2. Commissioners that may have a conflict of interest, either perceived or proven through the SC Ethics Commission, shall abstain from voting on the matter that is causing the conflict. 3. In the case of an abstention where there is no conflict of interest, an abstention from voting shall be considered a vote to approve the motion. f. Decisions: The concurring vote of three (3) members of the BZA shall be necessary to: reverse any order, requirement, decision, or determination of the Administrator or Building Official, or to determine in favor of an applicant on any matter upon which it is required to pass judgement, or to affect any variation of this Code. On all appeals, applications and matters brought before the BZA, the BZA shall inform in writing all Parties involved of its decisions and the resolutions, findings, or determinations thereof. g. Contempt Penalty: In case of contempt by a Party, Witness, or other person before the BZA, it may certify the action to the Circuit Court, and the Judge 6.9.23 – Article 2, Version 4 – RG of the Court, in open Court or in chambers; after hearing, may impose a penalty as authorized by Law. h. Minutes: The BZA shall keep a record of its findings, determinations, and minutes of its proceedings, illustrating the vote of each member upon each question, or indicating absence or failure to vote. The Board shall keep records of its examinations and other Official Actions, all of which shall be immediately filed in the Office of the Zoning Administrator and shall be a public record i. Staff: The BZA shall work with the Zoning Administrator for all projects within the Town. 2.4 Architectural Review Board 2.4.1 Powers and Duties a. Territorial Jurisdiction: The Architectural Review Board, referred to herein as the ARB, shall perform all functions defined herein within the area of jurisdictional control within the Town of Chapin. b. Powers and Duties: Review, approve, or deny, all applications subject to Major Architectural Review as outlined in Section 10.6. 2.4.2 Membership, Terms, and Compensation a. Appointment: Members of the ARB shall be appointed by the Town Council The ARB shall consist of five (5) members appointed by Town Council. Four (4) of the five (5) Board members must have professional backgrounds related to this field, with one representative of each of the following professions sitting on the Board: registered architect, real estate professional, engineer or member of the building trades, and a Chapin business owner. The fifth seat is open to members of the general public. b. Terms: All terms shall be for three (3) years and shall be staggered with no more than two commissioners with the same term period. All terms shall expire on December 31st of the applicable calendar year and members must continue to serve until their successors are appointed. c. Officers: The ARB shall elect a chairperson and a vice-chairperson from its members who shall serve a one (1) calendar year appointment or until re- elected; or until a successor is elected d. Rules of Proceeding: 1. The ARB shall adopt rules of organizational procedure (Robert's Rules of Order). a. The ARB shall adopt and retain bylaws and rules of procedure. 2. Board members that may have a conflict of interest, either perceived or proven through the SC Ethics Commission, shall abstain from voting on the matter that is causing the conflict. 3. In the case of an abstention where there is no conflict of interest, an abstention from voting shall be considered a vote to approve the motion 6.9.23 – Article 2, Version 4 – RG e. Vacancies: Any vacancy in the membership shall be filled for the unexpired term in the same manner as the initial appointment. f. Removal: The Town Council may remove any member of the ARB for cause. 2.4.3 Compensation: Members shall serve without pay. Members may be reimbursed for actual expenses incurred in the performance of their duties from available funds approved in advance by the Administrator. 2.5 Building Official 2.5.1 Designation Lexington County shall designate and empower the Building Official. 2.5.2 Powers and Duties a. Responsibility: The Building Official shall be responsible for all duties specified in Section 14-241 of the Lexington Code of Ordinances. b. Powers and Duties: The Building Official shall follow the powers and duties within Section 14-241 and other applicable code sections. 2.5.3 Appeals Appeals for decisions made by the Building Official shall be reviewed by the Lexington County Community Development Building Codes Board of Appeals, in accordance with Section 14-412 of the Code of Ordinances for Lexington County. 2.6 Planning and Zoning Manager 2.6.1 Designation The Planning and Zoning Manager will be referred to as the “Zoning Administrator” within this Ordinance. The Zoning Administrator shall be defined as any person or persons designated by the Town to fulfill the duties herein. 2.6.2 Powers and Duties The Zoning Administrator shall: a. Administer and enforce the provisions of this Ordinance b. Make written interpretations of this Ordinance c. Review and make recommendations on Project Permits where the Building Official has authority d. Review and process Zoning Permits e. Review and process Certificates of Zoning Compliance f. Review and make recommendations on Certificates of Occupancy g. Process applications for Variances and Special Exceptions h. Issue all permits, exception for Project Permits where the Building Official has authority i. Review and act on Administrative Adjustments j. Review and act on Minor Development Design Review applications 6.9.23 – Article 2, Version 4 – RG k. Review and make recommendations to the Architectural Review Board on Major Development Design Review applications l. Review and make recommendations on preliminary plats, site plans, and final plats 2.7 Coordination with Other Governing Bodies 2.7.1 General: Approvals granted by the Town of Chapin are contingent upon the approval, authorization, permit, or acceptance required of the proposal by any other organization or agency. A copy of the required approval, authorization, permit, or acceptance must be submitted to the Administrator, prior to approval of the construction plans, issuance of a final plat approval, or issuance of a Building Permit. 8/15/23 MRB Group Version_4 Article 3 Zoning Districts and Boundaries 3.0 Zoning Districts and Boundaries 3.1 Purpose and Intent For the purposes of this Ordinance, the various districts have been categorized as Conventional Districts, Planned Developments, and Overlay Districts. Each district is established as a specific and exclusive zoning district, and only those uses that are listed as permitted are allowed. If a particular use of the land is not mentioned for a certain district, that use shall be prohibited for that district unless the change is by official amendment approved by Town Council. 3.2 Official Zoning Map The Official Zoning Map shall be maintained in the Office of the Zoning Administrator. A duplicate official Zoning Map shall be kept in the office of the Town Clerk. All zoning district boundaries shall be clearly shown on the Zoning Map, and amendments shall be recorded immediately after adoption. The official copies of the Zoning Map shall be dated and attested by the Town Clerk, and shall be available for public inspection. The official Zoning Map and any amendments adopted by Town Council shall constitute the final authority for determination of zoning district boundaries. It shall be unlawful for any person to make unauthorized changes to the Zoning Map. 3.3 Interpretation of District Boundaries When there is any uncertainty as to the intended locations of any zoning district boundary on the Zoning Map, the Town Staff shall make an interpretation of such map upon request of any person. Any person aggrieved by any such interpretation may appeal such interpretation to the Board of Zoning Appeals. The Town Staff, and the Board of Zoning Appeals, in interpreting the Zoning Map or deciding any appeal shall apply the following standards: • Boundaries indicated as approximately following the centerlines of streets, highways or alleys shall be construed as following such centerlines: • Boundaries indicated as approximately following platted lot lines shall be construed as following such lot lines; • Boundaries indicated as approximately following political boundaries shall be construed as following such boundaries; • Boundaries indicated as following railroad lines shall be construed to be midway between the main tracks or to follow the centerline of single tracks; • Boundaries indicated as following the centerlines of waterways, marshes or ditches shall be construed as following such lines; • Boundaries indicated as parallel to or extensions of features shall be so construed. Distances not specifically indicated on the Official Zoning Map shall be determined by the scale of the map; and 8/15/23 MRB Group Version_4 • Where physical or cultural features existing on the ground are at variance with those shown on the Official Zoning Map, or in other circumstances not covered by this section, the Board of Zoning Appeals shall interpret the district boundaries. 3.4 Lot Divided by District Boundaries No structure or accessory use may be placed, structurally altered, or have a change in use where the structure or use is or would be included within two or more zoning districts unless such structure or use conforms to the requirements of all applicable district regulations. 3.5 Changes 3.5.1 Changes made to zone boundaries or other matters portrayed on the Zoning Map shall be made in accordance with Article 10, Amendments and Rezonings. 3.5.2 The Administrator shall enter changes onto the Zoning Map within a reasonable period of time after a map amendment is approved by the Town Council. Where the ordinance enacting a zone boundary change contains wording explaining or clarifying the location of the new boundary, the Administrator may enter notations on the Zoning Map reflecting the ordinance wording. 3.5.3 No changes of any nature shall be made to the Zoning Map or matter shown thereon except in conformity with the procedures set forth in this Ordinance. Any unauthorized change of whatever kind by any person or persons shall be considered a violation of this Ordinance and punishable as provided by law. 3.5.4 Regardless of the existence of purported copies of the Zoning Map that may from time to time be made or published, the Zoning Map which shall be located in the Department of Planning, shall be the final authority as to the current zoning status of land and water areas, buildings, and other structures in the Town, except in the case of proven errors. 3.5.5 The Administrator shall maintain copies of superseded versions of the Zoning Map for historical reference. 3.5.6 Where Town limit boundaries change by virtue of annexation or some other means, the following provisions shall apply: a. Areas to be annexed into the incorporated limits of Chapin shall be assigned zoning classifications by the Town Council. b. In all cases where additions to the Town’s total area require adjustments in the zoning district boundaries, the adjustment shall be made to the Zoning Map. c. When reductions are made in the Town’s total incorporated area the provisions of this Ordinance shall no longer apply to that area. 3.6 Establishment of Zoning Districts The following zoning districts are herby established: (CONTINUED ON NEXT PAGE) 8/15/23 MRB Group Version_4 Zoning District and Description Illustration (RA) Rural Agricultural District: The intent of the RA district is to establish and preserve areas primarily for agriculture and rural dwellings, forest management and various other low density (.2 d.u./acre) uses on large sites, and to encourage preservation of natural resources and guard against the premature or unreasonable alteration of land resources. This district may be utilized for areas annexed by the Town to preserve the existing rural characteristics, and to prevent urban sprawl. RR, Rural Residential District: RR districts are intended to limit high density development (.5 d.u./acre), and to protect natural and agricultural areas by limiting and regulating commercial development. SR1, Suburban Residential District 1: SR1 districts are intended to be single family residential areas with detached units and low population densities (1 d.u./acre). SR2, Suburban Family Residential District 2: SR2 districts are intended to be single family residential areas with detached units and low population densities (2 d.u./acre). 8/15/23 MRB Group Version_4 SR3, Suburban Family Residential District 3: SFR3 districts are intended to be the medium density (4 d.u./acre) single family residential areas with detached units. TR1, Town Residential District 1: TFR districts are intended for medium density (6 d.u./acre) residential purposes, including single family detached units, duplexes, and triplexes. These uses shall be compatible in size and scale with surrounding residential development. TR2, Town Residential District 2: The purpose of this district is to provide for a mixture of single-family, two-family, triplexes, and other residential uses except multifamily, on smaller lots with a variety of setbacks as well as the location of higher density dwellings (8 d.u./acre) such as zero lot line homes and rowhome developments. TR3, Town Residential District 3: The purpose of the TR3 (12 d.u./acre) district is to establish and preserve multifamily residential uses designed to encourage and continue a stable and healthy environment for residential uses and to exclude uses which are not compatible with such residential uses. 8/15/23 MRB Group Version_4 VC, Village Commercial District: (12 d.u./acre) VC districts are intended for commercial and service uses oriented primarily to serving needs of persons who live or work in nearby areas. A variety of mixed-density residential uses are permitted when paired with commercial uses. TC, Town Center District: (16 d.u./acre) The intent of the Town Center (TC) zoning district is to provide an area for development of an attractive, compact, walkable, mixed- use town center that creates a live/work/play environment for the community. PI, Public/Institutional District: The PI district supports generally non-residential institutions and employment areas that are designed in a campus-like setting, such as hospitals, universities, research facilities, and offices. It is intended to ensure that these unique institutions are designed to be compatible with their surroundings and the rest of the Town. CC, Corridor Commercial: It is the intent of this section that the CC zoning district be developed and reserved primarily as a retail service and commercial area, serving surrounding neighborhoods and larger community or town- wide clientele with a wide range of commercial services, including retail, offices and business support services located in areas which are well served by collector and arterial street facilities as well as pedestrian access facilities where appropriate. IC, Interstate Commercial District: IC districts are intended to provided businesses that serve the traveling public along I-26 such as restaurants, gas stations and hotels/motels, as well as large scale retail and service establishments. 8/15/23 MRB Group Version_4 OC, Office Commercial: OC districts are intended to accommodate a variety of commercial and nonresidential uses characterized primarily by retail, office and service establishments not in the central business area. LI, Light Industrial District: LI districts are intended to permit light manufacturing, industrial, wholesale commercial uses which do not create nuisances by noise or emissions beyond the premises. PD, Planned Development District: PD districts designate an area for which an approved development plan constitutes the district regulations. It is intended to utilize the factors of efficiency, economy, flexibility, creative site design, improved appearance, compatibility of mixed uses, maximum benefits from open space, safe and efficient vehicular and pedestrian access for a development characterized by a unified site design for mixed uses. A planned development district may be predominately residential or predominately commercial. PO, Parks/Open Space District: The open space district is established as a district in which the primary use of the land is predominantly reserved for flood control, future thoroughfare right-of- way, public recreation, community facility sites, airport approaches, natural or man-made bodies of water, forests, and other similar open space uses. 3.7 District Development Standards (Source: Laurel Island PUD, Charleston) 8/15/23 MRB Group Version_4 (ON NEXT PAGE) 8/15/23 MRB Group Version_4 DISTRICT RA RR SR1 SR2 SR3 TR1 TR2 TR3 VC TC PI CC IC OC LI PO LOT CONFIGURATION Lot Width, Minimum 200' 100' 75' 60' 50' 40' 40' 50' 40' None 50' 50' 50' 50' 75' None Lot Size, Minimum 5 acres 2.5 acres 1 acre .5 acre .25 acre 6,000 sq. ft. 6,000 sq. ft 6,000 sq. ft. 4,000 sq. ft. None None None None None 10,000 sq. ft. None Maximum Lot Coverage 25% 25% 25% 30% 45% 70% 70% 75% None None None 70% 70% 70% None None Maximum Density 0.2 d.u./acre 0.5 d.u./acre 1 d.u./acre 2 d.u./acre 4 d.u./acre 6 d.u./acre 8 d.u./acre 12 d.u./acre 12 d.u./acre None N/A N/A N/A N/A N/A N/A PRINCIPAL BUILDING PLACEMENT Front Setback, minimum 50' 50' 25' 25' 25' 15' 10' 0' 0' 0' 25 15 15 25 15 None Front Setback, maximum* None None None None None 25' 25' 25' 15' 10' None None None None None None Side Setback (Corner) 20' 20' 10' 10' 10' 10' 10' 10' None None 10' 15' 15' 15' None None Side Setback 20' 20' 10' 10' 10' 10' 10' 10' None None 10' 15' 15' 15' None None Rear Setback 20' 20' 20' 20' 20' 15' 15' 10' 10' None 25' 25' 25' 25' 25' None Building Height 65' 50' 35' 35' 35' 35' 35' 50' 35' 65' 65' 65' 65' 65' 100' N/A S-48 (Columbia Avenue) From New Bridge to New Road 2*** 30’ 30’ 30’ 30’ 30’ 30’ 30’ 30’ 30’ 30’ 30’ 30’ 30’ 30’ 30’ 30’ US 76 (Chapin Road) From Town Boundary traveling west to S-49 (Clark Street)**** 20’ 20’ 20’ 20’ 20’ 20’ 20’ 20’ 20’ 20’ 20’ 20’ 20’ 20’ 20’ 20’ US 76 (Chapin Road) From S-49 (Clark Street) to S-29 (Saint Peters Church Road)**** 45’ 45’ 45’ 45’ 45’ 45’ 45’ 45’ 45’ 45’ 45’ 45’ 45’ 45’ 45’ 45’ US 76 (Chapin Road) From S-29 (Saint Peters Church Road) to Town Boundary traveling west**** 10’ 10’ 10’ 10’ 10’ 10’ 10’ 10’ 10’ 10’ 10’ 10’ 10’ 10’ 10’ 10’ ACCESSORY BUILDING PLACEMENT Front Setback** None None 0' 0' 0' 5' 5' 5' 10' 10' 0' 10' 10' 10' None None Side Setback (Corner) 10' 10' 5' 5' 5' 5' 5' 5' 5' None 5' 5' 5' 5' 5' 5' Side Setback 10' 10' 5' 5' 5' 5' 5' 5' 5' None 5' 5' 5' 5' 5' 5' Rear Setback 10' 10' 5' 5' 5' 5' 5' 5' 5' None 5' 5' 5' 5' 5' 5' Height*** *A minimum of 80 percent of the front façade must be located within the maximum front setbacks **The front setback for accessory buildings shall start at the principal façade of the principal use. ***The height of an accessory building shall not be greater than the height of the principal building, unless located in a Public Institutional (PI) or Light Industrial (LI) zoning district. **** Based on the plans provided in the SCDOT S-48 (Columbia Avenue) Corridor Improvement Project and on plans by SCDOT to perform a feasibility study, potentially resulting in the widening of US 76 (Chapin Road). 8/15/23 MRB Group Version_4 3.8 General Lot and Building Standards 3.8.1 Standards Not Exclusive In addition to the lot and building provisions in this article, standards for lots and buildings in related building and fire codes may also apply. 3.8.2 Interpretation of Fractional Measurements When any requirement of this ordinance results in a fraction of a unit, a fraction of ½ or more shall be considered a whole unit and rounded up to the nearest whole number. 3.8.3 General Lot Standards a. Lot Occupancy: No building shall hereafter be erected, altered or moved to occupy a greater percentage of lot area than is permitted within the zoning district in which it is or will be located. b. Lot Reduction: No lot shall be reduced in size which will not maintain the total lot area, lot width, necessary yards, courts or other open space, lot area per dwelling unit or other requirements of this article. c. Yard Use Limitations: No part of a yard, court or other open space or off- street parking required in connection with any building for the purpose of complying with the regulations of this article shall be included as part or all of the required yard, court, or other open space or off-street parking for another building or structure, except as provided in this article. 3.8.4 Lot Setbacks a. Irregular Lots: The location of required setbacks on irregularly shaped lots shall be determined by the Town Staff in accordance with the following provisions: 1. Irregular Lot Lines: Generally, side lot lines shall be perpendicular or radial to the street right-of-way, and rear lines should be approximately parallel to fronting right-of-way lines. Irregularly shaped lots shall be permitted at the discretion of the Administrator when unique site conditions exist. 2. Irregular Lot Setbacks: The location of required front, side, and rear yards (or setbacks) on irregularly shaped lots shall be determined by the Administrator, based on the prevailing spacing of buildings on the adjacent parcels. Where questions arise as to appropriateness, the applicant may be requested to provide additional design information. b. Double- and Triple-Frontage Lots: On lots with two street frontages, not located at a corner, or with three frontages and located at a corner, the front setback will apply to both the street that the building derives its address from, in addition to the opposite, parallel street. This does not apply to lots located on a corner with a rear alley. Double- and Triple Frontage lots shall base their setback regulations based on the street that it derives its address from. Double frontage lots shall be avoided except in commercial zones, where essential to provide separation of residential 8/15/23 MRB Group Version_4 development from railroad or major street right-of-way or from non-residential uses or where necessary due to topography. Where a railroad or major thoroughfare right-of-way, as shown on the major thoroughfare plan, abuts or runs through any portion of the subdivision, the subdivision plat shall provide for either a minor street or lots backing onto said right-of-way having a minimum depth of two hundred (200) feet c. Flag Lots: The use of flag lots in residential subdivisions shall be permitted only if dictated by the terrain. Flag lots shall not be permitted to solely allow an increase in the number of lots. The access drive to a flag lot shall have a minimum width of 30 feet and shall be a deeded part of the lot so accessed. No two flag lots may abut or converge at the (poles) street right- of-way d. Corner Lots: Corner lots shall be at least five (5) feet wider than interior lots; provided however, the maximum required width of corner lots shall be one hundred (100) feet (need dimensional standards footnote). The minimum side building setback distances shall be at least the minimum front building setback distance for the side adjacent to the street e. Setbacks from Designated Corridors: Setbacks shall be measured from the future right-of-way established for specifically-designated streets in an adopted corridor plan or subdivision if the adopted plan shows, at a minimum, the horizontal alignment of the future roadway, pedestrian and bicycle amenities, streetscape improvements and necessary right-of-way, and other applicable requirements. f. Residential variances and restrictive covenants: The Town Staff shall only grant an Administrative Adjustment (Section 10.10) for a lot size or setback requirement that conforms to the restrictive covenants of a subdivision existing at the time of the adoption of this chapter or at the time of annexation into the town. 3.8.5 Infill Lot Setbacks In certain neighborhoods, historic setbacks do not conform to current standards. It is the intent of the UDO to create predictability within blocks and not reduce or enlarge setbacks where existing precedents are present. The Town Staff shall have the authority to determine setback for infill lots to ensure compatibility with adjacent structures unless superseded by an adopted plan 3.8.6 Encroachments The features listed below shall be permitted to encroach into a required yard or right-of-way, as applicable. Nothing in this section shall be misconstrued to conflict with any other portion of this Ordinance. a. Encroachment over Sidewalks: With approval of the City, county or SCDOT (whichever has authority over a street), awnings, arcades, canopies, and galleries, may encroach over the sidewalk to within 2 feet of the curb, but they shall provide a vertical clearance of at least 8 feet from any sidewalk. 8/15/23 MRB Group Version_4 This encroachment is only permitted in the Town Center (TC), Village Commercial (VC), and Town Residential Districts (TR1, TR2, and TR3). b. Upper Story Encroachments: Bay windows, balconies, and similar features projecting from the principal building may encroach up to 50% of the depth of the front and street side setback. With approval of the City, county or SCDOT (whichever has authority over a street), upper-story balconies or bay windows may encroach over the right-of-way a maximum of 3 feet, but they shall provide a vertical clearance of at least 8 feet from any sidewalk. This encroachment is only permitted in the Town Center (TC), Village Commercial (VC), and Town Residential Districts (TR1, TR2, and TR3). c. Lower Story Encroachments: Cornices, eave overhangs, chimneys, flues, bay windows, and similar projections (including gutters) may encroach up to 2 feet into any required yard. d. Covered Porches: Covered porches may encroach a maximum of 8 feet into any required front yard or street side yard setback and to within 5 feet of any interior side or rear yard property line. e. Uncovered Porches, Decks, Patios, Steps and Stairs: Uncovered and unenclosed porches, decks, patios, steps and stairs, and other similar features may encroach to within 5 feet of any interior side and rear property line. Steps and stairs may encroach up to 100% of the depth of any required street yard setback, but may not encroach upon any public sidewalk. f. Walkways and Driveways: Uncovered and unenclosed walkways, and driveways may encroach up to 100% of the depth of any required setback, unless a buffer (Section 7.5) is required. g. Handicap Ramps and Lifts: Ramps, lifts, fire escapes, or other required accessibility structure by the fire or building code that is attached to the exterior of a building may encroach into any required yard but may not be closer to any property line than 5 feet. Such features shall not be located in a front yard if it is possible to accommodate them in a side or rear yard. h. Mechanical Equipment: Mechanical equipment such as pool pumps, ventilation systems, heating and air conditions units, tv antennas, and satellite dishes, and other similar equipment determined by the administrator, may encroach up to 25% into a required side or rear yard. Mechanical Equipment shall comply will screening requirements in Section 7.3.9. i. Fences and Garden Walls: Fences and garden/yard walls may encroach into required setbacks. The support structures for fences shall be located on the inside of the fence, and no fence, wall or hedge shall exceed the following dimensions: 1. In all districts fences within the front or street side setback shall be a maximum of 4’ in height. 8/15/23 MRB Group Version_4 a. In the Light Industrial (LI) zoning district parcels fronting a Primary Street may have fences or walls up to 6 feet in height. Parcels fronting all other streets may be up to 10 feet in height. b. When residential uses are adjacent to commercial, industrial, or other nonresidential use, the administrator may increase this height requirement to 7’. 2. Side or rear setback of residential districts: Privacy fences or walls may be a maximum of 8’ in height. 3. Side or rear setbacks of nonresidential and industrial: Fences or walls may be a maximum of 10’ in height. j. Mailboxes: Mailboxes may encroach into a front setback area. 3.8.7 Measurement of Height a. Building Height: Building height is measured as the vertical distance from the mean grade elevation taken at the fronting street side of a structure to the roof line of a flat roof, the ridge of a pitched roof, or the deck line of a mansard roof. b. Under-roof areas with dormers shall be counted as half-stories. c. Exemptions from Building Height Requirements: Unless specifically stated otherwise elsewhere in this ordinance, the height requirements established in this ordinance shall not apply to: 1. Building elements (such as church spires, towers, cupolas, domes, etc.) not intended for human occupancy; 2. Structures that are an accessory to institutional uses (such stadium press boxes); 3. Water towers, transmission towers, and observation towers, unless otherwise regulated in this ordinance; 4. Flagpoles, masts, and antennas (not otherwise regulated elsewhere); and 5. Mechanical penthouses not exceeding 15 feet in height which are set back at least 20 feet from the front elevation of the building, and not visible from view from the public right-of-way. d. Other Height Requirements: Height requirements for signs, lighting, landscape screens, and all other structures or objects for which a dimensional height requirement is established by this ordinance shall be measured as the vertical distance from the highest ground level at the structure or object’s foundation to its highest point. 8/17/23 – MRB Group – Version_9 1 Article 4 – Land Use Provisions 4.0 Land Use Provisions 4.1. Purpose and Intent The use provisions in this chapter indicate which uses and activities are permitted by right, permitted with conditions, permitted by special exception, and prohibited. The provisions are intended to produce the desired development outcomes for each district as set forth in the Comprehensive Plan and in Article 3 – Zoning Map and Districts. 4.2. Applicability No land, building or structure, including signs, shall be used or occupied, and no building or sign shall be constructed, altered or moved, unless in conformity with the regulations herein specified for the particular zoning district. 4.3. Table of Permitted Uses 4.3.1. Use Permissions Defined The Use Table in Section 4.3.2 assigns one of the following permissions to each use in each district: a. Permitted Use (P) The use is permitted by-right, with no additional conditions or requirements. b. Existing Buildings Only (E) The use is permitted in existing buildings only and is considered a legal nonconforming use. Any expansions over 20% to the gross floor area, or renovations exceeding parameters in regulated by Article 11. c. Conditional Use (C) The use is permitted, provided that the additional use conditions set forth in this article are met. 1. The specified conditions are intended to ensure that these uses are compatible with other development permitted within the districts. 2. Approval procedures for conditional uses are in Section 10.4, Zoning Permit. d. Special Exception (SE) The use is permitted only when a Special Exception has been approved. 1. Special Exceptions are required for uses that may be compatible with other uses permitted in a district, but which, because of their unique characteristics or potential impacts on the surrounding neighborhood and/or the Town as a whole, require individual consideration in their location, design, configuration, and/or operation at the particular location proposed. 2. All applications for Special Exceptions shall, at a minimum, meet the standards for the district in which they are located and the additional standards set forth in this article for that use. There may also be specific building design standards that must be met (Article 6). 3. Approval procedures for Special Exceptions are found in Section 10.11. e. Prohibited Uses (blank) The use is prohibited in the specified district 8/17/23 – MRB Group – Version_9 2 4.3.2. Table of Permitted Uses (PAGE INENTIONALLY LEFT BLANK) 8/17/23 – MRB Group – Version_9 3 SECTION 4.3.2 - TABLE OF PERMITTED USES Type of Use RA RR SR1 SR2 SR3 TR1 TR2 TR3 VC TC PI CC IC OC LI PO Code Section AGRICULTURAL 4.4.1 Horticultural nursery C C C C 4.4.1 .a Agricultural Uses or Animal Production C C 4.4.1 .b CAFO SE 4.4.1 .c Campground C C C 4.4.1 .d RV Park SE SE 4.4.1 .e RESIDENTIAL USES 4.4.2 Accessory Dwelling Unit C C C C C C C 4.4.2 .a Bed and Breakfast Residence (5 or less) C C C C C C 4.4.2 .b Bed and Breakfast Inn (6-10) C C C C C C 4.4.2 .c Conservation Subdivision C C C C C 4.4.2 .d Day Care Home - Large (6-10) SE SE SE SE SE SE SE P P P 4.4.2 .e Day Care Home - Small (5 or less) SE SE P P P P P SE SE C C C Dwelling, Detached Single Family P P P P P P P E C E Dwelling, Two-Family P P P E C E Dwelling, Three-Family C P P C C 4.4.2 .g Dwelling, Multi-Family C P C C 4.4.2 .f Group Home - Large (8 or more) SE SE SE SE SE SE SE SE 4.4.2 .h Group Home - Small (7 or less) C C C C C C C C 4.4.2 .h Manufactured Home C C C 4.4.2 .i Manufactured Home Park SE Nursing Homes SE SE P P P P P P Rowhome P P P C C Short Term Rental C C C C C C C 4.4.2 .k COMMERCIAL 4.4.3 Automobile Service Station, Major C C 4.4.3.a Automobile Service Station, Minor C C 4.4.3.a Automobile, ATV, Motorcycle, or Boat Sales C C P 4.4.3.b Automotive Parts Stores P P Bar or Night Club SE SE C C C C 4.4.3.c Car Wash C P 4.4.3.d Catering Service C C P C 4.4.3.e Check Cashing SE 4.4.3.f Commercial Day Care Center C C SE SE SE SE SE P P 4.4.3.g Convenience Store C C C P P 4.4.3.h Drive-In Theater Dry Cleaning C P P 4.4.3.j Financial Institutions C P P P P Funeral Homes C C P P 4.4.3.k Garden Centers SE P P General Retail C C C C P P 4.4.3.l Hardware Stores C P P 4.4.3.m Hotels/Motels C C P P P 4.4.3.n 8/17/23 – MRB Group – Version_9 4 Type of Use RA RR SR1 SR2 SR3 TR1 TR2 TR3 VC TC PI CC IC OC LI PO Code Section Indoor Storage P P Liquor Stores C C P P 4.4.3.o Microbrewery, Micro-Distillery, Micro-Winery C C C P P C 4.4.3.p Miniature Golf C 4.4.3.q Mixed-Use Building P P Office Building C SE SE C C P 4.4.3.s Office, Medical C P P P P P 4.4.3.r Office, Non-medical C P P P P P Outside Display/Sales C C P P 4.4.3.t Parking Lots C C C C C 4.4.3.u Personal Service C P P P P C 4.4.3.v Pet Boarding C SE SE P P 4.4.3.w Restaurant, Full Service C C P P P P 4.4.3.x Sexually Oriented Businesses SE SE Specialty Retail C P P P P 4.4.3.y Tattoo Parlor SE 4.4.3.z Tobacco Stores C P C 4.4.3.aa Vape, E-Cig, store and lounges SE SE SE 4.4.3.bb Veterinarian C C C P P P 4.4.3.cc INSTITUTIONAL, CIVIC, OR PUBLIC 4.4.4 Amphitheaters SE C P C C C 4.4.4.a Cemetery and Mausoleums P P C P SE SE SE SE 4.4.4.b Civic and Social Organizations C SE SE SE SE P P P P P P 4.4.4.c Colleges, Universities, and Vocational Schools C SE SE P P P C 4.4.4.d Elementary Schools SE SE SE SE SE SE SE SE SE SE SE SE SE SE Farmers Market, Indoor C C C C P P P C 4.4.4.e Farmers Market, Outdoor C C C C C C C C P P P P C P 4.4.4.e Golf Course P P SE SE SE SE SE Government Building or Facility C C C P P P P P P P 4.4.4.f Hospital C SE P P P P 4.4.4.g Kindergarten or Pre-school SE SE SE SE SE SE SE SE SE SE SE SE SE SE Parks and Open Space P P P P P P P P P P P P P P P P Public Utility Stations P P P P SE SE SE SE SE SE P P P P P SE Recreational Facilities P P SE P P P Religious Assembly P P P C C C C C C P P C P 4.4.4.h Secondary Schools SE SE SE SE SE SE SE SE SE SE SE SE SE SE Sports Stadium SE SE P P P 4.4.4.i Theater C C P P P Transportation Terminal (Bus and Rail) SE SE SE SE P P SE P SE INDUSTRIAL 4.4.5 Animal Shelters P P SE SE P P Correctional Facility SE SE SE SE SE Crematory SE SE SE P Heavy Equipment Rental SE C C P 4.4.5.a 8/17/23 – MRB Group – Version_9 5 Indoor Shooting Range SE SE SE SE SE Type of Use RA RR SR1 SR2 SR3 TR1 TR2 TR3 VC TC PI CC IC OC LI PO Code Section Junk Yard or Scrap yard SE SE Manufacturing or Production Facility P Outdoor Shooting Range SE SE SE Outdoor Storage SE SE SE C Repossession Services C C P 4.4.5.b Telecommunication Tower SE SE SE SE SE SE 4.4.5.c Truck Sales and Service SE C P 4.4.5.d Warehouse SE C P 4.4.5.e Wholesale Trade SE P P 8/17/23 – MRB Group – Version_9 6 4.3.3. Multiple Principal Buildings or Uses Per Lot When all principal uses of a development fall within one use category, the entire development is assigned to that use category. When the principal uses of a development fall within different use categories, each principal use is classified in the applicable category and each use is subject to all applicable regulations for that category. 4.3.4. Unlisted Uses Where proposed development contains a use not listed within the Use Table in Section 4.3.2, the Administrator shall determine the most similar listed use and to apply the standards of such use. This determination shall be based on the definitions contained in this Ordinance, the purpose and intent of the respective zoning district, characteristics of the use including hours of operation, employees, required floor area, building or site arrangement, and any commonly accepted use-based guides (e.g., North American Industrial Classification System (NAICS), Institute of Transportation Engineers (ITS) Trip Generation Guide), and may be appealed using the process identified in Section 10.13. 4.4. Conditional Use and Special Exception Standards 4.4.1. Agricultural Uses a. Horticultural Nursery 1. Lot Size: Minimum 2 acres 2. Sale of Produce: Produce stands shall be setback at least 25 feet from the edge of pavement or the back of curb, and shall be located entirely within private property. If the applicant is not the owner of the property in which the produce stand is located, they must have written authorization to use the site. The Administrator may request additional information to ensure health and safety measures are met. 3. Animals: Any use under this classification shall not butcher or otherwise prepare meat for individual sale on-site. All sale of livestock and agricultural products shall adhere to all applicable local, state, and federal regulations. b. Agricultural Uses or Animal Production 1. Lot Size: Minimum 2 acres 2. Sale of Produce: Produce stands shall be setback at least 25’ from the edge of pavement or the back of curb, and shall be located entirely within private property. If the applicant is not the owner of the property in which the produce stand is located, they must have written authorization to use the site. The Administrator may request additional information to ensure health and safety measures are met. 3. Animals: Any use under this classification shall not butcher or otherwise prepare meat for individual sale on-site. All sale of livestock shall adhere to all applicable local, state, and federal regulations. c. CAFOs 1. Location: No structure or other facility of a CAFO for swine shall be located closer than one thousand (1,000) feet to the adjoining property line, unless the 8/17/23 – MRB Group – Version_9 7 titleholder of the adjoining land executes a waiver with the titleholder of the land where the CAFO for swine is established or proposed to be established, under terms and conditions that the parties negotiate. However, if the CAFO for swine is located on the adjoining property or within one thousand (1,000) feet of a proposed facility, the property line setback applicable to the proposed facility cannot be reduced by consent of the adjoining property owner. CAFOs for swine shall be located no closer than two thousand (2,000) feet from the outer edge of a lake, river or stream, including ephemeral, intermittent, and perennial streams as defined by the SC Forestry Commission. CAFOs for swine containing one million (1,000,000) pounds (normal production live weight) or more shall be separated a distance of twenty-five (25) miles. CAFOs for swine containing more than five hundred thousand (500,000) pounds but less than one million (1,000,000) pounds shall be separated a distance of not less than two (2) miles 2. Setbacks: Setback and separation standards for CAFOs for animals other than swine shall be as required by the regulations of the state department of health and environmental control. 3. Wind Studies: The Administrator may require a wind study to be completed, by a certified professional with experience with conducting wind studies, to ensure that nearby properties are not negatively affected by the use. d. Campground 1. Lot Size: Minimum of 5 acres 2. Maximum Density: For permanent, habitable, structures, 4 units are permitted per acre. Individual campsites may not exceed 8 campsites per acre. All permanent structures shall be required to have a valid certificate of occupancy. 3. Maximum Stay: No person or tent may occupy the campground for a period in excess of 30 calendar days in a 90-calendar day period. 4. Operation: A register of all occupants, the space occupied, and the time of arrival and departure shall be maintained by the on-site manager. 5. Recreation: All campgrounds shall have a recreational element such as access to trails, horse riding, hunting, fishing, kayaking or other similar activity commonly associated with outdoor activities. All activities shall have the proper state and federal licenses, when required. 6. Infrastructure: A central service building containing all necessary toilets, bathhouses and other plumbing fixtures specified in the most current edition of the Plumbing Code, as amended, shall be provided. a. Cabins: If a campground only contains cabins, as described within this section, the requirement for a central service building may be waived by the Administrator. 7. Buffer: All spaces for camping and recreational vehicles shall be located at least 150 feet from any nearest property line. 8. Dumpster: The site shall have adequate, regular trash collection from a centrally located dumpster. The dumpster shall be enclosed (per Section 7.3.9.b) and secured to prevent windblown litter or access to animals. 8/17/23 – MRB Group – Version_9 8 e. Recreational Vehicle (RV) Parks 1. Lot Size: Minimum of 5 acres 2. Maximum Units: Eight (8) units per acre 3. Maximum Stay: No RV may occupy the park for a period in excess of 90 calendar days in a 120-calendar day period. 4. Individual lots: Each leasable lot for a RV shall be a minimum of 35feet wide. 5. Parking: One off-street parking space per individual leasable lot. 6. Accessory Buildings: No accessory buildings used for bathrooms, utilities or other supporting infrastructure shall be permitted for occupancy. a. Bathroom: All parks shall have adequate toilet facilities b. Recreation: All parks shall have a recreational element with access to trail, water feature, picnic tables, playgrounds, or similar feature. 7. Fire Apparatus Access Road: Shall provide fire access roads per South Carolina law. 8. Fire Hydrant: Shall provide fire hydrant systems when served by a public water system. Any requirements by the Lexington County Fire Marshal shall supersede the requirements in this section. 9. Land Disturbance: All land disturbance activities shall receive all applicable local, state, and federal permits prior to the work being commenced. 10. Buffer: All RVs within the park shall be setback a minimum of 150 feet from property lines. A Type C landscape buffer, as defined in Article 7, shall be required within this setback. 11. Dumpster: The site shall have adequate, regular trash collection from a centrally located dumpster. The dumpster shall be enclosed and secured to prevent windblown litter or access to animals. 12. Condition of Vehicles: All RVs shall be operable and moveable. Non-operable or immoveable vehicles shall be removed from the site within 10 days of non- operability or state of immovability. No RV is permitted to be added-on to, or, be permanently affixed to utilities. 4.4.2. Residential Uses a. Accessory Dwelling Units 1. General Standards: Shall be subordinated in size, scale, and orientation relative to the principal use. 2. Materials: Shall be composed of the same or similar or compatible materials as the principal use. Similar or compatible materials shall be determined by the applicable review entity. b. Bed and Breakfasts 1. Applicability: The regulations in this section apply to both Bed and Breakfast Inns and Residences. 2. Operation: The use shall be owner-occupied. No hourly rates shall be permitted. Overnight, weekly, or monthly rates are permitted. 3. Register: The owner shall maintain a register of guests, including name, address, and date of occupancy, including check-in and check-out. 8/17/23 – MRB Group – Version_9 9 4. Licenses: The resident owner shall obtain a business license with a valid Certificate of Occupancy. 5. Design: The principal structures shall retain its single family to remain compatible within the district that it is located. This condition applies when a residence is constructed or converted to become a Bed and Breakfast, and also when an existing Bed and Breakfast is expanded. 6. Accessory Structures: Short term rental units may be permitted within already approved and compliant accessory dwelling unit. Manufactured Homes may not be used for a Bed and Breakfast, Inns or Residences. 7. Meals: The owner shall provide a meal for breakfast to all guests. Meals shall only be served to registered guests. 8. Bed and Breakfasts with Commercial Meeting Privileges: Shall adhere to all regulations in Section 4.4.2.b above. Additionally, the hosting of events such as weddings, business meetings, retreats, reunions, and other organized events shall only be permitted with the following conditions: a. Location: Only permitted in Rural Agricultural (RA), Rural Residential (RR), Town Residential 1 (TR1), Town Residential 2 (TR2), and Town Residential 3 (TR3) districts. b. Operation: The home’s principal use is residential. The operation of the facility does not incur repeat or reoccurring violations to the Town’s noise ordinance, or other Ordinances of the Town. Such repeat violations may result in suspension or revocation of the business license. c. Minimum lot size: .5 acre, unless the applicant demonstrates conformance with the below parking requirement and receives the applicable approval from the Fire Marshal. d. Parking: The site can accommodate at least 50 on-site parking spaces. Parking surfaces may be unimproved, however a site plan showing parking spaces, circulation patterns, and means of ingress and egress shall be required and evaluated by the Administrator prior to issuances of a permit. c. Conservation Subdivision 1. See Article 5 for land development regulations for Conservation Subdivisions. d. Day Care Homes 1. Applicability: The following regulations are applicable to both Small and Large Day Care Homes: a. Must have a playground or other outdoor recreational equipment b. The playground or outdoor play area shall be enclosed by a fence or wall. All access shall be secured from the exterior. Similar methods for securing outdoor play areas may be considered by the Administrator if the applicant implements best practices for Crime Prevention Through Environmental Design (CPTED). c. Shall receive all applicable Federal, State, and Local licenses, such as a license from the South Carolina Department of Social Services. Proof of approval from applicable agencies shall be provided to the Administrator at the time of application. 8/17/23 – MRB Group – Version_9 10 2. Applicable to Large Day Care Homes: a. Lot Size: Minimum 20,000 square foot lot e. Dwelling, Detached Single-Family 1. Applicable to Village Commercial (VC): Shall have a commercial component, and fall under the live/work use definition. Commercial components include home occupations, short term rentals, day cares or Bed and Breakfast uses. The commercial space shall front the street, the residential portion shall be either in the rear or the second story of the live/work unit. Building design shall be compatible with surrounding properties in terms of scale, orientation, massing, setback, and material composition. Access from alleys or from the rear is encouraged, when alley is already present and contiguous to the lot alley access is required. f. Dwelling, Multi-Family 1. Building Design: Requires a Major Architectural Review (Section 10.6). 2. Buffers: Shall comply to standards in Article 7. 3. Mixed-Use: Multi-family units above first-floor commercial uses are required within the Town Center (TC) and Village Commercial (VC) districts. 4. Open Space Requirements: Shall provide on-site amenities for residents such as dog parks, gyms, plazas, courtyards or other similar features as permitted by the reviewing entity. g. Dwelling, Three-Family 1. Building Design: Requires a Major Architectural Review (Section 10.6). h. Group Home 1. License Required: Shall be licensed and regulated by all applicable Federal, State, and Local agencies. Proof of licensure shall be provided to the Administrator. 2. Operation: Shall be well maintained inside and outside, be safe and sanitary, and not be occupied by a person who would constitute a direct threat to the health and safety of other persons. The minimum stay of each occupant, excluding employees, shall be no less than 30 days. 3. Spacing: Group Homes located within Suburban Districts (SR1, SR2, and SR3) shall not be located within a radius of three thousand (3,000) feet of another Group Home, as measured from the nearest point of the existing home property line to the property line of the proposed home. Group Homes located within all other districts shall be not be located within a radius of one thousand (1,000) feet of another Group Home. 4. Group Home Large (8 or more) a. Minimum Lot: 30,000 sq. ft. b. Emergency Services: Shall demonstrate that the use is serviceable by the appropriate emergency service depending on services offered by the Group Home. i. Manufactured Homes 8/17/23 – MRB Group – Version_9 11 1. Applicability: Any manufactured home constructed before July 1, 1970, must be approved by Underwriters’ Laboratories and any manufactured home constructed after that time must meet all applicable state and federal standards 2. As an Accessory: Manufactured Homes shall not be used as an accessory dwelling unit, unless within a Rural Residential (RR) and Rural Agricultural (RA). 3. Design Standards a. All manufactured home shall have a permanent and continuous foundation enclosure, unpierced, except for required ventilation and access, shall be installed. The enclosure may consist of brick, or other masonry, or wood. b. Any wood framing for foundation skirting shall be constructed with treated lumber. The foundation or skirt shall be in compliance with all applicable codes and regulations. c. Any tongue, axles, running lights, and removable towing apparatus must be removed or screened prior to the issuance of a certificate of occupancy. d. Roofs must be covered with a material that is customarily used on site-built dwellings. The pitch of the main roof shall not be less than 3:12. Minimum overhang of eaves shall be twelve (12) inches. e. Exterior siding shall be wood, vinyl, metal horizontal siding, brick, fiber cement board, stucco, or similar materials. Smooth, ribbed, or corrugated metal or plastic panels, exposed plywood, and materials with a high-gloss finish are not permitted. f. All such units shall be required to have adequate sanitary facilities with such facilities being properly connected to the sanitary sewer system of the town and be served by a separate electric meter. Exceptions for septic systems may be granted where no existing sanitary sewer system connections are available and approval is granted from the South Carolina Department of Health and Environmental Control (SCDHEC). g. Minimum width of the manufactured home as assembled on the site shall not be less than 20 feet, as measured across the narrowest portion. j. Manufactured Home Parks 1. Minimum Lot Size: 2 acres 2. Infrastructure: The site shall be served by public water and sewer facilities when connections are available. Exceptions for septic systems may be granted where no existing sanitary sewer system connections are available and approval is granted from the South Carolina Department of Health and Environmental Control (SCDHEC). 3. Emergency Services: Shall be within the service area of police, fire, and ambulatory services and supply a document to the Administrator stating the availability of services. 4. Security: On-site security operating 24 hours a day, 7 days a week is required. 5. Minimum Width of Leasable Lot: 40 feet. 6. Open Space: 20% of the total land shall be devoted to open space. Types of permitted open or green spaces can be found in Article 5. 8/17/23 – MRB Group – Version_9 12 k. Short Term Rental 1. Inspection Required: All short-term rental units shall have a valid Certificate of Occupancy on file at all times. 2. Operation: Meals may be served only to registered guests, their visitors, and private contracted gatherings. All licenses relating to the operation of a short-term rental shall be obtained. The owner shall display the business license number on any online listing. 3. Record: The resident owner shall maintain a guest register to include names, addresses, and dates of occupancy of all guests. 4. Parking: For every rentable unit, one on-site parking space must be provided unless located in the Town Center or Village Commercial zoning district. On-street parking may be allowed on a case by case basis. Short term rentals within the Town Center are exempt from this parking requirement. 4.4.3. Commercial Uses a. Automobile Service Stations 1. Fuel Sales: Fuel pumps may be an accessory to Automobile Service Stations. Fuel sales as an accessory to Grocery Stores shall be permitted per the accessory use table in Section 4.5.2. 2. Screening of Vehicles: All vehicles being stored on the property for the purposes for repair, service, or maintenance shall be located in the rear of the building and screened from the public right-of-way, and adjacent property 3. Canopy and Fuel Pumps: Shall be oriented to the side or rear of the principal structure. b. Automobile, ATV, Motorcycle, or Boat Sales 1. Parking of Vehicles: No vehicles shall be stored on an unimproved surface, required buffer, berm, or landscaping feature. No vehicle shall be elevated for the purposes of advertising, by any means, above the parking grade. Vehicles for repair shall be stored in the rear or side, screened from the public right of way, and adjacent property. No vehicle undergoing repair services, under any circumstance, should be on-site for more than 90 days. 2. Service Bay Doors: Repair of vehicles or boats shall occur within an enclosed building. Service bay doors shall not be visible from the public right-of-way. If service bay doors face a residential property, they shall be opaquely screened from view. c. Bars and Nightclubs 1. Location: Shall not be located within 250 feet, as measured from nearest property line, to a Suburban Residential (SR1, SR2, and SR3) district. Shall not be located within 500 feet of a place for religious assembly or school, unless located within the Town Center or Village Commercial district. 2. Accessory: A bar may be considered an accessory to a primary use, such as a hotel or restaurant. When associated with a restaurant, alcohol sales may not exceed 50% of total sales within a given day. If sales exceed 50% of total sales, 8/17/23 – MRB Group – Version_9 13 then the owner shall apply for a certificate of zoning compliance from the Zoning Administrator as the use has changed. d. Car Wash 1. Location of Service Areas: Locations of bays for vacuums and other equipment shall be placed on the side or rear of the principal building. Drying fans shall be placed so as to reduce the impact of noise audible on adjacent property as much as possible. e. Catering 1. Operation: The sale of individual meals for general public shall be classified as a full-service restaurant and not a catering service. 2. Home Occupation: If tied to a home occupation, the applicant shall adhere to all requirements of Home Occupations (Section 4.5.3.n) f. Check Cashing 1. Location: Shall not be closer than 1,000 linear feet from the nearest check cashing, title loan, pawn shop, or other similar establishment, as determined by the Administrator. g. Commercial Day Care Center 1. Minimum Lot Area: 20,000 square feet 2. Indoor Area: The building shall contain a minimum of 35 square feet of floor area for each child, based on maximum enrollment. 3. Playground: Outdoor playground equipment is required. All outdoor play areas shall be enclosed by a fence or wall no less than 4 feet in height and shall form the defined perimeter of the play area. Any access points along the fence or wall shall be locked. No play areas shall be permitted in the side or front yard. h. Convenience Store 1. As an Accessory Use: Shall be permitted in Automobile Service Stations. 2. Applicable to Rural Agricultural (RA) and Rural Residential (RR): a. Size: 10,000 sq. ft. maximum gross floor area. b. Emergency Services: Shall demonstrate that the use is serviceable by emergency services to include ambulatory, fire, and police. c. Operation: May include the processing of wild game, as defined by the South Carolina Department of Natural Resources (DNR), however the area dedicated to processing shall not exceed 25% of the gross floor area of the use. This shall not be misconstrued as meat processing or food processing facility as defined by the State of South Carolina. Encouraged to sell recreational items that relate to the natural amenities of surrounding areas such as kayaks, fishing poles, camping supplies, and other similar products. i. Drive-in Theaters 1. Lighting and Noise: The applicant shall submit documents that demonstrate that the adjacent properties will not be negatively affected by the operation of this use. These documents may be photometric or noise study conducted by a professional with experience within this field. 2. Surface: The surface materials of the use may be made of a pervious material, unless otherwise prevented by the stormwater regulations of the Town. 8/17/23 – MRB Group – Version_9 14 3. Concessions: Beverages and food service may be an accessory use. 4. Site Plan: The applicant shall submit a site plan detailing parking, landscaping, location of utilities, vehicular and pedestrian circulation paths, and other details as requested by the Administrator. j. Dry Cleaning 1. Storage: No outdoor storage or displays are permitted 2. Truck Loading or Delivery Areas: All areas for the purposes of loading, unloading, and deliveries shall be located in the rear of the use and be screened from adjoining properties. k. Funeral Homes 1. Applicable to Rural Agricultural (RA) and Rural Residential (RR): a. Accessory Use: May have an attached crematory, however it shall not be more than 25% of the gross floor area of the funeral home b. Maximum Size: 10,000 sq. ft. l. General Retail 1. Truck Loading or Delivery Areas: All areas for the purposes of loading, unloading, and deliveries shall be located in the rear of the use and be screened from adjoining properties. 2. Applicable to Rural Agricultural (RA) and Rural Residential (RR) a. Size: 10,000 sq. ft. maximum gross floor area m. Hardware Store 1. Applicable to Village Center (VC): No outdoor storage of materials, equipment, or vehicles permitted. Items for sale may be permitted against the exterior walls of the use, however it shall not obstruct any pedestrian sidewalks or vehicular circulation. n. Hotels or Motels 1. Accessory Uses: Permitted to have any accessory use that is otherwise allowed in the zoning district in which the principal use is located. 2. Types of Accessory Uses: Uses accessory to Hotels shall be bars, restaurants, salons, gyms, and other compatible uses that retain the character of the district 3. Location of Accessory Uses: Shall be located on the first floor and have their own separate means of ingress, unless specifically for the utilization of hotel guests. Rooftop, waterfront, or other type of accessory uses that take advantage of scenic views or natural features shall be permitted, as long as there is no conflict with other regulations within this Ordinance. 4. Operation: No hourly rates shall be permitted. Overnight, weekly, or monthly rates are permitted. 5. Applicable to Rural Agricultural (RA) and Rural Residential (RR): a. Size: 10,000 sq. ft. maximum gross floor area b. Operation: No hourly rates shall be permitted. Overnight, weekly, or monthly rates are permitted. c. Emergency Services: Shall demonstrate that the use is serviceable by emergency services to include ambulatory, fire, and police. o. Liquor Stores 8/17/23 – MRB Group – Version_9 15 1. Location: Shall not be located within 300 linear feet of a church or school, except when located within a Town Center (TC). Shall not be located within 1,000 linear feet of another liquor store. p. Microbrewery, Micro-Distillery, Micro-Winery 1. Location: Shall not be located within 1,000 linear feet of a church or school, except within a Rural Agricultural (RA) and Rural Residential (RR) Districts. 2. Outdoor Recreation: All play areas or outdoor seating areas shall have a defined permitted. Areas adjacent to roadways or vehicular circulation shall be protected by a fence, vegetation, or combination thereof without obstructing sight triangles. 3. Accessory Uses: May be permitted to have a commercial kitchen that is compliant with all food safety, building, and fire codes. 4. Applicable to Rural Agricultural (RA) and Rural Residential (RR): a. Size: 10,000 sq. ft. maximum gross floor area b. Agricultural Component: At least 5% or 150 sq. ft., whichever is greater, shall be dedicated to the growing of agricultural produce such as wheat, barley, grapes, herbs, or other produce that is non-invasive. q. Miniature Golf Courses 1. Operation: Shall not operate between the hours of 12:01 a.m. and 6:00 a.m. of any day. 2. Lighting and Noise: Lighting shall comply with the requirements in Article 8. The use shall comply with the noise ordinance of the Town. Lighting within the course shall be shielded and contained to the course as to not spillover to adjacent properties or become a traffic hazard. The Administrator may require a photometric plan if deemed necessary 3. Buffer: Shall have a street buffer in accordance with Section 7.5. 4. Course Design: Structures, characters, vegetation or other decorative elements shall reflect historical or cultural elements of the Town, Region, or State. The course shall be designed with proper safety measures to include, but not limited to, perimeter fencing, barriers around water features, and appropriate interior signage. r. Office, Medical and Non-Medical 1. Applicable to Rural Agricultural (RA) and Rural Residential (RR): a. Size: 10,000 sq. ft. maximum gross floor area. s. Office Building 1. Minimum Lot Size: 1 acre 2. Accessory Uses: An office building may have accessory uses, such as a salon, convenience store, electrical vehicle charging stations, restaurants and other accessory uses that serve the needs of the building’s occupants. 3. Applicable to Rural Agricultural (RA) and Rural Residential (RR): a. Size: 10,000 sq. ft. maximum gross floor area t. Outdoor Display and Sales 1. Applicable to Rural Agricultural (RA) and Rural Residential (RR): 8/17/23 – MRB Group – Version_9 16 a. Location: Shall be setback at least 50 feet from the road, or placed behind an existing building. b. Design: Shall be placed on a site that is sufficiently improved to withstand the load of stored materials and vehicles. c. Site Plan: A site plan shall be required showing the areas of outdoor storage and sales to ensure pedestrian and vehicular circulation. d. Operation: Outdoor storage as a principal use is not permitted. u. Parking Lots 1. Design: Shall comply with all standards in Article 6. 2. Applicable to Town Center (TC) and Village Commercial (VC): Shall not be located adjacent to an existing property utilized as a parking lot as its principal use. 3. Applicable to Rural Agricultural (RA) and Rural Residential (RR): a. Size: Shall not exceed 20 spaces b. Storage: Shall be kept free of storage of inoperable vehicles when a parking lot is the principal use for the property. When parking lots are associated with another primary use, it may be permitted for vehicle storage, however it shall be fully enclosed and screened from view with vegetation, fencing, or combination thereof. c. Design: Shall be composed of either asphalt, concrete, or pervious materials that can withstand the load of its intended use. v. Personal Service 1. Applicable to Rural Agricultural (RA) and Rural Residential (RR): Permitted as an accessory use, and shall follow the regulations for Home Occupations in Section 4.5.3.n. w. Pet Boarding 1. Location: All cages or kennels for animals shall be located in the rear of the building. 2. Screening: All kennels shall be opaquely screened form the public right-of-way and adjacent properties. Areas reserved for the exercise and play of animals shall be defined by a 6 feet wall or fence. 3. Operation: Outdoor activity is permitted during daylight hours, animals must be boarded indoors at night. 4. Compliance with other codes and regulations: Applicant shall comply with all other Town, County, State, and Federal Regulations. (Code of Ordinances Town of Chapin, 3.102) 5. Applicable to Town Center (TC) and Village Commercial (VC): All animals shall be within the building. Outdoor kennels are not permitted. x. Restaurant, Full Service 1. Applicable to Rural Agricultural (RA) and Rural Residential (RR): a. Size: 10,000 sq. ft. maximum gross floor area b. Design: No flat or parapet roofs. Minimum roof pitch shall be 4:12. y. Specialty Retail 1. Applicable to Rural Agricultural (RA) and Rural Residential (RR): 8/17/23 – MRB Group – Version_9 17 a. Size: 10,000 sq. ft. maximum gross floor area b. Emergency Services: Shall demonstrate that the use is serviceable by emergency services to include ambulatory, fire, and police. c. Operation: May include the processing of wild game and animals to include deer, cows, pigs, chickens, fish, and fowl, however the area dedicated to processing shall not exceed 25% of the gross floor area of the use. This shall not be misconstrued as meat processing or food processing facility as defined by the State of South Carolina. Encouraged to sell recreational items that relate to the natural amenities of surrounding areas. z. Tattoo Parlor 1. Location: Shall not be located within 1,000 linear feet of a church or school, except when located within Town Center (TC) or Village Commercial (VC). aa. Tobacco Stores 1. Location: Shall not be closer than 1,000 linear feet from the nearest tobacco store. bb. Vape Store 1. Location: Shall not be located closer than 3,000 linear feet from the nearest vape store, school, or place for religious assembly. cc. Veterinarian 1. Animal Boarding: The keeping of any animals overnight shall be permitted if the animal is kept indoors. 2. Applicable to Town Center (TC) and Village Commercial (VC): Overnight animal boarding is not permitted unless completely inside a building. 3. Applicable to Rural Agricultural (RA) and Rural Residential (RR): Animal Boarding shall follow all Home Occupation standards in Section 4.3.2.n. 4.4.4. Institutional-Civic-Public Uses a. Amphitheaters, Outdoor 1. Operation: The use shall only operate between 8:00am and 10:00pm unless a noise ordinance waiver is granted by the Town of Chapin. 2. Lighting and Noise: The operation of this use shall adhere to the noise ordinance of the Town. All lighting shall be design to be sufficiently shielded and directed as to prevent spillover to adjacent properties. The Administrator may require a photometric plan if deemed necessary. b. Cemetery and Mausoleums 1. Lot Size: Minimum lot size of 1 acre. c. Civic and Social Organizations 1. Operation: Shall not disrupt the character of the district. 2. Applicable to Suburban Residential 3 (SR3), Town Residential 1 (TR1), Town Residential 2 (TR2), and Town Residential 3 (TR3) Districts: The applicant shall demonstrate the need for the proposed use to the Administrator and Zoning Review Board with a narrative. d. Colleges, Universities, Vocational Schools, and Private Schools 8/17/23 – MRB Group – Version_9 18 1. Site Plan: A master plan for the campus is required. The use is compatible with the district, and adequate provisions for the preservation and use of open space. 2. Need: Documentation from the local school board or other accredited educational institution or authority detailing the need for this use in its proposed location. e. Farmers Market, Indoor and Outdoor 1. Permit Required: All vendors within an authorized farmer’s market shall obtain all applicable licenses to operate within the State of South Carolina and Town of Chapin. 2. Operation: Shall operate between 6 a.m. and 10 p.m. and shall be on Saturday and Sunday unless otherwise approved by the Town. 3. Hours of Operation: Sales shall be conducted within the property or properties, and shall not obstruct any areas intended for the circulation of pedestrians or vehicles. f. Government Building or Facility 1. Size: Shall be limited to a 4,000 square foot building footprint within Suburban Residential 1 (SR1) zoning district. 2. Demonstration of Need: The applicant shall provide all necessary documentation demonstrating the need for the proposed facility as prepared by a person experienced in the same field. (Ex: Chief of Police or County Sheriff proposing new police substation) a. Exemptions: Police, Fire or Ambulatory stations are exempt from these standards. g. Hospitals 1. Applicable to Rural Agricultural (RA) and Rural Residential (RR): a. Size: 15,000 sq. ft. maximum gross floor area b. Licensing: Shall have all Federal and State licenses. c. Need: Shall provide documentation detailing demand or need of healthcare facilities. h. Religious Assembly 1. Minimum Lot Size: 20,000 sq. ft. 2. Setbacks: Principal building at least 25 feet from adjacent residentially zoned properties. 3. Accessory Uses: Day cares and Sunday schools are allowable accessory uses. 4. Applicable to Town Center (TC) and Village Commercial (VC): Distance requirements from bars, tobacco stores, tattoo parlors, and other similar uses do not apply. i. Theater 1. Operation: The use shall only operate between 8:00am and 10:00pm unless a noise ordinance waiver is granted by the Town. Indoor shows or events are exempted from this requirement. 2. Lighting and Noise: No speaker or lighting fixture shall negatively affect any adjacent residential property. The use shall comply with applicable lighting 8/17/23 – MRB Group – Version_9 19 standards and noise ordinance. Theater search lights as a decoration may be used as long as the applicant demonstrates compliance with applicable Federal, State, and Local laws. Additionally, search lights shall not be directed at ground level, any buildings or structures, or any vehicles. 4.4.5. Industrial Uses a. Heavy Equipment Rental 1. Parking of Vehicles: No vehicles or equipment shall be stored on an unimproved surface, required buffer, berm, or landscaping feature. No vehicle shall be elevated for the purposes of advertising, by any means, above the parking grade. Vehicles for repair shall be stored in the rear or side, screened from the public right of way, and adjacent property. No vehicle undergoing repair services, under any circumstance, should be on-site for more than 90 days. a. Exceptions: The Administrator may grant a waiver to these standards when the use is located within Rural Agricultural (RA) or Rural Residential (RR) districts. 2. Service Bay Doors: Repair of vehicles or boats shall occur within an enclosed building. Service bay doors shall not be visible from the public right-of-way. If service bay doors face a residential property, they shall be opaquely screened from view 3. Screening: All vehicles and equipment being stored overnight on-site shall be located in the rear or side and opaquely screened or located not to be visible from the public right-of-way. b. Repossession Services 1. Storage of Equipment and Vehicles: No storage of vehicles or equipment shall be in the front yard, or between the buildings and a public right-of-way. 2. Screening: All vehicles and equipment being stored overnight on-site shall be opaquely screened or located not to be visible from the public right-of-way. 3. Security: The applicant shall submit a site plan that includes the location and specification of video surveillance equipment, sufficient screening, and perimeter security. Additionally, the applicant shall be required to employ or have a contract with a license security professional 24 hours a day, seven day a week. c. Telecommunication Facility 1. Shall adhere to the standards in Section 4.7 d. Truck Sales and Service 1. Storage of Equipment and Vehicles: No storage of vehicles or equipment shall be in the front yard, or between the buildings and a public right-of-way. 2. Screening: All vehicles and equipment being stored overnight on-site shall be opaquely screened or located not to be visible from the public right-of-way. e. Warehouse 1. Loading Bays: All bays used for truck delivery or loading shall be on the rear of the building. In the case where this is not possible, loading areas may be oriented toward the side, however no loading area shall be visible from the public right-of-way. 8/17/23 – MRB Group – Version_9 20 2. Outdoor Storage: All supplies, non-operable vehicles, and equipment shall be stored in the rear of the building. No storage is permitted between the building and the public right-of-way. 4.5. Accessory Uses and Structures 4.5.1. Accessory Use Permissions Defined This Section authorizes the establishment of accessory uses and structures that are incidental and customarily subordinate to principal uses. The Town’s intent in adopting this section is to allow a broad range of accessory uses. Such uses shall be located on the same site as the principal use and shall comply with the standards set forth in this section in order to reduce potentially adverse impacts on surrounding lands. 4.5.2. Accessory Use Table (ACCESSORY USE TABLE ON NEXT PAGE) 8/17/23 – MRB Group – Version_9 21 SECTION 4.5.2 - ACCESSORY USE TABLE Type of Accessory Use RA RR SR1 SR2 SR3 TR1 TR2 TR3 VC TC PI CC IC OC LI PO Accessory Dwelling Unit P P P P P C C Automated Teller Machine (ATM) P P P P P P Beekeeping P P C C Boat house and/or dock C C C C C C Caretaker Dwelling SE SE SE P Carport P P P P P P P SE SE Chicken Coop* P P P P P SE SE SE SE Co-locating for antennae (on a structure) SE SE SE SE SE C C C P Deck or Patio P P P P P P P P P P P P P P Drive-Through Window SE C C C C Electrical Vehicle Charging Station SE P P P P P P Garage detached P P P P P P P P P P P P P P Garage, attached P P P P P P P P P P P P P P Gazebo P P P P P P P P P P P P P Greenhouse P P P P P P P SE SE P Home Occupation P P C C C C C C C C C Outdoor Display/Sales C C SE C C Outdoor Storage for Equipment or Materials SE P Parking Lots SE SE P P P Porch P P P P P P P P P P P P P P Private Stable P P SE Shed P P C C C C C C C SE P C C P P Solar Energy System P P P P P P C C C C C C C C C SE Swimming Pool P P P P P P P P SE SE P P 8/17/23 – MRB Group – Version_9 22 4.5.3. Accessory Use Standards a. Accessory Dwelling Unit 1. Location: Shall be located in the rear. May be constructed above an existing attached or detached garage, if compliant with all other regulations. 2. Size: Shall not be larger than 50% of the gross floor area of the principal use, or 1,500 square feet, whichever is smaller. Shall have a minimum size of 240 square feet. b. Automated Teller Machine (ATM) 1. Location: Shall be located within or on the exterior façade of the principal use. For pedestrian accessible machines, it is encouraged to place adjacent to existing sidewalk connection. 2. Accessory: Shall only be an accessory to a use. ATMs shall not be considered a principal use. 3. Design: The Administrator may request that the applicant demonstrate compliance with Crime Prevention Through Environmental Design (CPTED) best practices to ensure the health and safety of users. c. Beekeeping 1. Location: Shall be located in the rear yard, and shall not create a nuisance to adjacent uses. The owner shall live on premises where bees are kept. No colony shall be within 30 feet of adjacent buildings on adjacent lots. 2. Size: Shall be a maximum of five colonies, each with one queen, except within RA or RR Zoning Districts. 3. Design: A flyway barrier of at least 6 feet in height is required, composed of a fence, wall or opaque vegetations, unless the structures containing bee hives are 80’ from the nearest property line. The walls of the barrier shall be oriented towards adjacent uses and buildings. An on-site freshwater source shall be located within 15 feet of the structure. 4. Operation: Swarm management techniques shall be implemented. However, such swarm management techniques for potentially hostile hives, including elimination of the hive, shall be made by an authorized or accredited third party. The owner shall retain documentation pertaining to the elimination of a hive for inspection by the Town or applicable agency. d. Boat House and Dock 1. Permit Required: Shall receive all relevant permits and approvals from Federal, State, or Local agencies prior to construction. e. Caretaker Dwelling 1. Location: Shall be located on the same premises with the principal use for which it is required. 2. Number: No more than one residence on the property, and shall be occupied by owners or employees of the use for which it is required. 8/17/23 – MRB Group – Version_9 23 3. Design: Shall be constructed so that the exterior of the premises provides a style consistent with the principal structure. Manufactured homes shall not be used as a Caretaker’s Dwelling, unless a special exception is granted by the Board of Zoning Appeals. f. Carport 1. Location: Shall be located on the side or rear of the principal structure. No portion of the carport shall be placed in front of the principal structure. 2. Design: Shall be composed of materials that are found on the principal structure. The roof of the carport may be used for a Solar Energy System. If the carport is used for storage, other than an operable vehicle, it shall be fully enclosed and not visible from the public right-of- way. No prefabricated or pre-manufactured metal structures are permitted. a. Exceptions: Carports in the RR, RA, and SR1 district may be prefabricated or pre-manufactured. g. Chicken Coop 1. Permit Required: Requires a Zoning Permit from Administrator. The owner of the chicken coop shall live on premises. No commercial off- premise activity is permitted. 2. Maximum Allowed: No roosters shall be permitted, except in Rural Agricultural (RA) and Rural Residential (RR). A maximum of 4 female chickens, quail, peahens, or ducks, except within RA and RR. A minimum of two square feet per domesticated female chicken shall be provided for the chicken coop. Invasive species are not permitted 3. Coop Required: Must be confined in a coop which is fully enclosed with a solid floor and made of suitable, washable material. The coop shall be cleaned regularly with all droppings and excretions placed in a flyproof container. The chicken coop and fenced enclosure must provide adequate ventilation and adequate sun, shade and must be constricted in a manner to resist access by rodents, wild birds and predators including dogs and cats. Chicken coops shall be enclosed on all sides and shall have a roof and doors. Opening windows and vents must be covered with predator- and bird-resistant wire of less than one-inch openings. 4. No slaughtering of fowl is permitted on premises 5. All stored food for the domesticated female chickens must be kept either indoors or in a weather-resistant container designed to prevent access by animals. Uneaten food shall be removed daily. h. Deck or Patio 1. Location: Shall be located in the side or rear of the principal use. Patios or Decks associate with a commercial use may be incorporated within the front entrance, but only when approved by the Architectural Review Board. 8/17/23 – MRB Group – Version_9 24 2. Materials: Shall be composed of materials found on the principal use. i. Drive-through Window 1. Location: Shall be located on the side or rear of the principal use, and shall not face any public right-of-way. j. Electrical Vehicle Charging Station 1. Applicability: Charging stations for private dwellings are exempt from these standards. 2. Examples: EV Charging stations shall be an accessory for automobile service stations in combination with fuel pumps, commercial developments, parking lots, parking garages, and other uses determined by the Administrator. k. Garages 1. Attached a. Design: Shall not be composed of a prefabricated or pre- manufactured metal structure. Garages shall be composed of materials and design that complements the principal structure. b. Location: Shall be located on the side or rear of the principal structure c. Size: A maximum of two bays may face the public right-of-way, additional bays shall be perpendicular to the right-of-way. Garages shall not exceed the height of the principal structure. 2. Detached a. Design: Shall not be composed of a prefabricated or pre- manufactured metal structure. Garages shall be composed of materials and design that complements the principal structure. Detached garages within the RR and RA zoning district are exempt from this requirement b. Location: Shall be located in the rear or side of a principal structure. Shall be setback completely behind the principal structure. l. Gazebo 1. Location: Shall be located in the rear or side of a principal use. 2. Design: Shall not be used for parking of vehicles. If used for storage, other than patio furniture or similar items, any side visible from an adjacent property shall be enclosed or opaquely screened. m. Greenhouse 1. Location: Shall be located in the rear or side of the principal use, and shall be located completely behind the principal use. 2. Storage: May not be used for storage of items or materials unrelated to the care of plants and/or flowers. 3. Maintenance: Shall be kept in good condition and free from invasive species. n. Home Occupation 1. The following uses are not permitted as home occupations: a. Vehicle or Equipment Repair or Service 8/17/23 – MRB Group – Version_9 25 b. Restaurant or Bars c. Animal Boarding facilities d. Lodging, unless an approved short-term rental or bed and breakfast e. Medical offices f. Tattoo parlor or body piercing g. Any other use determined by the Administrator that would negatively affect the surrounding neighborhood, such as noxious noise, smells, sights, or similar negative affect to the senses. 2. Operation: The following shall be requirements for all Home Occupations: a. Shall be conducted inside dwelling by resident family members b. Utilizes not more than 25% of total dwelling floor area c. No change in exterior appearance of dwelling d. No outside display of products e. No sale of products conducted at the site of the home occupation f. Creates no health or safety hazard, noise, offensive emission, traffic hazard, unsightly conditions or nuisance g. No signage is permitted. h. No commercial vehicles, as outlined in Section 8.3.6, are permitted o. Outdoor Display or Sales 1. Location: Shall not obstruct any sidewalk, egress, ingress, nor areas where vehicles or pedestrian circulate. 2. Permit Required: Shall provide information regarding to time period, location, type of products, and other information deemed necessary by Administrator prior to a Zoning Permit being issued. p. Outdoor Storage for Equipment or Materials 1. Location: Storage for equipment and materials shall only be permitted in the Light Industrial (LI) district. Permitted uses conducting vehicle sales are exempt from this requirement. 2. Design: Equipment and materials shall be stored in the rear or a non- visible side of the property. Any equipment or materials that are being stored shall not be visible from the public right-of-way. q. Parking Lots 1. Location: Shall not be located between the principal façade and principal street frontage within the Village Commercial and Town Center districts. r. Porch 1. Location: Shall be located on the front, side, or rear elevation of a principal use. 2. Design: Shall be composed of materials found on the principal use. Porches shall be encouraged to have equally spaced columns and openings. Additionally, porches are encouraged to center door and window openings within the column openings. 8/17/23 – MRB Group – Version_9 26 3. Size: The minimum width of a front porch shall not be less than 25% of the width of the front façade of the principal structure. Side and rear porch widths shall be 25% of which the porch is constructed on. Side and rear porches are exempt from this requirement if they are not visible from the public right-of-way. s. Private Stable 1. Location: Only permitted in the RR or RA zoning District. Can be located in front of principal building, if compliance with all other setbacks 2. Setback: Shall be setback at least 200 feet away from adjacent buildings on adjacent properties. 3. Operation: Shall only be used for the housing of horses owned by the person residing on the property. t. Shed 1. Location: Shall be located in the rear or non-visible side of the property. 2. Design: Shall not be a premanufactured or prefabricated metal building. Shall be composed of materials that are present on the principal use. a. Exceptions: Sheds within the RR and RA zoning district are exempt from this requirement. u. Solar Energy System 1. Location: Shall only be installed on a roof or canopy. Shall be installed on roof slopes not visible from public right of way. v. Swimming Pool 1. Location: Shall be located within the rear or side yard. Shall be completely screened with a fence or wall from the public right-of-way and adjacent properties. 4.6. Sexually-Oriented Businesses 4.6.3. Purpose and Intent It is the purpose of this section to regulate sexually-oriented businesses to promote the health, safety, morals, and general welfare of the citizens of the Town of Chapin, and to establish reasonable and uniform regulations to prevent the continued deleterious location and concentration of sexually-oriented businesses within the town. The provisions of this section have neither the purpose nor effect of imposing a limitation or restriction on the content of any communicative materials including sexually-oriented materials. Similarly, it is not the intent or effect of this Ordinance to restrict or deny access by adults to sexually oriented materials protected by the First Amendment, or to deny access by the distributors and exhibitors of sexually-oriented entertainment to their intended market. Neither is it the intent nor effect of this section to condone or legitimize the distribution of obscene material. 4.6.1. Definitions a. Adult arcade means any place to which the public is permitted or invited wherein coin-operated or slug-operated or electronically, electrically, or mechanically 8/17/23 – MRB Group – Version_9 27 controlled still or motion picture machines, projectors, or other image-producing devices are maintained to show images to five (5) or fewer persons per machine at any one time, and where the images so displayed are distinguished or characterized by the depicting or describing of “certain sexual activities” or “specified anatomical areas”. b. Adult bookstore or adult video store means a commercial establishment which, as one of its principal business purposes, offers for sale or rental for any form of consideration any one or more of the following: 1. Books, magazines, periodicals or other printed matter, or photographs, films, motion pictures, video cassettes, or video reproductions, slides, or other visual representations which depict or describe “specified sexual activities” or “specified anatomical areas”; or 2. Instruments, devices, or paraphernalia which are designed for use in connection with “specified sexual activities.” A commercial establishment may have other principal business purposes that do not involve the offering for sale or rental of material depicting or describing “specified sexual activities” or “specified anatomical areas” and still be categorized as adult bookstore or adult video store. Such other business purposes will not serve to exempt such commercial establishment from being categorized as an adult bookstore or adult video store so long as one of its principal business purposes is the offering for sale or rental for consideration the specified materials which depict or describe “specified sexual activities” or “specified anatomical areas”. c. Adult cabaret means a nightclub, bar, restaurant or similar commercial establishment which regularly features: 1. Persons who appear in a state of nudity; or 2. Live performances which are characterized by the exposure of “specified anatomical areas” or by “specified sexual activities”; or 3. Films, motion pictures, video cassettes, slides, or other photographic reproductions which are characterized by the depiction or description of “specified sexual activities” or “specified anatomical areas”. d. Adult motel means a hotel, motel or similar commercial establishment: 1. Offers accommodations to the public for any form of consideration; provides patrons with closed-circuit television transmissions, films, motion pictures, video cassettes, slides, or other photographic reproductions which are characterized by the depiction or description of “specified sexual activities” or “specified anatomical areas”; and has a sign visible from the public right-of-way which advertises the availability of this adult type or photographic reproductions; or 2. Offers a sleeping room for rent for a period of time that is less than ten (10) hours; or 3. Allows a tenant or occupant of a sleeping room to subrent the room for a period of time that is less than ten (10) hours. e. Adult motion picture theater means a commercial establishment where, for any form of consideration, films, motion pictures, video cassettes, slides, or similar 8/17/23 – MRB Group – Version_9 28 photographic reproductions are regularly shown which are characterized by the depiction or description of “specified sexual activities” or “specified anatomical areas”. f. Adult theater means a theater concert hall, auditorium, or similar commercial establishment which regularly features persons who appear in a state of nudity or live performances which are characterized by the exposure of “specified anatomical areas” or by “specified sexual activities”. g. Escort means a person who, for consideration, agrees or offers to act as a companion, guide, or date for another person, or who agrees or offers to privately model lingerie or to privately perform a striptease for another person. h. Escort Agency means a person or business association who furnishes, offers to furnish, or advertises to furnish escorts as one of its principal business purposes for a fee, tip, or other consideration. i. Establishment means and includes any of the following: 1. The opening or commencement of any sexually-oriented business as a new business; 2. The conversion of an existing business, whether or not a sexually-oriented business, to any sexually-oriented business; 3. The additions of any sexually-oriented business to any other existing sexually- oriented business; or 4. The relocation of any sexually-oriented business. j. Permittee and/or licensee means a person in whose name a permit to operate a sexually-oriented business has been issued, as well as the individual listed as an applicant on the application for a permit. k. Nude Model Studio means any place where a person who appears in a state of nudity or displays “specified anatomical area” is provided to be observed, sketched, drawn, painted, sculptured, photographed, or similarly depicted by other persons who pay money or any form of consideration. l. Nudity or a state of nudity means the appearance of a person’s genitals, pubic area, vulva, anus, anal cleft or cleavage or buttocks or any simulation thereof; or any portion of a female breast below the horizontal line across the top of the areola at its highest point or any simulation thereof. The definition shall include the appearance of any portion of the entire lower portion of the female breast. m. Person means an individual, proprietorship, partnership, corporation, association, or other legal entity. n. Semi-nude means a state of dress in which clothing covers no more than the genitals, pubic region, and areola of the female breast, as well as portions of the body covered by supporting straps or devices. o. Sexual encounter center means a business or commercial enterprise that, as one of its principal business purposes, offers for any form of consideration: 1. Physical contact in the form of wrestling or tumbling between persons of the opposite sex; or 2. Activities between male and female persons and/or persons of the same sex when one or more of the persons is in a state of nudity or semi-nude. 8/17/23 – MRB Group – Version_9 29 p. Sexually-oriented business means an adult arcade, adult bookstore or adult video store, adult cabaret, adult motel, adult motion picture theater, adult theater, escort agency, nude model studio, or sexual encounter center. q. Specified anatomical areas means the male genitals in a state of sexual arousal and/or the vulva or more intimate parts of the female genitals. r. Specified sexual activities means and includes any of the following: 1. The fondling or other erotic touching of human genitals, pubic region, buttocks, anus or female breasts; 2. Sex acts, normal or perverted, actual or simulated, including intercourse, oral copulation, or sodomy; 3. Masturbation, actual or simulated; 4. The fondling, erotic touching, or other such contact with an animal by a human being; or 5. Excretory functions as part of or in connection with any of the activities set forth in 1 through 4 above. s. Substantial enlargement of a sexually-oriented business means the increase in floor areas occupied by the business by more than twenty-five (25) percent, as the floor areas exist. t. Transfer of ownership or control of a sexually-oriented business means and includes any of the following: 1. The sale, lease, or sublease of the business; 2. The transfer or securities which constitute a controlling interest in the business, whether by sale, exchange, or similar means; or 3. The establishment of a trust, gift, or other similar legal device which transfers the ownership or control of the business. 4.6.2. Classification a. Sexually-oriented businesses are classified as follows: 1. Adult arcades; 2. Adult bookstores or adult video stores; 3. Adult cabarets; 4. Adult motels; 5. Adult motion picture theaters; 6. Adult theaters; 7. Escort agencies; 8. Nude model studios; and 9. Sexual encounter centers. 4.6.4. Permit Required a. Operation of a sexually-oriented business requires a valid permit from the Town of Chapin for the particular classification of business. b. An application for a permit must be made on a form provided by the Town of Chapin zoning department. The application must be accompanied by a sketch or diagram showing the configuration of the premises, including a statement of the 8/17/23 – MRB Group – Version_9 30 total floor space occupied by the business. The sketch or diagram need not be professionally prepared but must be drawn to a designated scale or drawn with marked dimensions of the interior of the premises to an accuracy of plus or minus six (6) inches. c. The applicant must be qualified according to the provisions of this chapter and the premises must be inspected and found to be in compliance with the law by the health department, fire department, and building official. The health department, fire department and building office shall complete their inspections and certify same to the Administrator within twenty-one (21) days of receipt of the application by said Administrator. d. If a person who wishes to operate a sexually-oriented business is an individual, he must sign the application for a permit as applicant. If a person who wishes to operate a sexually-oriented business is other than an individual, each individual who has a ten (10) percent or greater interest in the business must sign the application for a permit as applicant. If a corporation is listed as owner of a sexually-oriented business or as the entity which wishes to operate such a business, each individual having a (10) percent or greater interest in the corporation must sign the application for a permit as applicant. e. The fact that a person possesses other types of state, or Town of Chapin permits and/or licenses does not exempt that person from the requirement of obtaining a sexually-oriented business permit. 4.6.5. Issuance of Permit and Fee a. The Town Administrator shall approve the issuance of a permit to an applicant within thirty (30) days after receipt of an application unless any one or more of the following is found to be true: 1. An applicant is under eighteen (18) years of age; 2. An applicant is overdue payment to the Town of Chapin for taxes, fees, fines, or penalties assessed or imposed in relation to a sexually-oriented business; 3. An applicant has failed to provide information reasonably necessary for issuance of the permit or has falsely answered a question or request for information on the application; 4. An applicant is residing with a person who has been denied a permit by the Town of Chapin to operate a sexually-oriented business within the preceding twelve (12) months, or residing with a person whose license to operate a sexually-oriented business has been revoked within the preceding twelve (12) months; b. The premises to be used for the sexually-oriented business have not been approved by the health department, fire department, and the building official as being in compliance with applicable laws and ordinances; c. The permit fee required by this Ordinance has not been paid; d. An applicant of the proposed establishment is in violation of or is not in compliance with any of the provisions of this Ordinance; or 8/17/23 – MRB Group – Version_9 31 e. The permit, if granted, shall state on its face the name of the person or persons to whom it is granted, the expiration date, and the address of the sexually oriented business. The permit shall be posted in a conspicuous place at or near the entrance to the sexually-oriented business so that it may be easily read at any time. f. The annual fee for a sexually-oriented business permit is five hundred dollars ($500) dollars. 4.6.6. Inspection a. An application of permittee shall permit representatives of the law enforcement department, health department, fire department, zoning department or any other Town of Chapin departments or agencies to inspect the premises of a sexually- oriented business for the purpose of ensuring compliance with the law, at any time it is occupied or open for business. b. A person who operates a sexually-oriented business or his agent or employee commits a misdemeanor if he refuses to permit such lawful inspection of the premises at any time it is occupied or open for business. 4.6.7. Expiration of Permit a. Each permit shall expire one year from the date of issuance and may be renewed only by making application as provided in Section 4.6.4. Application for renewal should be made at least thirty (30) days before the expiration date, and when made less than (30) days before the expiration date, the expiration of the permit will not be affected. b. When the Administrator denies renewal of a permit, the applicant shall not be issued a permit for one (1) year from the date of denial. If subsequent to denial, the Administrator finds that the basis for denial of the renewal permit has been corrected or abated, the applicant may be granted a permit if at least ninety (90) days have elapsed since the date of denial became final. 4.6.8. Suspension of Permit a. The Administrator may suspend a permit for a period not to exceed thirty (30) days if it is determined that a permittee and/or licensee or an employee of a permittee and/or licensee has: 1. Violated, or is not in compliance with any section of this Ordinance; or 2. Engaged in excessive use of alcoholic beverages while on the sexually- oriented business premises; or 3. Refused to allow an inspection of the sexually-oriented business premises as authorized by this chapter; or 4. Knowingly permitted gambling by any person on the sexually-oriented business premises. 4.6.9. Revocation of Permit a. The Administrator shall revoke a permit if it is determined that: 8/17/23 – MRB Group – Version_9 32 1. A permittee and/or his licensee knowingly gave false or misleading information in the material submitted to the zoning department during the application process; or 2. A permittee and/or licensee or an employee has knowingly allowed possession, use, or sale of controlled substances on the premises; or 3. A permittee and/or licensee or an employee has knowingly allowed prostitution on the premise; or 4. A permittee and/or licensee or an employee knowingly operated the sexually- oriented business during a period of time when the permittee’s and/or licensee’s permit was suspended; or 5. A permittee and/or licensee or an employee has knowingly allowed any act of sexual intercourse, sodomy, oral copulation, masturbation or other sexual conduct to occur in or on the permitted and/or license premises; or 6. A permittee and/or licensee is delinquent in payments to the Town of Chapin or state for any taxes of fees past due. b. When the Administrator revokes a permit, the revocation shall continue for one (1) year, and the permittee and/or licensee shall not be issued a sexually-oriented permit for one (1) year from the date revocation became effective. If, subsequent to revocation, the Administrator finds that the basis for the revocation has been corrected or abated, the applicant may be granted a permit if at least ninety (90) days have elapsed since the date the revocation became effective. 4.6.10. Transfer of Permit a. A permittee and/or licensee shall not transfer his permit to another, nor shall a permittee and/or licensee operate a sexually-oriented business under the authority of a permit at any place other than the address designated in the application. 4.6.11. Location of Sexually-Oriented Businesses a. A sexually-oriented business may be permitted by Special Exception within the Corridor Commercial (CC) and Interstate Commercial (IC) zoning districts. b. A sexually-oriented business shall not be operated within one thousand (1,000) feet of: 1. A church; 2. A public or private elementary or secondary school; 3. A boundary of any residential district; 4. A public park adjacent of any residential use; 5. A day care center; or 6. The property line of a lot devoted to residential use. c. A sexually-oriented business shall not be operated within one thousand (1,000) feet of another sexually- oriented business. d. There shall be no more than one (1) sexually-oriented business in the same building, structure, of portion thereof, or the increase of floor areas of any sexually-oriented business in any building, structure, or portion thereof containing another sexually business. 8/17/23 – MRB Group – Version_9 33 e. For the purpose of this Ordinance, measurement shall be made in a straight line, without regard of intervening structures or objects, from the nearest portion of the building or structure used as a part of the premises where a sexually oriented business is conducted, to the nearest property line of the premises of a church, day care center, or public or private elementary or secondary school, or to the nearest boundary of an affected public park, residential district, or residential lot. f. For purposes of Section 4.6.11.b of this section, the distance between any two (2) sexually-oriented businesses shall be measured in a straight line, without regard to intervening structures or objects, from the closest exterior wall of the structure in which each business is located. g. A sexually-oriented business lawfully operating as a conforming use is not rendered a nonconforming use by the location, subsequent to the grant or renewal of the sexually-oriented business permit, of a church, public or private elementary or secondary school, public park, day care center residential district, or a residential lot with one thousand (1,000) feet of the sexually-oriented business. This provision applies only to the renewal of a valid permit, and does not apply when an application for a permit is submitted after a permit has expired or has been revoked. 4.6.12. Additional Regulations for Adult Motels a. Evidence that a sleeping room in a hotel, motel, or a similar commercial establishment has been rented and vacated two (2) or more times in a period of time that is less than ten (10) hours creates a rebuttable presumption that the establishment is an adult motel as that term is defined in this chapter. b. A person commits a misdemeanor if, as the person in control of a sleeping room in a hotel, motel, or similar commercial establishment that does not have a sexually- oriented permit, he rents or subrents a sleeping room to a person and, within ten (10) hours from the time the room is rented, he rents or subrents the same sleeping room again. c. For purposes of this section, the terms “rent” or “subrent” mean the act of permitting a room to be occupied for any form of consideration. 4.6.13. Regulations for Exhibition of Sexually Explicit Films or Videos a. A person who operates or causes to be operated, a sexually-oriented business, other than an adult motel, which exhibits on the premises in a viewing room of less than one hundred fifty (150) square feet of floor space, a film, video cassette, or other video reproduction which depicts “specified sexual activities” or specified anatomical areas, shall comply with the following requirements: 1. Upon application for a sexually-oriented permit, the application shall be accompanied by a diagram of the premises showing a plan thereof specifying the location of one or more manager’s stations and the location of all overhead lighting fixtures and designating any portion of the premises in which patrons will not be permitted. A manager’s station may not exceed thirty two (32) square feet of floor area. The diagram shall also designate the place at which the permit will be conspicuously posted, if granted. A professionally prepared diagram in the nature of an engineer’s or architect’s blueprint shall not be 8/17/23 – MRB Group – Version_9 34 required; however, each diagram should be oriented to the north or to some designated street or object and should be drawn to a designated scale or with marked dimensions sufficient to show the various internal dimensions of all areas of the interior of the premises to an accuracy of plus or minus six (6) inches. The Town of Chapin Administrator may waive the foregoing diagram for renewal applications if the applicant adopts a diagram that was previously submitted and certifies that the configuration of the premises has not been altered since it was prepared; 2. The application shall be sworn to be true and correct by the applicant; 3. No alteration in the configuration or location of a manager’s station may be made without the prior approval of the Administrator or his designee; 4. It is the duty of the owners and operator of the premises to ensure that at least one (1) employee is on duty and situated in each manager’s station at all times that any patron is present inside the premises; 5. The interior of the premises shall be configured in such a manner that there is an unobstructed view from a manager’s station of every area of the premises to which any patron is permitted access for any purpose excluding restrooms. Restrooms may not contain video reproduction equipment. If the premises has two (2) or more manager’s stations designated, then the interior of the premises shall be configured in such a manner that there is an unobstructed view of each area of the premises to which any patron is permitted access for any purpose from at least one (1) of the manager’s stations. The view required in this subsection must be by direct line of sight from the manager’s station; 6. It shall be the duty of the owners and operator, and it shall also be the duty of any agents and employees present in the premises, to ensure that the view area specified in subsection (5) remains unobstructed by any doors, walls, merchandise, display racks or other materials at all times and to ensure that no patron is permitted access to any area of the premises which has been designated as an area in which patrons will to be permitted in application filed pursuant to subsection (1) of this section; 7. No viewing room may be occupied by more than one (1) person at any time; 8. The premises shall be equipped with overhead lighting fixtures of sufficient intensity to illuminate every place to which patrons are permitted access at an illumination of not less than one (1) foot candle as measured at the floor level; and 9. It shall be the duty of the owners and operator and it shall also be the duty of any agents and employees present in the premises to ensure that the illumination described above is maintained at all times that any patron is present in the premises. 10. A person having a duty under the above regulations commits a misdemeanor if they knowingly fail to fulfill that duty. 4.6.14. Exemptions 8/17/23 – MRB Group – Version_9 35 a. It is a defense to prosecution that a person appearing in a state of nudity did so in a modeling class operated: 1. By a proprietary school, licensed by the state of South Carolina; a college, junior college, or university supported entirely or partly by taxation; 2. By a private college or university which maintains and operates education programs in which credits are transferable to a college, junior college, or university supported entirely or partly by taxation; or b. In a structure: 1. Which has no sign visible from the exterior of the structure and no other advertising that indicates a nude person is available for viewing; and 2. Where, in order to participate in a class a student must enroll at least three (3) days in advance of the class; and 3. Where no more than one (1) nude model is on the premises at any one (1) time. 4.7. Telecommunication Tower 4.7.1. Purpose The regulations of this section are designed to site communications towers in the Town of Chapin. The regulations in this section are not meant to conflict with any regulations from a Federal or State agency. It is the intent of this article to allow for the co- existence of communications towers and other land uses balanced with reducing the overall negative impact of communications towers by: • Reducing the number of towers by encouraging collocation; and • Encouraging the following the mitigation actions: o The clustering of towers; o The provision of effective screening; and o The location of communications equipment on existing structures. 4.7.2. Dimensional Requirements Districts Maximum Height Setback (from adjacent properties) Rural Agricultural (RA) 400 feet 250 feet Rural Residential (RR) 300 feet 250 feet Public Institutional (PI) 400 feet 100 feet Corridor Commercial (CC) 150 feet 100 feet Interstate Commercial (IC) 150 feet 100 feet Light Industrial (LI) 200 feet 50 feet 4.7.3. Exemptions The following proposed uses shall require only a zoning permit: 4.7.3.1. Colocation. Proposed communications equipment collocating on existing towers and structures without adding to their height. 4.7.3.2. Roof-Mounted Telecommunication Equipment. Antennas mounted on buildings, water tanks or structures other than a free-standing or guyed communications 8/17/23 – MRB Group – Version_9 36 tower and which do not extend more than 30 feet above the highest part of the structure. Minor Modifications to Existing Facilities. Modifications to conforming telecommunications facilities that meet the requirements contained herein such as the addition of accessory equipment. 4.7.4. Tower abandonment and removal. A tower that is not used for communication purposes for more than 120 days (with no new application on file for any communication user) is presumed to be out of service and the owner of such tower must notify Town staff and remove the tower within 50 days. Where an owner does not remove an abandoned tower, the Town will utilize the bond provided as part of Section 4.7.5.l. 4.7.5. Submittal requirements All applications for telecommunications towers shall follow the applicable process as provided in this section. In addition to those requirements, every application must contain the following items: a. A site plan showing the location of the tower guy anchors (if any), existing or proposed buildings and structures or improvements, including parking, driveways or access roads, signage, fences and protected trees affected by the proposed construction. Adjacent land uses shall also be noted on the site plan, with precise measurements noted between the proposed tower and any structures on surrounding properties. b. The site plan must show a vegetated buffer, either existing or proposed, that provides an effective screen from public rights-of-way, adjacent property owners, parks, historic properties, and across view corridors. c. The height and design of the tower, materials to be used, color, and lighting shall be shown on elevation drawings. The applicant shall submit documentation justifying the total height of any communications towers, facility and/or antenna. d. Setback to the proposed tower including the fall zone. The fall zone shall be determined by an engineer certified by the State of South Carolina in a letter which includes the engineer's signature and seal. e. A report from a structural engineer registered in South Carolina showing the tower antenna capacity by type and number, and a certification that the tower is designed to withstand winds in accordance with ANSI/EIAMA 222 (latest version) standards. f. Evidence that a valid FCC license for the proposed activity has been issued. g. The distance between the proposed tower and all other telecommunication facilities serving any property within the Town of Chapin. h. A copy of the tower's search ring. i. To ensure the removal of towers which do not meet requirements for continued use or proper maintenance, a statement of financial responsibility shall be submitted for each tower and a performance bond for the amount of anticipated removal costs shall be posted. The bond must be renewed as necessary to ensure that it is maintained at all times during the existence of the tower. 8/17/23 – MRB Group – Version_9 37 j. The applicant shall furnish a visual impact assessment which shall include: 1. A zone visibility map which shall be provided to determine locations where the tower may be seen from. 2. Pictorial representations of before and after view from key viewpoints both inside and outside the Town including, but not limited to, Major Highways and Road; State and Local Parks; Historic Districts’ Preserves and historic sites normally open to the public; and any other location where the site is visible to a large number of visitors, travelers, or residents. 3. An assessment of the visual impact of the tower base, guy wires and accessory buildings from abutting and adjacent properties and streets. k. Additional information required by the Administrator for determination that all applicable zoning regulations are met. l. The applicant and the owner of record of any proposed wireless telecommunications facility shall, at its cost and expense, be required to execute and file with the Town a bond or other form of security acceptable to the Town as to type of security and the form and manner of execution, in an amount of at least seventy-five thousand dollars ($75,000.00) for a wireless telecommunications facility and twenty-five thousand dollars ($25,000.00) for a co-location on an existing wireless telecommunications facility or other structure and with such sureties as are deemed sufficient by the Town to assure the faithful performance of this Section. 4.7.6. Conditions Where a project may be conditionally approved, the applicant must show that all conditions below are met: a. The proposed communications tower, antenna or accessory structure will be placed in a reasonably available location which will minimize the visual impact on the surrounding area and allow the facility to function in accordance with minimum standards imposed by applicable communications regulations and applicant’s technical design requirements. b. The location and height of the proposed tower will not substantially impact the character of property listed in or eligible for the National Register of Historic Places, other significant environmental, cultural, or historical site, officially designated scenic roads or rivers, and that the tower is designed to blend into the environment and minimize visual impact. c. The applicant has made every effort to build the proposed tower in such a manner as may allow other telecommunication users to collocate including designing the tower for at least two (2) additional colocations. d. The proposed tower is located such that adequate setbacks are provided on all sides to prevent the tower's fall zone from encroaching onto adjoining properties. e. Applicant must show that all applicable health, nuisance, noise, fire, building and safety code requirements are met. 8/17/23 – MRB Group – Version_9 38 f. The tower must be located no closer to a structure on a separate lot than a distance equal to 1 foot for each foot in height of the proposed tower plus 50 feet as measured from the center of the proposed tower. g. The proposed tower is illuminated as required by the Federal Communications Commission or Federal Aviation Administration. h. Towers shall contain a sign no larger than four square feet to provide adequate notification to persons in the immediate area of the presence of an antenna that has transmission capabilities. The sign shall contain the names of the owners and operators of the antennas, as well as emergency phone numbers. The sign shall be located to be visible from the access point of the site. No other signage, including advertising, shall be permitted on any facilities, antennas, antenna supporting structures or antenna towers, unless required by law. i. Proposed towers may not be located within 1,000 feet of an existing tower unless the applicant certifies and submits satisfactory written evidence such as correspondence, agreements, contracts, etc., that the existing tower does not meet the applicant's structural specifications and the applicant's technical design requirements, or that a collocation agreement could not be obtained at a reasonable market rate. In the event of the situation set forth in this subsection, the clustering of new towers on the same parcel near existing towers is permitted. j. The applicant has pursued any available publicly owned sites and privately owned sites occupied by a compatible use, and if not utilized, that these sites are unsuitable for operation of the facility under applicable communications regulations and the applicant's technical design requirements. k. Applicant must show by certificate from a registered engineer that the proposed facility will contain only equipment meeting FCC rules and must file with the Administrator a written indemnification of the municipality and proof of liability insurance or financial ability to respond to claims up to $1,000,000.00 in the aggregate which may arise from operation of the facility during its life, at no cost to the municipality, in form approved by the municipality attorney. l. Land development regulations, visibility, fencing, screening, landscaping, parking, access, lot size, exterior illumination, sign, storage, and all other general zoning district regulations except setback and height, shall apply to the use. Setback and height conditions in this section apply. 4.7.7. Special Exception A tower, pole, or antenna may be permitted by special exception granted by the Board of Zoning Appeals after public hearing and find that the special exception meets all the criteria for special exception approval per Section 10.11. 4.8. Temporary Uses 4.8.1. Permits Required Unless otherwise provided, all permitted temporary uses listed below shall require a temporary use permit that shall be reviewed and issued by the administrator, subject to the procedures outlined in Section 10.4, Zoning Permit. If a use is not on the list below, it is prohibited. 8/17/23 – MRB Group – Version_9 39 4.8.2. Standards for Temporary Uses a. Permanent changes to the site are prohibited, including tree removal. b. All other required permits must be obtained by the operator. c. The applicant must provide a letter of consent from the owner of record of the property on which the temporary uses are to operate. d. The applicant may be required to provide a site plan drawn to scale or showing measurements, which show the property boundaries, the location and dimensions of the proposed temporary use area, existing buildings, existing parking areas and existing driveways and roads. If there will be any temporary structures, such as a tent or stand, they also need to be shown on the site plan. e. Setbacks: Setbacks for structures (tents, stands, etc.), items for sale, or parking areas shall be 25 feet from any adjacent property line or street right-of-way. f. Bond: For all structures associated with a temporary use, a performance bond, surety bond, cash deposit, or letter of credit shall be posted in the amount of 125% of the cost of the structure, trailer, or building, or amount agreed upon by the Administrator and applicant. In the event that the temporary use is not removed within the time specified on the zoning permit, this bond shall be called and the Town shall remove the temporary structure. 4.8.3. Permitted Temporary Use a. Open lot sale of seasonal produce and plant products including Christmas trees, pumpkin patches, or similar agricultural activity for a period not to exceed 45 consecutive calendar days. Applicant’s shall obtain all appropriate Permits as well as all applicable licenses from the Town, County, or State. b. Temporary real estate sales offices (e.g., construction trailer, model home), in conjunction with an approved subdivision or development project, in any district, for a period not to exceed 1 year unless renewed, provided no cooking or sleeping accommodations are maintained in the structure. These may be renewed, upon written request, for periods of 6 months at a time if the subdivision has an active Project Permit. Only one (1) temporary real estate office shall be allowed per 50 residential units within the development. c. For new construction, a contractor’s office and equipment sheds, including steel cargo storage containers, in any district districts, for a period of 1 year, provided a Project Permit has been issued for construction on the site, and such facilities are placed on the property to which it is appurtenant d. Temporary classroom facilities shall not be located at any school, religious institution, or other similar use, unless a plan for improvements designed to eliminate the temporary classrooms at a time certain in the future has been approved by the Administrator or appropriate zoning process. Such process shall include a review of a site plan for the temporary classrooms, and may require screening, buffering, or other standards for compliance. Extensions of up to 1-year may be permitted by the administrator, upon written request, if the units have not proven to be a nuisance and the plan for elimination is still active. e. Portable steel storage containers are permitted in any district for purposes of loading or unloading, for a period not to exceed 30 consecutive calendar days when 8/17/23 – MRB Group – Version_9 40 located on private property, and 14 consecutive calendar days when within a right- of-way. It shall not block access to an existing entryway and points of ingress or egress. Where a container is placed within the right-of-way, prior authorization from the regulating authority shall be obtained. f. Fairgrounds shall obtain all required licenses, inspections, certifications from applicable local, state, and federal agencies. In addition, fairground shall be subject to the following: 1. Site Plan: The applicant shall have a site plan showing the location of all amenities, aid stations, restrooms, infrastructure, parking areas, pedestrian pathways, vehicular circulations patterns, signage, lighting, and other similar features deemed necessary by the Administrator. 2. Liability Insurance: The applicant shall have all applicable and required means of insurance deemed necessary by the Town’s legal representative. 3. Emergency Services: The applicant must provide to the applicable Police and Fire authority that all measures of health and safety are being met or exceeded. 4. Access to Utilities: The applicant must demonstrate adequate access to all utilities. 5. Coordination: The applicant shall obtain a Special Events Permit from the Town and ensure the coordination of other applicable approvals relating to this event. 8/18/23 MRB Draft. Version 5 1 Article 5 Land Development Standards 5. Land Development Standards 5.1. Purpose The public health, safety, economy, good order, appearance, convenience, morals, and general welfare require the harmonious, orderly and progressive development of land within the Town of Chapin. In furtherance of this general intent, the regulation of land development by the Town of Chapin is adopted for the following purposes, among others: • To encourage the development of an economically sound and stable community; • To assure the timely provision of required streets, utilities, other facilities and services to new land developments; • To assure the adequate provision of safe and convenient traffic access and circulation, both vehicular and pedestrian, in and through new land developments; • To assure the provision of needed public open spaces and building sites in new land developments through the dedication or reservation of land for recreational, educational, transportation and other public purposes; and • To assure, in general, the wise and timely development of new areas or redevelopment of areas in harmony with the adopted Town of Chapin Comprehensive Plan. 5.2. Applicability 5.2.1. The following development shall comply with the improvement requirements in this article: a. The developer, owner, or applicant shall be responsible for the improvements required with all new, significantly improved, or expansion of development that require Minor (Section 10.8) or Major Subdivision Review (Section 10.9). b. New development and significantly improved as required for Major Architectural Review (Section 10.6) 5.2.2. The applicant shall be responsible for the installation and construction of required improvements according to the provisions of this ordinance, except as may otherwise be specifically provided herein or by Town policy or agreement. 5.2.3. Approval of a final plat shall be subject to the applicant having installed the improvements designated in this article, or having Improvements Guarantee to the satisfaction of the Town and Lexington County for installation of said improvement(s). 5.3. General Requirements 5.3.1. Street Improvements: Land designated for public or private streets shall be cleared and filled in accordance with the latest edition of the “South Carolina Standard Specifications for Highway Construction”, South Carolina State Highway Department, or as determined appropriate by the Lexington County Engineer or Administrator. 8/18/23 MRB Draft. Version 5 2 5.3.2. Water and Sewer Facilities: Water and sewer facilities shall be provided in accordance with the standard procedures and policies of the Town , the Department of Health and Environmental Control (DHEC) and by the water and sewer provider, if different from above. 5.3.3. Utility Lines: All utility lines within a development site shall be installed underground, unless there are existing above-ground lines that serve the property. When it is found to be necessary and desirable to locate public utility lines in a location other than street right-of-way, easements shall be shown on the plat for such purposes. When the water main is located in the street right-of-way and it will be necessary to cut into the street surface to serve abutting lots, a connection shall be stubbed out to the property line to serve each lot before the street is surfaced. Such easements shall be not less than twenty (20) feet along rear property lines and fifteen (15) feet alongside property line, subject to the approval of the jurisdiction having authority, and, where possible, shall be centered on rear and side lot lines. 5.3.4. Natural Gas: When gas lines are located in a street right-of-way, where possible, such lines shall be located outside the portion of the street to be surfaced to prevent cutting into the paved surface to serve abutting properties. 5.3.5. Improvement of Existing Substandard Conditions: Where the existing right of way is substandard, the developer shall be required to dedicate the appropriate amount of right-of-way (as measured from the centerline of the existing street) as well as install all noted sidewalk zone improvements including expanded sidewalks and street trees, lighting, storm drain improvements and street furniture as a part of the development process. Requests for waivers based on practical hardships shall be made to the Planning Commission. Appeals to this decision shall follow the process outlined in Section 10.7.4. 5.3.6. Flood Hazard Areas: In accordance with the Town’s Flood Prevention Ordinance, any development that contains land subject to flooding shall be accompanied by evidence that no appreciable expansion of the area subject to flooding would result from the proposed development of the land being subdivided, and that the proposed development will be adequately protected from inundation without appreciable interference with the flow of any watercourse or into an impounding basin. In no case shall any fill, levee, or other protective works be approved unless sufficient compensating adjustments of waterways, ditches, or impounding basins are made to prevent any appreciable expansion of flood hazard area. 5.3.7. Storm Drainage: An adequate drainage system, including necessary improved open channels, pipes, culverts, storm sewers, intersection drains, drop inlet, bridges, and other necessary appurtenances shall be installed by the subdivider and shall be according to plans and specifications approved by the Lexington County Stormwater Management Division. 5.3.8. Surveying and Engineering 8/18/23 MRB Draft. Version 5 3 a. Installation of Permanent Reference Points: Permanent reference points shall be placed in accordance with the following requirements: 1. General Standards: Boundary surveys shall be performed, in accordance with the state minimum standards published by the State Board of Registration for Professional Engineers and Land Surveyors, unless more stringent requirements are specified. A minimum of two points in any survey must be tied to the state plane coordinate system. The survey may be done on the horizontal ground distance and tied back to the state plane coordinates. 2. Control Monuments: Vertical control monuments shall be placed in or near the centerline of pavement of subdivision streets at a minimum of 1 per 4 acres. Where practical, control monuments shall be placed at points of curvature and points of tangency of curves. The control monument may be poured on the job or be a concrete marker of the type commonly used in the area: at least 3 feet long and tapered with a 12-inch long, 1/4-inch diameter brass or bronze rod embedded in the top. Control monuments shall be placed in a cast iron water main valve type box with a cover flush with the pavement. 3. Property Marker: A steel or wrought iron pipe, rebar, or the equivalent, not less than 0.5 inches in diameter and at least 24 inches in length shall be set at all property corners and points of curves, except those located by monuments. They shall be flush with the ground. 4. Accuracy: Land surveys within the Town limits shall be Class A surveys, set at an accuracy of at least 1:10000. 5.3.9. Improvement Guarantees a. Types Allowed: Prior to approval of a Final Subdivision Plat the applicant shall provide a performance guarantee to ensure the completion of required improvements within a period of time as agreed upon by the Administrator or Lexington County Engineer and the applicant, and expressed in the guarantee. Such guarantee may be in the form of a performance bond, a surety bond, a cash deposit, or a letter of credit. A performance guarantee shall be posted in the amount of 125% of the total cost of improvements, or in an amount otherwise approved by the Administrator or Lexington County Engineer. 1. Performance / Surety Bonds and Letters of Credit: The performance or surety bond, or letter of credit, shall be in a form acceptable to the Town. It shall include a pledge by the bank, insurance company or other bonding/lending institution that the funds necessary to carry out the terms of the agreement are guaranteed for payment, and will be released only upon receipt of written instruction from the Town. 2. Cash Deposits: If surety is in the form of a cash deposit with the Town of Chapin, proportional parts thereof shall be refundable in relation to progress payments less retainage, subject to approval of the Town and subject to a minimum deposit balance of 25% of the project cost. 8/18/23 MRB Draft. Version 5 4 3. Maintenance Guarantees for Private Streets: If the applicant completes all required improvements and complies with all conditions of the subdivision agreement as determined by the Town and Lexington County, the remainder of monies retained by a financial institution or by the Town may be released to the applicant or his successor in title. Prior to release, the applicant shall provide the Town and Lexington County, prior to the issuance of any building permit, a performance bond, a surety bond, or a cash deposit equal to the amount determined by Town and Lexington County that would ensure the repair of any damage to the existing improvements during the course of any construction, but in no case will the amount of the security be less than $1,000 for each individual building lot. Prior to the issuance of any certificate of occupancy, Lexington County and the Town shall determine whether or not any breakage or damage has occurred. If no damage to any off-site improvements has occurred, then Lexington County may release the security to the applicant or his successor in title. If damages have occurred, they shall be repaired, or the Town or County may draw on the security before it is released. 5.3.10. Street Layout Standards a. General Standards: All streets, which shall hereafter be established in connection with the development of a subdivision, shall comply with the following design standards: 1. The layout of the streets as to arrangement, character, width, grade, and location may be required to conform to the Town’s Master Plan, Official Maps, Comprehensive Plan, and other adopted plans involving transportation infrastructure. 2. Connectivity between compatible uses and adjoining street systems to reduce curb cuts on major thoroughfares and encourage local traffic to use alternative routes on local streets. Compatible uses are uses of similar intensity and characteristics permitted in similar zoning districts, as determined by the Administrator. 3. Where a subdivision abuts or contains an existing or proposed collector or through street, the Planning Commission may require marginal access streets, reverse frontage with screen planting, deep lots, or such other treatment as may be necessary for adequate protection of residential properties and to afford separation of through and local traffic. 4. Roads of an existing subdivision shall not be used as the sole means of ingress and egress in developing any new subdivision, minor or major, or extending an existing one unless granted by the Planning Commission. If, in the judgement of the Planning Commission, the increased traffic and noise would create a safety hazard or otherwise be 8/18/23 MRB Draft. Version 5 5 detrimental to residents of the existing subdivision, additional access shall be provided. b. Continuation of Existing Street Pattern Wherever topography will permit, the arrangements of streets in a subdivision shall provide for the alignment and continuation or projection of existing streets in adjoining areas. This is to mean the interconnectivity of subdivision developments. c. Block Sizes The Planning Commission shall examine every proposed subdivision as to its compliance with the following provisions: 1. Nonresidential Blocks: Non-residential blocks shall be of such length and width as may be suitable for their prospective use, including adequate provision for off-street parking, pedestrian connections, and service. 2. Residential Blocks: the length of residential blocks hereafter shall not exceed fourteen hundred (1400) feet or be less than six hundred (500) feet from corner to corner. Provided, however, such length requirements may be modified when appropriate due to the topography or physical shape of the property being subdivided. The width of any residential block shall be sufficient to permit two (2) tiers of lots, where topography and land ownership permits, except as otherwise provided in these regulations. 3. Crosswalks: When any type of block exceeds seven hundred (500) feet , crosswalks for pedestrians shall be required. The Planning Commission may grant relief to this requirement if there are sufficient crosswalks and alternate routes for pedestrian circulations within the site. When required, such right-of-way shall not be less than ten (10) feet wide and improved to include a concrete, asphalt or other approved surface sidewalk six (6) feet wide and four (4) inches thick. d. Connectivity to Adjacent Properties New developments shall, connect to any existing street stubs from adjacent properties and stub to all adjacent properties. Street stubs shall continue the existing street pattern if applicable. 1. Exemptions: Street stubs shall not be required where the conditions listed below would prevent connections: a. Topographical conditions (pre-development slopes of 18% or greater) b. Environmental conditions (marshes, floodplains, etc.) c. Property shape d. Property accessibility (existing platted subdivision with no stubs) e. Incompatible adjacent land uses 8/18/23 MRB Draft. Version 5 6 2. Location: Where multiple connection opportunities exist, street stub connections shall be prioritized in the site design as follows: a. Adjacent parcels 20 acres or greater in size. b. Adjacent parcels that abut or are traversed by existing or proposed streets. c. To minimize overall access points along an arterial or collector street. *Source: Summerville, SC Unified Development Code. 3. Design: Stub streets and streets intended for extension during future phases shall be constructed to extend to the property line or as close to the line as practical. It shall be the responsibility of the second development to construct the connection to an existing stub street. Stub streets shall not exceed 150 feet in length without a paved turnaround (permanent or temporary) 4. Adjacent Parking Areas: Where most feasible, parking areas that are adjacent to each other shall be connected to limit curb cuts and access points along the public right-of-way. This connection shall have a maximum width of 24’, with two 12’ wide travel lanes. e. Cul-de-sacs and Dead-End Streets 8/18/23 MRB Draft. Version 5 7 Dead end Streets are strongly discouraged and Cul-de-sacs are not encouraged to be a dominant feature within a development site as they can restrict opportunities for interconnectivity for local vehicular and pedestrian traffic. Dead end street and Cul-de-sacs shall be considered and approved by the Planning Commission during the preliminary plat stage. If a dead-end street or cul-de-sac is proposed, it shall be subject to the following: 1. Permanent dead-end streets shall be no longer than 500 feet and shall be provided with a turnaround such as a cul-de-sac. 2. Temporary dead-end streets shall be provided with a temporary turnaround area which shall be designed considering traffic usage, maintenance, and removal. 3. Half streets are prohibited along property lines, entire street right-of- way shall be platted within the proposed subdivision. 4. The Planning Commission may require the reservation of an access easement at the terminus of a cul-de-sac so that connections to existing or future pedestrian trails or street stubs may be established, if not possible elsewhere on the site. 5.3.11. Street Design Standards a. General When a subdivision creates new streets, they shall be subject to the street design standards of this section. The Planning Commission, in coordination with Lexington County and SCDOT when applicable, shall approve the street design, location, and classification during the review of the preliminary plat in the Subdivision process (Section 10.9). The following are general standards for the design of roadways: 1. SCDOT Standards: Intersection sight distance on major thoroughfares shall be determined by the State Highway Department. Grades on major thoroughfares shall be established by the State Highway Department. On major thoroughfares, the centerline radius of a curvature shall be determined by the State Highway Department. In the event of any conflicts or contradictions, administrator shall use the ARMS Manual by SCDOT, or defer to Lexington County Engineer, or authorized representative from SCDOT, as appropriate. 2. Traffic Control devices: Signs and/or signals, shall be installed by the Developer as deemed appropriate by the Lexington County, its agencies and/or the South Carolina Department of Highways and Public Transportation. The authority to require traffic control devices may be exercised by the Town at any time during the approval process. 3. Street Jogs: Street jogs shall be avoided, unless approved or recommended by SCDOT or Lexington County. 4. Naming of Streets: Streets that are extensions of, or obviously in alignment with existing named streets, shall bear that name. The name of new streets shall be subject to the approval of the Planning 8/18/23 MRB Draft. Version 5 8 Commission and shall not duplicate or be similar in sound to existing names in Lexington County, irrespective of the use of the suffix street, avenue, circle, way, boulevard, drive, place, or court or the like. Developers shall follow the Lexington County Addressing and Road Naming Ordinances. Street name signs shall be installed at all intersections within a subdivision. The location and design of such signs shall be approved by the Planning Commission and Lexington County. 5. Split Level Streets: Streets which are constructed so as to have two traffic ways, each at different levels within the same right-of-way, shall provide a paved traffic surface of at least twenty (20) feet on each level and a slope between the two traffic ways of three to one (3:1) or flatter 6. Intersections: The centerline of no more than two (2) streets shall intersect at any one point. Streets shall be laid out so as to intersect as nearly as possible at right angles and no street shall intersect any other street at an angle of less than sixty (60) degrees (angles of intersection to be measured at the intersection of street centerline). Curved streets shall have a minimum tangent of one hundred (100) feet at intersections. 7. Nonconforming Right-of-ways: Proposed Subdivisions which include an existing platted street that does not conform to the minimum right of way requirements of these regulations shall provide additional width along one or both sides of such street so that the minimum right of way required by these regulations is established. Subdivisions abutting only one side of such street shall provide a minimum of one half, measured from the centerline of the existing right of way, of the right of way required by these regulations. b. Street Sections During review of the sketch plan/preliminary Plat, the applicant shall identify all proposed streets and existing street classifications on the site plan. The applicant will be required to install all improvements within the development site. All private and public streets are subject to the requirements within this section and the requirements for Lexington County. Street Classifications Right-Of-Way (Min/Max)* Travel Lane Width (Min/Max) On-street parking** Planting Strip (both sides of street) Sidewalk 1. Residential or Light Commercial Collector 50’/66’ 12/16.5’ N/A 4’ 4’ 2. Residential Local 50’/60’ 11/12’’ Determined by PC 4’ 4’ 8/18/23 MRB Draft. Version 5 9 3. Private Commercial 50’/60’ 11’/12’ Determined by PC 4’ 4. Private Residential 50’ 10.6 Determined by PC 4’ 5. Downtown Street 50’/60’ 24’ Required 4’ 10’ 6. Private Rear lane (Residential) 20’ 10’ Determined by PC N/A N/A 7. Private Alley (Commercial) 24’ 12’ N/A N/A N/A *Right-of-way widths shall not be in conflict with SCDOT standards **All parking spaces shall comply with parking space dimensions in Parking Section. *Example Street Section, Source: City of Buffalo, NY - Unified Development Ordinance 1. Additional Standards for Streets: The intent of the Town’s street design standards within the UDO is to not conflict with the street design requirements of the Lexington County Public Works Department. In addition to the above table, private, local, and collector streets as described in the above table shall comply with street grade, horizontal curves, and intersection sight distance as required by SCDOT or Lexington County. c. Sidewalks 1. General Standards: Sidewalks shall be installed and shall be constructed on both sides of streets and to the specifications of Section 5.3.11.b. Sidewalks shall be constructed within the street right-of-way or public access easement, as reviewed and approved by the Town and Lexington County. Sidewalks shall be a minimum of 4 feet wide unless otherwise noted. 2. Timing of Sidewalk Construction: To ensure that all street improvements are constructed prior to the completion of a project, Sidewalk as required by Section 5.3.11.b, must be constructed before each house or 8/18/23 MRB Draft. Version 5 10 structure receives a final Certificate of Occupancy or, if the street is already constructed, prior to acceptance or approval of all improvements. This intent of this section is not to require the construction of a sidewalk at a time where permitted activities damage or otherwise impact the sidewalk. This does not apply to pedestrian paths or trails that will be provided outside of the normal right-of-way. 3. Existing Sidewalks: Where existing sidewalk abuts an area where new sidewalk is to be developed, the new sidewalk shall be the same width as the existing sidewalk if the existing sidewalk exceeds the standards in Section 5.3.11.b. In cases where it is appropriate, a new sidewalk may be permitted to taper down to the minimum width in Section 5.3.11.b. over a distance determined and approved by the Planning Commission. 4. Commercial and Multi-Family Developments: Within commercial areas and places with high pedestrian volumes, sidewalks should be designed to meet the anticipated pedestrian/traffic volume as well as accommodate outdoor seating. Multi-family and commercial developments shall provide sidewalks for interior movement of pedestrians and for interior to connect to public sidewalk system, as required by Article 8. d. Street Tree Planting Requirements 1. Planting Areas: Planting strips in accordance with cross sections in Section 5.3.11.b. 2. Location and Number: Street trees shall be planted at forty (40) foot intervals within five (5) feet of the street right-of-way on both sides of the street, but must be outside the right-of-way. Street trees shall be installed within the planting strip between the sidewalk and the curb of a street to ensure that the trees provide adequate shade and protection from vehicular traffic. Street trees may also be located in other locations, such as within public access easements, where practical and as determined by the Town and Planning Commission during the review of the Preliminary Plat 3. Applicable to TC and VC: Street trees may be installed within tree wells, and shall be installed to replicate existing spacing patterns of street trees. The Administrator, in coordination with Lexington County or SCDOT, shall determine the appropriate spacing of street trees. 4. Tree Species: Diverse species of street trees from the Town’s Approved Tree Species List shall be used. The street type, soil, and irrigation to be used should inform the species used. 5. Minimum Tree Size: At the time of planting, small maturing trees should be 2.5-inch caliper, with the lower side of the crown a minimum of 6 feet above grade to avoid hazards to pedestrians. 6. Tree Wells: Tree size and longevity is directly related to soil volume and quality; projects where tree wells are utilized will be evaluated on an 8/18/23 MRB Draft. Version 5 11 individual basis to determine the ideal size of the tree well for the application and context in an attempt to maximize volume. Where possible with new construction, a continuous trench of soil (even underneath hardscape) should be provided for root growth. 7. Root Guards: To ensure the protection of the street trees root system, as well as utility lines and paved surfaces, all street trees shall be installed with root guards. e. Street Lighting 1. General Standards: It is the intent of the town to have well-lit streets for cars and most importantly for the safety and comfort of pedestrians. Lighting shall be placed such that it is well coordinated with the expected canopy of street trees. Standard 15,000 lumen H.P.S street lights shall be installed, and appropriately shielded to prevent light spillover to adjacent properties. The Town of Chapin will require street lights to be installed at a minimum ratio of one light for every six units or 200’ whichever is less in residential developments. In nonresidential developments it one light per 175’ as measured by street length. The maximum height for street lights is 25’. Lighting plans with fixture designs and schematics shall be submitted and approved prior to installation. 2. Maintenance and Ownership: The developer shall be responsible for the operating cost of said lights at the standard rate subject to the rate and class of service approved by the South Carolina Public Service Commission. f. Exceptions 1. The Town recognizes that the required street sections and streetscape may not always be constructed as prescribed in this article. Reasonable relief may be granted by the Planning Commission if the connection to an existing right-of-way or construction of a new right-of-way encounters any of the following constraints: a. Insufficient existing street right-of-way b. Topographic features c. Conflict with SCDOT or County road project d. Legal constraints 5.3.12. Street Access Standards a. Applicability: Any development that requires an access point (rear alley/lane or driveway) for purposes of ingress and/or egress shall be subject to the provisions of this section. All new accesses must be approved by the appropriate permitting authority. The Town encourages developments that limit and/or combine access points to prevent high concentrations of access points along main roads. b. Maximum Number: For single-family, two- and three-family dwellings, only one driveway shall be permitted per lot. In Rural Districts (RA, RR) and Suburban Residential Districts (SR), circular driveways may be permitted on 8/18/23 MRB Draft. Version 5 12 lots greater than 100 feet in width. The maximum width for driveways in residential areas is 16’. Commercial driveways may have two lanes, ingress and egress, each 12’ in width, unless otherwise required by SCDOT. For double frontage lots, one curb cut per street may be permitted. For all other building types, the maximum number of driveways allowed for any property is outlined in the table below: Table 5.3.12.b Frontage Width Maximum Permitted Driveways per Street Frontage Up to 150 feet 1 driveway 150 feet or more 2 driveways c. Locations and Spacing 1. Street Intersections: No curb or other access point shall be located closer than 20 feet from the intersecting point of the 2 street right-of- way property lines involved. No curb or other access point shall be closer than 25 feet from the intersection of the 2 curb lines involved. 2. Spacing: All access points shall have a minimum separation from certain features as follows: Table 5.3.12.c.2 Access Point Locations and Spacing Feature Minimum Separation Adjacent Property Line (except shared driveways) 5ft* Another curb cut on local street 25ft** Less than 35 mph 200ft** 40 mph 250ft** 45 mph 300ft** 50 mph 400ft** 55+ mph 500ft** *May be waived or reduced by the Planning Commission in certain cases during preliminary plat review if not in conflict with a required buffer as described in Article 7. ** As measured from centerline of the driveway or street 5.4. Open Space 5.4.1. General Standards The Planning Commission shall require that open and green space be reserved for active or passive recreation where such reservations would be appropriate. Each reservation shall be of suitable size, dimension, topography and general access for the particular purposes envisioned by the Planning Commission. These areas shall be shown on the Plat and marked “reserved for recreation open space”. To ensure the orderly development of the community, the subdivider may be required by Town Officials or the Planning Commission to reserve and negotiate 8/18/23 MRB Draft. Version 5 13 to sell needed spaces for parks, schools, fire stations and playgrounds, as required by local governmental units, for a period not to exceed thirty (30) days from the date of submission of the Sketch Plan. The reservation period may be extended for one (1) additional thirty (30) day period if a governmental unit files with the Planning Commission a written statement indicating a desire to negotiate. 5.4.2. Amount of Open Space Required Development subject to these standards shall provide open space set-asides in an amount that meets or exceeds the minimum area in Table 5.4.2.a: Required Open Space, based on the use and the zoning district where the development is proposed. If there is a conflict with the requirements herein, this article shall govern. a. Required Open Space Table 5.4.2.a: Required Open Space Minimum Open Space Area (% of Development Site Area) Size of Development* Less than 10 acres 10-15 acres Greater than 15 acres District Agricultural (RA or RR) 50% 50% 50% Suburban Residential (SR1, SR2, & SR3) 20% 20% 25% Town Residential 1-2 (TR1 and TR2) 10% 10% 15% Town Residential 3 (TR3) 10% 20% 25% Village Commercial (VC) 5%** 5%** 10%** Town Center (TC) Exempt 5%** 10%** Commercial (CC, IC, OC) Exempt Exempt Exempt Public or Institutional (PI) 5% 5% 5% Industrial (LI) Exempt Exempt Exempt *This shall include the total area of a development, including properties involved in future phases (i.e. The entirety of all property(s)) Example: A 10-acre property that is being subidivded for a residential development within an SR1 Zoning District must allocated 20% or (2 acres) to one or more of the open space types in Section 5.4.3. **Shall consist of public, or quasi-public, spaces for either pedestrian connections, plazas, or other on-site amenities as determined by the Planning Commission. b. Specific Requirements for Major Subdivisions 1. Amenity Centers: It is the intent of this section to provide residents of sizable residential subdivision with quality amenities that add to the livability and quality of life. Depending on how many lots are within a residential subdivision, an amenity center shall be required. The amount of area allocated to open space shall comply with the percentages in Table 5.4.2.a. The Town classifies four types of amenity 8/18/23 MRB Draft. Version 5 14 centers, the requirements for each and their applicability requirements are as follows: a. Basic Amenity Area i. Number of Lots: 10 to 49 ii. Open Space Type: Each development shall include a walking trail (pervious or impervious), or connection to existing trail. A covered picnic area with a minimum of 2 tables and a designated area for recreation. b. Standard Amenity Areas i. Number of Lots: 50 to 149 ii. Open Space Type: A park of a naturally beautiful space and/or landscaped environment, including sitting areas, picnic tables, and potentially covered spaces, and a play area within a park setting including swings, jungle gym, or other similar features. Specific features shall be determined by Planning Commission during preliminary plat review. Shall have an improved trail within the development and connect to adjacent trails if applicable. iii. Recreation Facility: One type of sport court or field is required. Examples include basketball, tennis, volleyball, pickleball or tennis court, disc golf course, or other outdoor sport court or filed greater than 1,743 sq. ft. iv. Gated Boat Storage: If the development has water access to Lake Murray, sufficient space shall be provided for the dry storage of boats and boat trailers. The structure or area dedicated to boat storage shall have sufficient landscaping around the perimeter of the gated area, to be determined by the Planning Commission. Additionally, this area shall have a Type B buffer, as described in Section 7.5 when adjacent to a residential lot. c. Enhanced Amenity Areas i. Number of lots: 150 - 299 ii. Open Space Type: Two (2) play areas within a park setting, including swings, jungle gym, or other similar feature as determined by Planning Commission during preliminary plat review. Play areas shall be equally spaces and should be no more than 1,200’ linear feet from each other. Shall have an improved trail within the development and connect to adjacent trails if applicable. iii. Recreation Facility: One type of sport court or field is required. Examples include basketball or tennis court, disc golf course, volleyball court. 8/18/23 MRB Draft. Version 5 15 iv. Clubhouse: Minimum of 1600 square feet, including an indoor amenity such as a gym, sauna, and bathrooms or other similar community amenities. v. Swimming Pool: Minimum of 1800 square feet. Perimeter of the pool area shall be landscaped and included in the overall landscape plan. d. Major Amenity Areas i. Number of lots: 300 or more ii. Open Space Type: One play area per 150 lots that are not separated by 1,200’ as measured by walking distance along a sidewalk or trail. Play areas shall be developed within a park setting, including swings, jungle gym, or other similar feature as determined by Planning Commission during preliminary plat review. Shall have an improved trail within the development and connect to adjacent trails if applicable iii. Recreation Facility: Two types of sport court or field is required. Examples include basketball or tennis court, disc golf course, volleyball court. iv. Clubhouse: Minimum of 1600 square feet, including an indoor amenity such as a gym, sauna, and bathrooms or other similar community amenities v. Community Facilities: The applicant shall consider space for community facilities such as police and sheriff stations, fire stations, schools, libraries, and other community services due to the size of the development. The Planning Commission may request that the applicant provide correspondence as part of the record to ensure that these community services have been contacted. e. Exceptions i. Additional or Non-Listed Amenities: Other types of amenities may be submitted to the planning commission for consideration to replace one of the required amenities listed above. Any open space types in Table 5.4.3.a may be substituted for a similar feature within this section if approved by the Planning Commission. ii. Conflicts: Any conflicts with other regulations within this ordinance shall be resolved by the Planning Commission. If there are conflicts with existing topographical features, utilities, easements, or other type of hardship, a variance to these requirements may be submitted. Variances to these provisions shall have a recommendation by the Planning Commission first prior to the hearing by the Zoning Board of Appeals. 5.4.3. Areas Counted Toward Open Space Requirement 8/18/23 MRB Draft. Version 5 16 a. The features and areas identified as counting toward open space shall be credited towards compliance with the amount of open space required in accordance with Section 5.4.2.a above. Table 5.4.3.a: Open Space Types Open Space Type Description Parks A large public green area used for recreation or gatherings. Dedicated and designed green space area Plaza An open space that may be improved, landscaped, or paved, usually surrounded by buildings or streets. Square Open space that may encompass an entire block, is located at the intersection of important streets, and is set aside for civic purposes, with landscaping consisting of paved walks, lawns, trees, and civic buildings Playground A land use designed principally to offer recreation, passive or active, to the public Community Garden A private or public facility for cultivation of fruits, flowers, vegetables, or ornamental plants by the surrounding community. Pedestrian Passageway A publicly accessible path that navigates between buildings or developments to encourage pedestrian movement. Greenway A linear park, alternative transportation route, or open space conservation area that provides passive recreational opportunities, pedestrian and/or bicycle paths, and/or the conservation of open spaces or natural areas Trail, or Trail Connection A way designed for and used by equestrians, pedestrians, and cyclists using nonmotorized bicycles, sometimes a part of a local or regional system. b. The following areas shall not be counted as open space set-aside areas: 1. Private yards not subject to an open space or conservation easement; 2. Street rights-of-way or private access easements, including sidewalks located within those rights-of-way or easements, 3. Open parking areas and driveways including parking lot landscaping; 4. Land covered by structures, unless accessory to open space features of Table 5.4.3.a; 5. Outdoor storage areas; and, 6. Stormwater ponds not located and designed as a site amenity (e.g., with low fencing, trails, vegetative landscaping, gentle slopes, fountain or other visible water circulation device, and pedestrian access or seating). 5.4.4. Location Open space shall be located within the development site and be easily accessible and useable by occupants and users of the development. Where possible, a portion of the open space should provide focal points for the development through prominent placement or easy visual access from streets. 5.4.5. Configuration 8/18/23 MRB Draft. Version 5 17 a. Open space shall be compact and contiguous unless a different configuration is needed to continue an existing trail or accommodate preservation of natural features. b. If the development site is adjacent to existing or planned public trails, parks, or other public open space area, consideration should be given to adjoining, extending, and enlarging the trail, park, or other public open space area. 5.4.6. Ownership and Management a. All open space areas shall include deed restrictions, covenants, or other legal instruments that ensure continued use of the land for its intended open space purposes, in perpetuity, and provide for the continued and effective management, operation, and maintenance of the land and facilities. b. Responsibility for managing and maintaining open space rests with the owner of the land. Failure to maintain open space in accordance with this Section and the development approval shall be a violation of this Ordinance. 5.4.7. Exemptions The following development is exempted from the standards in this Section: a. Residential development that creates fewer than 10 dwelling units; b. Utility Uses; c. Agricultural Uses; and d. Industrial Uses 5.5. Alternative Development Patterns 5.5.1. Purpose: The alternative development options of this section allow for variety in development standards while maintaining the overall character of a neighborhood. These options have several public benefits: • They allow for development that is more sensitive to the environment, especially in areas; • They allow for the preservation of open and natural areas; • They promote better site layout and opportunities for private recreational areas; • They promote opportunities for workforce housing by allowing for a mixture of lot and building sizes, and • They promote energy-efficient development. 5.5.2. Applicability: The developer or applicant desiring to use these alternative development patterns within this section shall comply with the Major Subdivision application requirements. 5.5.3. Conflict With Other Regulations: If there is a conflict between the requirements for alternative development patterns and any other requirement of this Ordinance, the standards of this section take precedence, otherwise these 8/18/23 MRB Draft. Version 5 18 alternative development patterns are subject to all other applicable requirements of this Ordinance. 5.5.4. Conservation Subdivision a. Purpose: The use of conservation subdivision design seeks to optimize land use in and around the Town of Chapin, while maintaining a balance between the preservation of agriculturally, environmentally and historically significant areas and allowing reasonable and sustainable growth to continue in the Town. New development shall avoid disturbance of areas or elements defined as “sensitive” or “significant”. The use of conservation subdivision design shall not be required, but is encouraged for use on residential subdivisions: 1. ; 2. Located in certain identified areas of conservation (sensitive area overlay zones/districts); b. Application: The developer/applicant shall supply a completed subdivision application (Section 10.9, Major Subdivision) to the Administrator which shall include a draft of the conservation easement for the portion of the property that will remain as permanent open space or agricultural land and a fully dimensioned site plan, drawn to scale, which shall demonstrate, delineate, and label all of the following: 1. Topography, including areas to be graded, earth movements, drainage provisions, existing contour lines and any proposed new contour lines and any other significant topographical features. 2. The location and type of sensitive areas deemed to be of agricultural, environmental, or historical significance, as defined in Appendix I: Definitions of this Ordinance. All construction contracts shall include language protecting sensitive areas, agricultural land, areas of conservation, and areas containing sensitive elements. 3. The location and type of all proposed areas to be preserved as open space or agricultural land, including areas of mitigation and preservation. These areas shall be marked for identification upon site inspection. 4. Existing zoning, land use(s), and approximate density of residential uses. 5. Septic or waste water provisions as provided by SCDHEC. 6. For areas of agricultural preservation, a buffer strip of at least seventy- five (75) feet must be delineated. When possible, existing woodlands should be used, if not, a variety of rapidly growing indigenous trees and shrubs should be planted thickly in the buffer strip. 7. Any other provisions not specifically required or excluded herein, as required by this Ordinance. c. Density: The density allowed by the parcel’s zoning unless a density bonus is awarded to the developer by the Town of Chapin Planning Commission. 8/18/23 MRB Draft. Version 5 19 1. Density Bonuses: Density bonuses may be awarded to developers who dedicate land for public use, such as trails and parks. Additionally, density bonuses may be awarded for the provision of affordable or workforce housing for low to moderate income families. 2. Density bonuses up to an extra 4 du/ac per 10% of open space over the requirement. d. Open Space Requirements: A minimum of fifty percent (50%) of the parcel must be designated as permanent open space. 1. Ownership of Open Space: Shall be protected by a conservation easement held by the homeowners association, local conservation commission, land trust, or Town of Chapin that is recorded in the office of the County Registrar of Deeds. The owners of the open space are responsible for the payment of any taxes, upkeep, insurance, and any other responsibilities associated with “ownership” of the land 2. Usable Open Space: At least half of the required open space shall be useable for agricultural or passive, low-impact recreational purposes, as determined by the Planning Commission. e. Final Plat Requirements 1. In addition to the final plat requirements conditioned by subdivision approval by the Planning Commission, and requirements in Article 10. Included with the final plat, the subdivider shall submit a subdivder’s agreement regarding the liability for and maintenance of the open space. In addition, the subdivider must include a conservation easement/open space covenant protecting the open space from any further development. f. Appeals 1. Any appeals to the decision regarding this section shall follow the appeal process outlined for subdivision applications (Article 10). 5.5.5. Commercial or Industrial Subdivision a. Purpose and Intent In order to prevent creation of traffic hazards, insure the provision of off- street parking and provision of necessary utilities, plans for Commercial Subdivisions such as shopping centers, industrial parks, and mixed-use areas where the site is not subdivided into lots and public streets, but is retained in one ownership, the site plan shall be submitted to the Planning commission for review and approval. These regulations are considered minimum and may be superseded by more restrictive regulations such as the zoning ordinance. b. Types of Commercial Subdivisions 1. Group commercial or industrial developments consist of more than one commercial or industrial structure erected on a single lot. 8/18/23 MRB Draft. Version 5 20 c. Application Process: The developer/applicant shall supply a completed subdivision application (Section 10.9) to the Town of Chapin. In addition, the following shall be required, unless otherwise determined by the administrator: 1. Site Analysis consistent Section 10.3.1.a 2. Site Plan consistent with all relevant information detailed in Section 10.3.1.c. 3. Traffic Impact Study consistent with the requirements of Section 5.6 4. Construction Documents consistent with Section 10.3.1.d. d. General Standards for Commercial Subdivisions: In addition to other requirements within this Section, the applicant shall demonstrate compliance with the following: 1. Conformance with Ordinance: The submitted applications shall be compliance with standards and requirements for parking, signage, setbacks, spacing between buildings, residential area requirements, screening, buffers, and landscaping for Commercial Subdivisions. 2. Water, Sewer, and Drainage: Adequate provisions for water supply, sanitary sewerage, and storm drainage shall be installed by the developer according to the plans and specifications approved by the proper authorities. 3. Access and Egress: shall conform to the Driveway Regulation of the South Carolina Department of Transportation, the Town of Chapin’s Unified Development Ordinance (UDO), and the Traffic Impact Study findings. 4. Enforcement: No building permits shall be issued and no connection to a public water system or public sewer system shall be made until the construction drawings for the Commercial Subdivision are approved by the Planning Commission staff and so noted on prints of the development plan. 5.5.6. Planned Developments (PD) a. Purpose and Intent: The PD is intended to encourage innovative land planning and site design concepts that cannot be achieved by other mechanisms provided by this Ordinance. PDs should achieve a high level of environmental sensitivity, aesthetics, high quality development and other community goals by: 1. Allowing greater freedom in selecting the means to provide access, open space and design amenities. 8/18/23 MRB Draft. Version 5 21 2. Promoting quality urban design and environmentally sensitive development by allowing development to take advantage of special and unique site characteristics, locations, building types and land uses. b. Process and Applicability 1. PDs are considered a two-step process. First, there is a Rezoning which follow the general procedures of Article 10. Second, a Final Plat approval, per Article 10 shall occur. A complete master plan and written report shall be developed and submitted for approval as part of the rezoning process in order to determine the desired standards and design of the project. Those documents shall be submitted in accordance with the following standards: a. Master Plan: Applicants shall first develop and present a master plan, complying with the Sketch Plan requirements in Article 10, for the entire parcel which includes, but is not limited to: i. Size: Size, in acres, shall be listed on the master plan. PDs shall have a minimum of 10 acres. If the project is intended to be developed in phases, the master plan shall include all phases. ii. Districts: Land allocations by land use, including specific modifications to the Ordinance requirements of those districts clearly highlighted. iii. Street Layout and Regulating Plan: The design and location of the streets shall be provided. Streets shall conform with the street sections in Article 5 of this Ordinance. Additional bicycle and pedestrian circulation shall also be indicated. iv. Lot Layout: Proposed subdivisions of property, required open space, street regulating plan, neighborhood structure(s). The PD shall have provisions to allow for a systematic methodology to provide a variety of lot sizes. v. Open Space: Subject to Open Space requirements in table. These should be clearly indicated on the master plan. vi. Stormwater Requirements: Stormwater shall be considered on a PD-wide basis and the general locations shall be indicated. Floodplain information shall also be included on the master plan. vii. Resources: The general location of all historic, cultural, and environmentally sensitive resources shall be depicted on the master plan. b. Written Report: A written report shall be submitted to explain the type, nature, intent and characteristics of the proposed development, and shall specifically include: 8/18/23 MRB Draft. Version 5 22 i. Site Description: A general description of the proposal, including a detailed description of the site, location, context, and any cultural, environmental and/or historic resources. ii. Vision Statement: The goals, tenets, any special initiatives which the development intends to achieve shall be clearly identified for review and discussion. iii. Rationale: A detailed description of the provisions of the Ordinance which prevent the development, as desired shall be provided. This shall include analysis showing how the general Land Development standards in Article 5, Permitted Use Table in Article 4, and Zoning Districts in Article 3 limit the intended development. Specific descriptions of all amenities, building types, or land uses that are not defined in the Ordinance shall be required. iv. Modification to Ordinance: A detailed description of exceptions or variations from the requirements of this Ordinance, per the incompatibilities listed above. All items not explicitly listed as modifications will be subject to the requirements of this Ordinance. v. Land Allocation: Tables showing the total number of acres in the proposed development and the percentage designated for each proposed type of land use, including open spaces, recreation areas, public facilities, wetlands and wetland impacts. This should be coordinated with the Districts as shown in the master plan. If the development is intended to be phased, the phasing plan shall be indicated on the tables. vi. Program: A complete development program, including number of residential units and proposed densities, building types, minimum and maximum lot sizes, and square feet and identification of other nonresidential uses. vii. Building Design Standards: Guidelines to achieve aesthetics and high-quality development shall be included. These may be further detailed in the covenants after all Town approvals have been secured. viii. Compatibility Statement: A statement of how the proposed development is consistent adopted plans and documents of the Town of Chapin or Lexington County. ix. Traffic Impact Study (TIS): A Traffic Impact Study to be performed as outlined in Section 5.6. x. Interconnectivity: xi. Other: Additional relevant information as requested by the Administrator. c. Performance Guarantee: Before approval of a PD, the Town Council may require a contract with safeguards satisfactory to the Town 8/18/23 MRB Draft. Version 5 23 guaranteeing completion of the development plan in a period to be specified by the Town, but which period shall not exceed 5 years unless extended by the Town for due cause show. Such guarantee may include the submission of a performance bond in an amount set by the Town. d. Final Plat: Upon approval of the Rezoning (inclusive of the master plan), the applicant shall proceed towards approval of a Final Plat Article 10. 2. Expiration of Approval: The Town shall have the right to review a concept plan approved as part of a PD when no building permits have been issued in the past 2 years, and may choose not to issue further permits within the PD until a revised concept plan has been approved. 5.5.7. Previously Approved Planned Developments a. Purpose: The intent of this section is to be utilized only for the continuation of previously established and approved Planned Developments before the enactment of this Ordinance. b. Minor Plan Amendments Permitted by the Administrator: The amendment of previously approved PDs shall be approved by the Administrator, if the amendment results in a development intensity that is no greater than the previously approved intensity in terms of total square feet, total number of units, height, and build-upon area. Additionally, a minor plan amendment shall be limited to technical considerations that could not be reasonably anticipated during the approval process, or any other change that has no material effect on the character of the approved PD development or any of its approved terms or conditions. c. Major Plan Amendments Permitted by Town Council Approval Only: All major changes not subject to the section above, shall be reviewed by the Planning Commission (PC) and approved by Town Council in accordance with the procedures outlined in Section 5.5.6.b. d. Any existing PD may choose to rezone to a standard Town zoning district by going through the rezoning process in accordance with the procedures outlined in Article 10. 5.6. Traffic Impact Study 5.6.1. Applicability An impact study shall be required if a proposed project: a. Produces 50 peak hour (AM, PM, or Midday) two-way trips or more; or b. Produces 500 daily (24 hour) two-way trips or more; or c. Expansion of existing development that would produce additional traffic, meeting or exceeding the thresholds within this section. When determining 8/18/23 MRB Draft. Version 5 24 whether the project meets the threshold, trips from the existing land use shall be included in the trips that are considered “produced” by the project. 5.6.2. Application Process A TIS shall be completed as the first step of the project approval process. Prior to the submission of any TIS and preliminary plat, the applicant shall complete and submit a Traffic Impact Study Requirement Evaluation form obtained from the Administrative Official’s office. The Town will evaluate the request and determine whether a TIS is required. The TIS is the responsibility of the applicant. The TIS shall be prepared in accordance with the Traffic Impact Study Guidelines adopted by the Town of Chapin and obtained from the Administrative Official’s office. All traffic studies must be prepared under the supervision of, and signed, stamped and dated by, a professional Civil Engineer registered in South Carolina. Coordination with other entities in the county government or South Carolina Department of Transportation (SCDOT) shall be the responsibility of the applicant. All phases of a development are subject to review, and all traffic plans for the entire development shall be integrated with the overall traffic analysis. 5.6.3. Contents Traffic Impact Study (TIS) a. Study Contents: At minimum a TIS shall include the following: 1. Introduction: A written narrative describing the proposed land use(s), size, and projected opening date of the project and all subsequent phases. 2. Existing Land Use 3. Proposed Land Uses a. Location and context b. Description of development c. Zoning Characteristics d. Site Plan 4. Recently approved (within the last 12 months of application submittal) developments within (a certain distance as measured along the nearest public street or road). 5. Analysis a. Existing traffic volumes on all roads to be accessed using current SCDOT Annual Average Daily Trip (AADT) counts where possible. b. Infrastructure Analysis c. Trip generation tables d. Trip distribution patterns e. Turning movement diagrams for peak hours f. Access analysis g. Traffic Control Devices h. Mitigation and Alternatives 8/18/23 MRB Draft. Version 5 25 i. Summary b. Responsibility for Costs of Improvements: The costs of implementation of an approved mitigation program shall be the responsibility of the applicant. No certificates of zoning compliance or building permits shall be issued unless provisions of the TIA are met. 8/15/23 MRB Draft. Version 6 Article 6 – Overlay District Design Standards 6 .0 Overlay District Design Standards 6 .1 Purpose and Intent The standards for the architectural review overlay districts are based on the vision statement and land use element of the comprehensive plan. The intent of these standards is to develop design criteria that, produce aesthetically desirable buildings, produce buildings that provide a sense of character and identity, promote the pedestrian orientation of downtown, promote the preexisting look and character of areas throughout the Town, encourage individuality, harmony, and character in the design of new developments, redevelopments, and adaptive reuse of existing buildings. 6 .2 Boundaries The standards in this Article are applicable all properties located within an Architectural Review Overlay District (Figure 6.2.1). Every property within the Town is within one of the three overlay districts established by this ordinance. For the purposes of this section, the front of lots shall be defined as frontage along a public right-of-way or sidewalk. Fi gure 6.2.1 Architectural Review Overlay Districts (INSERT MAP) 6 .3 Conflicts With Other Regulations In the case of conflict between the standards set forth in this Article and any other regulation within the Unified Development Ordinance (UDO), the more stringent standard shall apply, as determined by the applicable review body. 6 .4 Applicability of Design Standards All properties within the Town fall within one of the three architectural overlay districts. Any project that requires a Major Architectural Review as defined in Section 10.6. 6 .5 Architectural District Standards 6.5.1 Applicable to all overlay districts The standards within this section are shall be applied to all overlay districts (Town Center, Boulevard, and Gateway) as designated by the Town. In addition to and following this section, other regulations specific to each overlay shall be met. a. Bu ilding Design 1. Unified Design: If there are multiple buildings within a single, or phased development, a unified architectural design shall be incorporated into each building or development. 8/15/23 MRB Draft. Version 6 2. Accessory buildings shall use the same building materials and color schemes as the principal structure. 3. Paver and Patio Materials: Pavers and outdoor surface materials for accessory uses such as porches, patios, or other areas shall be distinct from those on public sidewalks or use a different pattern, color o r m aterial. 4. Building Materials: Exterior building design shall be coordinated with regard to color, types of materials, architectural form, and detailing. Development within the overlay districts shall adhere to the following provisions: a. Buildings are required to have different materials for foundation, building wall, and roof top elements, with a maximum of three d ifferent types of materials to be used. Acceptable materials may include stucco, brick, stone, wood, or substitute materials that are designed to replicate one of the stated materials. 5. Color of Building Materials: 6. Building Entrances: Primary Entrances shall accommodate pedestrian access from the street(s) and parking lots. Secondary public entrances, if p rovided, shall be designed in a manner consistent with primary entrances if facing public streets, parking lots, or property owned by the Town of Chapin. 7. Specific to Windows and Doors: Mill finished aluminum metal windows or doorframes are not permitted 8. Paint Colors: Colors used shall be harmonious and compatible with one another. All colors shall be from the approved paint color palette list or ap proved by the Architectural Review Board. Colors of paint and materials shall be subject to the following: a. Color schemes shall include a maximum of four colors. b. Frequent changes in material or color should be avoided. 9. Rooftop Elements: No flat or parapet roofs for buildings under 20,000 sq. ft.?. Minimum roof pitch shall be 4:12. All rooftop amenities shall h ave a direct relationship to the principal building or complex regarding building materials, barriers, and other amenities. Skylights, solar panels, satellite dishes, antennas, or other attachments, determined by the Administrator, shall be placed so that they are screened from view at the eye level of the pedestrians on the sidewalk along the street right- of-way. a. Ductwork, plumbing or other mechanical additions installed to the sides of the buildings that are visible from the sidewalk or public right-of-way shall be integrated into the overall architectural style of the structure by the use of similar materials and color schemes. 10. Awnings and Canopies: Awnings shall be an accessory to the building’s design, and shall not be the predominant element of the façade. Ground level awnings may display the business name and logo provided 8/15/23 MRB Draft. Version 6 they do not cover more than 25 percent of the surface area of the awning. Awnings shall not be internally lit. Awnings should not span across more than one window or door opening, unless otherwise permitted by the Architectural Review Board. 11. Drive-through windows: Drive-through uses shall adhere to the following design requirements: a. Drive -through elements shall be architecturally integrated into the side or rear of the of the principal building. b. Drive-through elements shall be constructed of materials and finishes which are consistent with the principal building. 12. Automobile Service Stations a. All structures, including canopies over gasoline pumps, and car wash structures, shall be compatible in scale, proportion, detail, materials, color, site planning and landscaping. b. Canopies designed as dominant architectural features are not permitted. b. Parking 1. Driveways: The maximum width of curb cuts shall be 12 feet for one- way drives and 24 feet for two-way drives. Additional width may be provided, at the discretion of the Administrator, to allow for safe turn radii at the point of intersection between driveway and the public street. 2. Shared Driveways: Driveways that serve more than one property may be provided, and should be encouraged. Parking areas that are constructed within the same development or project shall b e c onnected. 3. Exceptions: Wider curb cuts for driveways containing a landscaped median may be allowed with the following provisions: a. The combined width of the landscaped median and the drives shall not exceed 55 feet. b. Lanes shall be clearly marked and striped. c. The landscaped median shall be a minimum of five feet, planted with groundcover and low-growing shrubs. d. Ornamental trees may be placed within a landscaped median provided they do not impede the sight lines for traffic. e. Mulch will not be allowed as an acceptable ground cover, but may be used under the plant material. c. Fences and Walls Fencing and wall materials, colors, and design shall be consistent with the site and architectural design and predominant materials of the principal structure. In addition, fences or walls shall adhere to the following provisions: 8/15/23 MRB Draft. Version 6 1. Shall be composed of masonry, ornamental metal, wood, stucco or a c ombination of these materials and constructed with the finished side facing the exterior property line. 2. Fences and walls greater than 50 feet in length or six feet in height shall h ave a change in plane, height, material or material texture or s ignificant landscape massing. d . Building Lighting: The style of light fixtures shall be in keeping with the arc hitectural style of the building and shall not impact surrounding or adjacent properties. 1. L ow intensity architectural trim lighting intended to highlight specific features of the principal structure(s) façade is permitted provided it meets all of the following conditions: a. It is comprised of no more than two colors b. It is not a dominant feature on the building façade c. It does not move and is not animated. e. O utdoor Areas and Seating 1. Decorative features, including water features/fountains, benches, and art, may be permitted on a case-by-case basis by the Architectu ral R eview Board. 2. No permanent storage of containers or utility carts for food and/or b everage service shall be permitted. 3. Furniture shall be of durable material such as wood or metal, designed specifically for outdoor use. 4. Furnishings not in use may not be stacked or stored on the exterior of the building within view of the public right-of-way or sidewalk. 5. The use of umbrellas is permitted subject to all of the following conditions: a. They do not exceed 10 square feet in diameter. b. No more than 20 percent of the total exterior surface of the umbrella is covered in commercial copy, corporate trademark or business logos. c. They are constructed of color-fast, flame retardant fabric. d. They do not encroach over the pedestrian barrier or onto any right- of-way 6. Outdoor dining must be separated from the right-of-way and sidewalk by a pedestrian barrier meeting all of the following conditions: a. Pedestrian barriers must be constructed of a sturdy, secured, stable and weatherproof material and may include plant material. b. Pedestrian barriers must be at least 36 inches in height, but sh all n ot exceed six feet in height. If the barrier exceeds four feet in 8/15/23 MRB Draft. Version 6 height, the upper two feet must be designed to allow clear line of sight from the sidewalk into a seating area to promote the public safety. c. Painted surfaces must be kept free of fading, chip, and rust. d. Barriers using chain or rope are prohibited. 7. Planters may be permitted subject to all of the following conditions: a. Planters may not exceed a maximum height of 36 inches above th e le vel of the sidewalk not including the plant material. b. Plants that are planted in the ground and that are situated around a perimeter of a building or outdoor dining area may not exceed a height of four feet above the level of the sidewalk c. Plants must be maintained in a healthy condition. d. Empty planters or planters containing only bare dirt, mulch, straw, wood chips or non-living material and planters containing plants considered hazardous, or otherwise unsuitable for close urban areas are not permitted. 6 .5.2 Town Center Overlay District The standards within this section shall apply to all properties located within the Town Center Overlay District. a. Building Façade Design 1. The façade step-back area may be used to provide upper story patios or other useable outdoor areas with rails and safety barriers to integrate into the overall architectural style of the structure. 2. Principal entrance facades shall have at least one change of plan o r s ignificant architectural detail for each 50 feet of unbroken horizontal p lane. 3. Secondary facades visible from public streets or parking areas shall have a change in plane or architectural details along 60 percent of their horizontal length. 4. Ground floor facades visible from public streets or parking areas shall have a change in plane or architectural details along 60 percent of the ir h orizontal length. 5. Secondary facades shall be designed with detailing similar to the principal facades. 6. Balconies shall be compatible with the scale, location, and use of the structure b. Windows, Transparency and Fenestration 1. A minimum of 30 percent of the grade level façade abutting the public right-of- way or sidewalk or which fronts a parking lot shall be window surface area. 2. Glazing must be at least 70 percent transparent for windows abuttin g t he sidewalk or public right-of-way. 3. The maximum height of the sill above the sidewalk shall be 36 inches. 8/15/23 MRB Draft. Version 6 c. Roofs 1. Buildings less than 20,000 square feet must have a minimum 6:12 pitched roof. d. Awnings and Canopies 1. The size, scale, color and materials of the awnings shall be compatible with the rest of the building. 2. Awnings on the ground level shall be a minimum of nine feet and maximum of 12 feet above the finished grade and may project over th e p ublic sidewalk. 3. If the awning runs the entire length of the ground floor, it shall be on the same plan as any awning that abuts it on neighboring buildings. 4. Awnings over any windows on the second or above floors, shall be centered over the window. e. D ecorative Features 1. All decorative features shall be shown on the building elevations provided by the applicant to the ARB, detailing height, location, and type of installation(s) proposed f. C onnectivity 1. Sidewalks: Along facades with a customer entrance and along any façade abutting public parking areas, sidewalks at least five feet in width shall be provided along the full length of the façade. 2. Walkways shall incorporate at least two of the following features: a. Landscaped areas along at least 30 percent of their length. b. Use of smaller scale pavement (pavers or scoring). c. Pedestrian scale lighting. d. Rain protection such as an awning or arcade. 3. Cross access easements shall be provided for abutting, compatible uses g. Outdoor Seating 1. Outdoor seating serving an eating establishment or other permitted us e m ay be permitted between the front building line and the right-of-way p rovided any service areas such as bars and waitress stations are located on the side or rear of the building inside the main structure. 6 .5.3 Boulevard Overlay District a. For sites with multiple buildings, service routes shall be separated from primary customer circulation. b. Building Design 1. Building Frontage: Single Buildings: For single buildings, a minimum of forty (40) percent of the front façade shall be located within eight (8) and thirty-five (35) feet of the front setback. 8/15/23 MRB Draft. Version 6 a. Sites with Multiple Buildings: For multiple buildings, a minimum of 40 percent of the linear frontage of parcel (property) shall be occupied by a building façade within front setbacks b. Rooftop Elements: Flat roofs meeting all other exterior standards are permitted 2. Outdoor Seating a. Outdoor seating areas supporting a drinking place shall only be permitted in the side or rear yard behind the front building line, unless the outdoor seating area is directly adjacent, or a part of, the building’s primary entrance 6 .5.4 Gateway Overlay District a. Sites with Multiple Buildings 1. For sites with multiple buildings, service routes shall be separated from primary customer circulation. b. c. Building Façade Design 1. Sites with Multiple Buildings: Buildings shall be compatible with the scale of adjacent structures and the pattern of the surrounding area. 2. Façade Design a. The façade step-back area may be used to provide upper story patios or other useable outdoor areas with rails and safety barriers to integrate into the overall architectural style of the structure. b. Principal entrance facades shall have at least one change of plan o r s ignificant architectural detail for each 50 feet of unbroken horizontal plane c. Secondary facades visible from public streets or parking areas shall h ave a change in plane or architectural details along 60 percent of t heir horizontal length. d. Ground floor facades visible from public streets or parking areas shall have a change in plane or architectural details along 60 percent of their horizontal length. e. Secondary facades shall be designed with detailing similar to the principal facades. f. Balconies shall be compatible with the scale, location, and use o f th e structure 3. Windows, Transparency and Fenestration a. A minimum of 30 percent of the grade level façade abutting the public right-of- way or sidewalk or which fronts a parking lot shall be window surface area. b. Glazing must be at least 70 percent transparent for windows abutting the sidewalk or public right-of-way. c. The maximum height of the sill above the sidewalk shall be 36 inches. 8/15/23 MRB Draft. Version 6 4. Roofs a. Buildings less than 20,000 square feet must have a minimum 6:12 pitched roof. 5. Awnings and Canopies a. The size, scale, color and materials of the awnings shall be compatible with the rest of the building b. Awnings on the ground level shall be a minimum of nine feet and maximum of 12 feet above the finished grade and may project ove r t he public sidewalk. c. If the awning runs the entire length of the ground floor, it shall be on the same plan as any awning that abuts it on neighborin g b uildings. d. Awnings over any windows on the second or above floors, shall be centered over the window. 6. Outdoor Seating a. Outdoor seating areas supporting a drinking place shall only be permitted in the side or rear yard behind the front building line, unless the outdoor seating area is directly adjacent, or a part of, the building’s primary entrance. 8/18/23 MRB Draft – RG – Version 5 Article 7 – Landscaping, Buffers, and Tree Preservation 7.0 Landscaping, Buffers, and Tree Preservation 7.1 Purpose and Intent The Town of Chapin recognizes that healthy natural environments provide important benefits that generally promote public health, safety, order, aesthetics, prosperity, local ecology and general welfare. In support of these objectives, this ordinance regulates and mitigates the negative impacts of the development on natural resources, such as trees and vegetation, and to preserve and enhance the aesthetic and ecological values of landscapes. Further, this section details requirements that help promote the following: • Provision of open space • Preservation of green space • Creating an attractive community • Increase general property values • Protect scenic and ecologically sensitive resources • Reduce stormwater volume and pollutants • Benefit the public health and enjoyment of residents • Eliminate heat islands • Shelter and protect habitats for wildlife • Reduce conflict between different uses and intensity of uses 7.2 Administration 7.2.1 Applicability Except as contained herein, the regulations within this article shall apply to the following: a. All new development. Redevelopment of parcels, buildings, or structures are subject to Section 11.11, Nonconforming Site Features. b. Development requiring Minor or Major Architectural Review (Section 10.5 and 10.6). c. Regulations pertaining to tree removal shall apply to all properties within the Town’s jurisdiction. d. New parking areas or existing parking areas expanded by more than 50% or by 12 spaces or more. e. Other areas within this article that specifically identifies an applicable situation or development. 7.2.2 Timing Review for compliance with the standards in this Section shall occur during the applicable development review procedures within Article 10. 7.2.3 Landscape Plan Required A landscaping plan shall be submitted with an application for development subject to the requirements of this Section. The landscaping plan shall depict the following: 8/18/23 MRB Draft – RG – Version 5 a. North Arrow and Scale. b. Topographic information and final grading adequate to identify and properly specify planting for areas needing slope protection. c. Tree survey to include size and species including an identifying numbering system to distinguish between individual trees; the tree number shall be on the tree itself and notated on the survey. In addition to if they are defined as Significant, Historic, or Iconic Trees according. d. The location and contours, at one (1) foot intervals, of all proposed berms as landscaped features. e. Property Survey showing the location and dimensions of all existing (to remain) and proposed structures, setback line and required buffer yards, parking lots, driveways, landscaped islands and strips, sidewalks, service areas, screening, fences, walls, berms, above or underground utilities and storm drainage systems, freestanding electrical equipment, recreational facilities, and other freestanding structural features as determined necessary by the Town. f. Location of plant material, including name of plants (botanical and common), installation size, spread at time of planting and at maturity, quantities of plants, and other remarks as appropriate to describe plant selection. (lawns and beds of annual or perennial plants may be designated by common names only) g. Onsite and abutting land use features [within 50 feet], and use(s) of adjacent parcel(s). h. Protection plan for existing trees that are to be saved i. Location of irrigation systems. 7.2.4 All landscaping plans for nonresidential and multi-family sites having an area greater than one acre shall be prepared by a registered landscape architect. 7.2.5 Landscaping plans for sites having an area of one acre or less may be prepared by other design professionals with competency in landscape design when the design is incidental to their work. 7.2.6 The Administrator may approve revisions to landscaping in an approved site plan in order to accommodate seasonal planting problems or a lack of plant availability as long as: a. There is no significant reduction in the quantity of plant material. b. There is no significant change in the size or location of plant materials. c. The plant substitutions are of the same general category and have the same general design characteristics as the materials being replaced. 8/18/23 MRB Draft – RG – Version 5 7.3 Landscaping Standards 7.3.1 Undeveloped Commercially Zoned Parcels For the purposes of this Section, commercially zoned parcels shall include the Town Center (TC), Village Center (VC), Public Institutional (PI), Corridor Commercial (CC), Interstate Commercial (IC), Office Commercial (OC), and Light Industrial (LI) zoning districts. Undeveloped Commercially Zoned Parcels shall have planted or naturally occurring vegetation maintained by the property owner while vacant to maintain an attractive appearance. Vegetation shall consist of topographically/geologically appropriate or native grasses, shrubs, trees, live ground cover, annuals, perennials, ornamental grasses or other vegetation that will secure the soil and create an attractive appearance, in compliance with Town property maintenance standards within Article IV. – Vacant Lots, Premises, Land – Section 10.401 of the Town Code 7.3.2 Clearing of Land, Removal, or Disturbance of Trees It shall be unlawful for any property located within the Town limits to clear land of trees, shrubs, and natural feature without receiving approval from the Administrator. Violations to this requirement shall follow the procedures in Article 12 Violations and Enforcement. 7.3.3 Installation of Required Landscaping a. Unless a bond is provided in accordance with the sections below, all landscaping required by this Section shall be installed prior to the issuance of a Zoning Permit. b. If the season or weather conditions prohibit planting of trees or shrubs, the developer may provide a bond, an irrevocable letter of credit, or other financial surety in an amount equal to 125 percent of the cost of installing the required landscaping to guarantee the completion of the required planting. A zoning permit for the development shall be issued only on approval of the financial surety. All required improvements must be completed within the time period established in the development approval, or within 24 months of the date the developer provides financial surety, whichever period is shorter. The developer may request, and the Administrator may grant, for good cause shown,. The financial surety shall be canceled and/or returned upon completion of the required landscaping. If the developer fails to complete all required improvements within the period for completion, as may be extended, the Administrator shall send written notice to the developer identifying the failure(s) and providing the developer a period of 30 days to complete the required improvements. If the required improvements are not completed within the 30-day period, the Town may draw on the financial surety to complete the required improvements. 8/18/23 MRB Draft – RG – Version 5 c. Clustering and/or random spacing of plants and trees is encouraged to produce a natural appearance in the landscape, except where uniformity is required for opaque screening. d. Landscaping, including berms, shall be installed, and maintained so as not to interfere with the sight distance requirements of this ordinance or the sight distance needs of vehicular traffic in parking areas and at entrance and exit locations. e. Monocultures shall be avoided in formally designed parks, buffers, and screens. f. When there is a conflict with the quality, planting requirements, trimming, or removal of vegetation, the applicable ANSI Standards shall apply. 1. ANSI Z60.1 American National Standard for Nursery Stock 2. ANSI Z133.1 American National Standard for Arboricultural Operations 3. ANSI A300 American National Standard for Tree Care Operations 7.3.4 Credit for Existing Vegetation Existing vegetation in good health that meets all applicable standards in this Section may be used to satisfy any planting requirements, provided the vegetation visually enhances the aesthetic of the property and is protected before and during development. 7.3.5 Species of Vegetation Vegetation shall be adapted to the site conditions where it will be planted. The selection of trees, shrubs, and other vegetation shall be from the Town of Chapin’s Approved Tree Species List , or suggested climate and region appropriate species maintained by the South Carolina Forestry Commission is encouraged. The use of species identified as invasive plant pest species by the South Carolina Exotic Pest Plant Council is prohibited. 7.3.6 Irrigation Except for individual single-family lots, all newly-planted and relocated plant material shall be watered by permanent irrigation systems. Trees shall be watered at a reasonable rate or as needed based species, size, soil type, and local weather conditions. All other vegetation shall be watered sufficiently to ensure healthy growth and longevity in the landscape. 7.3.7 Tree and Shrub Types The following Tree and Shrub types referenced in this article are defined as follows: a. Canopy Tree: At least 25 feet in height or more at maturity. 1. Minimum Caliper measurement at planting shall be 2.5” diameter or greater b. Understory Tree: Less than 25 feet in height at maturity. 1. Minimum Caliper measurement at planting shall be 2.5” diameter or greater. 8/18/23 MRB Draft – RG – Version 5 c. Shrub: Less than 10’ in height at maturity 1. Minimum Height at planting shall be 2’ 7.3.8 Tree and Shrub Spacing and Proximity to Structures and Paving The intent of this section is to install vegetation appropriately depending on their size or characteristics, while not harming or potentially harming other plants, proposed buildings, vehicles, or pedestrians. a. Shrubs and trees shall be installed no closer than two feet to a curb, gutter, sidewalk or building. b. Understory trees shall be planted no closer than 10 feet to a building Canopy trees no closer than 25 feet to a building, unless otherwise required. c. Shrubs shall not be planted within six feet of tree trunks. 7.3.9 Screening Unsightly Elements a. Utilities: Mechanical equipment such as ventilation systems, commercial exhaust fans, rooftop terminations, commercial cooling equipment, heating and air conditioning units, TV antennas, and satellite dishes, shall be completely screened from view at time of planting or installation by lattice, fence, brick enclosures, vegetation, or combination thereof. b. Waste Receptacles: Screening of waste receptacles, compactors, and dumpsters shall be accomplished with an opaque wall of masonry, rot- resistant wood, or composite material. The materials of the screen shall be complementary to the materials found on the primary building. c. Delivery, Service, and Loading Areas: Delivery, service, and loading areas shall be completely screened from the public right-of-way and any adjacent residential use. 7.3.10 Lighting of Landscape features a. Accent lights used to call attention to signs or landscape features are permitted provided they meet all of the following conditions: 1. They are comprised of white or clear lights. 2. They do not exceed 25 watts per fixture. 3. They are directed onto the surface of the sign or into the plant material. 4. The bulb is not exposed. 5. They do not spillover beyond the plane of the building 6. They are not moving or animated. 7.4 Parking Landscaping 7.4.1 Parking Lot Screening a. Applicability: All new or expanded parking areas shall be screened from the public right-of-way or primary vehicular access point(s) with vegetation. An opaque screen is intended to exclude all visual contact with the screened feature from an adjacent property, public street, or right-of-way. An opaque screen may be composed of a wall, fence, building, or berm; planted vegetation; existing vegetation; or a combination thereof; as approved by 8/18/23 MRB Draft – RG – Version 5 the Zoning Administrator. Parking lot screening is not required where property or street buffers are retained or required. b. Minimum Height of Screen: Shall include a hedge, dense shrub planting, masonry wall, wood fence, or combination of such features that results in a continuous visual screen along the length of its frontage. Hedges and shrubs may be installed at a height of 2’, as long as the species selected grows to at least 4’ in height within 4 years of installation. 1. Exceptions may be granted by the Zoning Administrator where the parcel has irregular configuration, utility easements or legal constraints which prevent compliance. c. Minimum Length of Screen: The length of a required screen shall be that which is necessary to totally visually screen the feature from protected properties, streets, and rights-of-way as provided in this section. The Zoning Administrator may approve accommodations for reasonable access and use, as necessary. d. Minimum Plantings: Parking lot screens shall comply with the following landscaping standards: 1. A parking lot shall contain at least one overstory tree for every 40 linear feet of street frontage, excluding portions of the frontage where driveways are located and areas necessary to avoid intrusion into clear sight triangles. Existing trees preserved or planted within required buffer may count towards this requirement. 2. Where there are conflicts with other planting regulations, the more stringent regulation shall apply, as determined by the Zoning Administrator. 7.4.2 Parking Area Interior Landscaping a. Applicability: The following shall comply with the standards in this subsection: 1. Any new vehicular surface area (parking lot) whether principal or accessory use containing 10 or more parking spaces; or, 2. Any new, additional, or expanded portion of an existing vehicular surface area which cumulatively would create greater than 10 parking spaces. b. General Standards 1. No parking space shall be further than 60’ linear feet from a large maturing tree. 2. One large maturing tree shall be required at the end of every row of parking. This includes trees located within required landscape islands. 3. Landscaped areas within or adjacent to parking areas must be protected from vehicular damage by a raised curb, wheel stops or approved equivalent barrier of at least six inches in height. 4. Creative landscaping plans that incorporate larger islands or different spacing of landscaped areas than required in this section may be 8/18/23 MRB Draft – RG – Version 5 approved by the Zoning Administrator, as long as the minimum area of landscaping and minimum number of trees is provided. Appeals to this determination are made to the Board of Zoning Appeals for final decision. c. Landscape Islands 1. Landscape islands shall be provided within each row of parking spaces so that the maximum amount of uninterrupted parking spaces is no greater than twelve (12). 2. No more than 12 continuous parking spaces shall be permitted in a row without an interrupting landscaped island, except in the following circumstance: a. The parking lot is gravel, or covered with other soft pervious pavement materials, and spaces are not striped. 3. Landscaped islands with a planting area of at least 12 feet wide by 18 feet long area shall be established parallel to parking spaces and at the end of the parking aisle in order to separate the last space from any adjacent driveways. 4. Islands shall be curbed for traffic control and safety. 5. At least one (1) canopy tree shall be provided within each landscaped peninsula. All landscaped peninsulas and medians shall be landscaped with mulch, sod, shrubs, or ground cover vegetation. If there is a conflict with overhead utilities, two understory trees shall be provided per island. d. Building Exterior Perimeter Plantings 1. Plant material is required along 10 percent of the length of exterior building walls and structures to provide separation between the building and the vehicular surface area. 7.5 Perimeter Buffering Perimeter buffers are intended to provide spatial separation between uses of differing intensities. Where the buffer requirements herein are in conflict, the greater buffer width and/or plantings shall apply. 7.5.1 Purpose of Buffer Requirements a. To minimize the potential negative impact between adjacent land uses and streets, and to promote land use compatibility. b. To preserve and retain existing vegetation within required buffers to preserve natural landscapes and native plant species, unless it conflicts or does not comply with the requirements in the buffer table below. 7.5.2 Applicability a. Where a new use or development is established, or expanded by more than 20 percent, and a buffer is required per Table 7.4.4.1. 8/18/23 MRB Draft – RG – Version 5 1. Where a new use or redevelopment is subject to Section 11.11 Nonconforming Site Features. 7.5.3 General Standards a. The use of evergreen trees and plans are strongly encouraged within required buffer areas. 1. Exception: Canopy trees shall be planted unless factors such as overhead utility lines or buffer size require the planting of smaller trees. Such substitutions must be approved by the Administrator. b. In addition to the tree planting requirements, a minimum of 40 percent of the buffer area shall be planted in a combination of approved shrubs, annuals perennials, live ground cover, or ornamental grasses. c. All areas shall be maintained in a minimum of three inches of mulch or pine straw. Plant materials shall be designed and installed in a manner that provides variability of height at maturity d. Spacing and arrangement of plant material must be primarily based on the mature dimensions of the plants. e. The buffer yard should not result in using more than 35% of the available lot and may be reduced accordingly by the Administrator. f. Fences, walls, and berms, and parking area surfaces & driveways shall be maintained in good condition and appearance at all times by the owner. 7.5.4 Property Buffer Types a. The property buffer widths shall be established for new development based upon the following buffer types (Table 7.4.4.1): 1. Type A: Shall apply when any use is similar to an adjacent use or has only a slight impact on the adjacent use. Type A buffers shall be planted or installed. Use of existing landscaping for credits (Section 7.3.4) to be determined by the Administrator. 2. Type B: Shall apply when any use is somewhat different from an adjacent use or has a moderate impact on adjacent uses. Type B buffers shall be planted or installed. Use of existing landscaping for credits (Section 7.3.4) to be determined by the Administrator. 3. Type C: Shall apply when any use is clearly different from an adjacent use or has a definite impact on adjacent uses. Use of existing landscaping for credits (Section 7.3.4) to be determined by the Administrator. 4. Type D: Shall apply when any use is incompatible with an adjacent use or has a large impact on adjacent uses. Type D buffers shall be planted or installed. Use of existing landscaping for credits (Section 7.3.4) to be determined by the Administrator. 5. Type E: Shall apply when any use is incompatible with or has a severe impact on adjacent uses. Type E buffers shall be planted or installed. Use of existing landscaping for credits (Section 7.3.4) to be determined by the Administrator. 8/18/23 MRB Draft – RG – Version 5 Table 7.4.4.1: Property Buffer Types Low Impact Medium Impact High Impact Type A Type B Type C Type D Type E Minimum Width 5 ft 10 ft 20 ft 50 ft 100 ft Canopy Trees per 100 linear ft. 4 6 8 10 12 Shrubs per 100 linear ft. 12 18 30 40 50 b. Required Buffer Yard Types Using the types of buffers defined in Table 7.4.4.1, property buffers shall be required when the following uses are directly adjacent to each other or a specified zoning district: Table 7.4.4.2: Required Buffer Yard Types Zoning District of proposed develop ment Adjacent Zoning District Vacan t Land RR or RA SR1, SR2, and SR3 TR1 or TR2 TR3 Manufactured Homes or Parks PI TC or VC OC CC or IC LI RR or RA N/A N/ A C C C B C D D D D SR1, SR2, or SR3 B D N/A B C D C B C D E TR1 or TR2 B D B N/A B C B B B E E TR3 B D C B A B B A A D E Manufacture d Homes or Parks B C D C B N/A B D C E E PI B C C B B B N/A A B D D c. Reduction in Buffer Width The required width of a buffer yard may be reduced in accordance with this subsection, provided, only one width reduction is allowed along any length of a transitional buffer yard. 8/18/23 MRB Draft – RG – Version 5 1. Fence or Masonry Wall Included The width of a transitional buffer yard may be reduced by the amount shown in Table 7.4.4.1, if a fence or wall compose that is complimentary to the building in design and materials complies with the following: a. The minimum width may be reduced by 25% if a solid wall or fence, at least six feet in height, is constructed. The fence shall be supplemented with shrubs and Understory trees. b. A 50% width reduction may be granted with the installation of a solid brick wall, masonry wall faced with brick or stucco, or a berm with a minimum height of six (6) feet. 2. Conflicts with Existing Features Where there are conflicts with overhead utilities, easements, topographic features, or other limitation determined by the administrator, one Canopy tree may be replaced by two understory trees. d. Permitted Improvements within Perimeter Buffers Perimeter buffers shall contain only vegetation. The following exceptions may be allowed provided the requirements in Section 7.4.4.2 are met. 1. Pedestrian Coverings: If awnings, colonnades, arcades, or galleries are incorporated into the building design, landscaping may be reduced or eliminated. 2. Vehicular Access Driveways: These may encroach into buffers only if the driveway is placed approximately perpendicular to the buffer, or if the driveway is shared by adjoining parcels. 3. Sidewalks, Bicycle Paths and Bicycle Parking: These may encroach, provided that they shall not count toward meeting the required landscaped area. Encouraged to be placed on the interior of buffers, as to not directly abut roadways. 4. Stormwater Management: Stormwater and drainage facilities that permit vegetation may encroach into the buffers if the planting requirements are fulfilled. 5. Signage, lighting fixtures, and street furniture. 6. Walls, fences, open-air structures, and sculpture. 7. Utility and services lines. 7.5.5 Street Buffers a. Applicability: Street buffers along the public right-of-way shall be required for the following projects: 1. New or redevelopment nonresidential or multi-family or sites requiring a major architectural review or major subdivision approval. 2. Developments requiring major subdivision approval 3. New construction or expansion of a building by more than 20 percent within the Light Industrial (LI) zoning district. 4. Exceptions: Street buffers shall not be required in the Town Center or Village Commercial zoning district. Development of residential dwellings 8/18/23 MRB Draft – RG – Version 5 on individual lots, or developments that are defined as minor subdivisions. In certain cases, the review entity may waive or reduce requirements based on the following criteria: a. Where walkability is encouraged, or visibility is appropriate. b. Where the required buffer would interfere with connectivity between parcels. c. Conflicts with sight distances and other hazards to the public health or safety. d. Commercial visibility for the purposes of attracted vehicular traffic shall not be considered a reason for waiver of buffer requirements. b. Location: All required street buffers shall be no less than six feet in width at any point and average eight feet in width, as measured perpendicularly to the street, along the entire length of the property. c. Tree Planting Requirements: Canopy trees shall be planted unless overhead utility lines or other factors require the use of medium or Understory trees, as approved by the Administrator. Fractions generated by applying the minimum number of plants to the actual linear footage of the buffer shall be rounded up to the nearest whole number. (For example, 125 feet of buffer length would be required to have two large trees or three medium trees or four small trees.) The planting schedule for street buffers shall be as follows: 1. Canopy Trees: 1 per .015 linear foot of frontage. 2. Understory Trees: 1 per .060 linear foot of frontage. d. Other Planting Requirements: a minimum of 30 percent of the buffer area shall be planted in a combination of approved shrubs, perennials, ornamental grasses, live ground cover, or turfgrass. Additional plantings may not be required in significant natural forested areas maintained within the street buffer if so approved by the Administrator. All other areas, including bare ground under trees, shall be covered in a minimum of three inches of mulch. Spacing and arrangement of plant material must be primarily based on the mature dimensions of the plants. e. Berms: Berms shall be allowed to augment required street buffer plantings as long as a minimum of 50 percent of all required trees and plantings shall be planted along the street front portion of the berm. f. Waivers Where an existing easement, legal restraint, or obstruction makes complying with these regulations infeasible, the Administrator is empowered to waive these requirements. The applicant shall demonstrate compliance to the extent practicable and mitigate the lack of screening. 7.5.6 Berms 8/18/23 MRB Draft – RG – Version 5 a. Applicability: Where due to topographical constraints or opportunities berms are a feasible option, the applicant may propose to use berms in coordination with other requirements of this ordinance. If included in the landscape design, berms shall: 1. Not be used for the display of vehicles, merchandise, or storage of any kind; 2. Have a minimum height of eighteen inches, a minimum crown width of two feet, and a side slope with a width to height ratio of no greater than three to one (3:1). No berm shall exceed four feet in height once the soil settles; 3. Be designed and constructed with an undulating appearance which mimics, as much as is practicable, a natural topographical feature of the site; 4. Be substantially planted and covered with live vegetation. No berm shall consist entirely of turf grass, ground cover, mulch or similar material; 5. Be fully installed, planted, stabilized and maintained prior to certification of zoning compliance; and 6. Be designed to prevent standing water or to impede the flow of stormwater from adjacent properties. 7.5.7 Berm Soil The following shall apply to the soil to be using as a planting berm: a. The soil shall be imported topsoil or manufactured topsoil from off-site sources; b. The soil should be obtained from naturally well-drained sites where topsoil occurs at least four inches deep, but shall not be obtained from agricultural land, bogs or marshes; c. Berm soil shall be free of stones of one inch or larger in any dimension; roots, plants, sod, clods, clay lumps, or pockets of course sand; contaminants such as chemicals, construction materials and building debris, fuels, and other extraneous materials harmful to plant growth; and obnoxious weeds and invasive plants, including but not limited to quack grass, Johnson grass, poison ivy, nutsedge, nimblewill, Canada thistle, bindweed, bentgrass, wild garlic, ground ivy, perennial sorrel, and bromegrass; d. The soil shall not be infested with nematodes, grubs, other pests, pest eggs, or other undesirable organisms and disease-causing plant pathogens; and e. Soil for berms shall be friable and with sufficient structure to give good tilth and aeration. Soil shall be within a pH range of 6.2 to 6.8. 7.5.8 Environmentally Sensitive Features a. Lots that are adjacent to or contain one or more protected waterbodies shall incorporate a 50 ft. wide natural buffer along the entire length of the waterbody and shall be calculated from the boundary of the waterbody. 8/18/23 MRB Draft – RG – Version 5 b. Waterbodies include lakes, natural ponds, rivers, streams, and wetlands. c. Within this buffer, there shall be no structures, land disturbance, or vegetation removal. d. Exceptions: 1. Vegetation removal is allowed for the following reasons: a. Removing dead or dying trees b. Removing invasive species c. Providing an access corridor no wider than 15ft. d. Forestry Activity e. Any relief to this section may be petitioned with a variance application to the Board of Zoning Appeals (BZA). 7.6 Tree Protection and Preservation 7.6.1 Purpose and Intent The purpose of this section is to retain and protect significant trees and existing natural vegetation. Additionally, when development projects need to remove existing trees and vegetation, this section lays out ways to mitigate removed trees so that the aesthetic look of the Town may be preserved within the context of natural elements. 7.6.2 Applicability a. The standards in this section apply to all applications for development that involve the removal, retention, protection, and replacement of trees. b. All other projects as defined by Section 7.2.1. 7.6.3 Protected Trees a. Town of Chapin Approved Tree Species List: The Town of Chapin recognizes certain trees, because of their species and size, are an asset to both the Town and individual property owners and are hereby designated as “understory” and “canopy” trees. Such trees shall be defined as those trees which are listed in Town of Chapin’s Tree List. This list shall be used to identify protected trees and as a guide for replanting of trees when applicable. b. Significant Trees: Certain trees are deemed significant trees by the Town of Chapin. Significant trees are any trees from the approved tree species list that have a diameter at breast height (DBH) at or greater than 18”. c. Historic Trees: Certain trees are deemed historic trees by the Town of Chapin. Historic trees are any trees from the approved tree species list, or noninvasive hardwoods that have a circumference of 75 inches or a diameter at breast height (DBH) at or greater than 24”. Historic trees shall not be removed, unless a credentialed arborist provides a report, finding the criteria for tree removal in Section 7.4.4.2. has been met, and that there is no reasonable means of preserving or saving the tree. Historic Trees that are removed shall be subject to mitigation, replacement, or tree coverage requirements. 8/18/23 MRB Draft – RG – Version 5 d. Iconic Trees: Certain trees are deemed iconic by the Town of Chapin. Iconic trees are any trees that have been identified by the Planning Commission or Town Council as Iconic due to their location, relation to historic events and/or property, overwhelming beauty and/or uniqueness, prominence in the visual beauty in the Town of Chapin, dedication to an individual(s) or event, or represent significant investment by the Town. A tree may be deemed iconic regardless of age, size, and/or species. While living, Iconic Trees may not be removed or replaced without the express permission of the Planning Commission. In the event that an Iconic tree is removed, replaced, damaged, or otherwise impacted, the Planning Commission shall determine the new location of the replacement iconic tree. The Town shall maintain a list of Iconic Trees in the Town of Chapin. 7.6.4 Tree Coverage Requirements Applicability: In addition to the standards laid out within this Article, land or property shall maintain a minimum baseline canopy coverage area based on the zoning district and lot size. This canopy can be comprised of existing trees, new trees, or a combination of both, and shall be per the table below: ZONING DISTRICT Minimum Number of Trees Required 1 Overstory Tree Required Agricultural (RR and RA) N/A Suburban (SR1 and SR2 Per 4,000 sq. ft. of lot size Suburban Residential 3 (SR3) Per 6,000 sq. of lot size Town (TR1, TR2, and TR3) Per 6,000 sq. ft. of lot size Town Center N/A Village Commercial N/A Commercial (CC, IC, and OC) Per 6,000 sq. ft. of lot size Institutional (PI) Per 4,000 sq. ft. of lot size Light Industrial N/A 7.6.5 Unlawful to Remove, Cut, or Damage Protected Trees a. Unless authorized by the terms of this section or approved by the Administrator during site plan review, no person shall cut down, remove, irreparably or irreversibly damage or destroy any protected or tree with a diameter at breast height (DBH) greater than 8” . b. Forestry Activity Exempt 1. Pursuant to the provisions of the South Carolina Forestry Management Act Section 48-23-205, forestry activities are permitted on all forestland parcels that is: a. Taxed on the basis of its present value as forestland under S.C. Code of Laws Section 12-43-220(d); or b. Managed in accordance with a forest management plan; or c. Certified under the Sustainable Forestry Initiative, the Forest Stewardship Council, the American Forest Foundations Tree Farm 8/18/23 MRB Draft – RG – Version 5 System, or any other nationally recognized forest certification system; or d. Subject to a legally binding conservation easement under which the owner limits the right to develop or subdivide the land; or e. Managed and harvested in accordance with the best management practices established by the State Forestry Commission pursuant to S.C. Code of Laws Section 48-36-30. c. Time Restrictions d. In the event that the Administrator determines that any Forestry Activity on Forestland, that is otherwise permitted pursuant to subsection 7.4.5.2. above, has resulted in a change in the land from Forestland to non-forest or nonagricultural use, the Administrator may deny zoning permit: 1. One year after the completion of a timber harvest if the activity results in the removal of all or substantially all of the trees from the parcel. 2. Five years after the completion of a timber harvest if the harvest results in the removal of all or substantially all of the trees from the parcel and the harvest was a willful violation of Town regulations. 3. Conflicts with applicable ordinances of Lexington County. 7.6.6 Tree Removal Permit a. Permit Required A Zoning Permit shall be required for the removal of any tree on the Town of Chapin’s Approved Tree Species List exceeding 8” DBH (Diameter at Breast Height) or protected trees as described in Section 7.4.3. b. Acceptable Reasons for Tree Removal 1. Removal of historic and significant trees described in Section 7.4.3, shall be only be permitted when the applicant submits an arborist report with a zoning permit application detailing the following findings: a. The tree is dead. b. The tree is affected by a pest or disease problem will result in rapidly declining tree health and a hazardous condition to other trees or safety. c. The tree is in irreversible decline due to mechanical damage, poor maintenance or environmental stresses or a combination thereof and its condition cannot be improved with ANSI (Section 7.3.3.6) maintenance techniques. d. The tree has an uncorrectable structural defect that results in an increased risk of whole or partial tree failure. e. The tree is in an existing or proposed restricted growth space resulting in conflict with the surrounding hardscape or infrastructure and the conflict cannot be resolved. 8/18/23 MRB Draft – RG – Version 5 f. The tree is in conflict with overhead utility lines and proper pruning cannot adequately reduce the conflict without severely disfiguring the tree or will result in crown reduction encompassing more than 50 percent of the normal crown. Applicant to demonstrate the impossibility of other options that do not include tree removal. g. The tree is in conflict with proposed site reconfiguration/improvements or above/below ground utility upgrades and the conflict cannot be resolved or the correction of the problem will result in severe disfigurement of the tree or severe root damage which compromises structural stability or will result in crown reduction encompassing more than 50 percent of the normal crown. 2. When all other trees on the Town of Chapin’s Approved Tree Species List with a DBH between 8”<18” the Administrator shall approve the zoning permit if one of the following factors is determined: a. Health: Whether or not the tree is in good health. b. Access: Whether or not the tree is a hazard to pedestrian, bicycle, or vehicular traffic. c. Structural Interference: Whether or not the tree presents a hazard to buildings, structures, or utility lines. d. Safety: Whether the tree poses an immediate threat to health and safety of people or adjacent structures. e. Development: Whether or not the tree constrains reasonable development of the specific site, considering lot size, applicable setbacks, context, building type and use, stormwater requirements and other relevant site development considerations. c. Tree Mitigation 1. Applicability: Mitigation and replacement for trees is not required for properties zoned RR, RA, SR1, SR2, SR3, TR1, TR2, and LI, unless the project falls under the “applicability” standards in Section 7.2.1. All properties shall be subject to the Tree Coverage Requirements in Section 7.4.4.1. 2. Required Submittal: A tree removal and replacement plan, including the location, genus and size (DBH) of the tree to be removed; and the species and proposed locations and caliper at the time of planting of replacement trees, must be approved by the Administrator prior to site plan approval. 3. Installation of Replacement or Mitigated Trees: All trees removed in conjunction with approved tree removal permit shall be replaced within 90 days after removal. Exceptions to this timeline may be approved by the Administrator after determining that construction activities or weather conditions warrant an extension. All trees shall be appropriately planted at the specified caliper (Section 7.3.1.7) and spaced appropriately from buildings, paved areas, and other vegetation. 8/18/23 MRB Draft – RG – Version 5 4. Credits Toward Mitigation: Trees with a DBH over 18” that are preserved on the property and that are found on the Town of Chapin Tree List, shall count towards mitigation. The type, size, and species of trees to be saved shall be included on the site plan. 5. Mitigation Schedule: Replacement trees of the same or similar species as the tree to be removed shall be planted as required in the tree replacement schedule in the table below. If tree replacement on the property is not possible because unique site conditions, safety concerns, and/or limitations of reasonable use of the property, the applicant may pay a fee to the Town in lieu of replacing trees per the schedule below: Table 7.4.7.3.5: Replacement and Mitigation Schedule Tree Type Replacement: % of caliper inches Mitigation: Cost/Caliper Inch Understory Tree 25% $10/inch Canopy Tree 33% $50/inch Significant 50%* $50/inch* Historic Tree 50%* $100/inch* Iconic (See Section 7.5.3.4) (See Section 7.5.3.4) EXAMPLES: APPROVED REPLACEMENT APPROVED MITIGATION Historic Tree: A 24-inch Live Oak tree is approved to be removed. The applicant may choose to plant back (4) 3-inch Live Oaks (12”) to equal 50% of the tree to be removed Historic Tree: A 24-inch (DBH) Live Oak tree is approved to be removed. The applicant must pay $2,400 for the removal of the tree (24” x $100 = $2,400) Canopy Tree: A 12-inch Live Oak tree is approved to be removed. The applicant may choose to plant back (1) 4-inch live oak to equal 33% of the tree to be removed. Canopy Tree: A 12-inch tree is approved to be removed. The applicant must pay $600 for the removal of the tree (12” x $50 = $600) *Replacement location of historic or significant trees removed shall be decided by the administrator or applicable review entity. 6. Violations: Any tree removed without a permit shall be required to pay double the mitigation costs found in the above table. d. Exemptions No permit is required for the following actions: 8/18/23 MRB Draft – RG – Version 5 1. Removal of Hazardous Trees: In the event that a tree poses an imminent threat to public safety or property, such as a result of a catastrophic event, the Administrator may waive the requirements of this section. Written and photographic documentation must later be submitted to the Administrator, describing the threat which initiated the removal. The Administrator may require replacement of any trees which are removed where it is determined that the threat resulted from negligence. 2. Forestry Activities: Subject to the South Carolina Forestry Management Act Section 48-23-205, forestry activities on all forestland parcels shall be exempt from Tree Removal Permitting. 3. No Mitigation Required: Mitigation is not required for laurel oaks, sweet gum, pecan trees, or pine trees not on the Town of Chapin’s Tree List. e. Palm and Palmetto Trees The following requirements are specific to palm trees or palmetto plants. 1. The palm or palmetto tree(s) shall be of the following species: Common Name Botanical Name Needle palm Rhapidophyllum hystrix Dwarf or Bush Palmetto Sabal minor Cabbage Palm or Palmetto Sabal palmetto Saw Palmetto or Scrub Palm Serenoa repens 2. Palmetto Trees or Palms are subject to the following conditions: a. Palm or palmetto tress are only permitted at the entrance of a principal building, adjacent to a landscaped property entrance or sign, or part of a landscaped area featuring a flagpole(s). b. Only one palm or palmetto tree may be located at an entrance of the principal building, adjacent to a landscaped property entrance or sign, or part of a landscaped area featuring a flagpole(s), unless otherwise permitted by the Architectural Review Board for the purposes of; balance or consistency with existing vegetation. c. Any palm or palmetto tree shall be planted at the surface and properly supported per ANSI300 standards. 3. No palm or palmetto tree may be used as a shade tree, street tree, or as part of a buffer or landscaping requirement. 7.6.7 Tree Protection Zone (TPZ) Before and during any land disturbance, construction or development, the following measures shall be utilized to protect canopy and understory trees, including tree crowns and roots, designated for retention per the site plan as approved by the Administrator. The location of the TPZ fencing and method of construction shall be noted on the site plan. 8/18/23 MRB Draft – RG – Version 5 a. Prior to clearing/grading/land disturbance, construction, and/or development of a property, the owner shall install all tree and root protection necessary to protect identified canopy and understory trees from damage. b. All canopy and understory trees shall be protected with a sturdy and visible fence before any land disturbance begins. At a minimum, such Tree Protection Zone (TPZ) shall be established and be equal to a one-foot radius on the ground for every inch of Diameter at Breast Height (DBH) or the extent of the drip line of each canopy and understory tree to be protected, whichever is greater. c. Tree protection fencing shall be installed and remain in place and in good condition until all clearing/grading/land disturbance, development and construction activities are completed. d. The TPZ fencing shall be constructed from any material visible and substantial enough to prohibit and keep out vehicles, people, and all other activities associated with the clearing/grading/land disturbance, development and construction process, as approved by the Administrator. Examples include wood posts and rails, chain link fencing, wire fencing and posts, and other substantial materials. Tree protection fencing shall be a minimum of four feet high. e. All Tree Protection Zones shall be designated as such with signs posted visibly on all sides of the fenced protection area, with lettering and colors that provide maximum readability in terms of distance and contrast. f. No soil disturbance or compaction, stock piling of soil or other construction, paving or landscaping materials, vehicular traffic, or storage of heavy equipment is allowed in the tree protection zones of trees to be retained. g. In situations where strict adherence to the provision of tree protection zones is not possible due to factors including, but not limited to, site conditions, overlapping tree protection zones, or grade changes, the Administrator may, through field determination and consultation, allow modifications to the required tree protection zone based on accepted best practices and procedures. RG MRB GROUP - Version 5 – 8/17.23 Article 8 – Off-Street Parking Standards 8. Off-Street Parking Standards 8.1. Purpose and Intent Parking lots and similar facilities are necessary elements in the urban environment. However, the provision of parking facilities must be regulated to avoid negative impacts such as increased stormwater volumes, heat islands, reduced traffic efficiency, interruption of a vibrant streetscape and other recognized externalities of parking lots. The purpose of this section is to ensure the adequate provision of parking in Chapin without degrading the built or natural environment, and to provide clear regulations regarding the location, sizing, and screening of off-street parking facilities. It is intended that these standards will ensure the development of parking in a manner consistent with the desired character and development patterns of the community. 8.2. Applicability 8.2.1. New Development All new development shall provide off-street parking and loading areas in accordance with the standards of this Section 8.2.2. Existing Development a. Change in Use Additional off-street parking or loading facilities are not required when a building’s use changes from one conforming use to another conforming nor when a non-conforming use is converted to a conforming use. 8.2.3. Building Expansion This section applies to existing structures that are expanded or enlarged in terms of the number of dwelling units, more than 20% of its floor area, or is otherwise significantly improved as defined by Article 11. Any additional off- street parking and loading spaces that may be required due to the improvement shall be provided in accordance with the requirements of this Section, and applied only to the expanded or enlarged part of the structure. 8.2.4. Historic Buildings A designated building on the National Register of Historic Places, recorded with the State SCDAH or NPS that undergoes expansions under 20% of the number of dwelling units, floor area, or other work requiring Architectural Review or Zoning Permit shall not require additional off-street parking or loading facilities. 8.2.5. Timing of Review Review for compliance with the standards of this Article shall occur during review of a development application in accordance with Article 10 Development Review Procedures. RG MRB GROUP - Version 5 – 8/17.23 8.2.6. Parking Plan Required All development applications subject to review for compliance with the standards of this Article shall include a parking plan which shall accurately convey compliance with this section. 8.3. General Standards 8.3.1. Use of Parking Off-street parking areas required by this Section shall be used solely for the parking of licensed motorized vehicles in operating condition. Required parking spaces shall not be used for the sale, lease, storage, dismantling, or service of any vehicles, boats, motor homes, campers, mobile homes, building materials, equipment, or supplies except for farmer’s markets and food trucks on a temporary basis. 8.3.2. Identified as to Purpose Off-street parking areas shall include painted lines, w

Text truncated. Open the original for the full document.

Source: Town of Chapin website. First collected Oct 14, 2026.