June UDO Committee meeting and supporting documents
Town of Chapin · Lexington County · meeting of Jun 15, 2023 · Agendas
Open the original document More from Town of Chapin
Text
Extracted automatically from the original. Tables and formatting may not survive; the original document is authoritative.
CHAPIN UNIFIED ZONING & DEVELOPMENT ORDINANCE
STEERING COMMITTEE MEETING
Town Hall
June 15, 2023
2:00 P.M.
AGENDA
Call to order
Freedom of Information Act Compliance
Approval of Minutes
1. May 18, 2023 Meeting Minutes
New Business
2. Draft Reviews
a. Article 9: Signs
b. Article 3: Zoning Districts and Boundaries, Zoning Map
Adjourn
TOWN OF CHAPIN
UNIFIED DEVELOPMENT ORDINANCE COMMITTEE
MEETING MINUTES
Thursday May 18, 2023 Town Hall
2:00 P.M.
Members Present: Planning Commission Members Rae Davis, Caleb Pozsik, Yvonne Hudson (arrived at 2:32
p.m.)
Members Absent: Clay Cannon
Staff Present: Planning and Zoning Manager Kevin Singletary (via Zoom), Town Clerk Shannon Bowers
Staff Absent: Town Administrator Nicholle Burroughs, Mayor Al Koon
Guests: Riccardo Giani - MRB Group (via Zoom)
Call to Order: Chair Davis called the meeting to order at 2:05 p.m. and acknowledged the appropriate
notifications in compliance with the SC Freedom of Information Act had been met.
Approval of Minutes
Member Pozsik moved to accept the April 20, 2023 meeting minutes as presented. Member L. Cannon
seconded the motion. No further discussion was held, motion to approve passed unanimously.
Chair Rae Davis: Yes
Member Laura Cannon: Yes
Vice Chair Caleb Pozsik: Yes
New Business
Draft Review – Article 7: Landscaping, Buffer, & Tree Preservation: The Unified Zoning and
Development Ordinance (UDO) Committee reviewed the article. Members submitted any changes/comments
to Mr. Singletary to include in the discussions. They briefly reviewed each section in Article 7 and Mr. Gianni
supplied information on classification of the different types of protected trees that he and Mr. Singletary
discussed. Those classifications were: Approved trees list, historic trees, significant trees, and iconic trees. Mr.
Singletary stated he would like to include a definition for iconic trees. These trees would be identified by the
Planning Commission (PC) and the removal of said trees would need to have expressed permission from the PC
to remove and the town would maintain that list. Mr. Singletary noted that he included restrictive mitigation
language to this section, but noted that it may be more appropriate in another section.
Sections 7.1 and 7.2: Most edits to these sections were grammatical in nature or format related. The
committee agreed that the opening paragraph for 7.1 needed to be written in a way to accurately reflect the
intent of the article. The committee also discussed landscaping to be including in new lots as they develop as
well as existing lots and landscaping for parking lots. The committee expressed its desire to further define the
tree survey and associated requirements.
Section 7.3: The UDO committee discussed general landscape standards, species of trees and plants that are
compatible with the area, buffers in regards to perimeters street buffers, berms, and environmental features,
criteria for tree removals, and removal standards for significant/historical trees.
Unified Development Ordinance Committee May 18, 2023
Vice Chair Pozsik moved to recess. Member L. Cannon seconded. The UDO committee recessed at 3:52 p.m.
Chair Davis resumed the meeting at 3.:59 p.m.
Section 7.4: Most edits in this section were grammatical in nature or format related. The UDO Committee
continued to discuss tree mitigation. The committee expressed concerns over preventing clear cutting, but
decided that more research would be needed to determine a proper fee schedule and tree replacements. Mr.
Singletary noted that the most important aspect of the mitigation section is the replacement of trees that have
been removed, and finding the right balance in the mitigation fee schedule.
Mr. Singletary noted that UDO Committee will be reviewing articles 8 and 9 at the next committee meeting.
He will provide an updated draft copy of the UDO for members to have on hand. He stated that the group will
likely have a called UDO meeting in lieu of the regular PC meeting, which will be on June 6 at 3:00 p.m.
Adjournment: Member Hudson moved to adjourn the meeting. Member L. Cannon seconded the motion.
Meeting was adjourned at 4:21 p.m.
UDO COMMITTEE APPROVED (Date):
Rae Davis, PC Chair
ATTEST:
Shannon Bowers, Town Clerk
MRB Group – RG Revision 5.23.23 – Version 2
Article 9 – Signs
9. Signs
9.1. Purpose and Intent
The purpose of the regulations, here in, is to establish requirements for the placement,
installation, and maintenance of business and/or advertising signage, and to aid in the
preservation, protection, health, welfare, safety, and general well-being of the
Community and its Citizens..
This Ordinance will promote, authorize and enforce the use of on-premises signage
which are, but not limited to:
• Compatible with their surroundings;
• Appropriate for the type of activity to which they pertain;
• Tastefully expressive of the identity of the owner, occupant, and/or individual
proprietors or of the community as a whole;
• Designed to convey a desired message and/or image regarding the Owner,
Occupant, or individual prporitetor of a specific property, while protecting the
aesthetic and attractive qualities of the community;
• Minimize interference, obstruction, distraction, and/or unsafe conditions to the
motoring public; and,
• Conserve the value of the subject property and encourage the most appropriate
use of land throughout the municipality.
9.2. Applicability
Except as otherwise noted, the regulations of this article shall apply to all zoning
districts, and a zoning permit shall be required for the erection, placement, alteration,
or reconstruction of any sign.
9.3. General Provisions
9.3.1. Placement
Signs shall not be posted, placed, or erected within any public rights-of-way or
on any fixed or immovable object, such as, trees or utility poles, except as
specifically permitted or where encroachments have been specifically permitted
within or by this article.
9.3.2. Materials
Sign structures shall be constructed of durable, weather-resistant materials such
as treated lumber, concrete, metal, brick, or other similar substitute or
composite materials as determined by the Administrator. Unfinished wood,
cardboard, polystyrene foam, and similar materials are not permitted.
9.3.3. Design
The design, color, location, and illumination of signage shall be compatible and
complimentary of the overall design of the development and surrounding
parcels.
MRB Group – RG Revision 5.23.23 – Version 2
9.3.4. Sign Illumination
9.3.4.1. Internal Illumination: The background of internally illuminated cabinet
signs shall be completely opaque. This provision does not apply to
internally illuminated channel letters. Internally illuminated signs shall
be fully encapsulated and shall not allow the light intensity or brightness
of the sign to interfere with the safe vision of motorists or bicyclists.
LED lighting is prohibited within the Town Center (TC) zoning district.
9.3.4.2. Shielding: Unless otherwise expressly prohibited, signs may be
externally illuminated provided that lighting used illuminates the
surface area of the sign only, and is shaded, shielded, or directed so that
the light intensity or brightness does not interfere with the safe vision of
motorists or bicyclists. Around external lighting, landscaping shall be
designed to conceal the base of the light fixture to the extent feasible.
9.3.4.3. Transition of Electric Signs: Electric letter signs, (LED, & such), must
maintain message 6 seconds before changing, and cannot blink, scroll,
rotate, change height or intensity. Such signs electrical connections
must be inspected by Lexington County and a Zoning Permit must be
obtained.
9.3.4.4. Proximity to Residential Districts: No commercial sign within 100 linear
feet of a pre-existing residential structure may be illuminated between
the hours of 12:00 midnight and 6:00 a.m. A residence shall be deemed
"pre-existing" for purposes of this Section if it has a valid building permit
in effect for construction of said structure or if construction of said
structure was complete on or prior to the effective date of this
provision. This does not included residences in mixed use buildings in
the Town Center, Village Commercial, nor does it include multi-family
buildings.
9.3.5. Computation of Sign Area
The area of a sign shall be the area of the sign face formed by a perimeter
consisting of a series of straight lines enclosing all parts of the sign. Signs that
are composed of individual symbols, letters, figures, illustrations, message,
forms, or panels, the sign area shall be considered to include all lettering,
wording, and accompanying designs and symbols. Sign area shall also include
any background material, panel, trim, color, and direct or self-illumination used
that differentiates the sign from the building, structure, backdrop surface, or
object upon which or against which it is placed. The sign structure shall not be
included as a portion of the sign face, provided that no message, symbol, or any
of the aforementioned sign face criteria are displayed on, or designed as part of,
the sign structure.
9.3.6. Computation of Sign Height
MRB Group – RG Revision 5.23.23 – Version 2
Height shall be measured from the edge of the adjoining sidewalk, street, or the
natural grade to the highest point on the sign. Architectural elements related to
the support structure may extend up to 1 foot over the permitted height.
9.3.7. Construction
Signs shall be permanently attached or affixed to the ground, building, or other
structure by direct attachment to a rigid wall, frame, or supporting structure.
Portable and/or temporary signs. With the exception of portable and temporary
signs as permitted in this article, signs shall be permanently attached to the
ground, a building, or another structure by direct attachment to a rigid wall,
frame, or structure.
9.3.8. Maintenance Requirements
All signs and all components thereof, including supports, braces, anchors, etc.,
shall be kept in a good state of repair, in compliance with all building and
electrical codes, and in conformance with the requirements of these sign
regulations. Any sign which is determined by the Zoning Administrator as being
insecure, in danger of falling or otherwise endangering the public safety shall be
immediately removed by its owner unless it is repaired and made to otherwise
comply with the requirements of these sign regulations.
9.3.9. District Classifications
9.3.9.1. Where this sections references “residential” uses or districts, it shall
mean the following: Rural Agricultural (RA), Rural Residential (RR),
Suburban Family Residential (SFR1), Suburban Family Residential (SFR2),
Suburban Family Residential (SFR3), Town Residential 1 (TR1), and Town
Residential 2 (TR2).
9.3.9.2. Where this sections references “commercial” uses or districts, it shall
mean the following: Village Commercial (VC), Town Center (TC), Public
and Institutional (PI), Corridor Commercial (CC), Interstate Commercial
(IC), Office Commercial (OC), and Light Industrial (LI).
9.3.10. Number of Signs Allowed
Unless otherwise regulated, each parcel is allowed one (1) free-standing sign,
and one of each attached sign.
9.4. Freestanding Signs
9.4.1. Applicability
9.4.2. The following chart applies to all types of development as stated except for
individual single-family or 2-3 unit building lots, or subdivisions containing fewer
than 30 units.
Sign Type Zoning
District
Max
Area
Max
Height
Min
Height
Additional
Requirements/Description
MRB Group – RG Revision 5.23.23 – Version 2
1. Monument Signs
All
commercial
and multi-
family,
except TC;
32 sq. ft. 10 ft. 3 ft. A sign that is mounted on a
foundation and accompanied
by landscaping.
a. Maximum number: 1 per
street frontage. A second is
allowed if spaced more than
300 linear feet away and
reduced by 50%.
b. Landscaping, not including
grass, shall be required for
all monument signs. Such
landscaping shall equal the
total surface area of the sign
face.
c. Foundation of monument
signs shall be of stucco
coated CMU, brick, or other
similar material.
Industrial or
Office Uses
48 sq. ft. 10 ft. 3 ft.
2. Post and Arm Sign
All
commercial
10 sq. ft. 6 ft. 3 ft. A sign supported by a single
post
3. Sandwich Board Signs
TC, VC A portable sign shaped like an
A-frame with a sign panel on
one or both sides, where the
sign panel is integral to the
structure of the sign
4. Easel Sign
All
commercial
A sign or message board
displayed on a portable, open
frame, such as a tripod
MRB Group – RG Revision 5.23.23 – Version 2
5. Pole Mounted Signs
Interstate
Commercial
1 sq. ft.
per 1’ ft
of linear
frontage,
may not
exceed
100 sq.
ft.
30’ 10’ A sign mounted on a single
pole.
a. Sign thickness not to
exceed 2’
9.5. Attached Signs
9.5.1. Applicability
9.5.2. The following chart applies to all types of developments as stated except for
individual single-family or 2-3 unit building lots, or subdivisions containing fewer
than 30 units
Sign Type Permitted
Location
Max Area Additional Requirements/Description
1. Wall
All
commercial
and multi-
family
10% of area of primary
building frontage of
the first floor.
A sign mounted parallel to or painted
on a building facade or other vertical
building surface.
a. Maximum Number – 1 per street
frontage. Signs on secondary
frontages may be ½ the size of the
primary sign.
b. No sign shall extend above the roof
line
c. No sign shall project from the
façade more than 18”
d. Not permitted for residential uses,
other than multi-family buildings
exceeding 10 units
2. Canopy/Awning
All
commercial
and multi-
family
50% of canopy valance
area
a. Maximum Number:1 per building
frontage or tenant space, per
street frontage
b. Must allow 8 feet clearance
above sidewalk
c. Shall not be placed above 2nd
floor window sill or cornice of
building, whichever is higher
d. May encroach over sidewalk area
no closer than 18 inches from
curb
e. Only the valance area of the
awning/canopy may be used as a
message area. The valance shall be
a maximum of 1fttall with lettering
a maximum of9inches tall. The
valance shall be made of the same
material and shall be the same color
as the awning/canopy.
MRB Group – RG Revision 5.23.23 – Version 2
3. Window/Door
All
commercial
and multi-
family
25% of transparent
areas of windows or
doors
Applied plastic or vinyl cut letters are
prohibited.
No permit is necessary for temporary
promotional signs posted on the
interior side of the glass; these signs
shall count toward the 25% maximum
window coverage.
4. Projecting/Suspended
All
commercial
and multi-
family
8 square feet 1. Maximum Number:1 per building
frontage or tenant space, per
street frontage
2. Must allow 8 feet clearance
above sidewalk
3. May project no more than 4 feet
from building face and no closer
than 18 inches from curb
4. Not permitted for residences
with3 or fewer dwelling units
5. Projecting signs shall not be
higher than the fascia and/or
cornice and shall not extend
above the eave line.
6. For multi-story buildings, sign
brackets shall be mounted no
higher than the sill of the second-
floor window.
*The total area of all attached signs for a business shall be no more than 1.5 times the linear frontage of the building, or in
the case of multi-tenant buildings, than the individual tenant space.
9.6. Other Signs that Require a Zoning Permit
9.6.1. Tenant Directory Signs
9.6.1.1. Applicability: Tenant directory signs listing only the name and address of
the business shall be permitted in multi-building, multi-tenant
professional, office, and/or business centers
9.6.1.2. Maximum Area: 32 square feet in surface area shall be permitted per
street frontage
9.6.1.3. Maximum Height: 10 feet
9.6.1.4. Maximum Number: 1 per lot — lots with more than 1,000 feet of street
frontage and more than one Department of Transportation-approved
driveway or street entrance shall be permitted an additional directory
sign on the condition that such driveways are spaced at least 1,000 feet
apart.
9.6.1.5. Location: Tenant directory signs shall be located within the buildable
area and outside of any required buffer. The tenant directory sign must
be located at least 25 feet from any adjacent right-of-way.
9.6.2. Multi-Tenant Free-Standing Signs
MRB Group – RG Revision 5.23.23 – Version 2
9.6.2.1. Applicability: Multi-Tenant signs are required for multi-building
developments with 5 or more occupiable spaces.
9.6.2.2. Design: The design, material, color, location, and illumination of signage
shall be compatible with the overall design of the development. Multi-
tenant signs shall follow the same regulations as monument signs with
regard to landscaped areas around the foundation of the sign.
9.6.2.3. Size: The size of a multi-tenant size shall not exceed 125 sq. ft. If there
are more than 10 occupiable spaces on one parcel, a 125% increase in
sign area is permitted.
9.6.2.4. Height: The height of such signs shall not exceed 10’.
9.6.2.5. Number Allowed: Only one multi-tenant sign is allowed per
development. No individual tenant free-standing signs are permitted. A
second multi-tenant sign, equaling 50% of the total size of the first, may
be permitted if the property if the following is true:
9.6.2.5.1. The individual street frontage is greater than 500 feet.
9.6.2.5.2. The property is located on a corner or intersection.
9.6.2.5.3. The second sign shall be composed of the same
materials and design as the first.
9.6.3. Residential Neighborhood Identification Signs
9.6.3.1. Applicability: Residential neighborhoods with 10 or more lots.
9.6.3.2. Number Allowed: One per entrance
9.6.3.3. Max Area: 32 square feet
9.6.3.4. Max Height: 8 feet
9.6.4. Directional Signs
9.6.4.1. Applicability: A directional sign has a directional message in symbols or
words and may be a private, unofficial traffic signs, designate private
parking, or be place at a site entrance to warn the public against
trespassing. It may also contain the name of a business on the site,
and/or its address.
9.6.4.2. Permitted Location: All commercial districts
9.6.4.3. Maximum Number: 1 per entrance
9.6.4.4. Maximum Area: 2 square feet
9.6.4.5. Maximum Height: 2.5 Feet; Parking stall signs are allowed to be 5’ in
height
9.6.4.6. Off-Premise Signs: Directional signs that are off-premise are not
permitted.
9.7. Temporary Signs
9.7.1. Types of Temporary Signs
9.7.1.1. Promotional Banners
9.7.1.1.1. Maximum Number: 1 per tenant
MRB Group – RG Revision 5.23.23 – Version 2
9.7.1.1.2. Maximum Area: 30 square feet, with a vertical dimension no
greater than 3 feet.
9.7.1.1.3. Minimum Height: Must be placed a minimum of 7 feet above
sidewalk grade
9.7.1.1.4. Location: Attached to building (must be secured along all 4
sides of banner)
9.7.1.1.5. Time Period: Maximum of 30 days
9.7.1.1.6. Additional Requirements: Application for a permit for
promotional banners may be made only 4 times during any
calendar year with no permits being approved consecutively.
A minimum of 30 days shall expire before an application for a
permit for a promotional banner can be accepted.
9.7.1.2. Construction Signs:
9.7.1.2.1. Maximum Number: 1 per street frontage
9.7.1.2.2. Maximum Area: 32 square feet
9.7.1.2.3. Maximum Height: 6 feet
9.7.1.2.4. Location: Minimum of 10 feet from the street right of way.
9.7.1.2.5. Time Period: The sign permit shall be valid for the duration of
the construction period.
9.7.1.3. Grand Opening Signs
9.7.1.3.1. Location: A minimum of 3 feet from the right-of-way; 18
inches from the right-of-way in the Historic District.
9.7.1.3.2. Maximum Number: Up to 3 types of signs are permitted for
grand openings.
9.7.1.3.3. Type: Free-standing and attached signs are permitted at the
discretion of the administrator.
9.7.1.3.4. Time Period: A maximum of 30 days.
9.7.1.3.5. Special Event Signs: Governmental, nonprofit, school, church
or civic club-sponsored signs related to special events shall
meet the following standards:
9.7.1.3.5.1. Signs shall be permitted 14 days prior to a
function and shall be removed within 3 days after
the function.
9.7.1.3.5.2. Signs shall be located on private property.
9.7.2. Exempt Signs
9.7.2.1. No zoning permit is required within the following section:
9.7.2.1.1. Government Signs including signs required by any law, order
or governmental regulation.
9.7.2.1.2. Property Address Signs
9.7.2.1.3. Private Residence Signs
MRB Group – RG Revision 5.23.23 – Version 2
9.7.2.1.3.1. One personal identification sign not exceeding 2
square feet in area
9.7.2.1.3.2. One non-illuminated "For Sale" or "For Rent" sign
not exceeding 6 square feet in area.
9.7.2.1.4. Historical markers, historical monuments or signs as
recognized by local, state, or federal authorities.
9.7.2.1.5. Signs denoting the location of underground utilities
9.7.2.1.6. Holiday decorations
9.7.2.1.7. Signs on interior windows that are not permanently affixed to
the glass and do not exceed 25% of the gross glass area.
9.7.2.1.8. Temporary special event signs and banners for religious,
charitable, civic, fraternal, or similar non-profit or not-for-
profit organizations provided that:
9.7.2.1.8.1. Signs shall be erected no sooner than thirty (30)
days prior and removed no later than five (5) days
after the event;
9.7.2.1.8.2. No such sign shall exceed thirty-two (32) square
feet;
9.7.2.1.8.3. No such sign shall be illuminated; and
9.7.2.1.8.4. All such signs shall be located off the street right-
of-way, unless otherwise granted permission for
such location by the Town of Chapin or SCDOT. In
no case may any such sign impede the view or
travel of any motorists or pedestrians or be
attached to any structure within the right-of-way
(government signs, telephone poles, etc.)
9.7.2.1.9. "Warning", "No Trespassing" and similar informational signs.
9.7.2.1.10. Permanent municipal, school, recreational and civic club
sponsored signs, schedule of events, rules and regulations
signs. Such signs shall not include identification signs.
9.7.2.1.11. Any sign inside a building and not intended to be viewed
from the exterior.
9.7.2.1.12. On residentially zoned lots, one unlighted freestanding sign
not more than three (3) square feet in area and not more
than 4 feet in height from the ground to the top of the sign.
The sign may be used to advertise a home occupation,
garage sale, temporary construction or as a “for sale/rent”
sign, etc. The sign shall not advertise any commercial
enterprise not conducted on the same zone lot.
9.7.2.1.13. Memorial signs, plaques or grave markers which are
noncommercial in nature.
9.7.2.1.14. Flags, pennants, insignia, or religious symbols of any
government, non-profit or not-for- profit organization when
MRB Group – RG Revision 5.23.23 – Version 2
not displayed in connection with a commercial promotion or
as an advertising device.
9.7.2.1.15. Real Estate Signs advertising sale or lease of the premises
subject to the following standards:
9.7.2.1.15.1. One on-site sign per 1,000 ft of street frontage
is permitted. The maximum size shall be 6
square feet, and the maximum height shall be
4.5 feet. For Light Industrial (LI) and Office
Commercial (OC), the size may be increased to
20 sq. ft. with a height not to exceed 6’
9.7.2.1.15.2. The signs shall be removed once the property is
occupied by the new tenant, or when the
property is sold by transfer of title to the same
9.7.2.1.15.3. Special event signs such as for open houses,
agent tours or events, grand openings, and
similar, shall abide by the same rules as
described in 9.8.8 addressing the use of
Temporary signage.
9.7.2.2. Political Signs
9.7.2.2.1. Each sign shall not exceed ten (10) square feet in area in
residential districts and thirty-six (36) square feet in
commercial and manufacturing districts;
9.7.2.2.2. No sign shall be placed in any right-of-way, on any telephone
pole or street sign, trees, or on any public property; and
9.7.2.2.3. Signs are permitted to be erected within sixty (60) days prior
to an election and must be removed within 7 days after an
election.
9.7.3. Prohibited Signs
The following signs are prohibited:
9.7.3.1. Off-premise signs, with the exception of flags of a sovereign nation, and
banners erected by the city, county, or state government.
9.7.3.2. Signs within the public rights-of-way, except those posted by a public
agency
9.7.3.3. In any manner or place that constitutes a hazard to pedestrian or
vehicular traffic
9.7.3.4. In a manner that obstructs free ingress to or egress from a required
door, window, fire escape, or other required exit.
9.7.3.5. Off-premise commercial signage affixed to a private residence or
dwelling, or displayed upon the grounds thereof.
9.7.3.6. Attached to or painted onto the following:
9.7.3.6.1. Trees, rocks or other natural features
9.7.3.6.2. Fence posts, telephone or utility poles
MRB Group – RG Revision 5.23.23 – Version 2
9.7.3.6.3. Roofs signs, or attached signs that project above the building
height.
9.7.3.7. Moving, Flashing, or Audible Signs
9.7.3.7.1. Signs that move by any means regardless of whether they
contain written messages
9.7.3.7.2. Signs set in motion by movement of the atmosphere or by
mechanical, electrical, or other means, including, but not
limited to: flags, adversails, feathers, pennants, posters,
propellers, discs, ribbons, balloons, streamers, strings of light
bulbs, and spinners.
9.7.3.7.3. Flashing signs or devices displaying intermittent lights or lights
of changing intensity
9.7.3.7.4. Signs that emit audible sound or visible matter.
9.7.3.8. Movable or Towed Signs: Signs constructed to be used as a conveyance
upon public streets, and usually parked in public places or private
property primarily for the purpose of public display.
9.7.3.8.1. Exception: Commercial vehicles, including standard passenger
vehicles, that are fully operable may bear a permanently-
adhered commercial message. They must be parked in a
typical parking space and may not be located on landscaped
areas or at angles to the street so as to increase visibility.
9.7.3.9. Inflatable signs [including inflated balloons having a diameter of greater
than two (2) feet for special events and grand openings, used in
conjunction with a commercial building, project, or enterprise are
permitted for a period not to exceed fourteen (14) days
9.7.3.10. Sign Content Limitations
9.7.3.10.1. Signs copying or imitating official government signs, or that
purport to have official government status
9.7.3.10.2. Any sign and/or sign structure that obstructs the view of,
may be confused with, or purports to be a governmental or
traffic direction/safety sign.
9.7.3.10.3. Signs containing statements, words, or pictures of obscene,
pornographic, or immoral character that is not considered
protected speech
9.7.3.11. Impermanent and Unsubstantial Sign Types: Signs that are
constructed of impermanent and unsubstantial materials including
but not limited to inflatable signs, snipe signs, and feather
signs/banners.
9.7.3.12. Abandoned or Deteriorated Signs or Businesses:
9.7.3.12.1. Sign structures no longer containing signs.
9.7.3.12.2. Signs made structurally sound by unsightly bracing.
9.7.3.12.3. Abandoned or dilapidated sign.
9.7.3.12.4. Signs referencing businesses which have been out of
business for more than 30 days.
MRB Group – RG Revision 5.23.23 – Version 2
9.7.3.13. Billboards: Billboards are prohibited.
9.8. Violations
9.8.1. Impoundment of Signs
9.8.1.1. If any sign requiring a permit is erected without a permit, or if any sign is
erected in violation of these regulations, the Zoning Administrator shall
have the authority to give the owner thereof written notice of such
violation. The notice shall include a brief statement of the particulars in
which the violation is to be remedied. If the sign has been permitted,
notice to the person receiving the permit shall be sufficient. If the sign
owner cannot be found, the duty to perform corrections or removal of
the sign will be upon the property owner on whose property the sign is
located.
9.8.1.2. If within ten (10) days the owner of the sign fails to contact the Zoning
Administrator, bring the sign into conformance with these regulations,
and obtain a sign permit, the Building Official shall have the authority to
have the sign removed and impounded without further notice and the
cost of removal shall constitute a lien against the property on which the
sign is located. The Town shall not be liable for any damage to the sign
or property as a result of such removal.
9.8.1.3. The Zoning Administrator shall have the authority to remove and
impound, without notice to the owners thereof, any signs placed within
any street right-of-way, signs attached to trees, rocks or other natural
features, and signs attached to telephone and utility poles.
9.8.1.4. If the impounded sign is not claimed within 30 days, then the
administrator shall have authority to dispose of such sign.
3/30/23 MRB Draft.
Article 3 Zoning Districts and Boundaries
3.0 Zoning Districts and Boundaries
3.1 Purpose and Intent
For the purposes of this Ordinance, the various districts have been categorized as
Conventional Districts, Planned Developments, and Overlay Districts. Each district is
established as a specific and exclusive zoning district, and only those uses that are listed
as permitted are allowed. If a particular use of the land is not mentioned for a
certain district, that use shall be prohibited for that district unless the change is by
official amendment approved by Town Council.
3.2 Official Zoning Map
The Official Zoning Map shall be maintained in the Office of the Zoning Administrator. A
duplicate official Zoning Map shall be kept in the office of the Town Clerk. All zoning
district boundaries shall be clearly shown on the Zoning Map, and amendments shall be
recorded immediately after adoption. The official copies of the Zoning Map shall be
dated and attested by the Town Clerk, and shall be available for public inspection. The
official Zoning Map and any amendments adopted by Town Council shall constitute the
final authority for determination of zoning district boundaries. It shall be unlawful for
any person to make unauthorized changes to the Zoning Map.
3.3 Interpretation of District Boundaries
When there is any uncertainty as to the intended locations of any zoning district
boundary on the Zoning Map, the Town Staff shall make an interpretation of such map
upon request of any person. Any person aggrieved by any such interpretation may
appeal such interpretation to the Board of Zoning Appeals. The Town Staff, and the
Board of Zoning Appeals, in interpreting the Zoning Map or deciding any appeal shall
apply the following standards:
• Boundaries indicated as approximately following the centerlines of streets,
highways or alleys shall be construed as following such centerlines:
• Boundaries indicated as approximately following platted lot lines shall be
construed as following such lot lines;
• Boundaries indicated as approximately following political boundaries shall be
construed as following such boundaries;
• Boundaries indicated as following railroad lines shall be construed to be midway
between the main tracks or to follow the centerline of single tracks;
• Boundaries indicated as following the centerlines of waterways, marshes or
ditches shall be construed as following such lines;
• Boundaries indicated as parallel to or extensions of features shall be so
construed. Distances not specifically indicated on the Official Zoning Map shall
be determined by the scale of the map; and
3/30/23 MRB Draft.
• Where physical or cultural features existing on the ground are at variance with
those shown on the Official Zoning Map, or in other circumstances not covered
by this section, the Board of Zoning Appeals shall interpret the district
boundaries.
3.4 Lot Divided by District Boundaries
No structure or accessory use may be placed, structurally altered, or have a change in
use where the structure or use is or would be included within two or more
zoning districts unless such structure or use conforms to the requirements of all
applicable district regulations.
3.5 Changes
3.5.1 Changes made to zone boundaries or other matters portrayed on the Zoning
Map shall be made in accordance with Article 10, Amendments and Rezonings.
3.5.2 The Administrator shall enter changes onto the Zoning Map within a reasonable
period of time after a map amendment is approved by the Town Council. Where
the ordinance enacting a zone boundary change contains wording explaining or
clarifying the location of the new boundary, the Administrator may enter
notations on the Zoning Map reflecting the ordinance wording.
3.5.3 No changes of any nature shall be made to the Zoning Map or matter shown
thereon except in conformity with the procedures set forth in this Ordinance.
Any unauthorized change of whatever kind by any person or persons shall be
considered a violation of this Ordinance and punishable as provided by law.
3.5.4 Regardless of the existence of purported copies of the Zoning Map that may
from time to time be made or published, the Zoning Map which shall be located
in the Department of Planning, shall be the final authority as to the current
zoning status of land and water areas, buildings, and other structures in the
Town, except in the case of proven errors.
3.5.5 The Administrator shall maintain copies of superseded versions of the Zoning
Map for historical reference.
3.5.6 Where Town limit boundaries change by virtue of annexation or some other
means, the following provisions shall apply:
3.5.6.1 Areas to be annexed into the incorporated limits of Chapin shall be
assigned zoning classifications by the Town Council.
3.5.6.2 In all cases where additions to the Town’s total area require
adjustments in the zoning district boundaries, the adjustment shall be
made to the Zoning Map.
3.5.6.3 When reductions are made in the Town’s total incorporated area the
provisions of this Ordinance shall no longer apply to that area.
3.6 Establishment of Zoning Districts
The following zoning districts are herby established:
(CONTINUED ON NEXT PAGE)
3/30/23 MRB Draft.
Zoning District and
Description
Illustration
(RA) Rural Agricultural
District: The intent of the
RA district is to establish
and preserve areas
primarily
for agriculture and rural dw
ellings, forest management
and various other low
density (.2 d.u./acre) uses
on large sites, and to
encourage preservation of
natural resources and
guard against the
premature or unreasonable
alteration of land
resources. This district
may be utilized for areas
annexed by the Town to
preserve the existing rural
characteristics, and to
prevent urban sprawl.
RR, Rural Residential
District: RR districts are
intended to limit high
density development (.5
d.u./acre), and to protect
natural and agricultural
areas by limiting and
regulating commercial
development.
SR1, Suburban Residential
District 1: SR1 districts are
intended to be single
family residential areas
with detached units and
low population densities (1
d.u./acre).
3/30/23 MRB Draft.
SR2, Suburban Family
Residential District 2: SR2
districts are intended to be
single family residential
areas with detached units
and low population
densities (2 d.u./acre).
SR3, Suburban Family
Residential District 3: SFR3
districts are intended to be
the medium density (4
d.u./acre) single family
residential areas with
detached units.
TR1, Town Residential
District 1: TFR districts are
intended for medium
density (6 d.u./acre)
residential purposes,
including single family
detached units, duplexes,
and triplexes. These uses
shall be compatible in size
and scale with surrounding
residential development.
TR2, Town Residential
District 2: The purpose of
this district is to provide for
a mixture of single-family,
two-family, triplexes, and
other residential uses
except multifamily, on
smaller lots with a variety
of setbacks as well as the
location of higher density
dwellings (8 d.u./acre) such
as zero lot line homes and
rowhome developments.
3/30/23 MRB Draft.
TR3, Town Residential
District 3: The purpose of
the TR3 (12 d.u./acre)
district is to establish and
preserve multifamily
residential uses designed
to encourage and continue
a stable and healthy
environment for residential
uses and to exclude uses
which are not compatible
with such residential uses.
VC, Village Commercial
District: (12 d.u./acre) VC
districts are intended for
commercial and service
uses oriented primarily to
serving needs of persons
who live or work in nearby
areas. A variety of mixed-
density residential uses are
permitted when paired
with commercial uses.
TC, Town Center District:
(16 d.u./acre) The intent of
the Town Center (TC)
zoning district is to provide
an area for development of
an attractive, compact,
walkable, mixed-
use town center that
creates a live/work/play
environment for the
community.
PI, Public/Institutional
District: The PI district
supports generally non-
residential institutions and
employment areas that are
designed in a campus-like
setting, such as hospitals,
universities, research
facilities, and offices. It is
intended to ensure that
these unique institutions
3/30/23 MRB Draft.
are designed to be
compatible with their
surroundings and the rest
of the Town.
CC, Corridor Commercial:
It is the intent of this
section that the CC zoning
district be developed and
reserved primarily as a
retail service
and commercial area,
serving surrounding
neighborhoods and larger
community or citywide
clientele with a wide range
of commercial services,
including retail, offices and
business support services
located in areas which are
well served by collector
and arterial street facilities
as well as pedestrian
access facilities where
appropriate.
IC, Interstate Commercial
District: IC districts are
intended to provided
businesses that serve the
traveling public along I-26
such as restaurants, gas
stations and hotels/motels,
as well as large scale retail
and service establishments.
3/30/23 MRB Draft.
OC, Office Commercial: OC
districts are intended to
accommodate a variety of
commercial and
nonresidential uses
characterized primarily by
retail, office and service
establishments not in the
central business area.
LI, Light Industrial District:
LI districts are intended to
permit light manufacturing,
industrial, wholesale
commercial uses which do
not create nuisances by
noise or emissions beyond
the premises.
PD, Planned Development
District: PD districts
designate an area for
which an approved
development plan
constitutes the district
regulations. It is intended
to utilize the factors of
efficiency, economy,
flexibility, creative site
design, improved
appearance, compatibility
of mixed uses, maximum
benefits from open space,
safe and efficient vehicular
and pedestrian access for a
development characterized
by a unified site design for
mixed uses. A planned
development district may
(Source: Laurel Island PUD, Charleston)
3/30/23 MRB Draft.
be predominately
residential or
predominately commercial.
PO, Parks/Open Space
District: The open space
district is established as a
district in which the
primary use of the land is
predominantly reserved for
flood control, future
thoroughfare right-of- way,
public recreation,
community facility sites,
airport approaches, natural
or man-made bodies of
water, forests, and other
similar open space uses.
3.7 District Development Standards
(ON NEXT PAGE)
3/30/23 MRB Draft.
DISTRICT RA RR SR1 SR2 SR3 TR1 TR2 TR3 VC TC PI CC IC OC LI PO
LOT CONFIGURATION
Lot Width, Minimum 200' 100' 75' 60' 50' 40' 40' 50' 40' None 50' 50' 50' 50' 75' None
Lot Size, Minimum 5 acres 2.5 acres 1 acre .5 acre .25 acre
6,000 sq.
ft.
6,000 sq.
ft
6,000 sq.
ft.
4,000 sq.
ft. None None None None None
10,000 sq.
ft. None
Maximum Lot Coverage 25% 25% 25% 30% 45% 70% 70% 75% None None None 70% 70% 70% None None
Maximum Density
0.2
d.u./acre
0.5
d.u./acre
1
d.u./acre
2
d.u./acre
4
d.u./acre
6
d.u./acre
8
d.u./acre
12
d.u./acre
12
d.u./acre None N/A N/A N/A N/A N/A N/A
PRINCIPAL BUILDING PLACEMENT
Front Setback, minimum 50' 50' 25' 25' 25' 15' 10' 0' 0' 0' N/A N/A N/A N/A N/A None
Front Setback, maximum None None None None None 25' 25' 25' 15' 15' None None None None None None
Side Setback (Corner) 20' 20' 10' 10' 10' 10' 10' 10' None None 10' 15' 15' 15' None None
Side Setback 20' 20' 10' 10' 10' 10' 10' 10' None None 10' 15' 15' 15' None None
Rear Setback 20' 20' 20' 20' 20' 15' 15' 10' 10' None 25' 25' 25' 25' 25' None
Building Height 65' 50' 35' 35' 35' 35' 35' 50' 35' 65' 65' 65' 65' 65' 100' N/A
ACCESSORY BUILDING
PLACEMENT
Front Setback* None None 0' 0' 0' 5' 5' 5' 10' 10' 0' 10' 10' 10' None None
Side Setback (Corner) 10' 10' 5' 5' 5' 5' 5' 5' 5' None 5' 5' 5' 5' 5' 5'
Side Setback 10' 10' 5' 5' 5' 5' 5' 5' 5' None 5' 5' 5' 5' 5' 5'
Rear Setback 10' 10' 5' 5' 5' 5' 5' 5' 5' None 5' 5' 5' 5' 5' 5'
Height**
*The front setback for accessory buildings shall start at the principal façade of the principal use.
**The height of an accessory building shall not be greater than the height of the principal building, unless located in a Public Institutional (PI) zoning district.
3/30/23 MRB Draft.
3.8 General Lot and Building Standards
3.8.1 Standards Not Exclusive
In addition to the lot and building provisions in this article, standards for lots
and buildings in related building and fire codes may also apply.
3.8.2 Interpretation of Fractional Measurements
When any requirement of this ordinance results in a fraction of a unit, a fraction
of ½ or more shall be considered a whole unit and rounded up to the nearest
whole number.
3.8.3 General Lot Standards
3.8.3.1 Lot Occupancy: No building shall hereafter be erected, altered or moved
to occupy a greater percentage of lot area than is permitted within the
zoning district in which it is or will be located.
3.8.3.2 Lot Reduction: No lot shall be reduced in size which will not maintain
the total lot area, lot width, necessary yards, courts or other open
space, lot area per dwelling unit or other requirements of this article.
3.8.3.3 Yard Use Limitations: No part of a yard, court or other open space or
off-street parking required in connection with any building for the
purpose of complying with the regulations of this article shall be
included as part or all of the required yard, court, or other open space
or off-street parking for another building or structure, except as
provided in this article.
3.8.4 Lot Setbacks
3.8.4.1 Irregular Lots: The location of required setbacks on irregularly shaped
lots shall be determined by the Town Staff in accordance with the
following provisions:
3.8.4.1.1 Irregular Lot Lines: Generally, side lot lines shall be
perpendicular or radial to the street right-of-way, and rear
lines should be approximately parallel to fronting right-of-
way lines. Irregularly shaped lots shall be permitted at the
discretion of the Administrator when unique site conditions
exist.
3.8.4.1.2 Irregular Lot Setbacks: The location of required front, side,
and rear yards (or setbacks) on irregularly shaped lots shall
be determined by the Administrator, based on the
prevailing spacing of buildings on the adjacent parcels.
Where questions arise as to appropriateness, the applicant
may be requested to provide additional design information.
3.8.4.2 Double- and Triple-Frontage Lots: On lots with two street frontages, not
located at a corner, or with three frontages and located at a corner, the
front setback will apply to both the street that the building derives its
address from, in addition to the opposite, parallel street. This does not
apply to lots located on a corner with a rear alley. Double- and Triple
3/30/23 MRB Draft.
Frontage lots shall base their setback regulations based on the street
that it derives its address from. Double frontage lots shall be avoided
except in commercial zones, where essential to provide separation of
residential development from railroad or major street right-of-way or
from non-residential uses or where necessary due to topography.
Where a railroad or major thoroughfare right-of-way, as shown on the
major thoroughfare plan, abuts or runs through any portion of the
subdivision, the subdivision plat shall provide for either a minor street
or lots backing onto said right-of-way having a minimum depth of two
hundred (200) feet
3.8.4.3 Flag Lots: The use of flag lots in residential subdivisions shall be
permitted only if dictated by the terrain. Flag lots shall not be
permitted to solely allow an increase in the number of lots. The access
drive to a flag lot shall have a minimum width of 30 feet and shall be a
deeded part of the lot so accessed. No two flag lots may abut or
converge at the (poles) street right-of-way
3.8.4.4 Corner Lots: Corner lots shall be at least five (5) feet wider than interior
lots; provided however, the maximum required width of corner lots
shall be one hundred (100) feet (need dimensional standards footnote).
The minimum side building setback distances shall be at least the
minimum front building setback distance for the side adjacent to the
street
3.8.4.5 Setbacks from Designated Corridors: Setbacks shall be measured from
the future right-of-way established for specifically-designated streets in
an adopted corridor plan or subdivision if the adopted plan shows, at a
minimum, the horizontal alignment of the future roadway, pedestrian
and bicycle amenities, streetscape improvements and necessary right-
of-way, and other applicable requirements.
3.8.4.6 Residential variances and restrictive covenants: The Town Staff shall
only grant an Administrative Adjustment (Section 10.8) for a lot size or
setback requirement that conforms to the restrictive covenants of a
subdivision existing at the time of the adoption of this chapter or at the
time of annexation into the town.
3.8.5 Infill Lot Setbacks
In certain neighborhoods, historic setbacks do not conform to current
standards. It is the intent of the UDO to create predictability within blocks and
not reduce or enlarge setbacks where existing precedents are present. The
Town Staff shall have the authority to determine setback for infill lots to ensure
compatibility with adjacent structures unless superseded by an adopted plan
3.8.6 Encroachments
The features listed below shall be permitted to encroach into a required yard or
right-of-way, as applicable. Nothing in this section shall be misconstrued to
conflict with any other portion of this Ordinance.
3/30/23 MRB Draft.
3.8.6.1 Encroachment over Sidewalks: With approval of the City, county or
SCDOT (whichever has authority over a street), awnings, arcades,
canopies, and galleries, may encroach over the sidewalk to within 2 feet
of the curb, but they shall provide a vertical clearance of at least 8 feet
from any sidewalk. This encroachment is only permitted in the Town
Center (TC), Village Commercial (VC), and Town Residential Districts
(TR1, TR2, and TR3).
3.8.6.2 Upper Story Encroachments: Bay windows, balconies, and similar
features projecting from the principal building may encroach up to 50%
of the depth of the front and street side setback. With approval of the
City, county or SCDOT (whichever has authority over a street), upper-
story balconies or bay windows may encroach over the right-of-way a
maximum of 3 feet, but they shall provide a vertical clearance of at least
8 feet from any sidewalk. This encroachment is only permitted in the
Town Center (TC), Village Commercial (VC), and Town Residential
Districts (TR1, TR2, and TR3).
3.8.6.3 Lower Story Encroachments: Cornices, eave overhangs, chimneys, flues,
bay windows, and similar projections (including gutters) may encroach
up to 2 feet into any required yard.
3.8.6.4 Covered Porches: Covered porches may encroach a maximum of 8 feet
into any required front yard or street side yard setback and to within 5
feet of any interior side or rear yard property line.
3.8.6.5 Uncovered Porches, Decks, Patios, Steps and Stairs: Uncovered and
unenclosed porches, decks, patios, steps and stairs, and other similar
features may encroach to within 5 feet of any interior side and rear
property line. Steps and stairs may encroach up to 100% of the depth of
any required street yard setback, but may not encroach upon any public
sidewalk.
3.8.6.6 Walkways and Driveways: Uncovered and unenclosed walkways, and
driveways may encroach up to 100% of the depth of any required
setback, unless a buffer (Section 7.3.2) is required.
3.8.6.7 Handicap Ramps and Lifts: Ramps, lifts, fire escapes, or other required
accessibility structure by the fire or building code that is attached to the
exterior of a building may encroach into any required yard but may not
be closer to any property line than 5 feet. Such features shall not be
located in a front yard if it is possible to accommodate them in a side or
rear yard.
3.8.6.8 Mechanical Equipment: Mechanical equipment such as pool pumps,
ventilation systems, heating and air conditions units, tv antennas, and
satellite dishes, and other similar equipment determined by the
administrator, may encroach up to 25% into a required side or rear
yard. Mechanical Equipment shall comply will screening requirements in
Section 7.3.1.9.
3/30/23 MRB Draft.
3.8.6.9 Fences and Garden Walls: Fences and garden/yard walls may encroach
into required setbacks. The support structures for fences shall be
located on the inside of the fence, and no fence, wall or hedge shall
exceed the following dimensions:
3.8.6.9.1 In all districts fences within the front or street side setback
shall be a maximum of 4’ in height.
3.8.6.9.1.1 In the Light Industrial (LI) zoning district parcels
fronting a Primary Street may have fences or
walls up to 6 feet in height. Parcels fronting all
other streets may be up to 10 feet in height.
3.8.6.9.1.2 When residential uses are adjacent to
commercial, industrial, or other nonresidential
use, the administrator may increase this height
requirement to 7’.
3.8.6.9.2 Side or rear setback of residential districts: Privacy fences
or walls may be a maximum of 8’ in height.
3.8.6.9.3 Side or rear setbacks of nonresidential and industrial:
Fences or walls may be a maximum of 10’ in height.
3.8.6.10 Mailboxes: Mailboxes may encroach into a front setback area.
3.8.7 Measurement of Height
3.8.7.1 Building Height: Building height is measured as the vertical distance
from the mean grade elevation taken at the fronting street side of a
structure to the roof line of a flat roof, the ridge of a pitched roof, or the
deck line of a mansard roof.
3.8.7.2 Under-roof areas with dormers shall be counted as half-stories.
3.8.7.3 Exemptions from Building Height Requirements: Unless specifically
stated otherwise elsewhere in this ordinance, the height requirements
established in this ordinance shall not apply to:
3.8.7.3.1 Building elements (such as church spires, towers, cupolas,
domes, etc.) not intended for human occupancy;
3.8.7.3.2 Structures that are an accessory to institutional uses (such
stadium press boxes);
3.8.7.3.3 Water towers, transmission towers, and observation
towers, unless otherwise regulated in this ordinance;
3.8.7.3.4 Flagpoles, masts, and antennas (not otherwise regulated
elsewhere); and
3.8.7.3.5 Mechanical penthouses not exceeding 15 feet in height
which are set back at least 20 feet from the front elevation
of the building, and not visible from view from the public
right-of-way.
3.8.7.4 Other Height Requirements: Height requirements for signs, lighting,
landscape screens, and all other structures or objects for which a
dimensional height requirement is established by this ordinance shall be
3/30/23 MRB Draft.
measured as the vertical distance from the highest ground level at the
structure or object’s foundation to its highest point.
Source: Town of Chapin website. First collected Oct 14, 2026.