RecordWell Data

Backup Material

Oconee County · Oconee County · meeting of Oct 5, 2026 · Other

Open the original document More from Oconee County

Text

Extracted automatically from the original. Tables and formatting may not survive; the original document is authoritative.

Chapter 26 | Draft 1.7 | 1 Chapter 26 Roads and Bridges Word Track Changes copy 1.7 | October 2, 2026 Oconee County South Carolina Comparison with adopted Chapter 26, Supplement No. 55. Red strikethrough indicates deletion; blue indicates insertion; black indicates retained text. Revisions show whole words. Historical ordinance citations are retained as source history. ARTICLE I. IN GENERAL DIVISION 1. UNIFIED ROAD STANDARDS FOR THE UNINCORPORATED AREAS OF OCONEE COUNTY Sec. 26-1. General provisions. Purpose and applicability. These general provisions shall apply to both private roads and drives and public roads. The definitions section of the land development and subdivision chapter of the Oconee County Unified Performance Standards Ordinance (Ordinance 2008-20, [as codified in chapter 32, article VI, §§ 32-211—32-226]) shall apply to this article. The provisions of article I, division 1, of this chapter shall govern the County road system, County road rights -of- way, public roads proposed for acceptance into the County road system, connections and encroachments affecting County roads, and the effect of subdivision and land development on the safety and capacity of County roads. Except as expressly provided in this chapter, the standards for a private driveway, private drive, or private road created or materially altered through subdivision or land development are set forth in chapter 32, article VI. (1)Survey standards. Route surveys and plats shall be prepared and survey data entered thereon in accordance with the most recently adopted version of the "Minimum Standards Manual of the Practice of Surveying in South Carolina" established by the South Carolina Board of Registration for Professional Engineers and Land Surveyors, provided that all elevations information shall refer to Mean Sea Level Datum or other established datum (with a minimum of two benchmarks). Accuracy of plats and attendant data shall be no less that than required in said manual for Class B Suburban Land Surveys. (2)Utilities. When utilizing a road right-of-way, all utility lines shall be buried at a depth of at least 36 inches. Such lines shall be located a minimum of two feet, outside the portion of the road to be surfaced to prevent having to cut into the paved surface or reconstruct drainage structures to serve abutting properties. In order to prevent future road cuts, utility stub-outs shall be added to all utility lines extending beyond the roadway to each property line. (3)Road signs. Road name signs shall be installed at all intersections with in a subdivision. All other signs shall be installed as required by and at the direction of the county engineer or his/her designee. All signage will be in accordance with the manual of uniform traffic control devices. The developer shall be responsible fo r all cost of road signage for private drives, private roads, and proposed county roads (at a cost determined by resolution of county council from time to time) prior to acceptance of road by the county. Any person who shall willfully or maliciously damage, deface, remove or otherwise tamper with a sign erected by a subdivider or the county designating the name of any county road shall be guilty of a misdemeanor and punished in accordance with this article. In addition thereto, such person shall be liable to the county for the cost incurred by the county as a result of said criminal acts. (4)Submission of road plans. Construction plans for roads shall include accurate topographic information with increments of no more than five feet. In addition, all such p lans should note the following items: the location and dimensions of all drainage features; routes of surface water drainage for the entire development; a typical cross section of the proposed roadway; road profiles; horizontal and vertical curve designs; right-of-way dimensions; the Chapter 26 | Draft 1.7 | 2 location of all cuts and fills; finished grade elevation; all necessary erosion control practices, which may include but are not limited to, permanent vegetation, lined or piped ditches or vegetated waterways; and contact infor mation of all interested parties. (5)Road alignment and location. The direction and pattern of roads shall take advantage of the land contour to eliminate or reduce excessive cutting and filling, and provide roads with reasonable grades. (Ord. No. 2008-19, Art. 1(1—5), 12-16-2008) Sec. 26-2. Private road standards Definitions and regulations. coordination with chapter 32. Oconee County shall have no responsibility for nor control of the design, engineering, construction, inspection or maintenance of private driveways, drives and roads in Oconee County and shall only be involved with private driveways, drives and roads to enforce these regulations and to the extent required for the county to carry out its other duties and functions, such as approving the subdivision of property. (a) Definitions. Private driveway, private drive, private road, and private roadway easement shall have the meanings stated in chapter 32. The classification and method for counting lots, dwelling units, and other units of development served shall be governed by section 32-228. (a)Private driveways. Private driveways shall serve no more than three residential dwellings, and shall be maintained by County road means a road in the property owner(s). No design standards shall apply to private driveways, but driveways must comply with County road system under section 26-6 or a legacy County road whose status is established under section 26-11 or other applicable building and fire codes. law. (b)Private drives. All private drives existing and in use at the time of adoption of these regulations, as well as those private drives under construction prior to the time of adoption, shall be exempted from the standards contained in this section. This exemption shall also extend to those private driv es approved by the planning department prior to the time of adoption. All other private drives shall: Road acceptance means the formal action by which the County accepts the required property interest and the maintenance responsibility specified in the acceptance action. (1)Serve no more than ten lots or dwellings; (b) The design, construction, materials, inspection, certification, maintenance, disclosure, and treatment of existing private access created or materially altered in a subdivision or land deve lopment shall be governed by chapter 32, article VI. A private access serving property outside a subdivision or development remains subject to otherwise applicable County and state requirements. Definitions in chapter 32 apply to a chapter 32 procedure ref erenced in this chapter but do not otherwise expand the application of this chapter. (2)Have a minimum road right-of-way of 50 feet, or an appropriately executed private roadway easement as defined by these regulations; (c) A connection from a private driveway, private drive, or private road to a County road shall also comply with section 26-7. A connection to a state road requires the approval of the South Carolina Department of Transportation. County approval does not replace state approval. (3)Have an appropriate encroachment permit from either the county or the South Carolina Department of Transportation; (d) Approval of private access under chapter 32 shall not constitute County acceptance or establish a right to later acceptance. A request for acceptance into the County road system shall be considered under section 26 -6. County inspection, regulatory action, or emergency response shall not, by itself, constitute assumption of private maintenance responsibility. (4)Have a minimum driving surface width of 20 feet constructed of no less than five inches of compacted crushed stone or gravel base; a minimum height clearance of 13½ feet; and appropriate documentation from a professional engineer licensed by the State of South Carolina certifying the maximum weight limit of any bridge or culvert Chapter 26 | Draft 1.7 | 3 located along the drive. All bridges and any culvert over which a private drive crosses a perennial stream must include appropriate signage (located at each end of the bridge) displaying the structure's weight limits; (5)Be maintained by an individual, association of property owners, or commonly held by the property owners fronting the private drive; (6)Comply with all current fire regulations and codes; (7)Shall serve no more than ten dwellings, and shall connect to another road, either public or private, on one end only. In the event proposed construction and/or development will result in an existing private drive serving 11 or more dwellings, the existing drive shall be upgraded so as to meet the standards put forth in these regulations for private roads; (8)Parcel boundaries may extend to centerline of the road, with the appropriate road right -of-way shown on all plats and deeds; (9)Be named in accordance with adopted E-911 addressing regulations and procedures; (10)Allow at least 100 feet of sight distance for each ten miles per hour of the posted speed limit where the private drive intersects a public road. The sight distance shall be measured from a seeing height of 3½ [feet], offset 15 feet from edge of road, to an object 4¼ feet in height above the grade of the public road, as stated in SCDOT's 1996 Access and Roadside Management Manual. If the proposed drive does not meet the sight distance requirement, a waiver must by signed by the individual(s) constructing the private drive stating that the property owner(s) is liable and responsible for any accidents, injuries, problems, and property damage resulting from improper sight distance; (11)Meet all applicable stormwater management and sediment control regulations; (12)Be approved in writing by planning commission or designated staff prior to submission of plat(s) to the register of deeds for recording. The following shall be prominently printed on the plat(s): "THE ROAD RIGHT-OF-WAY SHOWN ON THIS PLAT SHALL BE PRIVATE DRIVES NOT OWNED, MAINTAINED OR SUPERVISED BY OCONEE COUNTY, AND WERE NOT CONSTRUCTED PURSUANT TO ANY PLAN FOR FUTURE ACCEPTANCE BY OCONEE COUNTY. ROAD RIGHT-OF-WAYS SHOWN UPON THE PLAT SHALL NOT BE ACCEPTED FOR MAINTENANCE BY OCONEE COUNTY AT ANY TIME IN THE FUTURE UNLESS CONSTRUCTED IN ACCORDANCE WITH ALL ADOPTED OCONEE COUNTY REGULATIONS. MAINTENANCE OF THE RIGHT -OF-WAY SHALL BE THE RESPONSIBILITY OF _______." (13)Signage shall comply with the manual for uniform traffic control devices. (c)Private roads. Private roads shall provide vehicular access and road frontage to developments, or sections of developments, containing more than ten dwellings. All private, nondedicat ed roads shall be prominently indicated as such on plats prior to subdivision approval. Maintenance arrangements for such roads must be noted in writing on subdivision plat submittals and must be subsequently recorded. The development served by a private r oad shall have direct access into a public road, and no such private road shall be laid out so as to serve property outside the development. All private roads shall: (1)Serve a minimum of 11 lots; (2)Have a minimum road right-of-way width of 50 feet; (3)Be designed in accordance with the regulations set forth in subsections 26 -3(e) and (r) of these regulations; (4)Be constructed in accordance with the regulations set forth in subsections 26 -3(f) and (r) of these regulations; (5)Be maintained by an association of property owners or the developer and be designated on all plats and recorded in appropriate deed covenants and restrictions, or an appropriately executed private roadway easement as defined by these regulations; (6)Parcel boundaries may extend to the centerline of the road, with the appropriate right-of-way designated on all plats and deeds; (7)Be legally certified for compliance by a surveyor/engineer licensed by the State of South Carolina; Chapter 26 | Draft 1.7 | 4 (8)Be named in accordance with adopted E-911 addressing regulations; (9)Meet all stormwater management and sediment control regulations; (10)Be properly approved in writing by planning director prior to submission of plat(s) to the register of deeds for recording. The following shall be prominently printed on the plat(s): "THE ROAD RIGHT-OF-WAY SHOWN ON THIS PLAT SHALL BE PRIVATE ROADS, NOT OWNED, MAINTAINED OR SUPERVISED BY OCONEE COUNTY AND NOT CONSTRUCTED PURSUANT TO ANY PLAN FOR FUTURE ACCEPTANCE BY OCONEE COUNTY. ROAD RIGHT-OF-WAY SHOWN UPON THE PLAT SHALL NOT BE ACCEPTED FOR MAINTENANCE BY OCONEE COUNTY AT ANY TIME IN THE FUTURE UNLESS CONSTRUCTED IN ACCORDANCE WITH ALL OCONEE COUNTY REGULATIONS. MAINTENANCE OF THE RIGHT-OF-WAY SHALL BE THE RESPONSIBILITY OF THE _______." (11)Have installed signs that control the traffic flow in a safe manner as specified by standards in the Manual for Uniform Traffic Control Devices. With the exception of the requirements put forth in this section, all private roads shall meet the requirements for all public roads as defined by this article. (Ord. No. 2008-19, Art. 2(1—3), 12-16-2008; Ord. No. 2013-16, § 2A, 7-16-2013; Ord. No. 2022-23, § C, 10-18- 2022) Sec. 26-3. Public roads. (a)Continuation of adjoining road system. The proposed road layout shall extend existin g roads on a logical course at a width which meets the minimum required by this article. A minimum 100:1 taper section shall be used to transition from one width to another. This section establishes design, construction, and inspection standards for exist ing County roads to be reconstructed and public roads proposed for acceptance into the County road system. Compliance with this section is a condition of consideration for acceptance and does not itself constitute acceptance. Private roads serving land development shall be governed by chapter 32, article VI. (b)Road system coordination. The road system within a subdivision shall be coordinated with existing, proposed, and anticipated roads (hereinafter "surrounding roads") outside the subdivision, as determ ined by the county or the State of South Carolina. Subdivision roads shall intersect with surrounding roads at safe and convenient locations and where necessary to permit the efficient movement of traffic between residential neighborhoods by emergency service vehicles. Subdivision roads shall only enter arterial roads when absolutely necessary. Whenever connections to surrounding roads are required by this section, the road right -of-way shall be extended and the street developed to the property line of the subdivided property (or to the edge of the remaining undeveloped portion of a single tract) at the point where the connection to the anticipated or proposed street is expected. In addition, the permit-issuing authority may require temporary turnarounds to be constructed at the end of such streets pending their extension when such turnarounds appear necessary to facilitate the flow of traffic or accommodate emergency vehicles. All temporary dead-end streets must be approved by the planning director and the county engineer. Survey standards. A person proposing a road for County acceptance shall provide a survey plat prepared in accordance with the applicable standards for the practice of surveying in South Carolina. Elevations shall be tied to an identified datum and at least two benchmarks. Construction plans shall comply with subsection (e)(12). Subdivision plat and private-road submittal requirements are governed by chapter 32. (c)Road names. A proposed road which is obviously in alignment with or an extension of an existing named road shall bear the name of the existing road. Except for the above, in no case shall the name of a proposed road duplicate or be phonetically similar to an existing road name, irrespective of the use of suffix (road, a venue, boulevard, drive, place, court, lane, etc.). It shall be unlawful for any person in laying out any new road to name such road on any final plat or instrument, without first obtaining the approval of the Oconee E -911 Addressing Office. Chapter 26 | Draft 1.7 | 5 (a) Existing road system. Existing County roads shall, where appropriate, be used to improve connectivity and access throughout the County. New direct access to a County road shall generally be limited to one private driveway, private drive, or private road per parcel. Additional access may be allowed when required by applicable law or emergency-access requirements, or when approved by the County Engineer or designee through the encroachment-permit process based on traffic safety, circulation, or site-specific conditions. Major subdivisions and commercial developments shall utilize internal road systems and minimize direct connections to County roads. Minor subdivisions shall, where feasible, provide a plan showing an access connection from the parent parcel to any remaining property that may be developed in the future. The access limitations established by this subsection shall apply to new or additional access proposed after adoption of this chapter. Nothing in this subsection shall require the removal or modification of a lawfully existing access point solely because it does not conform to the current access limitations. (d)Residential buffers for collector or arterial roads. Where a subdivision abuts or contains an existing or proposed collector or arterial road; lots which abut or are adjacent to these existing or proposed collector or arterial roads shall face a local road. Other treatment may also be required, as necessary, for adequate protection of the landscape and residential properties and for separation of through and local traffic. Special treatment may be required, such as screen planting contained in a nonaccess reservation along the rear property line adjacent to the arterial road. (b) Public road system coordination. The County road system shall be coordin ated with existing, proposed, and anticipated roads to promote continuity and connectivity within the County transportation network. Roads shall connect with surrounding roads at safe and convenient locations to facilitate the efficient movement of traffic and access by public safety vehicles. Where a future connection to an existing, proposed, or anticipated road is planned, the roadway and right-of-way shall be extended to the property line or to the edge of the remaining undeveloped portion of a single tract to allow for future connection. (e)Road design (geometric criteria). In general, geometric criteria for road design shall be in accordance with standards of the South Carolina Department of Transportation (SCDOT). Said standards are those contained in the latest edition of "A Policy on Geometric Design of Highways and Streets" by the American Association of State Highway and Transportation Officials. Local and collector residential roads (public) shall be designed in accordance with the following standards. (c) Road names and signs. A road name shall be approved under article II of this chapter at the Preliminary Plan stage when a Preliminary Plan is required by chapter 32, and before the name is shown on a final plat or other recordable instrument. A road that is an extension of an existing named road shall bear that name unless a different name is approved under article II. The developer shall install the signs required for a road proposed for County acceptance in accordance with section 26-107 and the approved construction plan. (1)Minimum right-of-way, pavement, and shoulder width shall be as follows: (d) Reserved. Road Type Right-of-Way Pavement Shoulder Arterial1 66′ or greater 28′ 10′ Collector 50′ 24′ 8′ Major local 50′ 22′ 6′ Minor local 50′ 20′ 4′ (e) Roadway geometric design. Roadway geometric design shall follow the applicable standards and criteria established by the 2018 edition of A Policy on Geometric Design of Highways and Streets, published by the Chapter 26 | Draft 1.7 | 6 American Association of State Highway and Transportation Officials. Existing County roads to be reconstructed and roads proposed for County acceptance shall also meet the following minimum requirements for the road classification. In the event of a conflict, an express requirement of this subsection shall govern. 1 As determined by county engineer Alignment. A road proposed for County acceptance shall follow the terrain, so far as practicable, to reduce unnecessary cutting and filling while meeting the applicable standards for grade, drainage, sight distance, accessibility, and emergency access. For high density residential or nonresidential subdivisions or portions thereof, additional right -of-way or pavement width (1) Minimum right-of-way, pavement, and shoulder widths shall be provided when determined as necessary by the planning commission or county engineer. follows: (2)Cul-de-sacs shall comply with current fire regulations and codes. Dead -end streets without turnarounds are prohibited. All unpaved islands located within perimeters of a cul-de-sac shall be round in configuration, centered within the right-of-way, curbed and properly drained. The area utilized by any unpaved island shall not be considered part of the minimum area needed to meet the required dimensions for the cul-de-sac or right-of-way and shall be governed by the same standards for planted median islands, as set forth in this article. Road Type Design Speed Right-of-Way Pavement Shoulder Arterial 40 mph minimum 66 foot minimum 24 feet 8 feet Collector 30 mph minimum 50 foot minimum 22 feet 6 feet (3)Horizontal curvature shall be introduced at any change in road direction, and the minimum centerline radius shall be 150 feet for local roads and 250 feet for collector roads. Arterial road curvature shall be in accordance with state highway department standards. Minimum tangent between reverse curves shall be 150 feet for local roads, and 100 feet from curve to any intersecting road right-of-way. (2) Reserved. (4)Stopping distance on vertical curves, horizontal curves, or normal intersections shall allow at least 100 feet of sight distance for each ten miles per hour of the posted speed limit where the road intersects another public road. (3) Horizontal curvature shall be introduced at any change in road direction, and the minimum centerline radius shall be based on a maximum superelevation rate (emax) of 6 percent. For example, the minimum curve radius is 231 feet for collector roads at a 30-mph design speed and 485 feet for arterial roads at a 40-mph design speed. The minimum tangent between reverse curves shall allow the driver to have 6 to 7 seconds of travel time before having to change course coming out of a curve with normal crown. For example, at a 30 -mph design speed, the minimum tangent length is 300 feet. For reverse curves that are superelevated, tangents shall accommodate superelevation runoff and tangent runout. a.The sight distance shall be measured from a seeing height of 3½ feet, offset 15 feet fr om edge of road, to an object 4¼ feet in height above the grade of the public road, as stated in SCDOT's 1996 Access and Roadside Management manual. See drawing. (4) Stopping sight distance and vertical curves. Vertical curves, horizontal curves, and inte rsections shall provide the minimum stopping sight distance for the applicable design speed. The minimum stopping sight distance and vertical curve K-values shall be based on the applicable AASHTO design criteria. For ease of review, the minimum values are as follows: Superseded sight distance illustration Chapter 26 | Draft 1.7 | 7 Design Speed (mph) Minimum Stopping Sight Distance Minimum Crest Curve K Value Minimum Sag Curve K Value 30 200 feet 19 37 35 250 feet 29 49 40 305 feet 44 64 45 360 feet 61 79 50 425 feet 84 96 b.Minimum sight distance at intersections shall provide a clear sight triangle. The right -of-way shall be clear of obstacles to enable the minimum sight distance required, as determined by the speed limit of the road being accessed increases. The necessary right-of-way in either direction shall be entered upon the final plat prior to recording. Modifications may be required by the county engineer in order to insure safety. Chapter 26 | Draft 1.7 | 8 a. Minimum sight distance at roadway intersections shall provide a clear sight tri angle. Sight profiles shall be provided to ensure proper sight distance. The right-of-way shall be clear of obstacles to provide the minimum sight distance required based on the design speed of the intersecting roads and the intersection configuration. The necessary right-of-way in either direction shall be included in the right-of-way and shown on the final plat prior to recording. (5)Roads (5) Intersection skew. Roads shall be designed to intersect as nearly as possible at right angles. In no case shall the angle of intersection be less than 75 degrees. Minimum The minimum radius of curb or pavement edge at intersections shall be at least 20 feet at intersections with local roads and 25 feet at intersections with collector roads. feet. (6)Road (6) Minimum and maximum grades. Roadway centerline grades shall be no less than 0.5 percent and no greater than 12 10 percent. The following shall apply: Road Classification Maximum Grade Arterial Roads 4 percent Collector Roads 6 percent Local 12 percent Road Classification Maximum Grade Arterial Roads 8 percent Collector Roads 10 percent (7)Proposed intersections on one side of a road (7) Intersection spacing. Roadway intersection spacing shall coincide with existing or proposed intersections on meet the opposite side. Minimum centerline offset for intersections on requirements set forth in the opposite side of a road shall be 150 feet. No two roads may intersect on the same side of a road at a centerline separation distance of less than 400 feet. SCDOT Access and Roadside Management Standards, 2008 Edition, revised July 8, 2025. (8)Intersections (8) Intersection grades. Intersections shall be designed with a flat grade whenever practical. When approaching an intersection in hilly or rolling areas, a leveling area shall be provided having not greater than a five percent grade at a distance of 30 feet, measured from the nearest right-of-way line of the intersecting street. grade no more than 6 percent. (9)If the developer proposes a planted median island, the road right -of-way shall be divided in half for each half of the road (25 feet each side) with each lane centered in the right-of-way. A perpetual maintenance plan shall be submitted to the county prior to construction of said planted median island. the county shall not be responsible for maintaining any median vegetation. Vegetation within the right-of-way may be removed by the county if it presents a safety or visual hazard. All planted medians shall be drained and maintained by methods submitted by the developer and approved by the county engineer. (9) Planted medians. If the developer proposes a roadway with a planted median, the road right-of-way shall be increased to accommodate the increased width needed. A perpetual maintenance plan and maintenance agreement shall be submitted to and approved by the County Engineer or designee prior to construction of the planted median. The County shall not be responsible for maintaining any median vegetation. Vegetation within the right-of-way may be removed by the County if it presents a safety or visual hazard. All planted medians shall have sufficient drainage. Chapter 26 | Draft 1.7 | 9 (10)All driveway locations must be approved by the county engineer. (10) Driveways. All proposed driveways shall obtain an encroachment permit. Existing driveways on roads proposed for County maintenance shall be inventoried and any defici encies shall be documented on the as-built plans providing information about the condition, adequate sight distance, drainage and location of all existing driveways. (f)Road construction. In general, all public roads shall be constructed in accordance with the SCDOT "Standard Specifications for Highway Construction" (latest edition) as it related to earthwork, bases/subbases, paved surfaces, etc. The following requirements shall also apply: (11) Utilities. When utilizing a County-maintained road right-of-way, all utility lines located outside the shoulders and ditches shall be buried at a minimum depth of 36 inches. Utility lines located between the roadway and ditch shall be buried at a minimum depth of 42 inches. Such lines shall be located a minimum of three feet outside the roadway to protect the roadway and drainage system. No open trench method shall be used within two feet of the roadway. In order to prevent future road cuts, utility stub-outs shall be added to all utility lines extending beyond the roadway to each property line. (1)Paved road surfaces are required for all new roads. The county engineer may wave the strict application of aggregate requirements for hot mixed asphalt pavement with materials prepared with stone from the county rock quarry. (12) Submission of road plans. Construction plans for roads shall include accurate topographic information in contour intervals no more than two feet. In addition, all roadway plans shall note the following items: the location and dimensions of all drainage features; routes of surface water drainage for the entire project; a typical cross section of the proposed roadway; road profiles; horizontal and vertical curve designs; right-of-way dimensions; the location of all cuts and fills; slope steepness; finished grade elevation; all necessary erosion control practices, which may include but are not limited to, permanent vegetation, lined or piped ditches or vegetated wa terways; and contact information of all interested parties. (2)The minimum base course for all roads shall consist of type #1 (550 lbs. per square yard) crushed gravel aggregates compacted on the roadway to a depth of not less than five inches. Compaction of the aggregate shall comply with the standards set forth in this article. (f) Road construction. In general, all public roads shall be constructed in accordance with the SCDOT "Standard Specifications for Highway Construction" (2025 edition) as they relate to earthwork, bases/subbases, paved surfaces, etc. The following requirements shall also apply: (3)Local roads. When hot asphaltic mix will be applied, specifications for set up are same as for the surface treatment. Asphalt shall be applied at no less than two-inch compacted of type as specified by the county engineer. (1) Paved road surfaces are required for all new roads and shall be designed by a professional engineer licensed in South Carolina. The County Engineer or designee shall waive the stric t application of aggregate requirements for hot-mix asphalt pavement using materials prepared with stone from the County rock quarry for Type C asphalt mixes. (4)Collector roads. Road base shall include 550 lbs. of stone per square yard (approx. 5) with tw o-inch surface course of asphaltic concrete. (2), (3) Reserved. (5)Industrial/commercial roads. Road base shall include 650 lbs. of stone per square yard (approx. 6) with two -inch surface course of asphaltic concrete. (4) Collector roads. The minimum pavement section for collector roads shall consist of not less than 8 inches of type #1 crusher run base, 2 ½ inches of Type C Intermediate, and 1 ½ inches of Type C Surface or equivalent based on structural number and pavement design. Chapter 26 | Draft 1.7 | 10 (6)Road paving is required for all new nonresidential subdivisions falling under the jurisdiction of this article. Pavement design requirements for a nonresidential subdivision shall be in accordance with sound engineering principles as outlined in procedures adopted by the American Association of State Highway and Transportation Officials; or the Portland Cement Institute; or the National Asphalt Institute. All designs shall be subject to review and approval of the county engineer and the county planning commission. However, in no case shall the paving standard be less than the standard required for a new residential subdivision. (5) Arterial, industrial, and commercial roads. The minimum pavement section for arterial, industrial, and commercial roads shall consist of not less than 8 inches of type #1 crusher run base, 3 inches of Type C Intermediate, and 2 inches of Type C Surface or equivalent based on structural number and pavement design. (7)The entire right-of-way area shall be cleared of all stumps, roots, brush, and other objectionable materials prior to grading roads. All tree stumps and other vegetation shall be removed to a depth of two feet below the sub - grade. Rock, when encountered, shall be scarified to a minimum depth of three inches below sub -grade. The entire right-of-way shall be graded. (6) Reserved. (8)All debris and other material deemed unsuitable by the county engineer shall be removed before any dirt or soil is placed in fills for the subgrade. Unsuitable materials include any organic matter, unstable soil, trash, large stones, or other items that prevent the soil from being properly compacted. (7) The entire right-of-way area shall be cleared of all stumps, roots, brush, and other objectionable materials prior to grading roads. All tree stumps and other vegetation shall be removed to a depth of two feet below the subgrade. Rock, when encountered, shall be scarified to a minimum depth of three inches below subgrade. The entire right-of-way shall be graded to meet approved plans and specifications. (9)All fill lifts shall be formed by placing and spreading the material in successive, uniform, horizontal layers of not more than six inches in depth for the full width of the cross section and shall be kept level by the use of approved equipment. Prior to each subsequent layer the compacted layer shall be scarified before placing fill. The county engineer or his designated representative may call for compaction tests at the completion of any of the six -inch lifts being made. Each level will be compacted to a 95 percent proctor. (8) All debris and other material deemed unsuitable by the County Engineer or designee shall be removed before any dirt or soil is placed in fills for the subgrade. Unsuitable materials include any organic matter, unst able soil, trash, large stones, or other items that prevent the soil from being properly compacted. (10)Suitable material shall be placed in the embankment for the formation, compaction, and shaping of all embankments, subgrades, shoulders, slopes, intersections, approaches and private entrances to conform to the typical cross section shown on the approved road construction plan. (9) All fill lifts shall be formed by placing and spreading the material in successive, uniform, horizontal layers of not more than six inches in depth for the full width of the cross section and shall be kept level by the use of approved equipment. Before placing each subsequent layer, the compacted layer shall be scarified before placing fill. The County Engineer or designee may call for compaction tests at the completion of any of the six-inch lifts being made. Each lift shall be compacted to 95 percent of maximum density. (11)When an embankment is to be on a hillside or against an existing embankment sloping more than 20 degrees from the horizontal, the slope of the hillside or existing embankment shall be plowed deeply or cut into steps before filling is commenced. All embankments shall be formed by placing and spreading the material in successive, uniform, horizontal layers of not more than six inches in depth for the full width of the cross section and shall be kept level by the use of approved equipment. Embankments over and around pipes, culverts, arches, bridges, or other structures shall be constructed of materials approved by the county engineer. (10) Suitable material shall be placed in the embankment for the formation, compaction, and shaping of all embankments, subgrades, shoulders, slopes, intersections, approaches and private entrances to conform to the typical cross section shown on the approved plans. Chapter 26 | Draft 1.7 | 11 (12)All pipe culverts shall consist of the following materials: (11) When an embankment is to be on a hillside or against an existing embankment sloping more than 20 degrees from the horizontal, the slope of the hillside or existing embankment shall be plowed deeply or cut into steps before filling is commenced. All embankments shall be formed by placing and spreading the material in successive, uniform, horizontal layers of not more than six inches in depth for the ful l width of the cross section and shall be kept level by the use of approved equipment. Embankments over and around pipes, culverts, arches, bridges, or other structures shall be constructed of materials approved by the County Engineer or designee. a.Reinforced concrete conforming to the requirements of American Association of State Highway Officials (AASHO) M170 Class 3 pipe. (12) All pipe culverts shall consist of the following materials: b.High density polyethylene (HDPE) corrugated with a smooth interior pipe a. Reinforced concrete conforming to the requirements of American Association of State Highway and Transportation Officials (AASHO) M294M, Type S (AASHTO) M170 Class 3 pipe. All pipe culverts shall be of sufficient size to adequately insure proper d rainage. Calculations by a professional engineer licensed by the State of South Carolina must be submitted and approved by the county engineer. Rip -rap shall be securely installed over an approved silt barrier to the height of the high water mark around th e end of all pipe culverts. b. High-density polypropylene pipe corrugated with a smooth interior conforming to the requirements of AASHTO M330, Type S pipe. (13)In the event that the engineer, after consultation with appropriate authorities, deems the cro ssing of a watercourse to necessitate a bridge, such bridge shall conform to current SCDOT specifications for steel reinforced concrete bridges of at least 24 feet in width. Such bridges shall be at an elevation as to be approved by the county engineer. All pipe culverts shall be of sufficient size to adequately ensure proper drainage. Calculations by a professional engineer licensed by the State of South Carolina must be submitted and approved by the County Engineer or designee. Riprap shall be securely installed over an approved silt barrier to the height of the high -water mark around the end of all pipe culverts. (14)All drainage inlets and outlets not accessible from the road right -of-way must include a permanent easement allowing the county access to the adjacent property needed to perform necessary maintenance work. Oconee County will not be responsible for any damage off of the right-of-way due to high water or flash flood conditions (13) In the event that a crossing of a watercourse necessitates a b ridge, such bridge shall conform to the SCDOT Bridge Design Manual (2006 edition) with a driving surface of at least 24 feet in width. Bridges shall be at an elevation approved by the County Engineer or designee. See section 26-3(p)(1). (g)Compaction and testing. Compaction of sub-grade and base courses shall conform to the applicable sections of the latest published edition of the South Carolina Highway Department Standard Specifications for Highway Construction. Nuclear compaction test may be conducted on all sub-bases as directed by the county engineer. A loaded (minimum of 60,000 lbs. gross weight) tandem roll test of the sub -base shall be performed. Any of the compaction tests may be directed by the county engineer or his designated representative durin g an intermediate six-inch lift. A loaded (minimum of 60,000 lbs. gross weight) tandem roll test will also be performed upon setup of the base material prior to paving the road. Any substandard materials will be replaced and retested as directed by the county engineer or his designated representative. Upon completion of a road, all fills shall be protected by either seeding or rip-rap. All fills of 2½:1 or steeper shall be protected by rip-rap. Shoulders and other disturbed soil along the entire cleared area of the right-of-way shall be seeded in such a manner as to ensure uniform sod. (14) All drainage inlets and outlets not accessible from the road right -of-way must include a permanent easement allowing the responsible parties access to the adjacent property needed to perform necessary maintenance work. Chapter 26 | Draft 1.7 | 12 Oconee County shall not be responsible for any damage off of the right -of-way due to high water or flash flood conditions. (h)Inspections. (g) Compaction and testing. Compaction of subgrade and base courses shall conform to the applicable sections of the South Carolina Department of Transportation Standard Specifications for Highway Construction (2025 edition). Nuclear compaction testing may be conducted on all subbases as directed by the County Engin eer or designee. A loaded (minimum of 60,000 lbs. gross weight) tandem truck roll test of the subbase shall be performed. Compaction tests may be directed by the County Engineer or designee during an intermediate six -inch lift. A loaded (minimum of 60,000 lbs. gross weight) tandem roll test will also be performed upon placement of the base material prior to paving the road. Any substandard materials will be replaced and retested as directed by the County Engineer or designee. Upon completion of a road, all fills shall be protected by either seeding or riprap. All fills of 2½:1 or steeper shall be protected by riprap or other approved method. Shoulders and other disturbed soil along the entire cleared area of the right-of-way shall be seeded in such a manner as to ensure uniform sod. (1)A developer/owner shall notify the county engineer at least 48 hours prior to any requested inspection. Work done prior to inspection is done so at the contractor's and owner's own risk and may, upon decision of the county engineer or designee, be required to be removed and redone or have the quality substantiated by any tests deemed necessary all at the contractor's and/or owner's sole expense. Inspections shall be required for the following: (h) Inspections. a.At the completion of clearing and grubbing operations; (1) A developer/owner shall notify the County Engineer or designee at least 48 hours prior to any requested inspection. Work done prior to inspection is done at the contractor's and owner's own risk and may, upon decision of the County Engineer or designee, be required to be removed and redone or have its quality substantiated by any tests deemed necessary, at the contractor's or owner's sole expense. Inspections shall be required for the following: b.At a. At the completion of rough grading; clearing and grubbing operations; c.At b. At the completion of all utility construction along road right-of-way (including but not limited to water, sewer, electrical); rough grading; d.At c. At the completion of subgrade; all utility construction along road right-of-way (including but not limited to water, sewer, electrical); e.After installation and compaction d. At the completion of base course; subgrade; f.During all pavement applications; and e. After installation and compaction of base course; g.Final acceptance inspection. f. During all pavement applications; and (2)The contractor/owner's engineer shall be present for the following inspections: g. Final acceptance inspection. a.Rough grading inspections; (2) The project engineer retained by the owner or developer shall be present for the following inspections: b.Subgrade; a. Rough grading inspections; c.Base course inspections; and b. Subgrade; d.Final acceptance inspection. c. Base course inspections; and (i)Financial responsibility for maintenance. Following acceptance for maintenance by the county of any road, the developer/owner shall be financially responsible for all maintenance necessary due to deficiencies resulting from initial construction for a period of three years. The developer/owner shall post a bond or a letter of credit for the estimated cost of maintaining the road for three years from the date of acceptance. The county engineer shall Chapter 26 | Draft 1.7 | 13 determine the amount of the bond or letter of credit. The bond or letter of credit shall be maintained by the county finance department. The bond or letter of credit shall expire after three years from the date of acceptance of the road, or in the case of a subdivision road, after a build out of 70 percent of the subdivision, whichever occurs first. In order to facilitate the acceptance process, once a road had been substantially completed the developer/owner may request a written punch list from the county engineer. The punch list will note the items that must be completed prior to acceptance of the road by the county. d. The final inspection before a recommendation for acceptance under section 26 -6. A private road approved under chapter 32 is not accepted automatically into the County road system and, if later p roposed for acceptance, shall undergo the inspection and formal action required by section 26-6. (j)Contracts. Not withstanding any other provision of this section, the owner/developer may utilize an independent contractor to perform road work. In such case, the owner/developer shall be fully responsible for work performed by the contractor on said roads. (i) Financial responsibility for maintenance. Following acceptance for maintenance by the County of any road, the developer/owner shall be financially responsible for all maintenance necessary due to deficiencies resulting from initial construction for a period of three years. The developer/owner shall post a warranty bond or letter of credit to secure that obligation for three years from the date of acceptance. The warranty bond or letter of credit shall equal 15 percent of construction cost and shall be reviewed and approved by the County Engineer or designee. The warranty bond or letter of credit shall be maintained by the County Finance Department. The warranty bond or letter of credit shall expire after three years from the date of acceptance of the road. In order to facilitate the acceptance process, once a road has been substantially completed the developer/owner may request a written punch list from the County Engineer or designee. The punch list will note the items that must be completed prior to acceptance of the road by the County. (k)Financial liability. The owner/developer shall be responsible for all costs in the design and construction of a roa d until said road is accepted as a county road by the county. (j) Contracts. Notwithstanding any other provision of this section, the owner/developer may utilize an independent contractor to perform road work. In such case, the owner/developer shall be fu lly responsible for work performed by the contractor on said roads. (l)Road swales and channels. All roadway ditches and channels shall be designed to contain, at minimum, a peak flow from a 25-year frequency storm. All roadway ditches and channels shall b e designed so that the velocity of flow expected from a 25-year frequency storm shall not exceed the permissible velocities for the type of lining used. Rip-rap shall be placed for stops in road drainage swales as instructed by the county engineer. Swales shall be stabilized against erosion by grassing with a mixture of rye and bermuda grass, or the appropriate grass for the season. Road swales shall be installed at a maximum depth of three feet and be designed to enable mowing by adjoining property owners. (k) Financial liability. The owner/developer shall be responsible for all costs in the design and construction of a road until said road is accepted as a County-maintained road by the County. (m)Road maintenance signs. Where subdivision roads are not to be dedicated to the state or county for public maintenance the subdivider shall install signs that control traffic flow in a safe manner as specified the manual of uniform traffic control devices. Also, at the beginning of the private subdivision roads the re shall be signs which state "Private Road" The subdivider may assume the responsibility to install signs provided the county engineer approves in writing the signage. (l) Road swales and channels. All roadway ditches and channels shall be designed to co ntain, at minimum, a peak flow from a 25-year frequency storm. All roadway ditches and channels shall be designed so that the velocity of flow expected from a 25-year frequency storm shall not exceed the permissible velocities for the type of lining used. Swales shall be stabilized against erosion by grassing with a mixture of rye and bermuda grass, or the appropriate grass for the season. Road swales shall be installed at a maximum depth of three feet and be designed to enable mowing by adjoining property owners. Chapter 26 | Draft 1.7 | 14 (n)Roadside drainage. Roads may be constructed with drainage swales shoulders at a 12:1 slope. Where road grade exceeds ten percent, curb and gutter, paved drainage swales, or rip rap swales shall be provided. Curb and gutter may be roll type or standard 90 degrees curb. (m), (n) Reserved. (o)Temperature (o) Temperature and weather restriction on asphalt paving work. (1)No hot mix (1) No hot-mix asphalt surfacing work surface paving shall be performed on a wet surface, or when the temperature is below 45 degrees Fahrenheit in the shade and falling, or when weather conditions are otherwise unfavorable. No proposed County-maintained road shall have surface paving performed between October 15 and March 15 unless approved in writing by the county engineer, no surface treatment of a road planned by the owner/developer for acceptance into the county road system shall be begun before March 15 of each year. Unless approved in writing by the county engineer, surface treatment of a ro ad planned by the owner/developer for acceptance into the county road system shall be completed prior to October 15. County Engineer or designee. (2)The mixture shall be delivered to the spreader at a temperature between 225°F and 325°F and, except for san d asphalt mixture for base course construction, within 30°F of the temperature at the plant. (2) Reserved. (p)Drainage (p) Drainage structures. (1)Crossline (1) Crossline pipes shall be designed to carry runoff from a 25-year, 24-hour design storm and shall be RCP Class III concrete. storm. The design shall be determined using runoff data sources and standard methods approved by the county engineer. in SCDOT Requirements for Hydraulic Design Studies (2009 edition). In no event shall a pipe less than 18 inches in diameter be accepted by the county. County. Crossline pipes or structures along Waters of the State shall be designed to pass a 100-year, 24-hour design storm. (2)Concrete (2) Driveway culverts must conform to South Carolina Highway Department of Transportation requirements. HDPE double wall Double-wall corrugated high-density polypropylene pipe with a smooth interior pipe conforming to the requirements of American Association of State Highway Officials (AASHO) M294M, AASHTO M330, Type S pipe or an approved equivalent shall be accepted where sufficient fill over the pipe is provided. No corrugated metal pipes shall be accepted. No driveway culvert shall be less than 15 inches in diameter. (3)Unless (3) Unless approved by the county engineer County Engineer or designee prior to construction, all pipes shall be laid in a trench. All trenches shall be excavated so as to allow for safe and proper installation. All backfill work shall comply with standards specified by the pipe manufacturer; however, in no case shall backfill covering a culvert be less than ten inches deep (pavement and/or base thickness shall not be considered part of this required minimum depth). All fill shall be compacted to 95 percent of standard proctor test in the top foot of fill. maximum density. (4)The (4) The jointing of sections of culvert shall be done in a workmanlike manner in accordance with the standard practice recommended by the manufacturer of the culvert being used. (5)The (5) The ends of all pipe culverts shall be properly protected to prevent piping, erosion and scour. Placement of filter fabric and rip-rap riprap shall be considered minimum treatment. End treatments shall be approved by the county engineer County Engineer or designee and shown on the plans. (6)All (6) All crossline drainage culverts shall be located in natural drainage areas or depressions, and shall terminate in a dedicated drainage easement no less than 20 feet wide. (7)Junction (7) Junction boxes of an approved type will be constructed at all points where the line of pipe changes course or direction ten degrees or more and at proper intervals along the line of pipe. (8)A (8) A means of access to inlet and outlet points of drainage structures and appurtenances must be provided and shown on the plans. Oconee County shall not be held liable for flood damage outside recorded drainage easements. Chapter 26 | Draft 1.7 | 15 (9)Exits (9) Exits for surface water in sideline ditches shall comply with the standards put forth in the following table: Table—Surface Water Exit Intervals Road Grade Maximum Exit Interval 0—2 percent 800 feet 2.1—4 percent 700 feet 4.1—6 percent 600 feet 6.1—8 percent 500 feet 8.1—10 percent 400 feet 10.1—12 percent 300 feet More than 12 percent 200 feet Road Grade Maximum Exit Interval 0—2 percent 800 feet 2.1—4 percent 700 feet 4.1—6 percent 600 feet 6.1—8 percent 500 feet 8.1—10 percent 400 feet (10)Exit (10) Exit intervals for surface water along curb and gutter roads, also known as catch basin spacing, shall be designed to limit the spread to seven feet from the face of curb. The two -year design storm shall be the basis for determining the stormwater runoff. In no case shall the spacing exceed 800. 800 feet. Special attention should be used given to designing exits at cul-de-sacs, to prevent overtopping the curb and catch basin. (q)Sidewalks (q) Sidewalks are only permitted in county County rights-of-way when they meet the following conditions: (1)A (1) A financially responsible entity, as determined by the county County in its sole discretion (the "responsible entity"), agrees to perform necessary maintenance and repair to the sidewalk and accepts all real and potential liability arising from the existence and use of the sidewalk. The responsible entity must, prior to sid ewalk construction, enter into an agreement with the county County that establishes the responsible entity's maintenance, repair, and liability obligations. These obligations will include the duty to defend and hold the county County harmless from any damages or claims for damages in any way related to sidewalk construction, maintenance, and repair. (2)The (2) The sidewalk shall be designed by a professional engineer, licensed in the State of South Carolina, to meet the most recent applicable South Carolina Department of Transportation ("SCDOT") minimum standards and Chapter 26 | Draft 1.7 | 16 be in a form consistent with all applicable SCDOT standard drawings. The sidewalk shall be constructed in strict compliance with the approved design. Sidewalk design and construction must be tim ely submitted for approval by appropriate county County personnel. (3)Necessary (3) Necessary maintenance and repair of the sidewalk will be performed expeditiously and in a manner consistent with the most recent applicable SCDOT minimum design standards a nd standard drawings. (r)Sidewalks are only permitted in private rights-of-way when they meet the following conditions: (r) Reserved. (1)A financially responsible entity, as determined by the county in its sole discretion (the "responsible entity"), agrees to perform necessary maintenance and repair to the sidewalk and accepts all real and potential liability arising from the existence and use of the sidewalk. (2)The sidewalk shall be designed by a professional engineer, licensed in the State of South Car olina, to meet the most recent applicable South Carolina Department of Transportation ("SCDOT") minimum standards and be in a form consistent with all applicable SCDOT standard drawings. The sidewalk shall be constructed in strict compliance with the approved design. Sidewalk design and construction must be timely submitted for approval by appropriate county personnel. (3)The final plat submitted for approval and recordation must include the following: "THE SIDEWALK LOCATED IN THE RIGHT-OF-WAY SHOWN ON THIS PLAT SHALL BE PRIVATE, NOT OWNED, MAINTAINED, OR OVERSEEN BY OCONEE COUNTY, AND NOT CONSTRUCTED PURSUANT TO ANY PLAN FOR FUTURE ACCEPTANCE BY OCONEE COUNTY. SIDEWALKS IN RIGHTS-OF-WAY SHOWN UPON THIS PLAT SHALL NOT BE ACCEPTED FOR MAINTENANCE BY OCONEE COUNTY AT ANY TIME IN THE FUTURE. MAINTENANCE OF THE SIDEWALK SHALL BE THE RESPONSIBILITY OF _______." (4)Necessary maintenance and repair of the sidewalk will be performed expeditiously and in a manner consistent with the most recent applicable SCDOT minimum design standards and standard drawings. (Ord. No. 2008-19, Art. 3(1—17), 12-16-2008; Ord. No. 2010-17, § 2A, 9-21-2010; Ord. No. 2022-23, §§ A, B, 10-18- 2022) Sec. 26-4. Commercial and industrial roads and streets. Reserved. (a)In addition to residential road requirements set forth, the following standards shall apply to commercial and industrial roads. (1)Rights-of-way and road widths. The following right-of-way and road widths are established: a.Right-of-way: Minimum width is 66 feet. b.Roadway width: Width is 24 feet with 12-foot lanes plus two-foot valley gutters or six-inch high curbing and two- foot concrete valley on each side. (2)Grades. a.The minimum grade shall not be less than one percent and the maximum shall not be more than seven percent. b.All proposed street grades, when intersecting an existing street or highway, shall be constructed so as to meet the same horizontal grade at the existing intersection and shall have an elevation for a distance of 30 feet equal to the curb line grade of the existing street to which the proposed connection is being made. All proposed street connections to existing streets or highways having existing sidewalks crossing their intersection alignment shall be constructed by removal of the sidewalk to the new proposed curb radii. (3)Horizontal (circular) curves. Where a deflection angle of more than five degrees in the alignment of the street occurs, the right-of-way shall be curved. The minimum horizontal radius of curvature at the centerline of the proposed street right-of-way shall not be less than 250 feet. Chapter 26 | Draft 1.7 | 17 (4)Vertical (crest-sag) curves. Changes in vertical grade shall be connected by vertical curve s of minimum length equal to 25 times the sum of both approaching grades stated in percent of grade. Example: A five percent slope upward meeting a four percent slope downward requires a curve length of 9 x 25 = 225 feet. (5)Intersecting roads and road offsets. a.Intersecting roads. Industrial/commercial roads shall be laid out so as to intersect as nearly as possible at right angles and no road shall intersect any other road at an angle less than 80 degrees. b.Road offsets. Where there is an offset in the alignment of a road across an intersection, the offset of the centerline shall be not less than 200 feet. (6)Cul-de-sacs. The circular right-of-way radius shall be 66 feet and paved turning circle with the same center point and a radius of 50 feet is required. (7)Temperature and weather restrictions on asphalt paving work. a.No hot mix surfacing work shall be performed on wet surface, or when the temperature is below 45 degrees Fahrenheit in the shade and falling, or when weather conditions are otherw ise unfavorable. Unless approved in writing by the county engineer, no surface treatment of a road planned by the owner/developer for acceptance into the county road system shall be begun before March 15 of each year. Unless approved in writing the county engineer, no hot mix surface treatment of a road planned by the owner/developer for acceptance into the county road system shall be done after October 15. b.The mixture shall be delivered to the spreader at a temperature between 225 degrees Fahrenheit and 325 degrees Fahrenheit and except for sand asphalt mixture for base course construction, within 30 degrees Fahrenheit of the temperature at the plant. (Ord. No. 2008-19, Art. 4(1—7), 12-16-2008) Sec. 26-5. Road upgrades. (a)Upgrade (a) Upgrade of existing county County roads. (1)Roads owned and/or maintained by the county shall be listed on a road maintenance plan maintained by the county road department. Any road not meeting the current standards for public roads as adopted by the c ounty shall be identified. Those roads that do not meet the current county standards and are in the primary development areas identified on the county future land use map shall be placed on the priority upgrade list. A rating system shall be used to prioritize the roads on the priority upgrade list, with those roads receiving the highest score having the highest priority. Until the county future land use map is amended in 2009, primary development areas shall include those areas identified in the comprehensive plan defined as residential areas and transitional growth areas. (1) Roads owned or maintained by the County shall be listed on a priority upgrade list or a road maintenance plan maintained by the Oconee County Roads and Bridges Department. A rating s ystem shall be used to prioritize roads on the priority upgrade list, with roads receiving the highest score having the highest priority. (2)Roads (2) Roads on the priority upgrade list shall be upgraded in such a manner as to account for the current and projected traffic levels. These projections shall be based upon the best information available and anticipate changes occurring over the next 25-year period. (3)The (3) The following rating factors shall be used in determining the priority upgrade list: a.Condition a. Condition and width of driving surface; b.Existing b. Existing hazards; c.Right-of way c. Right-of-way acquisition; and d.Current d. Current and projected traffic levels. (4)County roads (whether (4) County roads, whether paved or gravel) gravel, that are located outside the primary development areas as identified in the county County future land use map may be placed on the priority upgrade Chapter 26 | Draft 1.7 | 18 list based on the upon recommendation of the county engineer County Engineer or designee and the agreement of the council's transportation committee. Oconee County Council Transportation Committee. (5)The county engineer shall review all roads within the county road system on an annual basis and make recommendations to the county planning commission regarding changes to the priority upgrade list. The planning commission shall review the priority upgrade list on an annual basis and make recommendations to county council for changes to the list. The county engineer shall estimate a projected completion date for all roads on the Priority Upgrade List. The county engineer shall update the projected completion date on an annual basis. The county engineer shall consider available funding sources in making these completion projections. (5) The County Engineer or designee shall review all roads within the County road system and make recommendations to the Planning Commission regarding changes to the priority upgrade list at the time of adoption or update of the Comprehensive Plan. (6)In the event that a developer/subdivider is required to upgrade a county road in the primary development area, in accordance with section 26-5(b) of this article, the county and the developer/subdivider shall enter into a reimbursement agreement. The reimbursement agreement shall allow the developer/subdivider to receive reimbursement for the total cost of upgrading the road to the minimum county road standard. The cost of upgrading a county road may include the cost of right-of-way acquisition and the moving of existing utilities. The cost of upgrading the road shall not include the upgrade of utilities within the road right -of-way. The source for reimbursement shall be from rollback taxes, if any, and the incremental tax increase of property resulting from New Development accessed by the upgraded road. The reimbursement agreement shall include not more than ten percent of any rollback taxes on the property to be developed and such percentage of said incremental tax increase sufficient to allow the developer/subdivider to receive reimbursement for his/her/its total cost in upgrading the road over a period of time not to exceed ten years from the date that the county approves the final plat and the plat is recorded. Any reimbursement agreement shall only include the county portion of any rollback tax or incremental tax increase. (6), (7) Reserved. (7)A developer/subdivider who is planning a development that will impact a county road in such a way that the road classification will change, and said road is already scheduled to be upgraded by the county within the next five years, according to the Priority Upgrade List, may be assigned a higher priority on the Priority Upgrade List by agreeing to allocate ten percent of the proposed development for affordable housing or provide the same amount of affordable housing in another location in the county. Affordable housing provided in this sect ion shall be of the same type of construction (ex. stick built, modular, etc.) as the new development. (b) Impact on existing road system. In order for the County to approve a subdivision or land development, the County road or network of County roads serving the proposed development must be adequate to accommodate the increase in traffic resulting from the development. For a development consisting of 11 or more lots, dwelling units, or other units of development, the developer shall submit a traffic impac t/road capacity study prepared by a qualified professional demonstrating that the County road or network of County roads serving the proposed development can adequately accommodate the traffic generated by the proposed development. The County Engineer or designee may require a traffic impact/road capacity study for other developments when, based upon the location, proposed use, anticipated traffic generation, existing road conditions, or other relevant factors, such a study is necessary to determine the adequacy of the existing road system. The extent of the study shall be determined by the County Engineer or designee on a case-by-case basis. The study shall be reviewed and approved by the County Engineer or designee prior to development approval. If the Cou nty Engineer or designee determines that the development will increase average daily traffic (ADT) on a County road to the extent that the road will need to be upgraded to safely accommodate the increased traffic, improvements shall be made in accordance w ith the applicable road classification and standards in this chapter. The developer shall be responsible for all costs, including right-of-way acquisition, necessary to upgrade the road. (b)Impact on existing roads system. In order for the county to approv e a subdivision site plan, a subdivision plat or a building permit for a subdivision project, the county road or network of county roads that serve said proposed Chapter 26 | Draft 1.7 | 19 development must be adequate to accommodate any increase in traffic resulting from said propos ed development. For all developments consisting of more than ten dwelling units, the developer/subdivider shall submit a traffic impact/road capacity study demonstrating the impact of traffic upon any county road servicing the subdivision, either directly or indirectly. The extent of the study shall be determined by the county engineer on a case by case basis. The traffic impact/road capacity study shall be reviewed by the county planning director and the county engineer. In the event that the county planning director and the county engineer determine that the subdivision will increase the average daily traffic (ADT) on a county road to the extent that said road will need to be upgraded to safely accommodate the increase in traffic, improvements to the road must be made in accordance with the road classification set forth in the definitions section of the land development and subdivision regulations ordinance (Ordinance 2008-20 [as codfied in chapter 32, article VI, §§ 32-211—32-226]). The developer/subdivider shall be responsible for all costs (including right-of-way acquisition) necessary to upgrade the road. (c) Criteria for road improvement projects. (c)Criteria (1) A minimum of 50 feet of right-of-way is required for road improvement projects. the entire road. (1)A minimum of 50 feet of right-of-way is required for (2) Utilities must not be located, to the entire road. extent practicable, beneath the road surface (excluding sanitary sewer). (2)Utilities must not be located, to (3) A minimum 50-foot radius of right-of-way is required for the extent practicable, beneath the road surface (excluding sanitary sewer). purpose of constructing an appropriate turnaround for improvement projects along terminating roads. (3)A minimum of 50 feet radius of right-of-way is required for (4) Road improvement projects shall match existing County standards, to the purpose of constructing an appropriate turnaround for improvements projects along terminating roads. extent practicable. (4)Road improvement projects to match existing county standards, to the extent practicable. The above criteria shall apply to paved and unpaved road improvement projects. From time to time, council may need to waive the above requirements on a case-by-case basis. (d)Scoring (d) Scoring gravel roads. (1)A (1) A trip generation prediction will be calculated with data collection and other methods outlined by the Institute of Transportation Engineers. (2)ADT (2) ADT (Modeled or Measured Average Daily Trips) will be combined with safety Parameters parameters as follows: Slope or grade X 20 points Intersection X 20 points Width X 20 points No Cul-de-sac X 20 points Alignment X 20 points Slope or grade X 20 points Intersection X 20 points Width X 20 points Chapter 26 | Draft 1.7 | 20 Slope or grade X 20 points No Cul-de-sac X 20 points Alignment X 20 points (3)ADT (3) ADT and safety parameters will be the primary factors in scoring gravel roads. (4)For (4) For example, if traffic counts were measured to be 480 ADT; and the slope exceeded 12 percent, it percent; the intersection is in compliance; the road was 20 feet, and feet wide; the road had no cul-de-sac cul-de- sac; and the road alignment met standards, the score would equal 480 + 60 = 540. (Ord. No. 2008-19, Art. 5(1—4), 12-16-2008) Sec. 26-6. Acceptance of roads into county County road system. The following provisions shall apply to the construction of any road intended (a) Eligibility for future acceptance into the county road system. acceptance. (1)No road shall be accepted by the county for maintenance and incorporated within the county road system unless the same be shown and delineated upon a plat of survey duly recorded in the office of the county Register of Deeds. (1) Roads eligible for acceptance shall be collector roads or higher that bene fit network connectivity by facilitating movement through the County transportation network rather than primarily providing access to individual developments or properties. Road design classifications are set forth in section 26 -3(e). (2)A construction plan with sufficient detail, including a cross section of the proposed road, shall be submitted to the county engineer prior to commencement of construction. No construction shall commence unless the plan has been approved by the county engineer. (2) Roads whose principal purpose is to provide direct access to individual developments or properties, serve internal subdivision circulation, or function as local access roads shall not be eligible for acceptance. Roads serving County-owned public facilities may be considered for acceptance regardless of functional classification when County Council determines that they serve a public purpose. (3)A deed granting a right-of-way as specified in this article shall be tendered to the county by the property owner/developer before a road shall be accepted into the county road system. Upon acceptance of such deed or right-of-way by the county, the owner/developer shall be notified in writing of the fact of such acceptance, and the same writing shall constitute an agreement on the part of the county to maintain and incorporate the said road into its system. The county administrator shall accept or deny the proffered deed or right -of-way for the county upon receipt of certification by the county engineer that said road has bee n constructed in accordance with the regulations set forth in this article. (3) A road shall meet the requirements of section 26-3 and the Transportation Element of the most recently adopted Oconee County Comprehensive Plan. The road shall connect by an a pproved connection to at least one federal, state, County, or municipal public road. (4)Prior to acceptance by the county for maintenance and incorporation within the county road system, all roads shall meet all road construction standards set forth in this article. (b) Road status and acceptance. A road shown on a subdivision plat or lan d development plan shall be identified as a proposed County road, a private road, or a private road planned for possible future County acceptance. A final plat for the latter shall include the notice required by chapter 32. Approval of a subdivision, devel opment plan or plat, permit, road construction plan, inspection, professional certification, or dedication shown on a plat shall not Chapter 26 | Draft 1.7 | 21 constitute County acceptance of a road, easement, or other property interest. Compliance with applicable construction standards establishes no entitlement to acceptance. (5)No road shall be accepted into the county road system until the surface is treated in a manner and using such materials as approved by the county engineer. The county engineer shall furnish specification re quirements upon request. The county engineer shall be notified by the developer/owner prior to the commencement of any construction, and shall be given periodic progress reports and periodic inspection reports as specified by the county engineer. Such progress and inspection reports are to include notification of the ending and planned commencement of construction intervals or phases. The county engineer shall certify in writing to county council that the road to be accepted into the county road system has been constructed in accordance with the regulations set forth in this article. A copy of the certification shall be sent to the county administrator. (c) Construction plans and application. (6)The county may accept a road as a county road through the creation of a special tax district, a legislatively created administration division of the county whereby resident freeholders fund, through the collection of uniform fees included on the annual property tax bill, upgrades to existing private roads in order for such roads to meet the standards of and for the purpose of acceptance into the county road system. (1) Before construction begins, the owner or applicant shall submit construction plans wi th sufficient detail, including a cross section of the proposed road, to the County Engineer or designee. No construction shall commence until the County Engineer or designee has approved the plans in writing. The owner or applicant shall notify the County Engineer or designee before construction and provide weekly progress and inspection reports, including notification of the ending and planned commencement of construction intervals or phases. (7)No expenditures of any public funds shall be made on any roa d or right-of-way, which has not been accepted as a county road. (2) To request acceptance, the owner or applicant shall submit an application to the County Administrator with a survey plat duly recorded in the office of the Register of Deeds, the propose d conveyance instrument, approved construction plans, sealed as-built plans, material and compaction test results, drainage information, required certifications, and evidence of compliance with applicable phasing and security requirements. (8)The roadway must connect to at least one federal, state, county, or municipal roadway. (d) Engineering review. (9)The county administrator is hereby authorized to accept roads and rights -of-way on behalf of county. (1) Before consideration for acceptance, the road, drainage facilities, rights-of-way, utilities, and related infrastructure shall be inspected by a professional engineer licensed in South Carolina and retained by the owner or applicant, and by the County Engineer or designee. The project engineer shall pro vide written certification that the road and associated improvements have been constructed in compliance with approved plans, County specifications, and applicable provisions of this chapter. (2) The County Engineer or designee shall verify prior construction-plan approval and receipt of required inspection notices, conduct a final acceptance inspection, and issue a written certification recommending acceptance or denial. A prior approval or inspection of a private road does not replace the final acceptance inspection. (3) The County Engineer or designee may require drainage calculations, geotechnical reports, pavement core samples, or other documentation necessary to verify compliance. Deficiencies identified during inspection or review shall be corrected by the owner or applicant before consideration by County Council. An application lacking required documentation shall not be placed on a County Council agenda for consideration. (e) Property and maintenance review. The County Attorney shall review the propo sed deed, easement, or other instrument conveying the property interest required for the intended public use. The owner or applicant shall formally offer dedication, tender the required instrument, and provide the maintenance security required by section 26-3(i). The County Administrator shall submit the complete application, engineering certification, property-interest review, maintenance and fiscal assessment, and written recommendation to County Council. Chapter 26 | Draft 1.7 | 22 (f) Council action. The County shall not accept a private road if the right-of-way proposed for acceptance would cause any lot or development to fail an applicable setback or density standard under chapter 38. County Council may accept or deny an eligible road after considering its condition and function, connectivity, public need, property interest, drainage, long-term maintenance obligation, and available resources. Acceptance shall be approved at a duly called meeting and evidenced by a separate written action of County Council identifying the road, accepted property interest, effective date, and any lawful condition. After that action, the County Administrator may execute and record the conveyance and implementing instruments in the office of the Register of Deeds within the scope of Council's authorization. The County shall give the applicant written notice and maintain the Council action, conveyance, plat, plans, inspection record, and certification as permanent road - system records. (g) Costs and responsibility. All costs associated with engineering review, inspections, testing, certifications, corrective work, legal documentation, recording fees, and other activities necessary for acceptance shall be borne by the owner or applicant. County review, inspection, testing, or approval shall not constitute a cceptance or a warranty by the County regarding the quality, safety, or durability of the road or related infrastructure. Acceptance remains within the sole discretion of County Council. County road funds shall not be expended to improve or maintain a private road before acceptance except as otherwise authorized by law. (Ord. No. 2008-19, Art. 6, 12-16-2008) Sec. 26-7. Regulating the use of county County roads. (a)Connection to, or easements or rights-of-way on county roads. Notwithstanding any other provision of this Code, all connections to county roads, whether temporary or permanent, such as, without limitation, driveway cuts, logging or construction cuts, roadway intersections, and every other form of connection, must be approved in writing, in advance of any such connection, temporary or permanent, by the county engineer, in accordance with subsection 26-3(e)(10) hereof. (a) Connections and property interests. A temporary or permanent connection to a County road, including a driveway, logging entrance, construction entrance, or road intersection, requires prior written approval from the County Engineer or designee and any permit required by subsection (e). The County Engineer or designee shall consider sight distance, drainage, spacing, traffic, road condition, and safe operation. The County may authorize an encroachment only within the scope of its property interest. A conveyance of a County real -property interest requires the governing-body action and procedure required by law. The county County may only authorize encroachments or grant easements or rights-of-way, for any purpose, on those county County roads for which it owns the right to do so, such as on rights-of-way deeded to the county County in fee simple title. For other roads, such as those for which the county County owns less than fee simple title, such as roads for which the county County has only prescriptive easements, the county County may only grant encroachments, easements, and rights-of-way consistent with its interests. Any encroachment, easement or right-of-way granted by the county County on a county County road must be approved in writing by the county engineer County Engineer or designee after making a full investigation of the matter and considering all factors, including the applicant's needs, as well as the needs of the county, County, including, without limitation, good engineering standards, the need to maintain county County rights-of-way and keep them open, the convenience of the traveling public, and other similar professional considerations. If the county engineer County Engineer or designee approves such encroachments, easements, or rights-of-way, the easements or rights-of-way may only be granted by county council, County Council, by ordinance, following a public hearing as a conveyance of interests in real property. The county engineer County Engineer or designee may approve encroachments properly undertaken in accordance with this chapter. (b)Work (b) Work on county County right-of-way. Property owners adjoining the county County road right-of-way may request that the county County perform work within the right-of-way to install new driveway aprons, mailbox turnouts, and/or culverts within the county maintained County-maintained right-of-way. The county, County, at its sole discretion, may elect to perform such work on a first pay, first scheduled, time -available basis. If the county Chapter 26 | Draft 1.7 | 23 County performs such work, the property owner shall pay 2.5 times the material costs to cover the material cost and labor for said project. The property owner shall sign a hold harmless agreement releasing the county County from any liability associated with said work, in advance of scheduling the project. If the county County constructs such driveway aprons, mailbox turnout, or culverts within the county County right-of-way, such work will be maintained by the county County as a part of the county County road system from that point. The county engineer, County Engineer or his designee will provide a nonbinding, nonbinding cost estimate for the material cost of the project. Special services or equipment needed to complete the job will be billed as invoiced by the contractor or vendor providing the special service or equipment. (c)Drainage. (c) Drainage. (1)Property (1) Property owners adjoining the road right-of-way may request that the county County perform work to assist the property owner with a drainage problem. The county County may, at its sole discretion, construct berms, swales and/or ditches, or install pipe along the county maintained County-maintained road right-of-way. The property owner shall pay 2.5 times the material costs to cover the material cost and labor for said project. The property owner shall sign a hold harmless agreement releasing the county County from any liability associated with future drainage problems, in advance of the county County considering and scheduling such project. Such projects will be scheduled, if at all, on a first pay, first scheduled, time-available basis and will be maintained by the county, County, as a part of the county County road system from that point. (2)The county engineer (2) The County Engineer or his designee, designee will provide a cost estimate for the material costs of the project. Special services or equipment needed to complete the job will be billed as invoiced by the contractor or vendor providing the special service or equipment. (3)The county (3) The County cannot assist in any drainage matter outside of the road right-of-way, and may only perform work within the county County right-of-way. (4)No (4) No property owner or any other person shall modify any drainage in any manner that affects a county County road without the written approval, in advance, of the county engineer. County Engineer or designee. (d)Damages. (d) Damages. (1)Any (1) Any person, entity or utility that engages in an activity which causes damage to a county County road or road structure shall be responsible for repairing said county County road or road structure to SCDOT standard specifications for highway construction. This does not include normal wear and tear to a road caused by normal use of said road. (2)Any (2) Any person driving, operating or moving any vehicle, object or contrivance upon any county County road or road structure shall be liable for any damage which road or structure may sustain as a result of dragging, scraping, breaking or any other damage done to said road or structure. Any such persons will also be liable to the county County for the cost of such injury or damage. (e)Encroachment. (e) Encroachment. (1)All (1) All persons desiring to excavate within, encroach upon, or in any way alter a county maintained County- maintained road and/or right-of-way, shall notify the county engineer County Engineer or designee and submit to the county County road department an application for an encroachment permit, together with the required fees and security as determined and established periodically by county council. County Council. Notice will be given by the applicant to the county County at least 48 hours prior to initiating such work, and only after receiving an approved permit from the county. County. A schedule of required fees and securities shall be available for review from the county County road department. No person may excavate within, encroach upon, or in a ny way alter a county maintained County-maintained road or right-of-way without the written approval, in advance, by approved permit, of the county engineer. County Engineer or designee. In determining whether to approve any such request, and issue a permit, the county engineer County Engineer or designee will consider all factors, including the needs of the applicant, as well as the needs of the county, County, including, without limitation, good engineering standards, the need to maintain county County rights-of-way and keep them open, the convenience of the traveling public, the applicant's compliance with previous permits, including temporary permits, and policies of the Chapter 26 | Draft 1.7 | 24 county, County, and other similar professional considerations, including, without li mitation, the provisions of the encroachment permit policy (encroachment permit policy) which is maintained by the Oconee County Road Roads and Bridges Department and approved by county council County Council from time to time and is included herein by reference. The county engineer County Engineer or designee may impose restrictions on any granted approval and permit under this section, consistent with such professional considerations; including, without limitation, up to and including temporary suspension or permanent revocation of such permit, for failure to comply with the permit terms or these policies. Any appeal from any Utilities within a County road right-of-way shall comply with section 26-3(e)(11). Crossings and service stub-outs needed to avoid future pavement cuts shall be installed before final surfacing. Such work requires the permit and approval required by this s ubsection. A person aggrieved by a final written decision of the county engineer County Engineer or designee under this subsection may seek administrative review under section will be treated as a request for a variance from road standards and handled in accordance with the procedures of section 26-8 of this Code. 26-8. Oconee County Council shall, from time to time, approve the county's County's encroachment permit policy, including, without limitation, the policy itself, as well as the encroachment permit application form, and the schedule of fees for the application of the policy. The initial encroachment permit policy, encroachment permit application form, and fee schedule are attached as exhibits to this section, and are hereby approved. For minor nonsubstantive revisions, the county, County, acting by and through the county council, County Council, may revise the policy, application form, or fees, as it desires, in the future by simple resolution of county council, County Council, and may include the fees schedule in the schedule of departmental fees that is contained in a proviso in the annual county County budget ordinance. More substantial, substantial revisions and all substantive revisions to policy, application form, and fees must be revised by county council County Council ordinance, including, without limitation, the annual county County budget ordinance. (2)Upon (2) Upon completing the permitted activity, the applicant shall restore the county maintained County- maintained road and/or right-of-way to its original condition (except for any permanent alteration approved by county County permit, and through a county-granted County-granted right-of-way or easement), insuring ensuring that all repairs conform to the requirements contained in the SCDOT s tandard specifications for highway construction and the encroachment permit policy. Eighteen months after the permitted activity is satisfactorily completed, the security shall be returned to the applicant provided the county engineer, County Engineer or designee, upon final inspection, approves the repair. If the county engineer County Engineer or designee deems the repair to be unacceptable, the security shall be retained by the county County and used to properly repair and restore the road and/or right-of-way to its original condition. Once the road and/or right -of-way has been properly repaired, any excess security will be returned to the applicant, it being understood that, in one form or another, all costs of encroachment upon, or any alteration of a county maintained County-maintained road or right-of-way shall be borne by the applicant. (3)Driveway (3) Driveway aprons and mailbox turnouts abutting county maintained County-maintained roads are encroachments, subject to the provisions of this section, and will be the responsibility of the property owner, as to construction and maintenance, subject to the provisions of subsection 26 -7(b), and subject to the caveat that if the county County constructs or manages a road project, driveway aprons and mailbox turnouts may be part of the project, subject to the terms of such subsection 26-7(b). (4)Violation (4) Violation of the encroachment permit policy is a violation of this Code and is punishable by civil fine of $500.00/day/violation. Each and every day of a continuing violation shall be deemed a new and separate offense. Failure to pay any civil fine levied hereunder shall constitute a violation of this Code and shall be punished in accordance with section 1-7, hereof. (f)Road (f) Road safety. (1)All (1) All persons shall park vehicles and equipment at least three feet from the edge of the driving surface on all roads. Parked vehicles and equipment shall not block ditches and swales or in any way inhibit drainage. (2)No (2) No person shall place any type of material within three feet of the driving surface. Chapter 26 | Draft 1.7 | 25 (3)No (3) No person shall place a sign on a road in the county County that will restrict visibility or inhibit sight lines of drivers. (4)Signs (4) Signs (other than these those regulated by state or federal law, such as political signs) remaining in place for more than seven days on county roads, County roads will require an encroachment permit from the county County road department. (g)Inspections. (g) Inspections. A developer/owner developer, owner, or any other affected entity shall notify the county engineer County Engineer or designee at least 48 hours prior to any before a requested inspection required by this chapter for public work on a County road or private roads. its right-of-way or for a road proposed for County acceptance. Inspection fees, for such inspections, fees shall be established by resolution, ordinance ordinance, or other official act of county council from time to time, County Council and must shall be paid, paid in full, full before the county will finally accept the road(s) in question. All such fees, once paid, acceptance. Fees shall be maintained by the county in a separate account used only for the County road inspection program of the county, and will only shall be in such amount(s) as will be limited to amounts sufficient to maintain such that program. Work done prior to performed before inspection is done undertaken at the contractor's and owner's own risk and may, upon decision of the county engineer County Engineer or designee, be required to be removed and redone or have the quality substantiated by any necessary tests deemed necessary, all at the contractor's and/or or owner's sole expense. Inspections Inspection stages for road construction are set forth in section 26-3(h). Inspection of a private road under a subdivision or land development approval shall be required for the following: governed by chapter 32. (1)At the completion of clearing and grubbing operations; (h) Penalties. Failure to comply with any of the requirements of this article constitutes a misdemeanor and shall be punishable as set forth in section 1-7. In addition, in the event that the County must file a civil suit in order to enforce its rights under this article, the County shall be entitled to reasonable attorney's fees. (2)At the completion of rough grading; (3)At the completion of all utility construction along road right -of-way (including but not limited to water, sewer, electrical); (4)At the completion of subgrade; (5)After installation and compaction of base course; (6)During all pavement applications; and (7)At final acceptance inspection. (h)Penalties. Failure to comply with any of the requirements of this article cons titutes a misdemeanor and shall be punishable as set forth in section 1-7. In addition, in the event that the county must file a civil suit in order to enforce its rights under this article, the county shall be entitled to reasonable attorney's fees. (Ord. No. 2008-19, Art. 7(1—5), 12-16-2008; Ord. No. 2010-17, § 2B, 9-21-2010; Ord. No. 2013-16, § 2B, 7-16-2013) Editor's note(s)—The Oconee County Roads and Bridges Department Encroachment Permit Application and Policy are incorporated herein by reference as if fully set out at length. A copy is on file and available for inspection at the offices of the county. County. Sec. 26-8. Variance from road standards. Technical modifications and administrative review. (a)Any variance from these road standards shall be consistent with the intent of this article, and shall be approved in writing by the board of zoning appeals. Any person or entity requesting a variance from road standards shall submit a written request for a variance to the planning director of the count y. A variance can only be granted for actions to take place in the future. No variance may be granted for past actions. (a) Applicability. This section governs technical modifications and administrative decisions concerning roads subject to article I, division 1, of this chapter. Appeals from staff approval or denial of a subdivision or land Chapter 26 | Draft 1.7 | 26 development plan or plat shall be governed by chapter 32 and applicable state law. Appeals involving non - subdivision performance standards shall be governed by chapter 32, and zoning appeals and variances shall be governed by chapter 38 and applicable state law. Appeals of addressing decisions shall be governed by section 26 - 109. (b)Prior to scheduling a variance hearing before the board of zoning appeals, the person or entity requesting said variance shall work with the county planning department and the county road department in an effort to eliminate or minimize the need for a variance. After reasonable efforts and no other solution can be reached, a hearing shall be scheduled before the board of zoning appeals. The county staff shall submit written reports to the board of zoning appeals setting forth the county regulation in question, the efforts made to remedy the situation, and a recommendation setting forth the county's position regarding the variance. These written reports shall be submitted to the person or entity requesting the variance at least five days before the varianc e hearing. (b) Technical modification. Before work begins, an applicant may request a written modification of a road design or construction detail. The County Engineer or designee may grant the request only upon written findings that a site - specific condition makes strict compliance impracticable and the alternative provides equal or greater safety, drainage performance, durability, and serviceability. The applicant shall submit the affected provision, plan, proposed alternative, and sealed professional analysis. A modification shall not waive state or federal law, convey a property interest, accept a road, shift an unapproved maintenance cost to the County, or excuse completed noncompliant work. (c)Notice of the variance hearing shall be provided by first-class mail to the person or entity requesting the variance at least 15 days prior to the hearing. Notice of the hearing shall also be published in a newspaper of general circulation in the county at least 15 days before the hearing. (c) Decision and record. The County Engineer or designee shall issue a written decision stating the facts, findings, applicable conditions, and duration. The decision and supporting materials shall be maintained with the plan or permit file. (d)Any party may be represented by counsel. Any person or entity that would be directly impacted by the granting or denial of the variance may participate as a party in the hearing, provided notice of intent is submitted in writing to planning department at least seven days prior to the hearing. The planning department shall immediately notify all other parties of the new party's participation. The county may support or oppose the variance request or be neutral. (d) Appeal of decision. A person aggrieved by a final written decision of the Co unty Engineer or designee under this section or section 26-7(e) may appeal to the Planning Commission by filing a written notice of appeal with the Planning Director within ten days after actual notice of the decision. The notice shall identify the decisio n appealed and state the grounds for appeal. The County Engineer or designee shall transmit the decision and supporting record to the Planning Commission. The Planning Commission shall hear the appeal and may affirm, reverse, modify, or remand the decision in accordance with the standards of this chapter. The Planning Commission shall issue a written decision stating the basis for its action. An appeal from approval or denial of a subdivision or land development plan or plat shall be governed by chapter 32. A request under this section shall not be routed to the board of zoning appeals solely because it seeks relief from a road standard. (e)The board shall make the initial determination concerning the variance request and may consider any and all evidence it deems relevant concerning the variance issue. The paramount issue for all variance requests shall be the reasonable safety of the road under the proposed circumstances. If the board concludes that a safe road can be constructed without strict application of the regulations set forth in this article or other county ordinances and policies, the board may then consider issues such as the cost of right-of-way acquisition, placement of utilities, and unusual circumstances in determining whether to grant a variance. The board should use reasonable discretion in its decision making. (f)A person or entity whose request for a variance has been denied by the board may appeal the board's decision to the transportation committee of the county council. Chapter 26 | Draft 1.7 | 27 (Ord. No. 2008-19, Art. 8, 12-16-2008) Sec. 26-9. Road closure and abandonment. (a)Prior to any request for abandonment and closure of an Oconee County public road being brought before county council, county staff, including, without limitation, the Oconee County Roads a nd Bridges Department, will conduct a thorough investigation, adequate to determine: whether the road in question is, or ever has been, a county road; whether the road still is a county road; whether the road is still in general public use or has been practically abandoned; whether the county has any documentation relating to the status of the road, such as a dedication of right-of-way or easement, or a deed, or whether such road was subject to a prescriptive easement or easement by usage; whether there is any other information which would assist county council in determining whether the best interests of the Oconee County public will be served by consenting to the abandonment and closure of the road in question or by not so consenting. As a part of the inve stigatory process addressed herein, the Oconee County Roads and Bridges Department will post, adjacent to the road in question, a sign, marked so as to be as conspicuous as possible, prominently providing notice that the road, or portion thereof abutting t he sign, is proposed for abandonment and closure, soliciting citizen comments concerning such proposed abandonment and closure, and providing notice of address and telephone number at the Oconee County Public Works Department to which concerned citizens may forward comments concerning such proposed abandonment and closure. (b)Following the investigation referred to in paragraph 1, supra, county staff will make a recommendation to the Transportation Committee of Oconee County Council, which, in turn, will ma ke a recommendation to Oconee County Council as to whether the request for abandonment and closure should be honored or not, and provide the results of the staff investigation to county council for its use and final determination whether the county will consent to such abandonment and closure. Included with the recommendation will be any public comments received and the recommendation(s) of county staff and the transportation committee. (c)County council shall then, in public meeting, make a determination as to whether the request for abandonment and closure should be consented to by the County, acting by and through county council, and shall signify its decision by motion, if such decision be negative, and shall signify its decision by resolution of county council, if such decision be positive. (d)If county council consents to the abandonment and closure of a county public road, as addressed herein, the resolution of county council consenting to such abandonment and closure shall state, with particularity, t he road, or section thereof, to be closed; the basis for county council's decision to consent to the abandonment and closure of the road; and the absolute requirement that, prior to the road, or portion thereof, in question being closed, the primary private party(ies) in interest (unless the county, itself, is the party requesting the road closure, in which case the county will be the primary party in interest to comply with this section) shall fully comply with all applicable law, including, without limitation, S.C. Code 1976, § 57-9-10, as amended, and shall provide all required notice and service of process. Only upon the meeting of such conditions and the fulfillment of such procedures will the county council consent to such abandonment and closure be co nsidered final, and that shall be stated in such resolution. (Ord. No. 2010-28, §§ 1—5, 10-19-2010) Sec. 26-10. Legal provisions. (a)These regulations expressed in this article shall be considered as the minimum provisions for the protection of the health, safety, economy, good order, appearance, convenience, and welfare of the general public. (b)Conflict with other laws, ordinances, or regulations. Whenever the requirements made under authority of these regulations impose higher standards than are required in any statute or local ordinance or regulation, provisions of these regulations shall govern. Whenever the provisions of any other statute or local ordinance or regulation impose higher standards than are required by these regulations, the provis ions of such statute or local ordinance or regulations shall apply. Chapter 26 | Draft 1.7 | 28 (Ord. No. 2008-19, Art. 9(16.1, 16.2), 12-16-2008; Ord. No. 2010-28, § 5, 10-19-2010) Sec. 26-11. Identify roads in the county County road system. (a)Purpose. (a) Purpose. The purpose of this section is to establish the criteria, method and means of identification of all roads making up and comprising the Oconee County (the "county") "County") road and highway system (the "county "County road system") and to discontinue from the county County road system those streets, roads and highways found by the county County to be useless and unnecessary for the convenience and necessity of the general public. Nothing herein shall be deemed to amend, alter, or revoke, in any regard section 26 -6 of the Oconee County Code of Ordinances (the "Code of Ordinances"), relating to the acceptance of roads into the county County road system, nor any other section of chapter 26 of the Code of Ordinances, except as explicitly addressed herein. (b)Oconee (b) Oconee County road map. The county County department that currently maintains the Geographic Information System (the "GIS") of the county County shall maintain in its office a map of the county County and such other records as may be deemed necessary or convenient showing the location and number of each roadway within the county County which is a part of the county County road system (the "county "County map"). On At the direction of the Oconee County Council, in accordance with policy established by the Oconee Co unty Council and actions of the Oconee County Council, the public works director shall request the county County department that maintains the GIS to make such additions and deletions of road and highway sections upon such county County map, as may be necessary to keep such county County map current as conclusive evidence of the existence of a county County road or highway. The public works director shall review such additions and deletions of road and highway sections, made through the GIS, to such county County map for accuracy and shall inform the county administrator County Administrator that such county County map has been updated appropriately. At such time, the county administrator County Administrator shall inform the county council County Council that such county County map has been updated as directed by county council. County Council. Where practical, written rights-of- way shall be obtained on roads and highways maintained by the county. County. Provided, however, recognizing that many roadways presently a part of the county County road system have been acquired by prescriptive right or use, written easements or deeds of right-of-way shall not be necessary to conclusively establish the existence of a county County road. All newly-constructed county newly constructed County roads, including subdivision roads, shall become a part of the county County road system only in accordance with section 26-6, hereof, and only when granted upon the grant of the required property interest by written instrument, either by deed or by dedication on plats of subdivisions a subdivision plat duly filed in the office of the clerk Register of court which are formally accepted Deeds, and formal acceptance by the administrator of the county, pursuant to policy established by the Oconee County Council. Notwithstanding any other provision of this section, it shall not be necessary to notify the Oconee County Council when merely the name of an existing county County road or highway section, which is currently included in the county County road system, as evidenced by the inclusion of the road or highway section in the county County map, is changed on the county County map in accordance with existing county County policy and procedures, to keep such county County map current. (c)Findings (c) Findings of fact. The Oconee County Council, by this section, declares the following findings of fact: (1)An (1) An attempt has been made and will continue to be made to identify all roadways located in the county County which are useful and necessary for the traveling public and have been designated and treated by the county County as county County roads; and (2)Such (2) Such roadways have been maintained by the county County since at least January 1, 1981, or have been dedicated to and accepted by the county County in accordance with then-current county County policies as county County roads; and (3)There (3) There exist many roadways which were formerly maintained by the county, County, upon which maintenance is no longer required by reason of disuse or which were maintained by the county County under circumstances possibly contrary to the statutory law of this state, none of which have ever been accepted by the Chapter 26 | Draft 1.7 | 29 county County as county County roads or designated as such in accordance with then-current county County policies. (d)Official (d) Official roads; discontinuance of all other roads as Oconee County roads. Based upon the continuing findings of fact of the Oconee County Council set out by subsection (c) hereof, the official road and highway system of Oconee County shall include only the following roads as Oconee County roads: (1)Those (1) Those unpaved roads or highways continuously maintained by county County equipment as duly authorized by the administrator (or his/her a predecessor) of the county County since January 1, 1981, and thereafter, and treated as and called county County roads; and (2)Those (2) Those roadways, streets or highways accepted into the county County road system since January 1, 1981, by reason of and in accordance with the provisions of the Code of Ordinances pertaining to non -subdivision roads, including newly-constructed roads, and subdivision roads; and (3)All (3) All paved or asphalted roads running in and through the county County other than roads and highways of the state and federal highway systems, and roads designated on the county County records as "private roads", upon receipt of evidence satisfactory to the county administrator County Administrator and public works director that such road(s) are, in fact, public roads of the county, County, including, without limitation, through proof of dedication to public use and acceptance by the county, County, or by proof of continuous use and maintenance as public roads by the county County for the period of time as statutorily required by Section 15-67-210, et seq., of the Code of Laws of South Carolina, 1976, or successor legislation, as a mended, to establish adverse possession, or other good and sufficient proof; provided, however, any portion of a paved road which has been barricaded or blocked because of the construction of Lakes Keowee, Hartwell or Jocassee shall not be considered part of the county County road system from the point of the blockade and shall not be maintained by the county. County. Upon the identification of any such "orphaned" sections of roads which were previously county County roads, actions shall be initiated by the county County pursuant to Section 57-9-10, et seq., of the Code of Laws of South Carolina, 1976, as amended, to make such orphaned parts be judicially closed and abandoned and title thereto vested as dedicated by the courts. Notwithstanding any other provision of this section and upon recommendation of the administrator or the Oconee County Council, on a case-by-case, specific basis, and only for good and sufficient cause shown, of record, any other road may be declared by the Oconee County Council to be a part of the county County road system. No other roads are part of the county County road system, nor shall they be part of the county County road system without dedication to public use and acceptance by the county County in strict accord with the Code of Ordinances. Only roads that are part of the county County road system in accordance with this section shall be reflected on the county County map as county County roads. (e)Status (e) Status of abandoned state highways and roads within municipalities. Notwithstanding the provisions of Section 57-5-120 of the Code of Laws of South Carolina, 1976, as amended, any section of the state highway system so abandoned outside the limits of any municipality located in the county County shall not become a part of the county County road system unless specifically accepted by the county County as a county County road or highway and the abandonment of such road or highway by the State of South Carolina shall be prima facie evidence that the same is useless and not necessary or convenient for use by the public of the county. County. By appropriate action, however, the county County may accept and incorporate any such abandoned roadway into its county County road system, at the Oconee County Council's sole discretion, and in accordance with this chapter. In the event a county County municipality's boundaries are expanded, through annexation or other such action, and such expanded boundaries then encompass or include any part of a road that ha s previously been maintained by the county County and incorporated as a county County road into the county County road system, as evidenced by such road's inclusion in the county County map, the municipality whose expanded boundaries then encompass such road portion shall be solely and exclusively responsible for all maintenance, of whatever kind, of such road portion in accordance with Section 5-27-110 et seq., of the Code of Laws of South Carolina, 1976, as amended. Such road portion, only (not the remainder of the road which is not annexed), shall be removed from the county County road system and the county County map, in accordance with the guidelines and procedures set forth in this Chapter 26 | Draft 1.7 | 30 chapter, and such road portion shall henceforth be a road of that munic ipality and shall no longer be a county County road. (Ord. No. 83-7, §§ I—V, 8-16-1983; Ord. No. 2013-08, § 2(Exh. A), 1-21-2014) Sec. 26-12. Acceptance of certain unpaved roads. (a)Rudimentary (a) Rudimentary roads. There is hereby established a class of public roads to be known as "rudimentary roads." (b)Rudimentary (b) Rudimentary road program. There is hereby established a rudimentary road program (the "program") by which the county County may receive and accept a limited number of substandard roads int o the county County public road system for minimal upgrade and minimal maintenance as rudimentary roads. (c)Criteria (c) Criteria for substandard roads to be accepted into the program. In order for a substandard road to be accepted into the program it must meet the following criteria: (1)The (1) The road must serve 11 or more occupied residences. (2)The (2) The road must be unpaved and in a state of severe disrepair, such that it may be impassable by emergency vehicles or otherwise dangerous. (3)The county (3) The County must be deeded a 50-foot right-of-way easement, with language acceptable to the county, County, to carry out all tasks necessary herein for the length of the road to be accepted by the county. County. The road must be centered within the deeded right-of-way. (4)The (4) The road must have a cul-de-sac at its termination point, if any. (5)All (5) All property owners adjacent to, and served by, the road must agree to remove any structures, improvements, debris, etc. that exist within the right-of-way. (6)All (6) All property owners adjacent to, and served by, the road must agree to accept the conditions and results of limited upgrade and maintenance, as well as resulting stormwater runoff. (7)All (7) All property owners adjacent to, and served by, the road must agree that use of the road by the general public will be unrestricted. (8)All (8) All property owners adjacent to, and served by, the road must agree to release, indemnify, and hold the county County harmless from any claims or damages arising, or alleged to have arisen, from or in any way related to the program established hereby. (9)The (9) The road shall be subject to an emergency service access review. (d)Petition (d) Petition for acceptance into the program. (1)The county's (1) The County's roads and bridges department shall establish a petition containing the elements outlined in subsection (c) above, to be completed and submitted by the community requesting acceptance of a substandard road into the program. The petitioning community is solely responsible for all costs associated with compiling a complete petition, including but not limited to costs related to any necessary investigations, surveys, agreements, deeds and/or rights-of-way. (2)The county engineer (2) The County Engineer or designee shall review the petition and provide a "staff report" determining whether the petition is complete. (3)Complete (3) Complete petitions, along with the staff report, shall be submitted to the transportation committee of the county council, County Council, which in turn will provide the staff report to the county council, County Council, making a recommendation as to whether the petition for acceptance into the program should be accepted or not. Included with the recommendation will be any public comments received. The county council County Council shall then, in public meeting, make a determination as to whether the petition for acceptance into the program should be approved by the county County or not. If the county council County Council approves the petition, it shall signify so by resolution. Chapter 26 | Draft 1.7 | 31 (e)Minimal (e) Minimal upgrading and maintenance standards established for rudimentary roads. Once accepted into the program, the subject road will be minimally upgraded and maintained as follo ws: (1)The (1) The road shall be upgraded to a width of 20 feet and be centered in the 50 -foot right-of-way. (2)The (2) The road's center line's centerline's vertical and horizontal alignment shall remain in roughly the same orientation as its pre-existing condition. (3)The (3) The road surface shall be upgraded to a minimum thickness of six-inch six inches of compacted stone. It shall not be paved. (4)The (4) The shoulders of the road shall extend four feet from the road surface. (5)From (5) From the edge of the shoulders there shall exist, or be constructed, 18 -inch deep ditches, with a minimum 2:1 slope. (6)There (6) There shall exist or be constructed tail ditches at frequent intervals (e.g., every 400 feet). (7)Any (7) Any existing drainage pipes shall be extended to accommodate the new road width. (8)If (8) If the road terminates, as opposed to intersects with another public road, a cul -de-sac with an 80-foot diameter shall be constructed. In this case, a deeded right-of-way of 100 feet shall also be required for the subject area. (9)No (9) No maintenance of storm drains, pipes, ditches, culverts, catch basins, etc. will be performed by the county. County. (10)Maintenance (10) Maintenance (limited to blading and stone replacement) shall be on an as needed basis but not to exceed one time per calendar year, barring the need for emergency -related work as determined by the roads and bridges department. (11)Any (11) Any upgrades occurring after the initial minimal upgrades performed by the county County must meet current county County standards for public roads (thus removing the subject road from the rudimentary road class) class), be approved by the county County in writing, and be paid for by the residents. (f)Relation (f) Relation to other ordinances, resolutions or other enactments. (1)As (1) As the provisions of this section create a distinct program by which the county County may receive and accept a limited number of substandard roads into the county County public road system for minimal upgrade and minimal maintenance as rudimentary roads, this section does not operate to repeal or rescind any existing ordinances, resolutions, or other enactments of the county County to the extent there exist any conflicts herewith. Nonetheless, any such conflicts do not operate to preclude the effect of the provisions contained herein. (2)To (2) To the extent any ordinance, resolution, or other enactment of the county County does not conflict with the provisions and intent of this section, such ordinance, resolutio n, or other enactment applies here with equal force. (g)Miscellaneous. (g) Miscellaneous. (1)Rudimentary (1) Rudimentary roads shall not be eligible for improvements as contemplated by section 26 -5. (2)Subdivisions (2) Subdivisions will not be permitted/allowed along rudimentary roads. (3)Additional (3) Additional ingress/egress encroachments along rudimentary roads are prohibited. (4)Rudimentary (4) Rudimentary roads are subject to such other limitations and restrictions as the county administrator, County Administrator, in his or her the County Administrator's sole discretion, shall deem necessary for carrying out the intent of this section while not otherwise impacting the integrity or purposes of the county County public road system. (5)Operation (5) Operation of the program may be significantly limited or completely suspended based on existing budgetary constraints. (Ord. No. 2016-16, §§ 1—7, 6-7-2016) Chapter 26 | Draft 1.7 | 32 Secs. 26-13—26-100. Reserved. ARTICLE II. ROAD NAMING AND ADDRESSING Sec. 26-101. Name. The name of this article shall be the "Oconee County Road Naming and Addressing Ordinance". Ordinance." (Ord. No. 2007-10, § 1, 7-17-2007) Sec. 26-102. Purpose and intent. It is the purpose of this article to enhance efficient emergency response and further the orderly development of the county County by establishing standards for the naming of roads and assigning addresses to structures, and to provide for the creation of office policies and procedures to assist the staff in implementing these standards. (Ord. No. 2007-10, § 2, 7-17-2007) Sec. 26-103. Authority. This article is adopted pursuant to provisions of S.C. Code 1976 Title 23, Chapter 47; and Title 6, Chapter 29. (Ord. No. 2007-10, § 3, 7-17-2007) Sec. 26-104. Jurisdiction. This article shall apply to all areas within the boundaries of the county County that are designated by the State of South Carolina to be the responsibility of the county County in the naming of roads and addressing. (Ord. No. 2007-10, § 4, 7-17-2007) Sec. 26-105. Finding of facts. The county council County Council hereby establishes and adopts the following standards to regulate the assignment of road names and addresses, and to establish penalties such as are necessary to discourage activities that impair effective implementation of this article. (Ord. No. 2007-10, § 6, 7-17-2007) Sec. 26-106. Road naming. (a)The county planning commission (a) The Planning Commission shall approve and authorize road names pursuant to S.C. Code 1976 § 6-29-1200 and § 23-47-60. To this end, the planning commission Planning Commission may establish policies and procedures as necessary to enable staff to carry out this directive in the most efficient and equitable manner possible. (b)All (b) All policies and procedures governing road naming shall be contained in a public document entitled, "Oconee County Road Naming and Addressing Policies", which may be amended by the county planning commission Planning Commission from time to time as necessary. (c)The county planning commission (c) The Planning Commission shall maintain a master list of a road names assigned in the county. County. (d)Appropriate (d) Appropriate fees may be established by resolution of county council County Council from time to time to cover costs related to road naming. (Ord. No. 2007-10, § 6, 7-17-2007) Chapter 26 | Draft 1.7 | 33 Sec. 26-107. Road signage. (a)All (a) All road signage shall meet the standards put forth in the Federal Highway Administration's Manual of on Uniform Traffic Control Devices, and policies outlined in the "Oconee County Road Naming and Addressing Policies." (b)Appropriate (b) Appropriate fees may be established by resolution, ordinance or other official act of county council County Council from time to time to cover costs related to road signage. (c)All (c) All costs associated with the installation of signage in a new subdivision sh all be borne by the developer/owner. (d)All (d) All costs associated with changing signage on an existing road for nonemergency related reasons shall be paid by the party initiating the change. (e)Property (e) Property owners' associations ("POAs") and homeowners' associations ("HOAs") which are properly organized as legal entities and insured to the satisfaction of county council, County Council, and which satisfactorily demonstrate to county council County Council the financial ability to do so, may request the county, County, acting by and through the county council, County Council, to enter into a legally binding agreement with such POA/HOA authorizing the POA/HOA to maintain road signage within its respective community, subject to: agreeing to indemnify the county County and hold the county County harmless as to all harm, damages, or liability which might occur because of the POA/HOA's maintenance of such signage; compliance with subsection 26 -107(a) hereof; complete payment by the POA/HOA of all costs of any type associated with maintaining such signage; and maintenance by the POA/HOA of adequate insurance, naming the county County as an additional insured, to fulfill its obligations hereunder and thereunder. If the POA/HOA meets all conditions of this s ubsection, it may utilize signage of its own design and choosing, consistent with county County roads and bridges department policies as to sign background color, lettering style, and inclusion of road number designation on street name signage, to the satisfaction of county council, County Council, in that respective community. (Ord. No. 2007-10, § 7, 7-17-2007; Ord. No. 2010-17, § 2C, 9-21-2010; Ord. No. 2012-21, § 2, 7-17-2012) Sec. 26-108. Addressing and numbering. (a)A (a) A uniform system of assigning address numbers for properties, principal buildings, and other structures shall be implemented in conformance to S.C. Code 1976 § 23-47-60. (b)All (b) All addresses assigned after the adoption of these standards shall be unique within the jurisdiction of these regulations, and comply with the standards put forth in the "Oconee County's Road Naming and Addressing Policy." (c)Addresses (c) Addresses existing at the time of the adoption of these standards may be changed as necessary to provide for an efficient emergency response, and to accomplish the purpose and intent of state regulations and this article. Any address found to present a potential threat to the health; safety health, safety, and welfare of the public shall be changed as soon as is practicable. (d)Written (d) Written notification of assigned addresses shall be provided to the owner, occupant, or agent of each building in all instances of new or changed addresses. (e)Assigned (e) Assigned addresses shall be displayed in such a manner as to meet all applicable state and local standards. (Ord. No. 2007-10, § 8, 7-17-2007) Sec. 26-109. Appeals. Appeals to from a decision made by the county County addressing staff must shall be submitted in writing to the planning director, Planning Director and must indicate shall state the specific reason for the appeal. The planning director Planning Director shall forward all appeals to the planning commission, who Planning Commission, which shall act on the appeal pursuant to the standards established in S.C . Code 1976, Title 6, Chapter 29. Chapter 26 | Draft 1.7 | 34 (Ord. No. 2007-10, § 9, 7-17-2007) Sec. 26-110. Administration and implementation. The county County addressing office shall assign all addresses issued in the county County pursuant to state regulations and the standards contained in this article. The County addressing office or its authorized designee shall be the sole party authorized to issue addresses within the jurisdiction of this article. Every owner, agent, or other responsible party of each house, building or other addressed structure shall display the correct address in such a manner as is necessary to meet the standards put forth in this article. Specific guidelines related to displaying addresses shall be available from the addressing office. (Ord. No. 2007-10, § 10, 7-17-2007) Sec. 26-111. Enforcement. No building permit, land use permit, or other county-sanctioned County-sanctioned authorization shall be issued for any building, structure, development development, or other usage use until appropriate addresses have been assigned. assigned. When chapter 32 requires addresses for a subdivision, those addresses shall be assigned before final subdivision approval. Final approval of any structure erected, repaired, altered, or modified after the effective date of this article shall be withheld by the building official until such time as the appropriate address has been properly posted. Failure to post and maintain appropriate signage or addressing as required by this art icle shall be considered a violation of these regulations, regulations and may subject the owner, agent or responsible party to all penalties proscribed prescribed herein. (Ord. No. 2007-10, § 11, 7-17-2007) Sec. 26-112. Violations and penalties. (a)Failure (a) Failure to obtain or to post addresses. Failure by an owner, agent, or responsible party to obtain an appropriate E-911 address, or to knowingly place an incorrect address in such a manner other than is provided for by this article, shall constitute a violation of this article. The owner, agent, or responsible party shall be deemed guilty of a misdemeanor and, upon conviction, shall be fined not more than $50.00 dollars or imprisoned for a term not to exceed 30 days. Each day that the said violation continues to exist, exist shall constitute a separate offense. (b)Tampering (b) Tampering with street signs, road signs or posting illegal street. road signs. Removing or defacing a street name sign in any manner, placing a street name sign in any location not approved for such by the county County roads department, or being found in possession of a stolen street sign shall constitute a violation of this article. Any person found in violation shall pay all cost costs associated with the replacement or repair of the signs, and shall be deemed guilty of a misdemeanor and, upon conviction, shall be fined not less than $250.00 dollars per offense or imprisoned for a term not to exceed the authority of the magistrate's courts. (c)Removing (c) Removing or defacing numbers. Any person who unlawfully removes, defaces, marks, changes, destroys or renders an existing posted address number, or road number unreadable in any m anner shall be deemed guilty of a misdemeanor and, upon conviction, shall be fined or imprisoned for a term not to exceed the authority of the magistrate's court. (Ord. No. 2007-10, § 12, 7-17-2007) Chapter 26 | Draft 1.7 | 35 Secs. 26-113—26-150. Reserved. ARTICLE III. A PROGRAM TO DESIGNATE OCONEE COUNTY'S SCENIC HIGHWAYS; ESTABLISHED Sec. 26-151. Oconee County scenic highways. Highways located within Oconee County, South Carolina and found to be of special value to the citizens may be designated as scenic highways pursuant to the rules, regulations, and criteria set forth below. (Ord. No. 2017-22, § 1(Exh. A), 9-19-2017; Ord. No. 2025-06, § 1(Exh. A), 4-1-2025) Sec. 26-152. Definitions. The following words, terms terms, and phrases, when used in this article article, shall have the meanings ascribed to them in this section, except where the context clearly indicates a different meaning: Highway means all those roads, streets and highways within the federal, state or Oconee County highway system. Intrinsic qualities means those significant tangible and intangible resources found within a scenic corridor that are known to be distinct within the region. "Intrinsic qualities" include: (1)Scenic: (1) Scenic: The composition of features that are regionally representative, associative or ins pirational. These features are memorable, distinct, visually impressive, and continuous across the view. (2)Historic: (2) Historic: Landscapes and structures that educate and stir an appreciation for the legacy of Oconee County's past. (3)Cultural: (3) Cultural: Activities or objects that represent unique and distinctive expressions of community life, customs or traditional ways and identify a place, region or culture. (4)Recreational: (4) Recreational: Passive and active leisure activities directly dependent on the scenic qualities of the area and usually associated with outdoor recreation as we seek to refresh and renew our spirits. (5)Natural: (5) Natural: Relatively undisturbed and visually pleasing natural areas and/or ecologically sensitive landscapes representing natural occurrences including landforms, water, vegetation and wildlife characteristics. (6)Archaeological: (6) Archaeological: Sites, artifacts or structures recognized by the scientific or academic communities as being representative of past human life and activities. Scenic highway means a highway or segment of a highway receiving a designation as such pursuant to the provisions contained in this article and based on it deserving such recognition due to scenic vistas, cultural or historical significance, or other criteria specified by county council. County Council. All scenic highways shall be divided into two route categories: (1)Highways (1) Highways with limited development visible from the highway, yet still retaining special characteristics worthy of preservation, shall be designated a category I scenic highway. (2)Highways (2) Highways with little or no development visible from the highway lying outside primary growth areas, shall be designated a category II scenic highway. (Ord. No. 2017-22, § 1(Exh. A), 9-19-2017; Ord. No. 2025-06, § 1(Exh. A), 4-1-2025) Sec. 26-153. Designation process. (a)Applications (a) Applications shall be submitted in writing to the planning department by a sponsoring organization (see section 25-154(B)), 26-154(b)), or by a property owner or group of property owners whose property is contiguous to the proposed scenic highway. Applications shall contain the contact information of the person designated by the submitting group as the primary contact for purposes of the designation process and subsequent regulatory and related activities if the proposed highway receives the scenic designation. Chapter 26 | Draft 1.7 | 36 (b)All (b) All persons or entities owning property that is contiguous to the right -of-way of the proposed scenic highway must sign the application for designation as a scenic highway. (c)Upon (c) Upon receipt of an application for the designation of a highway as a scenic highway, the planning director, Planning Director or their designee, designee shall forward the application to the staff liaison for the planning commission, Planning Commission, who shall then place review of the application on the next appropriate planning commission Planning Commission agenda for consideration. Notice of the date, time, and nature of the planning commission's Planning Commission's meeting to consider the application for designation as a scenic highway shall be published in a newspaper of general circulation in the county County at least 15 days prior to the meeting. Additionally, signs measuring at least nine square feet and noting that feet, providing notice of consideration of an application for designation of to designate the subject highway as a scenic highway, and containing contact information for the planning commission's Planning Commission's staff liaison, shall be posted at the beginning and end of the proposed scenic highway and at increments of no less than one mile along the length of the proposed scenic highway. These signs shall remain in place until county council County Council takes final action on the application, as provided for herein. (d)The planning commission (d) The Planning Commission shall review applications for compliance with the criteria for designating a scenic highway established in this article (see section 26-156, appendix B). Upon completion of the review, the planning commission Planning Commission shall by vote determine a recommendation regarding the designation of the subject highway. The planning commission's Planning Commission's recommendation shall be forwarded to county council. County Council. In the event county council County Council determines the proposed highway merits designation as a scenic highway, it shall so indicate its decision by ordinance. Prior to enactment of such ordinance, county council County Council shall hold a public hearing on the question of the proposed scenic highway designation. Notice of the public hearing shall be published in a newspaper of general circulation in the county County at least 15 days prior to the subject meeting, and written notice containing all pertinent information related to the public hearing shall be sent by first class first-class mail to the owner of each parcel that is contiguous to the proposed scenic highway at least 15 days prior to the h earing. For the purposes of this section, the name and address of the owner of the parcel shall be as listed on the tax records maintained by the county County tax assessor. (e)Any (e) Any highway proposed for designation as a scenic highway that is reject ed for designation by county council, County Council may not be proposed again for a period of one year from the date of publication of the decision. (Ord. No. 2017-22, § 1(Exh. A), 9-19-2017; Ord. No. 2019-10, § 1(Exh. A), 3-5-2019; Ord. No. 2025-06, § 1(Exh. A), 4-1-2025) Sec. 26-154. Regulations. (a)It (a) It shall be unlawful for any person other than the owner, owner's agent, or other individual with the full knowledge and consent of the owner of a property situated along the right -of-way of a designated and properly identified scenic highway to dig, pull up, gather, remove, cut, maim, break, or injure in any way a public or private property, to include any injury done by fires intentionally set, and to include any injury done to any wild, cultivated, or ornamental plants, shrubs, and trees. These provisions s hall not apply where the acts hereby prohibited are done by or under the instructions of county County or state authorities lawfully in charge of such public roads, highways or lands, or by a utility in the lawful pursuit of installation or maintenance of their its facilities. Violation of this provision of this article shall be punishable by a fine not to exceed $500.00. (b)The (b) The sponsoring organization or property owner(s) submitting an application to the county County for designation of a highway as a scenic highway shall be responsible for the removal of trash along the portion of the highway so designated as a scenic highway no fewer than three times each year. Permits and/or required notifications related to any and all activities inside a right-of-way shall be the responsibility of the sponsoring organization or property owner(s). Any individual taking part in trash removal duties, or any other activities related Chapter 26 | Draft 1.7 | 37 to the standards of this article, shall comply with any and all standards and practi ces utilized by the entity responsible for maintenance of the highway. (c)A (c) A member of the county County staff shall be designated by the county administrator County Administrator to review the status of all county County designated scenic highways every two years, or more frequently if deemed necessary by the county administrator County Administrator or the designated staff member. In the event it is determined that a route fails to meet the criteria established in this article, a report shall be made to the planning commission, Planning Commission, which shall notify the sponsoring organization or property owner(s) of the nature of the failure(s) and provide a 45-day period for corrective action. The planning commission Planning Commission shall thereafter recommend a course of action to county council County Council if necessary. Such recommendations may include, but are not limited to, reclassification to a lower category and/or redesignation. (d)Regulations (d) Regulations contained in this section shall apply equally to both category I and category II scenic highways; however, category II scenic highways shall receive preference in the pursuit of funding to be utilized in maintaining and enhancing the intrinsic values leading to their designation. (e)A (e) A determination of this issue must be made within six months of the county County receiving an application. (Ord. No. 2017-22, § 1(Exh. A), 9-19-2017; Ord. No. 2025-06, § 1(Exh. A), 4-1-2025) Sec. 26-155. Appendix A. A scenic highway corridor management plan shall include the following components: (1)A (1) A detailed description of the section of the highway to be designated, including two or more of the intrinsic qualities as defined in this article; a specification as to how the highway in questio n fits the criteria; an identification of any problem areas that may impact the scenic highway designation. (2)A (2) A marked map clearly indicating the section of the highway the applicant is proposing for designation. (3)Photographs (3) Photographs or videos of areas which the applicant considers to be of intrinsic value or significance. (4)Letters (4) Letters of support from citizens, businesses, civic groups, and other organizations. (5)A (5) A maintenance plan outlining proposed litter collection activities. (6)Any (6) Any additional proposed actions intended to enhance and maintain the highway if designated a scenic highway. (Ord. No. 2017-22, § 1(Exh. A), 9-19-2017; Ord. No. 2025-06, § 1(Exh. A), 4-1-2025) Sec. 26-156. Appendix B. Criteria for designating a highway as a scenic highway. (a)The planning commission (a) The Planning Commission shall consider the following in determining whether a highway should be designated as a scenic highway. (1)Intrinsic (1) Intrinsic qualities (as defined by this article). (2)Additional (2) Additional amenities and support (such as but not limited to): a.Hospitality a. Hospitality features. b.Length b. Length of route. c.General c. General support for proposed route. d.Financial d. Financial commitment. e.Role e. Role in regional/statewide strategy. Chapter 26 | Draft 1.7 | 38 f.Protective f. Protective easements, zoning overlays, or other land use restrictions. (3)Features (3) Features negatively impacting the scenic qualities of the highway, (such as but not limited to): a.Junkyards/litter. a. Junkyards/litter. b.Dilapidated/unattractive b. Dilapidated/unattractive structures. c.Excessive c. Excessive advertising. d.Heavy d. Heavy traffic uses. e.Mining/lumbering e. Mining/lumbering scars. f.Heavy f. Heavy industry. g.Parallel g. Parallel and visible utilities along highway. h.Landfills/other h. Landfills/other pollutants visible from route. (4)Feasibility (4) Feasibility of maintenance plan and responsibilities. (Ord. No. 2017-22, § 2(Exh. A), 9-19-2017; Ord. No. 2025-06, § 1(Exh. A), 4-1-2025) Chapter 32 | Draft 4.4 | 1 Chapter 32 Unified Performance Standards Word track changes 4.4 | October 2, 2026 Oconee County South Carolina Comparison with adopted Chapter 32, Supplement No. 55, within the approved amendment scope. Deletions appear in red strikethrough; insertions appear in blue; retained text is black. Revisions show whole words. Article VII remains unchanged. Other excluded articles are not reproduced. ARTICLE V. GROUP RESIDENTIAL DEVELOPMENTS Sec. 32-171. Authority of article provisions. The regulations of this article are enacted pursuant to S.C. Code 1976, § 6 -29-310, et seq. (Ord. No. 2022-09, § 1(Exh. A), 4-19-2022) Sec. 32-172. Purpose of article. The regulations of this article are intended to lessen the adverse impact of large -scale group residential development on neighboring residential areas and to ensure the health, safety and general welfare of residents and citizens of the county. (Ord. No. 2022-09, § 1(Exh. A), 4-19-2022) Sec. 32-173. Definitions. The following words, terms and phrases, when used in this article, shall have the meanings ascribed to them in this section, except where the context clearly indicates a different meaning: Board means the board of zoning appeals (BZA), as defined in section 32 -5. Exempted residential facility means recreational summer camps, day facilities, and religious retreat facilities, any of which do not provide for long-term stays of 30 days or more. Hospitals and nursing homes are exempted from the requirements of this article. Group residential facility means a public, private, or not -for-profit facility, which (i) provides a community living environment for individuals, whether or not disabled under applicable law, requiring custodial care, medical or therapeutic treatment, or specialized social services and (ii) facility that houses ten or more persons not related by blood, marriage, or adoption in a residential or dormitory environment for a period of 30 days or more per year. Residential treatment centers (RTCs) are included in this definition. Proposed group residential facilities must show compliance with all applicable requirements year and that is one of the State of South Carolina. following: (1) A community living facility for persons requiring custodial care, medical or therapeutic treatment, or specialized social services, including a residential treatment center; (2) A fraternity house or sorority house providing communal residential accommodations for members or affiliates of a recognized fraternity or sorority. A facility shall comply with all state requirements applicable to that facility. (Ord. No. 2022-09, § 1(Exh. A), 4-19-2022) Sec. 32-174. Group residential facilities permitted by special exception. Persons desiring to build or expand a group residential facility as defined by this article shall make an application through the planning director, director or designee, designee to the board providing information required by this article. Development or expansion of a group residential facility may commence only with the approval of the board as a special exception after a public hearing in accordance with section 32 -5. Chapter 32 | Draft 4.4 | 2 (Ord. No. 2022-09, § 1(Exh. A), 4-19-2022) Sec. 32-175. Review of application by planning director, director or designee. All applications for development or expansion of residential group facilities must be submitted to the county planning director, director or designee for review. Applications must be complete and shall include all of the materials and information required by this article (application requirements and sketch plan and preliminary development plans) and must meet all applicable requirements and/or conditions in this article before an application will be processed. Incomplete applications will be returned to the applicant. The planning director, director or designee shall refer completed applications to the board for final review and approval as a special exception. The planning director, director or designee shall act upon applications within 30 days of receipt, returning them for cause, or forwarding them to the board for further action. (Ord. No. 2022-09, § 1(Exh. A), 4-19-2022) Sec. 32-176. Public hearing and approval by the board. The board shall conduct a public hearing and shall review applications for compliance with the provisions of this article, in particular with section 32-180, board criteria for granting a special exception and general criteria for special exceptions in article I of this chapter. Development or expansion may proceed only as approved by the board. Any changes in development or expansion plans as approved by the board shall require a new application. (Ord. No. 2022-09, § 1(Exh. A), 4-19-2022) Sec. 32-177. Appeals. Whenever there is an alleged error by the planning director, director or designee in an order, requirement, decision, or determination, an applicant may request a hearing before the board in accordance with the provisions of section 32-5. Appeals of the decisions of the board may be made to the county circuit court in accordance with the provisions of section 32-5. Appeal hearings shall be advertised and reasonable fees may be charged in accordance with article I of this chapter. Appeals of the decisions of county council may be made to the county circuit court in accordance with the South Carolina Code of Laws. (Ord. No. 2022-09, § 1(Exh. A), 4-19-2022) Sec. 32-178. Application requirements. Applications for development or expansion of group reside ntial facilities must include the following: (1) A complete description of the name and purpose of the proposed facility; (2) A complete list of the names, addresses, and phone numbers of board members, owners and investors, as applicable; (3) A copy of a license any state license, or application for a license to state license, required by law for operation of the state department of social services to operate a proposed group residential facility; (4) State tax identification number or tax exemption certification; and (5) Two copies of a preliminary development plans and a sketch plan displaying the physical and relative layout of the facility as outlined by section 32-179. (Ord. No. 2022-09, § 1(Exh. A), 4-19-2022) Sec. 32-179. Sketch plan and preliminary development plans. A sketch and development plan will be required for all proposed group residential developments. The sketch plan shall be drawn at an approximate scale of not less than a scale of 200 feet to one inch and shall include a vicinity map showing the relationship of the proposed development to the surrounding areas. The planning director, director or designee may waive some of the following sketch plan elements on applications for minor Chapter 32 | Draft 4.4 | 3 modifications and additions to existing facilities; otherwise, all sketch plan submittals shall include the following in sketch and narrative form: (1) An accounting of total acreage in the tract and any proposed subdivision of parcels; (2) Arrangement, shape, dimensions, and area of proposed development; (3) Location of existing property lines, easements, road rights-of-way, buildings, or other public ways adjoining the tract to be developed; (4) Alignment, right-of-way width, and clarification of proposed roads; (5) Topography by contour at intervals of not more than ten feet (as from USGS quad sheets); (6) Map scale, north arrow, and date; (7) Name/address/telephone number of legal owner or agent and the professional (surveyor or engineer) who will undertake detailed layout and improvements design; (8) Location of watercourses and land subject to flooding based on a 100 -year frequency flood; (9) The existing and proposed uses of land throughout the development; (10) Proposed method of water supply and wastewater treatment and other utility services; (11) The proposed name of the development; (12) The owner/developer shall submit a sketch plan of this entire tract even though the subdivider's present plans call for the actual development of only a part of the property. (Ord. No. 2022-09, § 1(Exh. A), 4-19-2022) Sec. 32-180. Board criteria for granting a special exception. The board criteria for granting a special exception shall be as follows: (1) Traffic flow from the facility shall not present a danger to local residents, motorists and pedestrians. (2) Noise, lighting, and activities carried out on the premises of the facility shall not present a nuisance to local residents. (3) The residents of the facility shall not present any potential danger to local residents. (4) The residents of the facility shall reside in a safe and healthy environment. (5) The proposed development is in compliance with the other provisions of this chapter. (Ord. No. 2022-09, § 1(Exh. A), 4-19-2022) Sec. 32-181. Reasonable accommodation requests. Oconee County Council is authorized to grant reasonable accommodations under the Federal Fair Housing Act, the Americans with Disabilities Act of 1990, the Rehabilitation Act of 1973, and the South Carolina Fair Housing Law, as amended, under the circumstances set forth in this section. Any person who requires a reasonable accommodation, because of a disability, in the application of a land use or zoning law, rule, policy, or practice that may be acting as a barrier to equal opportunity to housing opportunities, or any person or persons acting on behalf of or for the benefit of such a person, may request such accommodation. An application for a reasonable accommodation, which shall be in writing on a form prescribed by the county and available from the county planning department, shall be filed with the county administrator and the county planning director. At a minimum, the application shall contain: (1) The applicant's contact information (name, mailing address, telephone number, fax number, and email address); Chapter 32 | Draft 4.4 | 4 (2) The contact information for the owner(s) of the property (if different from the applicant); (3) The address of the property at which the reasonable accommodation is requested; (4) A full description of the reasonable accommodation requested; (5) A detailed statement explaining how and why the request meets the standards for a reasonable accommodation as set forth in this section; (6) The notarized signature of the applicant and property owner(s) (if different from the applicant); and (7) The information required under sections 32-178 and 32-179 of this article, provided the requirement of submitting such information is not the subject of the reasonable accommodation request. No filing fee shall be required for the application. County council shall consider the proposed reasonable accommodation and shall decide the request upon a majority vote of the members present. County council shall grant a reasonable accommodation in relation to any provision of this article and related law, if county council finds that the applicant has demonstrated, by the greater weight of the evidence, that the proposed reasonable accommodation is both reasonable and necessary, in accordance with applicable law and the following: (1) "Reasonable": an accommodation will be determined to be reasonable if it would not undermine the legitimate purposes and effects of existing land use or zoning regulations, and if it will not impose significant financial and administrative burdens upon the county and/or constitute a substantial or fundamental alteration o f the county's zoning or land use ordinance provisions; and (2) "Necessary": an accommodation will be determined to be necessary if it would provide direct or meaningful amelioration of the effects of the particular disability or handicap and would afford disabled or handicapped persons equal opportunity to enjoy and use a dwelling, including public and common spaces, in the county. After county council has approved a reasonable accommodation request, the applicant shall follow all applicable land use ordinances, procedures, and regulations for the approval of any permits, certificates, or other approvals required in order to proceed with development or use of the property. All orders, decisions, determinations, and interpretations made by administrative officers under those procedures shall be consistent with the reasonable accommodations granted by county council. (Ord. No. 2022-09, § 1(Exh. A), 4-19-2022) Sec. 32-182. Building permits and certificate of occupancy. Building permits and certificate of occupancy shall not be issued until or unless authorized by the planning director, director or designee and the proposed development is in compliance with the requirements of this article and the standard building codes as adopted by the county. (Ord. No. 2022-09, § 1(Exh. A), 4-19-2022) Secs. 32-183—32-210. Reserved. ARTICLE VI. LAND DEVELOPMENT AND SUBDIVISION REGULATIONS Sec. 32-211. General provisions. (a) Short title. This article shall be known and cited as the "Oconee County Land Development and Subdivision Regulations Ordinance." (b) Authority. These land development and subdivision regulations are adopted under authority granted by S.C. Code 1976, tit. VI, ch. 29, § 6-29-1120 et seq. Chapter 32 | Draft 4.4 | 5 (c) Jurisdiction. These regulations shall apply to the development and subdivision of land within the unincorporated areas of the county as now or hereafter established and any incorporated municipality which contracts with the county for these regulations to be administered within such municipality. Regulations cont ained within this article that apply to the construction and maintenance of roads shall apply to all roads and drainage structures, whether public or private, constructed within any unincorporated area of the county and municipalities contracted with the county for administration of these regulations. Regulations contained within this article that apply to the construction and maintenance of roads, appurtenances or drainage structures shall apply to all public and private roads, drives and driveways in the unincorporated areas of the county; also included shall be all municipalities contracted with the county to administer these regulations. These regulations shall not apply to those roads completed, under construction, or approved (accepted) by the county p rior to adoption of this article by county council. In the event that a regulation in this article conflicts with any other county regulation, the more stringent standard shall apply. (c) Jurisdiction. These regulations shall apply to development and subd ivision of land within the unincorporated areas of the county and any municipality that contracts with the county for their administration. Private drives, private roads, and private roadway easements serving development subject to this article are governe d by this article. County roads and roads proposed for county acceptance are governed by chapter 26 as provided therein. Approval under this article does not constitute acceptance of a road or dedication into the county road system. In the event of a conflict between applicable county regulations, the more restrictive standard applies, subject to state law. (d) Purpose. The purpose of this article is to protect and promote the public health, safety and general welfare of the citizens of the county, South Carolina, providing for the harmonious, progressive, and orderly development of land. These regulations are established for the following specific purposes, among others, as provided for in the South Carolina Local Government Comprehensive Planning Enabling Act of 1994 (S.C. Code 1976, § 6-29-1120, et seq.): (1) To encourage the development of an economically sound and stable county; (2) To assure the timely provision of required streets, utilities, and other facilities and services to new land developments; (3) To assure the adequate provision of safe and convenient traffic access and circulation, both vehicular and pedestrian, in and through new land developments; (4) To assure the provision of needed public open spaces and building sites in new land develop ments through the dedication or reservation of land for recreational, educational, transportation, and other public purposes; and (5) To assure, in general, the wise and timely development of new areas, and redevelopment of previously developed areas in harmony with the county's comprehensive plan. (Ord. No. 2008-20, Art. 1(1.1—1.4), 12-16-2008) Sec. 32-212. Definitions. When used in this article, the following words and terms shall have the meaning indicated. Words and terms not herein defined shall have their customary dictionary definitions. The term "shall" is mandatory. When not inconsistent with the content, words used in the singular number include the plural and those used in the plural number include the singular. Affordable housing means a housing unit for which the total annual cost of a sale (including mortgage, amortization, taxes, insurance, and condominium and association fees) constitutes no more than 28 percent of the annual household income for a household earning no more than 80 perce nt of the area's median income, by household size, as reported by U.S. Housing and Urban Development (HUD); or for a rental housing unit, the total annual cost for rent and utilities can constitute no more than 30 percent of the annual household income for a household earning no more than 80 percent of the area median income, by household size, as reported by HUD. Chapter 32 | Draft 4.4 | 6 Apartment complex means a building or portion thereof, other than a hotel, divided into more than two dwelling units which are arranged in such a manner as to be used for lodging by separate households. Applicant means the developer or agent of the developer who applies for a subdivision review and is designated as the primary contact for said subdivision. Applicant means the owner or an authorized agent who applies for review under this article. The application shall identify the owner and include written authorization for an agent to act on the owner’s behalf. Average daily traffic means the number of trips made by vehicles that will be utilizing a road, intersection or other reference point in a 24-hour period. Block means a parcel of land entirely surrounded by roads or highways, railroad rights -of-way, waterway, or combination thereof. Building footprint means the area included within surrounding exterior walls, or exterior walls and fire walls, exclusive of courts. Building footprint means the horizontal area occupied by a building, measured to the exterior face of its exterior walls at grade, together with any portion of an upper floor that e xtends beyond the exterior walls below. Open courts, uncovered patios, uncovered decks, steps, and similar uncovered features shall not be included in the building footprint. Exclusion from the building footprint does not exempt any structure or projection from applicable building setback requirements. Building line (also referred to as "building setback line") means a line beyond which no part of the structure of any building shall project, unless specifically permitted in this Code of Ordinances, with the exception of subsurface projection of footings, measured perpendicular to the property line. This includes, but is not limited to, the building, eaves, porches, decks, chimneys, bay windows, and fire escapes. Building permit means a document or certificate issued by the county authorizing construction, enlargement, alteration, moving of, or demolition of a building or structure, or the placement of a mobile home (manufactured housing). manufactured home. Caliper means the diameter of a nursery tree trunk measured six inches above ground for the installation-size requirements of this article. Cleared or grubbed areas means the area within the road right-of-way that is cleared of vegetation. Comprehensive plan means any legally adopted part or element of the Comprehensive Plan of Oconee County, South Carolina. This plan may include, but is not limited to, the community facilities, population, economic development, land use, natural resources, and housing elements. Condominium complex means a building or group of buildings containing dwelling units which are individually owned. The structure, common areas, and other facilities are owned by the developer and/or the owners of the individual units on a proportional or individual basis. Crosswalk means an area with a width of ten or more feet dedicated for public use, and intended for pedestrian access to adjacent land area. Contiguous parcels under common ownership means two (2) or more parcels tha t share a common boundary or are otherwise contiguous and are owned, in whole or in part, by: (1) the same person or persons; (2) the same legal entity, including a corporation, limited liability company, partnership, trust, estate, or other legally recogn ized entity; or (3) different legal entities having substantially identical ownership, as evidenced by public records or documentation submitted as part of a subdivision application. For purposes of this chapter, contiguous parcels under common ownership shall be considered collectively only where expressly provided herein. County Engineer or designee means the County official responsible for engineering review or a designee authorized to perform the particular technical review. This term is distinct from p roject engineer. Chapter 32 | Draft 4.4 | 7 County road specifications means the county-adopted, titled and dated technical specifications applicable to materials, installation, compaction, testing, and workmanship, including express county modifications to any external standard. Crosswalk means a designated pedestrian crossing across a roadway with a minimum width of six feet. Cul-de-sac means a local road (minor) with one end open to traffic and the other end terminated with a planned vehicular turnaround. DBH means tree trunk diameter measured at breast height, four and one-half feet above ground. Density means the number of dwelling units or lots per acre of land developed or used for residential purposes. (1) Low density: Two or less dwelling units per acre. (2) Medium density: From 2.1 to 6.0 dwelling units per acre. (3) High density: Over six dwelling units per acre. Developer means an individual, partnership the person or corporation (or agent therefore) that undertakes entity undertaking land development or a subdivision, whether or not the activities covered by these regulations. developer owns the land. Development means any manmade change to improved or unimproved real estate including, but not limited to: new homes, building structures, dredging, filling, grading, paving, o r excavation operations. Development means a manmade change to improved or unimproved real estate, including construction, clearing, filling, grading, paving, or excavation. A review requirement applies when the activity meets the particular land - development or subdivision trigger stated in this article. DHEC Dwelling means the South Carolina Department a building or portion of Health and Environmental Control. a building designed or used for residential occupancy containing one or more dwelling units. Dwelling (1) Single-family dwelling means a building or portion of detached dwelling containing one dwelling unit on a building arranged and/or designed to provide living quarters for one or more families where each dwelling is provided with separate kitchen and bathroom facilities. single lot. (1) Single-family dwelling (2) Duplex means a detached building containing two dwelling designed units arranged, designed, or used for or occupied exclusively by one family on a single lot. independent residential occupancy. (2) Duplex (3) Group dwelling means a building arranged two or designed to be occupied by two families living independently of more principal residential structures on one lot, parcel, or tract, each other on a single lot. containing one or more dwelling units. (3) Group dwelling means a group of two or more principal structures built on a single lot, parcel or tract of land and designed for occupancy by separate families. (4) Multiple-family dwelling means a building or series of buildings on the same parent parcel containing three or more dwelling units arranged, designed, or used for independent residential occupancy, including a partment buildings or apartment complexes. Townhouse units and student housing, as separately defined in this chapter, are not classified as multiple-family dwellings solely by physical form. (4) Multiple-family dwelling means a building or series of buildings on the same parent parcel used or designed as a dwelling place for three or more families living independently of each other, with the number of families in residence not exceeding the number of dwelling units provided. Dwelling unit means one or more rooms arranged, designed, or used as a single independent housekeeping unit for one household, with permanent provisions for living, sleeping, cooking, and sanitation. The presence of an additional kitchen, kitchenette, bathroom, or similar facility within a single-family dwelling does not, by itself, establish an additional dwelling unit unless the space is arranged, designed, or used for independent residential occupancy. Chapter 32 | Draft 4.4 | 8 Dwelling unit means one or more rooms connected together and constituting a separa te, independent housekeeping establishment, with provisions for cooking, eating and sleeping, and physically set apart from any other rooms or dwelling units in the same structure. Easement means a grant of one or more specific property rights by the prop erty owner permitting a specific use or uses to the public, a corporation, or another person or entity. Easement, private roadway means an easement that grants access for all utility and roadway construction and maintenance. Easement, private roadway means a recorded property interest granting specified persons and their successors the rights necessary for private vehicular access and for installation, inspection, repair, replacement, drainage, and maintenance of the roadway and utilities. The easement instrument shall identify beneficiaries and maintenance obligations and shall not convey county ownership or maintenance responsibility. Exempt subdivision means a division qualifying for one of the informational exceptions stated within the definition of subdivision in this section. Flag lot means a lot shaped like a flag on a pole. The "flag" shaped area is situated behind another lot and is the portion of a flag lot where structures may be located. The "pole" shaped area is the portion of the lot by which vehicular access to the flag area from its adjoining road is located. (See chapter 38 for specific provisions addressing flag lots.) Flood means a temporary overflowing of water onto land that is usually devoid of surface water. Floodplain means land areas adjoining a river, stream or watercourse which are subject to a one percent or greater chance of flooding in any given year. These areas are specifically established by the Federal Emergency Management Agency, according to the Flood Insurance Study for the county. Full pond level means full pond level is 660 feet above mean sea level on Lake Hartwell, 800 feet above mean sea level on Lake Keowee, and 1,110 feet above mean sea level on Lake Jocassee. Half road means a road located so that a cross means section of its width lies on mo re than one parcel. Lake means a considerable inland body of standing water. Land development means the changing of land characteristics through construction, redevelopment, construction, subdivision into parcels, a subdivision, condominium complexes, complex, apartment complexes, complex, commercial parks, park, shopping centers, center, industrial parks, mobile home parks, and park, manufactured- home park, or similar developments project for sale, lease, sale or any combination of owner and rental characteristics. lease. A townhouse, condominium, or apartment project is subject to the applicable land - development review whether units are rented or separately owned. Lot means a single parcel or tract of contiguous land intended as a unit for transfer of ownership, or for building development, or both. Landscape area means a portion of a site containing vegetation to remain after construction, including natural areas, buffers, lawns, and plantings. Large-maturing tree, large-maturing shade tree, understory tree, and screening shall have the meanings stated in section 38-12.2 when used in the landscaping, screening, and buffer provisions of this article. Lot means a parcel or tract of land existing, created, or proposed as a separate unit of land, including a remainder parcel. (1) Corner lot means a lot with frontage on at least two intersecting roads located at the point of intersection. (2) Lot depth means the mean horizontal distance between the front and rear lot line s. (3) Double frontage lot means a parcel having frontage on two or more roads which is not located at any intersection of such roads. Chapter 32 | Draft 4.4 | 9 (4) Lot width, unless indicated otherwise by context, means the straight -line distance between the points where the front building line intersects the two side lot lines. Minor subdivision means a minor subdivision is any subdivision of a parcel that is reviewed by the county that: Manufactured home (also referred to as a mobile home or manufactured housing unit) means a de tached, single- family dwelling designed for long-term occupancy, designed to be transported on its own axle and wheels, arriving at the site in sections or as a complete dwelling unit, usually including major appliances, and ready for occupancy. Removal of the wheels or placement on a permanent foundation does not change the manufactured home classification. A travel trailer is not a manufactured home. (1) Results in a total of no more than ten lots; and Manufactured-home park means a land development on commonly owned or operated land containing multiple sites for manufactured homes offered for occupancy without division of the sites into separately owned subdivision lots. Subdivision of separately owned lots is classified under the subdivision definitions of this article. (2) May or may not involve the construction of a private drive, private road, or public road. Multi-family housing means multiple-family dwelling as defined in this section. Mobile home (manufactured housing unit) means a detached, single -family dwelling designed for long-term occupancy, designed to be transported on its own axle and wheels, arriving at the site in sections or a complete dwelling unit, usually including major appliances and furniture, and ready for occupancy. Removal of wh eels and placement of a foundation does not change the mobile home classification. A travel trailer is not a mobile home. Multi-family housing means a building or buildings designed to be occupied by two or more households living independently of each other, with the number of households in residence not exceeding the number of dwelling units provided. Natural vegetative buffer means plants, trees, and vegetation that normally survive in the county without the need of fertilizers, herbicides, or pesticides. Oconee County road means any paved road, gravel road, dirt road or bridge that is owned and/or regularly maintained by the county and considered part of the county road system. Oconee County road means a road in the Oconee County road system under sect ion 26-6 or a legacy County road whose status is established under section 26-11 or other applicable law. The separate rudimentary-road program is governed by section 26-12. Approval of a plan or plat alone does not establish County -road status. Parent parcel means, for purposes of section 32-213(h), all contiguous parcels under common ownership as they existed immediately prior to approval of the original minor subdivision. Open space site means a tract of land provided in residential subdivisions to meet the local recreational needs and desires of residents. Such tracts may include play areas, parks, natural woods, open fields and meadows and areas of scenic beauty. Owner's engineer Owner means an engineer registered and in good standing with the South Carolina Board of Registration for Professional Engineers and Land Surveyors who person or entity holding title to the property that is the agent subject of an application. An applicant or developer is not necessarily the owner of the land proposed to be subdivided, or which is in the process of being subdivided. owner. Owner's land surveyor means a land surveyor registered and in good standing with the South Carolina Board of Registration for Professional Engineers and Land Surveyors who is the agent of the o wner of the land proposed to be subdivided, or which is in the process of being subdivided. Parking, off-street means parking spaces and associated maneuvering areas located outside a public road right -of- way and provided for vehicles associated with a use or development. Such spaces shall have lawful vehicular access and shall be arranged so that maneuvering incidental to parking does not occur on a public road. Chapter 32 | Draft 4.4 | 10 Parking, off-street means an area adequate for parking an automobile with room for safely opening doors on both sides, together with properly related access to a public road arranged so that no maneuvering incidental to parking shall occur on any road. Perennial stream means any creek, river, or other watercourse that has flowing water year -round. Person means any individual, corporation, company, partnership, organization, utility and/or municipality. Planning commission means the county planning commission and planning staff specifically authorized to carry out certain functions on its behalf. Oconee County Planning Commission. Plat means a map or drawing which is an accurate graphical representation of a subdivider's plan for a subdivision. Plat means a survey drawing for land division. A sketch plan depicts the concept; a preliminary plan depicts the proposed development and construction; a final plat is the recordable survey instrument depicting the approved lots and interests. An as-built plan is a separate engineering record of completed improvements. (1) Sketch plan means a simple sketch of a proposed subdivision layout showing roads and other principal features. The sketch plan is preparatory to the preliminary and final plats and may enable the s ubdivider to save time and expense in reaching general agreement as to the form of the plat and the objectives of these regulations. (2) Preliminary plan (plat) means a drawing which shows the proposed layout of a subdivision in sufficient detail to indicate its working ability in all aspects. (3) Final plat (plan) means a drawing which shows the 'as built' layout of all road construction, public utilities, public facilities, and lots to be sold. (3) Final plat means the recordable survey instrument depicting the approved lots and interests. An as-built plan is a separate engineering record of completed road construction, utilities, and other improvements. Potable water means water used or treated by a water company or utility to be sold for human consumpti on. Private driveway means a driveway that provides vehicular access and road frontage to not more than three single - family residences. Private drive means a privately maintained access within a private roadway easement serving four through ten lots, dwelling units, or other units of development, counted in accordance with section 32 -228. Private drive driveway means a privately owned and maintained right-of-way or an easement that specifically grants the right for utilities and all road work, that provides private vehicular access and road frontage to not less than four and not serving no more than ten single-family residential lots. three lots, dwelling units, or other units of development, counted in accordance with section 32-228. Private road means a privately-owned and privately maintained right-of-way that contains roadway within a private roadway constructed easement serving 11 or more lots, dwelling units, or other units of development, counted in accordance with these regulations and provides vehicular access and road frontage to more than ten single-family residential lots. section 32-228. Public road means roads, avenues, boulevards, highways, freeways, lanes, courts, thoroughfares, collectors, minor roads, cul-de-sacs and other ways including the entire right-of-way considered public and both dedicated to and accepted by the United States, the State of South Carolina, or the county. Private-road maintenance instrument means a recorded covenant, easement, or agreement binding the owners and successors served by a private road and identifying the party responsible for its inspection, repair, replacement, drainage, signs, sidewalks, and related costs. Project engineer means a professional engineer licensed in South Carolina and retained by the owner, developer, or applicant to prepare, supervise, or certify engineering design or construction required under this chapter. Project land surveyor means a land surveyor licensed in South Carolina and retained by the owner, developer, or applicant to prepare or certify surveys, plats, or other surveying work required under this chapter. Chapter 32 | Draft 4.4 | 11 Public road means a road, including its public right-of-way, established for public use and accepted by the United States, the State of South Carolina, a municipality, or the County under applicable law. County-road design and eligibility for acceptance are governed by chapter 26. (1) Arterial road means a major road with access control, channelized intersections, restricted parking, and that collects and distributes traffic to and from minor arterials and from collector streets. (2) Collector road means a road that typically exceeds 800 ADTs and has the primary purpose of intersecting traffic from intersecting local road and handling movements to the nearest arterial road. A sec ondary function is to provide direct access to abutting properties. A road that connects local access roads to the highway systems major and high-speed arterial roads. The collector road provides both land access service and traffic service within residential subdivisions. (2) Collector road means a road whose primary function is to collect traffic from local roads and connect it to the arterial road system. County-road design classification is governed by section 26-3(e). (3) Local road (major) means a road in which the road typical number of average daily traffic (ADT) ranges from 401 to 800 and contains two or more access points. The primary purpose is to provide access to abutting properties and receiving traffic from minor local roads. (4) Local road (minor) means a road in which the typical number of average daily traffic (ADT) ranges from zero to 400 and has the primary purpose of providing access to abutting properties. This road normally terminates in a cul - de-sac, loop or other turnaround, with no more than two access points. Road right-of-way width means an the width of the applicable public right-of-way or private roadway easement within which utility installation, utility maintenance, road way construction, and roadway maintenance shall occur according to is distinct from the standards put forth in these regulations. constructed travel surface. The following are the required road rights-of-way and minimum road widths allowable: Required County road rights-of-way and travel-surface widths shall be governed by section 26-3(e). Private access dimensions shall be governed by section 32-229. A private road classification does not establish eligibility for County acceptance. Arterial roads: Roadway means the constructed vehicular travel surface and associated shoulders, drainage, and appurtenances within a public right-of-way or private roadway easement; ownership and maintenance status shall be stated separately. Right-of-way: 66 to 120 feet (as determined by the county engineer) Roadway design manual means the 2021 edition of the South Carolina Department of Transportation Roadway Design Manual, including any express County modification adopted by ordinance, for private-road geometric design under this article. A later edition shall not apply unless adopted by County Council. Road widths: 28 feet (as determined by the county engineer) Collector roads: Right-of-way: 66 feet Road widths: 24 feet Major local: Right-of-way: 50 feet Road widths: 22 feet Minor local and/or service roads: Right-of-way: 50 feet Road widths: 20 feet Chapter 32 | Draft 4.4 | 12 The above widths are driving surface widths and exclude widths added by curb and gutte r and/or asphalt valleys. Sanitary sewer means a constructed conduit connected with or as a sewer system for the carrying of liquids and solids other than stormwaters to a sanitary treatment facility. Setback means the required minimum distance between every structure and the lot lines of the lot on which it is located (measured from the road right-of-way at the front of the lot if the road right-of-way projects over the property line, and measured from the property lines on the remaining portions of the p roperty). SCDES means the South Carolina Department of Environmental Services, the state agency that succeeded to applicable environmental functions formerly administered by the South Carolina Department of Health and Environmental Control (DHEC). References in older permits, approvals, regulations, agreements, or other records to DHEC shall be understood to refer to SCDES where the applicable function or authority was transferred to SCDES. Setback means the required minimum distance between a structure an d the applicable property line, road right-of- way, or private roadway easement. Front setbacks shall be measured from the edge of the road right -of-way, not the edge of pavement; where frontage is on private access within a recorded private roadway easemen t, measurement shall be from the edge of that easement. Where no such right -of-way or easement exists, measurement shall be from the front property line. Applicable zoning setbacks and exceptions are governed by chapter 38. Setback line means the line indicating the minimum distance permitted between the property line or road right -of- way line, as applicable, and the building line. Sketch plan See Plat (plan). Storm sewer means a constructed conduit connected with or as a storm sewer system for the carrying of stormwaters to a water source. Stream means a flow of water in a channel or bed, such as a brook, creek or river. Street. See Public road. Student housing means residential development designed, approved, or operated principally for students in which individual beds or bedrooms are rented separately or occupancy and management are otherwise organized by individual bed or bedroom. A conventional dwelling unit rented as a whole unit is not student housing solely because one or more occupants are students. A fraternity house or sorority house is regulated as a group residential facility and is not student housing for purposes of this definition. Approved bed means a bed authorized by the applicable land-use approval and shown on the approved plan. Subdivider means any person, firm, corporation owner, agent, developer, or other legal entity who directly or indirectly attempts to subdivide land within the jurisdiction of this article. See also "developer." Subdivision means all divisions of a tract or parcel of land into two or more lots, building sites, or other divisions for the purpose (whether immediate of or future) of sale, lease, or building development; including all division divisions of land involving a new roadway or an alteration in an existing roadway. Also included are instances in which the further division, relocation of lot lines, or the rearrangement (including combinations of lots) of any lot or lots within a subdivision previously approved or recorded according to law. The alteration of any r oadways or the establishment of any new roads within any subdivision previously approved or recorded according to law. law is also included. A subdivision can include townhouses, condominium complexes, apartment complexes complexes, multi-family housing, and multi-family student housing. The following exceptions are included within this definition only for the purpose of requiring that the loca l planning agency be informed and have a record of the subdivision: (1) The combination or recombination of portions of previously platted lots where the total number of lots is not increased and the resultant lots are equal to the standards of the county; Chapter 32 | Draft 4.4 | 13 (2) The division of land into parcels of five acres or more where no new street is involved and plats of these exceptions must be received as information by the county planning commission which shall indicate that fact on the plats; and (3) The combination or recombination of entire lots of record where no new street or change in existing streets is involved. Terrain classifications Subdivision, major means classification of terrain by grade ranges any subdivision that does not qualify as follows: an exempt subdivision or a minor subdivision as defined in this chapter. Townhouse means a building or group of buildings containing a dwelling unit or units constructed in a series or group of attached units with property lines separating such units. Subdivision, minor means a subdivision that: Traditional septic systems means a waste disposal system designed for the treatment and disposal of domestic sewage by means of an onsite septic tank and soil absorption system utilizing a traditional drain field on a single lot. All such systems are subject to the review and approval of the South Carolina Department of Health and Environmental Control. (1) Results in no more than ten (10) lots, including any remainder parcel; Transfer or sale of lots means any means by which the ownership of a property changes hands; including, but not limited to, the purchase of trade of a property subject to a mortgage, the assumption of a mortgage debt by the property purchaser, and any exchange of possession of the property u nder a land sales contract or any other land trust device. (2) Does not require the construction of a new public road or private road as defined by this chapter; Utilities means utilities shall consist (3) Does not require the extension of any and all utility services public water or public sanitary sewer infrastructure intended to a subdivision, including water, sewer, storm sewer, electricity, telephone, cable television, gas, and sanitary sewerage, whether such utilities are supplied by a private indivi dual, private company, authority, or a governmental entity. serve additional lots; and (4) Does not require the construction of shared stormwater or drainage infrastructure intended to serve more than one lot. Townhouse means a building containing three or more attached single-family townhouse units. Townhouse unit means an individual single-family dwelling unit within a townhouse that extends from foundation to roof, is separated from adjoining townhouse units by common walls, and has a setback area or pub lic way on not less than two sides, whether conveyed as a separate lot, condominium unit, or other ownership interest. Traditional septic systems means a waste disposal system designed for the treatment and disposal of domestic sewage by means of an onsite septic tank and soil absorption system utilizing a traditional drain field on a single lot. All such systems are subject to the review and approval of the South Carolina Department of Environmental Services. Transfer or sale of lots means any means by which the ownership of a property changes hands; including, but not limited to, the purchase or trade of a property subject to a mortgage, the assumption of a mortgage debt by the property purchaser, and any exchange of possession of the property under a land sales contract or any other land trust device. Utilities means any and all utility services to a subdivision, including water, sewer, storm sewer, electricity, telephone, cable television, gas, and sanitary sewerage, whether such utilities are supplied by a private individual, private company, authority, or a governmental entity. View lane means the portion of a natural buffer utilized and maintained by the property owner to enhance observation of the lake and surrounding landscapes. Typically, the vegetat ion in the view lane is lower in height and/or smaller in diameter than that found in the rest of the buffer. Chapter 32 | Draft 4.4 | 14 Watercourse means any natural or artificial stream, river, creek, ditch, channel, canal, conduit, culvert, drain, waterway, gully, ravine, or wash in which water flows in a definite direction or course, either continuously or intermittently, and has a definite channel, bed, and banks and includes any area adjacent thereto subject to inundation by reason of overflow or floodwater. Yard means a space that lies between the principal building or buildings and the nearest lot line or road right -of- way, as applicable. The minimum required yard shall be unoccupied and unobstructed from the ground upward, except as may be expressly permitted. (1) Front yard means a yard situated between the front building line and the front lot line or road right -of-way, as applicable, extending the full width of the lot. (2) Rear yard means a yard situated between the rear building line and the rear lot line extending the full width of the lot. (3) Side yard means a yard between the side building line and a side lot line that extends from the front yard to the rear yard. (Ord. No. 2008-20, Art. 2, 12-16-2008; Ord. No. 2024-23, §§ 1, 2(Exh. A), 10-15-2024) Cross reference(s)—Definitions generally, § 1-2. 1-2; zoning and landscape terms incorporated in this article, § 38 - 12.2. These cross-references apply only to the terms and purposes expressly identified in this article. Sec. 32-213. Requirements and standards. (a) Unapproved plat prohibition. No plat of the subdivision of any land within the unincorporated areas of the county as now or hereafter established, and any incorporated municipality which contracts with the county for these regulations to be administered within such municipality, shall be filed with or recorded by the county register of deeds until such plat shall have been submitted to and approved by the county planning commission, planning director, or designee according to the procedures set forth in thi s article. No road or other way shall be accepted or maintained, nor shall any water line, sewerage, road lighting or similar improvements extended or connected, nor shall any permit be issued by any department of the county for any or other improvements i n any subdivision established hereafter which has not been approved by the county planning department and met such requirements as prescribed by the county council. (a) Unapproved plat prohibition. No subdivision plat or land-development plan subject to this article shall be filed or recorded with the Oconee County Register of Deeds until it has been approved and signed by the planning director or authorized designee in accordance with this article. Required improvements and permits remain subject to the applicable review procedures. Approval of a plan or plat does not constitute County acceptance of a road or other property interest. (b) Survey standards. Plats shall be prepared and survey data entered thereon in accordance with the most recent adopted version of the "Minimum Standards Manual of the Practice of Surveying in South Carolina" established by the South Carolina Board of Registration for Professional Engineers and Land Surveyors provided that all elevations information shall refer to Mean Sea Level Datum or other establish datum (a minimum of [Z] assumed elevation with two benchmarks). (b) Survey standards. Plats and survey data shall comply with the Standards of Practice Manual for Surveying in South Carolina, S.C. Code of Regulations, chapter 49, article 4, as applicable. Elevation information shall identify its vertical datum, and any assumed datum shall be identified as such. The project land surveyor shall establish and identify the benchmarks required by the applicable surveying standards. (c) Subdivision name. (1) All subdivision names must be submitted to the addressing office. Names must be easy to read and pronounce. Proposed names may be rejected by the addressing office if in the opinion of emergency response officials, pronunciation may impair an efficient response. Chapter 32 | Draft 4.4 | 15 (2) Subdivision names that may be confused as homonyms (having the same or similar pronunciation) of existing subdivision names shall not be approved. (3) Names that are vulgar, ethnically offensive, or otherwise problematic shall not be approved. (4) Subdivision names spelled in an unconventional, complex, or potentially confusing manner shall not be approved. (5) A subdivision shall be designated by only one name. (6) Special characters, including numbers, are not allowed. (7) No duplicates of existing subdivision names are allowed. (d) Utilities. When utilizing a road right-of-way, all utility lines shall be buried at a depth of at least 36 inches. Such lines shall be located a minimum of two feet outside the portion of th e road to be surfaced to prevent having to cut into the paved surface or reconstruct drainage structures to serve abutting properties. In order to prevent future road cuts, utility stub-outs shall be added to all utility lines extending beyond the roadway to each property line. (e) Road signs. Road name signs shall be installed at all intersections with a subdivision. All other signs shall be installed as required by and at the direction of the county engineer or his/her designee. All signage will be in accordance with the Manual of Uniform Traffic Control. The developer shall be responsible for all costs of road signage for private drives, private roads, and proposed county roads (at a cost determined by resolution of county council from time to time) prior to acceptance of road by the county. Any person who shall willfully or maliciously damage, deface, remove or otherwise tamper with a sign erected by a subdivider or the county designating the name of any county road shall be guilty of a misdemeanor. In ad dition thereto, such person shall be liable to the county for the cost incurred by the county as a result of said criminal acts. (e) Road names and signs. (1) Road names. Proposed road names shall be submitted for approval under chapter 26, article II, at the Preliminary Plan stage, where a Preliminary Plan is required. Required road names shall be approved before final subdivision approval. Assigned addresses required under section 26-111 shall be obtained before final subdivision approval. (2) Road signs. The developer shall install and pay for road-name and traffic-control signs required for private drives and private roads under sections 26-102, 26-106, 26-107, and 32-230 before final approval. A required load- limit sign may be documented by dated photographs and the project engineer’s certification identifying its location and content; no separate County visit is required solely to observe that sign. Sign requirements for a road proposed for County acceptance remain subject to chapter 26. (f) Family transfers. When no consideration, other than a nominal monetary amount and love and affection, is paid to the grantor of subdivisions resulting from family transfers as defined by this section of this article, the following shall apply: (1) Subdivision of parcels that results from the conveyance of parcels deeded by parents to children, children to parent, sibling to sibling, grandparents to grandchildren or grandchild to grandparent, and does not involve the construction or extension of any road, bridge, or drainage structure to provide access to interior lots, and does not involve the creation of any new drainage easement, shall be received as information only and approved administratively by the planning director. (g) Minor subdivision. (Reserved). subdivision review and approval. (h) Compliance with road standards. Road plans and supporting documentation needed to comply with all adopted the county road standards shall be included with the submission of subdivision plans. Approval of the subdivision shall not be granted unless all applicable road standards are met. Chapter 32 | Draft 4.4 | 16 (1) Applicability. The provisions of this subsection shall apply to all subdivisions meeting the definition of a minor subdivision contained in this chapter. Minor subdivisions shall be reviewed a dministratively and shall not require review or approval by the planning commission. (Ord. No. 2008-20, Art. 3(3.1[a.], 3.1[b.], 3.2—3.7), 12-16-2008; Ord. No. 2018-14, § 1(Att. A), 12-4-2018) (2) Submittal. An applicant proposing a minor subdivision shall submit a final plat to the planning department. The plat shall be prepared and sealed by a land surveyor licensed in the State of South Carolina and shall contain all information required by this chapter. (3) Review. The planning director or designee shall review the final plat for completeness and compliance with the requirements of this chapter and all other applicable laws and regulations. The planning director may distribute the plat to appropriate agencies for review and comment and may require addit ional information reasonably necessary to determine compliance with this chapter. Approval of a minor subdivision plat shall not constitute approval of any onsite wastewater disposal system. All permits required by the South Carolina Department of Environmental Services shall be obtained prior to issuance of any building permit. (4) Action. The planning director is authorized to approve, approve with conditions, or disapprove a minor subdivision plat. Approval shall be granted only upon a determination that the subdivision satisfies the definition of a minor subdivision and complies with all applicable provisions of this chapter. If the application is disapproved, the planning director shall provide the applicant with the reasons for denial. (5) Approval and recording. Upon approval, the planning director shall sign the final plat. The applicant shall record the approved plat in the Office of the Oconee County Register of Deeds. No lot shall be created or conveyed until the approved plat has been recorded. (6) Reclassification. If the planning director determines that a proposed subdivision does not qualify as a minor subdivision, the application shall be processed as a major subdivision in accordance with this chapter. (h) Minor subdivision limitations. (1) Purpose and intent. The purpose of this subsection is to preserve the availability of the minor subdivision process for limited land divisions while preventing the avoidance of the review requirements applicable to major subdivisions through phased, sequential, coordinated, or otherwise related divisions of contiguous parcels under common ownership. (2) Parent parcel. For purposes of this subsection, the parent parcel shall consist of all contiguous parcels under common ownership as they existed immediately prior to approval of the original minor subdivision. (3) Two-year limitation. Following the recordation of a minor subdivision plat, the parent parcel shall not be eligible for approval of another minor subdivision for a period of two (2) years unless the proposed subdivision is processed as a major subdivision in accordance with this chapter. The two -year limitation shall apply to the entire parent parcel regardless of any subsequent conveyance, transfer of ownership, subdivision, or division of the property. (4) Reestablishment of minor subdivision eligibility. Upon expiration of the two -year limitation, the parent parcel may again be considered for approval as a minor subdivision, provided the proposed subdivision independently satisfies the definition of a minor subdivision and all other applicable requirements of this chapter. The expiration of the two-year limitation shall not exempt a subdivision from any other provision of this chapter. (5) Simultaneous or related applications. Multiple subdivision applications involving the same parent parcel or contiguous parcels under common ownership that are submitted simultaneously, or during the same review period, shall be considered a single subdivision for purposes of determining compliance with this chapter. Applications involving the same parent parcel shall not be reviewed as separate minor subdivisions where the combined proposal would otherwise constitute a single subdivision under this chap ter. (6) Administrative determination. The planning director shall determine whether a proposed subdivision qualifies as a minor subdivision based upon the definition of minor subdivision, recorded plats, dates of recordation, parcel history, the extent of contiguous parcels under common ownership existing immediately prior to approval of the Chapter 32 | Draft 4.4 | 17 original minor subdivision, and all other applicable provisions of this chapter. A qualifying family transfer or five - acre informational exception identified in the definition of subdivision shall not, by itself, be counted to trigger major-subdivision review. If the planning director determines that a proposed subdivision does not qualify as a minor subdivision, the application shall be processed as a major subdivision in accordance with this chapter. (i) Compliance with road standards. Road plans and supporting documentation needed to comply with applicable private-road standards under this chapter or public-road standards under chapter 26 shall be included with the subdivision plans. Approval of the subdivision shall not be granted unless all applicable road standards are met. Sec. 32-214. Lot improvements. (a) Lot arrangements. All lots shall be arranged such that there will be no apparent difficulties in securing driveway encroachment permits or building permits for reasons of topography or other conditions and must have driveway access from an approved road. The developer shall be liable for all lots within a proposed subdivision. (b) Lot dimensions. Except where circumstances such as topography, watercourses, road alignment or existing site boundary configurations dictate otherwise, the following requirements shall apply: (1) Dimensions of corner lots shall be large enough to allow for the erection of bui ldings observing the minimum yard setbacks from both streets, without encroaching into side and rear yard setbacks, established in the building line section of this chapter. (2) Depth and width of properties reserved or laid out for business, commercial, o r industrial purposes shall be adequate to provide for off-street parking and loading facilities required for that type of development, without encroaching into yard setbacks. (c) Lot size. Minimum lot size shall be determined by the underlying zoning dist rict located in chapter 38. All required setbacks shall be met regardless of lot size. No part of a septic system shall be located within any road right-of-way. (d) Building lines. (See Applicable zoning setbacks and exceptions are governed by section 38-10.2 for all setback 38-9.3 and article 10 of chapter 38. General Use District requirements are contained in the control free district of the county.) section 38-10.2. (e) Reserved. (f) Usable area. All lots adjacent to floodplains, creeks, and wetlands sho uld use these natural features as lot boundaries when possible. Lots containing areas unsuitable for usage shall not use these areas in calculating minimum lot area. (g) Septic system setback. (1) Traditional septic systems shall be constructed so that they comply with all regulations of the South Carolina Department of Health and Environmental Control (DHEC). Services (SCDES). (2) The applicant shall provide the planning director a copy of all South Carolina Department of Health and Environmental Control (DHEC) Services (SCDES) permit drawings and an approved DHEC SCDES permit application for the proposed septic systems utilized within the development. (3) The developer must demonstrate to the planning director that the proposed development will not adverse ly affect the present water table and the existing water supplies; and also demonstrate that the proposed water supply system will not be adversely affected by existing septic systems. (3) Reserved. (h) Lot drainage. Lots shall be laid out so as to provide positive drainage away from all buildings, and individual lot drainage shall be coordinated with the general storm drainage pattern for the area. Drainage shall be designed so as to prevent concentration of stormwater from each lot to any adjacent proper ty. Drainage systems used to control water on one property shall not increase the water flow on adjacent properties without legal easements. Chapter 32 | Draft 4.4 | 18 (i) Lakes and streams. If a tract being subdivided contains a water body, or portion thereof, the ownership of and the responsibility for safe and environmentally compliant maintenance of the water body is to be placed so that it will not become a local government responsibility. The minimum area of a lot required under this article may not be satisfied by land that is under water. Where a watercourse other than storm drainage separates the lot's buildable area from the road providing access, an engineer's certified structure shall be provided linking the buildable area to the road. All watercourses shall remain free of obstructions and degradations. (j) Easements. Easements having a minimum width of ten feet and located along the side or rear lot lines shall be provided as required for utilities and drainage. (k) Entrances. One entrance is required for every 100 lots in a proposed subdivision, or a maximum of 100 lots on a dead end road with a cul-de-sac. This requirement may be waived by the planning director due to topography and feasibility. Every effort shall be made to not have an entrance directly onto an arterial road. (l) Reserved. (Ord. No. 2008-20, Art. 4(4.1—4.12), 12-16-2008; Ord. No. 2015-15, § 1(Att. A), 6-2-2015; Ord. No. 2018-26, § 1(Att. A), 10-2-2018) Sec. 32-215. Blocks. (a) Residential block length. In order that there may be convenient access between various parts of a subdivision and in order to help prevent traffic congestion and undue inconvenience, the length of blocks hereafter established should not exceed 1,800 feet and shall not be less than 600 feet; provided, however, that such length may be modified when appropriate due to the topography or physical shape of the property being subdivided. (b) Residential block width. Blocks shall have sufficient width to allow two tiers of lots. Blocks may be one lot in depth at the boundary of the subdivision, or where single-tier lots are required to separate residential development from through vehicular traffic or nonresidential uses. (Ord. No. 2008-20, Art. 5(5.1, 5.2), 12-16-2008) Sec. 32-216. Drainage and stormwater. (a) General requirements. In most cases the land disturbance permit required by DHEC will have considered the information needed for compliance with this section. However, the county will review the information to ensure that all stormwater runoff will be removed from proposed developments in perpetually maintained drainage systems designed to avoid damage to personal property. The planning director shall not approve any plat of subdivision which fails to make adequate provision for storm or floodwater runo ff channels or basins. Stormwater drainage systems shall be separate and independent of any sanitary sewer system. Inlets shall be provided so that surface water is not carried across or around any road intersection except where routing around of small vol umes is approved in writing by the county engineer. (a) General requirements. In most cases the land disturbance permit required by SCDES will have considered the information needed for compliance with this section. However, the county will review the information to ensure that all stormwater runoff will be removed from proposed developments in perpetually maintained drainage systems designed to avoid damage to personal property. The planning director shall not approve any plat of subdivision which fails to make adequate provision for storm or floodwater runoff channels or basins. Stormwater drainage systems shall be separate and independent of any sanitary sewer system. Inlets shall be provided so that surface water is not carried across or around any road intersection except where routing around of small volumes is approved in writing by the County Engineer or designee. (b) Nature of stormwater facilities. The applicant may be required by the planning department or county engineer to carry away by pipe or open ditch any spring or surface water that may exist either previously to, or as a result of the subdivision. Such drainage facilities shall be located in the road right -of-way where feasible, or in perpetual unobstructed easements of appropriate width, and shall be constructed in accordance with accepted engineering Chapter 32 | Draft 4.4 | 19 standards and specifications as approved by the county engineer. All swales, ditches, or other open drainage shall be constructed and established to minimize erosion as approved by the coun ty engineer. (b) Reserved. (c) Accommodation of upstream drainage areas. The owner's project engineer shall determine, certify, and design drainage facilities that are large enough to accommodate potential runoff from its entire upstream drainage area, whether inside or outside the subdivision. (d) Effect on downstream drainage areas. The owner's project engineer shall study and provide the planning director and county engineer County Engineer or designee with sufficient data proving that there are no adverse impacts on existing downstream drainage facilities outside the area of the subdivision. Where it is determined that the additional runoff incident to the development of the subdivision will overload an existing downstream drainage facility, the planning director may withhold approval of the subdivision until provision has been made for the improvement of said potential condition. (e) Floodplain areas. Floodplain areas shall be noted on all plans and plats for proposed development, and shall be preserved from any and all destruction or damage resulting from clearing, grading or dumping of earth, waste material, or stumps, unless explicitly permitted by DHEC, SCDES, or other appropriate state agency. All construction activity within a development shall comply with standards of the county floodplain ordinance. (1) Where a subdivision is traversed by a watercourse, drainageway, channel, or stream, there shall be provided a stormwater easement or drainage right-of-way conforming substantially to the lines of such watercourse, and of such width and construction or both as will be adequate for the purpose and to accommodate maintenance equipment and activities. Wherever possible, it is desirable that the drainage be maintained by an open channel with landscaped banks and adequate width for maximum potential volume of flow. The planning department will review the information required by the DHEC SCDES land disturbance permit to ensure the intentions requirements of 6.12 this subsection are met. (2) Where topography or other conditions are such as to make impractical the inclusion of drainage facilities within road right-of-way, perpetual unobstructed easements at least 20 feet in width for such drainage facilities shall be provided across property outside the road lines and with satisfactory access to the road. Easements shall be indicated on all plats. Drainage easements shall be carried from the road to a natural watercourse or to other approved or adequate drainage facilities. (3) When a proposed drainage system will increase the maximum flow of water across private land outside the subdivision, appropriate drainage rights must be secured and indicated on the plat. (4) Low-lying lands along watercourses subject to flooding or overflowing during storm periods, inclu ded in areas for dedication, shall be preserved and retained in their natural state as drainage ways except where improvements such as grassing, walkways, and playground areas are specifically approved by the planning director. (4) Reserved. (5) All rights-of-way shall contain a permanent drainage easement for all water runoff from the road right -of-way as deemed necessary by the county engineer. County Engineer or designee. It shall be the responsibility of the owner/developer to acquire any necessary drainage easements from private landowners. (Ord. No. 2008-20, Art. 6(6.1—6.5), 12-16-2008) Sec. 32-217. Water facilities. (a) General requirements. (1) Where a public water main is within 1,000 feet of a subdivision boundary, the developer shall connect ther eto and install adequate central water facilities. Where the accessible public water main is six inches or greater in diameter, distribution lines shall be at least six inches in diameter. In the event that the water supplier certifies the existence of insufficient water pressure to provide service to six-inch distribution lines to the site, the planning Chapter 32 | Draft 4.4 | 20 director shall permit appropriate reductions in the diameter of distribution lines. In cases along permanent cul -de- sacs or circles less than 1,000 feet in length, a minimum diameter of 2½ inches is permitted. (1) Where the developer elects to connect to a public water main, adequate central water facilities shall be installed. Where the accessible public water main is six inches or greater in diameter, dis tribution lines shall be at least six inches in diameter. In the event that the water supplier certifies insufficient water pressure to provide service to six-inch distribution lines at the site, the planning director shall permit appropriate reductions in distribution-line diameter. Along permanent cul-de-sacs or circles less than 1,000 feet in length, a minimum diameter of 2½ inches is permitted. (2) Water distribution systems shall be approved by the designated utility entity and the appropriate division of DHEC. SCDES. (3) The location and design of all water system improvements shall be shown on the preliminary plat, and the cost of installing same shall be included in any bond to be furnished by the developer. (4) All utility lines shall be located a minimum of two feet outside of road surface areas at the edge of the rights -of- way and shall be buried at a depth of at least 36 inches. When the sewer line is located in a road right -of-way and it will be necessary to cut into the road surface to serve the abutting lots, a connection shall be stubbed out to the property line to serve each lot prior to surfacing the road. (b) Individual wells and central water systems. If a public water system is not available, wells Wells may be used or a package central water system provided in such a manner that an adequate supply of potable water will be available to every lot in the subdivision. Central water systems shall be approved by the appropriate division of DHEC. SCDES. Orders of approval shall be submitted to the planning department. (c) Fire hydrants. Fire hydrants shall be required for all major subdivisions except where individual wells are used or a water main of less than six-inch diameter is permitted, and shall be located as defined in the adopted fire code and shall be approved by the applicable fire protection entity. In the event no adequate water supply is available, alternative methods of fire protection may be approved by appropriate fire officials, provided such measures are provided for under comply with the adopted fire code. To avoid future road cutting, all underground utilities for fire hydrants, together with the fire hydrants themselves hydrants, and all other supply improvements shall be installed and approved before any final paving of a road shown on the subdivision plat. (d) Wastewater facilities. (1) Where a public sanitary sewerage system is reasonably accessible and available, the applicant shall connect with same and provide sewers accessible to each lot in the subdivision. When the sewer line is located in a road right-of-way and it will be necessary to cut into the road surface to serve the abutting lots, a connection shall be stubbed out to the property line to serve each lot prior to surfacing the road. (1) When a sewer line is located in a public road right-of-way or private roadway easement and it will be necessary to cut into the road surface to serve abutting lots, a connection shall be stubbed out to the property line to serve each lot before the road is surfaced. (2) Sanitary sewer shall be designed and installed to the design standards and specifications of the city, county, or public service district into whose sewer system the subdivision is connecting and all design standards and specifications of the appropriate DHEC SCDES division. (3) Where public sanitary sewerage systems are not reasonably accessible or available, package, central or individual waste collection/treatment systems may be provided. These systems must be approved by the appropriate division of DHEC prior to approval of any preliminary subdivision plan. (3) Package, central, or individual wastewater collection or treatment systems may be provided instead of a connection to public sanitary sewer. These systems shall be approved by the appropriate division of SCDES before approval of any preliminary subdivision plan. (Ord. No. 2008-20, Art. 7(7.1—7.4), 12-16-2008) Chapter 32 | Draft 4.4 | 21 Sec. 32-218. Nonresidential subdivisions. (a) General. If a proposed subdivision includes land that is proposed for commercial, industrial or other nonresidential purposes, the layout of the subdivision shall incorporate such provisions and facilities as required by the standards set forth in subsection (b), below. (b) Standards. In addition to the principles and standards in these regulations, which are appropriate to the planning of all subdivisions, the applicant shall demonstrate to the satisfaction of the commission that the road, parcel, and block pattern proposed is specifically adapted to the uses anticipated and takes into account other uses in the vicinity. The following principles and standards shall be observed: (1) Proposed nonresidential parcels shall be suitable in area and dimensions to the types of industrial/commercial development anticipated. (2) Road rights-of-way and pavement shall be adequate to accommodate the type and volume of traffic anticipated to be generated. (3) Special requirements may be imposed by the county with respect to road, curb, gutter, and sidewalk design and construction. (3) Reserved. (4) Every effort shall be made to protect adjacent residential areas from p otential nuisances from a proposed commercial or industrial subdivision, including the provision of extra depth in parcels backing up on existing or potential residential development and provisions for a permanently landscaped buffer strip when necessary. (4) Reserved. (5) Roads carrying nonresidential traffic, especially truck traffic, shall not normally be extended to the boundaries of adjacent existing or potential residential areas. (Ord. No. 2008-20, Art. 8(8.1, 8.2), 12-16-2008) (c) Private internal roads serving commercial, industrial, or other nonresidential land development shall comply with the applicable private-access standards of this article based upon the type and intensity of development, projected traffic, design vehicle, and emergency-access requirements. A road proposed for county acceptance shall comply with chapter 26. Required landscape and buffer standards shall comply with the applicable provisions of this chapter and chapter 38. Sec. 32-219. Security in lieu of completion of improvement. In lieu of the completion of the physical development and installation of the required improvements prior to the final plat approval, the county may accept a financial guarantee in the form of cash, bond, or escrow letter of credit with an approved financial institution, in an amount and with conditions satisfactory to it, securing to the county the actual construction and installation of such improvements and utilities within a period specified by the county engineer. County Engineer or designee. (1) If the subdivider wishes to have a final plat approved prior to the installation, inspection and approval of all required improvements he improvements, the subdivider may file a performance of or surety bond executed by a surety company licensed to do business in the State of South Carolina, in an amount equal to 125 percent of the owner's engineer (and project engineer’s estimated cost, as verified by the county engineer) estimated cost County Engineer or designee, to complete the improvements. The bond shall guarantee the completion of all improvements within a time prescribed by the planning director. (2) If the subdivider wishes to have a final plat approved prior to the in stallation, inspection and approval of all required improvements, he the subdivider may establish an escrow account with the county into which the subdivider shall place, prior to the sale of any lot in the subdivision, an amount equal to 125 percent of th e owner's engineer (verified project engineer’s estimated cost, as verified by the county engineer) estimated cost County Engineer or designee, to complete the improvements. Funds in such escrow account shall be returned to the Chapter 32 | Draft 4.4 | 22 subdivider following completion of all improvements within time limits prescribed by the county engineer. County Engineer or designee. The final determination for returning the escrowed money to the developer shall be made by the county engineer. County Engineer or designee. (3) In the event that required improvements are not completed, inspected and approved within the required time, the county may expend escrowed funds, securities, or performance bond funds to complete the required improvements. The planning director may also, at his the planning director’s discretion, withhold building permits or occupancy permits in such subdivision until such improvements are completed. In completed, in which case, case it shall then be unlawful to sell any further lots in the subdivision until all improvements are completed. No occupancy permits shall be issued within the subdivision, unless street road improvements are at least adequate for vehicular access by the prospective occupant(s) and by the emergency vehicles and personnel. (4) No building permit shall be issued for the final ten percent of lots in a subdivision, or if ten percent be less than two, for the final two lots of a subdivision, until all public improvements required by the county engineer County Engineer or designee for the subdivision have been fully completed and the county has accepted all as -built drawings. (5) The developer shall be required to maintain all required public improvements on the individual subdivided lots, if required by the planning director, until acceptance of the improvements by the appropriate utility or government entity. If there are any certificates of occupancy on a street road not dedicated to the county, the county may on 12 hours notice effect emergency repairs and charge those costs to the developer . (6) Surety bonds will be returned to the developer following delivery of all as -built drawings to the county engineer, County Engineer or designee, and after acceptance of all improvements by the county. (Ord. No. 2008-20, Art. 9, 12-16-2008) Sec. 32-220. Plat requirements and review procedures. (a) General. No lot proposed to be created through the creation of a subdivision shall be sold until a final plat showing the subdivision has been approved by the planning director, and has been recorded with the county Register of Deeds. (b) Application review. The planning director may approve a minor or exempt subdivision, containing no new roads, after reviewing the final plan. (b) Application review. The planning director may approve a minor subdivision, or a division qualifying for an informational exception within the definition of subdivision in section 32 -212, after reviewing the final plat or informational plat as applicable. A proposal that does not qualify as a minor subdivision or an informational exception shall be processed under the applicable major-subdivision or land-development procedures. Townhouse, condominium, and apartment projects, including rental projects, shall undergo applicable land - development review of the site and common improvements whether or not separately owned lots are created. (c) Plat recordation. The planning director's approval of a subdivision final plan is contingent on submission of four original copies of the plat to the county Register of Deeds, and recordation of the pla t by the Register of Deeds. An authorized copy of the recorded plat shall be submitted to the planning director. (c) Plat recordation. The planning director or authorized designee shall approve and sign the final plat before it is submitted to the Oconee County Register of Deeds for recording. Four original approved copies shall be submitted for recording, and an authorized copy of the recorded plat shall be provided to the planning director. (d) Appeal of decision. Any person aggrieved by the planning director's A staff decision to approve or deny an application for subdivision approval under this section may appeal the decision be appealed to the planning commission in writing within ten working days of said decision as outlined in [section 32 -223((d)], of this article. under section 32-224. (Ord. No. 2008-20, Art. 10(10.1—10.4), 12-16-2008) Chapter 32 | Draft 4.4 | 23 (e) Statutory action period. The administrative review periods and outside-agency extensions in sections 32-221 through 32-223 shall not extend the sixty-day action period in S.C. Code 1976, § 6-29-1150(A), measured from receipt of the plans or plats and all required documentation, unless the applicant and County mutually agree to an extension. The statutory effect of failure to act within that period remains applicable. Sec. 32-221. Sketch plan. (a) Sketch plan review conference. All persons intending to subdivide or develop property are strongly encouraged to confer with the planning director prior to proceeding. Proposed developments consisting of 20 new housing units shall schedule a sketch plan review prior to any formal application. (a) A preapplication conference is encouraged for all proposed subdivisions and land developments. A sketch plan shall be submitted before a formal application for any major subdivision or land development containing 11 or more lots, dwelling units, or other units of development, including multifamily and student housing development. (b) Basic sketch plan (optional requirements for developments less than 20 units.) (b) An applicant for a subdivision or land development not subject to subsection (a) may submit a basic sketch plan for staff review before filing the formal application. (1) The sketch plan shall be drawn to show the approximate layout of the proposed subdivision and its relationship to the surrounding area. (c) A detailed sketch plan required by subsection (a) shall show t he proposed development as a whole and any anticipated phases. The plan shall be drawn at a scale sufficient to clearly show the proposal and shall include, as applicable: (1) total acreage and the number of proposed lots, dwelling units, buildings, and ot her units of development; (2) the general arrangement and location of proposed lots, buildings, structures, common areas, and principal site features; (3) existing property lines, easements, road rights -of-way, private roadway easements, buildings, and significant site features; (4) existing and proposed roads, private roads, drives, access points, and pedestrian connections; (5) topographic information sufficient to evaluate the proposal; (6) scale, north arrow, and date; (7) owner, applicant, and professional contact information; (8) watercourses, known wetlands, floodplains, and other significant environmental features; (9) proposed uses and their relationship to adjoining property; (10) proposed water, wastewater, stormwater, and utility service; (11) pr oposed landscaping, buffers, screening, open space, and common areas; and (12) proposed parking and internal circulation. (2) Sketch plans are informal, exploratory examinations of a proposed idea. The planning director will review the proposed layout and discuss any issues with the subdivider and may require a detailed sketch plan to be submitted. (d) The planning director shall provide composite staff comments within 15 business days after receipt of a complete sketch-plan application. Where review by an outside agency is necessary and additional time is reasonably required, the planning director may extend the review period by not more than ten additional business days and shall notify the applicant of the extension and reason. (c) Detailed sketch plan (required for 20 or more units) (1) The sketch plan shall be drawn at an approximate scale of not less than a scale of 200 feet to one inch and shall include a vicinity map at a scale of not less than two miles to one -inch showing the relationship of the proposed subdivision to the surrounding areas. (2) All sketch plan submittals shall include the following in sketch or narrative form: a. An accounting of total acreage in the tract to be divided and number of lots proposed; b. Arrangement, shape, dimensions, and area of proposed lots; c. Location of existing property lines, easements, road right-of-ways, buildings, or other public ways adjoining the tract to be subdivided; d. Alignment, right-of-way width, and clarification of proposed roads; Chapter 32 | Draft 4.4 | 24 e. Topography by contour at intervals of not more than 20 feet (as from USGS quad sheets); f. Map scale, north arrow, and date; g. Name/address/telephone number of legal owner or agent and the professional (surveyor or engineer) who will undertake detailed subdivision layout and improvements design; h. Location of watercourses and land subject to flooding based on a 100 -year frequency flood. Owner's surveyor shall indicate if property is or is not in a floodplain; i. The existing and proposed uses of land throughout the subdivision; j. Proposed method of water supply and wastewater treatment and other utility service; k. The proposed name of the subdivision. (3) A subdivider shall submit a sketch plan of the entire tract even if the subdivider's present plans call for the actual development of only a part of the property. All phases of the subdivision must be shown on the sketch plan and marked as future development. (4) Prior to sketch plan submittal, the subdivider is encouraged to interact with the county soil and water conservation district to obtain soil survey information and written site evaluation comments to be included as part of the sketch plan submittal. (d) Sketch plan review. (1) A subdivider shall submit sketch plan copies and application forms in quantities specified by the planning director. The planning director shall obtain input from the county engineer and affected agencies and shall provide comments in the form of a composite list to the subdivider within 15 working days of sketch plan submitted. (2) If the subdivider disagrees with comments provided, the subdivider may request an informal review by the planning commission in accordance with the county planning commission rules of procedure. (3) In reviewing a sketch plan and sketch plan comments, the planning commission may affirm such comments or modify them to the extent as such modifications do not depart from the provisions of these adopted regulations. (Ord. No. 2008-20, Art. 11(11.1—11.4), 12-16-2008) Sec. 32-222. Preliminary plan and supporting data. plan. (a) Submittal requirements. Applicability and submittal. (1) Applications for preliminary approval of a subdivision shall be submitte d to the planning director for review. (1) A preliminary plan is required for each major subdivision and for each land development containing 11 or more lots, dwelling units, or other units of development, including multifamily and student housing develop ment, unless another provision of this chapter establishes a more specific review procedure. (2) The applicant shall submit all appropriate fees at the time of application. (2) The application shall include four printed copies of the proposed preliminary plan and one digital copy in a format approved by the planning director. Printed copies shall be to scale and shall correspond to the scale identified on the plan. (3) Applications shall include four copies of the proposed preliminary plan. (3) Where public or central water, public sanitary sewer, or another centralized wastewater system is proposed, the applicant shall submit written confirmation from the applicable utility provider or service authority that the proposed service is available, including any conditions, limitations, required extensions, or improvements. Evidence of SCDES or other state approval shall be provided at the stage required by applicable law. (4) The applicant shall submit all responses, amended plans, additional information, o r any other necessary materials to satisfy all adopted the county regulations. Chapter 32 | Draft 4.4 | 25 (4) Construction, including clearing, grubbing, grading, road, drainage, and utility construction, shall not begin before preliminary plan approval authorizes the particular work. A state land-disturbance permit does not itself authorize construction under this chapter. Surveys, soil tests, and investigations that do not constitute site construction may proceed subject to applicable law. (5) An applicant may withdraw an application for subdivision approval at any time by submitting written notice to the planning director. (b) preliminary plan requirements. (6) It (1) The preliminary plan shall be unlawful for construction prepared at a scale sufficient to commence prior to preliminary approval of the plan as defined in this article. clearly and legibly show all required information and shall include a vicinity map. No sheet shall exceed 24 inches by 36 inches. (7) Preliminary approval typically permits a developer to proceed with the construction of all roads, utilities, and public infrastructure. (2) Existing contours shall be shown at intervals not exceeding five feet. Where grading, drainage, road design, or other site conditions require additional detail, contours not exceeding two feet may be required. (8) A copy of a preliminary letter of approval from the appropriate division of the South Carolina Department of Health and Environmental Control (DHEC) shall be required for subdivisions served in part of in whole by individua l onsite septic systems. (3) The plan shall show, as applicable: (a) total acreage and the number of lots, dwelling units, buildings, and other units of development; (b) the layout of proposed roads, rights -of-way, private roadway easements, crosswalks, road names approved in accordance with chapter 26, article II, grades, and cross sections; (c) the layout and dimensions of proposed lots, buildings, structures, common areas, utility easements, and principal site features; (d) building locations and footprints, applicable setbacks, and lot or block identification; (e) existing and proposed water, wastewater, stormwater, and utility facilities; (f) proposed parking, circulation, pedestrian facilities, landscaping, screening, and buffers; (g) proposed major contour changes and any grading or mass-grading plan required by section 32-236; and (h) other information reasonably necessary to determine compliance with this chapter. (9) An electronic copy of the proposed development plan showing the layout of the subd ivision in an approved format (4) A project containing multiple uses shall show all project components and file extension shall be required. shared infrastructure on one coordinated plan. (10) Properties designed to access state roads shall submit to and r eceive conditional approval from the South Carolina Department of Transportation ("SCDOT") prior to receiving final approval from the Oconee County Planning Department. All SCDOT comments shall be incorporated in the plans submitted to the county. (c) Review procedure. (b) Preliminary plan requirements. (1) The planning director shall issue a written approval, conditional approval, or denial within 25 business days after receipt of a complete preliminary plan application and all required supporting docume ntation. The written decision shall identify the basis for any condition or denial. (1) General. The preliminary plan shall include the following: (2) Where review by an outside agency is necessary and additional time is reasonably required, the planning director may extend the review period by not more than ten additional business days and shall notify the applicant of the extension and reason. a. The preliminary plan shall be drawn at a scale of 200 feet to one -inch or greater, and shall include a vicinity sketch at a scale of not less than one-inch = two miles. Sheet sizes should be 8.5 inches x 11 inches, 8.5 inches x 14 inches, 11 inches x 17 inches, 18 inches x 24 inches, or 24 inches x 36 inches. This map and supporting data shall be Chapter 32 | Draft 4.4 | 26 prepared according to standards set forth in this article and shall contain the following sections: General, existing conditions, and proposed conditions. (3) Conditional approval shall identify the work, if any, authorized before all conditions are satisfied, the conditions required before construction, and the conditions required before final approval. Construction not expressly authorized shall not begin. b. The proposed name of the subdivision, name/address/telephone of owner and/or subdivider, and name/address/telephone of surveyor and/or engineer. (4) Revised exhibits required by a conditional approval shall be submitted within 20 business days unless the written approval establishes another period for good cause. c. A graphic scale, north arrow and date (north arrow shall be identified as magnetic, true, or grid). (5) preliminary plan approval is valid for one year. Upon written request submitted before expir ation, the planning director may grant one extension for a period not exceeding one additional year. d. The acreage to be subdivided. (6) A person aggrieved by a decision of the planning director under this section may appeal in accordance with section 32-224. e. The boundaries of the tract to be subdivided with all bearings and distances indicated. f. A SC DHEC approved stormwater pollution prevention plan (SWPPP). g. The following statement: "NO COUNTY BUILDING PERMITS SHALL BE ISSUED FOR PROJECTS ON INDIVIDUAL LOTS PRIOR TO THE RECORDING OF A FINAL PLAT IN THE OFFICE OF THE REGISTER OF DEEDS" (2) Existing conditions. The preliminary plan shall include the following: a. Deed record names of adjoining property owners or subdivisions. b. Location of watercourses and land subject to flooding based on a 100-year frequency flood. Owner's surveyor shall indicate if property is or is not located in a floodplain. c. Location of adjoining property lines and existing building on the property to be subdivided. d. Location and right-of-way of roads, railroads, and utility lines either on or adjoining the property to be subdivided. e. Size and location of existing sewers, water mains, drains, culverts, or other underground facilities within the site and adjoining the tract. f. The acreage of each drainage area affecting the proposed subdivision. g. Topography by contour at intervals of not more than 20 feet (as from USGS Quad maps). h. Elevations shall refer to sea level or assumed elevation with a minimum of Z bench mark near the site. i. Location of city and county line, if applicable, and a statement identifying the location of the nearest central water and sewer lines and fire department and the distance from same to the tract being subdivided. (3) Proposed conditions. The preliminary plan shall include the following: a. Total number of lots, total acreage, total length of new roads. b. Layout of roads including all right-of-way, public crosswalks, road names or designations, grades, and cross sections. c. Profile of proposed roads showing natural and finished grades. d. Layout of all lots, including area; building setback lines, scaled dimensions of lots; lot and block numbers, utility easements with width and use. Chapter 32 | Draft 4.4 | 27 e. Construction plan of sanitary sewers (if applicable) with grade, pipe size, and location and permit to construct from DHEC and approval of the appropriate utility provider. f. Storm sewers shall be sized to accommodate runoff based upon the ten -year design storm except road crossings shall be a minimum of 25-year design storm. g. Construction plan for water supply system (if applicable) with pipe size and location of hydrants and valves and permit to construct from DHEC and, where applicable, approval of the appropriate utility provider. h. Designation of all land to be reserved or dedicated for public use. i. Designation of proposed use of all lots. j. Proposed major contour changes in areas where substantial cut and/or fill is to be done. Note: Refer to survey requirements. (c) Preliminary review procedure. (1) The planning director shall notify all appropriate review agencies for comments. These may include, but are not limited to, the following: a. Appropriate division of DHEC. b. Soil and water conservation office. c. Appropriate public service district or city as applicable. d. County public works department. e. Appropriate fire protection entity. f. County engineer. g. Oconee County Sewer Commission. h. Oconee County School District. (2) Agencies and departments shall provide written comments to the planning director within 15 working days of the date of the preliminary plan application. (3) The planning director shall render a decision within 25 working days of the date of prelimina ry plan application. The planning director's action and reasons therefore shall be transmitted in writing to the subdivider. (4) Agencies and departments shall provide written comments to the planning director within 15 working days of the date of the preliminary plan application. (5) Once the submitted plans are deemed to be in compliance with all applicable the county ordinances, the applicant shall be notified in writing that the plans have been preliminarily approved. (6) The planning director may grant conditional preliminary approval to insure compliance with all county ordinances. All such conditions shall be met prior to final approval. (7) If a plan is approved subject to conditions, the subdivider shall submit plan exhibits amended to incorpora te such conditions within 20 working days of such approval. Preliminary plat approval shall be effective for one -year provided the commission may extend same for up to one additional year upon written request from the subdivider. (8) A subdivider, or other party materially affected by the planning director's decision, may appeal for review by the planning commission. Such appeal shall detail the reasons therefore, and be made in writing within ten working days of the planning director's action. Affected parties shall be notified in writing of the planning commission's determination. The planning commission's decision may be appealed to the circuit court within 30 days after the actual notice of the commission's decision. (9) Variances shall be considered by the planning commission pursuant to Section 1-5.5(3) of the United Performance Standards Ordinance and conducted in a manner consistent with standards put forth in the Oconee County Planning Commission Rules of Procedure. Chapter 32 | Draft 4.4 | 28 (Ord. No. 2008-20, Art. 12(12.1—12.3), 12-16-2008; Ord. No. 2022-22, § 1, 12-6-2022; Ord. No. 2023-09, § 1, 6-6- 2023) Sec. 32-223. Final plan. (a) Submittal requirements. (1) A person seeking final plan application shall include all or an approved phase of the major subdivision or land development for which preliminary plan approval of a subdivision shall submit an application to the planning director for review of this article. was granted. (2) The applicant final plan shall also submit all appropriate fees at conform to the time approved preliminary plan and any conditions of application. approval. Material changes require amended approval before final approval. (3) Where the improvements required by this article and the preliminary plan have not been completed prior to the submission of the final plan for approval, approval of the plan shall be subject to the owner filing a performance guarantee in the form of cash and/or surety with the county according to the provision set forth in this article. (3) The applicant shall submit the number of printed and digital copies required by th e planning director, together with all supporting documentation required by this section. (4) Upon 90 percent completion of the construction of road and utilities of a preliminarily approved subdivision, a final "as built" plan shall be submitted to the planning director noting any changes from the preliminarily approved plans. (4) Upon completion of improvements required for final approval, the applicant shall submit a final as -built engineering plan identifying material changes from the approved preliminary plan. The project engineer shall submit the signed and sealed construction certification required by this chapter for improvements actually completed. An improvement secured by an accepted performance guarantee under section 32 -219 shall not be certified as completed until construction is complete. (5) The planning director's Where individual septic waste disposal is proposed, the applicant shall provide documentation of final subdivision approval of a final plan is contingent on submission of four original stamped copies of from the plat to the county Register of Deeds. appropriate SCDES division identifying each lot approved. (6) A copy of the recorded plat authorized by the Register of Deeds Before final approval, assigned addresses shall be submitted to the planning director. obtained as required by section 26-111. (7) Where individual septic waste disposal a private road is proposed, the developer applicant shall provide a letter of submit the recorded private-road maintenance instrument required by this chapter before final subdivision approval from the appropriate division of DHEC identifying each lot for which individual waste disposal is approved. approval. (b) Final plan requirements. The (8) A final plan plat shall include be approved and signed by the following: planning director prior to recordation with the Oconee County Register of Deeds. (1) If the final plan is drawn in two or more sections, each section shall be accompanied by a key map showing the location of the several sections. Final plans shall be drawn at a scale of no less than 100 feet to one inch; shall be drawn on sheets 8.5 inches x 11 inches, 8.5 inches x 14 inches, 11 inches x 17 inches, 18 inches x 24 inches, or 24 inches x 36 inches; shall be prepared according to the standards set forth in this article. (9) Following recordation, the applicant shall submit an authorized copy of the recorded plat to the planning director. (2) Name of owner of record. (b) Final plan requirements. The final plan shall include the following information, as applicable to the subdivision or land development: (3) Name of subdivision and identification number assigned, date, north arrow, and graphic scale. Chapter 32 | Draft 4.4 | 29 (1) If drawn in two or more sections, each section shall be accompanied by a key map. The fin al plan shall be prepared at a scale sufficient to clearly and legibly show all required information. No sheet shall exceed 24 inches by 36 inches. (4) Name, registration number, and seal (2) Name of registered surveyor. the owner of record. (5) Sufficient surveying data to determine readily and reproduce accurately on the ground the location, bearing, and length of every road line, lot line, easement, boundary line, and building line whether curved or straight. Curve boundaries will be defined by curve data to include the radius, delta angle, total area, length and the long chord by bearing and distance and shall also be defined as a traverse of chords around the curve using bearings and distance. (3) Name of the subdivision or development, as applicable; County identification information; date; north arrow; and graphic scale. (6) Names of owners of record of all adjoining land, all property boundaries, watercourses, roads, easements, utilities (4) Name, registration number, and other such improvements, which cross or form a boundary line seal of the tract being subdivided. project land surveyor and, where applicable, the project engineer responsible for the plan. (7) Exact boundaries of the tract of land being subdivided as noted in the survey art icle of this article. (5) Sufficient surveying data to readily determine and accurately reproduce the location, bearing, and length of applicable road lines, lot lines, easement lines, and tract or development boundaries. Curved lines shall include sufficient data, including radius, delta, arc length, chord bearing, and chord distance. (8) Roads, rights-of-way, percent of grades and road names. Steel or iron rods at least 20 inches long and one half inch in diameter shall be placed at all lot corners and at all other survey points not marked by permanent monuments. Property lines extending to road centerlines shall be marked by an iron stake on all offset with location clearly shown on the plat and selected so corners lie on a line of survey or a prolongati on of such lines. (6) Names of adjoining owners and the location of adjoining boundaries, watercourses, roads, easements, utilities, and other significant features crossing or adjoining the property. (9) Rights-of-way (7) Exact boundaries of the tract, subdivision, or easement; location, widths, and purposes. development area included in the final plan. (10) Lot lines, minimum building setback lines, (8) Location and lot identification of all roads, rights-of-way, and block indicators. private roadway easements, including widths, grades, and road names approved in accordance with chapter 26, article II. (11) Any parks, school sites, or (9) Location, width, and purpose of all other public spaces. easements not otherwise identified under subsection (8). (12) All dimensions shall be to the nearest 1/100of a foot and angles to the nearest 20 seconds. (10) Final layout of the subdivision or land development, as applicable, including: a. lot lines, dimensions, areas, and lot or block identifiers where lots are created; b. building locations and footprints for multifamily, student housing, condominium, townhouse, commercial, institutional, and other applicable land development; c. applicable front, side, and rear setback lines; d. common areas, open space, and othe r principal development areas; e. all required landscape and buffer areas established under sections 32 -237 through 32-253; and f. building, unit, or other development identifiers necessary to clearly describe the approved development. (13) Accurate description of (11) For each private roadway easement shown, the location of all monuments recording reference, responsible maintenance entity, and markers. any associated private sidewalk or drainage facility. (14) Utility easements, showing the widths (12) Location and designation of the following: parks, school sites, open space, common areas, and other land reserved or dedicated for public or common use. a. Water; Chapter 32 | Draft 4.4 | 30 (13) All dimensions shall be shown to the nearest one-hundredth foot and angles to the nearest 20 seconds. b. Gas; (14) Accurate description and location of all monuments and markers. c. Sanitary sewer; (15) Utility easements shall be shown by location, width, and purpose, including water, gas, sanitary sewer, storm drainage, electrical, and other utilities as applicable. d. Storm drainage; and (16) Where individual onsite wastewater disposal is proposed, each lot approved by SCDES shall be identified consistent with the documentation required by subsection (a)(5). Any lot or area not approved shall be clearly identified and, where applicable, restricted by notation from development requiring onsite wastewater disposal. e. Electrical line. (c) Certificates and maintenance notices. (15) Where individual septic waste disposal is proposed, a letter of final subdivision approval from the appropriate division of DHEC identifying each lot for which individual waste disposal is approved. Areas or lots not so approved shall not be included on the final plat unless restricted to prohibit construction of building space thereon by such notation as "reserved exclusively for open space", etc. CERTIFICATE OF MAINTENANCE FOR ROADS (c) Final plat certificates. The road rights-of-way shown on this plat are private and are not owned, maintained, or supervised by Oconee County. Such road rights-of-way were not designed or constructed pursuant to a plan for future acceptance into the Oconee County Public Road System. Road rights-of-way shown on this plat shall not be accepted for maintenance by Oconee County unless subsequently brought into compliance with all applicable Oconee County requirements for road acceptance. Maintenance of the road rights -of-way shall be the responsibility of ______________________________. The following certificates shall appear on the final plat which is submitted to the planning commission by the subdivider: Date: ____________________ Owner/Developer: ______________________________ Certificate of Accuracy (signed when submitted) CERTIFICATE OF MAINTENANCE FOR ROADS - FUTURE ACCEPTANCE PLAN I hereby certify that the plan shown and described hereon is a true and correct survey to the accuracy required by the Oconee County Land Development and Subdivision Regulations and the monuments shown have been placed to the specifications set forth in said regulations. The road rights-of-way shown on this plat are private and are not part of the Oconee County Public Road System as of the date of this plat. The road rights-of-way have been designed and constructed pursuant to an approved plan for possible future acceptance into the Oconee County Public Road System in accordance with chapter 26. Approval of construction information or this plat does not constitute County acceptance. Until formally accepted, if ever, maintenance shall be the responsibility of ______________________________. Any future acceptance shall be evidenced by separate written County action and any required conveyance instrument. ___________, 20___ Date: ____________________ Owner/Developer: ____________ __________________ ___________ ______________ Registration No. Registered Land Surveyor CERTIFICATE OF CONSTRUCTION - ROADS AND DRAINAGE Certificate of Ownership and Dedication (signed when submitted) Chapter 32 | Draft 4.4 | 31 I hereby certify that the roads and drainage facilities serving ______________________________ have been constructed substantially in accordance with the approved preliminary plan, including the construction drawings submitted as part of that plan, except for any deviations approved by Oconee County. It is hereby certified that I am (we are) the owner(s) of the property shown and described hereon and that I (we) hereby dedicate all roads, alleys, walks, parks, and other sites to public or private use as noted. SEAL ______________________________ Project Engineer Date: ____________________ ________ ___________ Date Owner NOTICE OF PRIVATE SIDEWALK MAINTENANCE ___________ Owner THE SIDEWALK LOCATED IN THE PRIVATE ROADWAY EASEMENT SHOWN ON THIS PLAT SHALL BE PRIVATE, NOT OWNED, MAINTAINED, OR OVERSEEN BY OCONEE COUNTY, AND NOT CONSTRUCTED PURSUANT TO ANY PLAN FOR FUTURE ACCEPTANCE BY OCONEE COUNTY. SIDEWALKS IN PRIVATE ROADWAY EAS EMENTS SHOWN ON THIS PLAT SHALL NOT BE ACCEPTED FOR MAINTENANCE BY OCONEE COUNTY AT ANY TIME IN THE FUTURE. MAINTENANCE OF THE SIDEWALK SHALL BE THE RESPONSIBILITY OF ______________________________. Certificate of Maintenance for Private Roads (when applicable) The road right-of-way shown on this plat shall be private drives not owned, maintained, or supervised by Oconee County, and were not constructed pursuant to any plan for future acceptance by Oconee County. Road right -of- ways shown upon the plat shall not be accepted for maintenance by Oconee County at any time in the future unless constructed in accordance with all adopted Oconee County regulations. Maintenance of the right -of-way shall be the responsibility of _________________________________. ___________ ______________ Date Owner/Developer Certificate of Security in Lieu of Completion (when applicable) The developer of this subdivision has filed the appropriate security of lieu of completion prior to recording the final plat. ___________ ___________ Date Planning Director Certificates of Construction (one or both as applicable/signed when submitted) I hereby certify that the roads and drainage system, in ___________ Subdivision as shown on Plat dated ________, prepared by ___________ have been installed substantially in accordance with the Preliminary Plan (Construction Drawings) approved ___________. SEAL ______________________ Registered Engineer or Surveyor I hereby certify that central ( ) water ( ) sewer systems in ___________ Subdivisi on as shown on Plat dated ___________, prepared by ___________, have been installed in accordance with Preliminary Plat (Constructed drawings) approved ___________. SEAL ______________________ Registered Engineer or Surveyor Certificate of Approval (to be signed upon approval) The subdivision plat hereon has been found to comply with the Oconee County Land Deve lopment Regulations and has been approved for recording. I certify that this plat creates a subdivision subject to and approved in accordance with the ordinances of Oconee County. ___________ ___________ Date Planning Director (d) Final plan review procedure. (1) Final approval of the submitted plans shall be granted to the applicant after a review by the planning director. Chapter 32 | Draft 4.4 | 32 (1) The planning director shall review the final plan and required supporting documentation for compliance with the approved preliminary plan, the requirements of this chapter, and any conditions of preliminary approval. (2) Final plan application shall include all of or phases of a subdivision for which preliminary approval was granted, and shall contain documentation that all required improvements have been installed and certified. (2) A final plan application may include all or an approved phase of a major subdivision or land development for which preliminary plan approval was granted. The application shall include all documentation required by this section and shall demonstrate that the improvements required for final approval have been completed and certified, except as otherwise permitted under subsection (3). (3) Final plan applications may be considered, at the discretion of the planning director, if accompanied by the required security in lieu of completion of improvement. (3) Where this chapter permits security in lieu of completion of required improvements, a final plan application may be approved before completion of those improvements only upon submission and acceptance of the required performance guarantee in accordance with section 32-219. Improvements not covered by an approved performance guarantee shall be completed and certified before final approval. (4) Upon a determination that the final plan application is completed; complete and all required supporting documentation has been submitted, the planning director shall render a written approval or rejection. Said denial within 30 business days. The written decision shall identify any conditions or deficiencies forming the basis of the decision. Where review by one or more outside agencies is necessary and additional time is reasonably required to obtain required comments, confirmations, or approvals, the planning director may extend the review period by not more than ten additional business days. The applicant shall be made within 30 working days notified of application submittal. the extension and the reason for it. (5) A subdivider or any party materially affected person aggrieved by the planning director's decision may appeal to the planning commission in writing within ten working days of said decision. The commission shall schedule a hearing, conduct said hearing, and render a decision within 60 days of the date of app eal. The decision of the commission is final. The decision of the commission planning director under this section may be appealed to the circuit court within 30 days after the actual notice of the commission's decision. appeal in accordance with section 32-224. (Ord. No. 2008-20, Art. 13(13.1, 13.2, 13.4, 13.5), 12-16-2008) (e) Addressing. Required road names and assigned addresses shall be approved or obtained under chapter 26, article II, before final subdivision approval. Sec. 32-224. Appeal of decision. Any person (a) A party in interest aggrieved by the planning director's a final staff decision to approve under this article concerning a land-development plan, subdivision plat, or deny an application for minor subdivision record plat approval private-road standard may appeal the decision to the planning commission in writing by filing a written notice of appeal with the planning director within ten working days after actual notice of said the decision. The notice shall identify the decision as outlined in [section 32-223((d)], of this article. appealed and state the grounds for appeal. (Ord. No. 2008-20, Art. 14, 12-16-2008) (b) The planning director shall transmit the decision and support ing record to the planning commission. The planning commission shall hear the appeal and may affirm, reverse, modify, or remand the decision in accordance with the standards of this chapter. The planning commission shall issue a written decision stating th e basis for its action within 60 days after the appeal is filed. Written notice of the decision shall be provided as required by applicable law. (c) An appeal from the planning commission shall be taken to circuit court in accordance with S.C. Code 1976, § 6- 29-1150(D), including its thirty-day filing periods and available pre-litigation mediation procedure. A private-road Chapter 32 | Draft 4.4 | 33 decision does not become a board of zoning appeals matter solely because it concerns a road standard. Zoning decisions remain subject to the applicable chapter 38 appeal process; County-road decisions under chapter 26 remain subject to section 26-8. Sec. 32-225. Violations and penalties. (a) Any violation of these regulations shall be a misdemeanor and, upon conviction, is punishable as pr ovided by law. (b) Unapproved subdivision and subsequent transfer or sale of lots. Any such agreement, negotiated before such plat has been approved by the county planning commission and recorded by the county Register of Deeds shall be considered a violation of this article and punishable as provided herein. The description of metes and bounds in the instrument of transfer or other documents used in the process of selling or transfer shall not exempt the transaction from these penalties. Oconee County may enjoin such transfer or sale or agreement by appropriate action. (b) Unapproved subdivision and subsequent transfer or sale of lots. Any agreement for the sale or transfer of a lot created through a subdivision before the applicable final plat has been ap proved by the planning director and recorded with the Oconee County Register of Deeds shall constitute a violation of this article and shall be punishable as provided herein. The use of a metes-and-bounds description or other instrument of transfer shall not exempt the transaction from the requirements or penalties of this article. Oconee County may seek appropriate legal or equitable relief to prevent or remedy any such transfer, sale, or agreement. (Ord. No. 2008-20, Art. 15, 12-16-2008) (c) When construction begins contrary to section 32-222(a)(4), the planning director may issue written notice identifying the unauthorized work and require cessation pending the necessary preliminary approval and any lawful correction. This subsection does not enlarge the criminal penalty in subsection (a). Sec. 32-226. Legal provisions. The regulations expressed in this document shall be considered as the minimum provisions for the protection of the health, safety, economy, good order, appearance, convenience, and welfare of the general public. (1) Conflict with other laws, ordinances, or regulations. Whenever the requirements made under authority of these regulations impose higher standards than are required in any statute or local ordinance or regulation, provisions of these regulations shall govern. Whenever the provisions of any other statute or local ordinance or regulation impose higher standards than are required by these regulations, the provisions of such statute or local ordinance or regulations shall apply. (2) Severability. Should any section or provision of this article be declared by the courts to be unconstitutional or invalid, such declaration shall not affect the ordinance as a whole, or any other part thereof, other than the part so declared to be unconstitutional or invalid. (3) Repeal of conflicting ordinances. All ordinances or parts of ordinances in conflict with any of the provisions of this article are hereby repealed. (4) Amendments. The planning commission shall hold a public hearing on any proposed a mendment to these regulations; notice of time and place shall be given at least 30 days prior to the hearing date. The notice shall be placed in a newspaper of general circulation. Amendments may be adopted by vote of the county council. (Ord. No. 2008-20, Art. 16(16.1—16.4), 12-16-2008) Chapter 32 | Draft 4.4 | 34 Secs. 32-227—32-414. Reserved. DIVISION 1. PRIVATE ACCESS AND PRIVATE ROADS Sec. 32-227. Applicability of private access standards. (a) Sections 32-227 through 32-235 govern the design, construction, use, and maintenance of private driveways, private drives, and private roads serving subdivision or land development under this article. Compliance with these sections does not constitute County acceptance of a road, create a County maintenance obligation, or transfer a property interest to the County. (b) The approved plan shall identify each access as a private driveway, private drive, private road, or road proposed for future County acceptance. A road proposed for County acceptance shall be reviewed under chapter 26 at the applicable plan stage and is not accepted unless the requirements of section 26 -6 are satisfied. (c) Existing private drives. A private drive lawfully existing and in use, under construction, or approved by the planning department before December 18, 2008, is exempt from the private-drive standards of sections 32-227 through 32-235. If subsequent subdivision or development results in the drive serving 11 or more lots, dwelling units, or other units of development, counted under section 32-228, the drive shall be upgraded to the applicable private-road standards before approval of the additional subdivision or development. (d) Private driveways. Private driveways shall be maintained by the property owners served. No separate roadway - design standard applies to a private driveway under this division, but applicable building and fire codes and the required connection approval shall be met. Sec. 32-228. Access classification and upgrade. (a) A private driveway may serve no more than three lots, dwelling units, or other units of development; a private drive may serve four through ten; and a private road shall serve 11 or more. All existing and proposed lots, parcels, and dwelling units served by the shared access shall be counted. Each apartment, townhouse unit, or other dwelling unit counts as one unit, regardless of ownership or whether it is rented. Each lot or parcel served, including a served remainder parcel, counts as one. The same lot or parcel and a dwelling unit located on it shall not be counted twice; where a lot or parcel contains multiple dwelling units, each dwelling unit shall be counted. Student-housing access shall be counted by dwelling units, not beds. (b) Multifamily and student housing shall be classified under subsection (a) on the same basis as other residential development. The design of access serving group residential facilities, nonresidential development, or other development not measured by dwelling units shall also account for the type and intensity of development, projected traffic, design vehicle, and applicable emergency-access requirements. Such design requirements shall be established as part of the approved Preliminary Plan and shall not reduce a classificat ion required by subsection (a). (c) Where additional subdivision or development causes an existing private driveway or private drive to exceed its applicable limit under subsection (a), the access shall be upgraded to the applicable standard before approva l of the additional subdivision or development, subject to section 32-227(c). Applicable design requirements under subsection (b) shall also be met. (d) A private drive shall be maintained by an individual, association of property owners, or the property o wners served by the private drive. The party or parties responsible for maintenance shall be identified on the applicable plat or other recorded access instrument. (e) A private-road maintenance instrument shall be required for each private road. The instr ument shall identify the property served, the person or entity responsible for maintenance, the allocation of maintenance expenses, and the rights necessary for access, utilities, drainage, emergency services, inspection, repair, and replacement. The instrument shall be recorded before final approval and identified on the final plat, where a final plat is required. Chapter 32 | Draft 4.4 | 35 (f) A private roadway easement shall be provided for each private drive or private road. The easement shall be recorded before final approval and shown on the applicable plan and final plat, where a final plat is required. Sec. 32-229. Private roadway design. (a) Private road geometric design shall comply with the 2021 SCDOT Roadway Design Manual, as adopted by Oconee County. A later edition shall not apply unless adopted by County Council. The project engineer shall design the alignment, grades, curvature, intersection layout, sight distance, cross section, access, and drainage based upon projected traffic and site conditions. (b) Lots shall be laid out with safe access and building sites and, where feasible, oriented to reduce driveway conflicts along collector or arterial roads. Required landscape screening adjoining a more intensive road or use shall be provided under division 3 of this article and chapter 38, as applicable. A screening area shall not impair sight distance, drainage, or access. (c) The approved Preliminary Plan shall show a usable, continuously maintained connection to an existing public road or lawful private access; adequate emergency access, turnaround, and structural capacity under the adopted fire code; and drainage designed under section 32-216. No intersection or cul-de-sac design may be approved without the applicable sight-distance and emergency-access demonstration. An unavoidable deviation from the design manual requires an approved written technical modification under section 32 -235. (d) Private drives shall have a private roadway easement at least 50 feet wide and a driving surface at least 20 feet wide constructed of no less than five inches of compacted crushed stone or gravel base, with vertical clearance of at least 13½ feet, subject to section 32-227(c). A connection to a County or state road shall have the applicable encroachment approval. (e) A private road shall have a private roadway easement at least 50 feet wide. The travel surface, alignment, grades, and other geometric design shall meet the adopted 2021 Roadway Design Manual, including any express County modification adopted by ordinance, and applicable emer gency-access requirements. A road proposed for County acceptance shall also meet chapter 26. (f) The project engineer shall certify the maximum load capacity of each bridge or culvert along a private drive or private road. Bridges and culverts carrying the access across a perennial stream shall have signs at each end displaying the certified weight limit. Sec. 32-230. Construction, signs, utilities and sidewalks. (a) Private access shall be constructed in accordance with approved plans and the c ounty-adopted, titled and dated construction specifications. Materials, placement, compaction, testing, drainage structures, and weather limitations applicable to the approved road class shall be documented by the project engineer. The contractor shall not place a subsequent course before required tests and inspections of the preceding work are completed. (b) Private-road naming and traffic-control signs shall comply with chapter 26, article II. The developer shall install and pay for signs required under section 32-213(e) before final approval; the recorded maintenance instrument shall assign continuing maintenance. A private-road sign shall identify the access as private where required by the approved sign plan. (c) Utilities, drainage structures, swales, and temporary access during construction shall be located and maintained in accordance with the approved plan and sections 32-213(d) and 32-216. The owner shall repair construction damage to an adjoining public road under the applicable chapter 26 encroach ment approval. (d) Private sidewalks. A sidewalk within a private roadway easement is permitted only when the following conditions are met: (1) A financially responsible entity, as determined by the County, shall agree to perform necessary maintenance and repair and accept liability arising from the existence and use of the sidewalk. The recorded maintenance instrument shall identify the responsible entity and assign these obligations. Chapter 32 | Draft 4.4 | 36 (2) The sidewalk shall be designed by the project engineer to meet the m ost recent applicable SCDOT minimum standards and standard drawings and applicable accessibility requirements. The design shall be submitted for County approval, and construction shall comply with the approved design. (3) The sidewalk and its private maintenance responsibility shall be shown on the approved preliminary plan and final plat. The private-sidewalk notice in section 32-223(c) shall appear on the final plat. (4) Necessary maintenance and repair shall be performed expeditiously and consistently wi th the applicable SCDOT minimum standards and standard drawings. (e) County construction standards. The materials, construction, compaction, roadside -drainage, paving-weather, and drainage-structure standards in section 26-3(f), (k), (l), (n), (o), and (p), including express County modifications adopted by ordinance, apply to corresponding private-road work under this article. These references incorporate construction requirements and do not incorporate the County -acceptance criteria or replace the 2021 private-road geometric-design standard in section 32-229. The applicable requirements shall be identified in the approved construction plans. (f) Private-drive construction shall meet section 32-229(d). Required construction inspections and certification for private access are governed by section 32-231. County inspection or technical review does not make a private access County maintained. Sec. 32-231. Inspection, testing and certification. (a) The developer shall give the County Engineer or designee and plan ning director notice and access at the following private-road construction stages, as applicable: (1) completion of clearing and initial grade; (2) completion of rough grading; (3) utility and drainage installation before cover; (4) completion of subgrade; (5) installation and compaction of base course; (6) each pavement application; and (7) final inspection. The approved inspection plan may combine stages when the work remains observable. (b) The project engineer shall arrange and document required third -party or state inspections, tests, and corrections, and submit a signed and sealed construction certification and as -built plan before final approval. The County Engineer or designee may observe work and request the results needed to verify compliance, but observation does not replace the engineer’s certification. An unsatisfactory stage shall be corrected before it is concealed or superseded. A final private-road inspection does not constitute county acceptance. Sec. 32-232. Final plat and maintenance notice. (a) The approved final plat shall show each private roadway easement, its width, access classification, and responsible maintenance party. Where a private road is shown, the plat shall also identify the recording reference to the private-road maintenance instrument. Any private sidewalk and drainage facility shall be shown. The applicable notice in section 32-223(c) shall appear conspicuously on the plat. (b) Approval of an access, final plat, or road inspection does not dedicate the road to the county or obligate the county to maintain it. A request for future acceptance is governed solely by section 26 -6. The developer shall disclose the road and sidewalk maintenance responsibility to purchasers through the recorded instrument and final plat. Sec. 32-233. Additional service and nonresidential access. An application that would cause an existing private driveway or private drive to exceed the limits applicab le to its classification shall demonstrate compliance with section 32-228(c) before approval of the additional subdivision or development. Multifamily and student-housing access shall be counted under section 32-228(a). Group residential, nonresidential, and other access shall also meet the design requirements of section 32-228(b). Chapter 32 | Draft 4.4 | 37 Sec. 32-234. County-road adequacy submittal. For a development consisting of 11 or more lots, dwelling units, or other units of development, the applicant shall submit the traffic impact/road capacity study required by section 26-5(b) with the Preliminary Plan. For another development, a study required by the County Engineer or designee under section 26 -5(b) shall be submitted with the Preliminary Plan or at the stage stated in the written request. The study shall be prepared by a qualified professional and is subject to the technical review and approval required by section 26 -5(b). A separate County request is not a prerequisite to a study already required by that section. Require d County-road improvements and developer responsibility remain governed by section 26-5(b). Sec. 32-235. Technical modification and review. (a) An owner seeking a modification of a private-access technical standard shall submit a written request with a signed engineering analysis demonstrating an equal or greater level of safety and functionality in light of the site conditions, projected traffic, drainage, and emergency access. The County Engineer or designee shall review the engineering information; the planning director shall issue the written decision as part of the land -development record. A modification shall not waive a state requirement, required property interest, recorded maintenance duty, or the approval needed for a public road under chapter 26. (b) A staff decision is appealable to the planning commission under section 32 -224. A request does not go to the board of zoning appeals solely because it concerns a road standard. DIVISION 2. SITE DEVELOPMENT STANDARDS Sec. 32-236. Mass grading and site preparation. (a) Definitions. For purposes of this section, the following words and terms shall have the meanings stated: Active disturbance means land within an approved phase on which clearing, grubbing, excavation, filling, grading, or other land-disturbing activity has commenced and which has not achieved permanent stabilization. Common development plan means a common plan of development or sale consisting of related phases, parcels, or portions of a subdivision or land development that are planned, prop osed, or undertaken as part of one overall development, whether undertaken by one or more owners, developers, or entities or through separate applications or construction schedules. In determining whether development is part of a common development plan, the County may consider plats, plans, applications, permits, common infrastructure, master engineering or stormwater calculations, ownership or control, phasing, and other evidence demonstrating that the development is part of a coordinated project. Mass grading means the clearing, grubbing, excavation, filling, grading, or other substantial alteration of existing land contours over a contiguous area or portions of a common development plan for the purpose of preparing multiple lots, building sites, roads, utilities, drainage facilities, or other components of a subdivision or land development. Pad-ready condition means a lot or building site that has been substantially graded to the planned building elevation or configuration in preparation for construction, excluding grading reasonably necessary solely for roads, utilities, drainage, stormwater facilities, or other common infrastructure. Permanent stabilization means stabilization of a disturbed area by permanent vegetation, pavement, buildings, structures, riprap, gravel, landscaping, or other permanent surface treatment sufficient to prevent erosion and sediment loss. Where vegetative stabilization is used, the vegetation shall satisfy the applicable SCDES final - stabilization standard. (b) A grading plan shall be submitted with the Preliminary Plan for a subdivision or land development involving mass grading. For purposes of this section, related phases and contiguous or commonly controlled portions of a common development plan shall be considered together. Chapter 32 | Draft 4.4 | 38 (c) No more than 20 acres shall be actively disturbed at one time as part of a mass -grading operation. For residential development, no more than 15 lots shall be brought to pad -ready condition at one time. The limits in this subsection apply to the active grading phase and shall not be avoided through separate phases, ownership entities, or sequential applications forming part of the same common development plan. (d) The grading plan shall establish clearly identified phases. Disturbance of a subsequent pha se shall not begin until at least 70 percent of the disturbed area within the preceding active phase has achieved permanent stabilization, except for work necessary to complete approved roads, utilities, drainage, stormwater facilities, or emergency access serving the active phase. The applicant shall provide the evidence of stabilization required by the planning director or other responsible reviewing agency before the next phase begins. (e) The grading plan shall show existing and proposed contours, cut a nd fill areas, drainage, erosion and sediment controls, phase boundaries, limits of disturbance, road and utility corridors, steep slopes, areas to remain undisturbed, proposed pad-ready lots, and the sequence of stabilization. State stormwater and land -disturbance permits remain required where applicable. (f) Grading shall follow existing terrain where practicable and shall avoid unnecessary broad, uninterrupted alteration of the site. Roads and building sites shall be located and graded in a manner consis tent with safe grades, drainage, accessible routes, utility installation, and fire and emergency access. The project engineer shall identify on the plan the basis for a proposed substantial cut or fill that is necessary for approved infrastructure or development. (g) Routine grading associated with construction of an individual dwelling on an approved lot, agricultural or forestry activity where local regulation is prohibited by state law, emergency work, and utility work performed under applicable permits are not mass grading solely by reason of the disturbed acreage associated with that activity. This subsection does not exempt a larger common development plan from the phasing requirements of this section. (h) The applicant shall furnish proof of passed inspections and approvals required by SCDES or a third-party reviewing authority when applicable, together with the evidence of permanent stabilization required by subsection (d). County review under this section does not duplicate state technical permit rev iew or relieve the applicant of state compliance. (i) This section does not establish a separate County tree-preservation, replacement-tree, density-credit, or incentive program. Required landscape and buffer areas shall comply with division 3 of this arti cle. Any grading setback or slope standard not expressly stated in this section remains subject to applicable engineering, stormwater, building, fire, and other adopted requirements. DIVISION 3. LANDSCAPING, SCREENING, AND BUFFER STANDARDS Sec. 32-237. Purpose and applicability. This division establishes minimum landscaping, screening, and buffer standards for major subdivisions and for developments containing 11 or more lots, dwelling units, or other units of development in the unincorporated areas of Oconee County. These standards are intended to reduce conflicts between adjoining uses, preserve existing vegetation when it can meet the required standard, and provide clear requirements for installation and maintenance. (a) Except as provided in this section, this division applies to major subdivisions and to developments containing 11 or more lots, dwelling units, or other units of development, including: (1) Major residential subdivisions where a buffer is required by this division; (2) Planned developments, mixed-use developments, and group developments; (3) Uses or development expressly made subject to this division by chapter 38; and (4) Expansion, redevelopment, or change in use as provided below. Chapter 32 | Draft 4.4 | 39 (b) Routine maintenance or repair that does not increase floor area, parking area, developed area, or intensity of use does not require an existing site to be brought into compliance with this division. (c) When an existing development or developed area is expanded by less than 50 percent cumulativel y within three years, this division applies to the area of expansion and the improvements that serve that area. (d) When an existing development or developed area is expanded by 50 percent or more cumulatively within three years, the site shall comply with this division to the extent related to the proposed work and allowed by applicable vested-right and nonconforming-use provisions. (e) A change in use must comply with any landscaping, screening, or buffer requirement that applies to the new use. (f) An individual detached single-family dwelling is exempt unless another provision of this Code expressly requires a buffer or landscape area. (g) This division does not regulate an agricultural operation or forestry activity where local regulation is prohibited by South Carolina law. Solar energy systems shall comply with applicable state law and any County standard lawfully applicable to the system. Sec. 32-238. Landscape plan. (a) An applicant shall submit a landscape plan with the application for any developme nt that requires landscaping, screening, or a buffer under this division. (b) The plan shall show, as applicable: (1) Property lines, easements, and rights-of-way; (2) Buildings, parking areas, driveways, and other developed areas; (3) Existing vegetation to remain and any vegetation proposed for credit; (4) Required landscape and buffer areas; (5) The type, number, and installation size of proposed plants; (6) Fences, walls, berms, and other screening; (7) Utilities, drainage facilities, and utility easements; (8) Tree and vegetation protection areas; and (9) Any other information needed to show compliance with this division. (c) A licensed design professional shall prepare any portion of a landscape plan that South Carolina law requires that professional to prepare. (d) Required landscape and buffer areas shall be shown on the approved site or development plan. Work shall follow the approved plan unless the Planning Director approves a revision under this division. Sec. 32-239. General landscape requirements. (a) Required landscaping shall be located on private property and outside a public right -of-way unless the agency responsible for the right-of-way gives written approval. (b) Required landscaping shall not block sight distance or interfere with utilitie s, drainage, pedestrian or vehicle access, or fire and emergency access. (c) Plants shall have enough space f

Text truncated. Open the original for the full document.

Source: Oconee County website. First collected Oct 15, 2026.