RecordWell Data

_03102026-567

Town of Fort Mill · York County · meeting of Mar 10, 2026 · Minutes

Open the original document More from Town of Fort Mill

Text

Extracted automatically from the original. Tables and formatting may not survive; the original document is authoritative.

TOWN OF FORT MILL HISTORIC REVIEW BOARD MEETING March 10, 2026 205 N. White St 4:30 p.m. P resent: Chairwoman Megan Brinton, Vice Chairman David Booth, Elizabeth Leventis, Scott Couchenour, Hynek Lettang, Joanne Walker, David Helms, Assistant, Planning Director Penelope Karagounis, Deputy Planning Director Joey Adams- Raczkowski Guests: See attached sign in sheet C hairwoman Megan Brinton called the Historic Review Board meeting to order at 4:32 p.m. on Tuesday, February 10, 2026. AP PROVAL OF MINUTES C hairwoman Megan Brinton asked for a motion to approve Historic Review Board meeting minutes from February 10, 2026, to be made. Commissioner Couchenour made the motion. Commissioner Leventis seconded the motion. The motion to approve the minutes from February 10, 2026, was approved by a vote of 6-0. Vice Chairman David Booth requested a change in the order of the agenda, to have Applicant #1 and Applicant #2 switch to grant additional time to the more complex submission and allow for the second applicant to avoid waiting. NE W BUSINESS 1. Request for Certification of Appropriateness for Visit York County Tourism Kiosk D eputy Planning Director Joey Adams-Raczkowski introduced the first order of business, a request for Certification of Appropriateness for the Visit York County Kiosk, located on Main Street. The board had previously approved specific plans for development of the kiosk and its location. For this request, the applicant was requesting a few changes, regarding the proposed “INFORMATION” signage on the side of the kiosk, the proposed bench, and the proposed brochure rack hung vertically on the kiosk. The existing brochure racks from the previous kiosk are still to be replaced and updated. D eputy Planning Director Adams-Raczkowski presented visuals of the existing kiosk, and proposed updates to the previous submittal. Andy Clinton, CEO of Visit York County, further explained the proposed changes. Mr. Clinton identified their struggles with fulfilling the initial approval, citing difficulties with contractors obtaining correct materials for the bench, installation issues with the existing brochure wall, and issues finding a Wi-Fi partner. Planning Director Penelope Karagounis asked about the removal of the outdated map in the existing brochure rack. Mr. Clinton noted that Visit York County would be working with a local company, Tied and Two, to design new map inserts, and Diversified Signs, out York, to update the brochure racks and existing metalwork. Commissioner Walker noted the possible utility of the bench for kids to sit while parents gather information. Chairwoman Brinton asked about the map, and if it would be updated. Commissioner Walker asked about the selection of brochures that will be available in the brochure rack. Mr. Clinton noted that the brochures will be Visit York County materials. Planning Director Karagounis noted that the specific materials in the brochures and on the digital kiosk will be approved by the Communications and Media Events team with the Town of Fort Mill, and that the decision during this meeting would be solely for the modifications requested. Vice Chairman Booth asked for clarification about the final location for the brochure rack, and about the reasoning for removing the “INFORMATION” lettering on the kiosk. Commissioner Helms proposed moving the lettering to a horizontal format below the existing “Fort Mill” sign, allowing visitors to still know what the kiosk is for, without the possibility of vandalism or additional maintenance on the structure long-term. Vice Chairman Booth added onto this proposal, asking if the applicant could apply a vinyl application that says “Information” above both sides of the brochure rack. The Board discussed potential locations, designs, and materials for a modified “Information” sign. The applicant gave additional information regarding the damage on the rear of the kiosk, and the electrical installation requirements that led to the electronic kiosk being off-center in its position between the brick columns. After discussion, the board agreed to make a motion that reflected their suggested changes. Chairwoman Brinton entertained a motion. Vice Chairman Booth made a motion to approve the application to remove the brochure rack that was proposed and its relocation on the map panel, as well as the removal of the bench, with modification to relocate the information pin lettering in the form of a white, vinyl application on the canopy, filling the majority of the canopy, perpendicular to the streets on each side, with an option for a Town of Fort Mill logo upon Town approval. Commissioner Helms seconded the motion. The motion to approve the application with modifications was approved, with a vote of 7-0. 2. Request for Certification of Appropriateness at The Loom at Fort Mill Deputy Planning Director Joey Adams-Raczkowski presented the request for a Certificate of Appropriateness from the Loom at Fort Mill. He gave context to the previous approvals that the board had made for this project, regarding renovation and demolition of the existing mill, as well the windows, mortar, removal of some ancillary attachments and brickwork. This meeting’s discussion would be regarding hardscaping, landscaping, parking, and the remainder of the historic mill campus. Mr. Adams- Raczkowski also updated the board on Planning Commission’s recent approvals regarding the new construction portion of the project. Deputy Planning Director Joey Adams-Raczkowski introduced Justin Maxwell from DPR, to present new updates and submittals for the project. Mr. Maxwell noted that the plans presented today were also submitted to DPR’s historic consultant, who was working on the formal stage two submittal, and that they planned on submitting building permits and civil plans by the end of the week. Mr. Maxwell presented new deliverables for the streetscape, including a planting strip with low ground covers against the building, noting that it had all been approved by the Planning Commission. Mr. Maxwell noted that the pool amenities were designed to avoid a resort feel, but rather make it feel like the evolution of what it once was, an industrial courtyard. Mr. Maxwell then continued with the presentation, displaying graphics of different areas of the historic renovation. Deputy Planning Director Adams-Raczkowski asked that Mr. Maxwell explain the white color of the exterior of the mill, referring to the Lumion renderings presented. Mr. Maxwell noted that the white color was to retain the focus of the graphics on the exterior elements, and to provide a simple physical reference of the building’s location in relation to the landscaping and hardscaping. Mr. Maxwell moved on to explain the design process behind the internal courtyard. The design plans call for a removal of a section of the original mill’s roof, providing natural light down into this courtyard, where interior units will front and allow the space to function as a kind of corridor between the leasing office and some of the interior amenity spaces. Mr. Maxwell presented more exterior elements, starting with the pedestrian path running alongside the mill building, that follows the historic alignment of Link Street, and creates an exterior space using an existing partial building on site, as well as using concrete and reclaimed materials to follow the terrain lines to create a communal grilling and firepit area. Chairwoman Brinton asked for clarification regarding public access to the pedestrian walking paths. Mr. Maxwell noted that the pathway will be open to the public. Commissioner Walker asked if Watson Street would remain a cut-through road for public use. Mr. Maxwell noted that the street will be widened, realigned, and given outdoor seating amenities. Commissioner Walker asked for additional details regarding parking totals and which parking lots would be resident-only, and which would be open to the public for retail use. Mr. Maxwell confirmed that there would be 126 free, public parking spots on the top floor of the parking deck, 111 parking spots on the bottom floor for residents, and then a total of 473 parking spaces on the site. Mr. Maxwell also described pedestrian safety details on the Watson Street realignment, including a raised crosswalk to connect the two buildings and create a slowing zone for pedestrian safety. Planning Director Penelope Karagounis asked about the crosswalk details on Williamson Street. Mr. Maxwell noted that there would not be a raised crosswalk on Williamson Street. Mr. Maxwell went into further discussion with the board regarding pedestrian views from Williamson, noting that the top level of the parking deck will be at the same grade that both the current mill and the new building are proposed to be, and that the lower level will be at a similar grade to the houses on Academy Street. These houses will be separated by a 23.5’ buffer, evergreen trees, and a six-foot privacy fence. Mr. Maxwell also noted the separation between the private lower-level deck and the public top level, with the residents having access via a separate, private key-carded entrance. Deputy Planning Director Joey Adams-Raczkowski noted that the Planning Commission has approved the plantings, landscaping, plans, and parking deck, and that all the information regarding the approved materials are available online in a similar manner to the agenda packets that the Historic Review Board receives for their meetings. Jerry Gronske noted that the development of the project, especially the newer building, has gotten complicated due to the historic registry of the mill building. Vice Chairman Booth noted that the white color of the building in the Lumion renderings provided made the exterior details difficult to comprehend. The board discussed the color scheme for the new building and the parking deck. Commissioner Leventis noted the adaptive reuse of the materials from the interior of the original mill, bringing it exterior. The Commissioner also asked if there will be signs identifying these exterior materials and their historical significance. Mr. Gronske noted that they had just signed off on a complete signage package, designed by Lunne, which will include external and internal signage. Mr. Maxwell noted other features of the original mill that will be retained in the renovation, including the boiler room, and a large tanker car near the original railroad path. Commissioner Leventis noted the importance of installing plaques to identify parts of the original structure, and how they are being repurposed in the renovated Mill. Commissioner Helms noted the potential elemental effects on the exposed steel beams in the walkway and other portions of the Mill building and asked about plans to protect these materials from rust and other effects. Mr. Gronske noted that there is a resin that will protect the beams, and will have to be reapplied every few years, which is reflected in their capital plan. Commissioner Couchenour asked about public access to the common area. Mr. Maxwell noted that the walkway would be for residents and guests to access amenities. The board discussed the possibilities of Norfolk-Southern contributing to the renovation process on the railroad side of the property, and how the developers are communicating with the railroad company regarding that space. Deputy Planning Director Joey Adams-Raczkowski explained the goals of the applicant’s presentation, and what specific details of the site were up for approval during this meeting. Mr. Adams-Raczkowski also noted that the Board could ask if they could see the wayfinding and signage package once it has been approved, and that its submittal would not delay the rest of the projects construction. Commissioner Leventis discussed the importance and complexity of the project, and the importance to include contingencies in current and future motions, to align with previous motions. Commissioner Couchenour asked about the AC units on the roof, and if the board had previously discussed installing screening walls around them. Mr. Maxwell noted that he believed the intention was that the AC units were inset far enough from the edge, and that SHPO wouldn’t allow screen walls. Commissioner Couchenour also asked about the materials used for the crosswalks on Watson. Mr. Maxwell noted that there would be pavers. Commissioner Booth suggested that the applicant use a herringbone pattern on the crosswalk on Watson. Mr. Maxwell noted that that was already in the plans. Planning Director Penelope Karagounis asked if there would be similar treatment on the other crosswalks on the site. Mr. Maxwell noted that the other crosswalks will be following town standards and will be painted adhesive in a similar way to the Main Street crosswalks. Deputy Planning Director Joey Adams-Raczkowski noted that normally, the Board would have samples of everything, but the applicant is not at that point yet. In this case, the only materials planning staff has to reference as of now are the renderings, and as the material samples are submitted, they will be compared to the renderings. Commissioner Leventis asked if it should be explicitly stated in the motion that the brick is not to be painted, to ensure that the white buildings in the renderings are purely for rendering purposes. Deputy Planning Director Joey Adams-Raczkowski explained that if the board noticed something that needs alteration or further attention in the renderings presented, to say so explicitly in the motion. The board discussed with the applicant, Mr. Maxwell, the previous approval of an unpainted brick exterior and its relevance to the presented renderings that don’t show the true color of the building and outbuildings, that the focal point of this meeting was the exterior hardscaping and landscaping, and that the elevations for the building had already been approved. Planning Director Penelope Karagounis noted that the reason for the white buildings is because the renderings presented today were not a full civil plan, and that due to the scale of the project, the submittals in sections would be focused on their respective topics and thus would lack the full detail of previously approved items, like the exterior color and style of the building. The applicant noted that the lack of color in the building in these renderings was to avoid any confusion about the focus of this specific request for Certification of Appropriateness. Chairwoman Brinton entertained a motion. Commissioner Leventis made a motion to approve landscaping and exterior plans as submitted, with a side note that no brick whatsoever is to be painted, that HRB would like to see the signage and wayfinding package when they are available, and that Fort Mill HRB approval is conditional upon receiving final project approval from both SHPO and NPS. Commissioner Couchenour seconded the motion. The motion to approve the landscaping and exterior plans, with conditions and side notes, was approved by a vote of 7-0. Chairwoman Brinton entertained a motion to adjourn the meeting. Commissioner Couchenour made a motion to adjourn. Commissioner Leventis seconded the motion. The motion of adjournment was approved by a vote of 7-0. The meeting adjourned at 5:52 p.m. Respectfully submitted by Carter Bliss Planner March 20, 2026 Attachment: Case No. 2026-103 The Loom at Fort Mill staff report in its entirety

Source: Town of Fort Mill website. First collected Oct 17, 2026.