RecordWell Data

Board of Architectural Design and Historic Review — Agenda Packet

City of Spartanburg · Spartanburg County · Boards and Commissions · meeting of Jul 9, 2026 · Agenda packets

Open the original document More from City of Spartanburg

Text

Extracted automatically from the original. Tables and formatting may not survive; the original document is authoritative.

Planning Department PO Box 1749 • Spartanburg, SC 29304 • phone: (864) 596-2068 email: planning@cityofspartanburg.org • website: www.cityofspartanburg.org Agenda Board of Architectural Design and Historic Review July 9, 2026 at 5:30 PM Dr. TK Gregg Community Center 650 Howard St. Spartanburg, SC 29303 I. Roll Call II. Freedom of Information Act Compliance – Public notification of the meeting has been published, posted, and mailed in compliance with the Freedom of Information Act and requirements of the City of Spartanburg Zoning Ordinance. III. Rules and Procedures for Meeting Conduct IV. Approval of Agenda V. Disposition of Minutes of May 14, 2026 meeting VI. Old Business: None VII. New Business: a. COA-26-00400020: The Board of Architectural Design and Historic Review has received a request for a Certificate of Appropriateness for a new construction single-family home at 648 S Irwin Ave (Tax Map Sheet: 7-16- 06-012.00) in the Hampton Heights Historic District. Owner: Jesse Joiner & Madison Kucensky / Applicant: Michael Henthorn, Henthorn Architecture VIII. Staff Announcements IX. Adjournment Planning Department PO Box 1749 • Spartanburg, SC 29304 • phone: (864) 596-2068 email: planning@cityofspartanburg.org • website: www.cityofspartanburg.org Meeting Minutes Board of Architectural Design and Historic Review May 14, 2026 at 5:30 PM Dr. TK Gregg Community Center 650 Howard St. Spartanburg, SC 29303 Attendance Board Members Present • Bill Michels, Chair • Brett Avery, Vice Chair (arrived after roll call) • Rod McCants • Julie Gilmore • Dave Williams (arrived after roll call) • Brandon Gaffney • Adib Kapasi • Kenneth Brown Staff Present • Fredalyn Frasier, Planning Director • Nan Zhou, Planner II • Dominick Calace, Planner I Others Present • William Harris, Representative – 506 Hampton Dr • Rachel Lerman, Homeowner – 296 S Spring St • Members of the Public Call to Order Chair Michels called the meeting to order at 5:30 PM and conducted roll call. A quorum was established. The Chair stated that public notice of the meeting had been provided in compliance with the Freedom of Information Act and City of Spartanburg requirements. Meeting procedures were referenced. Approval of Agenda On a motion by Mr. Brown and seconded by Mr. Gaffney, the agenda was approved by a vote of 8–0. Approval of Meeting Minutes (February 12, 2026) Planning Department PO Box 1749 • Spartanburg, SC 29304 • phone: (864) 596-2068 email: planning@cityofspartanburg.org • website: www.cityofspartanburg.org On a motion by Mr. Kapasi and seconded by Mr. Brown, the meeting minutes from February 12, 2026 were approved by a vote of 8–0. Old Business None. New Business Certificate of Appropriateness for Major Works - 296 South Spring Street - Front Yard Fence The Board considered a request to install a new fence along the front property line of a contributing residence in the Hampton Heights Historic District. Staff Presentation • Staff described the property as a contributing residence constructed in 1919 on the west side of South Spring Street. The applicant requested approval of a three-foot-tall fence intended to improve safety and separation from the street while preserving public views of the home. • The Hampton Heights Design Guidelines discourage front-yard fences but do not prohibit them or provide detailed design standards. Staff noted existing examples of front-yard fencing along South Spring Street and elsewhere in the district. • Because the local guidelines provide limited direction, staff also reviewed the City of Rock Hill historic design guidelines, which allow low, open front-yard fences when they do not obstruct the historic building. • Staff recommended approval, finding that a fence limited to three feet in height and designed to remain simple, open, and complementary to the residence could be harmonious with the historic district. Applicant Presentation • The property owner presented historic photographs and examples of low front-yard fences in Hampton Heights and nearby early-twentieth-century neighborhoods. She stated that these examples demonstrated that front-yard fencing was used during the neighborhood’s historic period of development. • The applicant explained that the character of South Spring Street has changed over time due to nearby institutional uses, parking lots, school traffic, and increased vehicle activity. With young children in the household, the proposed fence was intended primarily as a safety barrier rather than for privacy. • The applicant identified several existing low fences on South Spring Street, West Hampton Avenue, and Hydrick Street and stated that the proposal would not create an unfamiliar or visually disruptive element in the streetscape. • The proposed fence would be no more than three feet tall, maintain an open design, and leave the driveway outside the enclosed area. The applicant preferred painted or stained wood because it was more affordable and compatible with the residence and confirmed that vinyl was not proposed. Planning Department PO Box 1749 • Spartanburg, SC 29304 • phone: (864) 596-2068 email: planning@cityofspartanburg.org • website: www.cityofspartanburg.org Board Discussion • Board members discussed the proposed material and height. The applicant confirmed that the fence would be wood rather than vinyl and agreed that three feet was sufficient to provide a physical barrier without creating a privacy fence. • The Board found that the low height and open design would preserve visibility of the historic residence and would be compatible with other examples in the neighborhood. • Members acknowledged that front-yard fences have been evaluated differently in prior cases but found that the applicant had demonstrated both a practical safety need and a design that would remain visually subordinate to the house. Public Comments: No members of the public spoke. The public comment period was closed on a motion by Mr. Gaffney and seconded by Mr. Williams. The public comment period was closed unanimously. Board Action Following deliberation, the Board determined that the project was appropriate and approval would be granted to the Homeowner to proceed with the COA. Motion On a motion by Dr. Avery and seconded by Mr. Brown, the Board approved the Certificate of Appropriateness for a front-yard fence with the following conditions: the fence shall not exceed three feet in height; the fence shall be constructed of wood or iron; and vinyl fencing is prohibited. The motion passed unanimously (8-0). Certificate of Appropriateness for Major Works - 506 Hampton Drive - Front Porch Handrail The Board considered a request to install a handrail at the front porch steps of a contributing residence in the Hampton Heights Historic District. Staff Presentation • Staff described the property as a contributing residence constructed in 1940. The proposal consisted of a black metal handrail positioned along the center of the front steps and constructed of square tubing with simple vertical balusters. • The handrail had already been installed to provide immediate assistance to elderly occupants. It was anchored to the porch floor and sidewalk rather than directly to the historic masonry steps. • The Hampton Heights Design Guidelines do not specifically address new handrails. Staff therefore reviewed the City of Rock Hill historic design guidelines, which allow simple wood or metal handrails when required for safety or access and recommend square balusters and installation methods that avoid damage to historic steps. Planning Department PO Box 1749 • Spartanburg, SC 29304 • phone: (864) 596-2068 email: planning@cityofspartanburg.org • website: www.cityofspartanburg.org • Staff recommended approval, finding that the simple black metal design was visually unobtrusive, compatible with similar handrails in the district, and harmonious with the residence. Final approval remained subject to confirmation of applicable Building Code requirements. Applicant Presentation • The fabricator explained that the residents requested the handrail because one of the occupants was recovering from surgery and needed immediate assistance using the front steps. • The handrail was described as a simple, flat-black square-tube design bolted to the porch framing and sidewalk. It was not connected to the steps and could be removed in the future without significant damage to the historic materials. Public Comments • Marco Lakey, a nearby resident, spoke in support of the request. He stated that the handrail would improve safety and accessibility, was removable, and would help longtime residents remain in their home. No one spoke in opposition. • On a motion by Mr. Kapasi and seconded by Mr. Brown, the public comment period was closed. Board Deliberation and Staff Comments • Board members noted that similar handrails had previously been approved for safety and accessibility and that many historic porches do not provide a usable support along the full length of the steps. • Members supported the simple black metal design because it was tasteful, minimally invasive, and clearly distinguishable as a later safety improvement rather than an original architectural feature. • The Board discussed whether future handrails meeting similar standards could be processed as Minor Work or addressed through a standard policy, recognizing that accessibility requests are likely to become more common. Motion On a motion by Mr. Williams and seconded by Mr. Brown, the Board approved the Certificate of Appropriateness for the handrail as presented. The motion passed unanimously (8-0). Staff Announcements • Staff was coordinating with the Appalachian Council of Governments regarding continuing-education training and will follow up with members on individual requirements. Planning Department PO Box 1749 • Spartanburg, SC 29304 • phone: (864) 596-2068 email: planning@cityofspartanburg.org • website: www.cityofspartanburg.org • Summonses were issued in May for roof openings covered by tarps at 161 South Hampton Drive and 137 West Hampton Avenue. Staff will continue coordinating with Code Enforcement. • The owner of the fire-damaged residence at 234 South Spring Street was working with the Building Department and a contractor on rehabilitation options. • A stop-work order was issued for an unapproved front-yard fence at 710 Maywood Street. Staff will coordinate with Code Enforcement regarding removal or a Board application. • Staff was coordinating with Code Enforcement regarding unapproved vinyl windows at 201 Carlisle Street and a possible Board application. • The Board discussed concerns about deteriorating temporary roof tarps and the need to complete permanent repairs before the coverings fail. • Jenn Cresap was introduced as the Planning Department’s new Senior Administrative Assistant and will assist with Board coordination. Adjournment On a motion by Mr. Kapasi and seconded by Mr. Brown, the meeting was adjourned unanimously. Meeting adjourned at 6:03 P.M. ____________________________ William Michels, Chair Planning Department PO Box 1749 • Spartanburg, SC 29304 • phone: (864) 596-2068 email: planning@cityofspartanburg.org • website: www.cityofspartanburg.org July 2, 2026 TO: The Board of Architectural Design and Historic Review RE: Certificate of Appropriateness for Major Works Address: 648 S Irwin Ave (TMS: 7-16-06-012.00) Historic District: Hampton Heights Historic District Zoning: R-8 SFD (Single Family Residential District) Owner: Jesse Joiner & Madison Kucensky Applicant: Michael Henthorn, Henthorn Architecture Request: The Applicant is seeking approval to construct a new 2,880 square foot single-family home on a vacant property in the Hampton Heights Historic District. ______________________________________________________________________________ Project Description and History The project site is located on an approximately 25,000-square-foot lot on the west side of South Irwin Avenue within the Hampton Heights Historic District. The property is currently vacant and heavily wooded. The applicant requests approval to construct a new 2,880-square-foot single-family residence on the subject property. The proposed one-and-one-half-story Craftsman-style home measures approximately 32 feet in width by 50 feet in length and includes a 14-foot by 45-foot screened porch along the south elevation. The design features two symmetrical dormers projecting from the roofline, one on each side of the structure. The proposed roof ridge height is approximately 29 feet. The residence is proposed to be constructed on a brick foundation. A full-width front porch extends across the primary façade and is supported by three brick piers with fiberglass columns. The porch flooring is proposed to consist of painted tongue-and-groove wood decking. Exterior wall materials include LP SmartSide lap siding, an engineered wood siding product, with cedar shake siding proposed as an accent material. The front elevation incorporates Craftsman-style architectural details, including decorative gable treatment and rake brackets. The roof is proposed to consist of architectural shingles with standing-seam metal roofing accents over the projecting bay on the south elevation. The proposed windows are Marvin aluminum-clad wood casement units with simulated divided lites in a Craftsman-style three-over-one configuration, consistent with the submitted architectural drawings. The primary entrance door is proposed to be a stained mahogany Planning Department PO Box 1749 • Spartanburg, SC 29304 • phone: (864) 596-2068 email: planning@cityofspartanburg.org • website: www.cityofspartanburg.org Craftsman-style door. The screened porch is designed with a wood-framed screen system that is visually compatible with the casement windows used throughout the residence. A split-strip driveway is proposed along the side of the residence, providing access to a concrete parking pad located at the rear of the property. The submitted site plan also identifies the location of a potential future detached garage; however, construction of the garage is not included within the scope of the current application. Analysis Zoning Ordinance and Historic Design Manual Consistency The design guidelines are outlined in the Hampton Heights Design Guidelines for the City of Spartanburg Historic District Preservation Principles and Approaches. The purpose of the guidelines is to provide property owners with guidance for the preservation and protection of historic and architecturally valuable districts and sites in the City. The project is also subject to Section 510 of the City’s Zoning Ordinance, Historic Preservation. This section allows the Board to review applications involving historic structures and districts and issue a Certificate of Appropriateness subject to the standards listed in the Ordinance. Section 510.6 of the City of Spartanburg Zoning Ordinance lists standards for reviewing a Certificate of Appropriateness. Specifically, Section 510.6 (C)(2) states that in reviewing applications for new construction or alteration, the Board shall consider the U.S. Secretary of the Interior’s Standards for Rehabilitation and the five criteria listed in the findings. Section 6.0 New Construction Guidelines 6.2 Recognizing the Prevailing Character of Existing Development • Identify and respect the prevailing character of adjacent historic buildings and surrounding developments. The surrounding homes near the proposed development are predominantly bungalows, including front-gabled and hipped bungalows. The property immediately across the street is a multi-family quadplex. The proposed residence incorporates defining features of the Craftsman Bungalow style, including prominent porch columns, a full-width front porch, decorative gable detailing, and an appropriate roof form. The scale and design of the structure are consistent with other Craftsman-style homes within the district. 6.2.1 Building Setback and Orientation: • The orientation of a new building and its site placement shall appear to be consistent with dominant patterns within the area of influence, if such patterns are apparent. The submitted site plan indicates that the front porch will front South Irwin Avenue and will be located approximately 22 feet from the front property line. This setback is generally consistent with the established front setbacks of adjacent properties along South Irwin Avenue. Planning Department PO Box 1749 • Spartanburg, SC 29304 • phone: (864) 596-2068 email: planning@cityofspartanburg.org • website: www.cityofspartanburg.org 6.2.2 Directional Emphasis: • A new building’s directional emphasis shall be consistent with dominant patterns of directional emphasis within the area of influence, if such patterns are present. The structure will exhibit horizontal directional emphasis and face South Irwin Street, which is consistent with other structures on the street. 6.2.3 Shape: • Roof Pitch: The roof pitch of a new building shall be consistent with those of existing buildings within the area of influence, if dominant patterns are apparent. The proposed structure includes a 10:12 roof pitch on the main roof and 3:12 roof pitches on the dormers. The roof form and pitch are consistent with Craftsman Bungalow-style homes in the district. • Porch Form: The shape and size of a new porch shall be consistent with those of existing historic buildings within the area of influence, if dominant patterns are apparent. The proposed front porch spans the full 32-foot width of the front façade and extends approximately 8.5 feet from the house. The porch is supported by brick piers with painted fiberglass columns above. The size, form, and detailing of the porch are consistent with Craftsman-style front porches found in the Historic District. • Building Elements: The principal elements and shapes used on the front façade of a new building shall be compatible with those of existing buildings in the area of influence, if dominant patterns are apparent. The principal elements and shapes, including the design of window and door openings, are consistent with adjacent structures and other Craftsman style homes in the historic district. 6.2.4: Massing: • The massing of a new building shall be consistent with dominant massing patterns of existing buildings in the area of influence, if such patterns are apparent. The proposed structure is 1.5 stories. The ridge height of the proposed building is approximately 29 feet. The design also includes symmetrical dormers on each side of the structure. Adjacent homes on the street range in height from 1 to 2 stories. The scale and form of the structure are appropriate for the surrounding neighborhood. 6.2.5: Proportion: • The proportions of a new building shall be consistent with dominant patterns of existing buildings in the area of influence, if such patterns are apparent. The proposed structure’s proportions, including the height and width of windows and doors, are consistent with adjacent structures and other bungalows throughout the Historic District. Planning Department PO Box 1749 • Spartanburg, SC 29304 • phone: (864) 596-2068 email: planning@cityofspartanburg.org • website: www.cityofspartanburg.org 6.2.6 Rhythm: • New construction in a historic area shall respect and not disrupt existing rhythmic patterns in the area of influence, if such patterns are present. The proposed structure respects the established rhythm of development along South Irwin Avenue. This includes the massing, setbacks, and design of porches. The project is located on a vacant lot and will not disrupt the existing rhythm of historic structures along the street. 6.2.7 Scale/Height: • New construction in historic areas shall be consistent with dominant patterns of scale with the area of influence, if such patterns are present. The proposed structure is a one-and-a-half-story Craftsman-style home with an approximate roof ridge height of 29 feet. The height and scale are compatible with surrounding residential structures, which range from one to two stories. Findings Certificate of Appropriateness, Section 510.6 (C) a. The character and appropriateness of the design The proposed structure is appropriate in character and design for the Hampon Heights Historic District. The home is designed in a Craftsman style and incorporates architectural elements commonly found within the district, including a full-width front porch, prominent porch columns, a brick foundation, decorative gable detailing, rake brackets, dormers, and Craftsman- style window patterns. b. The scale of the buildings The proposed home is one-and-a-half stories with an approximate roof ridge height of 29 feet. The overall height, massing, and shape are compatible with the surrounding residential context, where homes generally range from one to two stories. c. The texture and materials The proposed materials include a brick foundation, LP SmartSide lap siding (6-inch exposure, smooth finish), cedar wood shake siding accents, architectural shingles, metal roof accents, aluminum-clad windows, a stained mahogany Craftsman-style front door, and painted wood tongue-and-groove porch decking. These materials provide a combination of traditional residential textures and compatible modern building materials. The brick foundation, wood porch decking, cedar shake siding, and aluminum-clad windows support the historic residential character of the design. The use of engineered wood lap siding is generally compatible with new construction when installed with an appropriate exposure, smooth finish, and traditional corner detailing, all of which are present in the design. Planning Department PO Box 1749 • Spartanburg, SC 29304 • phone: (864) 596-2068 email: planning@cityofspartanburg.org • website: www.cityofspartanburg.org d. The relationship of such elements to similar features of structures in the immediate surroundings – The proposed building elements are similar to features found on surrounding historic residential structures. The front-facing orientation, full-width porch, brick foundation, Craftsman-style columns, roof form, dormers, window pattern, and decorative detailing are consistent with features found on nearby bungalows and Craftsman-style homes in the district. e. If the property is in a Historic District, the extent to which the alteration or construction would be harmonious with the Historic District – The proposed new construction would be harmonious with the Hampton Heights Historic District. The project is located on a vacant lot and would introduce a new single-family residence that respects the residential character of the area. The proposed setback, orientation, scale, porch form, roof shape, window pattern, and exterior detailing are compatible with the surrounding historic context. Based on the submitted plans and staff’s review of the applicable design guidelines, the proposed construction is consistent with the character of the district and would not adversely affect the historic integrity of the surrounding area. Staff Comments Staff worked with the applicant throughout the design process and provided feedback regarding the proposed architectural design, building materials, and exterior detailing. Staff Recommendation - Approval Based on the findings above, staff recommend approval of the proposed structure. Prepared by: Dominick Calace Planner I City of Spartanburg Planning Department Reviewed by: Fredalyn M. Frasier Planning Director Attachments: Conditions of Approval Site Map & Zoning Map Site Photos Application and Materials Planning Department PO Box 1749 • Spartanburg, SC 29304 • phone: (864) 596-2068 email: planning@cityofspartanburg.org • website: www.cityofspartanburg.org CONDITIONS OF APPROVAL FOR THE PROJECT ON PROPERTY AT: 648 S Irwin Ave (TMS: 7-16-06-012.00) – Hampton Heights Historic District Owner: Jesse Joiner & Madison Kucensky Applicant: Michael Henthorn, Henthorn Architecture 1. If one or more of the following conditions is not met with respect to all its terms, then this approval may be revoked. 2. All plans for future construction which are not covered by this review shall be submitted to the City Planning Department for review and approval. 3. Major modifications to plans or exceptions to completion may be granted only by the City authority which approved the project. 4. This permit shall be exercised within six months of the date of final approval, or it shall become null and void. Extensions may be granted with the permission of the Board. 5. A building permit shall be obtained from the Building Department prior to commencement of work. 6. The development of the site shall be in substantial accordance with the approved plans submitted and on file in the Spartanburg City Planning Department. Major modifications to plans or exceptions to completion may be granted only by the City authority which approved the project. Planning Department PO Box 1749 • Spartanburg, SC 29304 • phone: (864) 596-2068 email: planning@cityofspartanburg.org • website: www.cityofspartanburg.org Subject Property – 648 S Irwin Ave Planning Department PO Box 1749 • Spartanburg, SC 29304 • phone: (864) 596-2068 email: planning@cityofspartanburg.org • website: www.cityofspartanburg.org Adjacent Property – 644 S Irwin Ave Planning Department PO Box 1749 • Spartanburg, SC 29304 • phone: (864) 596-2068 email: planning@cityofspartanburg.org • website: www.cityofspartanburg.org Properties Across the Street – 641 S Irwin Ave & 643 S Irwin Ave Kucensky-Joiner ResidenceHenthornSpartanburg, South Carolina648 S. Irwin Ave A1 COVER SHEETA2 LOCATION AND SURVEYA3 SITE PLANA4 RENDERINGA5 FRONT LEFT VIEWA6 FRONT RIGHT VIEWA7 REAR LEFT VIEWA8 REAR RIGHT VIEWA9 FIRST FLOOR PLANA10 2ND FLOOR PLANA11 FRONT ELEVATIONA12 RIGHT ELEVATIONA13 REAR ELEVATIONA14 LEFT ELEVATIONJOINER-KUCENSKY RESIDENCE648 S. IRWIN AVESPARTANBURG, SOUTH CAROLINASCHEMATIC DESIGNDRAWING INDEX Kucensky-Joiner ResidenceHenthornSpartanburg, South Carolina648 S. Irwin Ave VICINITY MAPSURVEY Kucensky-Joiner ResidenceHenthornSpartanburg, South Carolina648 S. Irwin AveSITE SITE VIEW DOWN HILLVIEW UP HILL Kucensky-Joiner ResidenceHenthornSpartanburg, South Carolina648 S. Irwin AveADJACENT HOUSE STREET NEIGHBORS NEIGHBORHOOD PRECEDENT Kucensky-Joiner ResidenceHenthornSpartanburg, South Carolina648 S. Irwin Ave SITE PLAN Kucensky-Joiner ResidenceHenthornSpartanburg, South Carolina648 S. Irwin Ave VIEW FROM STREET Kucensky-Joiner ResidenceHenthornSpartanburg, South Carolina648 S. Irwin Ave VIEW FROM FRONT LEFT Kucensky-Joiner ResidenceHenthornSpartanburg, South Carolina648 S. Irwin Ave VIEW FROM FRONT RIGHT Kucensky-Joiner ResidenceHenthornSpartanburg, South Carolina648 S. Irwin Ave VIEW FROM REAR LEFT Kucensky-Joiner ResidenceHenthornSpartanburg, South Carolina648 S. Irwin Ave VIEW FROM REAR RIGHT W2W1W2AW3W3 W4 W5 W6W7 W8W8A D1 D2 D3 D4 D5 Kucensky-Joiner ResidenceHenthornSpartanburg, South Carolina648 S. Irwin Ave FIRST FLOOR PLAN W9W9AW9B W10 W11W11AW11B W12 W13 W14 D6BD6AD6W15W16 Kucensky-Joiner ResidenceHenthornSpartanburg, South Carolina648 S. Irwin Ave 2ND FLOOR PLAN Kucensky-Joiner ResidenceHenthornSpartanburg, South Carolina648 S. Irwin Ave FRONT ELEVATION Kucensky-Joiner ResidenceHenthornSpartanburg, South Carolina648 S. Irwin Ave LEFT ELEVATION Kucensky-Joiner ResidenceHenthornSpartanburg, South Carolina648 S. Irwin Ave REAR ELEVATION Kucensky-Joiner ResidenceHenthornSpartanburg, South Carolina648 S. Irwin Ave LEFT ELEVATION Joiner-Kucesnsky Residence June 4, 2026 Exterior Materials & Colors List Foundation Brick Base: Mfg: Triangle Brick. Mary oaks NC Pattern: Oxford Modular. # 1380. Natural mortar Alt. : Mfg: Statesville Brick Co. Statesville NC Pattern: Old Plantation Red Modular Lap Siding: Mfg.: LP Smartside by Louisiana Pacific Corporation. 38 Series Smooth Finish Lap, primed for paint, 7.84” width x .354 “ thick with 6” exposure. Exterior corners to be woven. Painted finish to be field applied. Color: TBD Shake Siding: Mfg.: Prefabricated red cedar shingle panels by Cedar Valley Manufacturing, Hollister California. 7 1/8” even butt line, open keyway standard thickness with 90 deg. flush-mounting corner units. Color: TBD Exterior Trim: Mfg: LP Smartside. By Louisiana Pacific Corporation. 440 or 540 Series smooth finish trim, primed for paint. Size and series per drawings. Color: TBD Shingle Roofing: Mfg.: Certainteed Landmark Pro Series, 30 Yr Architectural shingles Color: Weathered wood Metal Roofing: Mfg: JD Metals of Piney Flats Tn. or equal. 26 ga. Steel Nail Strip, 12” width panels, 1½” high seams with flat panel profile. PVDF finish Color: TBD Windows: Mfg: Marvin Windows and Doors of Warroad Minnesota. Ultimate Series Casement and Picture Windows. Aluminum Clad exterior/ wood interior. Glazing: 11/16” clear, low E2 w/ Argon insulated glass units. 7/8” Simulated Divided Lights with spacer bar. Pattern per drawings Color:TBD Exterior Doors: Front door: Mfg: Simpson Door Company of McCleary, WA or equal. Craftsman series door and Side lights. Door: 3’ w x 8’high, model # 36863. Sidelight model 6171. Clear glass inserts in door and sidelights. Stained Mahogany Color: TBD Rear Door: Mfg. TBD. 3080 Textured fiberglass with insulated glass insert. Color: TBD Other doors: Mfg: Marvin Ultimate series inswing French or bi-fold doors. Aluminum clad exterior, wood interior. Size and series per drawings. 7/8” simulated divided lights per drawings. Color: To match windows Porch Columns: Mfg: HB&G of Troy Alabama. Permacast load bearing fiberglass columns, painted. Front porch columns: Tapered Craftsman 16” x 12” x 6’. Cut to length. Capital to be field applied 5/4” x 3 ½” trim material with 1 ¾” PVC bed molding. Base to be field applied 5/4” x 7 ¼” trim material with ¾” PVC cove molding. Side and rear porch columns: Square, non- tapered 10” x 9’. Capital to be field applied 5/4” x 3 ½” Trim material with 1 ¾” PVC bed molding. Base to be field applied 5/4” x 7 ¼” trim material with ¾” PVC cove molding. Color: TBD Porch Decking: Mfg: YellaWood (Great Southern Wood Preserving, Incorporated) of Abbeville, Alabama. Or equal. 5/4” x 3 ½” Tongue and groove Kiln dried after treatment, pressure treated southern yellow pine. Painted. Color: TBD Porch ceiling: Mfg: TBD. 1x6 clear southern pine bead board. 1 3/4” pvc bed molding. painted Color: TBD Porch steps: Mfg. TBD. Structure: KDAT Pressure treated yellow pine. Primed and painted Treads: 5/4 x 6 Kiln dried after treatment, pressure treated Southern pine Decking. Finished to match porch decking. Railings: Mfg: TBD. Western red cedar or Douglas fir, to be primed and painted. (Note: railings not required on front porch as height is less than 30” (IRC R312.11) Color: TBD Gutters Mfg.: TBD 5” .027 ga Aluminum K-Style seamless gutters and downspouts. Color: To match trim color SHAKE SIDING ALTERNATE SHAKE SIDING Landmark® Series Designer Roofing Series Landmark, shown in Weathered Wood SHINGLE ROOFING Max Def Colonial Slate Max Def Driftwood Max Def Heather Blend Max Def Coastal Blue Max Def Red Oak Max Def Evergreen Max Def Shenandoah Max Def Weathered Wood MAX DEF COLORS Look deeper. With Max Def, a new dimension is added to shingles with a richer mixture of surface granules. You get a brighter, more vibrant, more dramatic appearance and depth of color. And the natural beauty of your roof shines through. Max Def Espresso 13 NEW NEW 14 LANDMARK SERIES SPECIFICATIONS • Two-piece laminated fiberglass-based construction • Classic shades and dimensional appearance of natural wood or slate • colors have a Solar Reflectance Index greater than 20 SRI. For U.S. building code compliance, see product specification sheets. CertainTeed products are tested to ensure the highest quality and comply with the following industry standards: Fire Resistance: • UL Class A • UL certified to meet ASTM D3018 Type 1 Wind Resistance: • UL certified to meet ASTM D3018 Type 1 • ASTM D3161 Class F Tear Resistance: • UL certified to meet ASTM D3462 • CSA standard A123.5 Wind Driven Rain Resistance: • Miami-Dade Product Control Acceptance: Please reference www.certainteed.com to determine approved products by manufacturing location. Impact Resistance: • Certified to meet UL 2218 Class 3 (Landmark, Landmark PRO) • Certified to meet UL 2218 Class 4 (Landmark Premium) Quality Standards: • ICC-ES-ESR-1389 & ESR-3537 WARRANTY • Lifetime limited transferable warranty against manufacturing defects on residential applications • 50-year limited transferable warranty against manufacturing defects on group-owned or commercial applications (Landmark PRO and Landmark Premium) • 40-year limited transferable warranty against manufacturing defects on group-owned or commercial applications (Landmark) • algae-resistance warranty (25-year – Landmark, 30-year – Landmark PRO, and Landmark Premium) • 10-year SureStart™ protection • 15-year 110 mph wind-resistance warranty • Wind warranty upgrade to 160 mph available. CertainTeed starter and CertainTeed hip and ridge required See actual warranty for specific details and limitations. LANDMARK ® • Certified to meet UL 2218 Class 3 Impact Resistance • Dual-layer durability • Industry-best lifetime limited warranty • 25-year algae-resistance warranty • colors have a Solar Reflectance Index greater than 20 SRI. LANDMARK® PRO • Certified to meet UL 2218 Class 3 Impact Resistance • Dual-layer, high performance • Max Def color palette • Industry-best lifetime limited warranty • 30-year algae-resistance warranty LANDMARK® PREMIUM • Certified to meet UL 2218 Class 4 Impact Resistance • Dual-layer, high performance • Max Def color palette • Industry-best lifetime limited warranty • 30-year algae-resistance warranty Strength with Style 19 3800 Hwy 11E Limestone, TN 37681 Width 12" or 16" Coverage 26 & 24 Gauge Available in Weather XL™ and Crinkle™ Finishes Limited Lifetime Paint Warranty System 1" or 1.5" Rib Height STANDING SEAM jdmetals.net 423.257.8310 Contact Us: Concealed Fasteners Residential & Commercial Use Available in Galvalume Applies Over Solid Substrates with Use of Underlayment Backer Rod Recommended on All Standing Seam Panels Suggested Minimum Roof Slope 3:12 PANEL COVERAGE (NAIL FIN) Panel Coverage 1" Rib Height 12" Panels: 1-1/2" Rib Height 12" Panels: 1" Rib Height 16" Panels: 1-1/2" Rib Height 16" Panels: 12" 12" 15-1/2" 14-1/2" Also Available In Clip System METAL ROOFING SDL PATTTERN, TYPICAL. SEE DRAINGS FRONT DOOR 1 QUALITY . STRENGTH. ELEGANCE. 1110 Cast®Plus Columns Recessed Panel Square Column with Poly Tuscan Cap and Base. Neck mould is adjustable and can be applied anywhere on column. Recessed Panel columns must be primed with a quality bonding primer before finishing with a quality top coat of paint. RECESSED PANEL INSIDE DIMENSION Inside dimension may vary up to 1/4". 8" 10" 12" 14" 55/8" 71/2" 91/2" 11" Column Size Inside Inside Dimension See page 16 for Decorative Capital dimensions. *Recessed Panel columns are not able to be split. SQUARE RECESSED PANEL PERMACAST®PLUS COLUMN DIMENSIONS (IN INCHES)* Column Size A C D E F G J K L N O R S Recess Depth Lengths Available (ft.) 8" 10" 12" 14" 8" 10" 12" 14" 111/8" 127/8" 165/8" 193/8" 11/8" 23/8" 213 / 16" 35/8" 13/4" 25/1 6" 23/8" 27/8" 5/8" 3/4" 7/8" 11/1 6" 1" 1" 1" 11/8" 8,9,10 8,9,10 8,9,10,12,14 8,10,14 13/8" 13/4" 23/16" 21/2" 13/8" 13/4" 1611/16" 1911/16" 1015/16" 125/8" 1611/16" 191/16" 12" 141/2" 18" 211/2" 7" 81/2" 101/2" 121/4" 41/4" 57/1 6" 6 1/ 16" 79/1 6" 11/2" 11/2" 21/4" 25/8" 1/2" 1/2" 9/1 6" 11 / 16" 10 ® L R — — — — — — A C F E D K J G — — Neck mould is adjustable and can be applied anywhere on column. Column Size Top Bottom Inside Dimension 10" x 51/2" 101/4" x 71/2" 10" x 8" 12" x 8" 12" x 10" 14" x 12" 16" x 9" 16" x 9" 41/2" 7" 7" 61/2" 9" 11" 8" 11" 9" 9" 81/2" 11" 11" 13" 15" 15" CRAFTSMAN INSIDE DIMENSION Inside dimension may vary up to 1/4". Splitting a column will decrease inside dimension 1/8". *Has 1/3" to 2/3" taper. NOTE: Neck mould is not applied. Flashing and Installation Kit is not available for Craftsman Columns with Poly Tuscan cap and base sets. • Split columns are not load bearing. CRAFTSMAN COLUMN DIMENSIONS (IN INCHES) A B C D E F G J K L R Length 10" x 51/2 101/4" x 71/2" 10" x 8" 12" x 8" 12" x 10" 14" x 12"* 16" x 9" 16" x 12" 10" 101/4" 91/2" 12" 12" 14" 16" 151/4" 51/2" 71/2" 71/2" 77/8" 10" 12" 9" 111/2" 135/8" 131/2" 123/4" 165/8" 169/16" 183/4" 191/16" 211/2" 21/2" 23/8" 23/8" 21/2" 21/2" 33/8" 21/2" 37/8" 21/2" 21/4" 21/8" 21/2" 21/2" 3" 21/2" 35/16" 1" 3/4" 3/4" 11/16" 11/16" 1" 11/16" 13/16" 13/8" 1" 1" 11/4" 1" 15/8" 13/8" 13/8" 95/8" 101/4" 101/4" 1 0 15/16" 123/4" 171/8" 131/4" 151/4" 57/8" 53/8" 51/4" 61/16" 61/16" 73/8" 61/16" 83/8" 13/8" 1" 13/8" 11/2" 13/8" 2" 13/8" 2" 1" 1" 1" 1" 1" 1" 1" 1" 66" 7' 66" 5', 6' 6', 10' 9' 6', 8' 58" 6', 8' 11 1X4 & 1X7 FIELD APPLIED CAPITAL AND BASE FRONT PORCH COLUMNS 98 Column Size Lengths Available (ft.)A C D E F G J K L N O R 6" 8" 10" 12" 14" 16" 91/8" 111/8" 127/8" 165/8" 193/8" 221/8" 17/1 6" 17/8" 23/8" 213 / 16" 35/8" 33/8" 1" 1" 1" 1" 11/8" 11/8" 6,8,9,10 6,8,9,10,12 8,10,12,14 11/4" 11/4" 11/4" 17/8" 21/1 6" 23/8" 13/8" 11/2" 13/4" 23/1 6" 21/2" 23/4" 91/8" 101 5/1 6" 125/8" 165/8" 191/1 6" 211/2" 15/1 6" 13/4" 23/1 6" 23/8" 27/8" 33/8" N/A 4" 33/4" N/A N/A N/A N/A 31/8" 41/8" N/A N/A N/A 35/1 6" 41/4" 57/1 6" 61/1 6" 79/1 6" 87/1 6" 9/1 6" 5/8" 3/4" 7/8" 11/1 6" 13/1 6" 6" 8" 10" 12" 14" 16" 51" 6,8,9,10,12 14,16 8,10,12,14 16,18,20 8,9,10,12,14,16,18 Fluted Square. *There may be a variance of up to 1/4" in all dimensions. • Split columns are not load bearing. • See page 16 for Decorative Capital dimensions. SQUARE PERMACAST®PLUS COLUMN DIMENSIONS (IN INCHES)* - Made of Structural Fiberglass - Will not Check, Twist, Split or Rot - Load Bearing - Can be Stained using a Solid Body Acrylic Stain or Painted - Weather and Insect Proof - Low Maintenance - Easy Installation - Limited Lifetime Warranty* RoughSawn® Cast®Plus 24" Brace Without the issues: • Checking, splitting, twisting... *See Warranty ** Products shown have been stained for demonstration purposes. RoughSawn® columns are shipped unfinished. The beauty of wood A A Neck mould is adjustable and can be applied anywhere on column. Cast®Plus ColumnsSquare To make installation even easier our 6"-12" round and square poly Tuscan Cap and Base Sets with flashing cap come with the patented (Patent 9689674) Plumb-Fit® installation system included. Plumb-Fit® The design and versatility of an HB&G square column has enhanced its popularity with today's architects. The HB&G Square PermaCast®Plus column lineup includes plain, recessed panel, fluted, and Craftsman styles. An unlimited combination of styles can be achieved by various uses of the neck moulding, and caps and bases. Additionally, the plain square column is not tapered and can be cut to any height without affecting the fit of the caps and bases. Versatility of Square Columns SQUARE PERMACAST®PLUS INSIDE DIMENSIONS Inside dimensions may vary up to 1/4". Splitting a column will decrease inside dimension 1/8". *Inside is Round 6" 8" 10" 12" 14" 16" 53/8" 65/8" 9" 11" 13" 15" Column Size Inside Inside Dimension PermaCast®Plus Square Column shown fluted with Poly Tuscan Cap and Base. PermaCast®Plus Square Column shown plain with Poly Tuscan Cap and Base. Size 10" x 6" 12" x 8" A 93/4" 113/4" B 53/4" 73/4" C 121/2" 141/2" D 87/8" 103/4" E 31/2" 31/2" F 66" 66" CRAFTSMAN ROUGHSAWN® "C" is cap/base (2 sizes available / sold separately) Trim sizes are available and can be used as both cap and base based on preference. SQUARE ROUGHSAWN® Size 8" 10" 12" A 73/4" 93/4" 113/4" B 91/4" 111/4" 131/4" C 31/2" or 51/2" 31/2" or 51/2" 31/2" or 51/2" D 8',9',10' 8',9',10',12' 8',9',10',12' 8 SHAFT ONLY. 1X4 & 1X7 FIELD APPLIED CAPITAL AND BASE. SIDE & REAR PORCH COLUMNS

Source: City of Spartanburg website. First collected Oct 17, 2026.