presentation
Fairfax County · Fairfax County · meeting of Nov 24, 2026 · Other
Open the original document More from Fairfax County
Text
Extracted automatically from the original. Tables and formatting may not survive; the original document is authoritative.
Building Height
Zoning Ordinance Amendment
Land Use Policy Committee
November 24, 2026
Jenn Tran
Zoning Administration Division
2
Project timeline
Board matter regarding
infill lots and height,
Staff research and
concept development
2025
Board and PC committee
meetings: concepts
March 2026
Industry outreach meetings
Spring/Summer 2026
Board and PC committee
meetings: draft text
November 2026
Additional industry and
community outreach
Winter 2026/2027
Authorization and public
hearings
Spring 2027
Revising the building height definition
Responding to changing home trends
• New larger homes feature
complex rooflines and more bulk
on 3rd and 4th floors.
• Many new homes are reaching
overall heights of 35-45 feet.
• Amendment aims to revise and
clarify how we measure building
height to reduce excess height and
bulk above the 35-foot maximum
and standardize measurement across
home designs.
3
Fairfax County Home, built 1951 source:
Google Maps
Fairfax County Home, built 2010
source: Google Maps
Fig. 3: Height Measurement by Roof Type for Principal Buildings
How is building height measured?
35-foot maximum height for single-
family dwellings
(R-E and R-C allow 40-foot height with a 50-foot setback)
Building height is distance from grade
(ground level) to:
– Flat Roof
• Highest point of the roof.
– Pitched Roofs
• Midpoint between the ridge and eave of
the roof with highest ridge.
• Midpoint is used instead of peak height
because the peak generally has less
impact on bulk.
4
5
Challenges
• 3- and 4- story homes with usable loft space often
means more bulk on upper floors.
• Multiple rooflines – creative workarounds.
• Because only the highest ridge is used to
measure building height, some designs
incorporate bulk over the 35-foot maximum.
• Current building height measurement does not
always capture bulk on upper floors.
The blue roof is only 2
inches higher than the red
roof that includes more bulk
Fairfax County Home, built 2023 Source: Google Maps
Proposed changes: Building Height definition
Measuring at the highest midpoint
When multiple pitched roofs are
present, building height would be
measured at the highest midpoint
(shown in dashed red).
6
The roofline in red has a higher overall midpoint,
and includes more bulk
43’
40’ 35’
44’
Proposed changes: Building Height definition
Large dormers add bulk
7
Dormer roof standard: When
dormers occupy 50% or more of
roof width, they are considered an
additional roofline to measure
building height.
Proposed Figure 9102.3: Height Measurement for Dormer Roofs 50% of Roof Width and Larger
Small dormers under 50%
width would not impact
the height measurement
Proposed changes: New graphics
8
Proposed Figure 9102.2: Height Measurement for Multiple RooflinesProposed Revised Figure 9102.1: Height Measurement by Roof Type for Principal Buildings
Current vs Proposed definition comparison
9
Fairfax County Home, built 2023 Source: Google Maps
This home would need to be 2’6” lower under the proposed definition of building height.
10
Current vs Proposed definition comparison
This home would have no change in building height under the proposed measurement
methodology. The impact of the proposed amendment on height depends on home design.
Staff Contact:
Jenn Tran - jennifer.tran@fairfaxcounty.gov
11
Amendment Webpage
https://www.fairfaxcounty.gov/planning-development/zoning-ordinance/residential-building-height
Source: Fairfax County website. First collected Nov 15, 2026.