RecordWell Data

white paper

Fairfax County · Fairfax County · meeting of Nov 24, 2026 · Other

Open the original document More from Fairfax County

Text

Extracted automatically from the original. Tables and formatting may not survive; the original document is authoritative.

Department of Planning and Development Zoning Administration Division 12055 Government Center Parkway, Suite 807 Fairfax, Virginia 22035-5507 Phone 703-324-1314 Fax 703-803-6372 www.fairfaxcounty.gov/planning-development C o u n t y o f F a i r f a x , V i r g i n i a To protect and enrich the quality of life for the people, neighborhoods and diverse communities of Fairfax County November 17, 2026 BUILDING HEIGHT ZONING ORDINANCE AMENDMENT Updated Staff Summary and Draft Text BACKGROUND This staff summary follows the previous summary issued March 10, 2026, and has been updated to reflect findings from industry outreach and corresponding proposed text. For additional background and existing standards, please refer to the previous staff summary.1 The Zoning Ordinance defines building height in relation to roof type, which affects the design of buildings, especially residential homes. The current definition dates to the 1959 Zoning Ordinance, and has not been updated despite new construction techniques and the evolution of home trends towards larger 3- and 4-story homes with complex roof designs and considerable bulk on upper floors. Staff recommends revising the definition of building height in response to residential building trends. This amendment is also a first step towards addressing the concerns regarding residential height, bulk, and setback ratio identified in the November 18, 2025 Board Matter,2 which will be covered more broadly in a future amendment.3 1 Residential Building Height White Paper, Issued March 10, 2026: https://www.fairfaxcounty.gov/boardofsupervisors/sites/boardofsupervisors/files/Assets/Documents/PDF/WHITE - PAPER_Residential-Building-Height-ZOA_LUPC.pdf 2 Review of Height-Looming Standards Board Matter: https://www.fairfaxcounty.gov/boardofsupervisors/sites/boardofsupervisors/files/Assets/meeting - materials/2025/November%2018%20BOS%20Summary.pdf 3 Zoning Ordinance Work Program, Priority 2, Topic #6: https://www.fairfaxcounty.gov/planning- development/sites/planning- development/files/Assets/Documents/zoning%20ordinance/amendmentworkprogram/FY2027 -28-P2-adopted.pdf Fig. 1 and Fig. 2: Example images of homes in Fairfax County. Source: Google Maps Building Height Zoning Ordinance Amendment November 17, 2026 Page 2 CURRENT COUNTY BUILDING HEIGHT STANDARDS Building height is measured in accordance with the definition in the Zoning Ordinance, as well as Technical Bulletin 19-01, issued January 29, 2019.4 The Zoning Ordinance definition reads: Height, Building For principal buildings, the vertical distance to the highest point of the roof for flat roofs; to the deck line of mansard roofs; and to the average height between eaves and the ridge for gable, hip, and gambrel roofs measured from the curb level if the building is not more than ten feet from the front lot line, or from the grade in all other cases.5 Technical Bulletin 19-01 specifies that when multiple pitched roofs are present, the midpoint is measured from the roofline with the highest ridge. Technical Bulletin 19-01 further provides that, when the roofline for gable, hip, or gambrel roofs has unequal eaves, the midpoints of each side are averaged. For pitched (i.e., gable or hip) roofs, the current methodology uses the midpoint instead of the overall peak height because the peak generally has less impact on the bulk of the structure, and is often non-habitable space dedicated to rafters, HVAC, or attic space (See Fig. 4). 4 Technical Bulletin 19-01: Determining and Certifying Residential Building Height: https://www.fairfaxcounty.gov/landdevelopment/sites/landdevelopment/files/assets/documents/19 -01- determining-and-certifying-residential-building-height.pdf 5 Height, Building, Zoning Ordinance: https://online.encodeplus.com/regs/fairfaxcounty-va/doc- viewer.aspx?tocid=001.010.003.042#secid-2333 Fig. 4: Midpoint of the highest ridge in blue Fig. 3: Height Measurement by Roof Type for Principal Buildings Building Height Zoning Ordinance Amendment November 17, 2026 Page 3 CURRENT CHALLENGES Many single-family residential permit applications for new construction and additions now feature multiple rooflines as well as significant bulk on the upper floors of homes. Industry feedback has indicated a trend of 3- and 4-story homes with usable loft space on the top floors. Many of these homes approach the maximum 35-foot building height limitation for single- family dwellings allowed in most residential districts,6 and overall peak heights can reach up to 45 feet. The current method of measuring height at the midpoint of only the highest ridge does not always capture the overall height and bulk of a home, particularly when there is considerable bulk at the roofline. If a home with multiple rooflines has a lower ridge that incorporates significant bulk above 35 feet, this additional bulk is not accounted for in the building height measurement under the current methodology. For example, the home in Fig. 5 complies with the 35-foot maximum height under the current methodology since Roofline 1, shown in blue, has a midpoint height of 35 feet, but would not comply with the proposed standard, as Roofline 2, shown in red, has a higher midpoint height of 40 feet. This amendment is intended to standardize measurements across different types of home design and bring the overall bulk and height of homes closer to the 35-foot maximum height. Fig. 5: Roofline 1 (Highest Ridge) vs. Roofline 2 (Overall Highest Midpoint) Building Height Zoning Ordinance Amendment November 17, 2026 Page 4 INDUSTRY OUTREACH SUMMARY Targeted outreach to relevant industry groups included the Commercial Real Estate Development Association and Northern Virginia Building Industry Association (CREDA-NVBIA), the Engineers and Surveyors Institute (ESI), and a general industry professional meeting that included architects, home builders, and real estate professionals. Industry participants generally supported continued discussion of height and massing issues but expressed concern that overly restrictive height limits—like introducing a maximum peak height—could reduce design flexibility, limit usable living space, or create unintended architectural outcomes. Of the alternative options identified in the March 10, 2026, staff summary, industry participants preferred measuring building height at the midpoint of the roof with the highest eave over imposing a maximum peak height. The new proposed text reflects this feedback and is a refined version of that option—measuring building height at the highest midpoint regardless of whether it belongs to the roofline with the highest ridge or highest eave. PROPOSED ZONING ORDINANCE REVISIONS The proposed changes update the Zoning Ordinance definition and corresponding measurement of building height. Formatting change: The formatting of the definition has been updated to delineate roof height measurement method by roof type. This is similar to the format introduced in Technical Bulletin 19-01 and improves readability and clarity. Highest roof height, highest midpoint: When multiple roofs are present, building height would be measured to the highest roof height, defined separately for each section of roof. The proposal continues to define roof height at the midpoint of a pitched roof. This change from the current method would capture more bulk in the building height for a greater diversity of home designs, particularly designs with bulk on upper floors. Depending on design, the highest midpoint could be the roofline with the highest ridge or the highest eave (see Fig. 5). Additionally, the proposed amendment would measure the height of roofs with unequal eaves to the highest midpoint of the two slopes, which modifies the methodology set forth in Technical Bulletin 19-01. When a roof features unequal eaves, most of the bulk is contained in the slope with the higher midpoint (See Fig. 6). 6 The R-C and R-E Districts allow 40-foot-high single-family dwellings when a minimum 50-foot setback is observed; all other Residential Districts limit the height of single-family dwellings to 35 feet. Fig. 6: Roof with unequal eaves Building Height Zoning Ordinance Amendment November 17, 2026 Page 5 Dormer roof standard: A new standard is proposed for homes featuring dormers that comprise more than 50% of the width of the roof. Dormers are generally used as ornamental features but at larger widths can achieve more headroom on the top floor of a home (See Fig. 7). In jurisdictional comparisons, Arlington County and City of Alexandria employ similar dormer standards, as these jurisdictions see many additions that aim to preserve the existing home while increasing the livable space on the top floor through the addition of large dormers. When the total width of dormers exceeds 50% of the width of the roof, it adds considerable bulk and would then be considered an additional roofline when determining the roofline with the highest midpoint. Dormers smaller than 50% of the roof width would not be subject to this standard. New graphics: Updated graphics are provided to show concepts proposed with this amendment and clarify concepts maintained from the previous standards, including the measurement when multiple rooflines are present and the proposed dormer standard. NEXT STEPS Following meetings with the Board’s Land Use Policy Committee on November 24, 2026, and the Planning Commission’s Land Use Process Review Committee on December 3, 2026, additional outreach meetings with industry stakeholders (including ESI) and the general community will be held. This amendment is tentatively planned for Board authorization in March 2027. Information about this Zoning Ordinance amendment and outreach meetings is available on this website: https://www.fairfaxcounty.gov/planning-development/zoning- ordinance/residential-building-height. Questions and comments can be directed to Jenn Tran at Jennifer.tran@fairfaxcounty.gov or 703-324-1314. Fig. 7: Home with wide dormer Building Height Zoning Ordinance Amendment November 17, 2026 Page 6 Proposed Text In the revisions shown below, text to be deleted is identified with strike-through and text to be added is underlined. The proposed changes are based on provisions of the adopted Zoning Ordinance in effect as of October 26, 2026. INSTRUCTION: Revise subsection 9102 to amend the definition of Height, Building. Revise Figure 9102.1 to change the gambrel roof measurement to match the mansard roof measurement, and introduce new Figures 9102.2 and 9102.3 to show multiple rooflines and the dormer standard, respectively. Height, Building For principal buildings, the vertical distance to the highest point of the roof for flat roofs; to the deck line of mansard roofs; and to the average height between eaves and the ridge for gable, hip, and gambrel roofs measured from the curb level if the building is not more than ten feet from the front lot line, or from the grade in all other cases. For principal buildings, building height is the vertical distance to the roof height, as defined below, measured from the curb level if the building is not more than ten feet from the front lot line, or from the grade in all other cases. When multiple roofs are present, building height is measured to the highest roof height. Roof Height: 1. Flat Roof: measured at the highest point of the roof. 2. Gable, Hip Roof: measured at the average height (midpoint) between the ridge and the corresponding eaves. When multiple roofs consisting of at least one gable or hip roof are present, or for a roof with unequal eaves, roof height is measured at the highest midpoint. 3. Mansard, Gambrel Roof: measured at the deck line. 4. Dormer Roof: when the total width of dormers exceeds 50 percent of the horizontal width of either side of the roof, roof height is measured at the midpoint between the dormer’s eaves and the dormer’s ridge. Building Height Zoning Ordinance Amendment November 17, 2026 Page 7 Figure 9102.1: Height Measurement by Roof Type for Principal Buildings Figure 9102.2: Height Measurement for Multiple Rooflines Building Height Zoning Ordinance Amendment November 17, 2026 Page 8 Figure 9102.3: Height Measurement for Dormer Roofs 50% of Roof Width and Larger

Source: Fairfax County website. First collected Nov 15, 2026.