RecordWell Data

New Comprehensive Plan Stakeholders Committee Regular Meeting Agenda (PDF)

Loudoun County · Loudoun County · meeting of Mar 12, 2018 · Agendas

Open the original document More from Loudoun County

Text

Extracted automatically from the original. Tables and formatting may not survive; the original document is authoritative.

pg. 1 STAKEHOLDERS COMMITTEE MEETING | March 12, 2018 STAKEHOLDERS MEETING AGENDA Monday, March 12, 2018 6:00 PM Welcome / Administrative Items / Information Updates • Introductory Comments from Committee Chair – Jeff Salmon • General Updates – Alaina Ray • Meeting Objectives – Lou Mosurak 6:10 – 6:40 PM Envision Loudoun 2040 Transportation Plan Chapter Presentations and Discussion • Staff Presentation – Chapter Overviews – Lou Mosurak 6:40 – 6:55 PM Envision Loudoun 2040 Transportation Plan Policy Development Presentation • Staff Presentation – Policy Development – Marc Dreyfuss 6:55 – 7:55 PM Round Robin Discussion of Draft Transportation Chapters and Policies 7:55 – 8:05 PM Break 8:05 – 8:20 PM Envision Loudoun 2040 Transportation Plan Map Development Presentation • Staff Presentation – Marc Dreyfuss 8:20 – 9:20 PM Round Robin Discussion of Draft Maps 9:20 – 9:30 PM Preparation for March 19 Meeting • Staff Presentation – Lou Mosurak Important Documents A. Agenda 3-12-18 B. Staff Cover Memo 3-12-18 C. Transportation Plan Draft Outline D. Transportation Plan Draft Chapters 1-5 E. Travel Lanes, Bicycle and Pedestrian, and Revised Roadways Maps County of Loudoun Department of Planning & Zoning MEMORANDUM DATE: March 6, 2018 TO: Stakeholders Committee FROM: Ricky Barker, Director of Planning & Zoning SUBJECT: March 12, 2018 Stakeholders Committee Meeting As discussed at the Stakeholders Committee meeting on February 20, staff provided a presentation regarding a revised draft Comprehensive Plan Outline and noted that the Countywide Transportation Plan (CTP) component would be presented at the March 12 and March 19 meetings. The Draft Outline for the CTP is provided in the March 12 agenda packet for reference (Attachment C) and structurally follows the s ame general format and topic discussion as the proposed General Plan outline. It should be noted that the chapter and section titles, as well as the included content, are still being developed and are subject to further revisions. At the March 12 Stakeholders Committee meeting, staff will provide presentations regarding the following deliverables, which are included in the March 12 Agenda Packet: • The draft table of contents for the CTP; • Draft CTP Chapters, including Introduction (Chapter 1), Vision (Chapter 2), Countywide Plans (Chapter 3) , Geographic Policy Area Plans (Chapter 4) , and Air Travel Policies (Chapter 5); • A draft map showing proposed vehicular travel lanes; • A draft map showing proposed bicycle and pedestrian facilities ; and • A graphic identifying changed and added roadway corridors on the draft plan as compared to the 2010 CTP. The CTP chapters provided in the March 12 Agenda Packet generally do not yet include maps or graphics. The draft chapters are not presented in the publishing program format that will be used for the Plan; however, t he Stakeholders Committee will have the opportunity to review and comment on the publishable format for the entire Plan once the chapters have been further refined. The development of the draft chapters and maps is an iterative process and staff 2 | Page anticipates these documents will evolve and be revised throughout the Plan review and adoption process. It is intended that the March 12 and March 19 meetings be viewed as a single, two-part meeting. Additional materials will be provided prior to the March 19 meeting . It is anticipated that discussions from the March 12 meeting will continue at the March 19 meeting, and that endorsements from the Stakeholders Committee will be sought at that time as well. During the March 12 and all future Committee meetings to review the draft chapters , the sam e roundtable format will be used for feedback that was utilized at the March 5 meeting for comments and questions on the proposed General Plan chapters. Staff will continue to document Stakeholders comments and questions in the spreadsheet s that were utilized during the March 5 meeting. As discussed during that meeting, Staff will use those comments to m ake changes to the proposed Plan and document those changes in the spreadsheets. If certain comments do not result in changes to the Plan, staff will provide responses to those comments. The comment spreadsheets will accompany the proposed Comprehensive Pl an when it is forwarded to the Board of Supervisors and the Planning Commission for their review and consideration. As staff delivers the draft Plan to the Stakeholders Committee, there may be instances when staff does not support certain draft recommendations and/or when staff recommends revisions to the draft Chapters. Staff will provide the se Staff Positions to the S takeholders Committee for consideration and these Staff Positions will be carried forward for consideration by the Planning Commission and Board, if the positions are still applicable at that time. Transportation Plan Chapter Outline – DRAFT – March 12, 2018 I. Introduction and Enabling Text Plan Purpose and Relation to Other Planning Documents Transportation Planning History in Loudoun County II. Vision for Transportation The Foundation Public Input The Vision Transportation Network Goals Objectives of this Plan III. Countywide Transportation Network Motor Vehicle Plan (MVP) Bicycle and Pedestrian Plan (BPP) Transit Infrastructure Plan (TIP) Characteristics of Planned Roadways Toolkits Roadway Design Toolkit for Suburban, Transition, Rural, and Joint Land Management Areas Transit Infrastructure Toolkit IV. Transportation and Land Use Urban Policy Area (Silver Line CPAM) Suburban Policy Area Transition Policy Area Rural Policy Area Towns and JLMA V. Air Travel VI. Mitigating the Impacts of Development Review of Land Development Applications Parking Guidelines Traffic Management and Operations for Large Trip Generators VII. Regional, State, and Local Coordination Regional Coordination Potomac River Crossing Connectivity to Nearby National Parks and Trails State Coordination Local Coordination VIII. Environmental and Heritage Resources Environmental Resources Heritage Resources IX. Prioritization and Funding X. Implementation XI. Glossary and Index Appendices and supplemental information provided under a separate cover Chapter 1 – Introduction to the Countywide Transportation Plan (CTP) Loudoun County is one of the fastest growing counties in the nation. The unprecedented growth the County has experienced over the last several decades has resulted in continued and ever- increasing strain on its transportation network. Transportation continues to be one of the most important services provided by government, fulfilling the crucial role of linking people to their jobs, schools, recreation and shopping. As such, and in light of this environment of rapid growth, careful transportation planning must be undertaken to ensure that the mobility needs of the County’s citizens continue to be met over the long-term. Initiated in the summer of 2016, this edition of the Countywide Transportation Plan (CTP) builds upon the strong foundation provided by the 2010 CTP. It has been developed to accommodate planned land use and development through 2040and includes a revised and enhanced arterial and collector road network, including fac ilities for motor vehicles, bicyclists, pedestrians, and transit riders. The CTP also includes policies and strategies to address the connections between land uses, the built environment, the transportation network, air travel, development impacts, environmental and heritage resources, coordination with outside agencies, prioritization and funding of transportation infrastructure, and plan implementation. This plan also identifies strategies and opportunities for the protection and enhancement of neighborhood collector streets, to promote development of complete streets and safety throughout residential and community activity centers. This plan for the transportation network was developed and evaluated using criteria such as multimodal safety, forecasted facility demands (volume and capacity), potential impacts on the environment, heritage resources, quality of life, and concurrent land use plans and policies. This plan has been reviewed by th e Virginia Department of Transportation (VDOT) pursuant to Section §15.2-2222.1 of the Virginia Code and VDOT’s Traffic Impact Analysis Regulations Administrative Guidelines and conforms to of Section §15.2-2222.3 of the Virginia Code. Plan Purpose and Relation to Other Planning Documents The CTP provides the policy foundation for the County’s transportation network. The Comprehensive Plan provides policy guidance on land and infrastructure development. The CTP is a volume of the County’s Comprehensive Pla n, alongside other volumes such as the General Plan. The Comprehensive Plan forms the policy foundation for standards and regulations within the Zoning Ordinance, Land and Subdivision Ordinance, and Facilities Standards Manual, as well as amendments and updates to these regulatory documents. Transportation Planning History in Loudoun County Loudoun County has a long history of transportation planning. Following decades of small area plans for specific portions of the County beginning in the 1960s, the fi rst Countywide Transportation Plan was adopted in 1995. This plan focused heavily on creating mobility to support planned suburban development. The 1995 CTP created the framework for each of the subsequent countywide and small area transportation plans a nd the results of this initial plan can be seen through today’s roadway network. The 2001 CTP built upon the plans developed in 1995 , while placing greater emphasis on protections for the environment , historic towns and villages , and quality of life in the newly- designated Rural Policy Area . It also incorporated the Dulles Corridor Metrorail Project and included language encouraging the development of mixed -used urban -style developments, particularly in the vicinity of the planned Metrorail Stations. The 2010 CTP served as a forward -looking planning document that addressed the needs of Loudoun County by establishing a long-range vision for the County’s transportation network and defining policies that provide for the successful implementation of that net work. The transportation network included major roads, public transit services, bicycle and pedestrian accommodations, and airports, making this plan far more multimodal than previous iterations. The 2010 CTP also reconsidered appropriate capacity needs for roads, identifying the impacts of wide, high-speed corridors throughout the Suburban and Transition Policy Areas and included changes to ultimate planned conditions of roads to lower-capacity facilities where forecasted demand could be accommodated by fewer travel lanes. Chapter 2 – Vision for Transportation This plan is guided by a set of goals developed based upon public input and affirmed by the Board of Supervisors, providing the foundation for the entire document and ensuring that the public is the guiding force behind this vision. From those goals, the plan identifies the overarching objectives that this plan will seek to meet through implementation of th e planned transportation network and policies. The Foundation The 2010 CTP provided a strong framework for modern multimodal transportation planning in the County. Due to its robust and actionable policies, in coordination with previous editions and localized transportation plans, the County has facilitated development of its roadway, bicycle and pedestrian, and transportation networks. Throughout the County, new corridors have been completed and projects are underway through engagement of available public funding and private contributions to expand and complete planned networks. Through the policies of the 2010 CTP and 2003 Bicycle and Pedestrian Master Plan, County policy states that: • Connectivity and multimodal access are prioritized • Road design considers complete streets elements • Sidewalks and asphalt trails are constructed along both sides of all roads (except in the Rural Policy Area) • Transit systems are enhanced and sustained Through these policies, the County has completed more than 2,000 lane miles of planned arterial and collector roads, many featuring bicycle and pedestrian connectivity, expanded park and ride and transit options, and coordinated plans with Dulles Airport, Towns, and surrounding jurisdictions. This plan builds upon the previous policies, seeking opportunities to strengthen areas previously limited in scope while encouraging enhanced transportation choices and design strategies. Public Input The Envision Loudoun public outreach process encompassed three sets of public meetings at different stages throughout the process. The County also appointed a Stakeholders Committee with representation from each election district and an array of impacted advocacy groups from across Loudoun County. Detailed information about public feedback, including transportation comments, can be found in the General Plan document. Overall, feedback on the transportation planning effort focused on several key topics: • Improving access, mobility, and transportation options • Reducing traffic congestion • Enhancing options for access to the County’s Metrorail Stations, including expanded local bus service options between residential neighborhoods and Metrorail Stations • Encouraging development around Metrorail to enhance quality of life • Protecting the character and aesthetic of rural transportation options • Ensuring that transition area aesthetics provide an appropriate visual connection to the rural landscape • Providing adequate and complete networks of sidewalks, asphalt trails, and on- street bicycle lanes • Creating better connections across major roadways and natural barriers for pedestrians and cyclists • Introducing more off -road regional trails to allow for greater mobility and recreational opportunities • Calming traffic on neighborhood streets where people should feel comfortable walking or riding a bicycle • Enhancing connectivity to regional amenities, such as entertainment center, Dulles Airport, and regional parks • Improve streetscapes • Ensuring that transportation facilities are adequate to support new development This plan was developed with the intent to provide policies, guidelines, and implementation steps to achieve these community concerns and interests, and is driven by the following vision and goals: The Vision Efficient infrastructure networks that safely connect people to places within the community, to the region, and to the world. Transportation Network Goals 1. Enhanced multi-modal safety for all system users. 2. A reliable and efficient multi- modal transportation network that manages the travel demands of the County while maintaining fiscal and environmental sustainability. 3. Transportation choices that connect people to their communities, employment c enters, educational institutions, activity centers, and other amenities. 4. Integration with neighboring jurisdictions to improve regional and statewide connectivity and to attract residents and businesses to Loudoun County. 5. Support the growth and pot ential of enhanced national and international connectivity including consideration of Washington Dulles International Airport and the Silver Line Metrorail Stations. 6. Context-sensitive planning and design that addresses the different characteristics and needs of the urban, suburban, transition, Towns, JLMA, and rural environments. 7. A transportation network supportive of the County’s overall vision to support economic development, create vibrant, safe communities and public spaces, and protect natural and heritage resources. Objectives of this Plan With deference to and inspiration from the Transportation Network Goals, this document seeks to: • Provide comprehensive access and mobility for residents, workers, and visitors throughout Loudoun County. • Protect and enhance health and safety through design, construction, and improvement of quality transportation networks. • Promote high quality of life by protecting the integrity and opportunities provided within the County’s urban, suburban, transition, and rural areas, and supporting each of the incorporated towns within Loudoun County during planning, design, and construction of the transportation network. Access and Mobility Access and mobility are the two key indicators of success when evaluating a transportation system. Access describes the availability of practical connections between origins and destinations, while mobility describes the potential travel opportunities fro m a given place. This plan supports both high access and high mobility through a hierarchical and integrated roadway network that supports multi-modal transportation. Health and Safety Health and s afety are the most critical factors in evaluating the usability of the transportation network and the supportive role the transportation network has in promoting community and economic development. By emphasizing health and safety throughout every component of this plan, this objective seeks to ensure t hat multi -modal access is integrated into design and development, impacts from the transportation network to residences, schools, and businesses are mitigated, and that safety is of paramount concern throughout each stage of design and construction. Quality of Life The purpose of providing transportation facilities is to enhance quality of life. The transportation network and policies in this plan ensure that people and goods can reach their destinations, whether commuting to a job, visiting friends and family, enjoying leisure activities, or returning home. In this way, transportation ensures access to the elements that make for high quality of life, with quality of life enha nced through transportation improvements that decrease congestion, provide alternative routes and travel options, and make it easier to get to selected destinations. Chapter 3 – The Countywide Transportation Network This plan carries forward the County’s commitment to coordinate road network plans with land use, environmental policies , heritage preservation plans , and other policies of the General Plan. The transportation vision, composed of a network and associated policies to accommodate motor vehicles, cyclists, pedestrians, and transit riders, is intended to support the County’s proposed land use by ensuring that adequate transportation facilities exist to serve the mobility needs of residents, visitors, and businesses throughout the County. Four core sections are provided in this chapter to provide an overview of the Countywide Transportation Network. The Motor Vehicle Plan (MVP) provides a network of roadway travel lanes to accommodate the movement of passenger cars, light trucks and motorcycles , freight and delivery vehicles, transit service vehicles, and emergency vehicles. The Bicycle and Pedestrian Plan (BPP) provides a network of on- street and off-street facilities to accommodate cyclists and an off -street network of sidewalks and trails to acc ommodate pedestrians ( unpaved trails are discussed in the General Plan). The Transit Infrastructure Plan (TIP) provides a plan for infrastructure, including transit stations and shelters, transit -priority corridors, and park -and-ride lots to facilitate gr owth and development of transit systems. The Characteristics of Planned Roadways section brings these plans together to define how each planned corridor in the County will facilitate travel for each mode. These four sections, along with the specific geographic area policies in Chapter 4, are the foundation of the Countywide Transportation Plan, while policies provided throughout the other chapters of this document serve to guide for implementation of the planned roadways defined in this chapter. This chapter also includes two “Design Toolkits” at the end of the chapter. The first toolkit is a Roadway Design Toolkit which applies to the Suburban, Transition, Rural, and Joint Land Management Areas. Design standards for the Urban Policy Area are provided in Chapter 4. The second toolkit is a Transit Infrastructure Toolkit, which is applicable for all areas of the County. These toolkits serve to provide policy-driven guidance to localized planning and implementation, while also serving as the standards for every applicable public and private transportation project. Motor Vehicle Plan (MVP) Loudoun County’s roads form the backbone of its transportation network. This chapter outlines the vision and associated policies that govern the planning, design and oper ation of Loudoun County’s road system. It features a road network that attempts to address future congestion concerns for motor vehicles, access and connectivity for cyclists and pedestrians, and accommodations for transit, reflecting travel needs through 2040. This plan also considers the importance of ensuring that roads serving each of the unique policy areas are designed and constructed in a manner consistent with the character of adjoining communities and land uses. The County recognizes the limitations of the standard functional classification system, which traditionally emphasized operating speed and carrying capacity over other factors. By balancing mobility with access and by utilizing context-sensitive design techniques, the County is committed to achieving a complete and multimodal transportation network. Central to this commitment are Complete Streets. Complete Streets are safe for motorists, bicyclists, transit vehicles, and pedestrians of all ages and abilities. The complete street focuses not just on individual roads, but on the decision- making and design process so that all users are routinely considered during the planning, design, construction and operation of all roadways. This chapter identifies roadways as principal arterials, minor arterials, major collectors, minor collectors, and neighborhood collectors, with consideration for complete street components for each roadway type. Local streets policies are provided in Chapter 4 of this document. In order to plan the road network, County staff employed a combination of considerations, including public input, professional experience , institutional knowledge, and travel demand modeling to forecast future travel demands. These forecasts are based on observed local and regional trave l patterns and behaviors, anticipated growth in population, households and employment both inside and outside of the County, and the characteristics of the existing and planned roadway network. Road Capacity The extent of improvements needed within the network and along particular corridors was guided in large part by the adequacy of a given road facility’s projected capacity needs. These capacity needs are evaluated based upon forecasted traffic volumes under peak conditions on weekday mornings and weekda y afternoons. When volumes approach or exceed the capacity of a road segment, the operational efficiency of the road quickly deteriorates, leading to congestion, delays, and potentially unsafe conditions. The travel demand model forecasts the preference of traffic for certain road corridors to assign future trip demand. While the travel demand model serves as an estimate of future conditions, regular reevaluation of the road network is needed as new development is completed and land use plans are revisit ed and revised over time. If a particular road segment was forecasted to have an inadequate capacity based on proposed land uses, improvements were considered and evaluated for effectiveness in improving operations, either along the corridor or along para llel corridors, and incorporated into the network. Conversely, in locations where excess planned capacity was identified based on forecasted traffic volumes, rightsizing of the network was considered. Under either scenario, retesting was completed to ensure that the ultimate planned road network serves the anticipated needs of the County through 2040. While these forecast s played a significant role in appraising potential network improvement locations, the need to enhance the roadway network was also bal anced with contextual considerations by staff and County leadership as to whether such improvements were deemed practical, possible (given environmental or other physical constraints) and appropriate. Further consideration for the planned network is provided in the policies of this document that inform and support the implementation of the planned network. The results of this analysis are provided in Appendix XX. Level of Service Another indicator that is considered in transportation planning is Level of Service (LOS). LOS is measured on a scale of A through F, with A representing the least amount of forecasted delay at intersections, and F representing a substantial amount of del ay. Given the travel demand in an urbanized region, a certain threshold is established by policy to define acceptable levels of delay relative to the conditions of the surrounding area. This ensures that an efficient roadway network can be planned without overcompensating to accommodate for only the highest demand during a few minutes each day, which would require substantially more travel lanes and road corridors than are envisioned by this plan. In order to account for the diversity of places that bene fit Loudoun County, this plan defined adequate LOS differently in different Policy Areas, understanding that reasonable delay in planned urban centers may be different than that in auto- oriented suburban neighborhoods or rural areas . Since LOS is an indic ator of intersection operations, this level of analysis was not completed with this high -level plan, but would be considered as part of public and private roadway improvement projects, and may be considered during subsequent small area planning efforts. Maintenance Roads are generally maintained either by VDOT or through private associations, such as homeowners associations. VDOT’s Road Design Manual, Road and Bridge Standards, and Secondary Street Acceptance Requirements (SSAR) contain design and construc tion standards required for roads to be incorporated into the State Highway System and for road improvements for those facilities already a part of the State Highway System. VDOT has design standards for the wide variety of secondary roads that exist in Loudoun County, ranging from rural local roads to subdivision streets and collector roads. However, as the County adopted policies to encourage creative forms of residential development and for preservation of the character of the County’s rural roads grew , so has the need grown for greater flexibility in the application of VDOT standards. Since the adoption of the 2010 CTP, the VDOT Road Design Manual was amended to include new standards for multimodal facilities in mixed -use urban centers. This provides an excellent opportunity for the County to work with VDOT to ensure that the planned land uses in the Urban Policy Area are supported by compatible transportation facilities. As the maintainer and operator of all public roads in the County (with limited exce ptions), VDOT is responsible for the operational integration of the roadway network. Therefore, it is critical to ensure that all road design, engineering, and construction in the County has a positive impact on VDOT’s ability to maintain an efficient network. Private Streets Many local streets in the County are privately maintained and are therefore not in the VDOT maintenance system. The use of private streets in Loudoun County is only permissible for certain types of development as permitted by County Ordinance, usually requiring parcels to have frontage on a public road (except when part of an historic district or residential subdivision) . During the rezoning process, modifications may be needed to permit private streets. In certain cases, private streets are needed to support the planned development. Developments that include perpendicular or angled parking along streets must be private, as this feature is not permitted by VDOT design standards. Regardless, all private streets must meet the design and construction standards of the County’s Facilities Standards Manual. VDOT continues to advise against the use of private streets for new development because of concerns related to maintenance, connectivity of the road network, and consistent design standards. County and VDOT policies call for provision and use of interparcel connections within and between developments in order to promote connectivity and options for local traffic. Additionally, road maintenance is an expensive commitment as it includes repair and upkeep of roadways, curbs, accessible curb ramps, and stormwater management, as well as snow removal, landscape care, and street cleaning. In residential communities, the maintenance resp onsibility for private streets generally falls upon a property-owners association, such as a homeowners association (HOA). In order to ensure successful maintenance of private streets, it is important that road maintenance be adequately funded for current needs and that a fund is established for future maintenance and emergency repairs. The maintenance program must ensure a state of good repair and be capable of providing access as soon as possible after snows or other emergency situations. Traffic Calming Following construction of a road, observations and data may indicate that vehicles are traveling at a rate of speed that is higher than was intended or is desired. Traffic calming is intended to modify driver behavior, reduce vehicle speed to legal limits , increase safety for all users of the roadway, and improve the quality of life through minimizing the negative effects of motor vehicles on neighborhoods. By slowing vehicles, it encourages the use of other modes of transportation such as walking and cycl ing. Traffic calming is typically implemented on residential streets, but can also be applied in activity centers with high pedestrian activity. Common techniques for implementing traffic calming on residential streets include vertical changes to the street (speed tables, raised intersections), lateral changes to the travel way (chicanes, offset intersections, lateral shifts), constrictions to the travel way (narrowed pavement widths, pinch points, islands, traffic circles or roundabouts, entrance features , small corner radii), and streetscape improvements (surface textures, edge treatments, colors, landscaping, street trees and street furniture). Traffic calming may also include measures such as community education and enforcement. The County works closely with VDOT to implement traffic calming measures where needed. COUNTYWIDE MOTOR VEHICLE PLAN POLICIES (SEE CHAPTER 4 FOR POLICIES RELATED TO GEOGRAPHIC POLICY AREAS ) 3-1.1 Road Standards Roads will be built to the standards and conditions described in this plan. 3-1.2 Land Development Plans Planned roads will be incorporated into every stage of the land development process, including planning, design, and construction, including provision of necessary rights-of-way or easements to accommodate the facility, as determined in this plan. 3-1.3 Missing Segments It is a priority of this plan that safety concerns, gaps in the existing road system, and connections to collector and arterial roads be addressed to serve neighborhoods and employment centers already in place. 3-1.4 Focus Areas The County will prioritize transportation funding to the Urban and Suburban Policy Areas where planned land uses and population densities warrant the expansion of roadway capacity and the implementation and expansion of transit services. 3-1.5 Parallel Roads Suitable alternative access to existing uses, including parallel roads where planned, shall be constructed prior to establishment of limited access freeways. 3-1.6 Dulles Loop The County will work to implement the “Dulles Loop” as a system of limited access roads that encircle Dulles Airport in Loudoun and Fairfax Counties composed of Route 28, US Route 50 and Route 606 in order to improve travel in the vicinity of the airport. 3-1.7 Managed Lanes The County will study opportunities for implementation of managed lanes, including HOV, HOT, and Transit -Only Lanes along planned limited access corridors and other major commuting routes, when these facilities are considered for expansion to their ultimate planned conditions. 3-1.8 Spot Improvements Intersection and safety improvements on primary roads are considered to be part of this planning document throughout the County. 3-1.9 Natural Features The County will maintain vegetation and woodlands along ro adways and incorporate landscaped medians using native species where possible. 3-1.10 Electric Vehicles To promote the use of electric vehicles, this plan supports provision of electric vehicle charging stations, recognizing that this emerging technology will nee d to be revisited as new innovations impact public demand for alternative fuel vehicles. 3-1.11 Plan Coordination Roadway design characteristics will conform to the standards of the applicable road design toolkit and associated policies for the associated Geographic Policy Area and will complement the streetscape design guidelines and other policies of the Comprehensive Plan. 3-1.12 VDOT Coordination The County will coordinate with VDOT to seek changes in VDOT policies and standards to ensure conformity with the land use , environmental, heritage preservation and other policies of this plan while providing a safe, efficient, and cost-effective transportation network. 3-1.13 Public Roads All new public roads will be planned and constructed to VDOT standards for acceptance into the State Highway System. As appropriate, the County will seek waivers and exceptions to these standards when warranted as part of planning or design. 3-1.14 VDOT Standards Roads shall be constructed in accordance with VDOT and County design standards, as appropriate based upon future maintenance responsibilities, and shall be subject to review and comment by County and VDOT 3-1.15 Complete Streets All road construction will strive to provide all of the elements of a Complete Street, with consideration of context-sensitive design, to create roads that are safe for all users. 3-1.16 VDOT Improvements The County will work with VDOT to continue and enhance maintenance of public roads by supporting repaving efforts, encouraging construction of spot safety improvements, and coordinating to identify opportunities for optimizing use of existing pavement. 3-1.17 Pavement, Marking, and Signage DTCI shall be provided with opportunity to review and comment on all PMS (Pavement Marking and Signage) Plans and all construction plans for Arterial and Collector roadways within the County to ensure coordination with this plan. 3-1.18 Functional Classifications The County shall work with VDOT to determine appropriate functional classifications for roadways and work to correlate these classification for all roads in the County to ensure consistency between County and VDOT classifications for roadways. 3-1.19 Primary Routes As major cross-county secondary road corridors are completed, VDOT reclassification of these corridors to primary routes should be pursued. 3-1.20 Arterial Preservation Significant arterial roadways, including all primary corridors and principal arterial roadways in the County, will be designed and maintained to support the flow of traffic through the County and the region, limiting local access points, and minimizing the use of traffic controls and allowances for cross-traffic. Preservation of these corridors will be coordinated with VDOT for acceptance into the VDOT Arterial Preservation Program as Mobility Enhancement Segments, and design of these corridors will be evaluated based upon the standards set forth for improving mobility in the VDOT Road Design Manual and Traffic Signal Justification Report Requirements. 3-1.21 Permissibility of Private Streets The County will encourage public streets while allowing private streets where needed to support alternative solutions for a proposed development pattern that would better address plan policy and would be unsupported by VDOT SSAR standards. This determination will be made by the County and VDOT based upon applicable County ordinances. 3-1.22 Responsibility for Private Streets Maintenance of private streets will be the sole responsibility of the identified private sector entity in perpetuity. Such streets are not eligible for acceptance into the public street system. Neither VDOT nor the County will accept maintenance responsibility for any private street. 3-1.23 Private Street Improvements All street improvement projects along private streets, including traffic calming measures, will be the sole responsibility of the private maintenance entity. 3-1.24 Public Road Access For lots accessed from private roads or easements, demonstration of safe access to the public road network will be provided. 3-1.25 Financial Responsibility for Private Streets The maintenance responsibility for private streets will be insured by a bond or other long-term surety approved by the County before approval of the private road. In each case where County ordinances allow private streets, there will be language specifying the entity that will provide for maintenance of the road and that neither VDOT nor the County have, or will have, responsibility for the maintenance, repairs, or improvements. 3-1.26 Community Traffic Calming Measures The County will promote and implement traffic calming measures in all policy areas through community -based and supported programs, small area plans, development applications, and collaboration with VDOT. 3-1.27 Types of Traffic Calming The County will work collaboratively with VDOT and the community in identifying appropriate traffic calming measures within the context of the surrounding area. Measures will be analyzed to determine the most effective tool for each project in coordination with surrounding residents and businesses. 3-1.28 Cut-Through Traffic Opportunities to mitigate cut-through traffic shall be evaluated with consideration of alternative routes and continuity of the network. Bicycle and Pedestrian Plan (BPP) Loudoun County aspires to be a place where pedestrians and bicyclists of all abilities have a safe, secure and convenient transportation network of walkways and bikeways that enable efficient movement to and from home, work, school, shopping, libraries, parks and community centers. To accomplish this, effective planning for the cyclist and pedestrian is integrated within each stage of planning, design, and implementation. Buildout of planned bicycle and pedestrian networks will lead to enhanced quality of life by providing: mobility, connections, and increased options for bicycle travel ; improved access to public transportation, employment, and other activity centers ; a cleaner environment through reduction of air pollution caused by single -occupancy vehicle trips ; expansion of the rural economy by providing the opportunity for visitors to experience the County’s beauty through biking; and preservation of cultural and natural resource corridors for public enjoyment through the designation of shared use paths, bicycle routes, and improved signage. Bicycle Network This plan sets forth a vision of a comprehensive bicycling network, with on- street bicycle lanes, asphalt trails, marked bicycle routes, and other accommodations to improve the viability of bicycle commuting, recreation, and tourism. The spine of the County’s bicycle network is the Washington & Old Dominion (W&OD) Trail that provides an east-west route through the central parts of both eastern and western Loudoun County. The County is working to improve safety and connectivity along the W&OD Trail, studying and implementing grade -separated crossings at high -traffic corridors and improved at -grade crossings at others. Connections to the W&OD Trail provide access from nearby locations, allowing opportunities for trips to and from major transit hubs such as Metrorail Stations, commercial and entertainment centers, residential neighborhoods, and rural economy uses. Through the land development review process, the County will implement the improvements detailed in this plan along new and existing roads. In built -up areas, including developed areas near Metrorail stations, public efforts are envisioned to complete bicycle network development. The County recognizes that a variety of facility types are needed based on the context of the built environment and roadways in different areas of the County. Accommodations for bicyclists along roadways include on-street bike lanes, buffered on- street bike lanes, off-road asphalt trails, wide curb lanes, and paved shoulders. Along existing roads, variations in traffic volumes, traffic patterns, and roadway designs, are of paramount consideration when considering facility types. Along new roads, design constraints due to topography, available right -of-way, design speed, anticipated traffic volumes, and historic and natural resources are also considered as part of facility design. Furthermore, the needs of different user groups vary from experienced bicyclists who often prefer on-street facilities to the less -experienced riders who find off -road shared use paths more conducive to comfortable travel. The complete reliance on an off -road shared use path system is not possible or desirable due to costs and funding constraints, as well as diverse public preferences. Within a suburban street setting, off-street trails may create dangerous conditions at intersections, where drivers are less aware to the presence of cyclists. By bringing bicycle facilities onto t he road, the awareness of drivers and cyclists to each mode of travel is increased, leading to greater attentiveness to multimodal safety. However, on higher speed, wider auto -oriented facilities, the difference in anticipated speed and driving habits may make greater separation of these modes more preferable. Pedestrian Network Pedestrian-friendly communities are a key component of an effective multimodal transportation system. Not only does every trip begin with walking, but safe, logical, and efficient pedestrian connections can significantly decrease the need to drive for short trips. Walking is the only form of transportation that is completely free and has positive impacts for personal health and no negative environmental impacts. The County has a substantial pedestrian network, but significant work still needs to be done to provide comprehensive pedestrian opportunities for all residents, workers, and visitors. Generally, such needs include additional sidewalks along roads and between subdivisions where missing, better lighting, safer and appropriately wide sidewalks, and improved road crossings, especially along wider and higher -speed roads, through installation of more and better marked crosswalks. Countywide Bicycle and Pedestrian Policies 3-2.1 Purpose Bicycle and pedestrian facilities will be built to the standards and conditions described in this plan and in accordance with the Roadway Design Toolkit. 3-2.2 Road Projects Contextually-appropriate bicycle and pedestrian facilities will be included as part of all public and private secondary road construction and improvement projects. 3-2.3 Prioritization Priority shall be given to construction of bicycle and pedestrian accommodations and connections associated with arterial and collector roadways with emphasis on the completion of connections between existing facilities in an effect to provide regional connections, and to the provision of safe walking and bicycling routes to new and existing public schools. 3-2.4 Design Standards All bicycle facilities will be designed in accordance with VDOT standards and with considerations of the American Association of State Highway and Transportation Officials ( AASHTO) and National Association of City Transportation Officials ( NACTO) guidelines, the Americans with Disabilities Act (ADA ), and the policies within this plan. 3-2.5 Land Development Plans Bicycle and pedestrian facilities will be incorporated into every stage of planning, design, and construction, including necessary rights -of-way or easements to accommodate the appropriate facility types, as determined in this plan. Such facilities will be provided regardless of the existence of connecting facilities. This full integration will reduce the cost of designing the facilities into a project at later stages of design and engineering and ensure that the needs of bicyclists and pedestrians are met. 3-2.6 Timing Bicycle and pedestrian facilities along existing or pro posed CTP roads will be provided at the commencement of a project, or the associated phase of the project, regardless of whether connections from adjacent properties are already in place. 3-2.7 Site Connections All land development applications shall provide int ernal bicycle and pedestrian circulation systems connecting building entrances, parking areas, and other bicycle and pedestrian destinations within the site, and will demonstrate that the facilities are designed to be safe, direct and barrier-free. These systems will also address connections to existing and planned bicycle and pedestrian facilities along the public road network and adjacent properties through direct, safe, and logical routes. 3-2.8 Site Access Child care centers, schools, and similar uses will provide safe and uninhibited pedestrian access between entrances, parking lots, play areas, adjacent roadways, and auxiliary buildings. 3-2.9 Community Access Public schools and other community facilities and uses shall be designed to encourage students and patrons to walk or bike to school through provision of connections to adjoining roads and subdivisions in all directions and implementing safe routes to school programs to improve access and educate students. 3-2.10 Trail Crossings The County shall actively seek to c reate grade-separated crossings for major bicycle and pedestrian corridors, such as the W&OD Trail, Broad Run Linear Park, and Goose Creek Trail. Grade-separated crossings of the W&OD Trail will be required for all roadway improvement projects at trail cro ssings at no cost to the Northern Virginia Regional Park Authority (NVRPA). 3-2.11 Crossings Safe, convenient, and visually attractive crossing options will be considered at each stage of development and planning to enable pedestrians and bicyclists to comfortably cross major thoroughfares. Alternatives may include new intersection designs, pedestrian and bicycle overpasses and underpasses, and other options that separate or limit exposure to vehicular traffic. 3-2.12 Public Outreach The County shall engage the public to prioritize and identify funding and alignments for bicycle and pedestrian improvements. Transit Infrastructure Plan (TIP) Loudoun County has a long history of transit planning and operations, including decades of support and planning for the Dulles Corridor Metrorail Project (Silver Line) from Falls Church through Tysons and Reston and into Loudoun County. With revenue service to station stops at Dulles Airport and in the Ashburn area anticipated to begin shortly after adoption of this plan, a new and expanded approach to transit services is underway. This plan provides a guide for general and targeted transit infrastructure. Service plans can be found in the County’s Transit Development Plan (TDP). Currently, the County operates three distinctly branded bus transit services, each serving different destinations and rider bases, and provides support to the Washington Metropolitan Area Transit Authority (WMATA) as a member jurisdiction. • Premium Commuter Bus Service (Long-Haul) travels between County park-and-ride lots and major job centers in Arlington County and Washington, DC. This service provides 112 weekday trips with 987,000 annual rides (FY 2016). • Metro Connection Service operates seven routes between County park- and-ride lots and Metrorail Stations in Reston and Falls Church. This service provides 274,000 annual rides (FY 2016). • Local Fixed-Route Service provides intra-jurisdictional curbside bus services on 15 routes throughout Eastern Loudoun County. This service provides 445,000 annual rides (FY 2016). The County also provides demand-response services to qualifying individuals in the vicinity of its local fixed route bus services. In Western Loudoun County and the unserved areas of Eastern Loudoun County, Virginia Regional Transit (VRT) operates demand-response services to support these communities. VRT also operates a local fixed -route service between Purcellville and Leesburg. Metrorail Planning The completion of the Silver Line represents a commitment of significant County resources, as well as a need to change the focus of the County’s public transportation strategies. The most recent iteration of the TDP recommends a complete transition from a pre -Metrorail transit system to a transit system that incorporates and considers the Silver Line as the spine of transit services for the entire County. With this change, the County envisions an integration of Metro Connection and Local Fixed-Route services into a singular combined service plan. The benefits of this service include: • Improved scheduling and connectivity • Increased access to jobs and entertainment, driving opportunities for ridership growth • Expanded integration with Metrorail and Long-Haul Services • Better customer experiences through unified technological and service systems In order to minimi ze system redundancies and ensure optimal use of public funds, Long -Haul is planned to continue its operations as a premium service, with an aim of maintaining cost neutrality, meaning that revenue from fares and advertising support the cost of services. It is anticipated that the dependability and comparative value of Metrorail with considerations of cost and travel time will highly impact the future viability of Long -Haul. Therefore, the County will continue to evaluate all options on a regular basis following the opening of Metrorail revenue service. Transit Infrastructure Goals I. Provide a safe, affordable, convenient, efficient and sustainable multi-modal transportation system to serve the County. II. Provide an integrated transit system to connect regional centers, neighborhoods, attractions and employment and retail centers. III. Ensure the transportation system and land use policies foster greater transit use through incentives or management of parking, supportive services, and other public/private initiatives. IV. Utilize investments in the transit system to enhance and promote economic development in the County. Improving Transit Infrastructure As a service-based mode, transit is as dependent on the quality of the service as it is on the infrastructure placed to support utilization and ridership. Transit infrastructure can best be defined as the physical attributes of transit, such as vehicle type and design, stations and stops, rails and lanes, transit signal priority (TSP), and even branding. The other characteristics of transit, such as frequencies, routing, fleet sizes, financial planning, operations and maintenance, and anything else that would be a component of the TDP would fall under the auspices of transit operations. In order to build a more robust core network structure atop the Silver Line “spine”, this plan includes identification of transit corridors. These corridors have been identified through a combination of considerations of existing routes, existing and planned population densities, street functions, and planned service changes in the TDP. Above all, this plan emphases utilization of Silver Line stations and attempts to link both regional and community activity centers in a way that supports mutual interaction between residents and workers in those areas. This network of transit corridors serves as a starting point for countywide improvements. It creates a transit infrastructure supportive of greater densities and growth at activity centers, establishes highly visible and managed transit corrid ors capable of linking multiple activity centers through the use of multiple routes, shifts transportation mode shares in the denser and more congested eastern portion of the county, introduces logical feeder service to Metrorail and commuter bus service i n currently unserved areas, provides opportunities to reassess present and future importance of activity centers as development occurs, and allows consideration of the role of the Dulles Greenway and nearby park-and-ride facilities in providing express services for riders from central and western portions of the County. Conversely, as a framework, this network is limited. It does not add significantly enhanced coverage to currently underserved areas, requires additional consideration of transit -only lanes, transit-priority lanes, and more robust facility investments as part of corridor improvements, and needs further study of the best locations for investments in additional base or premium services while maintaining reasonable service levels along existing routes. Key Components of Transit Infrastructure Planning There are several components to planning a robust network of transit infrastructure. The list below provides options related to some of the ways that a complete network can be achieved. Each corridor and location is different and may require different design standards. • Branding: Unified color and font schemes on vehicles, at station stops, schedules and brochures, websites, and signage. • Vehicle Type and Design: Clean and functional service vehicles with appropriate capacity, accessibility, and design to be visible and convenient for all riders. • Stations and Stops: Comfortable places to board and alight vehicles, including amenities that may include shelters, seating, lighting, trash, heating, restrooms, retail, and service information. These should be designed commensurate with anticipated usage and surrounding development patterns. Where intended to remove drivers from the roadway network, these should be designed with parking that is coordinated to ensure safe bicycle and pedestrian access as well as economic development opportunities. As possible, these should be located at or near the actual stop location of the transit vehicle. These facilities can provide opportunities for marketing and other business partnerships. • Rails and Lanes: Dedicated space for operation of transit vehicles to improve travel times and dependability. May encompass an entire transit line or may be provided for a portion of service area. • Transit Signal Priority: Sensor-activated traffic signals that provide extended green time to facilitate movement of buses or allow buses to “jump” a signal via special signals that allow buses to utilize a right-turn lane to advance through an intersection ahead of other traffic. • Land Use Planning: Quality features will achieve the greatest results when paired with transit-friendly land use planning and development, including connectivity to other modes, activity centers, and population densities that can support robust services along a corridor. Park and Ride Lots Park and ride lots are a critical component of the County’s transportation system. They provide space for commuters to park their cars and commute via carpool, vanpool, or transit. Park and ride lots help reduce traffic congestion and pollution, assisting the region in meeting Clean Air Act requirements. Park and ride lots also provide an effective means for residents to manage travel costs by sharing the ride with others. In certain locations, successful park- and-ride lo ts can transition to become successful transit -oriented development sites, reserving and making use of land that can later be used for more intensive development. This long -range strategy may be appropriate in the Urban Policy Area and in the Transit Corri dors. As demand for Park and ride spaces continue to grow, the County will need to identify strategies to make efficient use of available land and transit operations opportunities. Countywide Transit Infrastructure Policies 3-3.1 Transit Toolkit Transit infrastr ucture shall be designed to meet minimum standards as outlined in this chapter’s Transit Toolkit. 3-3.2 Planning Studies of transit infrastructure improvements will evaluate and identify system priorities that will provide the greatest benefit to all users, enhancing transit infrastructure in response to population growth and congestion. 3-3.3 Amenities Transit amenities will be provided consistent with standards described in the transit toolkit with consideration of forecasted demand for transit service based upon development patterns and service frequencies. 3-3.4 Information Signage Boarding locations for all transit and shuttle services will be designated and signed with schedules, service and fare information posted at boarding locations. 3-3.5 Barriers At all planned and exi sting transit facilities, projects shall identify and rectify barriers to transit station or stop access for cyclists and pedestrians, including built and natural features, lacking sidewalk and trails, and lacking transit shelters and pads. 3-3.6 ADA Accessibili ty Transit stations and stops and adjoining public and publically - accessible spaces will be made accessible to persons with disabilities in accordance with the Americans with Disabilities Act (ADA) and other applicable requirements. 3-3.7 Land Use The County will support opportunities and investments in transit infrastructure by planning and implementing land uses that will facilitate increased levels of transit ridership in the Urban and Suburban Policy Areas. 3-3.8 Transit-Oriented Development The County will direct new development to the Urban Policy Area and Transit Corridors to improve the viability and cost -effectiveness of the future transit services and reduce traffic congestion in these areas. 3-3.9 Transit Access The County will require design features to improve transit accessibility and efficiency, such as grid street patterns and streetscapes that accommodate pedestrians and bus stops. County review of applications along Transit Corridors will consider station or stop access, transit vehicle stop location, pede strian and bicycle circulation, and other features related to transit-oriented design. 3-3.10 Interim Densities The County may permit interim development along transit corridors at densities lower than those needed to support viable services so long as the propos ed development patterns do not inhibit the ability of the site to reach its planned development potential as part of future development program. 3-3.11 Mode Split Development applications along Transit Corridors are anticipated to achieve a minimum 10% mode split via transit through incorporation of TDM policies. 3-3.12 Park and Ride Locations Park and ride lot locations will be strategically identified and will be located along or proximate to arterial roads and connected by sidewalks or asphalt trails to public bicycle and pedestrian networks. 3-3.13 Existing Park and Ride Lots As feasible, the County will evaluate opportunities to expand existing park-and-ride lots prior to acquiring land and constructing new lots in the same general vicinity. This will allow improved serv ice frequencies and increased opportunities for local transit service connectivity. 3-3.14 Park and Ride Lots by Policy Area Park and ride lots, which do not include Metrorail parking garages, shall not be constructed or expanded in the Urban Policy Area. Existi ng park and ride lots in the Urban Policy Area shall be evaluated for relocation into the Suburban Policy Area as development within these areas provides opportunities for more robust uses of available land. 3-3.15 Park and Ride Shared Lots Park and ride lots may be co -located with other complimentary uses, so long as it can be demonstrated that the park -and-ride lot and the adjoining use will not impact the safe and efficient operations of the other use. 3-3.16 Park and Ride Access Park and ride lots will be designated to provide convenient and safe access, meeting ADA requirements, between the bus stopping location and the parking areas. 3-3.17 Park and Ride Calculations Park and ride lot facility needs will be calculated on the basis of one commuter park and ride space for every 30 households approved for development in the Suburban, Transition, and Rural Policy Areas. 3-3.18 Park and Ride Amenities At minimum, park-and-ride lots will include adequate lighting and waste receptacles. Lots will a lso include amenities such as seating, bicycle parking, indoor waiting areas, retail amenities, restrooms, recreational trails, and informational kiosks. 3-3.19 Private Bus Shelters Bus shelters erected on private property will be provided within a public access easement and will be maintained by the property owner for service of public transit vehicles and private shuttles, with the following guidelines: trash is to be removed at minimum twice a week, all graffiti to be removed immediately from shelter, landscaping is to be maintained regularly, lighting will be in working order, and the shelter structure will be repaired and replaced as needed. 3-3.20 Funding The County will pursue funding opportunities to improve and enhance transit infrastructure through development applications, special tax districts, public -private partnerships, bond referendums, and other identified funding sources. 3-3.21 Public Outreach Throughout the planning and development of transit infrastructure, the County will seek the input of the Transit Advis ory Board and general public concerning locations, funding, and implementation of improvements. 3-3.22 Plan Coordination Transit Infrastructure Plan implementation will meet the policies and intent of this document as well as other policies of the Comprehensive Plan. Characteristics of Planned Roadways Planned roadway corridors in this plan consider the needs of all system users, including drivers, cyclists, pedestrians, and transit riders. In order to accommodate this spectrum of travelers, road corridors show n on the maps provided in this chapter are further defined by typical sections provided below. It is understood that road improvement projects each feature unique challenges related to environmental preservation, public input, and the surrounding built environment. Therefore, modifications to the assigned section for each roadway segment in this plan may be necessary for implementation. However, all reasonable efforts should be made to accommodate safe and efficient multimodal mobility and operation throug h each stage of the planning, design, and construction processes. There are several characteristics that help inform and describe the section and purpose of a given road segment. The most prominent characteristic is modal accommodation, which are the physical attributes, such as travel lanes, bike lanes, asphalt trails, sidewalks, and transit shelters that together comprise the roadway . Other important physical characteristics include the widths of these facilities, the presence of intersection improvemen ts such as turn lanes and traffic controls, and accommodations for bicycle and pedestrian crossings. Other attributes that impact the design and character of a roadway include functional classification, which identifies the intent and purpose of a segment and attempts to inform design accordingly, and design speed, which impacts how the road is intended to operate. In order to standardize these factors, this plan provides a set of typical street sections that apply to each corridor identified to provide gre ater guidance to transportation improvement projects. Functional Classification A planned roadway network includes consideration of hierarchy to ensure that each corridor and segment is designed to appropriately address the needs of the traveling public. T hese functional classifications determine or relate several characteristics of a roadway, including anticipated design speeds, requirements for turn lanes, the prominence and significance of the road within the network, and the types and designs of bicycle and pedestrian facilities that are appropriate for the corridor. The following functional classifications relate roadway classifications that exist within Loudoun County. (The highest functional classification level – Principal Arterial – Interstate (Level 1) does not exist within Loudoun County). Principal Arterial – Freeway (Level 2) This classification relates planned limited access freeways and parkways where at -grade and local access is not anticipated. These corridors provide the highest level of mobility and promote long- distance travel in to, across, and out of the County. Examples include Route 28, the Dulles Greenway, and significant portions of Route 7 and US Route 50. Principal Arterial – Freeways are intended to feature the following standards: • 60 MPH Design Speed • All at-grade access terminated, with access provided via interchanges at identified locations • Local access will be provided via other public roads along the corridor, which will be provided prior to any closure of access. • Under interim conditions, will be designed with 60 MPH design speed and other standards based on the Principal Arterial – Expressway (Level 3) classification. Principal Arterial – Expressway (Level 3) This classification relates to planned at- grade arterial expressways where at-grade access is highly controlled, preferred only at major intersections. Examples include Loudoun County Parkway, Route 7 in Sterling, and Route 15 north of Leesburg. Principal Arterial – Expressways are intended to feature the following standards: • 50 MPH design speed • Highly-Controlled at-grade access, with local access provided via other roads or, where alternative access is not available, via consolidated multi- parcel access points. • Left- and right- turn lanes at all intersections Minor Arterial (Level 4) This classification relates to planned at-grade arterial roadways where design is focused on intra-county mobility and connections to Principal Arterial corridors. Examples include Algonkian Parkway, Belmont Ridge Road, Northstar Bouleva rd, and Route 9. Minor Arterials are intended to feature the following standards: • 50 MPH design speed • Moderately controlled at-grade access, with local access provided via consolidated multi-parcel access points. • Left- and right- turn lanes at all intersections Major Collector (Level 5) This classification relates to planned at -grade collector roadways that serve to provide connections between communities and arterial corridors. These seek to balance access and mobility by providing equitable measur es for all travel modes, while also providing separated areas between each type of roadway user. Major Collectors are intended to feature the following standards: • 40 MPH design speed. • Somewhat controlled at-grade access, with local access provided via a single access point and consolidation of access highly preferred. • Left-turn lanes at all intersections. Right turn lanes at major intersections and where warranted. Minor Collector (Level 6) This classification relates to planned at -grade collector roadways that serve to provide connections within communities. These corridors are designed to promote multimodal access by emphasizing the needs of bicyclists and pedestrians with consideration of the needs of motor vehicles, including transit vehicles. Minor Collectors are intended to feature the following standards: • 35 MPH design dpeed • Access must meet VDOT requirements for collector roadways. • Left-turn lanes at major intersections and where warranted. Right-turn lanes where warranted. Neighborhood Collector (Level 7) This classification relates to planned at -grade collector roads that serve to provide access within a neighborhood. These roads are generally built with a development and serve as major gateways within and through neighborhoods and often feature limited numbers of direct driveway access points. Therefore, these streets serve greater amounts of traffic than a typical neighborhood street and require special consideration to ensure safety and multimodal access. Neighborhood Collectors are intended t o feature the following standards: • 25 MPH design speed • Local access permitted. • Left-turn lanes at major intersections when warranted. • Traffic calming measures anticipated. Local Secondary Road (Level 8) The remainder of streets in the County are functionally classified at Local Secondary Roads. These facilities are meant to provide local access within subdivisions and other developments. Local Secondary Roads are intended to feature the following standards: • 25 MPH design speed • Local access permitted • Bicycles share the road • Five-foot wide pedestrian facilities along both sides of the road Arterial and Collector Roadway Identification and Street Sections The street sections below relate motor vehicle and bicycle and pedestrian accommodations for planned roadways including: • Cross-sectional elements (i.e. shoulder and ditch or curb and gutter) • Functional classification • Number of travel lanes • Turn lane requirements • Provision of on-street parking • Asphalt trail width • Concrete sidewalk width • Pedestrian refuge requirements **Typical street sections and roadway assignments will be provided later in the process based on review and updates to the roadway plans, including ultimate travel lanes, bicycle and pedestrian facilities, and geographic policy areas.** Roadway Design Toolkit for Suburban, Transition, Rural and Joint Land Management Areas As outlined, design of streets with appropriate accommodations for motor vehicles, cyclists, and pedestrians can highly impact the reality of multimodal use and preference along any corridor. In order to achieve the vision of this plan, implementation of design elements that support the vision is essential. This toolkit provides guidance and standards for design of roadway elements, in conjunction with streetscape -related policies in the General Plan. For roadway design specifications in the Urban Policy Area, refer to the Urban Policy Area section of this plan. Roadway Guidelines Vehicular travel lanes are the core elements of roadway design. Most users will at some point use travel lanes, whether in a private vehicle, transportation service vehicle, or transit vehicle to reach a destination. Therefore, several features need to be considered when des igning roads. All roads will need to meet the design standards of VDOT or the County, depending on whether the road will be maintained publically or privately. The following is an overview of guidelines for road design. • Typically, travel lanes should be 12 feet in width. In activity centers and along planned lower speed roadways, narrower lanes should be considered to encourage reduced vehicular travel speeds and shorter crossing distances for pedestrians. • Striping should be provided along both sides of tr avel lanes, and is highly desired when separating through traffic from turning traffic, on-street parking spaces, or on-street bicycle lanes • Local streets should be designed to slow vehicles through contextually-appropriate elements such as narrow widths, tight corner radii, roundabouts, chicanes and islands, traffic controls, intersection tables, raised crosswalks, striping, and heavy landscaping. • A striped buffer area or other barrier meeting VDOT standards between the vehicle lane and bicycle lane is preferred to strengthen the indication of a bicycle lane for drivers and cyclists, and prevent misuse of the bicycle lane for parking or turning vehicles • During public road repaving and restriping projects , provision of on- street bicycle lanes should be evaluated based on this plan and in coordination with VDOT as part of the effort to create a complete and comprehensive bicycling network . Additional o pportunities to maximize multimodal utility along existing roadways should be considered, including striping of on-street parking spaces, center turning lanes, right -sizing travel lanes, and traffic calming. • Along rural area secondary roads, consideration will be given to opportunities to construct bicycle lanes by widening shoulders and adding signage or markings to accommodate bicycles Off-Road Bicycle and Pedestrian Facility Guidelines Due to their physical placement to the side of the travel ways and their relative narrow width compared to the road, off -road facilities for cyclists and pedestrians need to be designed appropriately to accommodate safe and comfortable travel. This includes sufficient sizing, prominence, sightlines, and construction materials to make these facilities dependable and desirable to travelers. The following is an overview of guidelines for off-road facilities. • In the Urban Policy Area, Suburban Policy Area, and JLMAs, sidewalks are to be constructed of an impervious surface such as concrete or asphalt that will permit safe and dependable use in varying weather conditions . In the Transition Policy Area and Rural Policy Area, sidewalks are preferred to be constructed using asphalt in lieu of concrete due to the more natural aesthetic of asphalt. Where an asphalt trail is provided in place of a sidewalk, width standards for a pedestrian sidewalk may be applied. • The following minimum standards will be applied to off -road bicycle and pedestrian facilities, with wider facilities preferred: o Regional Trails – 16 feet o Asphalt Bicycle and Pedestrian Trails along Planned Roadways – 10 feet o Sidewalks along Planned Roadways – 6 feet o Sidewalks along Local Streets – 5 feet • Sidewalks and trails located along public roads will need to be entirely located either within the public right-of-way or within a public access easement. • Connections between bicycle and pedestrian facilities and surrounding neighborhoods should be considered and supported through public and private planning processes, particularly along regional trail corridors including the W&OD Trail. • Bicycle and pedestrian facilities will be designed with consideration for safe travel along and across high speed multilane roadways with consideration of the diversity of user groups who are anticipated to use these facilities. • Bicycle and Pedestrian facilities should feature designs consistent with the natural topography of the area, especially in the transition and rural areas, minimizing impacts to existing natural and manmade features while providing for safe and efficient travel. • Asphalt trails along roadways should be designed to follow the roadway in a direct and efficient manner, meeting AASHTO and VDOT guidelines for vertical and horizontal shifts to ensure useful and accessible bicycling routes Intersection Design Guidelines The integration and connection of transportation facilities provides opportunities for access and mobility as well as the need for route decisions and concerns for traveler safety. To this end, intersections, whether between two roads or a road and an off-road bicycle and pedestrian facility, need to consider multimodal safety and positive design to provide comprehensive opportunities for travel. The following is an overview of guidelines for intersections. • Opportunities for installation of roundabouts should be considered when developing public and private projects as a safer, cost-effective alternative to a traditional signalized or stop- controlled intersection designs. • Right-In / Right -Out intersections, and other modified intersections, will be designed in order to physically prevent non-permitted turning movements. • Pedestrian refuge islands will be provided at crossings of median divided roadways with four or more through travel lanes to shorten individual crossing distances and improve pedestrian safety. • Grade-separated bicycle and pedestrian crossings should be considered for major roads and rivers where anticipated demand or distance to alternative crossing locations may necessitate such an improvement. • Crosswalks should be evaluated and provided across all four legs of signalized intersections, at stop controlled intersections, at roundabouts, and where needed to facilitate safe and efficient bicycle and pedestrian mobility, as well as between opposing curb ramps along two lane roads. • Along primary roads and within villages in the rural area, crosswalks should be provided at pedestrian crossing locations. • Curb ramps will need to be provided at all intersections where crosswalks are planned or anticipated. Amenities and Natural Features Aside from the core transportation facilities, other elements can have significant impact on travel and route preference. Natural features, such as trees, waterways, mountains, and landscaping can improve both the roadside experience and the surrounding vistas. Manmade improvements, such as buildings, public art, or erected barriers can also impact the quality of the journey. To create the best possible travel experience, useful amenities, wayfinding signage, aesthetic improvements, and safety features can be incorporated into the corridor. Additionally , natural features, such as plantings and natural barriers, can be installed to improve the design. The following is an overview of guidelines for amenities and natural features. • Plantings are encouraged along roadways and within roadway medians where feasible. • Consideration will be given to accommodations for public art, place-making elements, and other aesthetic improvements along roadway corridors. • Pedestrian plazas , pocket parks, and seating areas should be considered to provide opportunities for pedestrians to congregate and enjoy outdoor areas. • Provision of bicycle parking for multifamily residential, commercial, and institutional uses, as well as at transit centers, park and ride lots, and other public facilities will help encourage bicycle trips . These should be located in the vicinity of p rimary building entrances to provide safety and convenience for cyclists. • Where noise mitigation or other barriers to access - whether natur al or artificial – are proposed between a major thoroughfare and an adjacent use, it is preferable to locate the shared-use paths and sidewalks on the side of the barrier with access to proposed uses. This will provide for better access to adjacent uses. • Bike route signage should be considered along regional trails and along major cycling corridors following study to ensure the corridors are generally safe for bicycle travel. • Bicycle and pedestrian wayfinding signage will be designed in a context-sensitive manner, matching the existing and planned surrounding aesthetic. • Wayfinding signage should be provided to direct travelers to destinations such as public parks and other tourism areas • Lighting for roads, sidewalks, and trails encourages use and promotes safety. Transit Infrastructure Design Toolkit In order to provide a safe, affordable, convenient, efficient and sustainable multi -modal transportation system to serve the County as outlined in the goals, distinct guidance for transit infrastructure amenities is essential. The following transit toolkit provides guidelines to create a systematic approach for the County and developers to build out a consistent and unified transit system and serves as the County’s policy foundation for the development of transit infrastructure. Stop Placement Guidelines Bus stops are a critical component of the transit system. On a single round trip a bus rider will typically use at least four different bus stops for boarding and alighting, and any one of those stops may create a significant barrier if not designed well. Being able to get to a bus stop easily and wait for the bus in a comfortable environment are important elements of every transit customer’s experience. These bus stop design guideli nes are intended for bus stops used by full -size transit buses on fixed-route service. Location Choice Existing conditions such as roadway type and width, transit service characteristics, and land use affect the way that bus stops should be spaced and designed to ensure comfort, short travel times, and overall network efficiency. Additional considerations that impact the safety, convenience, and accessibility of a stop, such as placement relative to street intersections must also be considered. The following is an overview of several factors that influence the placement of bus stops. • Bus stops should be placed near activity centers, such as shopping areas, civic buildings, schools, medical centers, or residential communities to attract ridership by enhancin g the convenience of transit service. In areas where there are several activity centers in close proximity, such as an area with several popular shopping destinations, bus stop placement should consider additional factors, such as spacing and logical routing. • For major activity generators, such as special event centers, stops should be located as close as possible to the entrance of the destination. • Roadway speed, width, and vertical alignments should be considered when siting and designing a bus stop and stops. A bus stop’s adjoining roadway can impact both design and operation of bus service and stops. For example, wider streets may allow for curb extensions at bus stops, which would create more space for amenities and reduce the pedestrian crossing dista nce. However, wider streets also typically have higher travel speeds, which increase the sight distance needed for pedestrians to feel comfortable crossing the roadway as well as distance needed for drivers to see passengers at the stop as they approach. • Conditions of the sidewalk and connections with the surrounding area are important and affect the prioritization of bus stop improvements. At minimum, a stop should be accessed by a sidewalk in safe and ADA -accessible condition between the bus stop and the closest intersection. • As almost all riders will need to make round trips using a pair of bus stops on opposite sides of a street, safe, nearby crosswalks with curb cuts for wheelchairs, are required. When a stop is intended to serve a singular destinati on, a logical path between that destination and the bus stop shall be provided as well. • Bus stops will be designed with lighting, either as part of the stop or via nearby street lights. Passenger security (real and perceived) can positively or negatively a ffect customer perceptions of the bus stop. Therefore, landscaping, walls, and solid structures should be designed to CPTED (Crime Prevention Through Environmental Design) standards so as not to provide hiding spaces or restrict sight lines for passengers. Bus Stop Zones Determining the proper location of bus stops involves choosing between near -side, far-side and mid-block stops. The location of the stop relative to the intersection is an important consideration. If all other factors were similar, far-side stops would be preferable, since they encourage people to cross behind the bus and not in front. However, there are almost always complicating factors. The size of the bus stop zone — where other vehicle parking is not allowed — varies based on the type of vehicle used. If the County adds articulated buses to its future fleet, 20 feet should be added to the length of all bus stop zones described in stop siting alternative. Additionally, the length of the bus stop zone should be increased by 50 feet per additional bus at locations where multiple buses may stop to board/alight passengers simultaneously. NEAR-SIDE STOP Near-side bus stops are located at the approach to an intersection, allowing passengers to load and unload while the vehicle is stopped at a red light or stop sign. Bus stops located at the near side of the intersection should be placed at least 5’ behind the crosswalk to prevent the bus from straddling the crosswalk while it is stopped to serve the stop. Near-side stops have several advanta ges, depending on various intersection factors. They minimize interference with heavier traffic on the far side of the intersection, provide more convenient access to crosswalks (if existing), allows riders to board and alight simultaneously with the red light, avoids being forced to stop for a red light and then again at the bus stop, and provides space for the bus to “jump” traffic when the traffic signal turns green. However, there are several potential drawbacks to a near -side stop as well, including i ncreased vehicle and control device sightline problems for crossing pedestrians, sightline problems for drivers approaching the intersection, conflicts with passing and right-turning vehicles, blockage of through travel lanes, and disruption of traffic flows. A bus may also find itself stuck on a red light after dropping passengers at the stop during the traffic signal’s green phase. Near-side stops are recommended in locations where: • Vehicular traffic is heavier on the far side of an intersection • Pedestrian facilities are more readily available on the near-side of the intersection • The bus will be turning right at the intersection, where curb extensions protect the bus from turning traffic • Stacking of buses at far-side stops may lead to gridlock within the intersection FAR-SIDE STOP Far-side bus stops are located after an intersection, allowing the bus to travel through the intersection before stopping to load and unload passengers. For a standard 40’ transit bus, the bus stop should be located at least 50’ after the intersection to ensure that the rear of the bus does not extend into the intersection and/or straddle the pedestrian crosswalk. Advantages to far-side stops include minimized potential conflicts with turning vehicles, the ability of buses to take full advantage of the gaps in traffic flow created at signalized intersections behind the stop, additional right -turn capacity by making curb lane available for traffic, longer deceleration distances for buses, smaller area needed for curbside bus zone (when considering space needed to pull in to the stop area), and opportunities for pedestrians to cross behind the bus. The disadvantages to far-side stops include the potential for traffic to queue into the intersection when a bus is stopped in travel lane, obscured sight distance at the far-side crosswalk and for side streets, pedestrian conflicts as the bus approaches the stop while seeking to move past the intersection, and may result in the bus being required to stop at both the red light and the far s ide stop. Far-side stops are recommended in locations where: • Vehicular traffic is heavier on the near-side of an intersection • At heavy right turns on major approach (or where the near side approach includes a right - turn lane), or heavy left and through movements from side street • Existing pedestrian facilities are greater and movements safer than on the near side • At complex intersections with multiphase signals or dual turn lanes, this removes buses from the area of complicated traffic movements • Intersections that have transit signal priority or queue jump lanes MID-BLOCK STOP Midblock bus stops are located between intersections. Mid-block stops should generally only be used under special circumstances, such as where major trip generators/attractors justify high- volume access and that generator/attractor cannot be served at the nearest intersection, or when the distance between adjacent intersections exceeds stop spacing recommendations and a midblock crossing is available for use. Midblock stops, while generally not preferred, provide some advantages, including the likelihood of less pedestrian congestion near customer waiting areas, improved sightlines for pedestrians and vehicles, and limited conflicts with traffic flows. However, the drawbacks of mid- block stops include the need for more significant on-street space for the bus to pull in and out of the stop zone, increased potential for unsafe midblock crossings, and increased walking distance to nearby intersections and associated destinations. Therefore, midblock crossing should only be considered under limited circumstances where: • Traffic or street/sidewalk conditions at the intersection are not conducive to a near or far - side stop • Customer traffic generators are located mid-block and/or adjacent intersections are too far apart • A queue jump lane conflicts with a potential near side or a far-side stop Bus Stop Spacing Stop spacing refers to the distance between bus stops along a route. Stop spacing affects overall travel time and, therefore, demand for transit. In general, the tradeoff is between close stops, which result in short walking distances but more frequent stops and longer bus trips, and stops farther apart, which result in longer walking distances but less frequent stops, higher speeds, more reliable bus service, and a shorter bus trip. • Generally, a distance of about 1,000 feet between bus stops is recommended while up to 1,300 feet may be more appropriate for low density areas. This distance is a reasonable balance of the conflicting goals. H owever, finding suitable sites for bus stops may necessitate altering the spacing significantly. In addition, there may be reasons for bus stops to be closer together, such as major transfer points and/or activity centers. And there may be places where bus stops should be further apart, particularly if there would be not be any boarding or alighting anticipated based upon adjacent land uses. In high density areas, such as the Urban Policy Area, stops along a route should occur generally no less than once every 3,000 feet. • Whenever possible, bus stop locations should be paired, so that people are able to board and alight on opposite sides of the same roadway in the same vicinity when making a round trip. This allows the transit service to be more intuitive, a nd maximizes convenience for the greatest number of users. In many cases, there are certain existing or planned locations for bus stops which stand out as particularly important. This can be due to existing use, activity centers, transfer opportunities, or other conditions. Once these critical locations are determined, the remaining stops can be planned for optimal spacing. • At locations where transfer activity between routes is heavy, bus stops for the intersecting routes should be located as close to each other as possible in order to shorten travel for passengers traveling between routes. Additionally, stops with high transfer activity should have a high level of passenger amenities since transferring passengers have less control over the amount of time they wait at the bus stop for a transfer. Loading Area Type On-street bus stops each include a stop zone which may be located in a travel lane, a parking lane, or along the shoulder depending on the characteristics of the roadway. Although on‐ street bus stops are the most common and the easiest to establish, each location has site constraints that should be considered when evaluating a location for an on‐street stop. • Posted speed limits should not exceed 40 miles per hour. • Parked cars must not block bus access to acceleration/deceleration areas or the curb, rendering the stop inaccessible to customers who use wheelchairs. Alternative configurations such as curb extensions, and bus bays may address some of these issues while accomplishing other service goals. • CURBSIDE STOPS The most common stop location, these are designed for the bus to pull up along the existing curb edge to board and alight passengers. When installing amenities at these locations, such as seating or a shelter, it is preferable to locate the amenities betwe en the sidewalk and street edge so that riders waiting for a bus are not required to cross the sidewalk to reach the curb. These stop locations placed at least 60 feet from the edge of the curb radius of the nearest intersection to ensure safe boarding and alighting for transit riders and safe turning movements for vehicular traffic. • CURB EXTENSIONS A curb extension, also known as a bulb- out, is a widening of the sidewalk to extend the bus stop loading and waiting area into the parking lane, bring it direc tly adjacent to the travel lane. Curb extensions are most effective in denser environments with high pedestrian activity or areas where the sidewalk is too narrow to accommodate a bus stop. In these locations, curb extensions provide a larger bus stop foot print that can accommodate shelters, benches, and other transit customer improvements while reducing interference with pedestrian activity on the sidewalk. Curb extensions also reduce the need to displace parking spaces since a bus serving a stop on a curb extension will stop in the traffic lane instead of traveling into the parking lane as they do at curbside bus stops. Finally, curb extensions work well in conjunction with crosswalks by reducing the crossing distance for pedestrians. Curb extensions should be considered at sites with the following characteristics: High pedestrian activity Crowded and/or narrow sidewalks A need to reduce pedestrian crossing distances Bus already stops in travel lane The need to minimize loss of street parking There are multiple travel lanes, enabling vehicles to bypass a stopped bus Since a bus serving a stop on a curb extension will now stop in the traffic lane instead of traveling into the parking lane, a shorter bus stop length (50-feet) is required. Stops located along a curb extension should be designed to the following minimum dimensions: 50-foot bus stop length (70-foot bus stop length for stops served by articulated buses) 5-foot by 8-foot concrete landing pad 4-foot by 10-foot rear door clear zone BUS BAYS A bus bay is a stop with a pull-out for buses that is constructed as an inset into the curb. The bus bay allows buses to pull out of traffic for loading and unloading, allowing general traffic to pass the loading bus. Bus bays are most effective in areas where the impact of a bus blocking a travel lane creates significant traffic delays, where traffic speeds are more than 40 MPH, or where long dwell times are common. In these locations, bus bays allow buses to service the stop while minimizing traffic delays and conflicts with traffic. Bus bays also clearly define the bus stop and allow customer loading and unloading to be conducted in a more relaxed manner. However, bus bays can also make it difficult for buses to reenter traffic, which can increase bus delays, decrease service reliability, and increase average bus travel time. Bus bays may also require right-of-way acquisition. Additionally, bus bays may reduce sidewalk width and impact pedestrian traffic if sufficient right-of-way is not available. Bus bays should be considered where street traffic averages 40 mph or more and any of the following conditions exist: • Average peak period dwell time exceeds 30 seconds per bus • There is a high frequency of collisions involving buses and/or pedestrians • Bus volumes exceed 10 or more buses per hour • Where stops in the curb lane are prohibited • Where sight distances prevent traffic from stopping safely behind a stopped bus • At stops where there are frequent wheelchair passengers boarding • Where buses are expected to layover at the end of a trip Bus stops located along bus bays require slightly different footprints than typical curbside bus stops. Since a bus serving a stop in a bay will pull out of the general traffic lane into a curved pull- out lane, a shorter bus stop length (60’) is required, as the bus will use the curved pull-out lane for its approach. Stops located in a bus bay should be designed to the following minimum dimensions: • 60-foot bus stop length • 5-foot by 8-foot concrete landing pad • 4-foot by 10-foot rear door clear zone Bus Stop Elements and Amenities Well-designed bus stops enhance the rider experience, decrease perceptions of extended wait times for transit services, and can contribute to increased ridership. Conversely, poorly designed bus stops can decrease customer satisfaction, make transit less attractive to potential new customers, and potentially make waiting at stops unsafe and uncomfortable for riders. Investing in high quality bus stops is often a low-cost, high-reward strategy for improving transit operations. Developing clear and practical guidelines for amenities at bus stops can provide the structure and process needed to improve overall transit system quality. No matter how many riders use a bus stop on a given day, each stop requires certain key design elements to be safe, accessible, reliable, and comfortable for passengers. By formalizing the amenity installation process, the County can set clear goals for stop quality and provide justification for how and when bus stop upgrades occur. Bus stop amenities are profiled below. BUS STOP SIGN Bus stops should all include consistently updated and attractive signage conveying essential information to increase customer satisfaction and understanding of the bus system. • Basic information includes route numbers and names, stop ID number, the direction of the routes, a phone number and website for additional assistance, and often destination(s) and service hours. A stop ID number is often used to access real -time schedule information via text message, internet, or an automated phone system. These details help to reduce confusion and increase rider comfort at stops. • All bus stops should have a consistently maintained bus stop sign on the far side of the boarding area and be placed on a pole at a height that conforms to ADA standards while avoiding impacts to pedestrian movement on the sidewalk. SEATING Benches can be either freestanding or part of a shelter design and provide seating for passengers waiting for the bus or ne ar sites that attract riders who may have difficulty walking and standing. • Seating should be provided wherever possible and designed so as not to compromise safety or obstruct sidewalk access or access to customer information. • Benches should be fabricated of durable materials resistant to vandalism and weather conditions. LIGHTING Adequate lighting at bus stop facilities allows bus drivers and approaching traffic to see waiting passengers at night. Lighting also provides added security for those waiting at the stop, in addition to illuminating route and schedule information for patrons. • Lighting can be provided by a nearby streetlight, lighting installed within the shelter, or a stand‐alone light pole. Transit stops should either be located within 30 feet of an overhead street light or include lighting within the shelter. • Lights installed within the shelter should be designed with appropriate brightness to provide visibility, while not being so bright as to create a spotlight effect that makes it difficult for waiting passengers to see outside. SHELTER Shelters offer a prominent and safe protective waiting area for bus passengers, traditionally including informational signage about the bus service or surrounding land uses. Shelters protect transit ride rs from the elements and help to identify stop locations by defining a sense of place along a roadway or at a transit center. Numerous suppliers provide off - the-shelf bus stop shelter designs. The County also has a standard design, which may be updated from time to time. This is a minimum standard and can be provided by DTCI upon request. • Shelters should include at least two walls, a roof, seating, and a clear space for customers using a wheelchair. • Bus shelters should provide a clear line of sight to approaching buses. Many shelter designs incorporate glass or plastic walls in order to provide multiple lines of sight. • Bus shelters shall be a minimum of 16- feet in width in the Urban Policy Area and a minimum of 12- feet in width elsewhere in the County . At existing or planned transfer points, at stop locations central to activity centers, and at locations where high ridership is anticipated, a minimum of 16 -feet in width shall be required. All bus shelters will be designed to include lighting, which may b e on a motion detector or timer, and shall be solar-powered as feasible. WASTE AND RECYCLING Bus stops, both those with and without shelters, can offer both trash and recycling receptacles to help keep the stop area free of debris, food scraps, or other refuse generated by waiting bus passengers on a daily basis. • Receptacles should be durable, visible, and placed conveniently without blocking major pedestrian movements. • Bus stops that have a problem with litter and those in proximity to fast food establishments should have trash receptacles. • Receptacles should be of a standard type, closed at the top to prevent rain, snow, or other precipitation from entering, and easy for maintenance workers to access and empty. • Maintenance may be completed through a private maintenance agreement. Design should be consistent for easy identification by travelers, but receptacles can be customized with artwork or advertising specific to stop locations. BICYCLE PARKING Permanently and individually installed bicycle racks provide an opportunity for bus passengers arriving by bicycle to securely park their bike during the length of their bus trip. Groups of bicycle racks may be covered and secured in lockers or a shelter with gated access to provide an additional benefit to long-term bicycle parkers by protecting bicycles and related gear from weather or theft. • Bicycle parking should be provided at all park -and-ride lots and at transfer stations. • Lockers should be clearly labeled as bicycle parking and signs should be posted with directions for use. Larger bicycle parking stations can have vertical hanging racks and typically require a unique maintenance plan and are often operated as a concession or contract service. • Sufficient spacing between racks enables a comfortable and intended fit of two bicycles to each rack. To be consistent with the Association of Pedestrian and Bicycle Professionals (APBP) Bicycle Parking Guidelines, racks aligned parallel to each other should be at least 36 inches apart. Those aligned end-to-end should be 96-inches apart. Racks perpendicular to a wall must be at least 48 -inches from the wall and at least 48 -inches from the curb. Racks parallel to a wall should be at least 36-inches from the wall and 24-inches from the curb. Additional Amenities The following amenities will be considered as part of bus stop design but are not anticipated at all stop locations at this time: REAL TIME INFORMATION DISPLAYS An electronic display at bus stops showing the number of minutes until the next arrival of each operating bus route at that very stop can help improve the passenger experience. Especially at stops where bus route frequencies are less than every 10- 15 minutes, knowledge of how long a passenger must wait until the next bus is important for rider comfort. OFFBOARD FARE VENDING EQUIPMENT At major bus stops and transfer stations, the installation of fare payment/purchase equipment at bus stops can improve customer convenience and service reliability by reducing on-board cash transactions and bus stop dwell times. Off-board fare payment vending machines and associated instructional signage typically require a 10’ by 10’ footprint for two machines and should be semi-enclosed. The potential need for wired connections for power or communications can restrict the number of potential deployment sites PUBLICATION VENDING Newspaper boxes and other literature vending machines can be an added convenience to passengers and should be placed at locations where there is a high level of pedestrian activity or bus ridership. Corrals can be used to designate a location for newspaper boxes. As with other bus stop elements, boxes should not obstruct pedestrian movement and should comply with ADA requirements. SECURITY CAMERAS Bus stops and transit centers see large numbers of users each day, not always under employee supervision. A security surveillance system both on- board buses and at select facilities can help to ensure a safe and secure environment for customers and employees alike. Video surveillance also allows the transit operator to monitor facilities remotely at any time of the day and may have operational benefits from an arrival/departure/loading time perspective. Bus Stop Hierarchy Resources for providing and improving passenger facilities must be prioritized in terms of what improvements will be made and where they will be applied. The table below provides a guide for the provision of the previously described bus stop elements for each class of bus stop. Conceptual Ideas of Basic, Enhanced, and Transit Center Bus Stops Note that the Park & Ride is not in and of itself a typology. The bus stop located proximate to any size parking facility may be configured as a basic stop, an enhanced stop, or a transit center, although anticipated high ridership at these locations are more likely to lend themselves to the Transit Center category. Considerations on the choice of stop class should consider total daily trips, number and type of routes serving the stop, and any the customer based served. Bus Stop Element Basic Stop Enhanced Stop Transit Center Bus Stop Sign Yes Yes Yes Seating Yes Yes Yes Lighting Yes Yes Yes Shelter No Yes Yes Waste and Recycling No Yes Yes Bicycle Parking No Optional Yes Real-Time Information No No Yes Fare Vending Equipment No No Optional Literature Vending No No Optional Security Cameras No No Optional Operational Network Features/Improvements In addition to stops, there are improvements that can be made to the transit system through management of travel lanes along identified transit corridors. These improvements attempt to prioritize transit as a more efficient way to move more people through a transportation corridor, understanding the people trips as being different than the traditional vehicle trips metric. DEDICATED TRANSIT LANES Dedicated transit lanes are used to prioritize and improve frequent bus services on busy streets. Owing to the high passenger capacity of transit, a dedicated transit lane can drastically increase the amount of people that can be transported along a corridor during the highest demand travel periods. Since dedicated transit lanes encourage people to shift to transit, reducing vehicle demand, they are an important part of maximizing the utility of the transportation system by making travel faster, more reliable, and more enjoyable. Pavement markings, signage, and enforcement are important to maintain the integrity of dedicated lanes. Dedicated lanes can be located along the curb, which work best on streets with a parking lane that can be designated as no parking during peak travel hours, few driveways, and limited right-turning traffic. They can also be located within the median, operating in full -time dedicated lanes with median islands for boarding. For short connections, they can use transit plazas that prohibit other vehicle traffic and reserve the entire right of way for buses. Transit lanes are used only on corridors where transit service is very frequent, ridership is high, and traffic congestion significantly and routinely impedes transit operations. Transit lanes may be permanent or time restricted —reserved for transit vehicles only at peak hours of the day and permitted for other uses at other times. Transit lanes may also be considered for future implementation where planned densities may result in the need for such facilities in the future. Example of Dedicated Transit Lanes SHARED TRANSIT LANES A shared lane reserved for transit vehicles and bicyclists can provide improved accommodation for both road users to maneuver together as transit vehicles start and stop along a corridor. Shared lanes are appropriate on streets where bus headways are at most every five minutes, traffic speeds are less than 30 -miles per hour, bike volumes are not very high, and space constraints preclude exclusive facilities for each mode. The shared lane is typically wider than a dedicated transit lane. They should be located in the outermost lane adjacent to a curb to reduce conflict. Example of Shared Transit Lanes BUS QUEUE JUMP LANES • A short bus lane located at the approach to a traffic signal allows buses to bypass waiting traffic, significantly improving transit travel time. They are best used at congested intersections on primary transit routes and where stops can be placed at the far -side of an intersection. Space on the far side of an intersection should exist for the bus to reenter traffic. Bus queue jumps may be: • Transit Exemption for Right-Turn Lanes: The bus queue jump lane shares space with a right-turn lane, but transit vehicles are allowed to proceed straight through the intersection. • Shared Right-Turn/Bus Lane: The entire curbside lane is reserved for transit vehicles, but drivers are allowed to enter the lane when approaching an intersection for right turns. • Advanced Stop Bar: The main stop bar is pushed back several car lengths and a trans it- only or “right and transit” lane is placed along the curb at least two car lengths ahead of the stop line, so that transit vehicle can pull ahead of other traffic. Example of Bus Queue Jump Lanes Maximum Allowable Walkshed Mode Shifts for Site Analysis When evaluating the breakdown of transit trip generation, realistic assumptions should be made by considering the type of available transit service nearby, the frequency of the service, the distance to the service area, and the uses proposed. Mode shifts to transit may not exceed the following rates subject urban orientation of the proposed use and the allowable mode shift rates described below: Transit Inner Core (Generally ¼ Mile or less from a Transit Center) 40% Rapid Transit | 25% Local Transit Transit Outer Core (Generally ¼ Mile to ½ Mile from a Transit Center) 20% Rapid Transit | 10% Local Transit Transit-Supportive Area (Generally ½ Mile to 1 Mile from a Transit Center) 5% Rapid Transit | 0% Local Transit (These may be applied at the weighted rates for proposed developments as described below based upon walkshed and transit service in the vicinity). Retail Uses 100% of the allowable walkshed mode shift for all pedestrian-oriented retail uses. Reductions may not be applied for any auto-oriented retail use, including drive-through restaurants, drive-through banks, drive-through pharmacies, car washes, gas stations, automobile service stations, or convenience stores (if fronted by gas pumps). Commercial (Non-Retail) Uses 100% of the walkshed reduction for office uses, artistic studios, educational institutions, research and development campuses, and technology campuses. Reductions may not be applied for any auto-oriented or industrial/manufacturing use such as warehouses, data centers, vehicle rental businesses, manufacturing, breweries (non-retail), and moving/shipping/storage businesses, including any related office components. Residential Uses 100% for the allowable walkshed mode shift for multi-family residential units under 1,500 SF and urban single-family attached residential units under 1,800 SF; 80% for multi- family residential units over 1,500 SF and urban single-family attached residential units between 1,800 SF and 2,400 SF; 50% for single-family attached residential units over 2,400 SF and all single-family detached residential units. Chapter 4 – The Built Environment – Transportation and Land Use Our collective desire to travel and explore is generated by our interest not in the journey, but the destination. Without places to go, be they homes, businesses, schools, entertainment venues, or recreational options, there would be no need for roads. The refore, the demand for mobility and access is dependent on the built environment, and he built environment has a substantial impact on how the transportation system operates. Distances between uses, connectivity and integration of places, building design, and environmental features can all impact how the traveling public perceives a particular location. Addition, alteration, or removal of a seemingly trivial structure or other feature, such as landscaping, signage, entryways, or windows may deeply impact th e way people feel about their safety and security in that areas, as well as about the aesthetic quality of the environment. If places are the reason people travel at all, the spaces between the places can impact experiences just as significantly. Low speed roads may deter drivers, while high speed roads may deter cyclists and pedestrians. Narrow, winding two-lane roads may fit perfectly in a rural environment, but feel out of place and insufficient in a suburban environment. The transportation network conn ects people to places within every part of Loudoun County, but to achieve planned connections while supporting the goals and intended outcomes of the entire Comprehensive Plan, the context of the built environment must be of paramount consideration. Theref ore, design of the transportation system must consider not only facilities needs but appropriate design for the surrounding planned environment. This chapter provides policies to support the creation of a comprehensively multimodal transportation system th at accommodates all transportation modes with strong consideration of enhancement opportunities in the Urban and Suburban Policy Areas, creation a visual transition in the Transition Policy Area, preservation of the landscape in the Rural Policy Area, and coordination and integration with Towns through the Joint Land Management Areas. To accommodate travel options along every route to incorporate the needs of different users within these differing contexts, this plan incorporates roads, sidewalks, bike lanes, asphalt trails, and transit infrastructure policies to ensure that multimodal connectivity can be realized. Effective implementation of a context-sensitive multimodal transportation system requires implementation of several key planning principles to ensure that facilities are designed to fit the natural and built environment in which they currently or are planned to exist. These principles include: 1. The development of local and regional street connections providing redundant routes and multiple access options appropriate based upon the existing and planned environment. 2. Human-scaled connections to ensure that every system user has logical routes throughout the area. 3. Design of roadways that accommodate drivers, cyclists, and pedestrians. 4. Amenities that encourage and provide adequate access to all travelers. The following sections provide a framework for context-sensitive transportation system design for the Urban, Suburban, Transition, and Rural Policy Areas, as well as for the Towns and Joint Land Management Areas. Urban Policy Area The Urban Policy Area transportation network focuses on the concept of choices. If a transportation network is designed appropriately, no resident, worker, or visitor to the area is limited to a single transportation mode in or der to travel, allowing for choice depending on distance, weather conditions, trip purpose, or personal preference. For others, such as those who are too young to drive, those who do not feel comfortable driving, those who cannot afford a personal vehicle, or those who are unable to drive, multimodal systems provide safe and dependable travel options to ensure convenient access to goods, services, employment opportunities and entertainment. Creating a Multimodal System The Urban Policy Area plan and policies are critical because development of a multimodal system cannot happen haphazardly or through piecemeal efforts. Just as a comprehensive street network is necessary to allow cars and traffic to move efficiently, so are the networks intended for transit riders, cyclists, and pedestrians necessary to encourage people to take advantages of these different mode choices. This is comparable to a two-lane road with stop signs every block that intentionally slows traffic, and is therefore not as preferable to drivers as a freeway. Transit, automobile, bicycle, and pedestrian networks that account for the mobility needs of these different modal users are required for each mode choice to be viable. • For Automobiles, this means ensuring development of a system of higher-capacity roadways in order to move traffic through and into the area. • For Transit Riders, this means identifying and building streets that feature elements to support premium transit services, including frequent but practically-spaced transit stops, to allow for direct routing and high-frequency transit services that provide logical connections throughout the County and to the rest of the region via Metrorail. • For Cyclists, this means ensuring development of on- street bicycle lanes into a network that serves bicycle commuters by providing higher speed, traffic -signal controlled routes through the Urban Policy Area. Meanwhile, this also means developing a comprehensive on- and off-road trail network that serves recreational cyclists. • For Pedestrians, this means completing a sidewalk system that provides continuous routes along both sides of every street in the corridor for maximum mobility and access. It further means providing sidewalks that are free of bicycles, delivery loading and unloading, and limits the frequency of driveways to provide limited interruptions and conflict points in the pedestrian network. Urban Policy Area – Built Environment General policies for these facilities are outlined below. Chapter 3 of the Countywide Transportation Plan provides specific descriptions of the street section typology for each roadway identified in the plan. Along planned limited access roadways, trail systems along parallel roadways have been incorporated into the plan to provide non-motorized access in these corridors. Urban Area Built Environment Policies 4-1.1 Multimodal Design Every street within the Urban Policy Area will include design elements for vehicles, pedestrians, and bicycles to ensure multimodality. These elem ents should incorporate all prominent modes, including: • Bicycling through on-street bike lanes, trails, and shared travel lanes • Walking through sidewalks and jogging paths • Driving and Riding Transit through innovative street designs • Modal Transfers through bicycle parking, transit shelters, and transit stations 4-1.2 Block Size Small urban block sizes are a critical component to maximizing access and walkability. Development in the Urban Policy Area will provide connected internal streets (including Local Streets, Avenues, Boulevards, and Multimodal Through Corridors) placed at an interval of no more 660 feet (1/8 th mile). This interval is not inclusive of alleyways or service roads. Exceptions for interruptions to the street grid, resulting in a Superblock (a block larger than 660 feet by 660 feet), shall be allowed where necessary to provide for public parks, public facilities, cultural institutions, or other uses deemed appropriate by the County requiring a large uninterrupted swath of land, or where natural and fixed manmade features (e.g., floodplains, bridges, utility substations) would not permit development of an optimally-connected network. Where feasible, pedestrian connections through this Superblock shall be provided to ensure ample pedestrian connectivity. 4-1.3 Off-Street Parking Areas Parking lots should be oriented to the rear of buildings to ensure safe and convenient access to Boulevards and Avenues for pedestrians and cyclists in order that conflicts with vehicle drive aisles are reasonably minimized. 4-1.4 Inter-parcel Connectivity New, expanded, or significantly renovated development plans will seek to maximize the number of logical street connections to adjacent properties and to CTP roadways for all modes so that seamless connectivity can be achieved between developments. Development proposals in the Urban Policy Area shall provide for or reserve inter-parcel connections meeting the block criteria above to both undeveloped and underdeveloped adjacent sites so that future developments may connect seamlessly into the proposed development in accordance with land use policies of this plan. 4-1.5 Landscaped Buffers The buffer area between sidewalks and roadways is an important element of transportation system design. Buffer widths should depend on the speed of a roadway and the character of the surrounding development and will conform to VDOT Design Guidelines. 4-1.6 Street and Driveway Alignments As feasible, streets and driveways shall be constructed to align with existing streets and driveways in order to facilita te development of a grid of streets. 4-1.7 Connectivity Land development applications will include connected and unified road, bicycle, and pedestrian networks where feasible in order to promote connectivity within a development and between neighboring developments. 4-1.8 Public Roads Internal roads within a development site shall be public, unless meeting the definition of alleys or service roads. Public Roads shall be designed to meet the standards of VDOT Road Design Manual Appendix B (2) and DRPT Multimodal System Design Guidelines. 4-1.9 Meeting the Intent of the Typology Development applicants will define how the proposed roadways within the proposed development meet the intent of either a commuter route, commercial mixed -use street, residential street, or industrial s treet, and demonstrate compliance with the policies and sections for each roadway. 4-1.10 Pedestrian Corridors All Multimodal Through Corridors, Boulevards, and Avenues shown in this plan shall be considered pedestrian corridors. In order to maintain the integrity of these corridors, service uses such as loading docks and trash collection should face service driveways internal to the site. Service driveways and parking lots shall not be placed immediately parallel to pedestrian corridors, unless it can be demon strated that the proposed layout enhances or complements the pedestrian streetscape. 4-1.11 Planned Roadways, Sidewalks, and Trails Any roadway or trail indicated within this plan shall be constructed in the location shown on this plan as described in this pl an, whether built by the County or as part of a land development application. 4-1.12 Plan Coordination Transportation Improvements in the Urban Policy Area will meet the policies and intent of this document as well as other policies of the Comprehensive Plan. Urban Policy Area Roadway Network The transportation network established herein seeks to meet all of the objectives described above, creating a regional grid to facilitate the development of an urban grid of local streets throughout. Corridors run generally east -west or north- south, providing multiple redundant travel ways through the area. This allows traffic to divide onto parallel roads, similar to the County’s transportation system plan for other parts of the County. This plan also includes several new components in regard to transportation. Roads are more specifically defined to ensure coordination with all modes. This allows for creation of a network that serves drivers, cyclists, walkers, and transit riders all within the same system. This network allows developments to retain and cre ate their own identities, while ensuring that development can be designed to fit seamlessly into the greater network. This network features high- speed highways and low -speed local streets, recognizing the importance of each type of roadway in the overall network, and integrates access to Metrorail as a key component of the overall concept. The Urban Policy Area road network provides ample mobility and access for drivers, transit users, cyclists, and pedestrians, regardless of age or ability. The transportation network provides for true mode choice, ensuring that users are not limited in the options, whether they choose to drive a personal vehicle, ride transit, ride a bicycle, or walk. The Urban Policy Area transportation network facilitates the development of the envisioned high-density urban environment detailed within this plan, and improves and increases connectivity to places throughout Northern Virginia and the region for people throughout Loudoun County. In a suburban roadway network, grid c onnectivity is replaced by funneling traffic onto arterial roadways. Traffic in a traditional suburban subdivisions travel along local roads, funneling to one or two entrances along collector roads. From there, traffic funnels from the collector onto an arterial with traffic from other subdivisions. This system therefore requires wide collector roads and even wider arterial roads to act as the ribs and spine of the network, respectively. An urban network, comparatively, has several sets of ribs and spines, more evenly dispersing traffic through the network and allowing for more direct travel routes. Urban multimodal streets feature many elements already found in Loudoun County. In the Urban Policy Area, these elements include: • Parallel Roads With redundant travel options, multiple routes allow travelers to disperse more evenly and efficiently throughout the system. • Frequent Intersections Long blocks limit pedestrian access and opportunities to reach key corridors. Human-scaled block sizes ensure greater mobility for all system users. • Crosswalks and Midblock Crossings While traveling an additional ¼ mile during a trip may be nearly imperceptible when driving, pedestrians travel approximately three miles per hour. This means that if someone wants to get across the street and the nearest crossing is ¼ mile in either direction, that person has to travel an additional 10 minutes simply to complete this crossing. Therefore, frequent and well -marked crosswalks make a substantial difference for pedestrians. Along main streets, midblock crossings should also be considered for additional convenience. • Sidewalks Wide sidewalks facilitate pedestrian activity and make streets welcoming to pedestrians. On slower streets, sidewalks may be built adjacent to the curb, while on higher-speed roadways, a buffer area may be appropriate. • Bike Lanes These striped bike-only zones create a safe and dependable route for cyclists, not blocked by pedestrians and not sharing the travel lane with cars. They encourage bicycle commutes and increase comfort for cyclists and drivers. • Transit Shelters Enhanced transit shelters are critical in making transit a choice mode during the heat of the summer, cold of the winter, and in the evening. These shelters can include information such as sche dules, live next bus screens, and provide access for all users, including those with physical disabilities. By placing shelters between the sidewalk and the street, transit users can move seamlessly from the shelter onto the bus without conflicting with pedestrians or being exposed to the elements. DRPT Definitions and Concepts In 2013, the Virginia Department of Rail and Public Transportation (DRPT) released the Multimodal System Design Guidelines, which provide a transportation system design manual alternative to the Virginia Department of Transportation’s (VDOT) Road Design Manual. In order to permit these guidelines to be applied in certain areas, VDOT amended its Road Design Manual in 2014, adding Appendix B (2), which includes guidelines for implement ation of the DRPT standards within a designated urban area. In order to facilitate the County’s visions of the Urban Policy Area as an urban, multimodal center, the County has incorporated these guidelines into the plans within this document. Streets within the Urban Policy Area will be identified by a hierarchy as defined by the Virginia Department of Rail and Public Transportation. Descriptions of roadway typologies as defined in the DRPT Multimodal System Design Guidelines are provided below: Multimodal Through Corridor The Multimodal Through Corridor (MTC) is a higher speed corridor that connects multiple activity centers. It is intended for longer distance, higher speed automobile, bus, or rail travel and ideally has limited at-grade intersections with other roadway types. MTCs are good candidates for high speed commuter transit having few impediments to traffic flow. Higher speeds limit pedestrian and bicycle modes and hence the corridor design should provide separated facilities for these modes if th ey are needed. The design of the adjacent buildings should be oriented away from MTCs and towards place- making corridors on the other side of the buildings, providing more desirable pedestrian facilities and pedestrian -oriented land uses on the place- making corridors, while still accommodating pedestrian travel along the MTCs. Design speeds for MTCs range from 35 to 55 mph. Transit Boulevard The Transit Boulevard is the highest capacity and most transit supportive Multimodal Corridor in the typology. It would typically only be found in dense urban centers that have sufficient density and market for premium transit. A Transit Boulevard is a multi- lane and multimodal boulevard with a dedicated lane or right-of-way for transit. Transit technologies could be bus service with a bus only lane (BRT or express bus), light rail, or other transit technologies with a separate right- of-way. Other transit types that share lanes with general traffic, such as streetcar or local bus service, could be accommodated on a Boulevard, Major Avenue, or Avenue, but the dedicated transit-only right-of-way defines the Transit Boulevard corridor type. Design speeds for Transit Boulevards range from 30 to 35 mph. Boulevard A Boulevard is the corridor type of highest multimodal capacit y that accommodates multiple motorized and non- motorized modes. Boulevards allow for higher traffic volumes and greater efficiency of vehicular movements than Major Avenues, Avenues, and Local Streets, and typically have four to six lanes of traffic but may be up to eight lanes in particularly dense centers, such as Tysons (in Fairfax County). Boulevards provide safe and convenient pedestrian and bicycle access to adjacent land uses. Boulevards feature a median, landscaped amenity elements, street trees, and wider sidewalks. Design speeds for Boulevards range from 30 to 35 mph. Major Avenue Major Avenues contain the highest density of destinations, intensity of activity, and mix of modes. Because of the close proximity of destinations, pedestrians and stree t activity are common on Major Avenues. Major Avenues have wide sidewalks to accommodate high numbers of pedestrians and a variety of outdoor activities, including sidewalk cafes, kiosks, vendors, and other street activities. Major Avenues can be areas of high transit ridership for local bus routes. Traffic is low speed and localized. Due to the intensity of destinations, longer regional trips do not use Major Avenues; rather such trips would typically utilize Boulevards or Multimodal Through Corridors. Autos and buses on Major Avenues travel at slow speeds because pedestrian crossings and on-road bicyclists are frequent. Major Avenues typically have four or fewer lanes for motor vehicle travel while providing adequate facilities for bicycling and typically providing roadway space dedicated to on-street parking. Design speeds for Major Avenues range from 30 to 35 mph. Avenue Avenues provide a balance between access to the businesses and residences that front upon them and the collection of vehicular and pedestrian traffic. While having fewer destinations than Major Avenues, pedestrian and bicycle activity is very common, as Avenues serve as critical links in the non-motorized network. Avenues are low speed roadways that facilitate shorter trips, but still contain a fair amount of destinations. Avenues typically have three travel lanes or fewer, and do not exceed four lanes. Avenues may have roadway space dedicated for on -street parking and provide adequate bicycle facilities. Avenues have a 25-30 mph design speed. Local Street Local Streets see the lowest amount of activity and have the slowest speeds and the highest access. Bicyclists typically can share the road with autos, because speeds are slow and auto traffic is sparse, although they have separate side walks and trails for pedestrian accommodation. Local Streets are primarily in more residential areas and are intended to serve only trips that originate or end along them. They connect to Avenues, Boulevards or Major Avenues, funneling longer trips to these higher capacity corridor types. Local Streets are characterized by slow design speeds, wider setbacks; they may not have lane striping and emphasize on- street parking. Local Streets have a 25 mph design speed. Roadway Features Good design for the multimodal transportation system in the Urban Policy Area needs to integrate all of the modal demands outlined above. Therefore, consideration of design standards, traffic controls, roundabouts, and other traffic operations and traffic calming measures must be considered in relation to their impacts to each of the modes desired along the corridor. The decisions made in pursuit of these goals will impact traffic patterns, development potential and design, and mode splits for the transportation system through the area. While it is commonly understood that the number of travel lanes on a roadway determines roadway capacity, the width of those lanes can have a significant impact as well. Lane width impacts travel speed, and pedestrian crossi ng distance. For example, on a four -lane median-divided roadway, suburban standards can call for the two -lane section in each direction to be 27 feet from curb to curb, exclusive of turn lanes. Comparatively, in a more urban environment, that width could be limited to 22 feet. While this difference may seem minimal to drivers, it can make a significant difference for pedestrians. On-street parking is another factor that can help drivers find parking easily and can slow traffic, make drivers more aware of bi cyclists, and protect pedestrians. This is because the cars parked next to the roadway make drivers in the right -lane more cognizant of the potential for movement on their right side, thereby making them more aware of bicyclists. Further, it provides a phy sical barrier between the roadway and the sidewalk, separating pedestrians from vehicle traffic. Multimodal streets can serve the needs of drivers, transit uses, cyclists, and walkers all at the same time. The pictures below demonstrate designs conducive t o a multimodal environment, such as pedestrian refuges at wide crossings that provide pedestrians a safe place to wait if they cannot make it all the way across the street, and peak hour bus/HOV lanes can encourage transit ridership and carpooling when congestion is heaviest, removing single -occupancy vehicle trips from the road. Meanwhile, in order to protect the pedestrian- oriented character of local streets, traffic calming measures integrated into street design, such as roundabouts, road diets, chicanes , and raised crosswalks can create an environment where traffic feels the need to travel at slower speeds. These are preferable to other types of retrofits, such as speed bumps, median dividers, and retrofitted cul-de-sacs, which breakup neighborhoods and reduce accessibility and mobility. Roadway System Policies 4-1.13 DRPT Implementation All roadways within the Urban Policy Area will be built or redesigned in accordance with VDOT Road Design Manual Appendix B (2) and DRPT Multimodal System Design Guideline standards and policies and descriptions provided in this plan. Streets internal to a development site should be classified as local secondary roads (VDOT Functional Classification) and local streets (DRPT Multimodal System Classification). 4-1.14 Design to Meet the Typology Based upon the DRPT Multimodal System Design Guidelines, roadways within the Urban Policy Area will be defined according to the DRPT Multimodal System Classification. The descriptions provided below are derived from the DRPT Multimodal System Design Guidelines as they are intended to be applied within the Urban Policy Area: 4-1.15 Grid of Streets Streets within the Urban Policy Area will be developed in a grid pattern corresponding to the alignment of at least one Avenue or Boulevard a djacent to or within the site, or to an existing grid of local streets immediately adjacent to the site. 4-1.16 Connectivity Road and pedestrian connectivity will be maximized within the Urban Policy Area through connections between Local Streets, Avenues, and Boulevards at regular intervals, and sidewalks along all public and private streets and commercial driveways. 4-1.17 Roadway Widths Streets shall be designed to minimum widths required by the standards of the Virginia Department of Transportation, in accordance wit h an appropriate multimodal street section type approved with this document. 4-1.18 Curb Radii Corners at intersections along Boulevards, Avenues, and Local Streets in the Urban Policy Area shall be designed to shorten the crossing distance for pedestrians and slow turning traffic in order to increase safety for all system users. Corners at the intersection of two Multimodal Through Corridors shall be designed to facilitate both traffic flow and pedestrian safety. 4-1.19 Turn Lanes Turns lanes will be provided along Mul timodal Through Corridors. Turn lanes will be provided along Boulevards, Avenues, and along commercial driveways only where warranted and needed for safety. Turn lanes are prohibited along local streets as defined in this plan. Free-flow turn lanes are prohibited to or from Boulevards, Avenues, or Local Streets. Dual left -turn lanes are prohibited along Avenues, and Local Streets. Dual left-turn lanes are permitted on Boulevards only at intersections with Multimodal Through Corridors. 4-1.20 Cul-de-Sacs Cul-de-sacs and dead -end streets are prohibited in the Urban Policy Area, except where specific environmental constraints, road design minimum standards, or public amenities exist that would prohibit a connection, and reasonable development alternatives are no t feasible. Service driveways and parking access driveways are not subject to this policy. 4-1.21 On-Street Parking On-street parallel parking shall be provided where feasible along all Avenues and is encouraged along all Boulevards in commercial, industrial, and residential districts, except where the proposed adjacent use will generate minimal travel and occupies an area greater than 660 feet in length. On -street parking will be clearly striped and indicated by signage along the street. On-street parking is recommended along local streets in commercial, industrial, and residential districts. Angled or perpendicular on- street parking spaces are prohibited along all public and private streets within the Urban Policy Area. 4-1.22 Lane Strip ing Roadway lanes should be striped at a width appropriate to the DRPT Multimodal System classification, even if they have a wider curb-to-curb width. 4-1.23 Traffic Controls All intersections within the Urban Policy Area shall include traffic control signs or signals so as to clearly indicate right-of-way for all system users. 4-1.24 Roundabouts Roundabouts should be considered as an alternative to traffic signals and stop controls along Avenues and Local Streets, particularly at entrance gateways to commercial or residential districts. Roundabouts are not preferred along Transit Corridors. 4-1.25 Traffic Calming on Boulevards and Avenues Boulevards and Avenues shall be designed to permit traffic to operate efficiently at speeds appropriate for the area. As such, measures should be taken during the initial design phase to incorporate elements that will provide a safe environment for all users. On-street parking, roundabouts, textured crosswalks, curb extensions, median islands, and pavement markings that indicate a reduced travel -way width should be incorporated into land development and construction plans. 4-1.26 Traffic Calming on Local Streets Local streets should be designed to prioritize pedestrians. As such, raised crosswalks and intersections, miniature roundabouts, striped chicanes with parking bay s, and curb extensions should be employed to maintain appropriate vehicular traffic speeds and provide for safe pedestrian crossings. Urban Policy Area Bicycle and Pedestrian Transportation Often paired, cycling and walking are two distinctive transportation options that can be made possible with incorporation of infrastructure to support these travel modes. Generally, people will choose cycling or walking for shorter trips as well as for recreation. In the Urban Policy Area, the development patterns outl ined in Chapter 3 of this document support walking and cycling by establishing a mix of uses, residential density to support these uses, and street design elements to make these non -motorized modes not only an option, but a preferable alternative to driving or taking transit. A bicyclist and pedestrian -friendly development pattern may also help to remove potential vehicle trips from the roadway as people may choose to shop locally and seek employment locally, rather than driving to these destinations and a dding cars to the area’s roadways. Below is a discussion of how to facilitate development that considers accommodations for bicyclists and pedestrians. Bicycle mobility is important for the suc cess of the Urban Policy Area . Cycling has become a primary mode of travel in urban areas throughout the United States, allowing for short- to medium- range trips with no per-mile transportation cost to the commuter. A multimodal urban center must accommodate bicycles in a safe and inviting manner through buffered, connected, and logical bike lanes, and ample bicycle parking. The proliferation of bicycles is possible when safe, convenient, and abundant networks are put into place to provide real mobility. A comprehensive network will not only lead to a significant increase in bicycling for commutes and errands, but these trips directly reduce automobile trips and help to alleviate vehicular congestion on roads by making these other modes of travel more feasible. This will also ease demand for limited parking spaces, which are costly to construct and maintain in an urban environment where land values are high. The more comprehensive the bicycle network, the exponentially greater the impact. In many American cities, investments in bicycling infrastructure has helped to draw young professionals and dynamic businesses, further growing their local economies. For commuter cyclists, real mobility exists when a combination of shared low -speed travel lanes, dedicated bicycle lanes on medium -speed roadways, and buffered bike lanes on higher -speed roadways are provided in a complete and practical form to create a network that caters to commuter cyclists. This plan includes a detailed plan for on- road bicycle lanes in the Urban Policy Area, with an overall goal of creating a bicycle-friendly environment for residents, workers, and visitors. On-road bicycle facilities exist in many form based upon the roadway characteristics. On low - speed local roads, bicycles may be able to safely share the travel lanes with vehicles. To facilitate this multimodal operation, signage, such as “Share the Road” signs, and striping, suc h as “Sharrow” markings can be used to alert drivers to the presence of cyclists. On slightly more prominent roads with more traffic, striped bike lanes, which create an additional, narrow travel lane intended only for bicycles, may be suitable. Often, the se types of lanes are best located on streets with moderate traffic speeds, where other moderate- speed elements, such as on -street parking and frequent pedestrian crossings can be accommodated. For higher -speed roads, providing a dedicated bicycle lane is crucial, as is ensuring its separation from vehicular traffic. This can be accomplished by adding a striped-out area between the bike lane and the vehicle lane, providing a buffer between modes. This buffered bike lane helps ensure that errant drivers and cyclists will be less likely to cross paths, just as a highway shoulder helps ensure that errant drivers have some ability to regain control of a vehicle before departing the roadway altogether. On the highest-speed roads, however, accommodating cyclists i n a safe and comfortable manner on the roadway may not be possible. While regular cyclists tend to prefer the roadway where traffic is of a low-to-moderate speed (35 MPH or under), higher speed corridors are often incompatible with on-road bicycling, inste ad requiring a trail adjacent to the roadway. In these cases, it becomes critical that the trail is arranged to accommodate cyclists, limiting tight curves and providing clear sightlines for safety. Off-road trails can further improve this network, with w ell-placed and well -designed paths providing an additional layer of connectivity for cyclists. This, however, depends on these trails becoming an integrated part of the network, with adequate space for cyclists and pedestrians, manageable curves, protected roadway crossings, and frequent, bicycle -friendly access points. These trails can serve a dual purpose: providing commuter routes during weekday peak travel periods while providing recreational opportunities during early -mornings, evenings, and weekends. In order to facilitate demand for these trails for either use, it is critical that these pathways are pleasant, with good maintenance and natural features, and safe, with adequate sightlines, trail markings, and wayfinding. This plan includes a detailed plan for off-road trails in the Urban Policy Area in order to create commuting routes and family-friendly amenities that serve to promote and enliven the outdoor environment. While road- adjacent trails can also provide useful connectivity along major corridors outside of the development core, they are not appropriate in high-density urban areas due to the pedestrian activity in these locations. As such, in these areas, sidewalks and on-road bicycling are more compatible with the Urban Policy Area’s mobility and development goals. Asphalt trails, or shared -use paths, in the Urban Policy Area serve two important and distinct purposes. They provide recreational opportunities through their role as linear parks, allowing families to ride bicycles together or hike through nature, and allowing opportunities to experience a natural environment interwoven into one that is markedly urban. However, they are also a key component of a multimodal transportation system. While a trail may serve as a recreational amenity on Saturday afternoon, come Monday morning, it can also become a commuting route for those walking or riding a bicycle to work. Loudoun County already has a transportation corridor of this nature: the Washington & Old Dominion Regional Park Trail. Well used by commuters and leisurely travelers alike, this route is often over -capacity, with pedestrians, joggers, recreational cyclists, and commuter cyclists all in conflict with one another. The popularity of this facility speaks to the need for more trail systems in the County, as well as to the importance of these trails not only as parks but as part of the transportation system. Bicycle Amenities An important part of a comprehensive bicycle network, stationary amenities such as bicycle parking are necessary components of a complete system. Similar to a road network without traffic signals or adequate parking, a good bicycle network requires quality bicycle parking, including bike racks and bike storage that are provided with a high level of access to maj or destinations. Additionally, with a complete network comes opportunities for services such as bike share, allowing tourists and workers a ccess to bicycles away from their homes, and providing opportunities for “last mile” travel, so that people living or working within bicycling distance – but not walking distance – of a transit center can reach their destinations without requiring a personal vehicle or waiting for the bus. Comprehensive Vision for Bicycling Creating a comprehensive bicycle network means developing a system that serves bicycle commuters, those shopping and making local trips by bicycle, and those cycling for recreation and/or exercise. The network proposed within this plan provides ample options for all of these users, ensuring travel options for current and future residents, workers, and visitors. Pedestrian Connectivity A comprehensively connected pedestrian network is integral to the success of the Urban Policy Area. The promise and economic success of the Urban Policy Area is dependent on providing an inviting, accommodating, and safe environment, encouraging pedestrian activity within the urban core. Pedestrians are not only a critical transportation component, but also act as a magnet, attracting economic growth and development. Achieving the goals of a walkable and vibrant urban center is only possible with human- scaled transportation system development, including street sections at a scale narrow enough for all pedestrians to cross comfortably with elements such as curb extensi ons to shorten crossing distances, crosswalks at frequent intervals, direct routes between key destinations within the urban center, and grade separation where pedestrian and/or vehicular traffic volumes and/or road widths make at-grade crossings impractical. Pedestrians depend on many factors to make travel comfortable and easy. Like roadways, sidewalks that are too narrow may feel constricted, especially if located along a wide roadway or tall buildings. Also like roadways, wider sidewalks can encourage pedestrian activity, as the sidewalks become more accommodating to large groups and conversations. Human- scaled transportation elements also include analysis and consideration focused on the pedestrian experience. A mile- long journey that may take 4 minute s for a driver in a climate- controlled vehicle within a moderately-dense environment takes approximately 20 minutes for a pedestrian in the elements, assuming a safe and direct pathway is available. Therefore, considering the needs of pedestrians means thinking at a pedestrian scale, understanding that a short travel distance for a driver may be significant for a pedestrian, and that the amenities offered by a personal vehicle cannot be provided in the same way for a pedestrian. Therefore, improving conditi ons for pedestrian travel must be accommodated in other ways, such as creation of an attractive streetscape, development of awnings and inlets to provide temporary shelter, provision of benches and tree for sitting and shade, and allotment crosswalks, signs, and signals that can ensure safe interaction with vehicular travel ways. The most prominent conflict for pedestrians in a suburban environment is often the barrier of wide and intimidating roadways that can feature up to 150- foot wide crossing distances. That distance requires more than 30 seconds for a typical pedestrian to cross, and far longer than that if the pedestrian is unable to move at a rapid pace. Additionally, these types of roadway promote automobile travel, with drivers often unprepared for the presence of pedestrians, making collisions between vehicles and pedestrians, especially when vehicles are turning, particularly common. While ground- level pedestrian activity is always preferred, and visually -appealing crosswalks are encouraged, high -volume, wide thoroughfares may require more extensive crossing infrastructure, including grade-separation, in order to ensure that system users, including children, senior citizens, and disabled individuals can cross safely. The vision for the Urban Policy Area is a highly -connected pedestrian -friendly network that supports and encourages pedestrian activity and makes walking a preferred mode of travel. This can be achieved through construction of a comprehensive system, development of pedestrian- oriented neighborhoods, and a focus on pedestrian nodes. Bicycle and Pedestrian Connectivity Policies 4-1.27 Bicycle Lanes Marked on-street bike lanes (minimum 5 feet in width) shall be provided where called for by the Bicycle Facilities Plan. On roads with speed limits of 30+ MPH or roads with at least four through travel lanes, bicycle lanes shall be buffered from traffic by striping at least 3 additional feet in width. Buffer zones are recommended, but not required, where on -street p arking spaces are provided adjacent to the bicycle lanes as they help provide additional space between both open doors from parked cars and moving traffic. 4-1.28 Trails Off-street asphalt trails shall be constructed in accordance with the Urban Policy Area Trails Plan. Where parallel and adjacent to a roadway, these trails shall be at least 10 feet in width and shall provide a direct route (without overly meandering devi ations) to allow for moderate bicycle speeds. Where routed independently from a roadway, the trails shall be at least 16 feet in width and feature a separating stripe down the center of the path to indicate the bi-directional nature of the trail. 4-1.29 Intersection Crossings At intersections, curb ramps shall be placed in the direction of the bicycle path to facilitate through movements. Where both sidewalks and trails intersect with a roadway in the same direction, separate crosswalks should be marked for trail users (bicyclists) and for those on the sidewalk (pedestrians), as permitted by VDOT. 4-1.30 Trail Construction Development proposals shall include construction of trails, or at minimum, reservation or dedication of trail easements where indicated by the plan. Unless specifically indicated otherwise by the plan, all trails shall be paved for ease of use and access for all system users. Trails included in the Bicycle Facilities Plan shall include a public access easement along their entire length or be dedi cated to the County as a linear park in order to ensure public right of access along throughout the trail network. 4-1.31 Dedicated Roadway Crossings For roadway crossings as part of the off -road trail network, the County shall seek public and private opportuniti es to construct grade- separated crossings. As an interim condition, traffic signals may be sought to provide a safe crossing of roadways with four or more vehicular travel lanes. 4-1.32 Bicycles on Roadways without Bicycle Lanes and Trails On two -lane Avenues and Local Streets without on -street bicycle lanes or adjacent trails, travel lanes shall be designed for use by vehicles and bicycles through pavement markings and/or “Share the Road” signs to convey awareness of the presence of bicyclists in the vehicular travel lanes. 4-1.33 Bicycle Parking Secure bicycle parking (bike racks) for at least four bicycles shall be provided at average intervals of once every 660 feet (1/8 th of a mile) within commercial districts and once every 1,320 feet (1/4 th of a mile) within residential districts. Bicycle parking will be provided in public parks and near primary entrances to public facilities. 4-1.34 On-Site Bicycle Facilities Secure bicycle rooms are encouraged within high- density residential and commercial buildings proposed within the Urban Policy Area to encourage bicycling among residents and employees. 4-1.35 Bicycle and Pedestrian Connectivity Plan Land development applications within the Urban Policy Area shall demonstrate conformance with the Urban Policy Area Bicycle and Pedestrian Plans and, for legislative applications, shall include a bicycle and pedestrian connectivity plan, clearly indicating on-road and off-road mobility options proposed with the application. 4-1.36 Sidewalks Minimum eight-foot sidewalks are required along both sides of all Multimodal Through Corridors, Boulevards, and Avenues, and are encouraged along all Local Streets, within the Urban Policy Area, regardless of use or location, except where specific provisions are described for the roadway in Chapter 3 of this plan. Minimum six-foot wide sidewalks are required along both sides of any Local Street in the Urban Policy Area, regardless of use or location. 4-1.37 At-Grade Pedestrian Crossings Safe pedestrian crossings shall be incorporated into all intersections within the Urban Policy Area for all pedestrian approaches. 4-1.38 Grade-Separated Pedestrian Crossings Grade-separated crossings may be provided in lieu of an at -grade crossing if such a crossing meets the grade- level sidewalk within 660 feet (1/8th of a mile) of the subject intersection. Grade-separated crossings are preferred to connect dense developments on either side of Multimodal Through Corridors and other higher-speed and wide roadways where the street typology is not conducive to a pedestrian environment. 4-1.39 Crossing Accessibility and Safety Grade-separated and at -grade pedestrian crossings shall be fully -accessible for all users, complying with all local, state, and federal regulations, and shall be, at minimum, 16 feet in width. Tunneled and skyway crossings shall include lighting throughout for pedestrian safety and clear sightlines from end to end, including at approaches. Signing shall be provided directing pedestrians and cyclists to use the grade- separated crossing in order to reach the opposite side of the roa dway. Pedestrian refuge islands should be considered for at-grade crossings of wider roads where space allows. 4-1.40 Pedestrian walkability In order to maximize pedestrian access and mobility, pedestrian networks should provide direct routes to major destinations within the grid, as possible. When trip reductions are applied as part of traffic study for a development application, transit walksheds are required to provide a high-level of pedestrian access in coordination with plan policies. 4-1.41 Curb extensions In order to narrow the travel width of an intersection, curb extensions should be constructed at all crossings along streets with on- street parking, unless a right - turn lane is required per policy at the intersection. 4-1.42 Crosswalks Crosswalks shall be provided at all intersections within the Urban Policy Area. Crosswalks shall be provided along avenues and boulevards a least once every 1,320 feet (1/4 th of a mile), shall be designed to VDOT standards, and shall include appropriate signage and/or signaling to ale rt drivers to presence of pedestrians. Along Multimodal Through Corridors, Boulevards, and Avenues, crosswalks will be marked in an enhanced style, such as Solid, Continental, Zebra, Ladder, or another similar style acceptable by VDOT that provides a highly visible indication of the potential for pedestrians to be crossing at that location. Urban Policy Area Transit Infrastructure A critical element of an urban area, public transportation serves as most efficient way to move people along popular commuter routes and between activity centers. This is b ecause far more people can be transported comfortably in a railcar or bus than in a personal vehicle and no dedicated space is needed to park that transit vehicle. Within the Urban Policy Area, transit services are planned to include Metrorail, commuter, limited -stop, express, and local buses, and shuttles and circulators. Together, these services provide accessibility, convenient, and affordable access for people both inside and outside of Loudoun County. Metrorail Transit service in the Urban Policy Area is centered around Metrorail. The Dulles Corridor Metrorail Project (Silver Line) will include stations at Ashburn , Loudoun Gateway, and Dulles Airport in Loudoun County and Innovation Center in Fairfax Count y on the Loudoun County border with frequent service to the commercial centers at Herndon, Reston, Tysons, Arlington, and Washington, DC. Though not part of the current project, the Town of Leesburg envisions in its Town Plan an extension of Metrorail to Leesburg, following the Dulles Greenway corridor. With the arrival of Metrorail service to Loudoun County, existing bus transit service will be altered to serve changing commuter patterns. Countywide (local and express) Transit Network Metrorail is comple mented by a comprehensive and dependable local fixed -route bus service connecting people to places throughout Loudoun County. To create and enhance a high- quality transit system, frequent, fast, and dependable service, as well as clean and comfortable vehi cles and stops are provided. These routes run both express service to important locations throughout the County and more locally to neighborhoods and communities. Within the Urban Policy Area, a limited number of routings between the Metrorail stations and the fringes of the Urban Policy Area will increase service on key roadways and provide opportunities for easy transfers. Every local bus route provides access to a Metrorail station or a Transit Center. Optimal service for local fixed - route bus services are at least every 15 minutes in the peak periods, with, at minimum, 30 minutes in the off-peak. Fares should be commensurate with surrounding jurisdictions, and discounts for transfers to/from Metrorail should be studied. Several major corridors within the Urban Policy Area are designated as Transit Corridors. These streets will serve as the primary routes for the countywide transit network through the Urban Policy Area, providing efficient and logical routes between locations throughout the County and the Metrorail Stations. Located primarily along four-lane roads, these streets are designed to facilitate travel of transit and private vehicles alike. In order to facilitate dependable and logical transit routes, stop locations will be placed strategicall y at key locations along the corridor, at distances that provide access to the surrounding area without unnecessarily frequent and underutilized stops. Bus stop locations should face the Transit Corridor when possible, rather than an intersecting or adjacent street, to provide dependability and clarity of route to riders. For this system to function properly, it is also crucial that bus stops on either side of a Transit Corridor are located at the same intersection so that riders may depart and alight a transit vehicle at the same approximate location. Features along these corridors may include enhanced bus stops and transit centers, intelligent transportation system devices (such as signal preemption), transit -friendly street elements, and frequent crosswalks. These streets should be considered for transit lanes at such time as transit ridership and projected growth within the area can justify such an improvement. Localized Shuttles and Circulators Private developments may choose to operate private shuttles connecting residents, employees, and visitors to locations within their site, or to Metrorail services. These private shuttles may be interim – until public transportation service is implemented – or permanent. However, demands for public transportation services and constrained space at the Metrorail Stations for transit vehicles may limit the effectiveness of these services as substantial growth occurs. Aside from countywide bus services and private shuttle services, circulator services localized within the Urban Policy Area can efficiently move people in high -density areas with all -day demands for service between the Metro Stations and the core developments within the Urban Policy Area. This circulator is different from countywide local routes in both its character and route, using smaller buses and preferring denser, busier, and often slower streets that bring people to the most popular centers in the area, even at the expense of slightly increased travel times. Fares on circulator routes are usua lly lower than local fixed -route services, if not free altogether. Circulators, unlike traditional buses, are considered to be economic incubators and tend to run at all times, with the greatest demand and frequently in the evening and on weekends, when tourism to the area is most prominent. A conceptual map of potential circulator routes is shown below. These routes are intended for conceptual purposes only and would be further planned in coordination with the entity that would be operating the service. In the long term, circulator routes should comprehensively cover residential and employment centers within the Urban Policy Area, ensuring that all residents and most employees are within a five minute walk of a shuttle stop. As the below concepts indicate, at least four shuttles are envisioned: • A Moorefield Station Shuttle providing a connection between Moorefield Station and the Ashburn Metrorail Station South Transit Center. • An Ashburn Station Shuttle providing a connection between areas north and south of the Ashburn Metrorail Station and the Ashburn Metrorail Station South Transit Center. • A Loudoun Gateway Station Shuttle providing a connection between the Route 28 Business District and the Loudoun Gateway Metrorail Station Transit Center; and • A Silver Line Loop Circulator providing a connection between the Ashburn North, Ashburn South, and Loudoun Gateway Transit Centers and the surrounding areas. These shuttles will provide direct routes between development areas and the Metrorail Stations in order to ensure convenient and reliable access to all parts of the Urban Policy Area. Transit Amenities Bus shelters are an important element at stop locations, with stops and associated shelters placed at intervals relative to the surrounding development density. In higher density areas, more frequent stops are assigned, with frequencies declining as dictated by housing and commercial density. Regardless of spacing, well-lit and signed shelters placed at the bus stop locations should be easily identifiable and inc lude service information where feasible. In the central core of highly dense areas, more prominent and inclusive amenities are constructed to provide for modal transfers, higher ridership demands, and route transfers. The transit toolkit in Chapter 3 provides guidelines for these improvements. Urban Area Transit Infrastructure Policies 4-1.43 Transit Infrastructure Design Development and implementation of transit infrastructure will be based upon the policies of this plan and the guidelines provided in the Transit Toolkit in Chapter 3. 4-1.44 Metrorail Project Facilitation The County will facilitate the implementation of the Dulles Corridor Metrorail Project, extending to Ashburn via intermediate station stops at Innovation Center, Dulles Airport, and Loudoun Gateway. 4-1.45 Improvements Associated with Metrorail The County, in partnership with VDOT, WMATA and/or other appropriate agenci es, will ensure that land needed to provide planned rail -related improvements is obtained or reserved prior during review of land development applications. Land acquisitions and reservations will consider long -range transit plans as well asshort term improvements. 4-1.46 Transit Corridor Elements Specific streets identified as Transit Corridors will be designed for transit service with special attention to transit elements including transit shelters and stations, bus bays, and bicycle and pedestrian access to transit services. Development proposals should concentrate the location of fixed transit elements along these roadways in accordance with the policies outlined below. 4-1.47 Transit Corridor Design Roundabouts and raised roadway traffic calming measures are prohibited along Transit Boulevards and other Transit -Priority Roadways, unless specifically designed to accommodate transit vehicles. 4-1.48 Intelligent Transit Systems Transit -priority elements such as traffic signal preemption and active parking information signage should be considered as part of transit system development within the Urban Policy Area. 4-1.49 High-Capacity Transit System Development Transit Corridors should be prioritized for any future plans for transit-priority lanes through the Urban Policy Area. 4-1.50 Private Shuttles In order to ensure residents and employees in the Urban Policy Area have a car -free option for travel to and from Metrorail, the County will seek private shuttle services between developments within the Urban Policy Area and at least one of the Metrorail Stations during review of legislative land development applications. These shuttles should operate at a minimum frequency of every 15 minutes during peak hours and every 30 minutes during all other times that Metrorail is operating. 4-1.51 Land Development Applications Proposed circulator routes and stop locations should be indicated on applicable land development application materials in order to ensure integration and route connectivity with adjoining developments. 4-1.52 Provision of Service Fixed-route private shuttle services will be operated on an interim basis, ceasing operation at such time as a public circulator service is initiated that provides redundant routing and frequency. 4-1.53 Circulator Routes Circulators will be routed to provide direct access to development nodes within the Urban Policy Area Urban Policy Area TDM Strategies Urban development patterns provide ample opportunities for implementation of bold TDM strategies. Walking to work becomes a viable option for many people. High ridership transi t service is made possible by increased density along major corridors. Possibilities for bike share and car share services that are dependent on integrated residential and office environments can grow in demand in order to serve the area. Public Transit Walksheds and Trip Reductions Trip reductions based on transit access from a proposed development are encouraged in the Urban Policy Area . These reductions will consider several factors related to use, transit services available, access to transit service, and orientation of uses toward transit with appropriate connectivity. Scoping agreements for traffic impact studies shall be based on walksheds described herein (which could vary within the development area), and the design of the transportation network within the development site to facilitate the level of transit- use described in the scoping document and traffic impact study. Transit reductions for local transit will vary, not to exceed the rates outlined above, based upon a review of: • The overall frequency of all existing transit services serving the site, including combined headways and hours of operation (weekday / peak / weekend). • The type of service offered (local / limited / express). • The scale of bus facilities existing on the site or proposed as part of the land development application (shelter / transit center / transit station). • Estimated transit ridership based on the proposed uses and likelihood of the proposal to generate ridership at a level equitable to the requested reduction. TDM Policies 4-1.53 Live/Work The County will provide information regarding the benefits of working in mixed-use urban center and encourage employees to consider options for living closer to their workplaces. 4-1.54 Metrorail and Transit The County will strongly encourage the use of Metrorail and other transit services, and work with companies in the Urban Policy Area to develop strategies to encourage daily ridership, and incentives for those who do not drive alone. The County will work with development applicants to ensure that transit is feature d as a prominent component of the development proposal. 4-1.55 Traffic Scoping The trip reduction guidelines described in this section shall be applied to planning studies, traffic impact study scoping documents, and land development applications, as applicable and requested, when identifying needs and mitigating impacts of proposed transit-oriented developments. During traffic scoping, the Applicant may also request to take reductions based on ITE, ULI, or other accepted industry standard urban development impact evaluator in consultant with County staff. 4-1.56 Vehicle Trip Reductions Trip reductions shall be permitted for different uses within the Urban Policy Area based upon walkshed and access to transit if the site is designed according to the gui delines for transit-oriented developments within this document. The primary/public building entrances claimed within the walkshed must be located within the walkshed area for the associated reduction to be utilized. 4-1.57 Minimum Parking Reductions Reductions to parking requirements will be evaluated by standards of the County’s Zoning Ordinance and policy. The policy component of this review will be based upon the trip reductions described above as well as any information provided by the Applicant as justification for the reduction. 4-1.58 Car Share and Bike Share The County will study the creation of a bike share system and encourage car sharing services to locate in the Urban Policy Area in order to allow residents and workers to access local and regional services without the need for a private automobile. The County will request that development applicants provide opportunities for car share and bike share within their developments. 4-1.59 Carpools and Vanpools The County will work with employers in the Urban Policy Area to encourage workers to commute by carpool and vanpool, and to incentivize those who do not drive alone. 4-1.60 High-Occupancy Vehicle and Bus Lanes The County will consider alternative travel lane typologies along roadways within the Urban Policy Area in order to encourage alternative travel options. 4-1.61 Dynamic Parki ng The County will encourage the development of dynamic parking systems in public and publicly -accessible parking structures in order to guide drivers to available spaces. Suburban Policy Area Suburban areas are typified by networks of wide, high-speed roads and tree-lined residential local streets defined by curves and cul-de-sacs, strip center retail, and isolated office parks, while heavily oriented towards automobiles. As the County’s suburban areas have built out, plans and policies have sought to improve upon this model through encouragement of interconnectivity, strengthened pedestrian access, and integration of both commercial and community amenities into development planning. Today, these efforts have in many ways bucked many of the problems of traditional suburban development while sustaining the positive aspects of suburban livi ng, such as access to open space, access to goods and services, and moderate densities that provide for community integration and personal space. Modern definitions of quality of life have reflected these trends, with consumer preference for townhomes, bicycle and pedestrian facilities, and walkable amenities driving demand. In order to accommodate these desires, the policies below are designed to facilitate safety and operation of this modern transportation system while providing flexibility to accommodate the types of uses the market demands. Suburban Policy Area Built Environment For the purposes of this transportation plan, the suburban built environment is best defined as the spaces between the places (trip origins and destinations), including site ac cess, parking, and the relationship between structures and streets. In the Suburban Policy Area, this means engaging buildings into transportation system planning to ensure that placemaking can occur while support suburban mobility needs. Suburban Built Environment Policies 4-2.1 Structure Access All buildings will be designed to accommodate safe and convenient pedestrian access between building entrances, parking areas, and adjoining streets. 4-2.2 Quality Design The County supports proposals for quality design for st reets and transit shelters, including the use of enhanced materials, plantings, and wayfinding signage to enhance the aesthetic character of development. 4-2.3 Entrances Building entrances should be designed to face streets either along or internal to the development in order to provide opportunities for improved streetscape and encourage pedestrian traffic. 4-2.4 Village of Ashburn This plan supports the preservation and enhancement of the Village of Ashburn through context -sensitive transportation network design and consideration of historic structures and preservation of the village aesthetic. 4-2.5 Plan Coordination Transportation Improvements in the Suburban Policy Area will meet the policies and intent of this document as well as other policies of the Comprehensive Plan. Suburban Policy Area Roadways While this plan attempts to provide modal options for travelers throughout the Suburban Policy Area, the primary mode of travel in the suburban area is the automobile. Therefore, completion of the planned roadway network is critical to success of the planned suburban area. The policies below seek to create a safe, efficient, and connected road network in the suburban area, promote the suburban quality of life desired by residents within this area. Suburban Roadway Policies 4-2.6 Design Standard All roadways in the suburban area shall be designed consistent with the Roadway Design Toolkit. 4-2.7 Grid of Streets Roadways will be designed to facilitate development of a grid of local streets with integrated bicycle and pedestrian access. 4-2.8 Integration of Uses The County will improve the planned and existing motor vehicle, bicycle, and pedestrian networks in the Suburban Policy Area by encouraging additional connections between neighborhoods and between residential and employment areas where such connections can be made with minimal disruptions. These connections will be prioritized where it can be demonstrated that such connections will ultimately reduce congestion. 4-2.9 Level of Service For public and private transportation projects within the Suburban Policy Area, a Level of Service threshold of LOS D or better, overall and by approach, will be the standard for analyzing needed improvements. 4-2.10 Interparcel Access Interparcel access reservations will be provided via dead end streets, cul-de-sacs, or l and reservations as part of development applications, including redevelopment applications, where adjacent parcels are undeveloped or could be redeveloped in the future. 4-2.11 Connectivity Development applications will connect to established interparcel access points or reservations, unless sufficient justification can be provided for abandoning such a potential connection. 4-2.12 Traffic Calming Traffic calming measures shall be considered for local and collector roadways in the Suburban Policy Area to improve multimodal safety and quality of life. Suburban Policy Area Bicycle and Pedestrian Facilities One of the primary benefits of suburban living is the opportunity to enjoy open space while living proximate to workplace and lifestyle destinations. While the automobile is the primary mode of transportation in the suburban area, it is crucial to provide opportunities for bicycling and walking for short trips, to provide mobility to those who cannot drive, and for recreation. As in urban areas, a complete network is neces sary to realize the full potential of bicycle and pedestrian systems in the suburban area. Suburban Bicycle and Pedestrian Policies 4-2.13 Provision of Facilities Bicycle and pedestrian facilities are required along both sides of all public and private streets in the Suburban Policy Area, designed and constructed consistent with the policies and Roadway Design Toolkit of this plan. 4-2.14 Off-Road Trails Provision of publicly-accessible off-road trail networks through suburban neighborhoods is highly encouraged. Such networks will provide for greater access to natural amenities and activity centers. 4-2.15 Off-Road Trail Parking Areas Small parking areas intended to serve recreational trails in the suburban area, including the W&OD Trail, are supported by this plan. Such lots may be privately maintained by entities other than the County or VDOT. Wayfinding and informational signage will also be provided at these parking areas to direct cyclists and pedestrians to nearby destinations. Suburban Policy Area Transit Infrastructure The suburban policy area features suburban street grids, but in many places within the county, development densities present opportunities to expand local transit service by attracting riders through convenience and, in the coming years, access to Metrorail and planned urban centers. This means that coordinated planning with identification of potential transit corridors can help to facilitate these ridership growth opportunities. Additionally, community park- and-ride lots can offer transit services, increasing the efficiency of the suburban road network and providing travel options to those seeking to reach major job centers. Suburban Transit Infrastructure Policies 4-2.16 Park-and-Ride Lots Regional park and ride lots shall be considered for placement at the outskirts of communities and neighborhoods to attract nearby residents to depart the public road network and shift to transit prior to reaching the County’s most demanded arterial roads. 4-2.17 Bus Shelters Curbside bus shelters are encouraged along collector roads in the suburban policy area. This will ensure that such investments are located along pedestrian -friendly corridors that can efficiently accommodate transit services. 4-2.18 Bus Lanes Opportunities for bus-only, bus-priority, and signal-priority shall be evaluated along major corridors in the county. Such studies will consider ridership demands, potential service types and patterns, and key locations where such facilities would have the most significant impact on reducing travel time for transit riders. 4-2.19 Stop Loc ations It is anticipated that bus stops intended to serve specific uses will be located to provide logical and direct access for transit riders between the stop and building entrances, including placement such that the rider will not need to cross parking lots or travel a further distance than is reasonable. Suburban Policy Area TDM Strategies A balanced transportation system is vital to Loudoun citizens. The County supports and promotes a variety of commuting options for residents, employees and visitors. These include carpools and vanpools, rail and bus transit, bicycling, walking, teleworking and alternative work schedules. To facilitate these options, transportation demand management (TDM) strategies are implemented to encourage use of positive commuting options. TDM strategies also seek to reduce single occupant vehicle (SOV) travel, thereby increasing the efficiency of the transportation system. By providing mobility choices, air and water quality can be improved, congestion can be reduced, and citize ns may enjoy a better quality of life. TDM measures also support other goals within this plan, including the creation of walkable mixed-use communities, which help to reduce the need to build as many multi- lane roadways. In addition, mobility options serve the needs of a growing and diverse population, including non-drivers, and help attract economic development to the County. In the suburban area, TDM is key to improving utilization of existing facilities and services while accommodating growth. TDM programs help manage travel demand to make the systems more efficient with a core mission of moving more people in fewer vehicles, less demand during the peak travel period, or, in the case of teleworking, eliminate travel demand altogether. To accomplish these goals, TDM focuses on people -oriented transportation choices and efficient transportation solutions. The benefits of enhanced investment in public transportation and TDM programs to Loudoun County and the region span a broad range. Some of the most notable benefits include improved mobility and travel choices, decreased cost of travel, reduce roadway congestion, improved air and water quality, and opportunities for improved quality of life through decreased stress, time savings, and greater opportunity for rest or work while in transit, while allowing the transportation network to keep pace with needs of a growing population. Specific TDM programs offered by Loudoun County include transit services, carpool and vanpool programs, employer outreach efforts, telework support service s, provision of bicycle and pedestrian facilities, and planning and management of park and ride lots and HOV facilities. Suburban Transportation Demand Management Policies 4-2.20 Land Development Strategies for TDM will be evaluated and recommended at each stage of the development process for legislative applications, including at traffic study scoping stage, to evaluate opportunities t o mitigate transportation system impacts deriving from proposed land uses. 4-2.21 Trip Reductions TDM-based trip reductions included with traffic study scoping agreements will be evaluated as mode shifts and appropriate provisions will be requested during the land development review process to support such reductions. Such reductions will be reviewed taking into consideration existing and proposed surrounding land use patterns and opportunities for effective TDM implementation. 4-2.22 Recommended Improvements TDM will be facilitated through provision of facilities needs to accommodate programs, including but not limited to: transit shelters and stations, park-and-ride lots, bike racks, carpool and vanpool parking spaces, workplace TDM information displays, car sharing parking spaces, bicycle sharing stations, regional bicycle and pedestrian facilities, workpl ace transit commute benefit programs, private shuttle services, managed travel lanes, and financial support of County TDM programs. 4-2.23 County Efforts The County will encourage employers to support alternative travel modes by engaging employers, proving County staff support, and encouraging adoption of private TDM programs. 4-2.24 Parking Reductions The County will consider existing and proposed TDM programs as a factor when evaluating requests for modifications and reductions to parking requirements. These TDM factors will be evaluated based on demonstration of likely reductions to trip and parking generation rates commensurate with the demonstrated reduced forecasted demand for parking. 4-2.25 Shared Mobility The County shall encourage private provision of car sharing and bicycle sharing in public and private commercial and residential areas to decrease the demand for private vehicle ownership and parking. 4-2.26 Shared Rides The County shall encourage vanpooling and carpooling through public and private programs in order to encourage more efficient commuting and better use of the County's roadways. 4-2.27 Telework The County shall encourage public and private entities to provide opportunities for employees to telework, hold alternative hours, or provide opportunities for a compressed work schedule in order to improve travel along the County's roadways. 4-2.28 Metrorail Access The County supports the extension of Metrorail into Loudoun County and will continue to seek opportunities to increase ridership through improved mobility, access, and amenities in the vicinity of the station areas. Transition Policy Area The Transition Policy Area serves to provide a visual transition between the suburban and rural areas of the County. To achieve this goal, development in the Transition Policy Area should provide more rural features than the suburban area and more suburban features than the rural area. In the same vein, the transportation network should reflect the shifting development patterns and aesthetic between these areas. To achieve this type of built environment, the policies below reflect a combination of suburban and rural area policies. Transition Policy Area Built Environment The transition built environment is one that provides a defined transition between suburban and rural through chan ges to the aesthetic characteristics of transportation corridors. This means creating an environment that features elements of both rural and suburban design while still feeling connected, integrated, and logical to provide a sense of continuity and place. Transition Built Environment Policies 4-3.1 Setbacks All buildings shall be sufficiently set back from roadways to create a less intensive feeling along roadways, supplemented with native landscaping to enhance the aesthetic character of development. 4-3.2 Streetscape Building entrances should be designed to face streets along the development frontage in order to provide opportunities for improved streetscape. 4-3.3 Traffic Operations Site access will be designed to limit impacts to traffic operations along arterial and collector corridors, including incorporation of design elements to limit the need for traffic signals. 4-3.4 Plan Coordination Transportation improvements in the Transition Policy Area will meet the policies and intent of this document as well as other policies of the Comprehensive Plan. Transition Policy Area Roadways The road network in the Transition Policy Area is planned to reflect the transitional character of the area as outlined in the General Plan. The policies below represent a combination of suburban and rural roadway policies that will facilitate development of the transition area in a way that achieves its planned purpose. Transition Roadway Policies 4-3.5 Level of Service For public and private projects within the Suburban Policy Area, a Level of Service threshold of LOS C or better will be the standard for analyzing needed improvements. 4-3.6 Interparcel Access Reservations will be provided for future interparcel access via dead end streets, cul-de-sacs, or land reservations as part of development applications, including redevelopment applications, where adjacent parcels are undeveloped or could be redeveloped in the future. 4-3.7 Connectivity Development applications will connect to established interparcel access points or reservations, unless such a connection would disrupt significant environmental or natural features, or other sufficient justification can be provided for abandoning such a potential connection. 4-3.8 Capacity Collector and arterial roads in the transition area will be planned for the necessary capacities and roadway sections to accommodate through trips and are generally not intended to accommodate development beyond that planned to occur. 4-3.9 Transition Techniques Appropriate techniques will be used to visually signal to travelers that they have left the Suburban Policy Area and entered the Transition Policy Area. Some of these techniques include a reduction in the number of through travel lanes, a change to the design of the roadway section, a change in speed limit, increased natural landscaping and wider buffers, and a transition from curb and gutter to shoulder and ditch sections. Any improvements within the transition area will also be made consistent with the Roadway Design Toolkit. Transition Policy Area Bicycle and Pedestrian Facilities Through extensive provisions of open space, the transition area offers opportunities for recreation and enjoyment of nature. Bicycle and pedestrian connections can improve access to these amenities while also providing connectivity to residential, retail, and community centers. Transition Bicycle and Pedestrian Policies 4-3.10 Connectivity Developments will be designed to feature internally and externally integrated bicycle and pedestrian access, with great deference to preservation of natural topographies and environmental features. 4-3.11 Off-Road Trails Provision of publicly -accessible off -road trail networks is highly encouraged in the transition area. Such networks will provide for greater utilization and access to natural amenities. 4-3.12 Recreational Parking Areas Small parking areas intended to serve recreational trails in the transition area are supported by this plan. Such lots may be privately maintained by entities other than the County or VDOT. Wayfinding and informational signage will also be provided at these locations. Transition Policy Area Transit Infrastructure The auto-oriented nature of the Transition Policy Area provides opportunities for commuter park- and-ride lots. Comparatively, planned densities in the Transition Policy Area are generally incompatible with hig her population densities needed to support local bus service. However, planned activity nodes in the General Plan may provide opportunities for hybrid bus services with longer routes and fewer stop locations. Transition Transit Infrastructure Policies 4-3.13 Park and Ride Lots Regional park and ride lots shall be considered for placement along arterial corridors in the transition area to provide options to local residents as well as travelers from rural areas and those traveling from outside of the County. 4-3.14 Bus Shelters Curbside bus shelters shall be evaluated in planned activity nodes, but are not envisioned in other parts of the transition area where population densities are unlikely to support local transit services. Transition Policy Area TDM Strategies A balanced transportation system is vital to Loudoun citizens. The County supports and promotes a variety of commuting options to residents, employees and visitors. In the transition area, these commuting options include carpools and vanpools, commuter bus, bicycling, walking, teleworking and alternative work schedules. To facilitate these options, transportation demand management (TDM) strategies are implemented to encourage use of positive commuting options. TDM strategies also seek to reduce single occupant v ehicle (SOV) travel, thereby increasing the efficiency of the transportation system. By providing mobility choices, air and water quality can be improved, congestion can be reduced, and citizens may enjoy a better quality of life. In addition, mobility options serve the needs of a growing and diverse population, including non- drivers, and help attract economic development to the County. Transition Transportation Demand Management Policies 4-3.14 Land Development Strategies for TDM will be evaluated and recommended at each stage of the development process for legislative applications, including at traffic study scoping stage to evaluate opportunities to mitigate transportation system impacts deriving from proposed uses. 4-3.15 Trip Reductions TDM-based trip reductions incl uded with traffic study scoping agreements will be evaluated as mode shifts and appropriate provisions will be requested during the land development review process to support such reductions. Such reductions will be reasonable based upon proposed and surrounding land use patterns and opportunities for effective TDM implementation. 4-3.16 Recommended Improvements TDM will be facilitated through provision of facilities needs to accommodate programs, including but not limited to: transit shelters, park -and- ride lots, bike racks, carpool and vanpool parking spaces, workplace TDM information displays, regional bicycle and pedestrian facilities, and financial support of County TDM programs. 4-3.17 County Efforts The County will encourage employers to support alternative travel modes by engaging employers, proving County staff support, and encouraging adoption of private TDM programs. 4-3.18 Parking Reductions Parking reductions are generally not supported in the transit ion area due to the lower planned densities. Limited consideration of parking reductions will be considered on a case-by-case basis where it can be demonstrated that reasonable reductions in parking generation will be achievable. 4-3.19 Shared Rides The County wi ll promote vanpooling and carpooling through public and private programs in order to encourage more efficient commuting and better use of the County's roadways. 4-3.20 Telework The County will encourage public and private entities to provide opportunities for emp loyees to telework, hold alternative hours, or provide opportunities for a compressed work schedule in order to improve travel along the County's roadways. Rural Policy Area The Rural Policy Area represents the County’s goals to focus new urban and suburba n development in the eastern portions of the County, thereby maintaining and supporting rural economic uses and residential lifestyles throughout the west. As the largest policy area by geography, planning transportation capacity through this area with appropriate consideration of context, character, and preservation aesthetic is a challenging process. When planned correctly, such efforts can create opportunities sustaining the rural qualities that Western Loudoun offers for generations to come. Rural Policy Area Built Environment Although the “built” environment is not what comes to mind when picturing the west, development that does occur in the context of the General Plan requires consideration of access and impacts on the transportation system. The policies below seek to protect the rural area while being cognizant of the ever-increasing demands for mobility through this area by travelers to and from locations within and outside of the County. Rural Built Environment Policies 4-4.1 Setbacks Buildings in the Villages should be located closer to the street frontage and provide a consistent streetscape, while those outside of the Villages should be sufficiently set back from roadways to create a less intensive feeling along roadways, supplemented with native landscaping to enhance the aesthetic character of development. 4-4.2 Streetscape Building entrances should be designed to face streets along the development frontage in order to provide opportunities for improved streetscape. 4-4.3 Access Points Access points will be de signed to support the rural context, including shoulder and ditch sections, rustic elements, and preservation of the rural road corridor aesthetic. 4-4.4 Traffic Operations Site access will be designed to limit impacts to traffic operations along arterial and collector corridors. 4-4.5 Plan Coordination Transportation improvements in the Rural Policy Area will meet the policies and intent of this document as well as other policies of the Comprehensive Plan. Rural Policy Area Roadways Loudoun County has a network of over 265 miles of unpaved rural roads that reflect the County’s agricultural heritage, many of which were trail blazed in the 17 th and 18th centuries. The unpaved rural road network has a natural traffic calming effect that permits their shared use for horseb ack riding and hiking and contributes to the quality of life sought by rural residents . They are recognized as adding to the rural character that attracts tourists. They also facilitate the safe, efficient movement of farm vehicles. The County is committed to the preservation of a safe unpaved rural road network. It is also worth noting that paving this extensive network of unpaved roads is undesirable due to the cost of completing such a task, which would require reallocation of state funds from other, more utilized, roads in the Secondary Road Improvement Program (SRIP), such as those in the Suburban and Transition Policy Areas. In certain circumstances, unpaved roads may need to be paved. In consultation with the County, road paving occurs when VDOT can no longer provide adequate maintenance to keep the facility in operable condition due either to the geometry or traffic demands for the road. In such instances, the County supports the use of minimal -impact and context-sensitive design techniques, such as Pave-In-Place and Rural Rustic Road standards. Rural Rustic Road Program VDOT manages a Rural Rustic Road program that can be applied to any unpaved secondary road that carries at least 50 but no more than 1,500 vehicles per day , s erve predominantly local traffic, and that has been designated by the County as a Rural Rustic Road. The design and engineering standards of this program are intended to preserve the significant historic and environmental features of these low volume roadw ays, while limiting the need for additional rights -of-way. The inten t of this program is to improve travel conditions and dependability on the road while limiting traffic growth along the corridor by maintaining the most limited design and engineering stan dards necessary to maintain safe travel along the road. Pave-In-Place Program VDOT manages a Pave- In-Place program that can be applied to any unpaved secondary road that carries at least 50 but no more than 750 vehicles per day. These roads are paved within an existing right -of-way if possible or within a slightly wider right -of-way that is less than 40 feet wide based on considerations of safety, public input, historical and aesthetic features along the corridor, availability of land, and environmenta l considerations. Rural Roads Policies 4-4.6 Intent Transportation road improvements in the Rural Policy Area will be focused on the safety of all users and will be designed to protect the rural character of the road network. Such improvements will be consistent with the Roadway Design Toolkit. 4-4.7 Lanes All the roads in the Rural Policy Area will be retained as two-lane roads except VA Route 7 (Harry Byrd Highway) and portions of), US Route 15 (James Monroe Highway), and VA Route 621 (Evergreen Mills Road). 4-4.8 Traffic Calming Traffic calming measures will be incorporated into road projects in the Rural Policy Area to improve safety, with particular focus on Towns, Villages, and other historic areas. Improvements to roads in or adjacent to existing V illages will incorporate site specific design solutions to preserve the existing aesthetic and character. 4-4.9 Improvements All transportation improvements made within the Rural Policy Area will be designed to a rural standard, including use of shoulder and ditch sections, native plantings, and provision of turn lanes only where warranted and needed for safety and maintenance of traffic operations. 4-4.10 Level of Service For public and private projects within the Rural Policy Area, a Level of Service threshold of LOS C or better, overall and by approach, will be the standard for analyzing needed improvements. 4-4.11 Roadway Districts The County will seek to protect the historic and scenic qualities of roads within the Rural Policy Area through the designations of Historic Roadway Districts, Virginia Scenic Byways, and Historic Access Corridors. 4-4.12 Necessary Improvements The County will seek to make only essential safety improvements on unpaved rural roads based on volumes, the nature of the road users (local vs. regional traffic), and crash data. 4-4.13 Preservation The County will coordinate with VDOT on review of planned road improvement plans for rural roads so that the County can limit potential negative impacts on rural character, including features such as: • Tree canopy • Stone walls and fences • Hedgerows • Historic and Agricultural Structures • Significant View Sheds • Limestone / Karst topography 4-4.14 Low-Impact Improvements The County supports maintaining the unpaved roads as feasible. In cases where unpaved roads must be paved, the VDOT Pave-in-Place and Rural Rustic Road programs will be used to the maximum extent possible. The County will work with VDOT to expand opportunities and refine application of these standards through legislation. 4-4.15 Traffic Calming The County’s commitment to maintain its unpaved rural roads is a de facto recognition of the traffic calming effect of these roads on local traffic. Other traffic calming measures along rural roads will be designed with considerations of rural context and character. Rural Policy Area Bicycle and Pedestrian Facilities Cycling and walking along public roads is not generally associated with rural America. However, Loudoun County’s growing rural tourism industry and bucolic environment have led to a growing demand for cycling opportunities in the Rural Policy Area. This plan supports growth of a cycling network in the Rural Policy Area while promoting safety for riders. The plan also indicates the need for pedestrian facilities along primary roads and in the villages, where pedestrian activity is anticipated to occur. Rural Bicycle and Pedestrian Policies 4-4.16 Priority Facilities along primary roads and within the Towns and Villages will be prioritized in order to provide mobility within rural activity centers. 4-4.17 Villages Within the villages, sidewalks will be provided along both sides of all public and private streets. Rural Policy Area Transit Infrastructure The County provides select long- haul commuter bus services from limited portions of the rural area. However, the County does not operate local transit services in the rural area. Instead, these services are operated by Virginia Regional Transit and include a fixed-route local bus service and on-demand services. The relatively low densities in the rural area outside of the towns are generally unable to support transit services. However, future consideration may be given to routes through the rural area that connect rural towns and villages to transportation hubs either in the eastern portions of the County or in neighboring jurisdictions. Rural Transit Infrastructure Policies 4-4.18 Park-and-Ride Lots The County shall study and seek public input regarding opportunities for regional park and ride lots along primary road corrid ors in the rural area to provide options to rural communities as well as travelers from outside of the County , thereby mitigating some pressures on the County road network. 4-4.19 Commuter Bus Services The County will continue to support long-haul bus services from locations in the rural area, exploring opportun ities for connections to the County’s Metrorail Stations and evaluating the ongoing demand for these services. 4-4.20 Support The County supports the continued provision of local and on -demand transit services in the rural area by Virginia Regional Transit. Rural Policy Area TDM Strategies In order to maintain a high quality of rural life and low traffic congestion in the County’s rural communities, transportation demand management (TDM) measures can be instituted in the context of rural opportunities and lifestyles. Due to the relatively low population densities across the rural landscape, the types of TDM measures employed in denser portions of the County may not be adaptable in the rural area. However, certain steps can be taken to minimize the need for si ngle- occupancy vehicle travel in these areas. In the rural area, TDM can manage travel demand to make the systems more efficient with a core mission of moving more people in fewer vehicles, less demand during the peak travel period, or, in the case of teleworking, eliminate travel demand altogether. To accomplish these goals, TDM focuses on people-oriented transportation choices and efficient transportation solutions. The benefits of enhanced investment in public transportation and TDM programs to Loudoun County and the region span a broad range. Some of the most notable benefits include improved mobility and travel choices, decreased cost of travel, reduce d roadway congestion, improved air and water quality, and opportunities for improved quality of life t hrough decreased stress, time savings, and greater opportunity for rest or work while in transit, while allowing the transportation network to keep pace with needs of a growing population. Specific TDM programs applicable to rural development patterns may include long-distance transit services, carpool and vanpool programs, employer outreach, telework, provision of context - sensitive bicycle and pedestrian facilities, and planning and management of park-and-ride lots. Rural Transportation Demand Management Policies 4-4.21 Land Development Strategies for TDM will be evaluated and recommended at each stage of the development process for legislative applications, including at traffic study scoping stage to evaluate opportunities to mitigate transportation system impac ts deriving from proposed uses. 4-4.22 Trip Reductions TDM-based trip reductions are not anticipated in the rural area, except in the Towns. For TDM policies within the Towns, please refer to the Town Plans. 4-4.23 Recommended Improvements TDM will be facilitated throug h provision of facilities needs to accommodate programs, including but not limited to: park- and-ride lots, bike racks, carpool and vanpool parking spaces, workplace TDM information displays, regional bicycle and pedestrian facilities, private shuttle services, and financial support of County TDM programs. 4-4.24 County Efforts The County will encourage employers to support alternative travel modes by engaging employers, proving County staff support, and encouraging adoption of private TDM programs. 4-4.25 Shared Rides The County will promote vanpooling and carpooling through public and private programs in order to encourage more efficient commuting and better use of the County's roadways. 4-4.26 Telework The County will encourage public and private entities to provide opportunit ies for employees to telework, hold alternative hours, or provide opportunities for a compressed work schedule in order to improve travel along the County's roadways. Towns and Joint Land Management Areas (JLMAs) Each of Loudoun County’s seven incorporated towns – Hamilton, Hillsboro, Leesburg, Lovettsville, Middleburg, Purcellville and Round Hill – control their own transportation planning functions within their corporate limits. Additionally, due to their larger populations, both the Town of Leesburg and the Town of Purcellville are responsible for the maintenance and operation of all public roads within their boundaries. However, the County works cooperatively with each Town regarding transportation matters both within the Towns and in unincorporated ar eas outside the Towns’ boundaries. Joint Land Management Areas (JLMAs) have been established by the County as urban growth boundaries around four of the Towns: Hamilton, Leesburg, Purcellville, and Round Hill. JLMA boundaries define the planned ultimate extent of Town municipal water and sewer systems. Towns and JLMAs Policies 4-5.1 Coordination The County will coordinate development of plans and design of all transportation facilities within JLMA areas with the associated Town, and will seek opportunities to provide comment and coordination during Town transportation planning and design efforts. 4-5.2 Town Plans Development in the JLMAs should refer to the associated Town JLMA plan for policy and strategy related to connectivity of the transportation network. Proposed connections outside of the JLMA will be subject to the plans and policies for the associated Policy Area as defined in this plan. 4-5.3 Connectivity The County will work with the Towns to ensure seamless connections and continuous networks between the Towns and surrounding portions of the County as appropriate based upon other County policies and plans. 4-5.4 Traffic Management The County will work with the Towns to strive for completion of a functional and dependable transportation system, while respecting the historic nature and aesthetic qualities of the Towns. 4-5.5 Land Development The County will work with the Towns to complete joint evaluations of land development applications that are located near Town boundaries or that would have substantial transportation impacts on both Town and County networks. 4-5.6 Plan Coordination Town and JLMA transportation improvmeents will meet the policies and intent of this document as well as other policies of the Comprehensive Plan. Chapter 5 – Air Travel Air t ravel is an integral component of Loudoun County’s overall transportation system. Washington Dulles International Airport (IAD) is one of the most utilized airports in the United States. It offers connections to international destinations and provides a critical economic engine for business and cargo movement with the County and the larger Washington, DC region. Leesburg Executive Airport is one of the largest non-commercial airports in the Washington region and supports both a burgeoning corporate market and recreational fliers. Air travel also occurs from localized facilities such as helipads, which can be used for emergency services as well as to provide high-speed travel options for businesses and individuals. Washington Dulles International Airport Washington Dulles International Airport (Dulles Airport) is a critical component to success of the County’s entire comprehensive plan. In 2016, 264,785 flights operated out of Dulles Airport serving nearly 22,000,000 passengers , including 7,473,890 international travelers , each arriving and departing through the airport’s Loudoun County terminal buildings. Access to Dulles Airport is provided by the Dulles Airport Access Road, which connects to Route 28 and the Dulles Greenway for connections to Loudoun County. Transit access is provided by WMATA via the Wiehle-Reston East Station until the completion of the Dulles Corridor Metrorail Project, at which time rail access will connect travelers to the airport, providing access to locations along the rail line within Loudoun County. At this time, bicycle and pedestrian connections are not provided to the airport. In addition, this plan calls for extension of the Air and Space Museum Parkway as an arterial corridor between Route 28 and Loudoun County Parkway, enhancing mobility for air travelers, museum visitors, and daily commuters into and out of southern Loudoun County. Dulles Airport also features the Smithsonian Institute’s Udvar-Hazy Air and Space Museum in the southeast corner of the airport. This cultural center is easily accessed from Loudoun County via Route 28 and US Route 50 via Air and Space Museum Parkway. Leesburg Executive Airport Leesburg Executive Airport is a general aviation facility. T he airport supports 115,000 ann ual arrivals and departures, with 250 aircraft stationed at the facility. The airport also features minimum charter operations and repair services. Its 5,500- foot long runway is planned for extension in the future to support the airport’s growth and expansion. Private Air Travel Facilities Aside from airports, air travel can be facilitated via heliports, helipads, and other private facilities. These facilities can support emergency safety and medical services, economic development, and decreased demand for travel along County roads. While not common, such facilities do exist throughout the County and serve a role in supporting mobility goals. AIR TRAVEL POLICIES 5-1.1 Intent The County supports the growth and development of Washington Dulles International Airport and Leesburg Executive Airport. 5-1.1 Coordination The County will coordinate development of plans and design of transportation facilities along the boundaries of the airports with MWAA, VDOT, Fairfax County, the Town of Leesburg, and other agencies as appropriate . The County will seek opportunities to provide comment and coordination with airport officials during airport planning and design efforts. 5-1.2 Access To improve access to Washington Dulles International Airport, the County supports and will work to implement the Dulles Loop, consisting of limited access conditions for VA Route 28, VA Route 606, and a southern connector (either US Route 50 or an extension of Air and Space Museum Parkway), working to identify where airport access points would be logically located or improved along these corridors. 5-1.3 Multimodal Access The County will work to enhance access to the airports through improvements to nearby roadways, provision of transit services, and options for bicycle and pedestrian access. 5-1.4 Transit Access The County will work in coordination with the other jurisdictions surrounding Dulles Airport to conduct a joint transit study to determine if a fixed guideway transit system is feasible along the Route 606, Route 28, US Route 50, or other corridors in the vicinity of Dulles Airport. 5-1.5 Expansion The County will work with the airports to design transportation facilities that facilitate planned growth at both airports, including runway expansions and freight connectivity. 5-1.6 Private Air Travel The County supports development of air travel facilities such as helipads for emergency services and business development , in adherence to local, state, and federal regulations. See Chapter 8 of this document for policies related to mitigation of noise impacts. X X X X ") X#Y X X X X X X ") X ") X X X X X ") ") ") XXXX X X X X#Y X X X X X X X X X X ") X X#Y ") X ") ") ") ") ") ") X X#Y X#YX#Y X X XX XX X X X XX X ") ") ") ") ") *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *##*## *## *## *## *## *## *## *## *## *##*## *## *## *## *## *##*## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *##*## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *##*## *## *## *## *## *## *## *## *## *## *## *## *##*## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## MOUNTAIN RD SILCOTT SPRINGS RD HILLSBORO RD MOUNTAIN RD ALGONKIANPKWY DULLES GREENWAY WILLISVILLE RD POLAND RD NORTHSTAR BLVD SYCOLIN RD MILL ER EDW ARDS FERRY RD HIGHST BATTLEFIELD PKWY BELMONT RIDGE RD SULLYRD WOODGROVERD LOUDOUN CHARLES TOWN PKE JAMES MONROE HWY LOYALTY RD BERLIN TPKE HARPERS FERRY RD HARMONY CHURCH RD LIME KILN RD EVERGREENMILLS RD ST. CHARLES TOWN PKE AIRMONT HARRY BYRD HW Y GREENGARDEN RD DULLES GREENW AY IRISH CORNER RD E. COLONIAL HW Y SNICKERSVILLE TPKE ALGONKIAN PKW Y CLARKESGAP RD W . COLONIAL HW Y BERLIN TPKE TAYLORSTOWN RD BRADDOCK RD JOHN MOSBY HW Y PURCELLVILLE S.COL RD EDGEW ATER ST STERLING BLVD BRADDOCK RD COCHRAN M ILL RD S. KING ST HAMILTON STATION RD BELMONT RIDGE RD HARRY BYRD HW Y E. LOUDOUN ST STONYPOINT RD SULLY R D HARRY BYRD HW Y E. M AIN ST MILLVILLE RD SMITHSWITCH RD ASH BURN FARM PKW Y JAMESMONROEHWY DULLES ACCESS RD SPRING SYCOLIN RD HARRY BYRD HW Y SHREV E PORT DR CREIGHTON RD EVERGREEN SOUTH 32ND ST BELMONTRIDGERDRUSSEL L LEESBURG BYP E. MARKET ST JOHN M OSBY HW Y PKW Y BROADLANDS BLVD LOUDOUNCO.PKWY EVENINGSTAR DR FORT EVANS RD BATTLEFIELD PKW Y W AXPOOL RD BLVD W OODLAND RD OLD OX RD CROSON LA LEESBURG BYP JOHN M OSBY HW Y CASCADES GREENW AY RIVERSIDE SHAW RD DR GLENN DR NORTH STAR BLVD INNOVATION AVE JEFFERSON PKE PACIFIC FARMW ELL RD HAY RD PKWY ROCKHILLR D RU S S E LL BRAN C H PKW Y HARRY BYRD H W Y PKW Y W .M AIN ST LOUDOUN CO. PKWY CASCADES PKWY JAMES MONROE HWY PKWY BERLIN TPKE GLO UCESTER PKW Y KINCAIDBLVD DAVIS DR ASHBURN RD LOVETTSVILLE RD RIVER W YNRIDGE BLVD CEDARSPK WY BLVD HOW SERS HOPE P KWY BLVD PLEASANT DULLES VALLEYRD SOUTHRIDING TALL PKW Y DR MOOREVIEW PKWY CLAIBORNEGLOUCESTER PKWY CITYCENTER PALISADE SUG ARLAND RD BLVD BLVD MILLS RD EAST GATEVIEW DR CIDER MILL RD POLANDRD BRANCHDR ARCOLATRURO PARISHDR CREEK PKWY MILLTOWN RD FAULKNER PKWY CO. RD GUM GUM SPRINGRD BRANCH NO RTH FO RK RDLINCOLN RD RD LINCOLN WATERMILL RD R D RD RD BLOOMFIELD FOGGY B OTTOM RD AIRMONT FOXCROFT RD RD FOXCROFT ST.LOUIS RD LOUIS RD SNICKERSV ILLE TPKE W E STWIND PACIFICBLVD DEMOTTDR "M "M "M "M Mon tgomeryCounty,M D FrederickCounty,MD JeffersonCounty,WV ClarkeCounty,VA Fauq uier County,V A PrinceWilliam Co unty,VA Potom acRiver FairfaxCounty,VA Innovation Center Metrorail Station ")H N. KING ST CHESTERTON STPORTSMOUTH BLVD SYCOLIN CREEK CO NNEC TOR WATSON RD EVERFIELD DR LENAHRD TRAILHEAD DR FLEETWOOD RD OLYMPIA DR RYAN RD LEGACY PARK DR WAXPOOLRD GRASSLAND GROVE DR FOLEY BRANCH BLVD CEDAR RIDGE BLVD DR RIDINGCENTER DU LLES WESTBLVD JOHN MOSBY HW Y US 50 ALTERNATE ELKLICKRD GREENSTONE DR DESTINYDR SUMMERALL DR ARLING TO N OAKS DR MILLSTREAM DR STONE SPRINGSBLVDMILLS EVERGREEN RD EVERGREEN RIDGEDR RESERVE LOUDO U N DR STUKELY DR LADBROOK DR MERCURE CIR QUICKSILVER DR W CHURCH RD M AGNOLIA DR VICTORIA BLOSSOM DR STN DR EMAPLEAVE SFILLM ORE AVE CIRCLE DR NLINCOLNAVE W HOLLYAVE E FREDERICKDR W FREDERICK DR AUGUSTADR COTTAGE AVESUGARLAND RUN DR WHITEWATERDR SAULTY DR LOWESISLAND BLVD HAR D WOOD FOR ESTDRRIVER BANKST TRIPLE SEVEN RD COUNTRYSIDE CROM W ELL RD BLVD ATLANTIC W ARP DR DULLES CTR BLVD RIVERSIDE PKWY GEORGE W ASHINGTONBLVD ATW ATER DR EXCHANGE ST MARBLEHEAD DR W OODRIDGE PKWY ASHBURN VILLAGE BLVD CHRISTIANA DR FINCASTLE DR CROSSROADS DR D R WIN D M ILL HEMINGWAYDR RED RUM DR W AXPO OL RD N-S CONN NOKES BLVD HALEYBIRD DR RIDGETOPCIR W OODSHIRE DR FAIR BART H O LO MEW DR BENEDICT DR PRENTICE DR RD DR RELOCATION DR M ORAN RD DRESDEN ST ACADIA LN BRODERICK RANDOLPH DR BARRISTERST DEVIN SHAFR O N DR ")F ")E ")C ")B COMPASS CREEK BLVD PKW Y CROSSTRAILBLVD TRANSITION SUBURBAN SUBURBAN URBAN JLMA JLMA JLMA RTE 7 NORTH COLLECTO R RD DR LOUDOUN STATION DR METRO CTR DR MOOREFIELD BLVD CLAUDE MOORE DR OLD RYANRD CHARITABLE ST STATEST SHELLHORN CENTERG ATE DR PARK DR JEFFERSON LOCKRIDGE RD STERLING S BLVD POTOMAC VIEW RD BELFORTPAR K DR W ADE DR CARTERS SCHOOLRD DULLES AIRPORT W ACCESS RD OLD OX RD ROCK WAY HAVEN O VER LAN D DR PEBBLE RUNPL M ID D LEFIELD DR BROADMORE DR HARRY BYRD HW Y DEERFIELD AVE LANSDOWNE ")J ")G PINEBROOKRD ROUND HILL PURCELLVILLE HAMILTON LEESBURG LOVETTSVILLE MIDDLEBURG WASHINGTON DULLES INTERNATIONAL AIRPORT HILLSBORO ")D ")I ")A ")K Dulles Airport Metrorail Station Loudoun Gateway Metrorail Station Ashburn Metrorail Station St. Louis Aldie Aldie Mountain Bluemont Paeonian Springs Ashburn Waterford Lincoln Lucketts Philomont Neersville Taylorstown Loudoun Heights Roadway General Notes: (I) Planned roadway alignments shown are conceptual and subject to further engineering. Alignments will be further refined as part of the planning process and through the land development application process. (II) This map is part of the Countywide Transportation Plan, a component of the Comprehensive Plan, which includes more detail regarding roadway design and features. (III) Refer to specific Town Plans for transportation plans within town limits. Roads within Town boundaries shown on this plan , except Routes 7 and 15, are for reference purposes only. (IV) Planned freeways along Routes 7, 28, and 50 will be considered for managed lanes through further study. (V) While intersection and other localized improvements are not shown on this map, such improvements are considered to be part of the County's Comprehensive Plan. (VI) This is a planning document. Future County and VDOT improvements made based on this plan will meet all requirements for public input prior to construction. Roadway Locational Notes: (A) Design of the connection between US Route 15 and North King Street to be determined as part of future study. (B) Ultimate access along the Route 7 corridor between Route 28 and Dranesville to be identified through future corridor study. (C) Ultimate access along Waxpool Road between Farmwell Road and Route 28 to be identified through future corridor study. (D) Along Route 606, the interchanges at the Dulles Greenway and at Randolph Drive will need to be integrated into a single interchange complex. (E) The alignment of Pacific Boulevard from Old Ox Road to Innovation Avenue will be determined as part of a future study in coordination with MWAA. (F) Along Route 28, the interchanges at Route 606, Innovation Avenue, the Dulles Greenway, and the Dulles Tolls Road will be studied for integration through a future corridor design study. (G) Access to and through the Western Lands of Dulles Airport to be coordinated with MWAA. (H) Along Loudoun County Parkway, the interchanges at the Evergreen Mills Road and at Dulles West Boulevard will need to be integrated into a single interchange complex. (I) Access to Stone Springs Blvd will be coordinated with Gum Spring Road interchange. (J)The western terminus of US Route 50 Alternate and associated connections with US Route 50 and Loudoun County Parkway to be determined through future study. (K) Access management along US Route 50 and US Route 50 Alternate, including considerations of limited access, connections to Route 28, and potential southern access to Dulles Airport to be evaluated by future study in coordination with MWAA. Virginia Location Map 0123 Miles Fairfax County, VA DRAFT 04 , 0 0 0 Meters 2,000 1,000 3,000 2040 COUNTYWIDE TRANSPORTATION ROADWAY PLAN MAP MARCH XX, 2018 DRAFT ROADWAY ELEMENTS LEGEND Refer to Chapter 3 for Ultimate Roadway Geometry CTP ROADS (See Note IV) (See Note III) # OF LANES 2040 PLANNED Refer to Town Plan 10 Lanes 8 Lanes 6 Lanes 4 Lanes 2 Lanes Freeway μ Washington & Old Dominion Trail Metrorail Station Metrorail Silver Line Proposed Scenic Byway Virginia Scenic Byway Existing/Planned Overpass Existing/Planned Partial Interchange Existing/Planned Interchange Village Conservation Overlay District "M *## *## X X#Y ") X X X X ") X#Y X X X X X X ") X ") X X X X X ") ") ") XXXX X X X X#Y X X X X X X X X X X ") X X#Y ") X ") ") ") ") ") ") X X#Y X#YX#Y X X XX XX X X X XX X ") ") ") ") ") *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *##*## *## *## *## *## *## *## *## *## *##*## *## *## *## *## *##*## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *##*## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *##*## *## *## *## *## *## *## *## *## *## *## *## *##*## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## MOUNTAIN RD SILCOTT SPRINGS RD HILLSBORO RD MOUNTAIN RD ALGONKIANPKWY DULLES GREENWAY WILLISVILLE RD POLAND RD NORTHSTAR BLVD SYCOLIN RD MILL ER EDW ARDS FERRY RD HIGHST BATTLEFIELD PKWY BELMONT RIDGE RD SULLYRD WOODGROVERD LOUDOUN CHARLES TOWN PKE JAMES MONROE HWY LOYALTY RD BERLIN TPKE HARPERS FERRY RD HARMONY CHURCH RD LIME KILN RD EVERGREENMILLS RD ST. CHARLES TOWN PKE AIRMONT HARRY BYRD HW Y GREENGARDEN RD DULLES GREENW AY IRISH CORNER RD E. COLONIAL HW Y SNICKERSVILLE TPKE ALGONKIAN PKW Y CLARKESGAP RD W . COLO NIAL HW Y BERLIN TPKE TAYLORSTOWN RD BRADDOCK RD JOHN MOSBY HW Y PURCELLVILLE S.COL RD EDGEW ATER ST STERLING BL VD BRADDOCK RD COCHRAN M ILL RD S. KING ST HAMILTON STATION RD BELMONT RIDGE RD HARRY BYRD HW Y E. LOUDOUN ST STONYPOINT RD SULLY RD HARRY BYRD HW Y E. M AIN ST MILLVILLE RD SMITHSWITCH RD ASHBURN FARM PKW Y JAMESMONROEHWY DULLES ACCESS RD SPRING SYCOLIN RD HARRY BYRD HW Y SHREV E PORT DR CREIGHTON RD EVERGREEN SOUTH 32ND ST BELMONTRIDGERDRUSSEL L LEESB URG BYP E. MARKET ST JOHN M OSBY HW Y PKW Y BROADLANDS BLVD LOUDOUNCO.PKWY EVENING STAR DR FORT EVANS RD BATTLEFIELD PKW Y W AXPOOL RD BLVD W OODLAND RD OLD OX RD CROSON LA LEESBURG BYP JOHN M OSBY HW Y CASCADES GREENW AY RIVERSIDE SHAW RD DR GLENN DR NORTH STAR BLVD INNOVATION AVE JEFFERSON PKE PACIFIC FARMW ELL RD HAY RD PKWY ROCKHILLRD RU S S E LL BRAN C H PKW Y HARRY BYRD H W Y PKW Y W .M AIN ST LOUDOUN CO. PKWY CASCADES PKWY JAMES MONROE HWY PKWY BERLIN TPKE GLOUCESTER PKW Y KINCAIDBLVD DAVIS DR ASHBURN RD LOVETTSVILLE RD RIVER W YNRIDG E BLVD CEDARSPKWY BLVD HO W SERS HOPE PKWY BLVD PLEASANT DULLES VALLEYRD SOUTHRIDING TALL PK W Y DR MOOREVIEW PKWY CLAIBORNEGLOUCESTER PKWY CITYCENTER PALISADE SUG ARLAN D RD BLVD BLVD MILLS RD EAST GATEVIEW DR CIDER MILL RD POLANDRD BRANCHDR ARCOLATRURO PARISHDR CREEK PKWY MILLTOWN RD FAULKNER PKWY CO. RD GUM GUM SPRINGRD BRANCH NO RTH FO RK RDLINCOLN RD RD LINCOLN WATERMILL RD R D RD RD BLOOMFIELD FOGGY B OTTOM RD AIRMONT FOXCROFT RD RD FOXCROFT ST.LOUIS RD LOUIS RD SNICKERSV ILLE TPKE W E STWIND PACIFICBLVD DEMOTTDR "M "M "M "M Mon tgomeryCounty,M D FrederickCounty,MD JeffersonCounty,WV Clarke County,VA Fauquier Coun ty,VA PrinceWilliam Co unty,VA Potom acRiver FairfaxCounty,VA Innovation Center Metrorail Station N. KING ST CHESTERTON STPORTSMOUTH BLVD SYCOLIN CREEK CONNEC TOR WATSON RD EVERFIELD DR LENAHRD TRAILHEAD DR FLEETWOOD RD LENAH FARM CONNECTOR OLYMPIA DR RYAN RD LEGACY PARK DR WAXPOOLRD GRASSLAND GROVE DR FOLEY BRANCH DR CEDAR RIDGE BLVD DR RIDINGCENTER DU LLES WESTBLVD JOHN MOSBY HW Y US 50 ALTERNATE ELKLICKRD GREENSTONE DR DESTINYDR SUMMERALL DR ARLING TON OAKS DR MILLSTREAM DR STONE SPRINGSBLVDMILLS EVERGREEN RD EVERGREEN RIDGEDR RESERVE LO UDO U N DR STUKELY DR LADBROOK DR MERCURE CIR QUICKSILVER DR W CHURCH RD MA GNOLIA DR VICTORIA BLOSSOM DR STN DR EMAPLEAVE SFILLM ORE AVE CIRCLE DR NLINCOLNAVE W HOLLYAVE E FREDERICKDR W FREDERICK DR AUGUSTADR COTTAGE AVESUGARLAND RUN DR WHITEWATERDR SAULTY DR LOWESISLAND BLVD HAR D WOOD FOR ESTDRRIVER BANKST TRIPLE SEVEN RD COUNTRYSIDE CROM W ELL RD BLVD ATLANTIC W ARP DR DULLES CTR BLVD RIVERSIDE PKWY GEORGE W ASHINGTONBLVD ATW ATER DR EXCHANGE ST MARBLEHEAD DR W OODRIDGE PKWY ASHBURN VILLAGE BLVD CHRISTIANA DR FINCASTLE DR CROSSROADS DR D R WIND M ILL HEMINGWAYDR RED RUM DR W AXPO OL RD N-S CONN NOKES BLVD HALEYBIRD DR RIDGETOPCIR W OODSHIRE DR FAIR BAR TH O LOMEW D R BENEDICT DR PRENTICE DR RD DR RELOCATION DR MORAN RD DRESDEN ST ACADIA LN BRODERICK RANDOLPH DR BARRISTERST DEVIN SHAFR ON DR COMPASS CREEK BLVD PKW Y CROSSTRAILBLVD TRANSITION SUBURBAN SUBURBAN URBAN JLMA JLMA JLMA RTE 7 NORTH COLLECTO R RD DR LOUDOUN STATION DR METRO CTR DR MOOREFIELD BLVD CLAUDE MOORE DR OLD RYANRD CHARITAB LE ST STATEST SHELLHORN CENTERG ATE DR PARK DR JEFFERSON LOCKRIDGE RD STERLING S BLVD POTOMAC VIEW RD BELFORTPAR K DR W ADE DR CARTERS SCHOOLRD DULLES AIRPORT W ACCESS RD OLD OX RD ROCK WAY HAVEN O VERLAND DR PEBBLE RUNPL M ID D LEFIELD DR BROADMORE DR HARRY BYRD HW Y DEERFIELD AVE LANSDOWNE PINEBROOKRD ROUND HILL PURCELLVILLE HAMILTON LEESBURG LOVETTSVILLE MIDDLEBURG WASHINGTON DULLES INTERNATIONAL AIRPORT HILLSBORO Dulles Airport Metrorail Station Loudoun Gateway Metrorail Station Ashburn Metrorail Station St. Louis Aldie Aldie Mountain Bluemont Paeonian Springs Ashburn Waterford Lincoln Lucketts Philomont Neersville Taylorstown Loudoun Heights Virginia Location Map 0123 Miles Fairfax County, VA DRAFT 04 , 0 0 0 Meters 2,000 1,000 3,000 2040 COUNTYWIDE TRANSPORTATION PLAN PROPOSED CHANGES FROM 2010 CTP MARCH XX, 2018 DRAFT Refer to Chapter 3 for Ultimate Roadway Geometry ROADWAY ELEMENTS LEGEND Currently planned Existing roadway new to CTP Unbuilt roadway new to CTP Change to alignment or lanes on roads shown on the 2010 CTP Washington & Old Dominion Trail Metrorail Station Metrorail Silver Line Proposed Scenic Byway Virginia Scenic Byway Existing/Planned Overpass Existing/Planned Partial Interchange Existing/Planned Interchange Village Conservation Overlay District "M *## *## X X#Y ") μ X X X X ") X#Y X X X X X X ") X ") X X X X X ") ") ") XXXX X X X X#Y X X X X X X X X X X ") X X#Y ") X ") ") ") ") ") ") X X#Y X#YX#Y X X XX XX X X X XX X ") ") ") ") ") *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *##*## *## *## *## *## *## *## *## *## *##*## *## *## *## *## *##*## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *##*## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *##*## *## *## *## *## *## *## *## *## *## *## *## *##*## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## *## MOUNTAIN RD SILCOTT SPRINGS RD HILLSBORO RD MOUNTAIN RD ALGONKIANPKWY DULLES GREENWAY WILLISVILLE RD POLAND RD NORTHSTAR BLVD SYCOLIN RD MILL ER EDW ARDS FERRY RD HIGHST BATTLEFIELD PKWY BELMONT RIDGE RD SULLYRD WOODGROVERD LOUDOUN CHARLES TOWN PKE JAMES MONROE HWY LOYALTY RD BERLIN TPKE HARPERS FERRY RD HARMONY CHURCH RD LIME KILN RD EVERGREENMILLS RD ST. CHARLES TOWN PKE AIRMONT HARRY BYRD HW Y GREENGARDEN RD DULLES GREENW AY IRISH CORNER RD E. COLONIAL HW Y SNICKERSVILLE TPKE ALGONKIAN PKW Y CLARKESGAP RD W . COLONIAL HW Y BERLIN TPKE TAYLORSTOWN RD BRADDOCK RD JOHN MOSBY HW Y PURCELLVILLE S.COL RD EDGEW ATER ST STERLING BLVD BRADDOCK RD COCHRAN M ILL RD S. KING ST HAMILTON STATION RD BELMONT RIDGE RD HARRY BYRD HW Y E. LOUDOUN ST STONYPOINT RD SULLY RD HARRY BYRD HW Y E. M AIN ST MILLVILLE RD SMITHSWITCH RD ASH BURN FARM PKW Y JAMESMONROEHWY DULLES ACCESS RD SPRING SYCOLIN RD HARRY BYRD HW Y SHREV E PORT DR CREIGHTON RD EVERGREEN SOUTH 32ND ST BELMONTRIDGERDRUSSEL L LEESBURG BYP E. MARKET ST JOHN M OSBY HW Y PKW Y BROADLANDS BLVD LOUDOUNCO.PKWY EVENINGSTAR DR FORT EVANS RD BATTLEFIELD PKW Y W AXPOOL RD BLVD W OODLAND RD OLD OX RD CROSON LA LEESBURG BYP JOHN M OSBY HW Y CASCADES GREENW AY RIVERSIDE SHAW RD DR GLENN DR NORTH STAR BLVD INNOVATION AVE JEFFERSON PKE PACIFIC FARMW ELL RD HAY RD PKWY ROCKHILLR D RU S S E LL BRAN C H PKW Y HARRY BYRD H W Y PKW Y W .M AIN ST LOUDOUN CO. PKWY CASCADES PKWY JAMES MONROE HWY PKWY BERLIN TPKE GLO UCESTER PKW Y KINCAIDBLVD DAVIS DR ASHBURN RD LOVETTSVILLE RD RIVER W YNRIDGE BLVD CEDARSPK WY BLVD HOW SERS HOPE P KWY BLVD PLEASANT DULLES VALLEYRD SOUTHRIDING TALL PKW Y DR MOOREVIEW PKWY CLAIBORNEGLOUCESTER PKWY CITYCENTER PALISADE SUG ARLAND RD BLVD BLVD MILLS RD EAST GATEVIEW DR CIDER MILL RD POLANDRD BRANCHDR ARCOLATRURO PARISHDR CREEK PKWY MILLTOWN RD FAULKNER PKWY CO. RD GUM GUM SPRINGRD BRANCH NO RTH FO RK RDLINCOLN RD RD LINCOLN WATERMILL RD R D RD RD BLOOMFIELD FOGGY B OTTOM RD AIRMONT FOXCROFT RD RD FOXCROFT ST.LOUIS RD LOUIS RD SNICKERSV ILLE TPKE W E STWIND PACIFICBLVD DEMOTTDR "M "M "M "M Mon tgomeryCounty,M D FrederickCounty,MD JeffersonCounty,WV ClarkeCounty,VA Fauquier Cou nty,V A PrinceWilliam Co unty,VA Potom acRiver FairfaxCounty,VA Innovation Center Metrorail Station N. KING ST CHESTERTON STPORTSMOUTH BLVD SYCOLIN CREEK CO NNECTOR WATSON RD EVERFIELD DR LENAHRD TRAILHEAD DR FLEETWOOD RD OLYMPIA DR RYAN RD LEGACY PARK DR WAXPOOLRD GRASSLAND GROVE DR FOLEY BRANCH DR CEDAR RIDGE BLVD DR RIDINGCENTER DU LLES WESTBLVD JOHN MOSBY HW Y US 50 ALTERNATE ELKLICKRD GREENSTONE DR DESTINYDR SUMMERALL DR ARLING TO N OAKS DR MILLSTREAM DR STONE SPRINGSBLVDMILLS EVERGREEN RD EVERGREEN RIDGEDR RESERVE LOUDO U N DR STUKELY DR LADBROOK DR MERCURE CIR QUICKSILVER DR W CHURCH RD M AGNOLIA DR VICTORIA BLOSSOM DR STN DR EMAPLEAVE SFILLM ORE AVE CIRCLE DR NLINCOLNAVE W HOLLYAVE E FREDERICKDR W FREDERICK DR AUGUSTADR COTTAGE AVESUGARLAND RUN DR WHITEWATERDR SAULTY DR LOWESISLAND BLVD HAR D WOOD FOR ESTDRRIVER BANKST TRIPLE SEVEN RD COUNTRYSIDE CROM W ELL RD BLVD ATLANTIC W ARP DR DULLES CTR BLVD RIVERSIDE PKWY GEORGE W ASHINGTONBLVD ATW ATER DR EXCHANGE ST MARBLEHEAD DR W OODRIDGE PKWY ASHBURN VILLAGE BLVD CHRISTIANA DR FINCASTLE DR CROSSROADS DR D R WIN D M ILL HEMINGWAYDR RED RUM DR W AXPO OL RD N-S CONN NOKES BLVD HALEYBIRD DR RIDGETOPCIR W OODSHIRE DR FAIR BART H O LO MEW DR BENEDICT DR PRENTICE DR RD DR RELOCATION DR M ORAN RD DRESDEN ST ACADIA LN BRODERICK RANDOLPH DR BARRISTERST DEVIN SHAFR O N DR COMPASS CREEK BLVD PKW Y CROSSTRAILBLVD TRANSITION SUBURBAN SUBURBAN URBAN JLMA JLMA JLMA RTE 7 NORTH COLLECTO R RD DR LOUDOUN STATION DR METRO CTR DR MOOREFIELD BLVD CLAUDE MOORE DR OLD RYANRD CHARITABLE ST STATEST SHELLHORN CENTERG ATE DR PARK DR JEFFERSON LOCKRIDGE RD STERLING S BLVD POTOMAC VIEW RD BELFORTPAR K DR W ADE DR CARTERS SCHOOLRD DULLES AIRPORT W ACCESS RD OLD OX RD ROCK WAY HAVEN O VER LAN D DR PEBBLE RUNPL M ID D LEFIELD DR BROADMORE DR HARRY BYRD HW Y DEERFIELD AVE LANSDOWNE PINEBROOKRD ROUND HILL PURCELLVILLE HAMILTON LEESBURG LOVETTSVILLE MIDDLEBURG WASHINGTON DULLES INTERNATIONAL AIRPORT HILLSBORO Dulles Airport Metrorail Station Loudoun Gateway Metrorail Station Ashburn Metrorail Station St. Louis Aldie Aldie Mountain Bluemont Paeonian Springs Ashburn Waterford Lincoln Lucketts Philomont Neersville Taylorstown Loudoun Heights Roadway General Notes: (I) Planned roadway alignments shown are conceptual and subject to further engineering. Alignments will be further refined as part of the planning process and through the land development application process. (II) This map is part of the Countywide Transportation Plan, a component of the Comprehensive Plan, which includes more detail regarding roadway design and features. (III) Refer to specific Town Plans for transportation plans within town limits. Roads within Town boundaries shown on this plan, except Routes 7 and 15, are for reference purposes only. (IV) Planned freeways along Routes 7, 28, and 50 will be considered for managed lanes through further study. (V) While intersection and other localized improvements are not shown on this map, such improvements are considered to be part of the County's Comprehensive Plan. (VI) This is a planning document. Future County and VDOT improvements made based on this plan will meet all requirements for public input prior to construction. Bicycle and Pedestrian General Notes: (i) Accomodations for bicycles and pedestrians are anticipated on all roads shown on this map, as defined herein. (ii) Within the Rural Policy Area, sidewalks should be provided along both sides of all roads within Villages. (iii) Please refer to the street sections in the road design toolkit for further detail regarding facility design. (iv) AASHTO recommends that shared travel of bicycles and motor vehicles occur only on roads with speed limits of 35 MPH or lower. 0123 Miles Fairfax County, VA DRAFT 04 , 0 0 0 Meters 2,000 1,000 3,000 2040 COUNTYWIDE TRANSPORTATION BICYCLE AND PEDESTRIAN PLAN MAP MARCH XX, 2018 DRAFT Virginia Location Map Refer to Chapter 3 for Ultimate Roadway Geometry ROADWAY ELEMENTS Not Assigned Shared lane with pedestrian facilities provided as called for by geographic policy area Striped bike lane with pedestrian facilities provided as called for by geographic policy area Trail on one side of the road and sidewalk on the other side of the road Trails on both sides of the road (Urban/Suburban/Transition) Trail on one side of the road (Rural) Washington & Old Dominion Trail Regional Trail LEGEND Metrorail Station Metrorail Silver Line Proposed Scenic Byway Virginia Scenic Byway Existing/Planned Overpass Existing/Planned Partial Interchange Existing/Planned Interchange Village Conservation Overlay District "M *## *## X X#Y ") μ

Source: Loudoun County website. First collected Oct 5, 2026.